From 57531b3416448d1ced36a2a974a4085ec43d57b0 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Thu, 6 Nov 2025 17:12:09 +0100 Subject: selftests: net: local_termination: Wait for interfaces to come up It seems that most of the tests prepare the interfaces once before the test run (setup_prepare()), rely on setup_wait() to wait for link and only then run the test(s). local_termination brings the physical interfaces down and up during test run but never wait for them to come up. If the auto-negotiation takes some seconds, first test packets are being lost, which leads to false-negative test results. Use setup_wait() in run_test() to make sure auto-negotiation has been completed after all simple_if_init() calls on physical interfaces and test packets will not be lost because of the race against link establishment. Fixes: 90b9566aa5cd3f ("selftests: forwarding: add a test for local_termination.sh") Reviewed-by: Vladimir Oltean Signed-off-by: Alexander Sverdlin Link: https://patch.msgid.link/20251106161213.459501-1-alexander.sverdlin@siemens.com Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/forwarding/local_termination.sh | 2 ++ 1 file changed, 2 insertions(+) (limited to 'tools') diff --git a/tools/testing/selftests/net/forwarding/local_termination.sh b/tools/testing/selftests/net/forwarding/local_termination.sh index ecd34f364125..892895659c7e 100755 --- a/tools/testing/selftests/net/forwarding/local_termination.sh +++ b/tools/testing/selftests/net/forwarding/local_termination.sh @@ -176,6 +176,8 @@ run_test() local rcv_dmac=$(mac_get $rcv_if_name) local should_receive + setup_wait + tcpdump_start $rcv_if_name mc_route_prepare $send_if_name -- cgit v1.2.3 From 60260ad935861f6b8db7c65c23faa41c98d8fb15 Mon Sep 17 00:00:00 2001 From: Victor Nogueira Date: Thu, 6 Nov 2025 17:56:21 -0300 Subject: selftests/tc-testing: Create tests trying to add children to clsact/ingress qdiscs In response to Wang's bug report [1], add the following test cases: - Try and fail to add an fq child to an ingress qdisc - Try and fail to add an fq child to a clsact qdisc [1] https://lore.kernel.org/netdev/20251105022213.1981982-1-wangliang74@huawei.com/ Reviewed-by: Pedro Tammela Acked-by: Jamal Hadi Salim Signed-off-by: Victor Nogueira Reviewed-by: Cong Wang Link: https://patch.msgid.link/20251106205621.3307639-2-victor@mojatatu.com Signed-off-by: Jakub Kicinski --- .../tc-testing/tc-tests/infra/qdiscs.json | 44 ++++++++++++++++++++++ 1 file changed, 44 insertions(+) (limited to 'tools') diff --git a/tools/testing/selftests/tc-testing/tc-tests/infra/qdiscs.json b/tools/testing/selftests/tc-testing/tc-tests/infra/qdiscs.json index 998e5a2f4579..0091bcd91c2c 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/infra/qdiscs.json +++ b/tools/testing/selftests/tc-testing/tc-tests/infra/qdiscs.json @@ -961,5 +961,49 @@ "teardown": [ "$TC qdisc del dev $DUMMY root" ] + }, + { + "id": "4989", + "name": "Try to add an fq child to an ingress qdisc", + "category": [ + "qdisc", + "ingress" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$TC qdisc add dev $DUMMY handle ffff:0 ingress" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY parent ffff:0 handle ffe0:0 fq", + "expExitCode": "2", + "verifyCmd": "$TC -j qdisc ls dev $DUMMY handle ffe0:", + "matchJSON": [], + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY ingress" + ] + }, + { + "id": "c2b0", + "name": "Try to add an fq child to a clsact qdisc", + "category": [ + "qdisc", + "ingress" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$TC qdisc add dev $DUMMY handle ffff:0 clsact" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY parent ffff:0 handle ffe0:0 fq", + "expExitCode": "2", + "verifyCmd": "$TC -j qdisc ls dev $DUMMY handle ffe0:", + "matchJSON": [], + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY clsact" + ] } ] -- cgit v1.2.3 From 41d0c31be29fdee2535028ce70a6661e3a67bb25 Mon Sep 17 00:00:00 2001 From: Zahari Doychev Date: Thu, 6 Nov 2025 16:15:28 +0100 Subject: tools: ynl: call nested attribute free function for indexed arrays When freeing indexed arrays, the corresponding free function should be called for each entry of the indexed array. For example, for for 'struct tc_act_attrs' 'tc_act_attrs_free(...)' needs to be called for each entry. Previously, memory leaks were reported when enabling the ASAN analyzer. ================================================================= ==874==ERROR: LeakSanitizer: detected memory leaks Direct leak of 24 byte(s) in 1 object(s) allocated from: #0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67 #1 0x55c98db048af in tc_act_attrs_set_options_vlan_parms ../generated/tc-user.h:2813 #2 0x55c98db048af in main ./linux/tools/net/ynl/samples/tc-filter-add.c:71 Direct leak of 24 byte(s) in 1 object(s) allocated from: #0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67 #1 0x55c98db04a93 in tc_act_attrs_set_options_vlan_parms ../generated/tc-user.h:2813 #2 0x55c98db04a93 in main ./linux/tools/net/ynl/samples/tc-filter-add.c:74 Direct leak of 10 byte(s) in 2 object(s) allocated from: #0 0x7f221fd20cb5 in malloc ./debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:67 #1 0x55c98db0527d in tc_act_attrs_set_kind ../generated/tc-user.h:1622 SUMMARY: AddressSanitizer: 58 byte(s) leaked in 4 allocation(s). The following diff illustrates the changes introduced compared to the previous version of the code. void tc_flower_attrs_free(struct tc_flower_attrs *obj) { + unsigned int i; + free(obj->indev); + for (i = 0; i < obj->_count.act; i++) + tc_act_attrs_free(&obj->act[i]); free(obj->act); free(obj->key_eth_dst); free(obj->key_eth_dst_mask); Signed-off-by: Zahari Doychev Reviewed-by: Jakub Kicinski Link: https://patch.msgid.link/20251106151529.453026-3-zahari.doychev@linux.com Signed-off-by: Jakub Kicinski --- tools/net/ynl/pyynl/ynl_gen_c.py | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'tools') diff --git a/tools/net/ynl/pyynl/ynl_gen_c.py b/tools/net/ynl/pyynl/ynl_gen_c.py index 58086b101057..aadeb3abcad8 100755 --- a/tools/net/ynl/pyynl/ynl_gen_c.py +++ b/tools/net/ynl/pyynl/ynl_gen_c.py @@ -861,6 +861,18 @@ class TypeIndexedArray(Type): return [f"{member} = {self.c_name};", f"{presence} = n_{self.c_name};"] + def free_needs_iter(self): + return self.sub_type == 'nest' + + def _free_lines(self, ri, var, ref): + lines = [] + if self.sub_type == 'nest': + lines += [ + f"for (i = 0; i < {var}->{ref}_count.{self.c_name}; i++)", + f'{self.nested_render_name}_free(&{var}->{ref}{self.c_name}[i]);', + ] + lines += f"free({var}->{ref}{self.c_name});", + return lines class TypeNestTypeValue(Type): def _complex_member_type(self, ri): -- cgit v1.2.3 From 39acc6a95eefcf814efa226d8813f89e7e03496e Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 7 Nov 2025 06:03:38 -0800 Subject: selftest: netcons: refactor target creation Extract the netconsole target creation from create_dynamic_target(), by moving it from create_dynamic_target() into a new helper function. This enables other tests to use the creation of netconsole targets with arbitrary parameters and no sleep. The new helper will be utilized by forthcoming torture-type selftests that require dynamic target management. Signed-off-by: Breno Leitao Reviewed-by: Simon Horman Link: https://patch.msgid.link/20251107-netconsole_torture-v10-2-749227b55f63@debian.org Signed-off-by: Jakub Kicinski --- .../selftests/drivers/net/lib/sh/lib_netcons.sh | 30 ++++++++++++++-------- 1 file changed, 19 insertions(+), 11 deletions(-) (limited to 'tools') diff --git a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh index 8e1085e89647..9b5ef8074440 100644 --- a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh +++ b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh @@ -113,31 +113,39 @@ function set_network() { configure_ip } -function create_dynamic_target() { - local FORMAT=${1:-"extended"} +function _create_dynamic_target() { + local FORMAT="${1:?FORMAT parameter required}" + local NCPATH="${2:?NCPATH parameter required}" DSTMAC=$(ip netns exec "${NAMESPACE}" \ ip link show "${DSTIF}" | awk '/ether/ {print $2}') # Create a dynamic target - mkdir "${NETCONS_PATH}" + mkdir "${NCPATH}" - echo "${DSTIP}" > "${NETCONS_PATH}"/remote_ip - echo "${SRCIP}" > "${NETCONS_PATH}"/local_ip - echo "${DSTMAC}" > "${NETCONS_PATH}"/remote_mac - echo "${SRCIF}" > "${NETCONS_PATH}"/dev_name + echo "${DSTIP}" > "${NCPATH}"/remote_ip + echo "${SRCIP}" > "${NCPATH}"/local_ip + echo "${DSTMAC}" > "${NCPATH}"/remote_mac + echo "${SRCIF}" > "${NCPATH}"/dev_name if [ "${FORMAT}" == "basic" ] then # Basic target does not support release - echo 0 > "${NETCONS_PATH}"/release - echo 0 > "${NETCONS_PATH}"/extended + echo 0 > "${NCPATH}"/release + echo 0 > "${NCPATH}"/extended elif [ "${FORMAT}" == "extended" ] then - echo 1 > "${NETCONS_PATH}"/extended + echo 1 > "${NCPATH}"/extended fi - echo 1 > "${NETCONS_PATH}"/enabled + echo 1 > "${NCPATH}"/enabled + +} + +function create_dynamic_target() { + local FORMAT=${1:-"extended"} + local NCPATH=${2:-"$NETCONS_PATH"} + _create_dynamic_target "${FORMAT}" "${NCPATH}" # This will make sure that the kernel was able to # load the netconsole driver configuration. The console message -- cgit v1.2.3 From 6701896eb90998ff16338f199144bd9deefb79ba Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 7 Nov 2025 06:03:39 -0800 Subject: selftest: netcons: create a torture test Create a netconsole test that puts a lot of pressure on the netconsole list manipulation. Do it by creating dynamic targets and deleting targets while messages are being sent. Also put interface down while the messages are being sent, as creating parallel targets. The code launches three background jobs on distinct schedules: * Toggle netcons target every 30 iterations * create and delete random_target every 50 iterations * toggle iface every 70 iterations This creates multiple concurrency sources that interact with netconsole states. This is good practice to simulate stress, and exercise netpoll and netconsole locks. This test already found an issue as reported in [1] Link: https://lore.kernel.org/all/20250901-netpoll_memleak-v1-1-34a181977dfc@debian.org/ [1] Signed-off-by: Breno Leitao Reviewed-by: Andre Carvalho Reviewed-by: Simon Horman Link: https://patch.msgid.link/20251107-netconsole_torture-v10-3-749227b55f63@debian.org Signed-off-by: Jakub Kicinski --- tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/netcons_torture.sh | 130 +++++++++++++++++++++ 2 files changed, 131 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/netcons_torture.sh (limited to 'tools') diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile index 6e41635bd55a..71ee69e524d7 100644 --- a/tools/testing/selftests/drivers/net/Makefile +++ b/tools/testing/selftests/drivers/net/Makefile @@ -18,6 +18,7 @@ TEST_PROGS := \ netcons_fragmented_msg.sh \ netcons_overflow.sh \ netcons_sysdata.sh \ + netcons_torture.sh \ netpoll_basic.py \ ping.py \ psp.py \ diff --git a/tools/testing/selftests/drivers/net/netcons_torture.sh b/tools/testing/selftests/drivers/net/netcons_torture.sh new file mode 100755 index 000000000000..2ce9ee3719d1 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netcons_torture.sh @@ -0,0 +1,130 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-2.0 + +# Repeatedly send kernel messages, toggles netconsole targets on and off, +# creates and deletes targets in parallel, and toggles the source interface to +# simulate stress conditions. +# +# This test aims to verify the robustness of netconsole under dynamic +# configurations and concurrent operations. +# +# The major goal is to run this test with LOCKDEP, Kmemleak and KASAN to make +# sure no issues is reported. +# +# Author: Breno Leitao + +set -euo pipefail + +SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +source "${SCRIPTDIR}"/lib/sh/lib_netcons.sh + +# Number of times the main loop run +ITERATIONS=${1:-150} + +# Only test extended format +FORMAT="extended" +# And ipv6 only +IP_VERSION="ipv6" + +# Create, enable and delete some targets. +create_and_delete_random_target() { + COUNT=2 + RND_PREFIX=$(mktemp -u netcons_rnd_XXXX_) + + if [ -d "${NETCONS_CONFIGFS}/${RND_PREFIX}${COUNT}" ] || \ + [ -d "${NETCONS_CONFIGFS}/${RND_PREFIX}0" ]; then + echo "Function didn't finish yet, skipping it." >&2 + return + fi + + # enable COUNT targets + for i in $(seq ${COUNT}) + do + RND_TARGET="${RND_PREFIX}"${i} + RND_TARGET_PATH="${NETCONS_CONFIGFS}"/"${RND_TARGET}" + + # Basic population so the target can come up + _create_dynamic_target "${FORMAT}" "${RND_TARGET_PATH}" + done + + echo "netconsole selftest: ${COUNT} additional targets were created" > /dev/kmsg + # disable them all + for i in $(seq ${COUNT}) + do + RND_TARGET="${RND_PREFIX}"${i} + RND_TARGET_PATH="${NETCONS_CONFIGFS}"/"${RND_TARGET}" + if [[ $(cat "${RND_TARGET_PATH}/enabled") -eq 1 ]] + then + echo 0 > "${RND_TARGET_PATH}"/enabled + fi + rmdir "${RND_TARGET_PATH}" + done +} + +# Disable and enable the target mid-air, while messages +# are being transmitted. +toggle_netcons_target() { + for i in $(seq 2) + do + if [ ! -d "${NETCONS_PATH}" ] + then + break + fi + echo 0 > "${NETCONS_PATH}"/enabled 2> /dev/null || true + # Try to enable a bit harder, given it might fail to enable + # Write to `enabled` might fail depending on the lock, which is + # highly contentious here + for _ in $(seq 5) + do + echo 1 > "${NETCONS_PATH}"/enabled 2> /dev/null || true + done + done +} + +toggle_iface(){ + ip link set "${SRCIF}" down + ip link set "${SRCIF}" up +} + +# Start here + +modprobe netdevsim 2> /dev/null || true +modprobe netconsole 2> /dev/null || true + +# Check for basic system dependency and exit if not found +check_for_dependencies +# Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5) +echo "6 5" > /proc/sys/kernel/printk +# Remove the namespace, interfaces and netconsole target on exit +trap cleanup EXIT +# Create one namespace and two interfaces +set_network "${IP_VERSION}" +# Create a dynamic target for netconsole +create_dynamic_target "${FORMAT}" + +for i in $(seq "$ITERATIONS") +do + for _ in $(seq 10) + do + echo "${MSG}: ${TARGET} ${i}" > /dev/kmsg + done + wait + + if (( i % 30 == 0 )); then + toggle_netcons_target & + fi + + if (( i % 50 == 0 )); then + # create some targets, enable them, send msg and disable + # all in a parallel thread + create_and_delete_random_target & + fi + + if (( i % 70 == 0 )); then + toggle_iface & + fi +done +wait + +exit "${EXIT_STATUS}" -- cgit v1.2.3 From 236682db3b6fe71cad76ac5e920ea4c14a33178e Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 7 Nov 2025 06:03:40 -0800 Subject: selftest: netcons: add test for netconsole over bonded interfaces This patch adds a selftest that verifies netconsole functionality over bonded network interfaces using netdevsim. It sets up two bonded interfaces acting as transmit (TX) and receive (RX) ends, placed in separate network namespaces. The test sends kernel log messages and verifies that they are properly received on the bonded RX interfaces with both IPv4 and IPv6, and using basic and extended netconsole formats. This patchset aims to test a long-standing netpoll subsystem where netpoll has multiple users. (in this case netconsole and bonding). A similar selftest has been discussed in [1] and [2]. This test also tries to enable bonding and netpoll in different order, just to guarantee that all the possibilities are exercised. Link: https://lore.kernel.org/all/20250905-netconsole_torture-v3-0-875c7febd316@debian.org/ [1] Link: https://lore.kernel.org/lkml/96b940137a50e5c387687bb4f57de8b0435a653f.1404857349.git.decot@googlers.com/ [2] Signed-off-by: Breno Leitao Reviewed-by: Simon Horman Link: https://patch.msgid.link/20251107-netconsole_torture-v10-4-749227b55f63@debian.org Signed-off-by: Jakub Kicinski --- .../testing/selftests/drivers/net/bonding/Makefile | 2 + tools/testing/selftests/drivers/net/bonding/config | 4 + .../drivers/net/bonding/netcons_over_bonding.sh | 361 +++++++++++++++++++++ .../selftests/drivers/net/lib/sh/lib_netcons.sh | 54 ++- 4 files changed, 414 insertions(+), 7 deletions(-) create mode 100755 tools/testing/selftests/drivers/net/bonding/netcons_over_bonding.sh (limited to 'tools') diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile index 402d4ee84f2e..6c5c60adb5e8 100644 --- a/tools/testing/selftests/drivers/net/bonding/Makefile +++ b/tools/testing/selftests/drivers/net/bonding/Makefile @@ -14,6 +14,7 @@ TEST_PROGS := \ dev_addr_lists.sh \ mode-1-recovery-updelay.sh \ mode-2-recovery-updelay.sh \ + netcons_over_bonding.sh \ # end of TEST_PROGS TEST_FILES := \ @@ -24,6 +25,7 @@ TEST_FILES := \ TEST_INCLUDES := \ ../../../net/lib.sh \ + ../lib/sh/lib_netcons.sh \ ../../../net/forwarding/lib.sh \ # end of TEST_INCLUDES diff --git a/tools/testing/selftests/drivers/net/bonding/config b/tools/testing/selftests/drivers/net/bonding/config index 6bb290abd48b..991494376223 100644 --- a/tools/testing/selftests/drivers/net/bonding/config +++ b/tools/testing/selftests/drivers/net/bonding/config @@ -1,5 +1,6 @@ CONFIG_BONDING=y CONFIG_BRIDGE=y +CONFIG_CONFIGFS_FS=y CONFIG_DUMMY=y CONFIG_INET_ESP=y CONFIG_INET_ESP_OFFLOAD=y @@ -9,6 +10,9 @@ CONFIG_MACVLAN=y CONFIG_NET_ACT_GACT=y CONFIG_NET_CLS_FLOWER=y CONFIG_NET_CLS_MATCHALL=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETCONSOLE_EXTENDED_LOG=y CONFIG_NETDEVSIM=m CONFIG_NET_SCH_INGRESS=y CONFIG_NLMON=y diff --git a/tools/testing/selftests/drivers/net/bonding/netcons_over_bonding.sh b/tools/testing/selftests/drivers/net/bonding/netcons_over_bonding.sh new file mode 100755 index 000000000000..477cc9379500 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/netcons_over_bonding.sh @@ -0,0 +1,361 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-2.0 +# +# This selftest exercises trying to have multiple netpoll users at the same +# time. +# +# This selftest has multiple smalls test inside, and the goal is to +# get interfaces with bonding and netconsole in different orders in order +# to catch any possible issue. +# +# The main test composes of four interfaces being created using netdevsim; two +# of them are bonded to serve as the netconsole's transmit interface. The +# remaining two interfaces are similarly bonded and assigned to a separate +# network namespace, which acts as the receive interface, where socat monitors +# for incoming messages. +# +# A netconsole message is then sent to ensure it is properly received across +# this configuration. +# +# Later, run a few other tests, to make sure that bonding and netconsole +# cannot coexist. +# +# The test's objective is to exercise netpoll usage when managed simultaneously +# by multiple subsystems (netconsole and bonding). +# +# Author: Breno Leitao + +set -euo pipefail + +SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +source "${SCRIPTDIR}"/../lib/sh/lib_netcons.sh + +modprobe netdevsim 2> /dev/null || true +modprobe netconsole 2> /dev/null || true +modprobe bonding 2> /dev/null || true +modprobe veth 2> /dev/null || true + +# The content of kmsg will be save to the following file +OUTPUT_FILE="/tmp/${TARGET}" + +# Check for basic system dependency and exit if not found +check_for_dependencies +# Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5) +echo "6 5" > /proc/sys/kernel/printk +# Remove the namespace, interfaces and netconsole target on exit +trap cleanup_bond EXIT + +FORMAT="extended" +IP_VERSION="ipv4" +VETH0="veth"$(( RANDOM % 256)) +VETH1="veth"$((256 + RANDOM % 256)) +TXNS="" +RXNS="" + +# Create "bond_tx_XX" and "bond_rx_XX" interfaces, and set DSTIF and SRCIF with +# the bonding interfaces +function setup_bonding_ifaces() { + local RAND=$(( RANDOM % 100 )) + BOND_TX_MAIN_IF="bond_tx_$RAND" + BOND_RX_MAIN_IF="bond_rx_$RAND" + + # Setup TX + if ! ip -n "${TXNS}" link add "${BOND_TX_MAIN_IF}" type bond mode balance-rr + then + echo "Failed to create bond TX interface. Is CONFIG_BONDING set?" >&2 + # only clean nsim ifaces and namespace. Nothing else has been + # initialized + cleanup_bond_nsim + trap - EXIT + exit "${ksft_skip}" + fi + + # create_netdevsim() got the interface up, but it needs to be down + # before being enslaved. + ip -n "${TXNS}" \ + link set "${BOND_TX1_SLAVE_IF}" down + ip -n "${TXNS}" \ + link set "${BOND_TX2_SLAVE_IF}" down + ip -n "${TXNS}" \ + link set "${BOND_TX1_SLAVE_IF}" master "${BOND_TX_MAIN_IF}" + ip -n "${TXNS}" \ + link set "${BOND_TX2_SLAVE_IF}" master "${BOND_TX_MAIN_IF}" + ip -n "${TXNS}" \ + link set "${BOND_TX_MAIN_IF}" up + + # Setup RX + ip -n "${RXNS}" \ + link add "${BOND_RX_MAIN_IF}" type bond mode balance-rr + ip -n "${RXNS}" \ + link set "${BOND_RX1_SLAVE_IF}" down + ip -n "${RXNS}" \ + link set "${BOND_RX2_SLAVE_IF}" down + ip -n "${RXNS}" \ + link set "${BOND_RX1_SLAVE_IF}" master "${BOND_RX_MAIN_IF}" + ip -n "${RXNS}" \ + link set "${BOND_RX2_SLAVE_IF}" master "${BOND_RX_MAIN_IF}" + ip -n "${RXNS}" \ + link set "${BOND_RX_MAIN_IF}" up + + export DSTIF="${BOND_RX_MAIN_IF}" + export SRCIF="${BOND_TX_MAIN_IF}" +} + +# Create 4 netdevsim interfaces. Two of them will be bound to TX bonding iface +# and the other two will be bond to the RX interface (on the other namespace) +function create_ifaces_bond() { + BOND_TX1_SLAVE_IF=$(create_netdevsim "${NSIM_BOND_TX_1}" "${TXNS}") + BOND_TX2_SLAVE_IF=$(create_netdevsim "${NSIM_BOND_TX_2}" "${TXNS}") + BOND_RX1_SLAVE_IF=$(create_netdevsim "${NSIM_BOND_RX_1}" "${RXNS}") + BOND_RX2_SLAVE_IF=$(create_netdevsim "${NSIM_BOND_RX_2}" "${RXNS}") +} + +# netdevsim link BOND_TX to BOND_RX interfaces +function link_ifaces_bond() { + local BOND_TX1_SLAVE_IFIDX + local BOND_TX2_SLAVE_IFIDX + local BOND_RX1_SLAVE_IFIDX + local BOND_RX2_SLAVE_IFIDX + local TXNS_FD + local RXNS_FD + + BOND_TX1_SLAVE_IFIDX=$(ip netns exec "${TXNS}" \ + cat /sys/class/net/"$BOND_TX1_SLAVE_IF"/ifindex) + BOND_TX2_SLAVE_IFIDX=$(ip netns exec "${TXNS}" \ + cat /sys/class/net/"$BOND_TX2_SLAVE_IF"/ifindex) + BOND_RX1_SLAVE_IFIDX=$(ip netns exec "${RXNS}" \ + cat /sys/class/net/"$BOND_RX1_SLAVE_IF"/ifindex) + BOND_RX2_SLAVE_IFIDX=$(ip netns exec "${RXNS}" \ + cat /sys/class/net/"$BOND_RX2_SLAVE_IF"/ifindex) + + exec {TXNS_FD} "$NSIM_DEV_SYS_LINK" + echo "${TXNS_FD}:$BOND_TX2_SLAVE_IFIDX $RXNS_FD:$BOND_RX2_SLAVE_IFIDX" \ + > "$NSIM_DEV_SYS_LINK" + + exec {TXNS_FD}<&- + exec {RXNS_FD}<&- +} + +function create_all_ifaces() { + # setup_ns function is coming from lib.sh + setup_ns TXNS RXNS + export NAMESPACE="${RXNS}" + + # Create two interfaces for RX and two for TX + create_ifaces_bond + # Link netlink ifaces + link_ifaces_bond +} + +# configure DSTIF and SRCIF IPs +function configure_ifaces_ips() { + local IP_VERSION=${1:-"ipv4"} + select_ipv4_or_ipv6 "${IP_VERSION}" + + ip -n "${RXNS}" addr add "${DSTIP}"/24 dev "${DSTIF}" + ip -n "${RXNS}" link set "${DSTIF}" up + + ip -n "${TXNS}" addr add "${SRCIP}"/24 dev "${SRCIF}" + ip -n "${TXNS}" link set "${SRCIF}" up +} + +function test_enable_netpoll_on_enslaved_iface() { + echo 0 > "${NETCONS_PATH}"/enabled + + # At this stage, BOND_TX1_SLAVE_IF is enslaved to BOND_TX_MAIN_IF, and + # linked to BOND_RX1_SLAVE_IF inside the namespace. + echo "${BOND_TX1_SLAVE_IF}" > "${NETCONS_PATH}"/dev_name + + # This should fail with the following message in dmesg: + # netpoll: netconsole: ethX is a slave device, aborting + set +e + enable_netcons_ns 2> /dev/null + set -e + + if [[ $(cat "${NETCONS_PATH}"/enabled) -eq 1 ]] + then + echo "test failed: Bonding and netpoll cannot co-exists." >&2 + exit "${ksft_fail}" + fi +} + +function test_delete_bond_and_reenable_target() { + ip -n "${TXNS}" \ + link delete "${BOND_TX_MAIN_IF}" type bond + + # BOND_TX1_SLAVE_IF is not attached to a bond interface anymore + # netpoll can be plugged in there + echo "${BOND_TX1_SLAVE_IF}" > "${NETCONS_PATH}"/dev_name + + # this should work, since the interface is not enslaved + enable_netcons_ns + + if [[ $(cat "${NETCONS_PATH}"/enabled) -eq 0 ]] + then + echo "test failed: Unable to start netpoll on an unbond iface." >&2 + exit "${ksft_fail}" + fi +} + +# Send a netconsole message to the netconsole target +function test_send_netcons_msg_through_bond_iface() { + # Listen for netconsole port inside the namespace and + # destination interface + listen_port_and_save_to "${OUTPUT_FILE}" "${IP_VERSION}" & + # Wait for socat to start and listen to the port. + wait_for_port "${RXNS}" "${PORT}" "${IP_VERSION}" + # Send the message + echo "${MSG}: ${TARGET}" > /dev/kmsg + # Wait until socat saves the file to disk + busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}" + # Make sure the message was received in the dst part + # and exit + validate_result "${OUTPUT_FILE}" "${FORMAT}" + # kill socat in case it is still running + pkill_socat +} + +# BOND_TX1_SLAVE_IF has netconsole enabled on it, bind it to BOND_TX_MAIN_IF. +# Given BOND_TX_MAIN_IF was deleted, recreate it first +function test_enslave_netcons_enabled_iface { + # netconsole got disabled while the interface was down + if [[ $(cat "${NETCONS_PATH}"/enabled) -eq 0 ]] + then + echo "test failed: netconsole expected to be enabled against BOND_TX1_SLAVE_IF" >&2 + exit "${ksft_fail}" + fi + + # recreate the bonding iface. it got deleted by previous + # test (test_delete_bond_and_reenable_target) + ip -n "${TXNS}" \ + link add "${BOND_TX_MAIN_IF}" type bond mode balance-rr + + # sub-interface need to be down before attaching to bonding + # This will also disable netconsole. + ip -n "${TXNS}" \ + link set "${BOND_TX1_SLAVE_IF}" down + ip -n "${TXNS}" \ + link set "${BOND_TX1_SLAVE_IF}" master "${BOND_TX_MAIN_IF}" + ip -n "${TXNS}" \ + link set "${BOND_TX_MAIN_IF}" up + + # netconsole got disabled while the interface was down + if [[ $(cat "${NETCONS_PATH}"/enabled) -eq 1 ]] + then + echo "test failed: Device is part of a bond iface, cannot have netcons enabled" >&2 + exit "${ksft_fail}" + fi +} + +# Get netconsole enabled on a bonding interface and attach a second +# sub-interface. +function test_enslave_iface_to_bond { + # BOND_TX_MAIN_IF has only BOND_TX1_SLAVE_IF right now + echo "${BOND_TX_MAIN_IF}" > "${NETCONS_PATH}"/dev_name + enable_netcons_ns + + # netcons is attached to bond0 and BOND_TX1_SLAVE_IF is + # part of BOND_TX_MAIN_IF. Attach BOND_TX2_SLAVE_IF to BOND_TX_MAIN_IF. + ip -n "${TXNS}" \ + link set "${BOND_TX2_SLAVE_IF}" master "${BOND_TX_MAIN_IF}" + if [[ $(cat "${NETCONS_PATH}"/enabled) -eq 0 ]] + then + echo "test failed: Netconsole should be enabled on bonding interface. Failed" >&2 + exit "${ksft_fail}" + fi +} + +function test_enslave_iff_disabled_netpoll_iface { + local ret + + # Create two interfaces. veth interfaces it known to have + # IFF_DISABLE_NETPOLL set + if ! ip link add "${VETH0}" type veth peer name "${VETH1}" + then + echo "Failed to create veth TX interface. Is CONFIG_VETH set?" >&2 + exit "${ksft_skip}" + fi + set +e + # This will print RTNETLINK answers: Device or resource busy + ip link set "${VETH0}" master "${BOND_TX_MAIN_IF}" 2> /dev/null + ret=$? + set -e + if [[ $ret -eq 0 ]] + then + echo "test failed: veth interface could not be enslaved" + exit "${ksft_fail}" + fi +} + +# Given that netconsole picks the current net namespace, we need to enable it +# from inside the TXNS namespace +function enable_netcons_ns() { + ip netns exec "${TXNS}" sh -c \ + "mount -t configfs configfs /sys/kernel/config && echo 1 > $NETCONS_PATH/enabled" +} + +#################### +# Tests start here # +#################### + +# Create regular interfaces using netdevsim and link them +create_all_ifaces + +# Setup the bonding interfaces +# BOND_RX_MAIN_IF has BOND_RX{1,2}_SLAVE_IF +# BOND_TX_MAIN_IF has BOND_TX{1,2}_SLAVE_IF +setup_bonding_ifaces + +# Configure the ips as BOND_RX1_SLAVE_IF and BOND_TX1_SLAVE_IF +configure_ifaces_ips "${IP_VERSION}" + +_create_dynamic_target "${FORMAT}" "${NETCONS_PATH}" +enable_netcons_ns +set_user_data + +# Test #1 : Create an bonding interface and attach netpoll into +# the bonding interface. Netconsole/netpoll should work on +# the bonding interface. +test_send_netcons_msg_through_bond_iface +echo "test #1: netpoll on bonding interface worked. Test passed" >&2 + +# Test #2: Attach netpoll to an enslaved interface +# Try to attach netpoll to an enslaved sub-interface (while still being part of +# a bonding interface), which shouldn't be allowed +test_enable_netpoll_on_enslaved_iface +echo "test #2: netpoll correctly rejected enslaved interface (expected behavior). Test passed." >&2 + +# Test #3: Unplug the sub-interface from bond and enable netconsole +# Detach the interface from a bonding interface and attach netpoll again +test_delete_bond_and_reenable_target +echo "test #3: Able to attach to an unbound interface. Test passed." >&2 + +# Test #4: Enslave a sub-interface that had netconsole enabled +# Try to enslave an interface that has netconsole/netpoll enabled. +# Previous test has netconsole enabled in BOND_TX1_SLAVE_IF, try to enslave it +test_enslave_netcons_enabled_iface +echo "test #4: Enslaving an interface with netpoll attached. Test passed." >&2 + +# Test #5: Enslave a sub-interface to a bonding interface +# Enslave an interface to a bond interface that has netpoll attached +# At this stage, BOND_TX_MAIN_IF is created and BOND_TX1_SLAVE_IF is part of +# it. Netconsole is currently disabled +test_enslave_iface_to_bond +echo "test #5: Enslaving an interface to bond+netpoll. Test passed." >&2 + +# Test #6: Enslave a IFF_DISABLE_NETPOLL sub-interface to a bonding interface +# At this stage, BOND_TX_MAIN_IF has both sub interface and netconsole is +# enabled. This test will try to enslave an a veth (IFF_DISABLE_NETPOLL) interface +# and it should fail, with netpoll: veth0 doesn't support polling +test_enslave_iff_disabled_netpoll_iface +echo "test #6: Enslaving IFF_DISABLE_NETPOLL ifaces to bond iface is not supported. Test passed." >&2 + +cleanup_bond +trap - EXIT +exit "${EXIT_STATUS}" diff --git a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh index 9b5ef8074440..87f89fd92f8c 100644 --- a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh +++ b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh @@ -11,9 +11,11 @@ set -euo pipefail LIBDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") SRCIF="" # to be populated later +SRCIP="" # to be populated later SRCIP4="192.0.2.1" SRCIP6="fc00::1" DSTIF="" # to be populated later +DSTIP="" # to be populated later DSTIP4="192.0.2.2" DSTIP6="fc00::2" @@ -28,17 +30,23 @@ NETCONS_PATH="${NETCONS_CONFIGFS}"/"${TARGET}" # NAMESPACE will be populated by setup_ns with a random value NAMESPACE="" -# IDs for netdevsim +# IDs for netdevsim. We either use NSIM_DEV_{1,2}_ID for standard test +# or NSIM_BOND_{T,R}X_{1,2} for the bonding tests. Not both at the +# same time. NSIM_DEV_1_ID=$((256 + RANDOM % 256)) NSIM_DEV_2_ID=$((512 + RANDOM % 256)) +NSIM_BOND_TX_1=$((768 + RANDOM % 256)) +NSIM_BOND_TX_2=$((1024 + RANDOM % 256)) +NSIM_BOND_RX_1=$((1280 + RANDOM % 256)) +NSIM_BOND_RX_2=$((1536 + RANDOM % 256)) NSIM_DEV_SYS_NEW="/sys/bus/netdevsim/new_device" +NSIM_DEV_SYS_LINK="/sys/bus/netdevsim/link_device" # Used to create and delete namespaces source "${LIBDIR}"/../../../../net/lib.sh # Create netdevsim interfaces create_ifaces() { - echo "$NSIM_DEV_2_ID" > "$NSIM_DEV_SYS_NEW" echo "$NSIM_DEV_1_ID" > "$NSIM_DEV_SYS_NEW" udevadm settle 2> /dev/null || true @@ -137,9 +145,6 @@ function _create_dynamic_target() { then echo 1 > "${NCPATH}"/extended fi - - echo 1 > "${NCPATH}"/enabled - } function create_dynamic_target() { @@ -147,6 +152,8 @@ function create_dynamic_target() { local NCPATH=${2:-"$NETCONS_PATH"} _create_dynamic_target "${FORMAT}" "${NCPATH}" + echo 1 > "${NCPATH}"/enabled + # This will make sure that the kernel was able to # load the netconsole driver configuration. The console message # gets more organized/sequential as well. @@ -193,14 +200,26 @@ function do_cleanup() { echo "${DEFAULT_PRINTK_VALUES}" > /proc/sys/kernel/printk } -function cleanup() { +function cleanup_netcons() { # delete netconsole dynamic reconfiguration - echo 0 > "${NETCONS_PATH}"/enabled + # do not fail if the target is already disabled + if [[ ! -d "${NETCONS_PATH}" ]] + then + # in some cases this is called before netcons path is created + return + fi + if [[ $(cat "${NETCONS_PATH}"/enabled) != 0 ]] + then + echo 0 > "${NETCONS_PATH}"/enabled || true + fi # Remove all the keys that got created during the selftest find "${NETCONS_PATH}/userdata/" -mindepth 1 -type d -delete # Remove the configfs entry rmdir "${NETCONS_PATH}" +} +function cleanup() { + cleanup_netcons do_cleanup } @@ -377,3 +396,24 @@ function wait_for_port() { # more frequently on IPv6 sleep 1 } + +# Clean up netdevsim ifaces created for bonding test +function cleanup_bond_nsim() { + ip -n "${TXNS}" \ + link delete "${BOND_TX_MAIN_IF}" type bond || true + ip -n "${RXNS}" \ + link delete "${BOND_RX_MAIN_IF}" type bond || true + + cleanup_netdevsim "$NSIM_BOND_TX_1" + cleanup_netdevsim "$NSIM_BOND_TX_2" + cleanup_netdevsim "$NSIM_BOND_RX_1" + cleanup_netdevsim "$NSIM_BOND_RX_2" +} + +# cleanup tests that use bonding interfaces +function cleanup_bond() { + cleanup_netcons + cleanup_bond_nsim + cleanup_all_ns + ip link delete "${VETH0}" || true +} -- cgit v1.2.3 From 63c643aa7b7287fdbb0167063785f89ece3f000f Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" Date: Mon, 10 Nov 2025 19:23:40 +0100 Subject: selftests: mptcp: connect: fix fallback note due to OoO The "fallback due to TCP OoO" was never printed because the stat_ooo_now variable was checked twice: once in the parent if-statement, and one in the child one. The second condition was then always true then, and the 'else' branch was never taken. The idea is that when there are more ACK + MP_CAPABLE than expected, the test either fails if there was no out of order packets, or a notice is printed. Fixes: 69ca3d29a755 ("mptcp: update selftest for fallback due to OoO") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-1-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/mptcp/mptcp_connect.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'tools') diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.sh b/tools/testing/selftests/net/mptcp/mptcp_connect.sh index 47ecb5b3836e..9b7b93f8eb0c 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_connect.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh @@ -492,7 +492,7 @@ do_transfer() "than expected (${expect_synrx})" retc=1 fi - if [ ${stat_ackrx_now_l} -lt ${expect_ackrx} ] && [ ${stat_ooo_now} -eq 0 ]; then + if [ ${stat_ackrx_now_l} -lt ${expect_ackrx} ]; then if [ ${stat_ooo_now} -eq 0 ]; then mptcp_lib_pr_fail "lower MPC ACK rx (${stat_ackrx_now_l})" \ "than expected (${expect_ackrx})" -- cgit v1.2.3 From aea73bae662a0e184393d6d7d0feb18d2577b9b9 Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" Date: Mon, 10 Nov 2025 19:23:41 +0100 Subject: selftests: mptcp: join: rm: set backup flag Some of these 'remove' tests rarely fail because a subflow has been reset instead of cleanly removed. This can happen when one extra subflow which has never carried data is being closed (FIN) on one side, while the other is sending data for the first time. To avoid such subflows to be used right at the end, the backup flag has been added. With that, data will be only carried on the initial subflow. Fixes: d2c4333a801c ("selftests: mptcp: add testcases for removing addrs") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-2-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 54 ++++++++++++------------- 1 file changed, 27 insertions(+), 27 deletions(-) (limited to 'tools') diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 78a1aa4ecff2..9ed9ec7202d6 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -2532,7 +2532,7 @@ remove_tests() if reset "remove single subflow"; then pm_nl_set_limits $ns1 0 1 pm_nl_set_limits $ns2 0 1 - pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup addr_nr_ns2=-1 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 @@ -2545,8 +2545,8 @@ remove_tests() if reset "remove multiple subflows"; then pm_nl_set_limits $ns1 0 2 pm_nl_set_limits $ns2 0 2 - pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow - pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup addr_nr_ns2=-2 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 @@ -2557,7 +2557,7 @@ remove_tests() # single address, remove if reset "remove single address"; then pm_nl_set_limits $ns1 0 1 - pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup pm_nl_set_limits $ns2 1 1 addr_nr_ns1=-1 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 @@ -2570,9 +2570,9 @@ remove_tests() # subflow and signal, remove if reset "remove subflow and signal"; then pm_nl_set_limits $ns1 0 2 - pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup pm_nl_set_limits $ns2 1 2 - pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 @@ -2584,10 +2584,10 @@ remove_tests() # subflows and signal, remove if reset "remove subflows and signal"; then pm_nl_set_limits $ns1 0 3 - pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup pm_nl_set_limits $ns2 1 3 - pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow - pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow,backup addr_nr_ns1=-1 addr_nr_ns2=-2 speed=10 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 @@ -2599,9 +2599,9 @@ remove_tests() # addresses remove if reset "remove addresses"; then pm_nl_set_limits $ns1 3 3 - pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250 - pm_nl_add_endpoint $ns1 10.0.3.1 flags signal - pm_nl_add_endpoint $ns1 10.0.4.1 flags signal + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup id 250 + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup + pm_nl_add_endpoint $ns1 10.0.4.1 flags signal,backup pm_nl_set_limits $ns2 3 3 addr_nr_ns1=-3 speed=10 \ run_tests $ns1 $ns2 10.0.1.1 @@ -2614,10 +2614,10 @@ remove_tests() # invalid addresses remove if reset "remove invalid addresses"; then pm_nl_set_limits $ns1 3 3 - pm_nl_add_endpoint $ns1 10.0.12.1 flags signal + pm_nl_add_endpoint $ns1 10.0.12.1 flags signal,backup # broadcast IP: no packet for this address will be received on ns1 - pm_nl_add_endpoint $ns1 224.0.0.1 flags signal - pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_add_endpoint $ns1 224.0.0.1 flags signal,backup + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup pm_nl_set_limits $ns2 2 2 addr_nr_ns1=-3 speed=10 \ run_tests $ns1 $ns2 10.0.1.1 @@ -2631,10 +2631,10 @@ remove_tests() # subflows and signal, flush if reset "flush subflows and signal"; then pm_nl_set_limits $ns1 0 3 - pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup pm_nl_set_limits $ns2 1 3 - pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow - pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow,backup addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 @@ -2647,9 +2647,9 @@ remove_tests() if reset "flush subflows"; then pm_nl_set_limits $ns1 3 3 pm_nl_set_limits $ns2 3 3 - pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150 - pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow - pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup id 150 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow,backup addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 3 3 3 @@ -2666,9 +2666,9 @@ remove_tests() # addresses flush if reset "flush addresses"; then pm_nl_set_limits $ns1 3 3 - pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250 - pm_nl_add_endpoint $ns1 10.0.3.1 flags signal - pm_nl_add_endpoint $ns1 10.0.4.1 flags signal + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup id 250 + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup + pm_nl_add_endpoint $ns1 10.0.4.1 flags signal,backup pm_nl_set_limits $ns2 3 3 addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 @@ -2681,9 +2681,9 @@ remove_tests() # invalid addresses flush if reset "flush invalid addresses"; then pm_nl_set_limits $ns1 3 3 - pm_nl_add_endpoint $ns1 10.0.12.1 flags signal - pm_nl_add_endpoint $ns1 10.0.3.1 flags signal - pm_nl_add_endpoint $ns1 10.0.14.1 flags signal + pm_nl_add_endpoint $ns1 10.0.12.1 flags signal,backup + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup + pm_nl_add_endpoint $ns1 10.0.14.1 flags signal,backup pm_nl_set_limits $ns2 3 3 addr_nr_ns1=-8 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 -- cgit v1.2.3 From 6457595db9870298ee30b6d75287b8548e33fe19 Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" Date: Mon, 10 Nov 2025 19:23:42 +0100 Subject: selftests: mptcp: join: endpoints: longer transfer In rare cases, when the test environment is very slow, some userspace tests can fail because some expected events have not been seen. Because the tests are expecting a long on-going connection, and they are not waiting for the end of the transfer, it is fine to make the connection longer. This connection will be killed at the end, after the verifications, so making it longer doesn't change anything, apart from avoid it to end before the end of the verifications To play it safe, all endpoints tests not waiting for the end of the transfer are now sharing a longer file (128KB) at slow speed. Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases") Fixes: b5e2fb832f48 ("selftests: mptcp: add explicit test case for remove/readd") Fixes: e06959e9eebd ("selftests: mptcp: join: test for flush/re-add endpoints") Reviewed-by: Geliang Tang Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-3-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'tools') diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 9ed9ec7202d6..97af8d89ac5c 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -3943,7 +3943,7 @@ endpoint_tests() pm_nl_set_limits $ns1 2 2 pm_nl_set_limits $ns2 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal - { speed=slow \ + { test_linkfail=128 speed=slow \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! @@ -3970,7 +3970,7 @@ endpoint_tests() pm_nl_set_limits $ns2 0 3 pm_nl_add_endpoint $ns2 10.0.1.2 id 1 dev ns2eth1 flags subflow pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow - { test_linkfail=4 speed=5 \ + { test_linkfail=128 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! @@ -4048,7 +4048,7 @@ endpoint_tests() # broadcast IP: no packet for this address will be received on ns1 pm_nl_add_endpoint $ns1 224.0.0.1 id 2 flags signal pm_nl_add_endpoint $ns1 10.0.1.1 id 42 flags signal - { test_linkfail=4 speed=5 \ + { test_linkfail=128 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! @@ -4121,7 +4121,7 @@ endpoint_tests() # broadcast IP: no packet for this address will be received on ns1 pm_nl_add_endpoint $ns1 224.0.0.1 id 2 flags signal pm_nl_add_endpoint $ns2 10.0.3.2 id 3 flags subflow - { test_linkfail=4 speed=20 \ + { test_linkfail=128 speed=20 \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! -- cgit v1.2.3 From 290493078b96ce2ce3e60f55c23654acb678042a Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" Date: Mon, 10 Nov 2025 19:23:43 +0100 Subject: selftests: mptcp: join: userspace: longer transfer In rare cases, when the test environment is very slow, some userspace tests can fail because some expected events have not been seen. Because the tests are expecting a long on-going connection, and they are not waiting for the end of the transfer, it is fine to make the connection longer. This connection will be killed at the end, after the verifications, so making it longer doesn't change anything, apart from avoid it to end before the end of the verifications To play it safe, all userspace tests not waiting for the end of the transfer are now sharing a longer file (128KB) at slow speed. Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") Cc: stable@vger.kernel.org Fixes: b2e2248f365a ("selftests: mptcp: userspace pm create id 0 subflow") Fixes: e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow") Fixes: b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0") Reviewed-by: Geliang Tang Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-4-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'tools') diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 97af8d89ac5c..01273abfdc89 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -3806,7 +3806,7 @@ userspace_tests() continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns1 pm_nl_set_limits $ns2 2 2 - { speed=5 \ + { test_linkfail=128 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! wait_mpj $ns1 @@ -3839,7 +3839,7 @@ userspace_tests() continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns2 pm_nl_set_limits $ns1 0 1 - { speed=5 \ + { test_linkfail=128 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! wait_mpj $ns2 @@ -3867,7 +3867,7 @@ userspace_tests() continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns2 pm_nl_set_limits $ns1 0 1 - { speed=5 \ + { test_linkfail=128 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! wait_mpj $ns2 @@ -3888,7 +3888,7 @@ userspace_tests() continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns2 pm_nl_set_limits $ns1 0 1 - { speed=5 \ + { test_linkfail=128 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! wait_mpj $ns2 @@ -3912,7 +3912,7 @@ userspace_tests() continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then set_userspace_pm $ns1 pm_nl_set_limits $ns2 1 1 - { speed=5 \ + { test_linkfail=128 speed=5 \ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null local tests_pid=$! wait_mpj $ns1 -- cgit v1.2.3 From ee79980f7a428ec299f6261bea4c1084dcbc9631 Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" Date: Mon, 10 Nov 2025 19:23:44 +0100 Subject: selftests: mptcp: connect: trunc: read all recv data MPTCP Join "fastclose server" selftest is sometimes failing because the client output file doesn't have the expected size, e.g. 296B instead of 1024B. When looking at a packet trace when this happens, the server sent the expected 1024B in two parts -- 100B, then 924B -- then the MP_FASTCLOSE. It is then strange to see the client only receiving 296B, which would mean it only got a part of the second packet. The problem is then not on the networking side, but rather on the data reception side. When mptcp_connect is launched with '-f -1', it means the connection might stop before having sent everything, because a reset has been received. When this happens, the program was directly stopped. But it is also possible there are still some data to read, simply because the previous 'read' step was done with a buffer smaller than the pending data, see do_rnd_read(). In this case, it is important to read what's left in the kernel buffers before stopping without error like before. SIGPIPE is now ignored, not to quit the app before having read everything. Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-5-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/mptcp/mptcp_connect.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'tools') diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.c b/tools/testing/selftests/net/mptcp/mptcp_connect.c index b148cadb96d0..fc7e22b503d3 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_connect.c +++ b/tools/testing/selftests/net/mptcp/mptcp_connect.c @@ -710,8 +710,14 @@ static int copyfd_io_poll(int infd, int peerfd, int outfd, bw = do_rnd_write(peerfd, winfo->buf + winfo->off, winfo->len); if (bw < 0) { - if (cfg_rcv_trunc) - return 0; + /* expected reset, continue to read */ + if (cfg_rcv_trunc && + (errno == ECONNRESET || + errno == EPIPE)) { + fds.events &= ~POLLOUT; + continue; + } + perror("write"); return 111; } @@ -737,8 +743,10 @@ static int copyfd_io_poll(int infd, int peerfd, int outfd, } if (fds.revents & (POLLERR | POLLNVAL)) { - if (cfg_rcv_trunc) - return 0; + if (cfg_rcv_trunc) { + fds.events &= ~(POLLERR | POLLNVAL); + continue; + } fprintf(stderr, "Unexpected revents: " "POLLERR/POLLNVAL(%x)\n", fds.revents); return 5; @@ -1433,7 +1441,7 @@ static void parse_opts(int argc, char **argv) */ if (cfg_truncate < 0) { cfg_rcv_trunc = true; - signal(SIGPIPE, handle_signal); + signal(SIGPIPE, SIG_IGN); } break; case 'j': -- cgit v1.2.3 From 852b644acbce1529307a4bb283752c4e77b5cda7 Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" Date: Mon, 10 Nov 2025 19:23:45 +0100 Subject: selftests: mptcp: join: properly kill background tasks The 'run_tests' function is executed in the background, but killing its associated PID would not kill the children tasks running in the background. To properly kill all background tasks, 'kill -- -PID' could be used, but this requires kill from procps-ng. Instead, all children tasks are listed using 'ps', and 'kill' is called with all PIDs of this group. Fixes: 31ee4ad86afd ("selftests: mptcp: join: stop transfer when check is done (part 1)") Cc: stable@vger.kernel.org Fixes: 04b57c9e096a ("selftests: mptcp: join: stop transfer when check is done (part 2)") Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-6-a4332c714e10@kernel.org Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 18 +++++++++--------- tools/testing/selftests/net/mptcp/mptcp_lib.sh | 21 +++++++++++++++++++++ 2 files changed, 30 insertions(+), 9 deletions(-) (limited to 'tools') diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 01273abfdc89..41503c241989 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -3831,7 +3831,7 @@ userspace_tests() chk_mptcp_info subflows 0 subflows 0 chk_subflows_total 1 1 kill_events_pids - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid fi # userspace pm create destroy subflow @@ -3859,7 +3859,7 @@ userspace_tests() chk_mptcp_info subflows 0 subflows 0 chk_subflows_total 1 1 kill_events_pids - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid fi # userspace pm create id 0 subflow @@ -3880,7 +3880,7 @@ userspace_tests() chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 2 2 kill_events_pids - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid fi # userspace pm remove initial subflow @@ -3904,7 +3904,7 @@ userspace_tests() chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 1 1 kill_events_pids - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid fi # userspace pm send RM_ADDR for ID 0 @@ -3930,7 +3930,7 @@ userspace_tests() chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 1 1 kill_events_pids - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid fi } @@ -3960,7 +3960,7 @@ endpoint_tests() pm_nl_add_endpoint $ns2 10.0.2.2 flags signal pm_nl_check_endpoint "modif is allowed" \ $ns2 10.0.2.2 id 1 flags signal - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid fi if reset_with_tcp_filter "delete and re-add" ns2 10.0.3.2 REJECT OUTPUT && @@ -4015,7 +4015,7 @@ endpoint_tests() chk_mptcp_info subflows 3 subflows 3 done - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid kill_events_pids chk_evt_nr ns1 MPTCP_LIB_EVENT_LISTENER_CREATED 1 @@ -4089,7 +4089,7 @@ endpoint_tests() wait_mpj $ns2 chk_subflow_nr "after re-re-add ID 0" 3 chk_mptcp_info subflows 3 subflows 3 - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid kill_events_pids chk_evt_nr ns1 MPTCP_LIB_EVENT_LISTENER_CREATED 1 @@ -4137,7 +4137,7 @@ endpoint_tests() wait_mpj $ns2 pm_nl_add_endpoint $ns1 10.0.3.1 id 2 flags signal wait_mpj $ns2 - mptcp_lib_kill_wait $tests_pid + mptcp_lib_kill_group_wait $tests_pid join_syn_tx=3 join_connect_err=1 \ chk_join_nr 2 2 2 diff --git a/tools/testing/selftests/net/mptcp/mptcp_lib.sh b/tools/testing/selftests/net/mptcp/mptcp_lib.sh index d62e653d48b0..f4388900016a 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_lib.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_lib.sh @@ -350,6 +350,27 @@ mptcp_lib_kill_wait() { wait "${1}" 2>/dev/null } +# $1: PID +mptcp_lib_pid_list_children() { + local curr="${1}" + # evoke 'ps' only once + local pids="${2:-"$(ps o pid,ppid)"}" + + echo "${curr}" + + local pid + for pid in $(echo "${pids}" | awk "\$2 == ${curr} { print \$1 }"); do + mptcp_lib_pid_list_children "${pid}" "${pids}" + done +} + +# $1: PID +mptcp_lib_kill_group_wait() { + # Some users might not have procps-ng: cannot use "kill -- -PID" + mptcp_lib_pid_list_children "${1}" | xargs -r kill &>/dev/null + wait "${1}" 2>/dev/null +} + # $1: IP address mptcp_lib_is_v6() { [ -z "${1##*:*}" ] -- cgit v1.2.3