From a8e8ffcc3afce2ee5fb70162aeaef3f03573ee1e Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Sun, 9 Feb 2025 13:05:50 +0200 Subject: mei: me: add panther lake P DID Add Panther Lake P device id. Cc: stable Co-developed-by: Tomas Winkler Signed-off-by: Tomas Winkler Signed-off-by: Alexander Usyskin Link: https://lore.kernel.org/r/20250209110550.1582982-1-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hw-me-regs.h | 2 ++ drivers/misc/mei/pci-me.c | 2 ++ 2 files changed, 4 insertions(+) (limited to 'drivers/misc') diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index c3a6657dcd4a..a5f88ec97df7 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -117,6 +117,8 @@ #define MEI_DEV_ID_LNL_M 0xA870 /* Lunar Lake Point M */ +#define MEI_DEV_ID_PTL_P 0xE470 /* Panther Lake P */ + /* * MEI HW Section */ diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 6589635f8ba3..d6ff9d82ae94 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -124,6 +124,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_LNL_M, MEI_ME_PCH15_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_PTL_P, MEI_ME_PCH15_CFG)}, + /* required last entry */ {0, } }; -- cgit v1.2.3 From fdb1ada57cf8b8752cdf54f08709d76d74999544 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 14 Feb 2025 22:24:25 +0100 Subject: mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO The _CRS ACPI resources table has 2 entries for the host wakeup GPIO, the first one being a regular GpioIo () resource while the second one is a GpioInt () resource for the same pin. The acpi_gpio_mapping table used by vsc-tp.c maps the first Gpio () resource to "wakeuphost-gpios" where as the second GpioInt () entry is mapped to "wakeuphostint-gpios". Using "wakeuphost" to request the GPIO as was done until now, means that the gpiolib-acpi code does not know that the GPIO is active-low as that info is only available in the GpioInt () entry. Things were still working before due to the following happening: 1. Since the 2 entries point to the same pin they share a struct gpio_desc 2. The SPI core creates the SPI device vsc-tp.c binds to and calls acpi_dev_gpio_irq_get(). This does use the second entry and sets FLAG_ACTIVE_LOW in gpio_desc.flags . 3. vsc_tp_probe() requests the "wakeuphost" GPIO and inherits the active-low flag set by acpi_dev_gpio_irq_get() But there is a possible scenario where things do not work: 1. - 3. happen as above 4. After requesting the "wakeuphost" GPIO, the "resetfw" GPIO is requested next, but its USB GPIO controller is not available yet, so this call returns -EPROBE_DEFER. 5. The gpio_desc for "wakeuphost" is put() and during this the active-low flag is cleared from gpio_desc.flags . 6. Later on vsc_tp_probe() requests the "wakeuphost" GPIO again, but now it is not marked active-low. The difference can also be seen in /sys/kernel/debug/gpio, which contains the following line for this GPIO: gpio-535 ( |wakeuphost ) in hi IRQ ACTIVE LOW If the second scenario is hit the "ACTIVE LOW" at the end disappears and things do not work. Fix this by requesting the GPIO through the "wakeuphostint" mapping instead which provides active-low info without relying on acpi_dev_gpio_irq_get() pre-populating this info in the gpio_desc. Link: https://bugzilla.redhat.com/show_bug.cgi?id=2316918 Signed-off-by: Hans de Goede Reviewed-by: Stanislaw Gruszka Tested-by: Sakari Ailus Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Cc: stable Link: https://lore.kernel.org/r/20250214212425.84021-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/vsc-tp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/misc') diff --git a/drivers/misc/mei/vsc-tp.c b/drivers/misc/mei/vsc-tp.c index 35d349fee769..7be1649b1972 100644 --- a/drivers/misc/mei/vsc-tp.c +++ b/drivers/misc/mei/vsc-tp.c @@ -502,7 +502,7 @@ static int vsc_tp_probe(struct spi_device *spi) if (ret) return ret; - tp->wakeuphost = devm_gpiod_get(dev, "wakeuphost", GPIOD_IN); + tp->wakeuphost = devm_gpiod_get(dev, "wakeuphostint", GPIOD_IN); if (IS_ERR(tp->wakeuphost)) return PTR_ERR(tp->wakeuphost); -- cgit v1.2.3 From fa2e55811ae25020a5e9b23a8932e67e6d6261a4 Mon Sep 17 00:00:00 2001 From: Mike Lothian Date: Fri, 14 Feb 2025 12:28:00 +0000 Subject: ntsync: Set the permissions to be 0666 This allows ntsync to be usuable by non-root processes out of the box Signed-off-by: Mike Lothian Reviewed-by: Elizabeth Figura Link: https://lore.kernel.org/r/20250214122759.2629-2-mike@fireburn.co.uk Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ntsync.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/misc') diff --git a/drivers/misc/ntsync.c b/drivers/misc/ntsync.c index 055395cde42b..0b4e56d59b3d 100644 --- a/drivers/misc/ntsync.c +++ b/drivers/misc/ntsync.c @@ -1208,6 +1208,7 @@ static struct miscdevice ntsync_misc = { .minor = MISC_DYNAMIC_MINOR, .name = NTSYNC_NAME, .fops = &ntsync_fops, + .mode = 0666, }; module_misc_device(ntsync_misc); -- cgit v1.2.3 From 038ef0754aae76f79b147b8867f9250e6a976872 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 7 Feb 2025 00:03:11 +0200 Subject: eeprom: digsy_mtc: Make GPIO lookup table match the device The dev_id value in the GPIO lookup table must match to the device instance name, which in this case is combined of name and platform device ID, i.e. "spi_gpio.1". But the table assumed that there was no platform device ID defined, which is wrong. Fix the dev_id value accordingly. Fixes: 9b00bc7b901f ("spi: spi-gpio: Rewrite to use GPIO descriptors") Cc: stable Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20250206220311.1554075-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/eeprom/digsy_mtc_eeprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/misc') diff --git a/drivers/misc/eeprom/digsy_mtc_eeprom.c b/drivers/misc/eeprom/digsy_mtc_eeprom.c index 88888485e6f8..ee58f7ce5bfa 100644 --- a/drivers/misc/eeprom/digsy_mtc_eeprom.c +++ b/drivers/misc/eeprom/digsy_mtc_eeprom.c @@ -50,7 +50,7 @@ static struct platform_device digsy_mtc_eeprom = { }; static struct gpiod_lookup_table eeprom_spi_gpiod_table = { - .dev_id = "spi_gpio", + .dev_id = "spi_gpio.1", .table = { GPIO_LOOKUP("gpio@b00", GPIO_EEPROM_CLK, "sck", GPIO_ACTIVE_HIGH), -- cgit v1.2.3 From 92527e473911b835c2c18b0c55c337c33e85ff00 Mon Sep 17 00:00:00 2001 From: Elizabeth Figura Date: Thu, 20 Feb 2025 13:23:34 -0600 Subject: ntsync: Check wait count based on byte size. GCC versions below 13 incorrectly detect the copy size as being static and too small to fit in the "fds" array. Work around this by explicitly calculating the size and returning EINVAL based on that, instead of based on the object count. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202502072019.LYoCR9bF-lkp@intel.com/ Suggested-by: Arnd Bergmann Signed-off-by: Elizabeth Figura -- Suggested-by as per Arnd's request, but the only thing I changed was preserving array_size() [as noted by Geert in the linked thread]. I tested and found no regressions. v2: Add missing sign-off Link: https://lore.kernel.org/r/20250220192334.549167-1-zfigura@codeweavers.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ntsync.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/misc') diff --git a/drivers/misc/ntsync.c b/drivers/misc/ntsync.c index 0b4e56d59b3d..999026a1ae04 100644 --- a/drivers/misc/ntsync.c +++ b/drivers/misc/ntsync.c @@ -873,6 +873,7 @@ static int setup_wait(struct ntsync_device *dev, { int fds[NTSYNC_MAX_WAIT_COUNT + 1]; const __u32 count = args->count; + size_t size = array_size(count, sizeof(fds[0])); struct ntsync_q *q; __u32 total_count; __u32 i, j; @@ -880,15 +881,14 @@ static int setup_wait(struct ntsync_device *dev, if (args->pad || (args->flags & ~NTSYNC_WAIT_REALTIME)) return -EINVAL; - if (args->count > NTSYNC_MAX_WAIT_COUNT) + if (size >= sizeof(fds)) return -EINVAL; total_count = count; if (args->alert) total_count++; - if (copy_from_user(fds, u64_to_user_ptr(args->objs), - array_size(count, sizeof(*fds)))) + if (copy_from_user(fds, u64_to_user_ptr(args->objs), size)) return -EFAULT; if (args->alert) fds[count] = args->alert; -- cgit v1.2.3 From 2397d61ee45cddb8f3bd3a3a9840ef0f0b5aa843 Mon Sep 17 00:00:00 2001 From: Christian Heusel Date: Mon, 24 Feb 2025 09:32:59 +0100 Subject: Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection" This reverts commit 235b630eda072d7e7b102ab346d6b8a2c028a772. This commit was found responsible for issues with SD card recognition, as users had to re-insert their cards in the readers and wait for a while. As for some people the SD card was involved in the boot process it also caused boot failures. Cc: stable@vger.kernel.org Link: https://bbs.archlinux.org/viewtopic.php?id=303321 Fixes: 235b630eda07 ("drivers/card_reader/rtsx_usb: Restore interrupt based detection") Reported-by: qf Closes: https://lore.kernel.org/all/1de87dfa-1e81-45b7-8dcb-ad86c21d5352@heusel.eu Signed-off-by: Christian Heusel Link: https://lore.kernel.org/r/20250224-revert-sdcard-patch-v1-1-d1a457fbb796@heusel.eu Signed-off-by: Greg Kroah-Hartman --- drivers/misc/cardreader/rtsx_usb.c | 15 --------------- 1 file changed, 15 deletions(-) (limited to 'drivers/misc') diff --git a/drivers/misc/cardreader/rtsx_usb.c b/drivers/misc/cardreader/rtsx_usb.c index e0174da5e9fc..77b0490a1b38 100644 --- a/drivers/misc/cardreader/rtsx_usb.c +++ b/drivers/misc/cardreader/rtsx_usb.c @@ -286,7 +286,6 @@ static int rtsx_usb_get_status_with_bulk(struct rtsx_ucr *ucr, u16 *status) int rtsx_usb_get_card_status(struct rtsx_ucr *ucr, u16 *status) { int ret; - u8 interrupt_val = 0; u16 *buf; if (!status) @@ -309,20 +308,6 @@ int rtsx_usb_get_card_status(struct rtsx_ucr *ucr, u16 *status) ret = rtsx_usb_get_status_with_bulk(ucr, status); } - rtsx_usb_read_register(ucr, CARD_INT_PEND, &interrupt_val); - /* Cross check presence with interrupts */ - if (*status & XD_CD) - if (!(interrupt_val & XD_INT)) - *status &= ~XD_CD; - - if (*status & SD_CD) - if (!(interrupt_val & SD_INT)) - *status &= ~SD_CD; - - if (*status & MS_CD) - if (!(interrupt_val & MS_INT)) - *status &= ~MS_CD; - /* usb_control_msg may return positive when success */ if (ret < 0) return ret; -- cgit v1.2.3