| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Prevent a possible out-of-bound access and a use-after-free in rather
theoretical situations
- Make no_hash_pointers take effect early
- Some fixes and clean up of the ratelimit KUnit test
* tag 'printk-for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Handle pre-enabled consoles in the top-level register_console()
printk: Fix possible console use-after-free
lib/tests: test_ratelimit: fix stress test thread lifecycle and leak
lib/vsprintf: Make no_hash_pointers take effect early
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Enable Clang context analysis for the nvme host driver, adding
context annotations across core, fabrics, rdma, tcp and pci
- nvmet reservation state exposed through a new namespace-level
debugfs directory, plus ABI documentation for the host sysfs and
target configfs interfaces
- nvme-tcp host memory disclosure fixes on the read path: reject a
read that transferred too few bytes, don't accept C2HData based
on blk_rq_payload_bytes() alone, and fix the R2T case for a read
command
- Parallelize nvme-rdma I/O queue allocation and startup (Surabhi)
- Apple nvme fixes and quirks: page aligned admin queue buffers,
destroy the admin queue on removal, and various DMA/NVMMU
correctness fixes
- A large pile of nvmet and host fixes for out-of-bounds reads,
refcount/resource leaks, and NULL derefs across auth, zns,
passthru, pci-epf, rdma and configfs
- Various other fixes and cleanups
- MD updates via Yu Kuai:
- llbitmap reshape support, the large series wiring exact bitmap
mapping and reshape lifecycle through raid5 and raid10, growing
the page cache in place, and remapping checkpointed bits as
reshape progresses
- raid5 fixes for lockless max_nr_stripes and recovery_offset
accesses, a reshape deadlock with more failed devices than max
degraded, and bitmap batch counter consistency
- Atomic write handling for raid1/raid10, and removal of the
REQ_NOWAIT support from raid1/10/456
- raid5-ppl use-after-free fix in ppl_do_flush()
- A batch of smaller fixes across md core and the bitmap code
- s390/dasd ESE full-track write support and the surrounding
infrastructure, plus enabling CONTEXT_ANALYSIS for s390/block
- RWF_DONTCACHE support for block devices, built on new task-context
bio completion infrastructure, and wiring it up for the iomap and
buffer dropbehind writeback paths
- Async io_uring zone reset all, plus zone management command cleanups
allowing REQ_NOWAIT and tightening conventional zone rejection
- Block integrity refactoring: lift BIP_CHECK_FLAGS to the shared
header, handle nogenerate/noverify properly in fs-integrity, and drop
the blk-integrity.h include from bdev.c
- Split out a new blk_plug.h header
- ublk improvements: add UBLK_F_IO_DESC_SIZE, split request validation
from io_desc init, reject non-power-of-2 zone sizes in SET_PARAMS,
and a series of hardening fixes around map/unmap and auto buf reg
- null_blk cleanups and configfs serialization fixes
- nbd queue freeze removal on the setup paths, and a new
pre_defined_connections module parameter for pre-created devices
- blk-cgroup fixes for the race between policy activation and blkg
destruction, and accounting per-cpu stats over possible CPUs across
blk-stat, iolatency, iocost and kyber
- Various dio fixes: leak on metadata mapping error, validate user
space vectors during extraction, and set dma_alignment from the
backing file for loop and zloop direct I/O
- bio cleanups
- Various other fixes and cleanups all over
* tag 'for-7.3/block-20260819' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (241 commits)
nbd: add pre_defined_connections module parameter for pre-created devices
nbd: remove queue freeze for newly created nbd from netlink path
nbd: factor out a nbd_genl_foreach_sock
nbd: skip queue freeze when setting size at device startup
nbd: remove queue freeze in nbd_add_socket
nbd: clear queue limits on disconnect
nbd: disallow NBD_SET_SOCK on an active device
nbd: simplify find_fallback() by removing redundant logic
blk-mq: add missing call to srcu_barrier() in blk_mq_free_tag_set()
block: mtip32xx: synchronize ioctls with device removal
ublk: avoid teardown retry loop on xarray allocation failure
null_blk: fix UBSAN shift-out-of-bounds when zone_size is 0 or overflows
block: don't include blk-integrity.h in bdev.c
xfs: avoid double deferrals for RWF_DONTCACHE writes
loop: Fix recently introduced lock inversion
block: set QUEUE_FLAG_DYING unconditionally in blk_mark_disk_dead()
swim3: Add missing MODULE_DESCRIPTION
selftests: ublk: add SET_PARAMS validation test
selftests: ublk: add helper for SET_PARAMS
ublk: reject non-power-of-2 zone sizes in SET_PARAMS
...
|
|
Pull bitmap updates from Yury Norov:
"The usual set of fixes, cleanups and performance improvements together
with a couple of new tests:
- bitmap_find_next_zero_area_off() optimization (Sunyi)
- bitmap_find_next_zero_area_off(): return size when no zero area is
found (Yury)
- bitmap vs IDA vs Maple Tree performance test (Yury)
- get rid of cpumap_print_to_pagebuf() (Yury)
- use nr_node_ids in __nodemask_pr_numnodes() (Li RongQing)
- bitops: make the *_bit_le functions use unsigned long (Benjamin)
- bitmap scatter & gather test fix (Christophe)
- use __ASSEMBLER__ in bitmap header files (Thomas)"
* tag 'bitmap-for-7.3' of https://github.com/norov/linux: (25 commits)
lib: test bitmap vs IDA vs Maple Tree performance for region allocations
bitmap: Return size when no zero area is found
media: s5p-mfc: Treat bitmap size as allocation failure
crypto: ccp: Treat bitmap size as allocation failure
powerpc/msi: Treat bitmap size as allocation failure
ARM: dma-mapping: Treat bitmap size as allocation failure
bitmap: drop bitmap_next_set_region()
nodemask: reduce bitmap width to nr_node_ids in __nodemask_pr_numnodes()
bitmap: Properly initialise destination bitmap for scatter & gather test
lib/bitmap-str: get rid of cpumap_print_to_pagebuf()
perf: Use sysfs_emit() for cpumask show callbacks
PCI/sysfs: Use sysfs_emit() for cpumask show callbacks
RDMA/hfi1: Use sysfs_emit() for cpumask show helper
hwtracing: hisi_ptt: Use sysfs_emit() for cpumask show
fpga: dfl-fme-perf: Use sysfs_emit() for cpumask show
devfreq: Use sysfs_emit() for cpumask show callbacks
cpu: Use sysfs_emit() for cpumask show callback
x86/events: Use sysfs_emit() for cpumask show callbacks
powerpc: Use sysfs_emit() for cpumask show callbacks
arm: Use sysfs_emit() for cpumask show callbacks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Fix kernel-doc warnings by adjusting in file documentation
- Consolidate do_proc_* function into do_proc_vec
Consolidate three slightly different implementations of applying a
converter on all elements of a vector. Fixes to this function now
propagate to the three types.
- Replace CONFIG_PROC_SYSCTL with CONFIG_SYSCTL (they were the same)
and restrict cad_pid modifications to global root (GLOBAL_ROOT_UID)
* tag 'sysctl-7.03-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: remove CONFIG_PROC_SYSCTL, it just mirrors CONFIG_SYSCTL
sysctl: move the "cad_pid" entry from pid_table[] to kern_reboot_table[]
sysctl: repair some kernel-doc comments
sysctl: add Returns: kernel-doc for all functions
sysctl: Update API function documentation
sysctl: Rename proc_doulongvec_minmax_conv to proc_doulongvec_conv
sysctl: Group proc_handler declarations and document
sysctl: Replace do_proc_do{int,ulong,uint}vec with do_proc_vec
sysctl: Add negp parameter to douintvec converter functions
sysctl: Move default converter assignment out of do_proc_dointvec
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.
It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.
Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.
We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.
The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...
Core & protocols:
- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET
- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)
- Support buffers larger than PAGE_SIZE in devmem zero-copy API
- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned
- Report the per-group user count via RTM_GETMULTICAST
- Expose the route deletion reason in RTM_DELROUTE
- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot
- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table
- Support PRP RedBox (interlink) creation
- Support per-nexthop UDP dst port in VXLAN
- Continue converting getsockopt callbacks in a number of protocols
to iov_iter
Ethernet:
- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)
- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers
- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers
- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation
- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S
- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D
Wireless:
- nl80211: per-link statistics support for multi-link operation
- mac80211: AQL/airtime-fairness support for multicast
- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)
- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)
- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support
Bluetooth:
- HCI: add support for Shorter Connection Interval (SCI) feature
- af_bluetooth: add minimal context analysis annotations
- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq
Misc:
- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)
- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)
- Power-over-Ethernet: support Realtek PSE controllers
- Remove the IBM EHEA driver
- Remove tulip/xircom_cb driver"
* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...
|
|
WARN_ON_ONCE() takes a condition, not a message. The string literals are
always true, so the warnings still trigger but the messages are never
printed.
Use WARN_ONCE(1, ...) instead to print the messages and keep the once-only
behavior.
Found with a Coccinelle script. Clang's -Wstring-conversion also flags
such calls but is not enabled in kernel builds.
Link: https://lore.kernel.org/20260808123608.73613-1-kmehltretter@gmail.com
Fixes: 82114e45131f ("lib/interval_tree: add test case for interval_tree_iter_xxx() helpers")
Assisted-by: Claude:claude-fable-5 coccinelle
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Linux 7.2
There was a lot of conflicts this round between fixes and next,
and I'd like to get the merge resolutions that we have in drm-tip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Add af_alg_restrict sysctl and white list
- Fix potential suspend/resume races in hwrng
Algorithms:
- Optimize vli additive operations using compiler builtins in ecc
Drivers:
- Remove unsafe/deprecated algorithms from qce
- Mark qce as BROKEN
- Add runtime PM and interconnect bandwidth scaling support to qce
- Remove crypto_rng from qcom, sun8i and caam
- Fix SG list issues in iaa
- Fix SEV init path bugs in ccp"
* tag 'v7.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (122 commits)
crypto: lskcipher - propagate errors from unaligned crypt
crypto: keembay - use crypto_memneq() to compare CCM AEAD tags
crypto: keembay - use crypto_memneq() to compare GCM AEAD tags
crypto: sa2ul - use crypto_memneq() to compare AEAD tag
hwrng: drivers - use named initializers for acpi_device_id
crypto: qce - fix CCM AAD buffer underallocation
crypto: iaa - unmap dst before software fallback on decompress
crypto: iaa - use bounce buffer for multi-sg decompress input
crypto: iaa - avoid counting fallback decompression bytes
crypto: iaa - fall back to software for multi-entry scatterlists
hwrng: core - Stop/start hwrng_fillfn() kthread before/after suspend-resume
crypto: hisilicon/sec2 - fix CCM algorithm long packet failure
crypto: eip93 - use struct_size() and flexible array for ring allocation
crypto: krb5 - use kfree_sensitive() for derived key buffers
crypto: af_alg - Stop after finding name in allowlist
crypto: af_alg - Replace 'bool privileged' with flags
crypto: af_alg - Make cbc(paes) privileged-only
hwrng: imx-rngc - Disable clock on registration failure
crypto: qat - remove dead ADF_HEX code
crypto: qce - simplify qce_handle_request
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"container_of:
- Apply typeof_member(), remove the local __mptr variable to
eliminate variable shadowing warnings on nested container_of()
calls, and remove unnecessary parentheses
core:
- Add driver name to probe debug print for initcall_debug
- Avoid repeatedly printing the same 'Fixed dependency cycle' log
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device()
- Remove statistics group if encryption group creation fails in
transport_add_class_device()
debugfs:
- Fix lockdown check for mmap_prepare()
- Warn if file creation failed due to uninitialized debugfs
device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from
DEV_PROP_REF properties to enable automatic probe ordering. Add
kunit-managed fwnode helpers and test coverage
- Fix infinite loop in fwnode_for_each_child_node() when the
secondary fwnode has more than one child. Add test cases
- Fix out-of-bounds access in software_node_get_reference_args() when
called with index -1 (UINT_MAX)
- Refactor to use RAII approach with __free()
- Add Bartosz Golaszewski as software node reviewer
firmware loader:
- Fix race where a sysfs fallback request can complete before being
queued as pending, leading to a use-after-free on the next fallback
request
- Reject 0-size built-in firmware and fail the build on empty
firmware files in CONFIG_EXTRA_FIRMWARE
kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros
and allow the constification of kobject attributes, enabling them
to reside in read-only memory
platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(),
and platform_device_set_of_node_from_dev() helpers that encapsulate
firmware node reference counting for dynamically allocated platform
devices
Convert all in-tree users that manually assigned dev.of_node or
dev.fwnode, fixing a pre-existing refcount bug in powermac. Switch
to counting references of all firmware node types, not only OF
nodes
- Unify the release path for dynamically allocated platform devices
by removing platform_device_release_full(). Amend the fwnode setter
API contract to warn if a primary software node is overwritten. Add
KUnit tests for correct software node removal on device
unregistration
Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant
ForLt types
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements
from kernel::transmute traits to zerocopy traits
- Device:
- Add BoundInternal device context and InternalBoundContext trait
for bus abstractions that need internal access to a bound
device.
- Make the lifetime on Core and CoreInternal invariant to prevent
coercion to shorter lifetimes
- Devres:
- Fix race between concurrent revokers where the losing revoker
could return before the winning revoker finished dropping the
inner data, causing use-after-free.
- Ensure revocation is complete before the device finishes
unbinding by making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens
'static back to the caller's borrow scope. Implement ForLt and
CovariantForLt for Bar, IoMem, and ExclusiveIoMem
- Driver:
- Switch from index-based to pointer-based device ID info lookup,
storing static references in driver_data. Centralize device ID
handling in device_id.rs, removing the open-coded ACPI/OF
matching logic and duplicate ID table from driver.rs
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type
for the existing untyped case), create view types representing
subregions of a mapped I/O region, and add io_project!() for
safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io)
with a blanket implementation, preventing implementers from
overriding provided methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile
access, and make Coherent implement Io via an I/O view type.
Add IoSysMap as sum type of Mmio and SysMem. Add copying
methods (memcpy_{from,to}io()) and read_val()/write_val() for
typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!()
for primitives and copying methods for aggregates; drop the old
macros. Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro,
remove unused rule arguments, and use path fragments for alias
destinations
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers
by removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning
type, giving drivers explicit control over the allocation
lifetime. IrqVector embeds a resolved IrqRequest, making the
conversion infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX,
PCI_IRQ_MSI, or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline
- Serdev:
- Add Rust abstractions for the serial device bus, including
serdev::Driver trait, serdev::Device wrapping struct
serdev_device, and serdev::Adapter implementing
RegistrationOps. Includes a sample driver. Markus Probst takes
over as serdev maintainer for both C and Rust code
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an
unsafe CovariantForLt subtrait guaranteeing covariance,
enabling invariant types (e.g. those containing Mutex<&'bound T>)
to participate in the ForLt abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef
misc:
- Avoid iattr allocation in kernfs listxattr by using
kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark
internal property data as private for kernel-doc, and add
property.h/fwnode.h to driver-api infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h"
* tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (129 commits)
rust: pci: expose the allocated interrupt type
PCI: Add pci_irq_type() to query the allocated interrupt type
rust: pci: remove request_irq() and request_threaded_irq() from Device
rust: pci: resolve IRQ in index() and embed IrqRequest in IrqVector
rust: pci: convert IrqVectorRegistration to a lifetime-managed owning type
kernfs: avoid iattr allocation in listxattr
rust: serdev: use ThisModule::as_ptr() instead of field access
ACPI/IORT: use platform_device_set_fwnode()
ACPI/APMT: use platform_device_set_fwnode()
firmware_loader: do not queue completed sysfs fallback requests
rust: pci: Mark Device refcount methods inline
rust: irq: make Registration compatible with lifetime-bound drivers
rust: net/phy: remove expansion from doc
rust: dma: return zero for Coherent reads past EOF
rust: io: register: use path fragment for alias destination
rust: io: register: remove unused rule arguments
rust: io: register: dispatch shortcut rules internally
MAINTAINERS: add sys_soc.h to DRIVER CORE
rust: debugfs: remove unsafe blocks from traits impl for Vec
rust: debugfs: migrate debugfs traits requirements to zerocopy
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull watchdog updates from Guenter Roeck:
"New Drivers:
- Nuvoton MA35D1
- Lenovo SE30G2 and SE60
Added support to existing drivers:
- snps,dw-wdt: Add RV1106 compatible
- apple,wdt: Add t6030, t6031, and t8132 compatibles
Other notable changes:
- New "dump" pretimeout governor
- Propagate errors from optional IRQ lookup
- Remove redundant dev_err() and dev_err_probe() messages
- npcm, qcom: Improved bootstatus reports
- realtek-otto: Change to use regmap API
- w83627hf_wdt: Report running watchdog, identify NCT6126
Various other minor fixes and improvements"
* tag 'watchdog-for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (40 commits)
watchdog: orion_wdt: Propagate errors from optional IRQ lookup
watchdog: qcom: Propagate errors from optional IRQ lookup
watchdog: aspeed: Propagate errors from optional IRQ lookup
watchdog: stm32_iwdg: Propagate errors from optional IRQ lookup
watchdog: dw_wdt: Propagate errors from optional IRQ lookup
watchdog: mediatek: Propagate errors from optional IRQ lookup
watchdog: apple: Constify some structures
watchdog: pretimeout: Convert dump pretimeout governor to tristate
nmi: Export CPU backtrace APIs for loadable modules
watchdog: booke_wdt: Document unused parameter of __booke_wdt_disable()
watchdog: wdat_wdt: map registers that fall inside ACPI NVS
watchdog: Add Nuvoton MA35D1 watchdog driver support
dt-bindings: watchdog: Add MA35D1 Watchdog
watchdog: qcom: report bootstatus on IPQ9574 and IPQ5332
watchdog: qcom: report WDIOF_POWERUNDER in bootstatus
watchdog: sprd: Remove redundant dev_err()
watchdog: sama5d4: Remove redundant dev_err()
watchdog: realtek_otto: Remove redundant dev_err_probe()
watchdog: orion: Remove redundant dev_err()
watchdog: marvell_gti: Remove redundant dev_err_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"GPIO core:
- extend the gpio-regmap abstraction layer with more features
allowing users to override configuration setting, translate
register values and masks and enable/disable interrupts
- extend GPIO kunit tests with suites verifying probe ordering by
software node devlink support and software node hogs
- shrink GPIO kunit initialization code
- coding style updates (remove commas from sentinels where
applicable)
- with all users now converted treewide to using real firmware node
links for software node GPIO lookup: remove the deprecated
label-matching mechanism from from GPIO core
- drop redundant return value check of nonseekable_open() in
gpiolib-cdev
- use IRQ trigger helpers where applicable
Driver updates:
- refactor error paths and logging in gpio-nomadik
- use more modern interfaces for getting resources in gpio-rockchip,
gpio-bt8xx and gpio-pca9570
- add missing MODULE_DEVICE_TABLE() to gpio-sifive and gpio-vf610
- drop unused FILONOFF macro from gpio-rcar
- extend build coverage of ioport GPIO drivers with COMPILE_TEST=y
- only enable the gpio-rtd driver by default with ARCH_REALTEK=y to
avoid bloating the build
- refactor coding style in several drivers
- use correct endianess translation in gpio-pcf85x
- add wake-up interrupt support to gpio-mvebu
- apply initial value in direction output setter in gpio-by-pinctrl
Misc:
- replace linux/gpio.h inclusions treewide with linux/gpio/legacy.h
which now exports all the deprecated APIs
- select GPIOLIB_LEGACY in Kconfig where required treewide
- use software nodes for gpio-keys in MFD drivers
Devicetree bindings:
- describe the realtek rtd1625 GPIO controller
- document new models for gpio-pca95xx and gpio-cadence
- document new property in gpio-rockchip"
* tag 'gpio-updates-for-v7.3-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (61 commits)
gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
dt-bindings: gpio: rockchip,gpio-bank: Add rockchip,grf property
gpio: Use IRQ trigger mask helpers
gpio: allow COMPILE_TEST for IOPORT drivers
gpio: realtek: Add driver for Realtek DHC RTD1625 SoC
gpio: regmap: Add IRQ enable/disable helpers
gpio: regmap: Add set_config callback
gpio: regmap: Add value_xlate callback
gpio: regmap: Add gpio_regmap_operation to extend reg_mask_xlate callback
gpio: regmap: Order kernel-doc descriptions with the actual appearance
gpio: regmap: Apply default resource callbacks for regmap IRQ chip
gpio: regmap: Provide default IRQ resource request and release callbacks
Revert "gpio: realtek: Add driver for Realtek DHC RTD1625 SoC"
gpib: gpio: replace linux/gpio.h inclusion
Input: matrix_keyboard - replace linux/gpio.h inclusion
phy: replace linux/gpio.h inclusions
pcmcia: replace linux/gpio.h inclusions
ASoC: replace linux/gpio.h inclusions
mfd: replace linux/gpio.h inclusions
sh: replace linux/gpio.h inclusions
...
|
|
Export iov_iter_restore so that it can be used by modules.
This is needed by the virtio vsock transport (which can be built as a
module) to restore the msg_iter state when transmission fails.
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Octavian Purdila <tavip@google.com>
Message-ID: <20260622222757.2130402-2-tavip@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO new device support, features, cleanup for 7.3
Includes a merge of 7.2-rc2 to pick up the changes around
mod_devicetable.h and reduce resulting conflicts around includes.
New device support
------------------
adi,ad3530R
- Add support for the AD3532R and AD3532 16 channel DACs.
adi,ad4080
- Add support for the AD4883 ADC.
adi,ad5686
- Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs
over SPI
- Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C
- Significant driver refactoring prior to these additions, partly to reduce
bus traffic and to add triggered buffer and gain control support. An
earlier set added support for missing supplies, reset and LDAC GPIO.
adi,adf41513
- New driver to support this PLL frequency synthesizer that runs up to
26.5 GHz.
- Included infrastructure to handle higher precision attributes with
extensive tests
adi,ltc2378-20
- New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370
LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed
capture via appropriate backend and conventional triggered buffer SPI
capture.
invensense,icm42607
- New driver for this IMU.
mediateck,mt6323
- New driver for this PMIC ADC.
microchip,mcp47a1
- New driver for this I2C 6 bit DAC.
nxp,mcf54415-dac
- New driver for this DAC found in NXP SoCs.
qst,qmc5884l
- New driver for this 3 axis magnetometer. Included dt vendor entry for qst.
qst,qmc6308
- New driver for this 3 axis magnetometer.
sensiron,slf3s
- New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW
channel type.
st,vl53l1x
- Refactors to improve readability.
ti,ads112c14
- New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring
some new ABI for input chopping, particular useful for resistive sensors
like thermocouples or Wheatstone bridges.
- Support CRC8 detection of corruption on the bus.
- Support buffered reads.
ti,tmp117
- (trivial) Add support for the tmp119 temperature sensor.
xilinx,versal-sysmon
- New ADC driver for this block found on various FPGAs including various
bus interfaces, threshold and oversampling support.
dt binding updates
------------------
new shared bindings
- excitation-channels and excitation-current-nanoamp allow per channel
specification of currents used for resistive sensor measurement.
- reference-sources property to allow selection of a per channel reference.
rockchip,saradc
- Add RV1106 which is compatible with the RV3588.
Features
--------
buffer-dmaengine
- Allow cyclic buffers, useful for repeating sequence generation with DACs.
devantech,dmard09
- Implement read back of channel scale - previously interface always
returned an error.
hid,sensors-als
- Enable separate channel scaling for hardware that supports it.
invensense,timestamp library
- Various precision improvements.
invensense,icm42600
- Add support for hwfifo watermark interfaces.
taos,tcs3472
- Support wait time and sampling frequency control.
Cleanups, minor fixes
---------------------
Minor cleanups not mentioned at all in this summary such
as white space fixes or typos.
Affecting various drivers
- Cleanup of conditionals that had no affect.
- Drop some runtime pm local wrappers as now runtime_pm does the
mark_last_busy part inside the put, these provide no useful code
deduplication or readability advantages over directly calling the
runtime_pm functions.
- Return 0 from write_raw() on success.
- Use of dev_err_probe() to simplify code and sometimes provide useful
info for deferred probe debugging.
- Drop some redundant error prints where the called function already
provides information on errors.
- Make some read only arrays in functions static.
- Fix up missing handling of regcache_sync() errors.
- Drop some false kernel-doc markings.
- Add missing MODULE_DEVICE_TABLE for some of_match_id tables.
- Use local variables for things like the struct device to shorten and
improve readability of code.
- Drop some unused structure elements.
- Reorder dds.h macro parameters to be inline with others.
- Header reorders and IWYU. Often part of a more significant series.
- Remove abstractions designed to allow a driver to support multiple device
types, when they have been around a long time and only the original part
showed up.
- Initialize spi_device_id arrays using member names following dropping of
driver data from drivers that didn't actually use it.
- Catch up with i2c_device_id tables added since previous effort to use
named initializers for all those.
- Use kernel types in a few places instead of standard C ones or bare
unsigned.
Misc
- Update Xilinx AMS maintainer.
- Update email address for Maxwell Doose.
- Update email address for Siratul Islam.
- Update email address for Tomasz Duszynski and re-add Tomasz to
various maintainer entries.
Docs
- Encourage use of differential channel naming even when there is no
flexibility in input to differential pair mapping. Intended to
provide a strong signal to userspace that a channel is differential.
adi,ad_sigma_delta
- Allow COMPILE_TEST without any users.
adi,ad2s1201
- Refactor trigger handler to avoid mix of guard() and goto.
adi,ad5686
- Avoid potential NULL dereference is user forces a driver bind.
adi,ad5696
- Add a couple of missing entries to the of_match_id table and update
binding to match.
atmel,ad91_adc
- Use const char * for DT string property allowing a cast to be dropped.
avia,hx711
- Various refactors and cleanup to enable support of additional parts
(to come)
- Add missing supply and gpio dt-bindings.
bosch,bmc150
- Harden against device reporting too large a FIFO sample count.
- Use FIELD_PREP() / FIELD_GET() to improve readability.
freescale,fxls8962af
- Harden against device reporting too large a FIFO sample count.
hid-sensors-*
- Reorder probe to not expose userspace interfaces until the rest of
the setup is done to avoid potentially dropping data.
honeywell,abp2030pa
- Drop an unreachable return.
invensens,icm45600
- Harden against bad value of FIFO sample count from device.
- Use i2c_match_data if firmware table sourced match data isn't available.
nxp,mpl1115
- Ensure runtime_pm is balanced on error in probe.
rohm,bm1390
- Make the driver slightly more likely to recover from transient errors.
sensiron,sgp30
- Handle thread creation errors.
st,lsm6dsx
- Update the enable mask when doing sensor fusion to avoid incorrect fifo
data handling.
st,stm32-dfsdm
- Treat dt flags as booleans.
ti,ads1015
- Switch to devm helpers which simplified code and closed a resource leak.
ti,opt3001
- Split complicated opt3001_get_processed() logic into irq an no irq
helper functions.
- Use devm to simplify code.
- Use guard() to simplify code.
- Reorder probe so final call exposes userspace interfaces.
- Various other more minor cleanup
taos,tsl2772
- Fix calibscale readback to check right channel type.
taos,tsl2583
- Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents.
* tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (232 commits)
iio: dac: mcp47a1: add support for new device
dt-bindings: iio: dac: add support for mcp47a1
iio: Update email for Maxwell Doose
iio: imu: st_lsm6dsx: Update enable mask when using sensor fusion
iio: light: cm32181: return zero after writing calibscale
iio: flow: add Sensirion SLF3S liquid flow sensor driver
iio: core: add IIO_VAL_DECIMAL64_FEMTO format type
dt-bindings: iio: flow: add Sensirion SLF3S liquid flow sensor
iio: types: add IIO_VOLUMEFLOW channel type
iio: ABI: Encourage differential voltage ABI usage
iio: adc: ltc2378: Add support for LTC2338-18
iio: adc: ltc2378: Enable triggered buffer data capture
iio: adc: ltc2378: Enable high-speed data capture
iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs
dt-bindings: iio: adc: Add ltc2378
iio: magnetometer: ak8974: remove conditional return with no effect
iio: light: tsl2583: remove conditional return with no effect
iio: adc: rcar-gyroadc: remove rcar_gyroadc_set_power() helper
iio: light: vcnl4000: remove vcnl4000_set_pm_runtime_state() helper
iio: light: vcnl4035: remove vcnl4035_set_pm_runtime_state() helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Consolidate the VDSO datastore further and provide support for
mlock_all() and prefaulting.
- Provide 32-bit legacy time related functionality only if
CONFIG_COMPAT_32BIT_TIME is enabled. The config switch exists,
but architecture code still exposes the legacy functionality even
disabled.
Clean this up by adding the missing guards and validating at build
time that the VDSO is legacy free if disabled.
- Consolidate the VDSO related config options in core and drivers,
which removes some non-sensical dependencies and quite an amount of
#ifdeffery.
- Clean up the PAGE_SIZE definition maze
* tag 'timers-vdso-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
random: vDSO: Drop custom PAGE_SIZE definitions
LoongArch: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/timer-riscv: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/arm_arch_timer: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/mips-gic-timer: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
MIPS: csrc-r4k: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
vDSO: Make clockmode constants available without CONFIG_GENERIC_GETTIMEOFDAY
kbuild: Support generated asm-headers in subdirectories
vdso: Rename HAVE_GENERIC_VDSO to VDSO_DATASTORE
vdso: Drop HAVE_GENERIC_VDSO from architecture kconfig files
vdso: Automatically select HAVE_GENERIC_VDSO if necessary
MIPS: vdso: Stop using CONFIG_HAVE_GENERIC_VDSO
vdso: Remove the dependency on HAVE_GENERIC_VDSO from ARCH_HAS_VDSO_ARCH_DATA
futex: Remove dependency on HAVE_GENERIC_VDSO from FUTEX_ROBUST_UNLOCK
vdso/gettimeofday: Verify COMPAT_32BIT_TIME interactions
sparc: vdso: Respect COMPAT_32BIT_TIME
MIPS: VDSO: Respect COMPAT_32BIT_TIME
powerpc/vdso: Respect COMPAT_32BIT_TIME
ARM: VDSO: Respect COMPAT_32BIT_TIME
arm64: vdso32: Respect COMPAT_32BIT_TIME
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Futexes:
- Use runtime constants for futex_hash computation (K Prateek Nayak,
Peter Zijlstra)
- Optimise the size check get_futex_key() (Sebastian Andrzej Siewior)
- Avoid private hash use-after-free on final put (Felix Hoffmann)
- Tell kmemleak we're not leaking __futex_queues (Peter Zijlstra)
Rust integration updates:
- Implement refcounted interrupt disable and SpinLockIrq for Rust
(Boqun Feng, Heiko Carstens, Joel Fernandes, Lyude Paul)
- Rust sync: add helpers for mb, dma_mb and friends; add generic
memory barriers and use LKMM atomics instead of Rust atomics in the
revocable code (Gary Guo)
- Add abstraction and integrate synchronize_rcu() (Philipp Stanner)
Lock debugging:
- Add qspinlock contended_release tracepoint (Dmitry Ilvokhin, Peter
Zijlstra)
- Enable the printing of held locks of remote running tasks and print
task CPU (Ingo Molnar)
- percpu-rwsem: Annotate intentional data race in readers_active_check()
(Sun Shaojie)
Misc fixes and updates by Boqun Feng, Peter Zijlstra, Fangrui Song,
Naveen Kumar Chaudhary and Thomas Huth"
* tag 'locking-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
rust: sync: Introduce SpinLockIrq::lock_with() and friends
rust: sync: Add SpinLockIrq
rust: sync: Use super::* in spinlock.rs
rust: helper: Add spin_{un,}lock_irq_{enable,disable}() helpers
rust: Introduce interrupt module
s390/preempt: Enable HAS_SEPARATE_PREEMPT_RESCHED_BITS
arm64: sched/preempt: Enable HAS_SEPARATE_PREEMPT_RESCHED_BITS
preempt: Introduce HAS_SEPARATE_PREEMPT_RESCHED_BITS
sched: Avoid signed comparison of preempt_count() in __cant_migrate()
sched: Remove the unused preempt_offset parameter of __cant_sleep()
locking: Switch to _irq_{disable,enable}() variants in cleanup guards
irq: Add KUnit test for refcounted interrupt enable/disable
irq,spin_lock: Add counted interrupt disabling/enabling
openrisc: Include <linux/cpumask.h> in smp.h
preempt: Introduce __preempt_count_{sub,add}_return()
preempt: Introduce HARDIRQ_DISABLE_BITS
preempt: Track NMI nesting to separate per-CPU counter
futex: Tell kmemleak we're not leaking __futex_queues
x86/paravirt: Trace contended_release on unlock
tracing/lock: Use TRACE_EVENT_FN() for contended_release
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next
Linux 7.2
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
"Fixes and new kunit and tools, enable new configs:
- configs: enable GPIO kunit test cases in all_tests.config
- string-stream: Replace strlcat() with strscpy() and seq_buf
- configs: enable GPIO kunit test cases in all_tests.config
Documentation:
- Test config entries shouldn't select other configs
- Fix outdated FAQ entries
Add the ability to skip entire test suites and an example test suite
that can be skipped at runtime:
- Add ability to skip entire test suites
- Add example of test suite that can be skipped at runtime"
* tag 'linux_kselftest-kunit-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: fix _list_tests filtering wrong variable when list has TAP prefix
kunit: configs: enable GPIO kunit test cases in all_tests.config
kunit: string-stream: Replace strlcat() with strscpy() and seq_buf
Documentation: kunit: Fix outdated FAQ entries
Documentation: kunit: Test Kconfig entries shouldn't select other configs
kunit: Add example of test suite that can be skipped at runtime
kunit,rust: Add ability to skip entire test suites
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library test updates from Eric Biggers:
- Add comprehensive KUnit test suites for the new AES-GCM and AES-CCM
library APIs
- Add FIPS self-tests for all the AES encryption modes. This is needed
for parity with the traditional crypto API
- Fix a couple more issues in the IRQ test helper
* tag 'libcrypto-tests-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: aes-cmac: Use __cleanup() instead of memzero_explicit()
kunit: irq: Unregister on-stack timer and work from debugobjects
kunit: irq: Continue increasing hrtimer interval for longer
lib/crypto: tests: Add KUnit test suite for AES-GCM
lib/crypto: tests: Add KUnit test suite for AES-CCM
lib/crypto: tests: Add aead-test-template.h
lib/crypto: tests: Use per-test-case buffers in hash tests
lib/crypto: tests: Create test-utils.h
lib/crypto: aes: Add FIPS self-tests for GCM and CCM
lib/crypto: aes: Add FIPS self-tests for unauthenticated modes
lib/crypto: fips: Split fips.h into fips-aes.h and fips-sha.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"Add library APIs for most AES encryption modes that are used in the
kernel (ECB, CBC, CBC-CTS, CTR, XCTR, XTS, GCM, CCM).
These AES modes have many in-kernel users that are currently using the
crypto_skcipher or crypto_aead APIs. These existing APIs are difficult
to use and inefficient. Until now, the lack of proper library support
for these has been the main gap in the crypto library.
This set of changes is the next stage of addressing it:
- Implement the new APIs on top of the existing support for
single-block AES in the library.
- Fully document the new APIs.
- Migrate the only user of the old AES-GCM library API to the new,
more flexible API; then remove the old API and its implementation.
- Wire up the new APIs to the traditional crypto API by adding
crypto_skcipher and crypto_aead algorithms.
This makes the new APIs be covered by the traditional crypto API's
self-tests. It also makes them be already used for real on systems
that don't have architecture-optimized code for these modes.
But most importantly, this is a prerequisite for migrating the
architecture-optimized code for these AES modes (i.e.
arch/*/crypto/aes*) into the library, which as usual will eliminate
a lot of redundant "glue" code.
Note that unlike some of the other algorithms that have been migrated
to the library, e.g. SHA-512, for these AES modes there was too much
to get done in one cycle. Nor did it make sense to handle these modes
one at a time, because they tend to be coupled together or depend on
each other, especially in the architecture-optimized AES code.
Thus, most of the benefits (reductions in lines of code, performance
improvements, etc.) will follow in later cycles when
architecture-optimized code is migrated into the library and users of
crypto_skcipher and crypto_aead are updated to use the new APIs.
The design of the new APIs was informed by writing proof-of-concept
patches for many kernel subsystems currently accessing these same
algorithms via crypto_skcipher or crypto_aead (patches 18-33 of
https://lore.kernel.org/r/20260707053503.209874-1-ebiggers@kernel.org/).
While those patches will be resent for real later, the total diffstat
for them was negative 1905 lines. So clearly the new APIs are quite a
bit easier to use and align better with what users actually need.
Besides the new AES encryption APIs, there are also a few changes for
improved AES-CMAC key and context zeroization"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
mac80211: fils_aead: Use __cleanup() instead of memzero_explicit()
Bluetooth: SMP: clear the aes_cmac_key when done
smb: clear the aes_cmac_key and aes_cmac_ctx when done
lib/crypto: aes-cmac: Add zeroization functions
lib/crypto: aesgcm: Remove old AES-GCM library
x86/sev: Remove obsolete virtual address check
x86/sev: Use new AES-GCM library
crypto: aes - Add CCM support using library
crypto: aes - Add GCM support using library
crypto: aes - Add XTS support using library
crypto: aes - Add CTR and XCTR support using library
crypto: aes - Add CBC and CBC-CTS support using library
crypto: aes - Add ECB support using library
lib/crypto: aes: Add CCM support
lib/crypto: aes: Add GCM support
lib/crypto: aes: Add XTS support
lib/crypto: aes: Add CTR and XCTR support
lib/crypto: aes: Add CBC and CBC-CTS support
lib/crypto: aes: Add ECB support
crypto: xts - Split out __xts_verify_key() helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Bigger cleanups:
- The lockref dead-count handling is tidied up.
The open-coded check for a count below zero as the dead marker
relies on information the caller should not have.
- make put_mnt_ns() leave mounts connected. Destroying a mount
namespace disconnected its mounts from their mount points. So a
file descriptor still open on the parent of a mount point could be
used to peek under it.
Locked mounts were already kept connected to prevent exactly that.
But a mount is only locked when its tree is copied across a user
namespace boundary. So a mount namespace set up by a privileged
component had no locked mounts and its mounts were disconnected.
Passing UMOUNT_CONNECTED keeps every mount connected and prevents
that bug.
- vfs_prepare_mode() passes S_IFDIR for directories. I meant to fix
that ago but didn't get to it. So now someone finally did it.
This kills the exception where the mode could be 0 when a directory
was created whereas every other creation operation passed it
explicitly already.
- move long delayed work for ufs, jffs2, hfsplus, hfs and affs from
the per-cpu system_long_wq to the new unbound system_dfl_long_wq.
None of that work relies on per-cpu state and the work item is
enqueued with queue_delayed_work() whose timer is global anyway. So
it may as well benefit from scheduler task placement.
Smaller fixes and cleanups:
- unlock_buffer() and journal_end_buffer_io_sync() use
clear_and_wake_up_bit()
- the pipe page pools are unified into a single per-pipe pool and the
extra wake_up(rd_wait) is limited to EPOLLET consumers
- eventpoll now computes its timer slack lazily in ep_poll()
- shrink_dcache_for_umount() keeps making progress on busy roots
- excess xarray nodes are freed in clear_inode()
- romfs detects hard link cycles
- the user path of nested backing files is fixed
- pidfd holds exec_update_lock around the namespace ioctl
- non-memcg-aware nr_cached_objects is skipped during memcg slab
shrink
- iomap_write_iter() always returns status
- mangle_path() is renamed to seq_mangle_path()
- inode timestamp accessors are annotated
- new regression test for pipe->poll_usage.
- a few documentation, kernel-doc and selftest fixes"
* tag 'vfs-7.3-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (67 commits)
selftests/namespaces: Fix racy pipe handshake in timens and pidns_separate
selftests/epoll: add a regression test for pipe->poll_usage
pipe: only enable the extra wake_up(rd_wait) for EPOLLET consumers
pidfd: hold exec_update_lock around namespace ioctl
fs: fix user path of nested backing files
fs: remove stale inode_insert5() kernel-doc parameter
fs: fix switch/case indentation in sysfs() syscall
fs: document semantics of kstat::{uid,gid} fields
dcache: keep shrink_dcache_for_umount() making progress on busy roots
seq_file: rename mangle_path to seq_mangle_path
nstree: add/fix struct ns_id_req kernel-doc member fields
dcache: use lockref routines for dead count checks
lockref: tidy up dead count handling
initramfs: fix typo in reserve_initrd_mem comment
fs/pipe: unify the page pools into a single per-pipe pool
fs: annotate inode timestamp accessors
eventpoll: compute timer slack lazily in ep_poll()
selftests/filesystems: add mntns cleanup test
put_mnt_ns(): leave mounts connected
affs: Move long delayed work on system_dfl_long_wq
...
|
|
The help text still says the feature only covers mutexes, but blocker
tracking has since been extended to semaphores and rwsems. Update the
description to match the supported lock types.
Link: https://lore.kernel.org/20260730061854.176547-1-wangxb12@chinatelecom.cn
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Xibo Wang <wangxb12@chinatelecom.cn>
Suggested-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Link: https://lore.kernel.org/20260614160521.924710-2-lasse.collin@tukaani.org
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Reduce the number of uint32_t <-> size_t conversions a little.
Eliminating such conversions entirely would require changing almost all
uint32_t to size_t, which would look confusing and increase the sizes of
the structs even more. Going the other way, converting everything to
uint32_t, isn't possible because the input and output buffers use size_t
in struct xz_buf.
Now both arguments to min() have the same type. This is required to for
compatibility with PowerPC boot code[1] whose min() is strict like
include/linux/minmax.h was before the commit d03eba99f5bf ("minmax: allow
min()/max()/clamp() if the arguments have the same signedness.").
Swap the order of the "state" and "len" in struct lzma_dec to avoid
padding in the middle of the struct when size_t is 64 bits. The
reordering doesn't change the size of the struct; the padding just appears
at the end instead.
dict_flush() used to truncate size_t to uint32_t when returning. This
wasn't a bug; the value is always small enough.
Link: https://lore.kernel.org/20260614160521.924710-1-lasse.collin@tukaani.org
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/lkml/20260610232323.GA1071374@ax162/ [1]
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Cc: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the simpler min() macro since the values are unsigned and compatible.
Link: https://lore.kernel.org/20260609150030.634570-1-lasse.collin@tukaani.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Reviewed-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.2-rc8).
No conflicts.
Adjacent changes:
drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
5f3a13e0bb5e ("net: ngbe: fix NULL pointer dereference in non-MSI-X interrupt enabling")
d661abdc30c2 ("net: ngbe: correct misleading interrupt comment")
drivers/net/ipvlan/ipvlan_main.c
e16e960d55a4 ("ipvlan: inherit needed_headroom and needed_tailroom from phy_dev")
00a40d809207 ("ipvlan: Support per-netns netdev unregistration.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By using __cleanup(aes_cmac_zeroize_key) for clearing the key data, we
can save one line of code here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://patch.msgid.link/20260807125845.1477067-6-thuth@redhat.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add a KUnit test suite for the AES-GCM library API.
It consists of:
- All the shared test cases from aead-test-template.h. These include
extensive consistency tests, a "Monte-Carlo test", and a benchmark.
- Tests against hardcoded AES-GCM test vectors from external sources.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802233005.161467-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add a KUnit test suite for the AES-CCM library API.
It consists of:
- All the shared test cases from aead-test-template.h. These include
extensive consistency tests, a "Monte-Carlo test", and a benchmark.
- Tests against hardcoded AES-CCM test vectors from external sources.
- Tests for CCM-specific message length validation.
To generate the expected aes_ccm_monte_carlo_checksum[] value, add a
script gen-aead-testvecs.py which computes it using python-cryptography.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802233005.161467-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add aead-test-template.h which contains shared test logic for AEAD
algorithms. It's similar to the existing hash-test-template.h, which
contains shared test logic for hash algorithms.
The initial use cases for this will be AES-CCM and AES-GCM.
It may be used by the existing ChaCha20Poly1305 test suite in the future
as well, though the ChaCha20Poly1305 API currently lacks some of the
functionality that the "template" expects to be present.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802233005.161467-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Make the test cases more self-contained by replacing the test suite
scoped guarded buffer ('test_buf') with buffers allocated by each test
case using the helper functions in test-utils.h.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802233005.161467-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Move hash-test-template's test RNG code and the buffer allocation code
from various test suites into a header test-utils.h. This allows them
to be shared by other test suites.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802233005.161467-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Upcoming changes will wire up architecture-optimized implementations of
GCM and CCM. FIPS labs can consider such designs to meet the threshold
for separate self-tests to be needed.
Therefore, add FIPS self-tests for encryption and decryption in these
modes.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802222408.91757-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Upcoming changes will wire up architecture-optimized implementations of
ECB, CBC, CBC-CTS, CTR, and XTS. FIPS labs can consider such designs to
meet the threshold for separate self-tests to be needed.
The inverse direction of the block cipher also needs to be exercised,
which the existing CMAC self-test doesn't do.
Therefore, add FIPS self-tests for encryption and decryption in these
modes as well as the "bare" AES.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802222408.91757-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
In preparation for adding FIPS self-tests for AES encryption modes,
split fips.h into separate files for the AES and SHA test vectors.
They are still generated by the same script, but this keeps things a bit
more organized.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802222408.91757-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Currently, CPU backtrace functions cannot be called from loadable
modules because the underlying helper arch_trigger_cpumask_backtrace()
is not exported.
Instead of exporting arch_trigger_cpumask_backtrace() individually
across every supported architecture, introduce and export a common
helper, cpumask_backtrace(), in lib/nmi_backtrace.c. Update the four
inline CPU backtrace macros in include/linux/nmi.h to route through this
centralized helper.
Signed-off-by: Mayank Rungta <mrungta@google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20260730-export-cpu-backtrace-apis-v1-1-bace8e1cb817@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Fix lockdep warning regression in rhashtable
- Fix default authsize in rfc4309
- Fix gcm cryptlen calculation in tegra
- Fix qce registration error-path bug
- Fix incorrect use of sg_dma_len before mapping in starfive
- Allow cbc(paes) to be used with af_alg
* tag 'v7.2-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: af_alg - Allow cbc(paes)
crypto: starfive - use scatterlist length before DMA mapping
crypto: qce - fix error path in devm_qce_register_algs
rhashtable: fix false-positive lockdep splat on rhltable destruction
crypto: tegra - fix rctx->cryptlen calculation in tegra_gcm_do_one_req()
crypto: ccm - Set rfc4309 maxauthsize from child
|
|
These custom definitions where added in commit 7f053812dab3 ("random:
vDSO: minimize and simplify header includes") to avoid pulling in
non-vDSO-safe headers from linux/page.h.
vdso/page.h provides these definitions for the vDSO now. Use that instead.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260724-vdso-random-page-size-v1-1-e69283d36b2f@linutronix.de
|
|
With the changes that enable preempt count to track IRQ disabling
nesting, we don't have enough bits in 32-bit preempt count
implementation, as a result we move NMI nesting bits out of the 32-bit
preempt count. However on the architectures that can support 64-bit
preempt count implementation, we can keep the NMI nesting bits in the
32-bit preempt count and avoid maintaining NMI nesting bits outside of
the same cache line.
Therefore HAS_SEPARATE_PREEMPT_RESCHED_BITS is introduced to allow
architectures to select this. Note that under this Kconfig, preempt
count is maintained in a 64-bit word however preempt_count() still
remains as an int because all the effective bits still fit in
(previously we mask out NEED_RESCHED bit in preempt_count()). This
should make no functional changes for existing preempt_count() users.
Enable this for x86_64 along with the introduction of the Kconfig.
[boqun: Undo the __preempt_count_{add,sub}() optimization in 32-bit
preempt count since it may introduce {over,under}flow]
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-11-boqun@kernel.org
|
|
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
struct bvec_iter::bi_bvec_done is used an offset in the current bvec,
let's rename it accordingly for better clarity. I also plan to use it
for non-bvec based iteration in the future like dma-buf, so drop the
"bvec" part.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/4e4c21858705a200bd8848ffe4080522e3eb5c1c.1786018753.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
kvcalloc with the __GFP_NOFAIL flag will never return NULL, so the
subsequent NULL checks are unreachable dead code. Remove them.
Link: https://lore.kernel.org/20260724022851.466017-6-gouhao@uniontech.com
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Bharat Potnuri <bharat@chelsio.com>
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: jiazhenyuan <jiazhenyuan@uniontech.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nilay Shroff <nilay@linux.ibm.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Thomas Zimemrmann <tzimmermann@suse.de>
Cc: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the
temporary storage used for saving/restoring remote KCOV state is currently
allocated as the per-CPU area.
On PREEMPT_RT kernels, softirq handlers run as preemptible task threads
(e.g., ksoftirqd). If a softirq context preempts a task running a remote
KCOV session, it safely saves the task's state into the per-CPU area.
However, if that softirq thread is subsequently preempted by a higher-
priority softirq thread on the same CPU, the second softirq will overwrite
the same per-CPU area, permanently destroying the original task's KCOV
state.
Fix this data corruption by moving the temporary storage from the per-CPU
area to the per-thread area. Since each softirq thread now owns its own
task context, nested softirq preemption no longer causes data overwrites.
Note that while the temporary storage is now on a per-thread basis, the
per-CPU kcov_percpu_data.lock must be retained, for we need to ensure that
kcov_remote_start() and kcov_remote_stop() operate atomically without
racing against asynchronous interrupts that manipulate the current task's
KCOV state.
It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init()
has already called panic() before returning NULL, for there will be no
OOM-killable userspace processes when __init function of built-in module
runs. But this patch also fixes crashing the kernel when vmalloc_node()
in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULL
but kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in
(1) doing vmalloc() in kcov_remote_start() despite !in_task() context
(2) out-of-array-bounds access if (1) succeeded but
kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE
(3) always leak memory allocated by (1), eventually killing all
OOM-killable userspace processes
problems.
Link: https://lore.kernel.org/43552d09-2ce2-4b19-b0d3-a2d1ab952145@I-love.SAKURA.ne.jp
Reported-by: syzbot+3f51ad7ac3ae57a6fdcc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3f51ad7ac3ae57a6fdcc
Reported-by: syzbot+47cf95ca1f9dcca872c8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=47cf95ca1f9dcca872c8
Reported-by: syzbot+8a173e13208949931dc7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8a173e13208949931dc7
Reported-by: syzbot+90984d3713722683112e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=90984d3713722683112e
Analyzed-by: AI Mode in Google Search (no mail address)
Fixes: 5ff3b30ab57d ("kcov: collect coverage from interrupts")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
checkpatch.pl reports a total of 18 incorrect use of spaces instead of
tabulations in lib/ucs2_string.c.
Apply
./scripts/checkpatch.pl --fix-inplace lib/ucs2_string.c
to fix them all.
Link: https://lore.kernel.org/20260723-fix-ucs2_strnlen-v2-2-9ea94e32a358@kernel.org
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "lib/ucs2_string.c: fix out-of-bounds read in
ucs2_strnlen()", v2.
This series fixes an off-by-one out-of-bounds read in ucs2_strnlen().
The first patch is the real fix, the second patch comes as a bonus and
fixes the code indentation.
This patch (of 2):
ucs2_strnlen() checks the current character before checking whether the
caller-provided maximum length has been reached. If the input is not
NUL-terminated within that bound, the loop can read one ucs2_char_t past
the limit.
Test the length before dereferencing to prevent an off-by-one
out-of-bounds read.
Link: https://lore.kernel.org/20260723-fix-ucs2_strnlen-v2-0-9ea94e32a358@kernel.org
Link: https://lore.kernel.org/20260723-fix-ucs2_strnlen-v2-1-9ea94e32a358@kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
CONFIG_SYSCTL used to make sense as a separate hidden bool before commit
61a47c1ad3a4 ("sysctl: Remove the sysctl system call"); it was selected
by both CONFIG_SYSCTL_SYSCALL and CONFIG_PROC_SYSCTL.
Today CONFIG_PROC_SYSCTL is the only selector, so the two are always
equal. Kill the hidden bool, rename the PROC_SYSCTL prompt to SYSCTL,
and s/CONFIG_PROC_SYSCTL/CONFIG_SYSCTL/ tree-wide.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Add test_hmm coverage for the HMM lock-dropping fault path. The test
module gets a new HMM_DMIRROR_READ_UNLOCKED ioctl that calls
hmm_range_fault_unlocked_timeout() with a timeout of 0, exercising the
unbounded retry mode while allowing the mmap lock to be dropped during
fault handling.
Add a userfaultfd_read selftest that registers an anonymous mapping with
UFFDIO_REGISTER_MODE_MISSING, services the faults from a handler thread
with UFFDIO_COPY, and verifies that HMM can read back the data supplied by
the handler. This exercises the path where handle_mm_fault() drops
mmap_lock and hmm_range_fault_unlocked_timeout() restarts the walk
internally.
Assisted-by: GitHub-Copilot:claude-opus-4.6
Link: https://lore.kernel.org/20260723-hmm-v10-v11-3-c55b003a4b61@gmail.com
Signed-off-by: Stanislav Kinsburskii <skinsburskii@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lizhi Hou <lizhi.hou@amd.com>
Cc: Long Li <longli@microsoft.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Lyude <lyude@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Zimemrmann <tzimmermann@suse.de>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add the required space before the opening parenthesis in switch statements
to conform to kernel coding style.
Link: https://lore.kernel.org/20260623061730.2024-1-git@tazy.dev
Signed-off-by: Watson Wheeler <git@tazy.dev>
Reviewed-by: Liam Howlett <liam@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When slub_kunit is not built-in, call kfree_rcu() and kfree_rcu_nolock()
to test kfree_rcu_nolock() in slub_kunit.
Rename the test case as the test covers more _nolock() APIs.
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Link: https://patch.msgid.link/20260729-kfree_rcu_nolock-v5-8-a28cdcda9673@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
Add a benchmark to test the RAID 6 P/Q functions for more representative
block sizes and numbers of disks. This splits the maximum alloc size used
for the benchmark from the max size for the kunit test because recovery is
currently limited to a single page at a time. Hopefully this will be
fixed soon.
The runtime numbers are reported in GB/s as the numbers of modern
implementations are basically unreadable as MB/s. This means
retro-architectures could report 0, but that is an easy tradeoff.
Link: https://lore.kernel.org/20260715144825.95432-9-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
