From dddb342b5b9e482bb213aecc08cbdb201ea4f8da Mon Sep 17 00:00:00 2001 From: Weitao Wang Date: Sun, 23 Apr 2023 18:59:52 +0800 Subject: USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value OverCurrent condition is not standardized in the UHCI spec. Zhaoxin UHCI controllers report OverCurrent bit active off. In order to handle OverCurrent condition correctly, the uhci-hcd driver needs to be told to expect the active-off behavior. Suggested-by: Alan Stern Cc: stable@vger.kernel.org Signed-off-by: Weitao Wang Acked-by: Alan Stern Link: https://lore.kernel.org/r/20230423105952.4526-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-pci.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c index 3592f757fe05..7bd2fddde770 100644 --- a/drivers/usb/host/uhci-pci.c +++ b/drivers/usb/host/uhci-pci.c @@ -119,11 +119,13 @@ static int uhci_pci_init(struct usb_hcd *hcd) uhci->rh_numports = uhci_count_ports(hcd); - /* Intel controllers report the OverCurrent bit active on. - * VIA controllers report it active off, so we'll adjust the - * bit value. (It's not standardized in the UHCI spec.) + /* + * Intel controllers report the OverCurrent bit active on. VIA + * and ZHAOXIN controllers report it active off, so we'll adjust + * the bit value. (It's not standardized in the UHCI spec.) */ - if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA) + if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA || + to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_ZHAOXIN) uhci->oc_low = 1; /* HP's server management chip requires a longer port reset delay. */ -- cgit v1.2.3 From 2a821fc3136d5d99dcb9de152be8a052ca27d870 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Mon, 15 May 2023 16:40:58 +0300 Subject: xhci-pci: Only run d3cold avoidance quirk for s2idle Donghun reports that a notebook that has an AMD Ryzen 5700U but supports S3 has problems with USB after resuming from suspend. The issue was bisected down to commit d1658268e439 ("usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir"). As this issue only happens on S3, narrow the broken D3cold quirk to only run in s2idle. Fixes: d1658268e439 ("usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir") Reported-and-tested-by: Donghun Yoon Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20230515134059.161110-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 12 ++++++++++-- drivers/usb/host/xhci.h | 2 +- 2 files changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index ddb79f23fb3b..79b3691f373f 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "xhci.h" #include "xhci-trace.h" @@ -387,7 +388,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI) - xhci->quirks |= XHCI_BROKEN_D3COLD; + xhci->quirks |= XHCI_BROKEN_D3COLD_S2I; if (pdev->vendor == PCI_VENDOR_ID_INTEL) { xhci->quirks |= XHCI_LPM_SUPPORT; @@ -801,9 +802,16 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) * Systems with the TI redriver that loses port status change events * need to have the registers polled during D3, so avoid D3cold. */ - if (xhci->quirks & (XHCI_COMP_MODE_QUIRK | XHCI_BROKEN_D3COLD)) + if (xhci->quirks & XHCI_COMP_MODE_QUIRK) pci_d3cold_disable(pdev); +#ifdef CONFIG_SUSPEND + /* d3cold is broken, but only when s2idle is used */ + if (pm_suspend_target_state == PM_SUSPEND_TO_IDLE && + xhci->quirks & (XHCI_BROKEN_D3COLD_S2I)) + pci_d3cold_disable(pdev); +#endif + if (xhci->quirks & XHCI_PME_STUCK_QUIRK) xhci_pme_quirk(hcd); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 08d721921b7b..6b690ec91ff3 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1901,7 +1901,7 @@ struct xhci_hcd { #define XHCI_DISABLE_SPARSE BIT_ULL(38) #define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39) #define XHCI_NO_SOFT_RETRY BIT_ULL(40) -#define XHCI_BROKEN_D3COLD BIT_ULL(41) +#define XHCI_BROKEN_D3COLD_S2I BIT_ULL(41) #define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42) #define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43) #define XHCI_RESET_TO_DEFAULT BIT_ULL(44) -- cgit v1.2.3 From fe82f16aafdaf8002281d3b9524291d4a4a28460 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 15 May 2023 16:40:59 +0300 Subject: xhci: Fix incorrect tracking of free space on transfer rings This incorrect tracking caused unnecessary ring expansion in some usecases which over days of use consume a lot of memory. xhci driver tries to keep track of free transfer blocks (TRBs) on the ring buffer, but failed to add back some cancelled transfers that were turned into no-op operations instead of just moving past them. This can happen if there are several queued pending transfers which then are cancelled in reverse order. Solve this by counting the numer of steps we move the dequeue pointer once we complete a transfer, and add it to the number of free trbs instead of just adding the trb number of the current transfer. This way we ensure we count the no-op trbs on the way as well. Fixes: 55f6153d8cc8 ("xhci: remove extra loop in interrupt context") Cc: stable@vger.kernel.org Reported-by: Miller Hunter Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217242 Tested-by: Miller Hunter Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20230515134059.161110-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 1ad12d5a4857..2bc82b3a2f98 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -276,6 +276,26 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, trace_xhci_inc_enq(ring); } +static int xhci_num_trbs_to(struct xhci_segment *start_seg, union xhci_trb *start, + struct xhci_segment *end_seg, union xhci_trb *end, + unsigned int num_segs) +{ + union xhci_trb *last_on_seg; + int num = 0; + int i = 0; + + do { + if (start_seg == end_seg && end >= start) + return num + (end - start); + last_on_seg = &start_seg->trbs[TRBS_PER_SEGMENT - 1]; + num += last_on_seg - start; + start_seg = start_seg->next; + start = start_seg->trbs; + } while (i++ <= num_segs); + + return -EINVAL; +} + /* * Check to see if there's room to enqueue num_trbs on the ring and make sure * enqueue pointer will not advance into dequeue segment. See rules above. @@ -2140,6 +2160,7 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep, u32 trb_comp_code) { struct xhci_ep_ctx *ep_ctx; + int trbs_freed; ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep->ep_index); @@ -2209,9 +2230,15 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep, } /* Update ring dequeue pointer */ + trbs_freed = xhci_num_trbs_to(ep_ring->deq_seg, ep_ring->dequeue, + td->last_trb_seg, td->last_trb, + ep_ring->num_segs); + if (trbs_freed < 0) + xhci_dbg(xhci, "Failed to count freed trbs at TD finish\n"); + else + ep_ring->num_trbs_free += trbs_freed; ep_ring->dequeue = td->last_trb; ep_ring->deq_seg = td->last_trb_seg; - ep_ring->num_trbs_free += td->num_trbs - 1; inc_deq(xhci, ep_ring); return xhci_td_cleanup(xhci, td, ep_ring, td->status); -- cgit v1.2.3