| Age | Commit message (Collapse) | Author |
|---|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.19:
UAPI Changes:
- panfrost: Add PANFROST_BO_SYNC ioctl
- panthor: Add PANTHOR_BO_SYNC ioctl
Core Changes:
- atomic: Add drm_device pointer to drm_private_obj
- bridge: Introduce drm_bridge_unplug, drm_bridge_enter, and
drm_bridge_exit
- dma-buf: Improve sg_table debugging
- dma-fence: Add new helpers, and use them when needed
- dp_mst: Avoid out-of-bounds access with VCPI==0
- gem: Reduce page table overhead with transparent huge pages
- panic: Report invalid panic modes
- sched: Add TODO entries
- ttm: Various cleanups
- vblank: Various refactoring and cleanups
- Kconfig cleanups
- Removed support for kdb
Driver Changes:
- amdxdna: Fix race conditions at suspend, Improve handling of zero
tail pointers, Fix cu_idx being overwritten during command setup
- ast: Support imported cursor buffers
-
- panthor: Enable timestamp propagation, Multiple improvements and
fixes to improve the overall robustness, notably of the scheduler.
- panels:
- panel-edp: Support for CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fix mm conflict]
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20251212-spectacular-agama-of-abracadabra-aaef32@penduick
|
|
Let's kickstart the v6.20 (7.0?) release cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Add kernel documentation for Multi Queue group GuC interface.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-36-niranjana.vishwanathapura@intel.com
|
|
Add kernel documentation for Multi Queue group and update
the corresponding rst.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-35-niranjana.vishwanathapura@intel.com
|
|
AMDGPU heavily relies on ring buffers to manage its components; as a
result, it has an elaborate mechanism of operation with multiple details
around it. This commit introduces new documentation on ring buffers,
detailing their management and expanding the explanation of Enforce
isolation. Finally, this commit also adds the documentation available in
the amdgpu_ring.c file to it.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit introduces set of information that details the different
sets of schedulers available in the SE.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit expands the overall explanation about AMD GPU IPs by adding
more details about their interconnection. Note that this commit includes
a diagram that provides additional information.
v2: fix up TMR - Trusted Memory Region
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When using UMR, a dashboard is available that displays the CPC, CPF,
CPG, TCP, and UTCL utilization. This commit introduces the meanings of
those acronyms (and others) to the glossary to improve the comprehension
of the UMR dashboard.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Timur Kristóf <timur.kristof@gmail.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
PRT = Partially Resident Texture (aka. sparse residency)
PTE = Page Table Entry
PDE = Page Directory Entry
v2:
- Add PDE
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a paragraph to the GEM Objects Creation section about the
drm_gem_huge_mnt_create() helper and to the GEM objects mapping
section explaining how transparent huge pages are handled by GEM.
v4:
- fix wording after huge_pages handler removal
v6:
- fix wording after map_pages handler removal
v11:
- mention drm_gem_huge_mnt_create() helper
- add Boris and Maíra R-bs
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20251205182231.194072-11-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Runqueues are currently almost everywhere being read unlocked in
drm/sched. At XDC 2025, the assembled developers were unsure whether
that's legal and whether it can be fixed. Someone should find out.
Add a todo entry for the unlocked runqueue reader problem.
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251107135701.244659-4-phasta@kernel.org
|
|
The GPU scheduler has a great many problems and deserves its own TODO
section.
Add a section and a first task describing the problem of
drm_sched_resubmit_jobs() being deprecated without a successor.
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251107135701.244659-3-phasta@kernel.org
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Extra drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add support for drm colorop pipeline.
- Add COLOR PIPELINE plane property.
- Add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE.
Cross-subsystem Changes:
- Attempt to use higher order mappings in system heap allocator.
- Always taint kernel with sw-sync.
Core Changes:
- Small fixes to drm/gem.
- Support emergency restore to drm-client.
- Allocate and release fb_info in single place.
- Rework ttm pipelined eviction fence handling.
Driver Changes:
- Support the drm color pipeline in vkms, amdgfx.
- Add NVJPG driver for tegra.
- Assorted small fixes and updates to rockchip, bridge/dw-hdmi-qp,
panthor.
- Add ASL CS5263 DP-to-HDMI simple bridge.
- Add and improve support for G LD070WX3-SL01 MIPI DSI, Samsung LTL106AL0,
Samsung LTL106AL01, Raystar RFF500F-AWH-DNN, Winstar WF70A8SYJHLNGA,
Wanchanglong w552946aaa, Samsung SOFEF00, Lenovo X13s panel.
- Add support for it66122 to it66121.
- Support mali-G1 gpu in panthor.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/aa5cbd50-7676-4a59-bbed-e8428af86804@linux.intel.com
|
|
Add kernel doc for drm_colorop objects.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-13-alex.hung@amd.com
|
|
Add documentation for color pipeline API.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-4-alex.hung@amd.com
|
|
https://gitlab.freedesktop.org/drm/rust/kernel into drm-next
Cross-subsystem Changes:
Rust
- Make slice::as_flattened usable on all supported versions of rustc.
- Add FromBytes::from_bytes_prefix() method.
Core Changes:
- Update Tyr in MAINTAINERS file.
- Remove redundant device ptr from Rust GEM object.
- Change how AlwaysRefCounted is implemented for GEM objects.
- Add deferred vm_bo cleanup to GPUVM and use it in Panthor.
Driver Changes:
Nova Core
- Introduction of bitfield! macro, with support for different storage sizes
and custom visibility.
- Introduction of safe converters between integer types for which the
conversion is lossless.
- GSP initialized up to fully booted state on Ampere.
- Use more future-proof register for GPU identification.
- Various simplifications and optimizations.
Nova
- Select NOVA_CORE.
- Depend on CONFIG_64BIT.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/aRxtJC0D1pQUepF4@google.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
Limit number of jobs per exec queue (Shuicheng)
Add sriov_admin sysfs tree (Michal)
Driver Changes:
Fix an uninitialized value (Thomas)
Expose a residency counter through debugfs (Mohammed Thasleem)
Workaround enabling and improvement (Tapani, Tangudu)
More Crescent Island-specific support (Sk Anirban, Lucas)
PAT entry dump imprement (Xin)
Inline gt_reset in the worker (Lucas)
Synchronize GT reset with device unbind (Balasubramani)
Do clean shutdown also when using flr (Jouni)
Fix serialization on burst of unbinds (Matt Brost)
Pagefault Refactor (Matt Brost)
Remove some unused code (Gwan-gyeong)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aQuBECxNOhudc0Bz@fedora
|
|
This small patch updates the nova todo list to
remove some tasks that have been solved lately:
* COHA is solved in this patch series
* TRSM was solved recently [1]
[1] https://lore.kernel.org/rust-for-linux/DCEJ9SV4LBJL.11EUZVXX6EB9H@nvidia.com/
Signed-off-by: Daniel del Castillo <delcastillodelarosadaniel@gmail.com>
[acourbot@nvidia.com: set prefix to "Documentation: nova:".]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251104193756.57726-4-delcastillodelarosadaniel@gmail.com>
|
|
VKMS is no longer in the platform bus, instead, it is in the faux bus.
In addition, when present, IGT picks hardware drivers instead of virtual
drivers, like VKMS or vgem, if they are not forced.
Update the documentation to use IGT_FORCE_DRIVER instead of IGT_DEVICE.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20251024110014.4614-2-jose.exposito89@gmail.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
The script is "run-tests.sh", no "run-test.sh".
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20251024110014.4614-1-jose.exposito89@gmail.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
Add xe_gt_throttle under the "GT Frequency Management" and improve the
narrative making sure the documentation for both *_freq and throttle/*
attributes follow the same style.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251029-gt-throttle-cri-v3-6-d1f5abbb8114@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
wait_on was a temporary helper function waiting for a kernel crate
equivalent.
Now that read_poll_timeout and fsleep are available, use them and remove
wait_on.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251020-nova_wait_on-v1-1-2eb87fb38d14@nvidia.com>
|
|
Backmerging to get fixes and features of v6.18-rc2.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
When a connector is created, add a `status` file to allow to update the
connector status to:
- 1 connector_status_connected
- 2 connector_status_disconnected
- 3 connector_status_unknown
If the device is enabled, updating the status hot-plug or unplugs the
connector.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-17-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Remove the configfs related TODO items from the "Runtime Configuration"
section.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-14-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Create a default subgroup at
/config/vkms/connectors/connector/possible_encoders that will contain
symbolic links to the possible encoders for the connector.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-12-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Create a default subgroup at
/config/vkms/connectors to allow to create as many connectors as
required.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-11-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Create a default subgroup at
/config/vkms/encoders/encoder/possible_crtcs that will contain symbolic
links to the possible CRTCs for the encoder.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-10-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Create a default subgroup at /config/vkms/encoders to allow to create as
many encoders as required.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-9-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Create a default subgroup at /config/vkms/planes/plane/possible_crtcs
that will contain symbolic links to the possible CRTCs for the plane.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-8-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
When a CRTC is created, add a `writeback` file to allow to enable or
disable writeback connector support
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-7-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Create a default subgroup at /config/vkms/crtcs to allow to create as
many CRTCs as required.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-6-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
When a plane is created, add a `type` file to allow to set the type:
- 0 overlay
- 1 primary
- 2 cursor
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-5-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Create a default subgroup at /config/vkms/planes to allow to create as
many planes as required.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-4-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Allow to create, enable, disable and destroy VKMS instances using
configfs.
For the moment, it is not possible to add pipeline items, so trying to
enable the device will fail printing an informative error to the log.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-3-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.19:
UAPI Changes:
Cross-subsystem Changes:
- fbcon cleanups.
- Make drivers depend on FB_TILEBLITTING instead of selecting it,
and hide FB_MODE_HELPERS.
Core Changes:
- More preparations for rust.
- Throttle dirty worker with vblank
- Use drm_for_each_bridge_in_chain_scoped in drm's bridge code and
assorted fixes.
- Ensure drm_client_modeset tests are enabled in UML.
- Rename ttm_bo_put to ttm_bo_fini, as a further step in removing the
TTM bo refcount.
- Add POST_LT_ADJ_REQ training sequence.
- Show list of removed but still allocated bridges.
- Add a simulated vblank interrupt for hardware without it,
and add some helpers to use them in vkms and hypervdrm.
Driver Changes:
- Assorted small fixes, cleanups and updates to host1x, tegra,
panthor, amdxdna, gud, vc4, ssd130x, ivpu, panfrost, panthor,
sysfb, bridge/sn65dsi86, solomon, ast, tidss.
- Convert drivers from using .round_rate() to .determine_rate()
- Add support for KD116N3730A07/A12, chromebook mt8189, JT101TM023,
LQ079L1SX01, raspberrypi 5" panels.
- Improve reclocking on tegra186+ with nouveau.
- Improve runtime pm in amdxdna.
- Add support for HTX_PAI in imx.
- Use a helper to calculate dumb buffer sizes in most drivers.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/b412fb91-8545-466a-8102-d89c0f2758a7@linux.intel.com
|
|
Backmerging to bring in 6.18-rc1.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Updating drm-misc-next to the state of v6.18-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
|
Add documentation for Xe Execution Queues and add xe_exec_queue.rst
file.
v2: Add info about how Execution queue interfaces
with other components in the driver (Matt Brost)
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251002044319.450181-2-niranjana.vishwanathapura@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The vblank timer simulates a vblank interrupt for hardware without
support. Rate-limits the display update frequency.
DRM drivers for hardware without vblank support apply display updates
ASAP. A vblank event informs DRM clients of the completed update.
Userspace compositors immediately schedule the next update, which
creates significant load on virtualization outputs. Display updates
are usually fast on virtualization outputs, as their framebuffers are
in regular system memory and there's no hardware vblank interrupt to
throttle the update rate.
The vblank timer is a HR timer that signals the vblank in software.
It limits the update frequency of a DRM driver similar to a hardware
vblank interrupt. The timer is not synchronized to the actual vblank
interval of the display.
The code has been adopted from vkms, which added the funtionality
in commit 3a0709928b17 ("drm/vkms: Add vblank events simulated by
hrtimers").
The new implementation is part of the existing vblank support,
which sets up the timer automatically. Drivers only have to start
and cancel the vblank timer as part of enabling and disabling the
CRTC. The new vblank helper library provides callbacks for struct
drm_crtc_funcs.
The standard way for handling vblank is to call drm_crtc_handle_vblank().
Drivers that require additional processing, such as vkms, can init
handle_vblank_timeout in struct drm_crtc_helper_funcs to refer to
their timeout handler.
There's a possible deadlock between drm_crtc_handle_vblank() and
hrtimer_cancel(). [1] The implementation avoids to call hrtimer_cancel()
directly and instead signals to the timer function to not restart
itself.
v4:
- fix possible race condition between timeout and atomic commit (Michael)
v3:
- avoid deadlock when cancelling timer (Ville, Lyude)
v2:
- implement vblank timer entirely in vblank helpers
- downgrade overrun warning to debug
- fix docs
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/all/20250510094757.4174662-1-zengheng4@huawei.com/ # [1]
Link: https://lore.kernel.org/r/20250916083816.30275-2-tzimmermann@suse.de
|
|
Add drm_modes_size_dumb(), a helper to calculate the dumb-buffer
scanline pitch and allocation size. Implementations of struct
drm_driver.dumb_create can call the new helper for their size
computations.
There is currently quite a bit of code duplication among DRM's
memory managers. Each calculates scanline pitch and buffer size
from the given arguments, but the implementations are inconsistent
in how they treat alignment and format support. Later patches will
unify this code on top of drm_mode_size_dumb() as much as possible.
drm_mode_size_dumb() uses existing 4CC format helpers to interpret
the given color mode. This makes the dumb-buffer interface behave
similar the kernel's video= parameter. Current per-driver implementations
again likely have subtle differences or bugs in how they support color
modes.
The dumb-buffer UAPI is only specified for known color modes. These
values describe linear, single-plane RGB color formats or legacy index
formats. Other values should not be specified. But some user space
still does. So for unknown color modes, there are a number of known
exceptions for which drm_mode_size_dumb() calculates the pitch from
the bpp value, as before. All other values work the same but print
an error.
v6:
- document additional use cases for DUMB_CREATE2 in TODO list (Tomi)
- fix typos in documentation (Tomi)
v5:
- check for overflows with check_mul_overflow() (Tomi)
v4:
- use %u conversion specifier (Geert)
- list DRM_FORMAT_Dn in UAPI docs (Geert)
- avoid dmesg spamming with drm_warn_once() (Sima)
- add more information about bpp special case (Sima)
- clarify parameters for hardware alignment
- add a TODO item for DUMB_CREATE2
v3:
- document the UAPI semantics
- compute scanline pitch from for unknown color modes (Andy, Tomi)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250821081918.79786-3-tzimmermann@suse.de
|
|
Add an initial documentation page for user mode queues.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make use of the newly-available `Alignment` type and remove the
corresponding TODO item.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.18-2025-09-19:
amdgpu:
- Fence drv clean up fix
- DPC fixes
- Misc display fixes
- Support the MMIO remap page as a ttm pool
- JPEG parser updates
- UserQ updates
- VCN ctx handling fixes
- Documentation updates
- Misc cleanups
- SMU 13.0.x updates
- SI DPM updates
- GC 11.x cleaner shader updates
- DMCUB updates
- DML fixes
- Improve fallback handling for pixel encoding
- VCN reset improvements
- DCE6 DC updates
- DSC fixes
- Use devm for i2c buses
- GPUVM locking updates
- GPUVM documentation improvements
- Drop non-DC DCE11 code
- S0ix fixes
- Backlight fix
- SR-IOV fixes
amdkfd:
- SVM updates
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250919193354.2989255-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Cross-subsystem Changes:
- Overflow: add range_overflows and range_end_overflows (Jani)
Core Changes:
- Get rid of dev->struct_mutex (Luiz)
Non-display related:
- GVT: Remove redundant ternary operators (Liao)
- Various i915_utils clean-ups (Jani)
Display related:
- Wait PSR idle before on dsb commit (Jouni)
- Fix size for for_each_set_bit() in abox iteration (Jani)
- Abstract figuring out encoder name (Jani)
- Remove FBC modulo 4 restriction for ADL-P+ (Uma)
- Panic: refactor framebuffer allocation (Jani)
- Backlight luminance control improvements (Suraj, Aaron)
- Add intel_display_device_present (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aMxX_lBxm7wd5wmi@intel.com
|
|
https://gitlab.freedesktop.org/drm/rust/kernel into drm-next
DRM Rust changes for v6.18
Alloc
- Add BorrowedPage type and AsPageIter trait
- Implement Vmalloc::to_page() and VmallocPageIter
- Implement AsPageIter for VBox and VVec
DMA & Scatterlist
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and struct sg_table
DRM
- In the DRM GEM module, simplify overall use of generics, add
DriverFile type alias and drop Object::SIZE.
Nova (Core)
- Various register!() macro improvements (paving the way for lifting
it to common driver infrastructure)
- Minor VBios fixes and refactoring
- Minor firmware request refactoring
- Advance firmware boot stages; process Booter and patch its
signature, process GSP and GSP bootloader
- Switch development fimrware version to r570.144
- Add basic firmware bindings for r570.144
- Move GSP boot code to its own module
- Clean up and take advantage of pin-init features to store most of
the driver's private data within a single allocation
- Update ARef import from sync::aref
- Add website to MAINTAINERS entry
Nova (DRM)
- Update ARef import from sync::aref
- Add website to MAINTAINERS entry
Pin-Init
- Merge pin-init PR from Benno
- `#[pin_data]` now generates a `*Projection` struct similar to the
`pin-project` crate.
- Add initializer code blocks to `[try_][pin_]init!` macros: make
initializer macros accept any number of `_: {/* arbitrary code
*/},` & make them run the code at that point.
- Make the `[try_][pin_]init!` macros expose initialized fields via
a `let` binding as `&mut T` or `Pin<&mut T>` for later fields.
Rust
- Various methods for AsBytes and FromBytes traits
Tyr
- Initial Rust driver skeleton for ARM Mali GPUs.
- It can power up the GPU, query for GPU metatdata through MMIO and
provide the metadata to userspace via DRM device IOCTL (struct
drm_panthor_dev_query).
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Danilo Krummrich" <dakr@kernel.org>
Link: https://lore.kernel.org/r/DCUC4SY6SRBD.1ZLHAIQZOC6KG@kernel.org
|
|
[Why]
When kernel documentation is generated the enum values themselves don't
end up in the documentation. This makes browsing them in HTML a lot
less useful.
[How]
Copy DC_DEBUG_MASK and DC_FEATURE_MASK enum values into matching kdoc
comments.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This has been announced so add to the table.
Link: https://www.amd.com/en/products/processors/laptop/ryzen/ai-300-series/amd-ryzen-ai-5-330.html
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The GSP firmware is a binary blob that is verified, loaded, and run by
the GSP bootloader. Its presentation is a bit peculiar as the GSP
bootloader expects to be given a DMA address to a 3-levels page table
mapping the GSP firmware at address 0 of its own address space.
Prepare such a structure containing the DMA-mapped firmware as well as
the DMA-mapped page tables, and a way to obtain the DMA handle of the
level 0 page table.
Then, move the GSP firmware instance from the `Firmware` struct to the
`start_gsp` method since it doesn't need to be kept after the GSP is
booted.
As we are performing the required ELF section parsing and radix3 page
table building, remove these items from the TODO file.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250913-nova_firmware-v6-7-9007079548b0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
