| Age | Commit message (Collapse) | Author |
|---|
|
Now that we have a new UPIO_BUS I/O type, use it to register our serial
port. This allows the driver to work properly when using DT where
membase/iobase are not set.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260521-tty-upio-v3-10-bf74567994a0@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that we have a new UPIO_BUS I/O type, use it to register our serial
port and remove obscure membase/iobase workaround.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260521-tty-upio-v3-9-bf74567994a0@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that we have a new UPIO_BUS I/O type, use it to register our serial
port and remove ambiguous membase/iobase workaround.
Note that commit 5da6b1c079e6 ("sc16is7xx: Set iobase to device index")
used the iobase field as an index within the device to allow infering
the order through sysfs, but this is no longer needed since
commit 1ef2c2df1199 ("serial: core: Fix serial core controller port name
to show controller id").
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260521-tty-upio-v3-8-bf74567994a0@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I2C/SPI serial drivers don't use the following struct uart_port variables:
port->membase
port->mapbase
port->iobase
However, they are forced to set membase to a non-zero value so that
uart_configure_port() will succeed because of the following check:
/* If there isn't a port here, don't do anything further. */
if (!port->iobase && !port->mapbase && !port->membase)
return;
Add a new I/O type for SPI and I2C bus devices to remove the need to
implement the kind of above-mentioned ambiguous workarounds to make them
work. Now that UART report functions are using uart_iotype_*() functions,
no more irrelevant I/O information are being printed for UPIO_BUS iotypes.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260521-tty-upio-v3-7-bf74567994a0@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make use of new functions uart_iotype_mmio() and uart_iotype_legacy_io()
to simplify and improve code readability, as well as avoid some variables
init if the iotype is not valid.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260521-tty-upio-v3-6-bf74567994a0@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make use of new functions uart_iotype_mmio() and uart_iotype_legacy_io()
to simplify and improve code readability.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260521-tty-upio-v3-5-bf74567994a0@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Uniformize serial port I/O infos display from three different functions
that display mostly the same information, but with some variations, by
adding a common function.
This make use of new functions uart_iotype_mmio() and
uart_iotype_legacy_io() to simplify and improve code readability.
This will prevent displaying irrelevant information for future IO types
(ex: UPIO_BUS), while also addressing the (eventually) invalid check for
"iotype >= UPIO_MEM".
This also allows us to remove the confusing cast to (unsigned long long)
for iobase which is defined as an unsigned long, and use %pa to display the
mapbase pointer, as it is done in earlycon_print_info().
Replace snprintf with more robust scnprintf so we could perhaps one day get
rid of snprintf() entirely.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260521-tty-upio-v3-4-bf74567994a0@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make use of new functions uart_iotype_mmio() and uart_iotype_legacy_io()
to simplify and improve code readability.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260521-tty-upio-v3-3-bf74567994a0@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To help simplify code that check on the io type mode of the port.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260521-tty-upio-v3-2-bf74567994a0@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the entire hub6 related match port check into its own function in
8250_hub6.c and add a stub for the case when hub6 code is not even built
into kernel.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260521-tty-upio-v3-1-bf74567994a0@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If no_console_suspend is specified, on suspend the 8250 console driver
uses a scratch register (UART_SCR) to store a special canary value. This
is used during the resume path to identify a printk() call before the
driver's own ->resume() callback. In this case,
serial8250_console_restore() is called to quickly re-init the 8250 for
console printing.
See commit 4516d50aabed ("serial: 8250: Use canary to restart console after
suspend") for the original motivation.
Unfortunately, this canary workaround does not work in all cases (such as
suspend to mem) because the scratch register will not reset. This has not
been a real issue until now because it could simply lead to some garbage
characters upon resume. However, with the introduction of console flow
control it becomes a real problem because a failed suspend/resume detection
when flow control is enabled leads to all characters hitting the flow
control timeout.
Workaround this issue by temporarily ignoring console flow control when
the debug canary suspend/resume detection is active.
Fixes: 5e6dfb87b191 ("serial: 8250: Add support for console flow control")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://patch.msgid.link/20260707141032.5074-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In accordance with Errata (specification updates)
HSUART May Stop Functioning when DMA is Active.
- Denverton document #572409, rev 3.4, DNV60
- Ice Lake Xeon D document #714070, ICXD65
- Snowridge document #731931, SNR44
For a quick fix just disable the respective callbacks during the device probe.
Depending on the future development we might remove them completely.
Reported-by: micas-opensource <zjianan156@gmail.com>
Closes: https://lore.kernel.org/linux-serial/20250625031409.2404219-1-opensource@ruijie.com.cn/
Fixes: 6ede6dcd87aa ("serial: 8250_mid: add support for DMA engine handling from UART MMIO")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260626094937.561776-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On AM33xx RX DMA only triggers when the FIFO reaches the
configured threshold (typically 48 bytes). For smaller bursts
no DMA request is issued and the FIFO is drained by RX timeout.
In this case __dma_rx_do_complete() can legitimately see count == 0.
The current code exits early in this case and does not clear
dma->rx_running, leaving the DMA state inconsistent. This can
prevent RX DMA from restarting and may cause
omap_8250_rx_dma_flush() to fail, marking DMA as broken.
Fix this by clearing dma->rx_running once the DMA transfer has
completed or been terminated, even if no data was transferred.
Fixes: a5fd8945a478 ("serial: 8250: 8250_omap.c: Clear DMA RX running status only after DMA termination is done")
Cc: stable <stable@kernel.org>
Signed-off-by: Matthias Feser <mfe@KBSgmbhfr.onmicrosoft.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
Link: https://patch.msgid.link/BE3P281MB55155F2F5795E411F5A65282EE0B2@BE3P281MB5515.DEUP281.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
csi_modifier_param() builds the xterm modifier parameter from
shift_state, counting KG_SHIFTL/KG_SHIFTR as Shift, KG_ALTGR as Alt
and KG_CTRLL/KG_CTRLR as Ctrl in addition to the canonical KG_SHIFT,
KG_ALT and KG_CTRL.
That is wrong when those weights are not plain modifiers. Keymaps
derived from XKB layouts (by kbd's xkbsupport, and by the
console-setup used in Debian, Ubuntu and others) encode the active
layout group using KG_SHIFTL/KG_SHIFTR:
group 1: -
group 2: shiftl
group 3: shiftr
group 4: shiftl | shiftr
So while a non-default layout group is selected, KG_SHIFTL and/or
KG_SHIFTR are set in shift_state with no Shift key held.
csi_modifier_param() then adds a spurious Shift to every cursor and
CSI key: pressing Up while group 2 is active emits ESC[1;2A (Shift+Up)
instead of ESC[A. KG_ALTGR has the same problem since it is the
standard third-level selector.
Normal keymaps bind the physical Shift/Ctrl/Alt keys to KG_SHIFT,
KG_CTRL and KG_ALT, leaving the left/right and AltGr weights free for
layout and level selection. Count only those canonical weights, so
genuine modifiers are still encoded while layout/level selectors are
not.
Fixes: 4af70f151671 ("vt: add modifier support to cursor keys")
Reported-by: Alexey Gladkov <legion@kernel.org>
Closes: https://lore.kernel.org/kbd/aj2gR0Y7sM6i9s2G@example.org/
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://patch.msgid.link/20260626024833.3419086-1-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver currently relies on qcom_geni_serial_pm() through the
uart_ops.pm callback to manage runtime PM references. However, the
callback has a void return type, so failures from
pm_runtime_resume_and_get() cannot be propagated to the caller.
As a result, startup() may continue and access hardware even when the
runtime PM resume operation failed, leading to register accesses while
the device is not powered.
Move runtime PM acquisition to qcom_geni_serial_startup() and release it
to qcom_geni_serial_shutdown(). Since startup() can return an error, PM
resume failures are now detected and propagated before any hardware
initialization is performed. The startup/shutdown pair also provides a
natural place to balance runtime PM references for normal port usage.
During probe, uart_add_one_port() may configure the port before any user
opens the TTY, meaning startup() has not yet been called. To keep the
hardware powered during port registration, wrap uart_add_one_port() with
PM_RUNTIME_ACQUIRE_IF_ENABLED() and PM_RUNTIME_ACQUIRE_ERR(). This
ensures the device is resumed for the duration of registration and that
the runtime PM reference is automatically released afterwards.
By moving runtime PM handling out of uart_ops.pm, resume failures are no
longer silently ignored and all hardware accesses are guaranteed to
occur while the device is powered.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260710-remove_uart_change_state-v1-1-8e8468da22a1@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Unlike modern SoCs that just work in both big-endian and little-endian
mode using the readl()/writel() or readb()/writeb() accessors, the
internal registers on ixp4xx behave like native-endian 32-bit registers
in both modes, which requires adjusting the register address
when using 8-bit access.
The existing dts files are written for big-endian kernels and 8-bit
access, which does not work with little-endian kernels.
Add a quirk that makes the 8250 OF driver:
1. Mask off any hardcoded offset.
2. Add the += 3 offset if and only if we are running on big endian.
This should work in all combinations of big-endian and little-endian
kernels with either variant of the DTS file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[linusw@kernel.org: Modified to just play with the offset]
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260709-ixp4xx-serial-hackfix-v2-1-465fc8e4c54c@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The qcom GENI serial DMA TX completion path advances the transmit fifo by
the number of bytes recorded in port->tx_remaining.
If uart_flush_buffer() runs after the hardware has completed a DMA
transfer but before the DMA completion interrupt has been handled, the
serial core resets the transmit fifo while port->tx_remaining still
describes the old DMA transfer.
A previous fix avoided advancing an empty fifo by checking that the fifo
length is at least tx_remaining. That still does not distinguish the old
DMA payload from new bytes written after the flush. If userspace writes
new data before the stale DMA completion interrupt is handled, the fifo
can again contain at least tx_remaining bytes and the stale completion
can advance and discard those new bytes.
Mark an in-flight DMA transfer stale when the transmit fifo is flushed.
The later completion still unprepares the original DMA mapping using the
saved length, but it no longer advances the transmit fifo.
Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260708131726.768692-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During system power-off, systemd closes the console UART and blocks in
tty_wait_until_sent() waiting for pending TX completion before
uart_shutdown() can cancel pending TX operations. With the default
closing_wait of 30s, this causes a watchdog reset when systemd is
responsible for watchdog feeding.
Set closing_wait to ASYNC_CLOSING_WAIT_NONE in startup() for console
ports to bypass tty_wait_until_sent() on close, allowing uart_shutdown()
to cancel TX commands cleanly. This change doesn't impact regular ports
functionality.
Signed-off-by: Aniket Randive <aniket.randive@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706093749.836121-1-aniket.randive@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During system sleep the hardware resources (clocks, interconnect) are
not gated because the runtime-suspend callback is never invoked from
the system sleep path. This prevents the platform from reaching its
lowest idle state.
The system sleep callbacks qcom_geni_serial_suspend() and
qcom_geni_serial_resume() rely solely on uart_suspend_port() /
uart_resume_port() to manage power. uart_suspend_port() drives the
UART PM state machine to UART_PM_STATE_OFF, which in turn calls
pm_runtime_put_sync() and eventually the runtime-suspend callback.
However, if the runtime-PM usage count is still elevated at the time
of system sleep (e.g. the port is held active by an open file
descriptor), the runtime-suspend callback is never invoked and the
hardware resources (clocks, interconnect) remain enabled across
suspend, preventing the platform from reaching its lowest idle state.
Fix this by calling pm_runtime_force_suspend() at the end of
qcom_geni_serial_suspend() so that the runtime-suspend callback is
always executed regardless of the usage count, and by calling
pm_runtime_force_resume() at the start of qcom_geni_serial_resume()
to restore those resources before uart_resume_port() re-opens the
port.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260702-add_force_suspend_resume_to_system_sleep_callbacks-v2-1-b79e254a7015@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
geni_se_rx_dma_prep() calls dma_map_single() which can trigger IOMMU
page table allocations under GFP_KERNEL. This is unsafe when called
from qcom_geni_serial_start_rx_dma(), which runs in atomic context
producing a "sleeping function called from invalid context" splat:
__might_resched+0x15c/0x17c
__alloc_pages_noprof+0xe4/0x4c8
qcom_io_pgtable_alloc_page+0x100/0x250
__arm_lpae_map+0x2d0/0x870
geni_se_rx_dma_prep+0xd8/0x158
qcom_geni_serial_start_rx_dma+0x84/0x16c
qcom_geni_serial_startup+0x70/0x104
Fix this by mapping the RX DMA buffer once during probe, where sleeping
is allowed, and keeping it mapped for the lifetime of the device.
Replace the geni_se_rx_dma_prep() / geni_se_rx_dma_unprep() calls in
the runtime paths with dma_sync_single_for_device() before initiating a
transfer and dma_sync_single_for_cpu() on completion, using the persistent
mapping. The buffer is unmapped in probe's error path and in remove().
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260701-fix-sleep-in-atomic-context-during-rx-dma-setup-v1-1-95c208380c65@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ma35d1serial_console_init_port() stores matching UART device nodes in
ma35d1serial_uart_nodes[] with an extra of_node_get() so that console
setup can later read the "reg" property. However, the stored references
are never released after console setup has finished using them.
Drop the stored node reference after ma35d1serial_console_setup() reads
the "reg" property, and clear the array slot to avoid leaving a stale
pointer behind. Also release the iterator reference before breaking out
of for_each_matching_node(), since the normal iterator advance will not
run in that path.
Fixes: 930cbf92db01 ("tty: serial: Add Nuvoton ma35d1 serial driver support")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Link: https://patch.msgid.link/20260630214043.1887351-1-dbgh9129@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
pnp_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled array, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Also simplify the list terminator and use a consistent and more common
indention.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260629170409.3412413-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We do unneeded "double free" (emptying an empty list) in one case.
This is not a critical issue at all, the fix just makes code robust
against any possible future changes in the flow.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260617092515.2649521-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replacing strcpy() with strscpy() ensures that overflow of the target
buffer cannot happen.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20260608095523.2606-10-david.laight.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add check for pci_get_slot() to prevent a potetial
null pointer dereference in pch_request_dma().
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260623140539.2272473-1-haoxiang_li2024@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On x86_64 defconfig, booting with driver_async_probe=serial hangs in early
init. The 8250 PNP driver is put onto the async probe pool.
serial8250_register_8250_port() runs in a kworker concurrently with the
ISA registration done from the serial8250_init() initcall resulting in a
deadlock or NULL dereference.
- Deadlock: serial_core_register_port() holds port_mutex across
serial_core_add_one_port()
uart_configure_port()
autoconfig_irq()
probe_irq_on()
async_synchronize_full(),
which waits for the async probe pool to drain.
The async PNP worker reaches the "port already in use" check and
tries to unregister it.
serial8250_register_8250_port()
uart_remove_one_port()
serial_core_unregister_port()
This blocks on port_mutex.
The init thread waits for the worker and the worker waits for the
init thread.
- NULL deref: when the worker instead observes a slot whose port.dev
is set but whose port_dev has not yet been populated, it hits the
null pointer on the call to serial_core_get_ctrl_dev() in
serial_core_unregister_port().
Signed-off-by: Rahul Bukte <rahul.bukte@sony.com>
Link: https://patch.msgid.link/20260610054130.2825182-1-rahul.bukte@sony.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
platform_get_irq is a newer API for this that does not require
irq_dispose_mapping().
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260607021117.6325-1-rosenp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When two PnP devices map to the same physical port, the serial8250 driver
removes and re-registers the console structure for the same port.
During re-registration, the console structure still has CON_PRINTBUFFER set
from the initial registration, which causes console_init_seq() to set
console->seq to syslog_seq. This results in re-printing the entire
system log buffer, which may lead to RCU stall on slow serial consoles.
Clear CON_PRINTBUFFER when re-registering a port to prevent duplicate
log printing.
Fixes: 835d844d1a28 ("8250_pnp: do pnp probe before legacy probe")
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Link: https://patch.msgid.link/20260522101042.21976-1-fushuai.wang@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
psc_num is derived from port->mapbase bits 11:8, giving a range of
0-15, but the psc_mclk_clk and psc_ipg_clk arrays are sized to
MPC52xx_PSC_MAXNUM (12 when CONFIG_PPC_MPC512x is set). A malformed
device tree with bits 11:8 >= 12 would cause out-of-bounds writes
in mpc512x_psc_alloc_clock() and out-of-bounds reads/writes in
mpc512x_psc_relse_clock() and mpc512x_psc_endis_clock(). The same
unchecked index also appears in mpc512x_psc_handle_irq().
Add ARRAY_SIZE() bounds checks to all four functions before using
psc_num as an array index.
Assisted-by: Opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260530061025.11625-1-rosenp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
At the moment, concurrent writes from userspace and the kernel to the
console can trigger a race condition that results in an infinite loop of
the same messages printed over and over again. This is most likely to
happen during system startup or shutdown when the init system starts/stops
a large number of system services that interact with various kernel code.
When userspace writes to the TTY device, the driver initiates an
asynchronous DMA transfer and releases the port lock. At the same moment,
the kernel printk path might grab the port lock and re-configure the UART
controller for PIO, without waiting for the DMA operation to complete. It
seems like this collision results in zero progress being reported for the
DMA engine, so the same text is printed to the console over and over again.
For the kernel console, we want a reliable output path that will be
functional even during crashes etc. So rather than implementing complex
code to synchronize the kernel console write routines with the userspace
DMA write routines, simply disable DMA for the console UART instance.
Similar checks exist in many other serial drivers, e.g. 8250_port.c,
imx.c, sh-sci.c etc.
Cc: stable <stable@kernel.org>
Fixes: 3a878c430fd6 ("tty: serial: msm: Add TX DMA support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-serial-msm-console-dma-collision-v1-1-3179b8cb1d89@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It's strongly recommended for GPIO drivers to always implement the
.get_direction() callback - even when the direction is tracked in
software. The GPIO core emits a warning when the callback is missing
and a user reads the direction of a line, e.g. via
/sys/kernel/debug/gpio.
The MAX310X keeps the GPIO direction in the GPIOCFG register (a set bit
selects output), which the existing direction_input/output callbacks
already program, so the current direction can be read back directly.
Fixes: f65444187a66 ("serial: New serial driver MAX310X")
Cc: stable <stable@kernel.org>
Signed-off-by: Tapio Reijonen <tapio.reijonen@vaisala.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260615-b4-serial-max310x-gpio-get-direction-v2-1-4704ba2b181a@vaisala.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
guard()s express more clearly what the lock protects and let the
function return immediately instead of jumping to an unlock label.
Signed-off-by: John de la Garza <john@jjdev.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260701231215.4092457-1-john@jjdev.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the manual spin_lock_irq()/rcu_read_lock() nesting in tiocspgrp()
to scoped guard()s. This drops the out_unlock and out_unlock_ctrl labels
and lets the error paths return directly.
No functional change intended.
Signed-off-by: John de la Garza <john@jjdev.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260701030139.3189030-1-john@jjdev.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The MAX310x DT binding pulls in /schemas/serial/rs485.yaml via its allOf
list, advertising the rs485-* properties defined there - none of which
were honoured at runtime, because the driver never called
uart_get_rs485_mode().
All channels share the parent SPI/I2C device, so uart_get_rs485_mode()
called directly on each port would read the same chip-level fwnode for
every call. Walk dev->of_node's children for the "serial@N" subnode
with matching reg, and temporarily retarget the parent device's fwnode
while uart_get_rs485_mode() runs, so each channel picks up its own
subnode's properties. Probe is serialised, so the swap is safe.
For single-channel variants (max3107, max3108), fall back to the chip's
own fwnode when no subnode is present, so existing DTs that declare
rs485 properties at the top level keep working.
Signed-off-by: Tapio Reijonen <tapio.reijonen@vaisala.com>
Link: https://patch.msgid.link/20260615-b4-max310x-rs485-dt-v3-3-7e79f064bdd7@vaisala.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The MAX310x exposes four GPIOs per UART port via an in-driver
gpio_chip. devm_gpiochip_add_data() used to run after the per-port
uart_add_one_port() loop, so a device-tree consumer referencing one of
the chip's own GPIOs (for example rs485-term-gpios = <&max310x 0 ...>)
could not resolve it during port registration: the GPIO provider it
waits for is the very driver still trying to register, and the lookup
returns -EPROBE_DEFER on its own provider, deferring probe forever.
Split the per-port setup into two passes around the gpio_chip
registration:
1. Initialise per-port state - port struct fields, regmap binding,
IRQ disable, work queues. The gpio_chip callbacks dereference
s->p[i].regmap via to_max310x_port() and become callable as soon
as the chip is visible to gpiolib, so every entry must be
populated first.
2. devm_gpiochip_add_data() - register the gpio_chip.
3. Allocate a line, uart_add_one_port(), set_bit(), max310x_power().
Keeping line allocation, registration and set_bit() together
preserves the existing "bit set <=> port registered" rollback
invariant that out_uart relies on.
Signed-off-by: Tapio Reijonen <tapio.reijonen@vaisala.com>
Link: https://patch.msgid.link/20260615-b4-max310x-rs485-dt-v3-1-7e79f064bdd7@vaisala.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
vcs_read() and vcs_write() allocate staging buffers with
__get_free_pages().
These buffers can be allocated with kmalloc() as there's nothing special
about them to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and it's a
modern way of saying "I need a page-sized buffer"
Replace use of __get_free_page() with kmalloc() and drop unused now
DEFINE_FREE(free_page_ptr ...)
Link: https://lore.kernel.org/all/700c5a5f-3128-4671-99aa-827ca73f5cdf@kernel.org
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260528-b4-tty-v1-4-9da9f7aec5f2@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
men_z135_probe() allocates a receive staging buffer filled by the
CPU via memcpy_fromio() from the device MMIO region.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Replace use of __get_free_page() with kmalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260528-b4-tty-v1-3-9da9f7aec5f2@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rs_startup() allocates a transmit ring buffer that is used to buffer reads
and writes from/to serial data register.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Replace use of get_zeroed_page() with kzalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260528-b4-tty-v1-2-9da9f7aec5f2@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pch_uart_init_port() allocates a staging buffer for non-DMA receive path
using __get_free_page().
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Replace use of __get_free_page() with kmalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260528-b4-tty-v1-1-9da9f7aec5f2@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .driver_data member of the struct pci_device_id array were
initialized by list expressions relying on hidden assignment of .class
and .class_mask in PCI_VDEVICE().
Make the initialization more robust by using a named initializer. This
robustness is relevant for a planned change to struct pci_device_id that
replaces .driver_data by an anonymous union.
This change doesn't introduce changes to the compiled pci_device_id
array. Tested on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260524131905.871222-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .driver_data member of the struct pci_device_id array were
initialized by list expressions. This isn't easily readable if you're
not into PCI, still more given that it's hidden in macros. Using named
initializers is more explicit and thus easier to parse for a human. And
it's also more robust against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
pci_device_id that replaces .driver_data by an anonymous union.
Also drop a few explicit zeros that are not needed and improve
indention.
This change doesn't introduce changes to the compiled pci_device_id
array. Tested on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260522140103.769262-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Using guard()s is cleaner and safer.
goldfish_tty_probe() is omitted due to the crossing err_unmap
goto-label. Using scoped_guard() does not look that nice there. Perhaps
if someone refactored the locked part into a separate function...
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260703084717.176442-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tty/goldfish.c is the only user of gf_write_ptr(). Move it there, drop
the unneeded casts, and name it appropriately.
FTR, the last non-tty user was removed in 2018 by 4ae0fe70a097 ("Delete
the goldfish_nand driver.").
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260703084717.176442-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The field was never used.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260703084717.176442-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 7.2-rc1.
Overall we end up removing more code than added, due to an obsolete
synclink_gt driver being removed from the tree, always a nice thing to
see happen.
Other than that driver removal, major things included in here are:
- max310x serial driver updates and fixes
- 8250 driver updates and rework in places to make it more "modern"
- dts file updates
- serial driver core tweaks and updates
- vt code cleanups
- vc_screen crash fixes
- other minor driver updates and cleanups
All of these have been in linux-next for well over a week with no
reported issues"
* tag 'tty-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
serial: 8250_pci: Don't specify conflicting values to pci_device_id members
vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write
serial: qcom_geni: Fix RX DMA stall when SE_DMA_RX_LEN_IN is zero
vt: merge ucs_is_zero_width()/ucs_is_double_width() into ucs_get_width()
serial: 8250: fix possible ISR soft lockup
dt-bindings: serial: rs485: remove deprecated .txt binding stub
serial: qcom-geni: trace: Add tracepoint support for Qualcomm GENI serial
tty: serial: Use named initializers for arrays of i2c_device_data
serial: 8250_dw: remove clock-notifier infrastructure
serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails
amba/serial: amba-pl011: Bring back zx29 UART support
serial: 8250: Add support for console flow control
serial: 8250: Check LSR timeout on console flow control
serial: 8250: Set cons_flow on port registration
tty: serial: 8250: protect against NULL uart->port.dev in register
arm64: dts: add support for A9 based Amlogic BY401
dt-bindings: arm: amlogic: add A311Y3 support
serial: max310x: fix compile errors if CONFIG_SPI_MASTER is disabled
serial: qcom-geni: Avoid probing debug console UART without console support
serial: max310x: add comments for PLL limits
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Beside the removal of the Hercules monochrome ISA graphics driver and
the corresponding text console driver, there is just the typical
maintanance with smaller driver fixes and cleanups:
Removal of drivers:
- Hercules monochrome ISA graphics adapter driver (Ethan Nelson-Moore)
- Hercules mdacon console driver (Ethan Nelson-Moore)
Changes affecting many drivers at once:
- possible memory leak fixes in various drivers (Abdun Nihaal)
- many conversions to use strscpy() (David Laight)
- Use named initializers in drivers (Uwe Kleine-König)
Code fixes:
- fbcon: don't suspend/resume when vc is graphics mode (Lu Yao)
- modedb: fix a possible UAF in fb_find_mode() (Tuo Li)
- modedb: Fix entry for 1920x1080-60 mode (Steffen Persvold)
- arm: Export acorndata_8x8 font symbol for bootloader (Helge Deller)
- omap2: fix use-after-free in omapfb_mmap (Hongling Zeng)
Cleanups:
- pxa168fb: use devm_ioremap_resource() (Alberto Arostegui)
- provice helpers for fb_set_var() and fb_blank() and fbcon updates
(Thomas Zimmermann)
- fbcon: Use correct type for vc_resize() return value (Jiacheng Yu)
- chipsfb: add missing MODULE_DESCRIPTION() macro (Rahman Mahmutović)
- sunxvr2500: replace printk with device-aware logging functions
(Rahman Mahmutović)
- sm712: Fix operator precedence in big_swap macro (Li RongQing)
- imxfb: Use of_device_get_match_data() (Rosen Penev)
- atmel_lcdfb: Use of_device_get_match_data() (Rosen Penev)
Documentation fixes:
- grvga: Fix CLUT register address offset in comment (Eduardo Silva)
- omap/dss: Fix stale modedb.c path (Costa Shulyupin)
- correct CONFIG_FB_TILEBLITTING macro name in #endif comment (Ethan
Nelson-Moore)"
* tag 'fbdev-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (43 commits)
fbdev: modedb: Fix misaligned fields in the 1920x1080-60 mode
fbdev: modedb: fix a possible UAF in fb_find_mode()
fbdev: s3fb: Use strscpy() to copy strings into arrays
fbdev: sm501fb: Fix buffer errors in OF binding code
fbcon: correct CONFIG_FB_TILEBLITTING macro name in #endif comment
fbdev/arm: Export acorndata_8x8 font symbol for bootloader
fbdev: mmpfb: Use strscpy() to copy device name
fbdev: sisfb: Replace strlen() strcpy() pair with strscpy()
fbdev: rivafb: Use strscpy() to copy device name
fbdev: cyber2000fb: Use strscpy() to copy device name
fbdev: atmel_lcdfb: Use strscpy() to copy device name
fbdev: Do not export fbcon from fbdev
fbdev: Wrap fbcon updates from vga-switcheroo in helper
fbdev: Wrap user-invoked calls to fb_blank() in helper
fbdev: Wrap user-invoked calls to fb_set_var() in helper
fbdev: omap2: fix use-after-free in omapfb_mmap
docs: omap/dss: Fix stale modedb.c path
fbdev: pxa168fb: use devm_ioremap_resource() for MMIO
fbdev: grvga: Fix CLUT register address offset in comment
fbdev: sunxvr2500: replace printk with device-aware logging functions
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Use CIO device online variable instead of the internal FSM state to
determine device availability during purge operations
- Remove extra check of task_stack_page() because try_get_task_stack()
already takes care of that when reading /proc/<pid>/wchan
- Allow user-space to use the new SCLP action qualifier 4 for to
provide NVMe SMART log data to the platform.
- Send AP CHANGE uevents on successful bind and successful association
to notify user-space about SE operations on AP queue devices
- Add an s390dbf kernel parameter to configure debug log levels and
area sizes during early boot
- On arm64 the empty zero page is going to be mapped read-only. Do the
same for s390 with an explicit set_memory_ro() call
- Improve s390-specific bcr_serialize() and cpu_relax() implementations
- Remove all unused variables to avoid allmodconfig W=1 build fails
with latest clang-23
- Cleanup default Kconfig values for s390 selftests
- Add a s390-tod trace clock to allow comparing trace timestamps
between different systems or virtual machines on s390
- Remove the s390 implementation of strlcat() in favor of the generic
variant
- Make consistent the calling order between
page_table_check_pte_clear() and secure page conversion across all
code paths
- Rearrange some fields within AP and zcrypt structs to reduce memory
consumption and unused holes
- Shorten GR_NUM and VX_NUM macros and move them to a separate header
- Replace __get_free_page() with kmalloc() in few sources
- Introduce an infrastructure for more efficient this_cpu operations.
Eliminate conditional branches when PREEMPT_NONE is removed
- Enable Rust support
- Use z10 as minimum architecture level, similar to the boot code, to
enforce a defined architecture level set
- Improve and convert various mem*() helper functions to C. For that
add .noinstr.text section to avoid orphaned warnings from the linker
- Fix the function pointer type in __ret_from_fork() to correct the
indirect call to match kernel thread return type of int
- Revert support for DCACHE_WORD_ACCESS to avoid an endless exception
loop on read from donated Ultravisor pages at unaligned addresses
* tag 's390-7.2-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/s390/linux: (52 commits)
s390: Revert support for DCACHE_WORD_ACCESS
s390/process: Fix kernel thread function pointer type
s390/tishift: Convert __ashlti3(), __ashrti3(), __lshrti3() to C
s390/memmove: Optimize backward copy case
s390/string: Convert memset(16|32|64)() to C
s390/string: Convert memcpy() to C
s390/string: Convert memset() to C
s390/string: Convert memmove() to C
s390/string: Add -ffreestanding compile option to string.o
s390: Add .noinstr.text to boot and purgatory linker scripts
s390/purgatory: Enforce z10 minimum architecture level
s390: Enable Rust support
s390/cmpxchg: Fix KASAN stack-out-of-bounds in atomic helpers
rust: helpers: Add memchr wrapper for string operations
rust/bindgen_parameters: Mark s390 types as opaque to prevent repr conflicts
s390/jump_label: Implement ARCH_STATIC_BRANCH_JUMP_ASM and ARCH_STATIC_BRANCH_ASM macros
s390/bug: Provide ARCH_WARN_ASM for Rust WARN/BUG support
s390/ap: Fix locking issue in SE bind and associate sysfs functions
s390/percpu: Provide arch_this_cpu_write() implementation
s390/percpu: Provide arch_this_cpu_read() implementation
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Deferred probe:
- Fix race where deferred probe timeout work could be permanently
canceled by using mod_delayed_work()
- Fix missing jiffies conversion in deferred_probe_extend_timeout()
- Guard timeout extension with delayed_work_pending() to prevent
premature firing
- Use system_percpu_wq instead of the deprecated system_wq
- Update deferred_probe_timeout documentation
device:
- Replace direct struct device bitfield access (can_match, dma_iommu,
dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
of_node_reused, offline, offline_disabled) with flag-based
accessors using bit operations
- Reject devices with unregistered buses
- Delete unused DEVICE_ATTR_PREALLOC()
- Add low-level device attribute macros with const show/store
callbacks, allowing device attributes to reside in read-only memory
- Move core device attributes to read-only memory
- Constify group array pointers in driver_add_groups() /
driver_remove_groups(), struct bus_type, and struct device_driver
device property:
- Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
- Initialize all fields of fwnode_handle in fwnode_init()
- Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
- Allow passing struct software_node_ref_args pointers directly to
PROPERTY_ENTRY_REF()
driver_override:
- Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
infrastructure, fixing a UAF from unsynchronized access to
driver_override in bus match() callbacks
- Remove the now-unused driver_set_override()
firmware loader:
- Fix recursive lock deadlock in device_cache_fw_images() when async
work falls back to synchronous execution
- Fix device reference leak in firmware_upload_register()
platform:
- Pass KBUILD_MODNAME through the platform driver registration macro
to create module symlinks in sysfs for built-in drivers; move
module_kset initialization to a pure_initcall and tegra cbb
registration to core_initcall to ensure correct ordering
- Pass THIS_MODULE implicitly through a coresight_init_driver() macro
sysfs:
- Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
WARN
- Add return value clamping to sysfs_kf_read()
Rust:
- ACPI:
Fix missing match data for PRP0001 by exporting
acpi_of_match_device()
- Auxiliary:
Replace drvdata() with dedicated registration data on
auxiliary_device. drvdata() exposed the driver's bus device private
data beyond the driver's own scope, creating ordering constraints
and forcing the data to outlive all registrations that access it.
Registration data is instead scoped structurally to the
Registration object, making lifecycle ordering enforced by
construction rather than convention.
- Rust-native device driver lifetimes (HRT):
Allow Rust device drivers to carry a lifetime parameter on their
bus device private data, tied to the device binding scope -- the
interval during which a bus device is bound to a driver. Device
resources like pci::Bar<'a> and IoMem<'a> can be stored directly in
the driver's bus device private data with a lifetime bounded by the
binding scope, so the compiler enforces at build time that they do
not outlive the binding. This removes Devres indirection from every
access site and eliminates try_access() failure paths in
destructors.
Bus driver traits use a Generic Associated Type (GAT) Data<'bound>
to introduce the lifetime on the private data, rather than
parameterizing the Driver trait itself. Auxiliary registration
data, where the lifetime is not introduced by a trait callback but
must be threaded through Registration, uses the ForLt trait (a
type-level abstraction for types generic over a lifetime).
Misc:
- Fix DT overlayed devices not probing by reverting the broken
treewide overlay fix and re-running fw_devlink consumer pickup when
an overlay is applied to a bound device
- Use root_device_register() for faux bus root device; add sanity
check for failed bus init
- Fix dev_has_sync_state() data race with READ_ONCE() and move it to
base.h
- Avoid spurious device_links warning when removing a device while
its supplier is unbinding
- Switch ISA bus to dynamic root device
- Fix suspicious RCU usage in kernfs_put()
- Remove devcoredump exit callback
- Constify devfreq_event_class"
* tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core: (81 commits)
software node: allow passing reference args to PROPERTY_ENTRY_REF()
driver core: platform: set mod_name in driver registration
coresight: pass THIS_MODULE implicitly through a macro
kernel: param: initialize module_kset in a pure_initcall
soc/tegra: cbb: Move driver registration from pure_initcall to core_initcall
firmware_loader: Fix recursive lock in device_cache_fw_images()
driver core: Use system_percpu_wq instead of system_wq
driver core: remove driver_set_override()
rpmsg: use generic driver_override infrastructure
Drivers: hv: vmbus: use generic driver_override infrastructure
cdx: use generic driver_override infrastructure
amba: use generic driver_override infrastructure
rust: devres: add 'static bound to Devres<T>
samples: rust: rust_driver_auxiliary: showcase lifetime-bound registration data
rust: auxiliary: generalize Registration over ForLt
rust: types: add `ForLt` trait for higher-ranked lifetime support
gpu: nova-core: separate driver type from driver data
samples: rust: rust_driver_pci: use HRT lifetime for Bar
rust: io: make IoMem and ExclusiveIoMem lifetime-parameterized
rust: pci: make Bar lifetime-parameterized
...
|
|
The PCI_VDEVICE macro assigns 0 to .class and .class_mask to allow the
next value in the initializer to define the value for .driver_data.
So the construct
{
PCI_VDEVICE(INTASHIELD, 0x0D21),
.class = PCI_CLASS_COMMUNICATION_MULTISERIAL << 8,
.class_mask = 0xffff00,
.driver_data = pbn_b2_4_115200,
},
introduced in commit 44e55f1f3088 ("serial: 8250_pci: Consistently
define pci_device_ids using named initializers") has conflicting
assignments. In only some configurations (i.e. W=1 for me) that makes
the compiler unhappy.
So convert the two affected items to PCI_DEVICE which doesn't have that
hidden assigment to .class and .class_mask.
Fixes: 44e55f1f3088 ("serial: 8250_pci: Consistently define pci_device_ids using named initializers")
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/linux-serial/ah_5qVKOf8LXG1Xo@ashevche-desk.local/T/#ma6eab90ca801b4292639f5c255a89b4033b33d21
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260603095616.937968-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
