From 2c4967f741e87cdd63de7271b97807041dccbf3b Mon Sep 17 00:00:00 2001 From: Sujit Reddy Thumma Date: Sat, 4 Feb 2012 16:14:50 -0500 Subject: mmc: core: Ensure clocks are always enabled before host interaction Ensure clocks are always enabled before any interaction with the host controller driver. This makes sure that there is no race between host execution and the core layer turning off clocks in different context with clock gating framework. Signed-off-by: Sujit Reddy Thumma Acked-by: Linus Walleij Acked-by: Per Forlin Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/linux/mmc/host.h') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 0beba1e5e1ed..73e5ee8e9ca2 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -444,4 +444,23 @@ static inline int mmc_boot_partition_access(struct mmc_host *host) return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC); } +#ifdef CONFIG_MMC_CLKGATE +void mmc_host_clk_hold(struct mmc_host *host); +void mmc_host_clk_release(struct mmc_host *host); +unsigned int mmc_host_clk_rate(struct mmc_host *host); + +#else +static inline void mmc_host_clk_hold(struct mmc_host *host) +{ +} + +static inline void mmc_host_clk_release(struct mmc_host *host) +{ +} + +static inline unsigned int mmc_host_clk_rate(struct mmc_host *host) +{ + return host->ios.clock; +} +#endif #endif /* LINUX_MMC_HOST_H */ -- cgit v1.2.3 From 6e8201f57c9359c9c5dc8f9805c15a4392492a10 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Mon, 16 Jan 2012 17:49:01 +0900 Subject: mmc: core: add the capability for broken voltage There is an understood mismatch between the voltage the host controller is set to and the voltage supplied to the card by a fixed voltage regulator. Teaching the driver to accept the mismatch is overly complicated. Instead just accept the regulator's voltage. This patch adds MMC_CAP2_BROKEN_VOLTAGE. If the voltage didn't satisfy between min_uV and max_uV, try to change the voltage in core.c. When changing the voltage, maybe use regulator_set_voltage(). In regulator_set_voltage(), check the below condition. /* sanity check */ if (!rdev->desc->ops->set_voltage && !rdev->desc->ops->set_voltage_sel) { ret = -EINVAL; goto out; } If some board should use the fixed-regulator, always return -EINVAL. Then, eMMC didn't initialize always. So if use a fixed-regulator, we need to add the MMC_CAP2_BROKEN_VOLTAGE. Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Acked-by: Adrian Hunter Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 4 ++++ include/linux/mmc/host.h | 1 + 2 files changed, 5 insertions(+) (limited to 'include/linux/mmc/host.h') diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index b3063b741df3..18661554e79c 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1131,6 +1131,10 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc, * might not allow this operation */ voltage = regulator_get_voltage(supply); + + if (mmc->caps2 & MMC_CAP2_BROKEN_VOLTAGE) + min_uV = max_uV = voltage; + if (voltage < 0) result = voltage; else if (voltage < min_uV || voltage > max_uV) diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 73e5ee8e9ca2..ee2b0363c040 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -257,6 +257,7 @@ struct mmc_host { #define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */ #define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \ MMC_CAP2_HS200_1_2V_SDR) +#define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */ mmc_pm_flag_t pm_caps; /* supported pm features */ unsigned int power_notify_type; -- cgit v1.2.3