/*
* Device Tree Source for am3517 SoC
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include "omap3.dtsi"
/ {
aliases {
serial3 = &uart4;
can = &hecc;
};
cpus {
cpu: cpu@0 {
/* Based on OMAP3630 variants OPP50 and OPP100 */
operating-points-v2 = <&cpu0_opp_table>;
clock-latency = <300000>; /* From legacy driver */
};
};
cpu0_opp_table: opp-table {
compatible = "operating-points-v2-ti-cpu";
syscon = <&scm_conf>;
/*
* AM3517 TRM only lists 600MHz @ 1.2V, but omap36xx
* appear to operate at 300MHz as well. Since AM3517 only
* lists one operating voltage, it will remain fixed at 1.2V
*/
opp50-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <1200000>;
opp-supported-hw = <0xffffffff 0xffffffff>;
opp-suspend;
};
opp100-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1200000>;
opp-supported-hw = <0xffffffff 0xffffffff>;
};
};
ocp@68000000 {
am35x_otg_hs: am35x_otg_hs@5c040000 {
compatible = "ti,omap3-musb";
ti,hwmods = "am35x_otg_hs";
status = "disabled";
reg = <0x5c040000 0x1000>;
interrupts = <71>;
interrupt-names = "mc";
};
davinci_emac: ethernet@5c000000 {
compatible = "ti,am3517-emac";
ti,hwmods = "davinci_emac";
status = "disabled";
reg = <0x5c000000 0x30000>;
interrupts = <67 68 69 70>;
syscon = <&scm_conf>;
ti,davinci-ctrl-reg-offset = <0x10000>;
ti,davinci-ctrl-mod-reg-offset = <0>;
ti,davinci-ctrl-ram-offset = <0x20000>;
ti,davinci-ctrl-ram-size = <0x2000>;
ti,davinci-rmii-en = /bits/ 8 <1>;
local-mac-address = [ 00 00 00 00 00 00 ];
clocks = <&emac_ick>;
clock-names = "ick";
};
davinci_mdio: mdio@5c030000 {
compatible = "ti,davinci_mdio";
ti,hwmods = "davinci_mdio";
status = "disabled";
reg = <0x5c030000 0x1000>;
bus_freq = <1000000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&emac_fck>;
clock-names = "fck";
};
uart4: serial@4809e000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
status = "disabled";
reg = <0x4809e000 0x400>;
interrupts = <84>;
dmas = <&sdma 55 &sdma 54>;
dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
omap3_pmx_core2: pinmux@480025d8 {
compatible = "ti,omap3-padconf", "pinctrl-single";
reg = <0x480025d8 0x24>;
#address-cells = <1>;
#size-cells = <0>;
#pinctrl-cells = <1>;
#interrupt-cells = <1>;
interrupt-controller;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0xff1f>;
};
hecc: can@5c050000 {
compatible = "ti,am3517-hecc";
status = "disabled";
reg = <0x5c050000 0x80>,
<0x5c053000 0x180>,
<0x5c052000 0x200>;
reg-names = "hecc", "hecc-ram", "mbx";
interrupts = <24>;
clocks = <&hecc_ck>;
};
/*
* On am3517 the OCP registers do not seem to be accessible
* similar to the omap34xx. Maybe SGX is permanently set to
* "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is
* write-only at 0x50000e10. We detect SGX based on the SGX
* revision register instead of the unreadable OCP revision
* register.
*/
sgx_module: target-module@50000000 {
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x50000014 0x4>;
reg-names = "rev";
clocks = <&sgx_fck>, <&sgx_ick>;
clock-names = "fck", "ick";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x50000000 0x4000>;
/*
* Closed source PowerVR driver, no child device
* binding or driver in mainline
*/
};
};
};
/* Not currently working, probably needs at least different clocks */
&rng_target {
status = "disabled";
/delete-property/ clocks;
};
/* Table Table 5-79 of the TRM shows 480ab000 is reserved */
&usb_otg_hs {
status = "disabled";
};
&iva {
status = "disabled";
};
&mailbox {
status = "disabled";
};
&mmu_isp {
status = "disabled";
};
/include/ "am35xx-clocks.dtsi"
/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
