From b1b3ced389795d2671e88dd3e9e07a48dc9632fc Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Wed, 10 Mar 2021 10:06:05 +0200 Subject: mfd: Support ROHM BD9576MUF and BD9573MUF Add core support for ROHM BD9576MUF and BD9573MUF PMICs which are mainly used to power the R-Car series processors. Signed-off-by: Matti Vaittinen Signed-off-by: Lee Jones --- drivers/mfd/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/mfd/Makefile') diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 834f5463af28..d93f6f361fd3 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -261,6 +261,7 @@ obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o obj-$(CONFIG_MFD_ROHM_BD70528) += rohm-bd70528.o obj-$(CONFIG_MFD_ROHM_BD71828) += rohm-bd71828.o obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o +obj-$(CONFIG_MFD_ROHM_BD957XMUF) += rohm-bd9576.o obj-$(CONFIG_MFD_STMFX) += stmfx.o obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o -- cgit v1.2.3 From eceae583930666a69ab805eee8e81f9699bf6930 Mon Sep 17 00:00:00 2001 From: Jonathan Neuschäfer Date: Sun, 24 Jan 2021 22:41:23 +0100 Subject: mfd: Add base driver for Netronix embedded controller MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Netronix embedded controller is a microcontroller found in some e-book readers designed by the original design manufacturer Netronix, Inc. It contains RTC, battery monitoring, system power management, and PWM functionality. This driver implements register access and version detection. Third-party hardware documentation is available at: https://github.com/neuschaefer/linux/wiki/Netronix-MSP430-embedded-controller The EC supports interrupts, but the driver doesn't make use of them so far. Signed-off-by: Jonathan Neuschäfer Signed-off-by: Lee Jones --- drivers/mfd/Kconfig | 11 +++ drivers/mfd/Makefile | 1 + drivers/mfd/ntxec.c | 221 ++++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/ntxec.h | 37 ++++++++ 4 files changed, 270 insertions(+) create mode 100644 drivers/mfd/ntxec.c create mode 100644 include/linux/mfd/ntxec.h (limited to 'drivers/mfd/Makefile') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b74efa469e90..a03de3f7a8ed 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -967,6 +967,17 @@ config MFD_VIPERBOARD You need to select the mfd cell drivers separately. The drivers do not support all features the board exposes. +config MFD_NTXEC + tristate "Netronix embedded controller (EC)" + depends on OF || COMPILE_TEST + depends on I2C + select REGMAP_I2C + select MFD_CORE + help + Say yes here if you want to support the embedded controller found in + certain e-book readers designed by the original design manufacturer + Netronix. + config MFD_RETU tristate "Nokia Retu and Tahvo multi-function device" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 834f5463af28..bb5e8f2a8e3a 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -218,6 +218,7 @@ obj-$(CONFIG_MFD_INTEL_PMC_BXT) += intel_pmc_bxt.o obj-$(CONFIG_MFD_INTEL_PMT) += intel_pmt.o obj-$(CONFIG_MFD_PALMAS) += palmas.o obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o +obj-$(CONFIG_MFD_NTXEC) += ntxec.o obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o obj-$(CONFIG_MFD_RK808) += rk808.o obj-$(CONFIG_MFD_RN5T618) += rn5t618.o diff --git a/drivers/mfd/ntxec.c b/drivers/mfd/ntxec.c new file mode 100644 index 000000000000..957de2b03529 --- /dev/null +++ b/drivers/mfd/ntxec.c @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * The Netronix embedded controller is a microcontroller found in some + * e-book readers designed by the original design manufacturer Netronix, Inc. + * It contains RTC, battery monitoring, system power management, and PWM + * functionality. + * + * This driver implements register access, version detection, and system + * power-off/reset. + * + * Copyright 2020 Jonathan Neuschäfer + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define NTXEC_REG_VERSION 0x00 +#define NTXEC_REG_POWEROFF 0x50 +#define NTXEC_REG_POWERKEEP 0x70 +#define NTXEC_REG_RESET 0x90 + +#define NTXEC_POWEROFF_VALUE 0x0100 +#define NTXEC_POWERKEEP_VALUE 0x0800 +#define NTXEC_RESET_VALUE 0xff00 + +static struct i2c_client *poweroff_restart_client; + +static void ntxec_poweroff(void) +{ + int res; + u8 buf[3] = { NTXEC_REG_POWEROFF }; + struct i2c_msg msgs[] = { + { + .addr = poweroff_restart_client->addr, + .flags = 0, + .len = sizeof(buf), + .buf = buf, + }, + }; + + put_unaligned_be16(NTXEC_POWEROFF_VALUE, buf + 1); + + res = i2c_transfer(poweroff_restart_client->adapter, msgs, ARRAY_SIZE(msgs)); + if (res < 0) + dev_warn(&poweroff_restart_client->dev, + "Failed to power off (err = %d)\n", res); + + /* + * The time from the register write until the host CPU is powered off + * has been observed to be about 2.5 to 3 seconds. Sleep long enough to + * safely avoid returning from the poweroff handler. + */ + msleep(5000); +} + +static int ntxec_restart(struct notifier_block *nb, + unsigned long action, void *data) +{ + int res; + u8 buf[3] = { NTXEC_REG_RESET }; + /* + * NOTE: The lower half of the reset value is not sent, because sending + * it causes an I2C error. (The reset handler in the downstream driver + * does send the full two-byte value, but doesn't check the result). + */ + struct i2c_msg msgs[] = { + { + .addr = poweroff_restart_client->addr, + .flags = 0, + .len = sizeof(buf) - 1, + .buf = buf, + }, + }; + + put_unaligned_be16(NTXEC_RESET_VALUE, buf + 1); + + res = i2c_transfer(poweroff_restart_client->adapter, msgs, ARRAY_SIZE(msgs)); + if (res < 0) + dev_warn(&poweroff_restart_client->dev, + "Failed to restart (err = %d)\n", res); + + return NOTIFY_DONE; +} + +static struct notifier_block ntxec_restart_handler = { + .notifier_call = ntxec_restart, + .priority = 128, +}; + +static const struct regmap_config regmap_config = { + .name = "ntxec", + .reg_bits = 8, + .val_bits = 16, + .cache_type = REGCACHE_NONE, + .val_format_endian = REGMAP_ENDIAN_BIG, +}; + +static const struct mfd_cell ntxec_subdevices[] = { + { .name = "ntxec-rtc" }, + { .name = "ntxec-pwm" }, +}; + +static int ntxec_probe(struct i2c_client *client) +{ + struct ntxec *ec; + unsigned int version; + int res; + + ec = devm_kmalloc(&client->dev, sizeof(*ec), GFP_KERNEL); + if (!ec) + return -ENOMEM; + + ec->dev = &client->dev; + + ec->regmap = devm_regmap_init_i2c(client, ®map_config); + if (IS_ERR(ec->regmap)) { + dev_err(ec->dev, "Failed to set up regmap for device\n"); + return PTR_ERR(ec->regmap); + } + + /* Determine the firmware version */ + res = regmap_read(ec->regmap, NTXEC_REG_VERSION, &version); + if (res < 0) { + dev_err(ec->dev, "Failed to read firmware version number\n"); + return res; + } + + /* Bail out if we encounter an unknown firmware version */ + switch (version) { + case NTXEC_VERSION_KOBO_AURA: + break; + default: + dev_err(ec->dev, + "Netronix embedded controller version %04x is not supported.\n", + version); + return -ENODEV; + } + + dev_info(ec->dev, + "Netronix embedded controller version %04x detected.\n", version); + + if (of_device_is_system_power_controller(ec->dev->of_node)) { + /* + * Set the 'powerkeep' bit. This is necessary on some boards + * in order to keep the system running. + */ + res = regmap_write(ec->regmap, NTXEC_REG_POWERKEEP, + NTXEC_POWERKEEP_VALUE); + if (res < 0) + return res; + + if (poweroff_restart_client) + /* + * Another instance of the driver already took + * poweroff/restart duties. + */ + dev_err(ec->dev, "poweroff_restart_client already assigned\n"); + else + poweroff_restart_client = client; + + if (pm_power_off) + /* Another driver already registered a poweroff handler. */ + dev_err(ec->dev, "pm_power_off already assigned\n"); + else + pm_power_off = ntxec_poweroff; + + res = register_restart_handler(&ntxec_restart_handler); + if (res) + dev_err(ec->dev, + "Failed to register restart handler: %d\n", res); + } + + i2c_set_clientdata(client, ec); + + res = devm_mfd_add_devices(ec->dev, PLATFORM_DEVID_NONE, ntxec_subdevices, + ARRAY_SIZE(ntxec_subdevices), NULL, 0, NULL); + if (res) + dev_err(ec->dev, "Failed to add subdevices: %d\n", res); + + return res; +} + +static int ntxec_remove(struct i2c_client *client) +{ + if (client == poweroff_restart_client) { + poweroff_restart_client = NULL; + pm_power_off = NULL; + unregister_restart_handler(&ntxec_restart_handler); + } + + return 0; +} + +static const struct of_device_id of_ntxec_match_table[] = { + { .compatible = "netronix,ntxec", }, + {} +}; +MODULE_DEVICE_TABLE(of, of_ntxec_match_table); + +static struct i2c_driver ntxec_driver = { + .driver = { + .name = "ntxec", + .of_match_table = of_ntxec_match_table, + }, + .probe_new = ntxec_probe, + .remove = ntxec_remove, +}; +module_i2c_driver(ntxec_driver); + +MODULE_AUTHOR("Jonathan Neuschäfer "); +MODULE_DESCRIPTION("Core driver for Netronix EC"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/ntxec.h b/include/linux/mfd/ntxec.h new file mode 100644 index 000000000000..361204d125f1 --- /dev/null +++ b/include/linux/mfd/ntxec.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2020 Jonathan Neuschäfer + * + * Register access and version information for the Netronix embedded + * controller. + */ + +#ifndef NTXEC_H +#define NTXEC_H + +#include + +struct device; +struct regmap; + +struct ntxec { + struct device *dev; + struct regmap *regmap; +}; + +/* + * Some registers, such as the battery status register (0x41), are in + * big-endian, but others only have eight significant bits, which are in the + * first byte transmitted over I2C (the MSB of the big-endian value). + * This convenience function converts an 8-bit value to 16-bit for use in the + * second kind of register. + */ +static inline __be16 ntxec_reg8(u8 value) +{ + return value << 8; +} + +/* Known firmware versions */ +#define NTXEC_VERSION_KOBO_AURA 0xd726 /* found in Kobo Aura */ + +#endif -- cgit v1.2.3 From f7cb7fe34db9f32e8b1c13ecc823112480b875f8 Mon Sep 17 00:00:00 2001 From: Cristian Ciocaltea Date: Tue, 26 Jan 2021 11:55:59 +0200 Subject: mfd: Add MFD driver for ATC260x PMICs Add initial support for the Actions Semi ATC260x PMICs which integrates Audio Codec, Power management, Clock generation and GPIO controller blocks. For the moment this driver only supports Regulator, Poweroff and Onkey functionalities for the ATC2603C and ATC2609A chip variants. Since the PMICs can be accessed using both I2C and SPI buses, the following driver structure has been adopted: -----> atc260x-core.c (Implements core functionalities) / ATC260x --------> atc260x-i2c.c (Implements I2C interface) \ -----> atc260x-spi.c (Implements SPI interface - TODO) Co-developed-by: Manivannan Sadhasivam Signed-off-by: Manivannan Sadhasivam Signed-off-by: Cristian Ciocaltea Signed-off-by: Lee Jones --- drivers/mfd/Kconfig | 18 ++ drivers/mfd/Makefile | 3 + drivers/mfd/atc260x-core.c | 310 +++++++++++++++++++++++++++++++++++ drivers/mfd/atc260x-i2c.c | 64 ++++++++ include/linux/mfd/atc260x/atc2603c.h | 281 +++++++++++++++++++++++++++++++ include/linux/mfd/atc260x/atc2609a.h | 308 ++++++++++++++++++++++++++++++++++ include/linux/mfd/atc260x/core.h | 58 +++++++ 7 files changed, 1042 insertions(+) create mode 100644 drivers/mfd/atc260x-core.c create mode 100644 drivers/mfd/atc260x-i2c.c create mode 100644 include/linux/mfd/atc260x/atc2603c.h create mode 100644 include/linux/mfd/atc260x/atc2609a.h create mode 100644 include/linux/mfd/atc260x/core.h (limited to 'drivers/mfd/Makefile') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b74efa469e90..f9b43f15790b 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2055,6 +2055,24 @@ config MFD_WCD934X This driver provides common support WCD934x audio codec and its associated Pin Controller, Soundwire Controller and Audio codec. +config MFD_ATC260X + tristate + select MFD_CORE + select REGMAP + select REGMAP_IRQ + +config MFD_ATC260X_I2C + tristate "Actions Semi ATC260x PMICs with I2C" + select MFD_ATC260X + select REGMAP_I2C + depends on I2C + help + Support for the Actions Semi ATC260x PMICs controlled via I2C. + + This driver provides common support for accessing the ATC2603C + and ATC2609A chip variants, additional drivers must be enabled + in order to use the functionality of the device. + config MFD_KHADAS_MCU tristate "Support for Khadas System control Microcontroller" depends on I2C diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 834f5463af28..f7872d0bd570 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -268,3 +268,6 @@ obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o + +obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o +obj-$(CONFIG_MFD_ATC260X_I2C) += atc260x-i2c.o diff --git a/drivers/mfd/atc260x-core.c b/drivers/mfd/atc260x-core.c new file mode 100644 index 000000000000..7148ff5b05b1 --- /dev/null +++ b/drivers/mfd/atc260x-core.c @@ -0,0 +1,310 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Core support for ATC260x PMICs + * + * Copyright (C) 2019 Manivannan Sadhasivam + * Copyright (C) 2020 Cristian Ciocaltea + */ + +#include +#include +#include +#include +#include +#include +#include + +#define ATC260X_CHIP_REV_MAX 31 + +struct atc260x_init_regs { + unsigned int cmu_devrst; + unsigned int cmu_devrst_ints; + unsigned int ints_msk; + unsigned int pad_en; + unsigned int pad_en_extirq; +}; + +static void regmap_lock_mutex(void *__mutex) +{ + struct mutex *mutex = __mutex; + + /* + * Using regmap within an atomic context (e.g. accessing a PMIC when + * powering system down) is normally allowed only if the regmap type + * is MMIO and the regcache type is either REGCACHE_NONE or + * REGCACHE_FLAT. For slow buses like I2C and SPI, the regmap is + * internally protected by a mutex which is acquired non-atomically. + * + * Let's improve this by using a customized locking scheme inspired + * from I2C atomic transfer. See i2c_in_atomic_xfer_mode() for a + * starting point. + */ + if (system_state > SYSTEM_RUNNING && irqs_disabled()) + mutex_trylock(mutex); + else + mutex_lock(mutex); +} + +static void regmap_unlock_mutex(void *__mutex) +{ + struct mutex *mutex = __mutex; + + mutex_unlock(mutex); +} + +static const struct regmap_config atc2603c_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = ATC2603C_SADDR, + .cache_type = REGCACHE_NONE, +}; + +static const struct regmap_config atc2609a_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = ATC2609A_SADDR, + .cache_type = REGCACHE_NONE, +}; + +static const struct regmap_irq atc2603c_regmap_irqs[] = { + REGMAP_IRQ_REG(ATC2603C_IRQ_AUDIO, 0, ATC2603C_INTS_MSK_AUDIO), + REGMAP_IRQ_REG(ATC2603C_IRQ_OV, 0, ATC2603C_INTS_MSK_OV), + REGMAP_IRQ_REG(ATC2603C_IRQ_OC, 0, ATC2603C_INTS_MSK_OC), + REGMAP_IRQ_REG(ATC2603C_IRQ_OT, 0, ATC2603C_INTS_MSK_OT), + REGMAP_IRQ_REG(ATC2603C_IRQ_UV, 0, ATC2603C_INTS_MSK_UV), + REGMAP_IRQ_REG(ATC2603C_IRQ_ALARM, 0, ATC2603C_INTS_MSK_ALARM), + REGMAP_IRQ_REG(ATC2603C_IRQ_ONOFF, 0, ATC2603C_INTS_MSK_ONOFF), + REGMAP_IRQ_REG(ATC2603C_IRQ_SGPIO, 0, ATC2603C_INTS_MSK_SGPIO), + REGMAP_IRQ_REG(ATC2603C_IRQ_IR, 0, ATC2603C_INTS_MSK_IR), + REGMAP_IRQ_REG(ATC2603C_IRQ_REMCON, 0, ATC2603C_INTS_MSK_REMCON), + REGMAP_IRQ_REG(ATC2603C_IRQ_POWER_IN, 0, ATC2603C_INTS_MSK_POWERIN), +}; + +static const struct regmap_irq atc2609a_regmap_irqs[] = { + REGMAP_IRQ_REG(ATC2609A_IRQ_AUDIO, 0, ATC2609A_INTS_MSK_AUDIO), + REGMAP_IRQ_REG(ATC2609A_IRQ_OV, 0, ATC2609A_INTS_MSK_OV), + REGMAP_IRQ_REG(ATC2609A_IRQ_OC, 0, ATC2609A_INTS_MSK_OC), + REGMAP_IRQ_REG(ATC2609A_IRQ_OT, 0, ATC2609A_INTS_MSK_OT), + REGMAP_IRQ_REG(ATC2609A_IRQ_UV, 0, ATC2609A_INTS_MSK_UV), + REGMAP_IRQ_REG(ATC2609A_IRQ_ALARM, 0, ATC2609A_INTS_MSK_ALARM), + REGMAP_IRQ_REG(ATC2609A_IRQ_ONOFF, 0, ATC2609A_INTS_MSK_ONOFF), + REGMAP_IRQ_REG(ATC2609A_IRQ_WKUP, 0, ATC2609A_INTS_MSK_WKUP), + REGMAP_IRQ_REG(ATC2609A_IRQ_IR, 0, ATC2609A_INTS_MSK_IR), + REGMAP_IRQ_REG(ATC2609A_IRQ_REMCON, 0, ATC2609A_INTS_MSK_REMCON), + REGMAP_IRQ_REG(ATC2609A_IRQ_POWER_IN, 0, ATC2609A_INTS_MSK_POWERIN), +}; + +static const struct regmap_irq_chip atc2603c_regmap_irq_chip = { + .name = "atc2603c", + .irqs = atc2603c_regmap_irqs, + .num_irqs = ARRAY_SIZE(atc2603c_regmap_irqs), + .num_regs = 1, + .status_base = ATC2603C_INTS_PD, + .mask_base = ATC2603C_INTS_MSK, + .mask_invert = true, +}; + +static const struct regmap_irq_chip atc2609a_regmap_irq_chip = { + .name = "atc2609a", + .irqs = atc2609a_regmap_irqs, + .num_irqs = ARRAY_SIZE(atc2609a_regmap_irqs), + .num_regs = 1, + .status_base = ATC2609A_INTS_PD, + .mask_base = ATC2609A_INTS_MSK, + .mask_invert = true, +}; + +static const struct resource atc2603c_onkey_resources[] = { + DEFINE_RES_IRQ(ATC2603C_IRQ_ONOFF), +}; + +static const struct resource atc2609a_onkey_resources[] = { + DEFINE_RES_IRQ(ATC2609A_IRQ_ONOFF), +}; + +static const struct mfd_cell atc2603c_mfd_cells[] = { + { .name = "atc260x-regulator" }, + { .name = "atc260x-pwrc" }, + { + .name = "atc260x-onkey", + .num_resources = ARRAY_SIZE(atc2603c_onkey_resources), + .resources = atc2603c_onkey_resources, + }, +}; + +static const struct mfd_cell atc2609a_mfd_cells[] = { + { .name = "atc260x-regulator" }, + { .name = "atc260x-pwrc" }, + { + .name = "atc260x-onkey", + .num_resources = ARRAY_SIZE(atc2609a_onkey_resources), + .resources = atc2609a_onkey_resources, + }, +}; + +static const struct atc260x_init_regs atc2603c_init_regs = { + .cmu_devrst = ATC2603C_CMU_DEVRST, + .cmu_devrst_ints = ATC2603C_CMU_DEVRST_INTS, + .ints_msk = ATC2603C_INTS_MSK, + .pad_en = ATC2603C_PAD_EN, + .pad_en_extirq = ATC2603C_PAD_EN_EXTIRQ, +}; + +static const struct atc260x_init_regs atc2609a_init_regs = { + .cmu_devrst = ATC2609A_CMU_DEVRST, + .cmu_devrst_ints = ATC2609A_CMU_DEVRST_INTS, + .ints_msk = ATC2609A_INTS_MSK, + .pad_en = ATC2609A_PAD_EN, + .pad_en_extirq = ATC2609A_PAD_EN_EXTIRQ, +}; + +static void atc260x_cmu_reset(struct atc260x *atc260x) +{ + const struct atc260x_init_regs *regs = atc260x->init_regs; + + /* Assert reset */ + regmap_update_bits(atc260x->regmap, regs->cmu_devrst, + regs->cmu_devrst_ints, ~regs->cmu_devrst_ints); + + /* De-assert reset */ + regmap_update_bits(atc260x->regmap, regs->cmu_devrst, + regs->cmu_devrst_ints, regs->cmu_devrst_ints); +} + +static void atc260x_dev_init(struct atc260x *atc260x) +{ + const struct atc260x_init_regs *regs = atc260x->init_regs; + + /* Initialize interrupt block */ + atc260x_cmu_reset(atc260x); + + /* Disable all interrupt sources */ + regmap_write(atc260x->regmap, regs->ints_msk, 0); + + /* Enable EXTIRQ pad */ + regmap_update_bits(atc260x->regmap, regs->pad_en, + regs->pad_en_extirq, regs->pad_en_extirq); +} + +/** + * atc260x_match_device(): Setup ATC260x variant related fields + * + * @atc260x: ATC260x device to setup (.dev field must be set) + * @regmap_cfg: regmap config associated with this ATC260x device + * + * This lets the ATC260x core configure the MFD cells and register maps + * for later use. + */ +int atc260x_match_device(struct atc260x *atc260x, struct regmap_config *regmap_cfg) +{ + struct device *dev = atc260x->dev; + const void *of_data; + + of_data = of_device_get_match_data(dev); + if (!of_data) + return -ENODEV; + + atc260x->ic_type = (unsigned long)of_data; + + switch (atc260x->ic_type) { + case ATC2603C: + *regmap_cfg = atc2603c_regmap_config; + atc260x->regmap_irq_chip = &atc2603c_regmap_irq_chip; + atc260x->cells = atc2603c_mfd_cells; + atc260x->nr_cells = ARRAY_SIZE(atc2603c_mfd_cells); + atc260x->type_name = "atc2603c"; + atc260x->rev_reg = ATC2603C_CHIP_VER; + atc260x->init_regs = &atc2603c_init_regs; + break; + case ATC2609A: + *regmap_cfg = atc2609a_regmap_config; + atc260x->regmap_irq_chip = &atc2609a_regmap_irq_chip; + atc260x->cells = atc2609a_mfd_cells; + atc260x->nr_cells = ARRAY_SIZE(atc2609a_mfd_cells); + atc260x->type_name = "atc2609a"; + atc260x->rev_reg = ATC2609A_CHIP_VER; + atc260x->init_regs = &atc2609a_init_regs; + break; + default: + dev_err(dev, "Unsupported ATC260x device type: %u\n", + atc260x->ic_type); + return -EINVAL; + } + + atc260x->regmap_mutex = devm_kzalloc(dev, sizeof(*atc260x->regmap_mutex), + GFP_KERNEL); + if (!atc260x->regmap_mutex) + return -ENOMEM; + + mutex_init(atc260x->regmap_mutex); + + regmap_cfg->lock = regmap_lock_mutex, + regmap_cfg->unlock = regmap_unlock_mutex, + regmap_cfg->lock_arg = atc260x->regmap_mutex; + + return 0; +} +EXPORT_SYMBOL_GPL(atc260x_match_device); + +/** + * atc260x_device_probe(): Probe a configured ATC260x device + * + * @atc260x: ATC260x device to probe (must be configured) + * + * This function lets the ATC260x core register the ATC260x MFD devices + * and IRQCHIP. The ATC260x device passed in must be fully configured + * with atc260x_match_device, its IRQ set, and regmap created. + */ +int atc260x_device_probe(struct atc260x *atc260x) +{ + struct device *dev = atc260x->dev; + unsigned int chip_rev; + int ret; + + if (!atc260x->irq) { + dev_err(dev, "No interrupt support\n"); + return -EINVAL; + } + + /* Initialize the hardware */ + atc260x_dev_init(atc260x); + + ret = regmap_read(atc260x->regmap, atc260x->rev_reg, &chip_rev); + if (ret) { + dev_err(dev, "Failed to get chip revision\n"); + return ret; + } + + if (chip_rev > ATC260X_CHIP_REV_MAX) { + dev_err(dev, "Unknown chip revision: %u\n", chip_rev); + return -EINVAL; + } + + atc260x->ic_ver = __ffs(chip_rev + 1U); + + dev_info(dev, "Detected chip type %s rev.%c\n", + atc260x->type_name, 'A' + atc260x->ic_ver); + + ret = devm_regmap_add_irq_chip(dev, atc260x->regmap, atc260x->irq, IRQF_ONESHOT, + -1, atc260x->regmap_irq_chip, &atc260x->irq_data); + if (ret) { + dev_err(dev, "Failed to add IRQ chip: %d\n", ret); + return ret; + } + + ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + atc260x->cells, atc260x->nr_cells, NULL, 0, + regmap_irq_get_domain(atc260x->irq_data)); + if (ret) { + dev_err(dev, "Failed to add child devices: %d\n", ret); + regmap_del_irq_chip(atc260x->irq, atc260x->irq_data); + } + + return ret; +} +EXPORT_SYMBOL_GPL(atc260x_device_probe); + +MODULE_DESCRIPTION("ATC260x PMICs Core support"); +MODULE_AUTHOR("Manivannan Sadhasivam "); +MODULE_AUTHOR("Cristian Ciocaltea "); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/atc260x-i2c.c b/drivers/mfd/atc260x-i2c.c new file mode 100644 index 000000000000..362005703367 --- /dev/null +++ b/drivers/mfd/atc260x-i2c.c @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * I2C bus interface for ATC260x PMICs + * + * Copyright (C) 2019 Manivannan Sadhasivam + * Copyright (C) 2020 Cristian Ciocaltea + */ + +#include +#include +#include +#include +#include + +static int atc260x_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct atc260x *atc260x; + struct regmap_config regmap_cfg; + int ret; + + atc260x = devm_kzalloc(&client->dev, sizeof(*atc260x), GFP_KERNEL); + if (!atc260x) + return -ENOMEM; + + atc260x->dev = &client->dev; + atc260x->irq = client->irq; + + ret = atc260x_match_device(atc260x, ®map_cfg); + if (ret) + return ret; + + i2c_set_clientdata(client, atc260x); + + atc260x->regmap = devm_regmap_init_i2c(client, ®map_cfg); + if (IS_ERR(atc260x->regmap)) { + ret = PTR_ERR(atc260x->regmap); + dev_err(&client->dev, "failed to init regmap: %d\n", ret); + return ret; + } + + return atc260x_device_probe(atc260x); +} + +const struct of_device_id atc260x_i2c_of_match[] = { + { .compatible = "actions,atc2603c", .data = (void *)ATC2603C }, + { .compatible = "actions,atc2609a", .data = (void *)ATC2609A }, + { } +}; +MODULE_DEVICE_TABLE(of, atc260x_i2c_of_match); + +static struct i2c_driver atc260x_i2c_driver = { + .driver = { + .name = "atc260x", + .of_match_table = of_match_ptr(atc260x_i2c_of_match), + }, + .probe = atc260x_i2c_probe, +}; +module_i2c_driver(atc260x_i2c_driver); + +MODULE_DESCRIPTION("ATC260x PMICs I2C bus interface"); +MODULE_AUTHOR("Manivannan Sadhasivam "); +MODULE_AUTHOR("Cristian Ciocaltea "); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/atc260x/atc2603c.h b/include/linux/mfd/atc260x/atc2603c.h new file mode 100644 index 000000000000..07ac640ef3e1 --- /dev/null +++ b/include/linux/mfd/atc260x/atc2603c.h @@ -0,0 +1,281 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * ATC2603C PMIC register definitions + * + * Copyright (C) 2020 Cristian Ciocaltea + */ + +#ifndef __LINUX_MFD_ATC260X_ATC2603C_H +#define __LINUX_MFD_ATC260X_ATC2603C_H + +enum atc2603c_irq_def { + ATC2603C_IRQ_AUDIO = 0, + ATC2603C_IRQ_OV, + ATC2603C_IRQ_OC, + ATC2603C_IRQ_OT, + ATC2603C_IRQ_UV, + ATC2603C_IRQ_ALARM, + ATC2603C_IRQ_ONOFF, + ATC2603C_IRQ_SGPIO, + ATC2603C_IRQ_IR, + ATC2603C_IRQ_REMCON, + ATC2603C_IRQ_POWER_IN, +}; + +/* PMU Registers */ +#define ATC2603C_PMU_SYS_CTL0 0x00 +#define ATC2603C_PMU_SYS_CTL1 0x01 +#define ATC2603C_PMU_SYS_CTL2 0x02 +#define ATC2603C_PMU_SYS_CTL3 0x03 +#define ATC2603C_PMU_SYS_CTL4 0x04 +#define ATC2603C_PMU_SYS_CTL5 0x05 +#define ATC2603C_PMU_SYS_CTL6 0x06 +#define ATC2603C_PMU_SYS_CTL7 0x07 +#define ATC2603C_PMU_SYS_CTL8 0x08 +#define ATC2603C_PMU_SYS_CTL9 0x09 +#define ATC2603C_PMU_BAT_CTL0 0x0A +#define ATC2603C_PMU_BAT_CTL1 0x0B +#define ATC2603C_PMU_VBUS_CTL0 0x0C +#define ATC2603C_PMU_VBUS_CTL1 0x0D +#define ATC2603C_PMU_WALL_CTL0 0x0E +#define ATC2603C_PMU_WALL_CTL1 0x0F +#define ATC2603C_PMU_SYS_PENDING 0x10 +#define ATC2603C_PMU_DC1_CTL0 0x11 +#define ATC2603C_PMU_DC1_CTL1 0x12 // Undocumented +#define ATC2603C_PMU_DC1_CTL2 0x13 // Undocumented +#define ATC2603C_PMU_DC2_CTL0 0x14 +#define ATC2603C_PMU_DC2_CTL1 0x15 // Undocumented +#define ATC2603C_PMU_DC2_CTL2 0x16 // Undocumented +#define ATC2603C_PMU_DC3_CTL0 0x17 +#define ATC2603C_PMU_DC3_CTL1 0x18 // Undocumented +#define ATC2603C_PMU_DC3_CTL2 0x19 // Undocumented +#define ATC2603C_PMU_DC4_CTL0 0x1A // Undocumented +#define ATC2603C_PMU_DC4_CTL1 0x1B // Undocumented +#define ATC2603C_PMU_DC5_CTL0 0x1C // Undocumented +#define ATC2603C_PMU_DC5_CTL1 0x1D // Undocumented +#define ATC2603C_PMU_LDO1_CTL 0x1E +#define ATC2603C_PMU_LDO2_CTL 0x1F +#define ATC2603C_PMU_LDO3_CTL 0x20 +#define ATC2603C_PMU_LDO4_CTL 0x21 // Undocumented +#define ATC2603C_PMU_LDO5_CTL 0x22 +#define ATC2603C_PMU_LDO6_CTL 0x23 +#define ATC2603C_PMU_LDO7_CTL 0x24 +#define ATC2603C_PMU_LDO8_CTL 0x25 // Undocumented +#define ATC2603C_PMU_LDO9_CTL 0x26 // Undocumented +#define ATC2603C_PMU_LDO10_CTL 0x27 // Undocumented +#define ATC2603C_PMU_LDO11_CTL 0x28 +#define ATC2603C_PMU_SWITCH_CTL 0x29 +#define ATC2603C_PMU_OV_CTL0 0x2A +#define ATC2603C_PMU_OV_CTL1 0x2B +#define ATC2603C_PMU_OV_STATUS 0x2C +#define ATC2603C_PMU_OV_EN 0x2D +#define ATC2603C_PMU_OV_INT_EN 0x2E +#define ATC2603C_PMU_OC_CTL 0x2F +#define ATC2603C_PMU_OC_STATUS 0x30 +#define ATC2603C_PMU_OC_EN 0x31 +#define ATC2603C_PMU_OC_INT_EN 0x32 +#define ATC2603C_PMU_UV_CTL0 0x33 +#define ATC2603C_PMU_UV_CTL1 0x34 +#define ATC2603C_PMU_UV_STATUS 0x35 +#define ATC2603C_PMU_UV_EN 0x36 +#define ATC2603C_PMU_UV_INT_EN 0x37 +#define ATC2603C_PMU_OT_CTL 0x38 +#define ATC2603C_PMU_CHARGER_CTL0 0x39 +#define ATC2603C_PMU_CHARGER_CTL1 0x3A +#define ATC2603C_PMU_CHARGER_CTL2 0x3B +#define ATC2603C_PMU_BAKCHARGER_CTL 0x3C // Undocumented +#define ATC2603C_PMU_APDS_CTL 0x3D +#define ATC2603C_PMU_AUXADC_CTL0 0x3E +#define ATC2603C_PMU_AUXADC_CTL1 0x3F +#define ATC2603C_PMU_BATVADC 0x40 +#define ATC2603C_PMU_BATIADC 0x41 +#define ATC2603C_PMU_WALLVADC 0x42 +#define ATC2603C_PMU_WALLIADC 0x43 +#define ATC2603C_PMU_VBUSVADC 0x44 +#define ATC2603C_PMU_VBUSIADC 0x45 +#define ATC2603C_PMU_SYSPWRADC 0x46 +#define ATC2603C_PMU_REMCONADC 0x47 +#define ATC2603C_PMU_SVCCADC 0x48 +#define ATC2603C_PMU_CHGIADC 0x49 +#define ATC2603C_PMU_IREFADC 0x4A +#define ATC2603C_PMU_BAKBATADC 0x4B +#define ATC2603C_PMU_ICTEMPADC 0x4C +#define ATC2603C_PMU_AUXADC0 0x4D +#define ATC2603C_PMU_AUXADC1 0x4E +#define ATC2603C_PMU_AUXADC2 0x4F +#define ATC2603C_PMU_ICMADC 0x50 +#define ATC2603C_PMU_BDG_CTL 0x51 // Undocumented +#define ATC2603C_RTC_CTL 0x52 +#define ATC2603C_RTC_MSALM 0x53 +#define ATC2603C_RTC_HALM 0x54 +#define ATC2603C_RTC_YMDALM 0x55 +#define ATC2603C_RTC_MS 0x56 +#define ATC2603C_RTC_H 0x57 +#define ATC2603C_RTC_DC 0x58 +#define ATC2603C_RTC_YMD 0x59 +#define ATC2603C_EFUSE_DAT 0x5A // Undocumented +#define ATC2603C_EFUSECRTL1 0x5B // Undocumented +#define ATC2603C_EFUSECRTL2 0x5C // Undocumented +#define ATC2603C_PMU_FW_USE0 0x5D // Undocumented +#define ATC2603C_PMU_FW_USE1 0x5E // Undocumented +#define ATC2603C_PMU_FW_USE2 0x5F // Undocumented +#define ATC2603C_PMU_FW_USE3 0x60 // Undocumented +#define ATC2603C_PMU_FW_USE4 0x61 // Undocumented +#define ATC2603C_PMU_ABNORMAL_STATUS 0x62 +#define ATC2603C_PMU_WALL_APDS_CTL 0x63 +#define ATC2603C_PMU_REMCON_CTL0 0x64 +#define ATC2603C_PMU_REMCON_CTL1 0x65 +#define ATC2603C_PMU_MUX_CTL0 0x66 +#define ATC2603C_PMU_SGPIO_CTL0 0x67 +#define ATC2603C_PMU_SGPIO_CTL1 0x68 +#define ATC2603C_PMU_SGPIO_CTL2 0x69 +#define ATC2603C_PMU_SGPIO_CTL3 0x6A +#define ATC2603C_PMU_SGPIO_CTL4 0x6B +#define ATC2603C_PWMCLK_CTL 0x6C +#define ATC2603C_PWM0_CTL 0x6D +#define ATC2603C_PWM1_CTL 0x6E +#define ATC2603C_PMU_ADC_DBG0 0x70 +#define ATC2603C_PMU_ADC_DBG1 0x71 +#define ATC2603C_PMU_ADC_DBG2 0x72 +#define ATC2603C_PMU_ADC_DBG3 0x73 +#define ATC2603C_PMU_ADC_DBG4 0x74 +#define ATC2603C_IRC_CTL 0x80 +#define ATC2603C_IRC_STAT 0x81 +#define ATC2603C_IRC_CC 0x82 +#define ATC2603C_IRC_KDC 0x83 +#define ATC2603C_IRC_WK 0x84 +#define ATC2603C_IRC_RCC 0x85 +#define ATC2603C_IRC_FILTER 0x86 + +/* AUDIO_OUT Registers */ +#define ATC2603C_AUDIOINOUT_CTL 0xA0 +#define ATC2603C_AUDIO_DEBUGOUTCTL 0xA1 +#define ATC2603C_DAC_DIGITALCTL 0xA2 +#define ATC2603C_DAC_VOLUMECTL0 0xA3 +#define ATC2603C_DAC_ANALOG0 0xA4 +#define ATC2603C_DAC_ANALOG1 0xA5 +#define ATC2603C_DAC_ANALOG2 0xA6 +#define ATC2603C_DAC_ANALOG3 0xA7 + +/* AUDIO_IN Registers */ +#define ATC2603C_ADC_DIGITALCTL 0xA8 +#define ATC2603C_ADC_HPFCTL 0xA9 +#define ATC2603C_ADC_CTL 0xAA +#define ATC2603C_AGC_CTL0 0xAB +#define ATC2603C_AGC_CTL1 0xAC // Undocumented +#define ATC2603C_AGC_CTL2 0xAD +#define ATC2603C_ADC_ANALOG0 0xAE +#define ATC2603C_ADC_ANALOG1 0xAF + +/* PCM_IF Registers */ +#define ATC2603C_PCM0_CTL 0xB0 // Undocumented +#define ATC2603C_PCM1_CTL 0xB1 // Undocumented +#define ATC2603C_PCM2_CTL 0xB2 // Undocumented +#define ATC2603C_PCMIF_CTL 0xB3 // Undocumented + +/* CMU_CONTROL Registers */ +#define ATC2603C_CMU_DEVRST 0xC1 // Undocumented + +/* INTS Registers */ +#define ATC2603C_INTS_PD 0xC8 +#define ATC2603C_INTS_MSK 0xC9 + +/* MFP Registers */ +#define ATC2603C_MFP_CTL 0xD0 +#define ATC2603C_PAD_VSEL 0xD1 // Undocumented +#define ATC2603C_GPIO_OUTEN 0xD2 +#define ATC2603C_GPIO_INEN 0xD3 +#define ATC2603C_GPIO_DAT 0xD4 +#define ATC2603C_PAD_DRV 0xD5 +#define ATC2603C_PAD_EN 0xD6 +#define ATC2603C_DEBUG_SEL 0xD7 // Undocumented +#define ATC2603C_DEBUG_IE 0xD8 // Undocumented +#define ATC2603C_DEBUG_OE 0xD9 // Undocumented +#define ATC2603C_BIST_START 0x0A // Undocumented +#define ATC2603C_BIST_RESULT 0x0B // Undocumented +#define ATC2603C_CHIP_VER 0xDC + +/* TWSI Registers */ +#define ATC2603C_SADDR 0xFF + +/* PMU_SYS_CTL0 Register Mask Bits */ +#define ATC2603C_PMU_SYS_CTL0_IR_WK_EN BIT(5) +#define ATC2603C_PMU_SYS_CTL0_RESET_WK_EN BIT(6) +#define ATC2603C_PMU_SYS_CTL0_HDSW_WK_EN BIT(7) +#define ATC2603C_PMU_SYS_CTL0_ALARM_WK_EN BIT(8) +#define ATC2603C_PMU_SYS_CTL0_REM_CON_WK_EN BIT(9) +#define ATC2603C_PMU_SYS_CTL0_RESTART_EN BIT(10) +#define ATC2603C_PMU_SYS_CTL0_SGPIOIRQ_WK_EN BIT(11) +#define ATC2603C_PMU_SYS_CTL0_ONOFF_SHORT_WK_EN BIT(12) +#define ATC2603C_PMU_SYS_CTL0_ONOFF_LONG_WK_EN BIT(13) +#define ATC2603C_PMU_SYS_CTL0_WALL_WK_EN BIT(14) +#define ATC2603C_PMU_SYS_CTL0_USB_WK_EN BIT(15) +#define ATC2603C_PMU_SYS_CTL0_WK_ALL (GENMASK(15, 5) & (~BIT(10))) + +/* PMU_SYS_CTL1 Register Mask Bits */ +#define ATC2603C_PMU_SYS_CTL1_EN_S1 BIT(0) +#define ATC2603C_PMU_SYS_CTL1_LB_S4_EN BIT(2) +#define ATC2603C_PMU_SYS_CTL1_LB_S4 GENMASK(4, 3) +#define ATC2603C_PMU_SYS_CTL1_LB_S4_3_1V BIT(4) +#define ATC2603C_PMU_SYS_CTL1_IR_WK_FLAG BIT(5) +#define ATC2603C_PMU_SYS_CTL1_RESET_WK_FLAG BIT(6) +#define ATC2603C_PMU_SYS_CTL1_HDSW_WK_FLAG BIT(7) +#define ATC2603C_PMU_SYS_CTL1_ALARM_WK_FLAG BIT(8) +#define ATC2603C_PMU_SYS_CTL1_REM_CON_WK_FLAG BIT(9) +#define ATC2603C_PMU_SYS_CTL1_ONOFF_PRESS_RESET_IRQ_PD BIT(10) +#define ATC2603C_PMU_SYS_CTL1_SGPIOIRQ_WK_FLAG BIT(11) +#define ATC2603C_PMU_SYS_CTL1_ONOFF_SHORT_WK_FLAG BIT(12) +#define ATC2603C_PMU_SYS_CTL1_ONOFF_LONG_WK_FLAG BIT(13) +#define ATC2603C_PMU_SYS_CTL1_WALL_WK_FLAG BIT(14) +#define ATC2603C_PMU_SYS_CTL1_USB_WK_FLAG BIT(15) + +/* PMU_SYS_CTL2 Register Mask Bits */ +#define ATC2603C_PMU_SYS_CTL2_PMU_A_EN BIT(0) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_INT_EN BIT(1) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_PD BIT(2) +#define ATC2603C_PMU_SYS_CTL2_S2TIMER GENMASK(5, 3) +#define ATC2603C_PMU_SYS_CTL2_S2_TIMER_EN BIT(6) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL GENMASK(8, 7) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_RESET_EN BIT(9) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_TIME GENMASK(11, 10) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_INT_EN BIT(12) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_LONG_PRESS BIT(13) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_SHORT_PRESS BIT(14) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS BIT(15) + +/* PMU_SYS_CTL3 Register Mask Bits */ +#define ATC2603C_PMU_SYS_CTL3_S2S3TOS1_TIMER GENMASK(8, 7) +#define ATC2603C_PMU_SYS_CTL3_S2S3TOS1_TIMER_EN BIT(9) +#define ATC2603C_PMU_SYS_CTL3_S3_TIMER GENMASK(12, 10) +#define ATC2603C_PMU_SYS_CTL3_S3_TIMER_EN BIT(13) +#define ATC2603C_PMU_SYS_CTL3_EN_S3 BIT(14) +#define ATC2603C_PMU_SYS_CTL3_EN_S2 BIT(15) + +/* PMU_SYS_CTL5 Register Mask Bits */ +#define ATC2603C_PMU_SYS_CTL5_WALLWKDTEN BIT(7) +#define ATC2603C_PMU_SYS_CTL5_VBUSWKDTEN BIT(8) +#define ATC2603C_PMU_SYS_CTL5_REMCON_DECT_EN BIT(9) +#define ATC2603C_PMU_SYS_CTL5_ONOFF_8S_SEL BIT(10) + +/* INTS_MSK Register Mask Bits */ +#define ATC2603C_INTS_MSK_AUDIO BIT(0) +#define ATC2603C_INTS_MSK_OV BIT(1) +#define ATC2603C_INTS_MSK_OC BIT(2) +#define ATC2603C_INTS_MSK_OT BIT(3) +#define ATC2603C_INTS_MSK_UV BIT(4) +#define ATC2603C_INTS_MSK_ALARM BIT(5) +#define ATC2603C_INTS_MSK_ONOFF BIT(6) +#define ATC2603C_INTS_MSK_SGPIO BIT(7) +#define ATC2603C_INTS_MSK_IR BIT(8) +#define ATC2603C_INTS_MSK_REMCON BIT(9) +#define ATC2603C_INTS_MSK_POWERIN BIT(10) + +/* CMU_DEVRST Register Mask Bits */ +#define ATC2603C_CMU_DEVRST_MFP BIT(1) +#define ATC2603C_CMU_DEVRST_INTS BIT(2) +#define ATC2603C_CMU_DEVRST_AUDIO BIT(4) + +/* PAD_EN Register Mask Bits */ +#define ATC2603C_PAD_EN_EXTIRQ BIT(0) + +#endif /* __LINUX_MFD_ATC260X_ATC2603C_H */ diff --git a/include/linux/mfd/atc260x/atc2609a.h b/include/linux/mfd/atc260x/atc2609a.h new file mode 100644 index 000000000000..b957d7bd73e9 --- /dev/null +++ b/include/linux/mfd/atc260x/atc2609a.h @@ -0,0 +1,308 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * ATC2609A PMIC register definitions + * + * Copyright (C) 2019 Manivannan Sadhasivam + */ + +#ifndef __LINUX_MFD_ATC260X_ATC2609A_H +#define __LINUX_MFD_ATC260X_ATC2609A_H + +enum atc2609a_irq_def { + ATC2609A_IRQ_AUDIO = 0, + ATC2609A_IRQ_OV, + ATC2609A_IRQ_OC, + ATC2609A_IRQ_OT, + ATC2609A_IRQ_UV, + ATC2609A_IRQ_ALARM, + ATC2609A_IRQ_ONOFF, + ATC2609A_IRQ_WKUP, + ATC2609A_IRQ_IR, + ATC2609A_IRQ_REMCON, + ATC2609A_IRQ_POWER_IN, +}; + +/* PMU Registers */ +#define ATC2609A_PMU_SYS_CTL0 0x00 +#define ATC2609A_PMU_SYS_CTL1 0x01 +#define ATC2609A_PMU_SYS_CTL2 0x02 +#define ATC2609A_PMU_SYS_CTL3 0x03 +#define ATC2609A_PMU_SYS_CTL4 0x04 +#define ATC2609A_PMU_SYS_CTL5 0x05 +#define ATC2609A_PMU_SYS_CTL6 0x06 +#define ATC2609A_PMU_SYS_CTL7 0x07 +#define ATC2609A_PMU_SYS_CTL8 0x08 +#define ATC2609A_PMU_SYS_CTL9 0x09 +#define ATC2609A_PMU_BAT_CTL0 0x0A +#define ATC2609A_PMU_BAT_CTL1 0x0B +#define ATC2609A_PMU_VBUS_CTL0 0x0C +#define ATC2609A_PMU_VBUS_CTL1 0x0D +#define ATC2609A_PMU_WALL_CTL0 0x0E +#define ATC2609A_PMU_WALL_CTL1 0x0F +#define ATC2609A_PMU_SYS_PENDING 0x10 +#define ATC2609A_PMU_APDS_CTL0 0x11 +#define ATC2609A_PMU_APDS_CTL1 0x12 +#define ATC2609A_PMU_APDS_CTL2 0x13 +#define ATC2609A_PMU_CHARGER_CTL 0x14 +#define ATC2609A_PMU_BAKCHARGER_CTL 0x15 +#define ATC2609A_PMU_SWCHG_CTL0 0x16 +#define ATC2609A_PMU_SWCHG_CTL1 0x17 +#define ATC2609A_PMU_SWCHG_CTL2 0x18 +#define ATC2609A_PMU_SWCHG_CTL3 0x19 +#define ATC2609A_PMU_SWCHG_CTL4 0x1A +#define ATC2609A_PMU_DC_OSC 0x1B +#define ATC2609A_PMU_DC0_CTL0 0x1C +#define ATC2609A_PMU_DC0_CTL1 0x1D +#define ATC2609A_PMU_DC0_CTL2 0x1E +#define ATC2609A_PMU_DC0_CTL3 0x1F +#define ATC2609A_PMU_DC0_CTL4 0x20 +#define ATC2609A_PMU_DC0_CTL5 0x21 +#define ATC2609A_PMU_DC0_CTL6 0x22 +#define ATC2609A_PMU_DC1_CTL0 0x23 +#define ATC2609A_PMU_DC1_CTL1 0x24 +#define ATC2609A_PMU_DC1_CTL2 0x25 +#define ATC2609A_PMU_DC1_CTL3 0x26 +#define ATC2609A_PMU_DC1_CTL4 0x27 +#define ATC2609A_PMU_DC1_CTL5 0x28 +#define ATC2609A_PMU_DC1_CTL6 0x29 +#define ATC2609A_PMU_DC2_CTL0 0x2A +#define ATC2609A_PMU_DC2_CTL1 0x2B +#define ATC2609A_PMU_DC2_CTL2 0x2C +#define ATC2609A_PMU_DC2_CTL3 0x2D +#define ATC2609A_PMU_DC2_CTL4 0x2E +#define ATC2609A_PMU_DC2_CTL5 0x2F +#define ATC2609A_PMU_DC2_CTL6 0x30 +#define ATC2609A_PMU_DC3_CTL0 0x31 +#define ATC2609A_PMU_DC3_CTL1 0x32 +#define ATC2609A_PMU_DC3_CTL2 0x33 +#define ATC2609A_PMU_DC3_CTL3 0x34 +#define ATC2609A_PMU_DC3_CTL4 0x35 +#define ATC2609A_PMU_DC3_CTL5 0x36 +#define ATC2609A_PMU_DC3_CTL6 0x37 +#define ATC2609A_PMU_DC_ZR 0x38 +#define ATC2609A_PMU_LDO0_CTL0 0x39 +#define ATC2609A_PMU_LDO0_CTL1 0x3A +#define ATC2609A_PMU_LDO1_CTL0 0x3B +#define ATC2609A_PMU_LDO1_CTL1 0x3C +#define ATC2609A_PMU_LDO2_CTL0 0x3D +#define ATC2609A_PMU_LDO2_CTL1 0x3E +#define ATC2609A_PMU_LDO3_CTL0 0x3F +#define ATC2609A_PMU_LDO3_CTL1 0x40 +#define ATC2609A_PMU_LDO4_CTL0 0x41 +#define ATC2609A_PMU_LDO4_CTL1 0x42 +#define ATC2609A_PMU_LDO5_CTL0 0x43 +#define ATC2609A_PMU_LDO5_CTL1 0x44 +#define ATC2609A_PMU_LDO6_CTL0 0x45 +#define ATC2609A_PMU_LDO6_CTL1 0x46 +#define ATC2609A_PMU_LDO7_CTL0 0x47 +#define ATC2609A_PMU_LDO7_CTL1 0x48 +#define ATC2609A_PMU_LDO8_CTL0 0x49 +#define ATC2609A_PMU_LDO8_CTL1 0x4A +#define ATC2609A_PMU_LDO9_CTL 0x4B +#define ATC2609A_PMU_OV_INT_EN 0x4C +#define ATC2609A_PMU_OV_STATUS 0x4D +#define ATC2609A_PMU_UV_INT_EN 0x4E +#define ATC2609A_PMU_UV_STATUS 0x4F +#define ATC2609A_PMU_OC_INT_EN 0x50 +#define ATC2609A_PMU_OC_STATUS 0x51 +#define ATC2609A_PMU_OT_CTL 0x52 +#define ATC2609A_PMU_CM_CTL0 0x53 +#define ATC2609A_PMU_FW_USE0 0x54 +#define ATC2609A_PMU_FW_USE1 0x55 +#define ATC2609A_PMU_ADC12B_I 0x56 +#define ATC2609A_PMU_ADC12B_V 0x57 +#define ATC2609A_PMU_ADC12B_DUMMY 0x58 +#define ATC2609A_PMU_AUXADC_CTL0 0x59 +#define ATC2609A_PMU_AUXADC_CTL1 0x5A +#define ATC2609A_PMU_BATVADC 0x5B +#define ATC2609A_PMU_BATIADC 0x5C +#define ATC2609A_PMU_WALLVADC 0x5D +#define ATC2609A_PMU_WALLIADC 0x5E +#define ATC2609A_PMU_VBUSVADC 0x5F +#define ATC2609A_PMU_VBUSIADC 0x60 +#define ATC2609A_PMU_SYSPWRADC 0x61 +#define ATC2609A_PMU_REMCONADC 0x62 +#define ATC2609A_PMU_SVCCADC 0x63 +#define ATC2609A_PMU_CHGIADC 0x64 +#define ATC2609A_PMU_IREFADC 0x65 +#define ATC2609A_PMU_BAKBATADC 0x66 +#define ATC2609A_PMU_ICTEMPADC 0x67 +#define ATC2609A_PMU_AUXADC0 0x68 +#define ATC2609A_PMU_AUXADC1 0x69 +#define ATC2609A_PMU_AUXADC2 0x6A +#define ATC2609A_PMU_AUXADC3 0x6B +#define ATC2609A_PMU_ICTEMPADC_ADJ 0x6C +#define ATC2609A_PMU_BDG_CTL 0x6D +#define ATC2609A_RTC_CTL 0x6E +#define ATC2609A_RTC_MSALM 0x6F +#define ATC2609A_RTC_HALM 0x70 +#define ATC2609A_RTC_YMDALM 0x71 +#define ATC2609A_RTC_MS 0x72 +#define ATC2609A_RTC_H 0x73 +#define ATC2609A_RTC_DC 0x74 +#define ATC2609A_RTC_YMD 0x75 +#define ATC2609A_EFUSE_DAT 0x76 +#define ATC2609A_EFUSECRTL1 0x77 +#define ATC2609A_EFUSECRTL2 0x78 +#define ATC2609A_PMU_DC4_CTL0 0x79 +#define ATC2609A_PMU_DC4_CTL1 0x7A +#define ATC2609A_PMU_DC4_CTL2 0x7B +#define ATC2609A_PMU_DC4_CTL3 0x7C +#define ATC2609A_PMU_DC4_CTL4 0x7D +#define ATC2609A_PMU_DC4_CTL5 0x7E +#define ATC2609A_PMU_DC4_CTL6 0x7F +#define ATC2609A_PMU_PWR_STATUS 0x80 +#define ATC2609A_PMU_S2_PWR 0x81 +#define ATC2609A_CLMT_CTL0 0x82 +#define ATC2609A_CLMT_DATA0 0x83 +#define ATC2609A_CLMT_DATA1 0x84 +#define ATC2609A_CLMT_DATA2 0x85 +#define ATC2609A_CLMT_DATA3 0x86 +#define ATC2609A_CLMT_ADD0 0x87 +#define ATC2609A_CLMT_ADD1 0x88 +#define ATC2609A_CLMT_OCV_TABLE 0x89 +#define ATC2609A_CLMT_R_TABLE 0x8A +#define ATC2609A_PMU_PWRON_CTL0 0x8D +#define ATC2609A_PMU_PWRON_CTL1 0x8E +#define ATC2609A_PMU_PWRON_CTL2 0x8F +#define ATC2609A_IRC_CTL 0x90 +#define ATC2609A_IRC_STAT 0x91 +#define ATC2609A_IRC_CC 0x92 +#define ATC2609A_IRC_KDC 0x93 +#define ATC2609A_IRC_WK 0x94 +#define ATC2609A_IRC_RCC 0x95 + +/* AUDIO_OUT Registers */ +#define ATC2609A_AUDIOINOUT_CTL 0xA0 +#define ATC2609A_AUDIO_DEBUGOUTCTL 0xA1 +#define ATC2609A_DAC_DIGITALCTL 0xA2 +#define ATC2609A_DAC_VOLUMECTL0 0xA3 +#define ATC2609A_DAC_ANALOG0 0xA4 +#define ATC2609A_DAC_ANALOG1 0xA5 +#define ATC2609A_DAC_ANALOG2 0xA6 +#define ATC2609A_DAC_ANALOG3 0xA7 + +/* AUDIO_IN Registers */ +#define ATC2609A_ADC_DIGITALCTL 0xA8 +#define ATC2609A_ADC_HPFCTL 0xA9 +#define ATC2609A_ADC_CTL 0xAA +#define ATC2609A_AGC_CTL0 0xAB +#define ATC2609A_AGC_CTL1 0xAC +#define ATC2609A_AGC_CTL2 0xAD +#define ATC2609A_ADC_ANALOG0 0xAE +#define ATC2609A_ADC_ANALOG1 0xAF + +/* PCM_IF Registers */ +#define ATC2609A_PCM0_CTL 0xB0 +#define ATC2609A_PCM1_CTL 0xB1 +#define ATC2609A_PCM2_CTL 0xB2 +#define ATC2609A_PCMIF_CTL 0xB3 + +/* CMU_CONTROL Registers */ +#define ATC2609A_CMU_DEVRST 0xC1 + +/* INTS Registers */ +#define ATC2609A_INTS_PD 0xC8 +#define ATC2609A_INTS_MSK 0xC9 + +/* MFP Registers */ +#define ATC2609A_MFP_CTL 0xD0 +#define ATC2609A_PAD_VSEL 0xD1 +#define ATC2609A_GPIO_OUTEN 0xD2 +#define ATC2609A_GPIO_INEN 0xD3 +#define ATC2609A_GPIO_DAT 0xD4 +#define ATC2609A_PAD_DRV 0xD5 +#define ATC2609A_PAD_EN 0xD6 +#define ATC2609A_DEBUG_SEL 0xD7 +#define ATC2609A_DEBUG_IE 0xD8 +#define ATC2609A_DEBUG_OE 0xD9 +#define ATC2609A_CHIP_VER 0xDC + +/* PWSI Registers */ +#define ATC2609A_PWSI_CTL 0xF0 +#define ATC2609A_PWSI_STATUS 0xF1 + +/* TWSI Registers */ +#define ATC2609A_SADDR 0xFF + +/* PMU_SYS_CTL0 Register Mask Bits */ +#define ATC2609A_PMU_SYS_CTL0_IR_WK_EN BIT(5) +#define ATC2609A_PMU_SYS_CTL0_RESET_WK_EN BIT(6) +#define ATC2609A_PMU_SYS_CTL0_HDSW_WK_EN BIT(7) +#define ATC2609A_PMU_SYS_CTL0_ALARM_WK_EN BIT(8) +#define ATC2609A_PMU_SYS_CTL0_REM_CON_WK_EN BIT(9) +#define ATC2609A_PMU_SYS_CTL0_RESTART_EN BIT(10) +#define ATC2609A_PMU_SYS_CTL0_WKIRQ_WK_EN BIT(11) +#define ATC2609A_PMU_SYS_CTL0_ONOFF_SHORT_WK_EN BIT(12) +#define ATC2609A_PMU_SYS_CTL0_ONOFF_LONG_WK_EN BIT(13) +#define ATC2609A_PMU_SYS_CTL0_WALL_WK_EN BIT(14) +#define ATC2609A_PMU_SYS_CTL0_USB_WK_EN BIT(15) +#define ATC2609A_PMU_SYS_CTL0_WK_ALL (GENMASK(15, 5) & (~BIT(10))) + +/* PMU_SYS_CTL1 Register Mask Bits */ +#define ATC2609A_PMU_SYS_CTL1_EN_S1 BIT(0) +#define ATC2609A_PMU_SYS_CTL1_LB_S4_EN BIT(2) +#define ATC2609A_PMU_SYS_CTL1_LB_S4 GENMASK(4, 3) +#define ATC2609A_PMU_SYS_CTL1_LB_S4_3_1V BIT(4) +#define ATC2609A_PMU_SYS_CTL1_IR_WK_FLAG BIT(5) +#define ATC2609A_PMU_SYS_CTL1_RESET_WK_FLAG BIT(6) +#define ATC2609A_PMU_SYS_CTL1_HDSW_WK_FLAG BIT(7) +#define ATC2609A_PMU_SYS_CTL1_ALARM_WK_FLAG BIT(8) +#define ATC2609A_PMU_SYS_CTL1_REM_CON_WK_FLAG BIT(9) +#define ATC2609A_PMU_SYS_CTL1_RESTART_WK_FLAG BIT(10) +#define ATC2609A_PMU_SYS_CTL1_WKIRQ_WK_FLAG BIT(11) +#define ATC2609A_PMU_SYS_CTL1_ONOFF_SHORT_WK_FLAG BIT(12) +#define ATC2609A_PMU_SYS_CTL1_ONOFF_LONG_WK_FLAG BIT(13) +#define ATC2609A_PMU_SYS_CTL1_WALL_WK_FLAG BIT(14) +#define ATC2609A_PMU_SYS_CTL1_USB_WK_FLAG BIT(15) + +/* PMU_SYS_CTL2 Register Mask Bits */ +#define ATC2609A_PMU_SYS_CTL2_PMU_A_EN BIT(0) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_INT_EN BIT(1) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_PD BIT(2) +#define ATC2609A_PMU_SYS_CTL2_S2TIMER GENMASK(5, 3) +#define ATC2609A_PMU_SYS_CTL2_S2_TIMER_EN BIT(6) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL GENMASK(8, 7) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_EN BIT(9) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_TIME GENMASK(11, 10) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_LSP_INT_EN BIT(12) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_LONG_PRESS BIT(13) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_SHORT_PRESS BIT(14) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS BIT(15) + +/* PMU_SYS_CTL3 Register Mask Bits */ +#define ATC2609A_PMU_SYS_CTL3_S2S3TOS1_TIMER GENMASK(8, 7) +#define ATC2609A_PMU_SYS_CTL3_S2S3TOS1_TIMER_EN BIT(9) +#define ATC2609A_PMU_SYS_CTL3_S3_TIMER GENMASK(12, 10) +#define ATC2609A_PMU_SYS_CTL3_S3_TIMER_EN BIT(13) +#define ATC2609A_PMU_SYS_CTL3_EN_S3 BIT(14) +#define ATC2609A_PMU_SYS_CTL3_EN_S2 BIT(15) + +/* PMU_SYS_CTL5 Register Mask Bits */ +#define ATC2609A_PMU_SYS_CTL5_WALLWKDTEN BIT(7) +#define ATC2609A_PMU_SYS_CTL5_VBUSWKDTEN BIT(8) +#define ATC2609A_PMU_SYS_CTL5_REMCON_DECT_EN BIT(9) +#define ATC2609A_PMU_SYS_CTL5_ONOFF_8S_SEL BIT(10) + +/* INTS_MSK Register Mask Bits */ +#define ATC2609A_INTS_MSK_AUDIO BIT(0) +#define ATC2609A_INTS_MSK_OV BIT(1) +#define ATC2609A_INTS_MSK_OC BIT(2) +#define ATC2609A_INTS_MSK_OT BIT(3) +#define ATC2609A_INTS_MSK_UV BIT(4) +#define ATC2609A_INTS_MSK_ALARM BIT(5) +#define ATC2609A_INTS_MSK_ONOFF BIT(6) +#define ATC2609A_INTS_MSK_WKUP BIT(7) +#define ATC2609A_INTS_MSK_IR BIT(8) +#define ATC2609A_INTS_MSK_REMCON BIT(9) +#define ATC2609A_INTS_MSK_POWERIN BIT(10) + +/* CMU_DEVRST Register Mask Bits */ +#define ATC2609A_CMU_DEVRST_AUDIO BIT(0) +#define ATC2609A_CMU_DEVRST_MFP BIT(1) +#define ATC2609A_CMU_DEVRST_INTS BIT(2) + +/* PAD_EN Register Mask Bits */ +#define ATC2609A_PAD_EN_EXTIRQ BIT(0) + +#endif /* __LINUX_MFD_ATC260X_ATC2609A_H */ diff --git a/include/linux/mfd/atc260x/core.h b/include/linux/mfd/atc260x/core.h new file mode 100644 index 000000000000..777b6c345d44 --- /dev/null +++ b/include/linux/mfd/atc260x/core.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Core MFD defines for ATC260x PMICs + * + * Copyright (C) 2019 Manivannan Sadhasivam + * Copyright (C) 2020 Cristian Ciocaltea + */ + +#ifndef __LINUX_MFD_ATC260X_CORE_H +#define __LINUX_MFD_ATC260X_CORE_H + +#include +#include + +enum atc260x_type { + ATC2603A = 0, + ATC2603C, + ATC2609A, +}; + +enum atc260x_ver { + ATC260X_A = 0, + ATC260X_B, + ATC260X_C, + ATC260X_D, + ATC260X_E, + ATC260X_F, + ATC260X_G, + ATC260X_H, +}; + +struct atc260x { + struct device *dev; + + struct regmap *regmap; + const struct regmap_irq_chip *regmap_irq_chip; + struct regmap_irq_chip_data *irq_data; + + struct mutex *regmap_mutex; /* mutex for custom regmap locking */ + + const struct mfd_cell *cells; + int nr_cells; + int irq; + + enum atc260x_type ic_type; + enum atc260x_ver ic_ver; + const char *type_name; + unsigned int rev_reg; + + const struct atc260x_init_regs *init_regs; /* regs for device init */ +}; + +struct regmap_config; + +int atc260x_match_device(struct atc260x *atc260x, struct regmap_config *regmap_cfg); +int atc260x_device_probe(struct atc260x *atc260x); + +#endif /* __LINUX_MFD_ATC260X_CORE_H */ -- cgit v1.2.3 From 16f961544bfd7170f75d805d7585e09023671dbc Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sun, 7 Mar 2021 21:23:25 +0100 Subject: mfd: Remove support for AB3100 The ST-Ericsson U300 platform has been removed, so this driver is no longer needed. Signed-off-by: Arnd Bergmann Reviewed-by: Linus Walleij Signed-off-by: Lee Jones --- drivers/mfd/Kconfig | 26 +- drivers/mfd/Makefile | 2 - drivers/mfd/ab3100-core.c | 929 --------------------------------------------- drivers/mfd/ab3100-otp.c | 240 ------------ include/linux/mfd/ab3100.h | 128 ------- 5 files changed, 1 insertion(+), 1324 deletions(-) delete mode 100644 drivers/mfd/ab3100-core.c delete mode 100644 drivers/mfd/ab3100-otp.c delete mode 100644 include/linux/mfd/ab3100.h (limited to 'drivers/mfd/Makefile') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 6e31210915c7..2152126c5b0b 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1235,7 +1235,7 @@ config MFD_SC27XX_PMIC config ABX500_CORE bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" - default y if ARCH_U300 || ARCH_U8500 || COMPILE_TEST + default y if ARCH_U8500 || COMPILE_TEST help Say yes here if you have the ABX500 Mixed Signal IC family chips. This core driver expose register access functions. @@ -1243,30 +1243,6 @@ config ABX500_CORE remain unchanged when IC changes. Binding of the functions to actual register access is done by the IC core driver. -config AB3100_CORE - bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" - depends on I2C=y && ABX500_CORE - select MFD_CORE - default y if ARCH_U300 - help - Select this to enable the AB3100 Mixed Signal IC core - functionality. This connects to a AB3100 on the I2C bus - and expose a number of symbols needed for dependent devices - to read and write registers and subscribe to events from - this multi-functional IC. This is needed to use other features - of the AB3100 such as battery-backed RTC, charging control, - LEDs, vibrator, system power and temperature, power management - and ALSA sound. - -config AB3100_OTP - tristate "ST-Ericsson AB3100 OTP functions" - depends on AB3100_CORE - default y if AB3100_CORE - help - Select this to enable the AB3100 Mixed Signal IC OTP (one-time - programmable memory) support. This exposes a sysfs file to read - out OTP values. - config AB8500_CORE bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" depends on ABX500_CORE && MFD_DB8500_PRCMU diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 279b80822147..4f6d2b8a5f76 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -178,8 +178,6 @@ obj-$(CONFIG_MFD_PCF50633) += pcf50633.o obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o obj-$(CONFIG_ABX500_CORE) += abx500-core.o -obj-$(CONFIG_AB3100_CORE) += ab3100-core.o -obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o obj-$(CONFIG_MFD_DB8500_PRCMU) += db8500-prcmu.o # ab8500-core need to come after db8500-prcmu (which provides the channel) diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c deleted file mode 100644 index ee71ae04b5e6..000000000000 --- a/drivers/mfd/ab3100-core.c +++ /dev/null @@ -1,929 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2007-2010 ST-Ericsson - * Low-level core for exclusive access to the AB3100 IC on the I2C bus - * and some basic chip-configuration. - * Author: Linus Walleij - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* These are the only registers inside AB3100 used in this main file */ - -/* Interrupt event registers */ -#define AB3100_EVENTA1 0x21 -#define AB3100_EVENTA2 0x22 -#define AB3100_EVENTA3 0x23 - -/* AB3100 DAC converter registers */ -#define AB3100_DIS 0x00 -#define AB3100_D0C 0x01 -#define AB3100_D1C 0x02 -#define AB3100_D2C 0x03 -#define AB3100_D3C 0x04 - -/* Chip ID register */ -#define AB3100_CID 0x20 - -/* AB3100 interrupt registers */ -#define AB3100_IMRA1 0x24 -#define AB3100_IMRA2 0x25 -#define AB3100_IMRA3 0x26 -#define AB3100_IMRB1 0x2B -#define AB3100_IMRB2 0x2C -#define AB3100_IMRB3 0x2D - -/* System Power Monitoring and control registers */ -#define AB3100_MCA 0x2E -#define AB3100_MCB 0x2F - -/* SIM power up */ -#define AB3100_SUP 0x50 - -/* - * I2C communication - * - * The AB3100 is usually assigned address 0x48 (7-bit) - * The chip is defined in the platform i2c_board_data section. - */ -static int ab3100_get_chip_id(struct device *dev) -{ - struct ab3100 *ab3100 = dev_get_drvdata(dev->parent); - - return (int)ab3100->chip_id; -} - -static int ab3100_set_register_interruptible(struct ab3100 *ab3100, - u8 reg, u8 regval) -{ - u8 regandval[2] = {reg, regval}; - int err; - - err = mutex_lock_interruptible(&ab3100->access_mutex); - if (err) - return err; - - /* - * A two-byte write message with the first byte containing the register - * number and the second byte containing the value to be written - * effectively sets a register in the AB3100. - */ - err = i2c_master_send(ab3100->i2c_client, regandval, 2); - if (err < 0) { - dev_err(ab3100->dev, - "write error (write register): %d\n", - err); - } else if (err != 2) { - dev_err(ab3100->dev, - "write error (write register)\n" - " %d bytes transferred (expected 2)\n", - err); - err = -EIO; - } else { - /* All is well */ - err = 0; - } - mutex_unlock(&ab3100->access_mutex); - return err; -} - -static int set_register_interruptible(struct device *dev, - u8 bank, u8 reg, u8 value) -{ - struct ab3100 *ab3100 = dev_get_drvdata(dev->parent); - - return ab3100_set_register_interruptible(ab3100, reg, value); -} - -/* - * The test registers exist at an I2C bus address up one - * from the ordinary base. They are not supposed to be used - * in production code, but sometimes you have to do that - * anyway. It's currently only used from this file so declare - * it static and do not export. - */ -static int ab3100_set_test_register_interruptible(struct ab3100 *ab3100, - u8 reg, u8 regval) -{ - u8 regandval[2] = {reg, regval}; - int err; - - err = mutex_lock_interruptible(&ab3100->access_mutex); - if (err) - return err; - - err = i2c_master_send(ab3100->testreg_client, regandval, 2); - if (err < 0) { - dev_err(ab3100->dev, - "write error (write test register): %d\n", - err); - } else if (err != 2) { - dev_err(ab3100->dev, - "write error (write test register)\n" - " %d bytes transferred (expected 2)\n", - err); - err = -EIO; - } else { - /* All is well */ - err = 0; - } - mutex_unlock(&ab3100->access_mutex); - - return err; -} - -static int ab3100_get_register_interruptible(struct ab3100 *ab3100, - u8 reg, u8 *regval) -{ - int err; - - err = mutex_lock_interruptible(&ab3100->access_mutex); - if (err) - return err; - - /* - * AB3100 require an I2C "stop" command between each message, else - * it will not work. The only way of achieveing this with the - * message transport layer is to send the read and write messages - * separately. - */ - err = i2c_master_send(ab3100->i2c_client, ®, 1); - if (err < 0) { - dev_err(ab3100->dev, - "write error (send register address): %d\n", - err); - goto get_reg_out_unlock; - } else if (err != 1) { - dev_err(ab3100->dev, - "write error (send register address)\n" - " %d bytes transferred (expected 1)\n", - err); - err = -EIO; - goto get_reg_out_unlock; - } else { - /* All is well */ - err = 0; - } - - err = i2c_master_recv(ab3100->i2c_client, regval, 1); - if (err < 0) { - dev_err(ab3100->dev, - "write error (read register): %d\n", - err); - goto get_reg_out_unlock; - } else if (err != 1) { - dev_err(ab3100->dev, - "write error (read register)\n" - " %d bytes transferred (expected 1)\n", - err); - err = -EIO; - goto get_reg_out_unlock; - } else { - /* All is well */ - err = 0; - } - - get_reg_out_unlock: - mutex_unlock(&ab3100->access_mutex); - return err; -} - -static int get_register_interruptible(struct device *dev, u8 bank, u8 reg, - u8 *value) -{ - struct ab3100 *ab3100 = dev_get_drvdata(dev->parent); - - return ab3100_get_register_interruptible(ab3100, reg, value); -} - -static int ab3100_get_register_page_interruptible(struct ab3100 *ab3100, - u8 first_reg, u8 *regvals, u8 numregs) -{ - int err; - - if (ab3100->chip_id == 0xa0 || - ab3100->chip_id == 0xa1) - /* These don't support paged reads */ - return -EIO; - - err = mutex_lock_interruptible(&ab3100->access_mutex); - if (err) - return err; - - /* - * Paged read also require an I2C "stop" command. - */ - err = i2c_master_send(ab3100->i2c_client, &first_reg, 1); - if (err < 0) { - dev_err(ab3100->dev, - "write error (send first register address): %d\n", - err); - goto get_reg_page_out_unlock; - } else if (err != 1) { - dev_err(ab3100->dev, - "write error (send first register address)\n" - " %d bytes transferred (expected 1)\n", - err); - err = -EIO; - goto get_reg_page_out_unlock; - } - - err = i2c_master_recv(ab3100->i2c_client, regvals, numregs); - if (err < 0) { - dev_err(ab3100->dev, - "write error (read register page): %d\n", - err); - goto get_reg_page_out_unlock; - } else if (err != numregs) { - dev_err(ab3100->dev, - "write error (read register page)\n" - " %d bytes transferred (expected %d)\n", - err, numregs); - err = -EIO; - goto get_reg_page_out_unlock; - } - - /* All is well */ - err = 0; - - get_reg_page_out_unlock: - mutex_unlock(&ab3100->access_mutex); - return err; -} - -static int get_register_page_interruptible(struct device *dev, u8 bank, - u8 first_reg, u8 *regvals, u8 numregs) -{ - struct ab3100 *ab3100 = dev_get_drvdata(dev->parent); - - return ab3100_get_register_page_interruptible(ab3100, - first_reg, regvals, numregs); -} - -static int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100, - u8 reg, u8 andmask, u8 ormask) -{ - u8 regandval[2] = {reg, 0}; - int err; - - err = mutex_lock_interruptible(&ab3100->access_mutex); - if (err) - return err; - - /* First read out the target register */ - err = i2c_master_send(ab3100->i2c_client, ®, 1); - if (err < 0) { - dev_err(ab3100->dev, - "write error (maskset send address): %d\n", - err); - goto get_maskset_unlock; - } else if (err != 1) { - dev_err(ab3100->dev, - "write error (maskset send address)\n" - " %d bytes transferred (expected 1)\n", - err); - err = -EIO; - goto get_maskset_unlock; - } - - err = i2c_master_recv(ab3100->i2c_client, ®andval[1], 1); - if (err < 0) { - dev_err(ab3100->dev, - "write error (maskset read register): %d\n", - err); - goto get_maskset_unlock; - } else if (err != 1) { - dev_err(ab3100->dev, - "write error (maskset read register)\n" - " %d bytes transferred (expected 1)\n", - err); - err = -EIO; - goto get_maskset_unlock; - } - - /* Modify the register */ - regandval[1] &= andmask; - regandval[1] |= ormask; - - /* Write the register */ - err = i2c_master_send(ab3100->i2c_client, regandval, 2); - if (err < 0) { - dev_err(ab3100->dev, - "write error (write register): %d\n", - err); - goto get_maskset_unlock; - } else if (err != 2) { - dev_err(ab3100->dev, - "write error (write register)\n" - " %d bytes transferred (expected 2)\n", - err); - err = -EIO; - goto get_maskset_unlock; - } - - /* All is well */ - err = 0; - - get_maskset_unlock: - mutex_unlock(&ab3100->access_mutex); - return err; -} - -static int mask_and_set_register_interruptible(struct device *dev, u8 bank, - u8 reg, u8 bitmask, u8 bitvalues) -{ - struct ab3100 *ab3100 = dev_get_drvdata(dev->parent); - - return ab3100_mask_and_set_register_interruptible(ab3100, - reg, bitmask, (bitmask & bitvalues)); -} - -/* - * Register a simple callback for handling any AB3100 events. - */ -int ab3100_event_register(struct ab3100 *ab3100, - struct notifier_block *nb) -{ - return blocking_notifier_chain_register(&ab3100->event_subscribers, - nb); -} -EXPORT_SYMBOL(ab3100_event_register); - -/* - * Remove a previously registered callback. - */ -int ab3100_event_unregister(struct ab3100 *ab3100, - struct notifier_block *nb) -{ - return blocking_notifier_chain_unregister(&ab3100->event_subscribers, - nb); -} -EXPORT_SYMBOL(ab3100_event_unregister); - - -static int ab3100_event_registers_startup_state_get(struct device *dev, - u8 *event) -{ - struct ab3100 *ab3100 = dev_get_drvdata(dev->parent); - - if (!ab3100->startup_events_read) - return -EAGAIN; /* Try again later */ - memcpy(event, ab3100->startup_events, 3); - - return 0; -} - -static struct abx500_ops ab3100_ops = { - .get_chip_id = ab3100_get_chip_id, - .set_register = set_register_interruptible, - .get_register = get_register_interruptible, - .get_register_page = get_register_page_interruptible, - .set_register_page = NULL, - .mask_and_set_register = mask_and_set_register_interruptible, - .event_registers_startup_state_get = - ab3100_event_registers_startup_state_get, - .startup_irq_enabled = NULL, -}; - -/* - * This is a threaded interrupt handler so we can make some - * I2C calls etc. - */ -static irqreturn_t ab3100_irq_handler(int irq, void *data) -{ - struct ab3100 *ab3100 = data; - u8 event_regs[3]; - u32 fatevent; - int err; - - err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1, - event_regs, 3); - if (err) - goto err_event; - - fatevent = (event_regs[0] << 16) | - (event_regs[1] << 8) | - event_regs[2]; - - if (!ab3100->startup_events_read) { - ab3100->startup_events[0] = event_regs[0]; - ab3100->startup_events[1] = event_regs[1]; - ab3100->startup_events[2] = event_regs[2]; - ab3100->startup_events_read = true; - } - /* - * The notified parties will have to mask out the events - * they're interested in and react to them. They will be - * notified on all events, then they use the fatevent value - * to determine if they're interested. - */ - blocking_notifier_call_chain(&ab3100->event_subscribers, - fatevent, NULL); - - dev_dbg(ab3100->dev, - "IRQ Event: 0x%08x\n", fatevent); - - return IRQ_HANDLED; - - err_event: - dev_dbg(ab3100->dev, - "error reading event status\n"); - return IRQ_HANDLED; -} - -#ifdef CONFIG_DEBUG_FS -/* - * Some debugfs entries only exposed if we're using debug - */ -static int ab3100_registers_print(struct seq_file *s, void *p) -{ - struct ab3100 *ab3100 = s->private; - u8 value; - u8 reg; - - seq_puts(s, "AB3100 registers:\n"); - - for (reg = 0; reg < 0xff; reg++) { - ab3100_get_register_interruptible(ab3100, reg, &value); - seq_printf(s, "[0x%x]: 0x%x\n", reg, value); - } - return 0; -} - -static int ab3100_registers_open(struct inode *inode, struct file *file) -{ - return single_open(file, ab3100_registers_print, inode->i_private); -} - -static const struct file_operations ab3100_registers_fops = { - .open = ab3100_registers_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -struct ab3100_get_set_reg_priv { - struct ab3100 *ab3100; - bool mode; -}; - -static ssize_t ab3100_get_set_reg(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ab3100_get_set_reg_priv *priv = file->private_data; - struct ab3100 *ab3100 = priv->ab3100; - char buf[32]; - ssize_t buf_size; - int regp; - u8 user_reg; - int err; - int i = 0; - - /* Get userspace string and assure termination */ - buf_size = min((ssize_t)count, (ssize_t)(sizeof(buf)-1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - /* - * The idea is here to parse a string which is either - * "0xnn" for reading a register, or "0xaa 0xbb" for - * writing 0xbb to the register 0xaa. First move past - * whitespace and then begin to parse the register. - */ - while ((i < buf_size) && (buf[i] == ' ')) - i++; - regp = i; - - /* - * Advance pointer to end of string then terminate - * the register string. This is needed to satisfy - * the kstrtou8() function. - */ - while ((i < buf_size) && (buf[i] != ' ')) - i++; - buf[i] = '\0'; - - err = kstrtou8(&buf[regp], 16, &user_reg); - if (err) - return err; - - /* Either we read or we write a register here */ - if (!priv->mode) { - /* Reading */ - u8 regvalue; - - ab3100_get_register_interruptible(ab3100, user_reg, ®value); - - dev_info(ab3100->dev, - "debug read AB3100 reg[0x%02x]: 0x%02x\n", - user_reg, regvalue); - } else { - int valp; - u8 user_value; - u8 regvalue; - - /* - * Writing, we need some value to write to - * the register so keep parsing the string - * from userspace. - */ - i++; - while ((i < buf_size) && (buf[i] == ' ')) - i++; - valp = i; - while ((i < buf_size) && (buf[i] != ' ')) - i++; - buf[i] = '\0'; - - err = kstrtou8(&buf[valp], 16, &user_value); - if (err) - return err; - - ab3100_set_register_interruptible(ab3100, user_reg, user_value); - ab3100_get_register_interruptible(ab3100, user_reg, ®value); - - dev_info(ab3100->dev, - "debug write reg[0x%02x]\n" - " with 0x%02x, after readback: 0x%02x\n", - user_reg, user_value, regvalue); - } - return buf_size; -} - -static const struct file_operations ab3100_get_set_reg_fops = { - .open = simple_open, - .write = ab3100_get_set_reg, - .llseek = noop_llseek, -}; - -static struct ab3100_get_set_reg_priv ab3100_get_priv; -static struct ab3100_get_set_reg_priv ab3100_set_priv; - -static void ab3100_setup_debugfs(struct ab3100 *ab3100) -{ - struct dentry *ab3100_dir; - - ab3100_dir = debugfs_create_dir("ab3100", NULL); - - debugfs_create_file("registers", S_IRUGO, ab3100_dir, ab3100, - &ab3100_registers_fops); - - ab3100_get_priv.ab3100 = ab3100; - ab3100_get_priv.mode = false; - debugfs_create_file("get_reg", S_IWUSR, ab3100_dir, &ab3100_get_priv, - &ab3100_get_set_reg_fops); - - ab3100_set_priv.ab3100 = ab3100; - ab3100_set_priv.mode = true; - debugfs_create_file("set_reg", S_IWUSR, ab3100_dir, &ab3100_set_priv, - &ab3100_get_set_reg_fops); -} -#else -static inline void ab3100_setup_debugfs(struct ab3100 *ab3100) -{ -} -#endif - -/* - * Basic set-up, datastructure creation/destruction and I2C interface. - * This sets up a default config in the AB3100 chip so that it - * will work as expected. - */ - -struct ab3100_init_setting { - u8 abreg; - u8 setting; -}; - -static const struct ab3100_init_setting ab3100_init_settings[] = { - { - .abreg = AB3100_MCA, - .setting = 0x01 - }, { - .abreg = AB3100_MCB, - .setting = 0x30 - }, { - .abreg = AB3100_IMRA1, - .setting = 0x00 - }, { - .abreg = AB3100_IMRA2, - .setting = 0xFF - }, { - .abreg = AB3100_IMRA3, - .setting = 0x01 - }, { - .abreg = AB3100_IMRB1, - .setting = 0xBF - }, { - .abreg = AB3100_IMRB2, - .setting = 0xFF - }, { - .abreg = AB3100_IMRB3, - .setting = 0xFF - }, { - .abreg = AB3100_SUP, - .setting = 0x00 - }, { - .abreg = AB3100_DIS, - .setting = 0xF0 - }, { - .abreg = AB3100_D0C, - .setting = 0x00 - }, { - .abreg = AB3100_D1C, - .setting = 0x00 - }, { - .abreg = AB3100_D2C, - .setting = 0x00 - }, { - .abreg = AB3100_D3C, - .setting = 0x00 - }, -}; - -static int ab3100_setup(struct ab3100 *ab3100) -{ - int err = 0; - int i; - - for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) { - err = ab3100_set_register_interruptible(ab3100, - ab3100_init_settings[i].abreg, - ab3100_init_settings[i].setting); - if (err) - goto exit_no_setup; - } - - /* - * Special trick to make the AB3100 use the 32kHz clock (RTC) - * bit 3 in test register 0x02 is a special, undocumented test - * register bit that only exist in AB3100 P1E - */ - if (ab3100->chip_id == 0xc4) { - dev_warn(ab3100->dev, - "AB3100 P1E variant detected forcing chip to 32KHz\n"); - err = ab3100_set_test_register_interruptible(ab3100, - 0x02, 0x08); - } - - exit_no_setup: - return err; -} - -/* The subdevices of the AB3100 */ -static struct mfd_cell ab3100_devs[] = { - { - .name = "ab3100-dac", - .id = -1, - }, - { - .name = "ab3100-leds", - .id = -1, - }, - { - .name = "ab3100-power", - .id = -1, - }, - { - .name = "ab3100-regulators", - .of_compatible = "stericsson,ab3100-regulators", - .id = -1, - }, - { - .name = "ab3100-sim", - .id = -1, - }, - { - .name = "ab3100-uart", - .id = -1, - }, - { - .name = "ab3100-rtc", - .id = -1, - }, - { - .name = "ab3100-charger", - .id = -1, - }, - { - .name = "ab3100-boost", - .id = -1, - }, - { - .name = "ab3100-adc", - .id = -1, - }, - { - .name = "ab3100-fuelgauge", - .id = -1, - }, - { - .name = "ab3100-vibrator", - .id = -1, - }, - { - .name = "ab3100-otp", - .id = -1, - }, - { - .name = "ab3100-codec", - .id = -1, - }, -}; - -struct ab_family_id { - u8 id; - char *name; -}; - -static const struct ab_family_id ids[] = { - /* AB3100 */ - { - .id = 0xc0, - .name = "P1A" - }, { - .id = 0xc1, - .name = "P1B" - }, { - .id = 0xc2, - .name = "P1C" - }, { - .id = 0xc3, - .name = "P1D" - }, { - .id = 0xc4, - .name = "P1E" - }, { - .id = 0xc5, - .name = "P1F/R1A" - }, { - .id = 0xc6, - .name = "P1G/R1A" - }, { - .id = 0xc7, - .name = "P2A/R2A" - }, { - .id = 0xc8, - .name = "P2B/R2B" - }, - /* AB3000 variants, not supported */ - { - .id = 0xa0 - }, { - .id = 0xa1 - }, { - .id = 0xa2 - }, { - .id = 0xa3 - }, { - .id = 0xa4 - }, { - .id = 0xa5 - }, { - .id = 0xa6 - }, { - .id = 0xa7 - }, - /* Terminator */ - { - .id = 0x00, - }, -}; - -static int ab3100_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct ab3100 *ab3100; - struct ab3100_platform_data *ab3100_plf_data = - dev_get_platdata(&client->dev); - int err; - int i; - - ab3100 = devm_kzalloc(&client->dev, sizeof(struct ab3100), GFP_KERNEL); - if (!ab3100) - return -ENOMEM; - - /* Initialize data structure */ - mutex_init(&ab3100->access_mutex); - BLOCKING_INIT_NOTIFIER_HEAD(&ab3100->event_subscribers); - - ab3100->i2c_client = client; - ab3100->dev = &ab3100->i2c_client->dev; - - i2c_set_clientdata(client, ab3100); - - /* Read chip ID register */ - err = ab3100_get_register_interruptible(ab3100, AB3100_CID, - &ab3100->chip_id); - if (err) { - dev_err(&client->dev, - "failed to communicate with AB3100 chip\n"); - goto exit_no_detect; - } - - for (i = 0; ids[i].id != 0x0; i++) { - if (ids[i].id == ab3100->chip_id) { - if (ids[i].name) - break; - - dev_err(&client->dev, "AB3000 is not supported\n"); - goto exit_no_detect; - } - } - - snprintf(&ab3100->chip_name[0], - sizeof(ab3100->chip_name) - 1, "AB3100 %s", ids[i].name); - - if (ids[i].id == 0x0) { - dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n", - ab3100->chip_id); - dev_err(&client->dev, - "accepting it anyway. Please update the driver.\n"); - goto exit_no_detect; - } - - dev_info(&client->dev, "Detected chip: %s\n", - &ab3100->chip_name[0]); - - /* Attach a second dummy i2c_client to the test register address */ - ab3100->testreg_client = i2c_new_dummy_device(client->adapter, - client->addr + 1); - if (IS_ERR(ab3100->testreg_client)) { - err = PTR_ERR(ab3100->testreg_client); - goto exit_no_testreg_client; - } - - err = ab3100_setup(ab3100); - if (err) - goto exit_no_setup; - - err = devm_request_threaded_irq(&client->dev, - client->irq, NULL, ab3100_irq_handler, - IRQF_ONESHOT, "ab3100-core", ab3100); - if (err) - goto exit_no_irq; - - err = abx500_register_ops(&client->dev, &ab3100_ops); - if (err) - goto exit_no_ops; - - /* Set up and register the platform devices. */ - for (i = 0; i < ARRAY_SIZE(ab3100_devs); i++) { - ab3100_devs[i].platform_data = ab3100_plf_data; - ab3100_devs[i].pdata_size = sizeof(struct ab3100_platform_data); - } - - err = mfd_add_devices(&client->dev, 0, ab3100_devs, - ARRAY_SIZE(ab3100_devs), NULL, 0, NULL); - - ab3100_setup_debugfs(ab3100); - - return 0; - - exit_no_ops: - exit_no_irq: - exit_no_setup: - i2c_unregister_device(ab3100->testreg_client); - exit_no_testreg_client: - exit_no_detect: - return err; -} - -static const struct i2c_device_id ab3100_id[] = { - { "ab3100", 0 }, - { } -}; - -static struct i2c_driver ab3100_driver = { - .driver = { - .name = "ab3100", - .suppress_bind_attrs = true, - }, - .id_table = ab3100_id, - .probe = ab3100_probe, -}; - -static int __init ab3100_i2c_init(void) -{ - return i2c_add_driver(&ab3100_driver); -} -subsys_initcall(ab3100_i2c_init); diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c deleted file mode 100644 index c393102e3a39..000000000000 --- a/drivers/mfd/ab3100-otp.c +++ /dev/null @@ -1,240 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * drivers/mfd/ab3100_otp.c - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * Driver to read out OTP from the AB3100 Mixed-signal circuit - * Author: Linus Walleij - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/* The OTP registers */ -#define AB3100_OTP0 0xb0 -#define AB3100_OTP1 0xb1 -#define AB3100_OTP2 0xb2 -#define AB3100_OTP3 0xb3 -#define AB3100_OTP4 0xb4 -#define AB3100_OTP5 0xb5 -#define AB3100_OTP6 0xb6 -#define AB3100_OTP7 0xb7 -#define AB3100_OTPP 0xbf - -/** - * struct ab3100_otp - * @dev: containing device - * @locked: whether the OTP is locked, after locking, no more bits - * can be changed but before locking it is still possible - * to change bits from 1->0. - * @freq: clocking frequency for the OTP, this frequency is either - * 32768Hz or 1MHz/30 - * @paf: product activation flag, indicates whether this is a real - * product (paf true) or a lab board etc (paf false) - * @imeich: if this is set it is possible to override the - * IMEI number found in the tac, fac and svn fields with - * (secured) software - * @cid: customer ID - * @tac: type allocation code of the IMEI - * @fac: final assembly code of the IMEI - * @svn: software version number of the IMEI - * @debugfs: a debugfs file used when dumping to file - */ -struct ab3100_otp { - struct device *dev; - bool locked; - u32 freq; - bool paf; - bool imeich; - u16 cid:14; - u32 tac:20; - u8 fac; - u32 svn:20; - struct dentry *debugfs; -}; - -static int __init ab3100_otp_read(struct ab3100_otp *otp) -{ - u8 otpval[8]; - u8 otpp; - int err; - - err = abx500_get_register_interruptible(otp->dev, 0, - AB3100_OTPP, &otpp); - if (err) { - dev_err(otp->dev, "unable to read OTPP register\n"); - return err; - } - - err = abx500_get_register_page_interruptible(otp->dev, 0, - AB3100_OTP0, otpval, 8); - if (err) { - dev_err(otp->dev, "unable to read OTP register page\n"); - return err; - } - - /* Cache OTP properties, they never change by nature */ - otp->locked = (otpp & 0x80); - otp->freq = (otpp & 0x40) ? 32768 : 34100; - otp->paf = (otpval[1] & 0x80); - otp->imeich = (otpval[1] & 0x40); - otp->cid = ((otpval[1] << 8) | otpval[0]) & 0x3fff; - otp->tac = ((otpval[4] & 0x0f) << 16) | (otpval[3] << 8) | otpval[2]; - otp->fac = ((otpval[5] & 0x0f) << 4) | (otpval[4] >> 4); - otp->svn = (otpval[7] << 12) | (otpval[6] << 4) | (otpval[5] >> 4); - return 0; -} - -/* - * This is a simple debugfs human-readable file that dumps out - * the contents of the OTP. - */ -#ifdef CONFIG_DEBUG_FS -static int ab3100_show_otp(struct seq_file *s, void *v) -{ - struct ab3100_otp *otp = s->private; - - seq_printf(s, "OTP is %s\n", otp->locked ? "LOCKED" : "UNLOCKED"); - seq_printf(s, "OTP clock switch startup is %uHz\n", otp->freq); - seq_printf(s, "PAF is %s\n", otp->paf ? "SET" : "NOT SET"); - seq_printf(s, "IMEI is %s\n", otp->imeich ? - "CHANGEABLE" : "NOT CHANGEABLE"); - seq_printf(s, "CID: 0x%04x (decimal: %d)\n", otp->cid, otp->cid); - seq_printf(s, "IMEI: %u-%u-%u\n", otp->tac, otp->fac, otp->svn); - return 0; -} - -static int ab3100_otp_open(struct inode *inode, struct file *file) -{ - return single_open(file, ab3100_show_otp, inode->i_private); -} - -static const struct file_operations ab3100_otp_operations = { - .open = ab3100_otp_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static void __init ab3100_otp_init_debugfs(struct device *dev, - struct ab3100_otp *otp) -{ - otp->debugfs = debugfs_create_file("ab3100_otp", S_IFREG | S_IRUGO, - NULL, otp, &ab3100_otp_operations); -} - -static void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp) -{ - debugfs_remove(otp->debugfs); -} -#else -/* Compile this out if debugfs not selected */ -static inline void __init ab3100_otp_init_debugfs(struct device *dev, - struct ab3100_otp *otp) -{ -} - -static inline void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp) -{ -} -#endif - -#define SHOW_AB3100_ATTR(name) \ -static ssize_t ab3100_otp_##name##_show(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{\ - struct ab3100_otp *otp = dev_get_drvdata(dev); \ - return sprintf(buf, "%u\n", otp->name); \ -} - -SHOW_AB3100_ATTR(locked) -SHOW_AB3100_ATTR(freq) -SHOW_AB3100_ATTR(paf) -SHOW_AB3100_ATTR(imeich) -SHOW_AB3100_ATTR(cid) -SHOW_AB3100_ATTR(fac) -SHOW_AB3100_ATTR(tac) -SHOW_AB3100_ATTR(svn) - -static struct device_attribute ab3100_otp_attrs[] = { - __ATTR(locked, S_IRUGO, ab3100_otp_locked_show, NULL), - __ATTR(freq, S_IRUGO, ab3100_otp_freq_show, NULL), - __ATTR(paf, S_IRUGO, ab3100_otp_paf_show, NULL), - __ATTR(imeich, S_IRUGO, ab3100_otp_imeich_show, NULL), - __ATTR(cid, S_IRUGO, ab3100_otp_cid_show, NULL), - __ATTR(fac, S_IRUGO, ab3100_otp_fac_show, NULL), - __ATTR(tac, S_IRUGO, ab3100_otp_tac_show, NULL), - __ATTR(svn, S_IRUGO, ab3100_otp_svn_show, NULL), -}; - -static int __init ab3100_otp_probe(struct platform_device *pdev) -{ - struct ab3100_otp *otp; - int err = 0; - int i; - - otp = devm_kzalloc(&pdev->dev, sizeof(struct ab3100_otp), GFP_KERNEL); - if (!otp) - return -ENOMEM; - - otp->dev = &pdev->dev; - - /* Replace platform data coming in with a local struct */ - platform_set_drvdata(pdev, otp); - - err = ab3100_otp_read(otp); - if (err) - return err; - - dev_info(&pdev->dev, "AB3100 OTP readout registered\n"); - - /* sysfs entries */ - for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) { - err = device_create_file(&pdev->dev, - &ab3100_otp_attrs[i]); - if (err) - goto err; - } - - /* debugfs entries */ - ab3100_otp_init_debugfs(&pdev->dev, otp); - - return 0; - -err: - while (--i >= 0) - device_remove_file(&pdev->dev, &ab3100_otp_attrs[i]); - return err; -} - -static int __exit ab3100_otp_remove(struct platform_device *pdev) -{ - struct ab3100_otp *otp = platform_get_drvdata(pdev); - int i; - - for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) - device_remove_file(&pdev->dev, - &ab3100_otp_attrs[i]); - ab3100_otp_exit_debugfs(otp); - return 0; -} - -static struct platform_driver ab3100_otp_driver = { - .driver = { - .name = "ab3100-otp", - }, - .remove = __exit_p(ab3100_otp_remove), -}; - -module_platform_driver_probe(ab3100_otp_driver, ab3100_otp_probe); - -MODULE_AUTHOR("Linus Walleij "); -MODULE_DESCRIPTION("AB3100 OTP Readout Driver"); -MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/ab3100.h deleted file mode 100644 index a881d8495186..000000000000 --- a/include/linux/mfd/ab3100.h +++ /dev/null @@ -1,128 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2007-2009 ST-Ericsson AB - * AB3100 core access functions - * Author: Linus Walleij - */ - -#include - -struct device; - -#ifndef MFD_AB3100_H -#define MFD_AB3100_H - - -#define AB3100_P1A 0xc0 -#define AB3100_P1B 0xc1 -#define AB3100_P1C 0xc2 -#define AB3100_P1D 0xc3 -#define AB3100_P1E 0xc4 -#define AB3100_P1F 0xc5 -#define AB3100_P1G 0xc6 -#define AB3100_R2A 0xc7 -#define AB3100_R2B 0xc8 - -/* - * AB3100, EVENTA1, A2 and A3 event register flags - * these are catenated into a single 32-bit flag in the code - * for event notification broadcasts. - */ -#define AB3100_EVENTA1_ONSWA (0x01<<16) -#define AB3100_EVENTA1_ONSWB (0x02<<16) -#define AB3100_EVENTA1_ONSWC (0x04<<16) -#define AB3100_EVENTA1_DCIO (0x08<<16) -#define AB3100_EVENTA1_OVER_TEMP (0x10<<16) -#define AB3100_EVENTA1_SIM_OFF (0x20<<16) -#define AB3100_EVENTA1_VBUS (0x40<<16) -#define AB3100_EVENTA1_VSET_USB (0x80<<16) - -#define AB3100_EVENTA2_READY_TX (0x01<<8) -#define AB3100_EVENTA2_READY_RX (0x02<<8) -#define AB3100_EVENTA2_OVERRUN_ERROR (0x04<<8) -#define AB3100_EVENTA2_FRAMING_ERROR (0x08<<8) -#define AB3100_EVENTA2_CHARG_OVERCURRENT (0x10<<8) -#define AB3100_EVENTA2_MIDR (0x20<<8) -#define AB3100_EVENTA2_BATTERY_REM (0x40<<8) -#define AB3100_EVENTA2_ALARM (0x80<<8) - -#define AB3100_EVENTA3_ADC_TRIG5 (0x01) -#define AB3100_EVENTA3_ADC_TRIG4 (0x02) -#define AB3100_EVENTA3_ADC_TRIG3 (0x04) -#define AB3100_EVENTA3_ADC_TRIG2 (0x08) -#define AB3100_EVENTA3_ADC_TRIGVBAT (0x10) -#define AB3100_EVENTA3_ADC_TRIGVTX (0x20) -#define AB3100_EVENTA3_ADC_TRIG1 (0x40) -#define AB3100_EVENTA3_ADC_TRIG0 (0x80) - -/* AB3100, STR register flags */ -#define AB3100_STR_ONSWA (0x01) -#define AB3100_STR_ONSWB (0x02) -#define AB3100_STR_ONSWC (0x04) -#define AB3100_STR_DCIO (0x08) -#define AB3100_STR_BOOT_MODE (0x10) -#define AB3100_STR_SIM_OFF (0x20) -#define AB3100_STR_BATT_REMOVAL (0x40) -#define AB3100_STR_VBUS (0x80) - -/* - * AB3100 contains 8 regulators, one external regulator controller - * and a buck converter, further the LDO E and buck converter can - * have separate settings if they are in sleep mode, this is - * modeled as a separate regulator. - */ -#define AB3100_NUM_REGULATORS 10 - -/** - * struct ab3100 - * @access_mutex: lock out concurrent accesses to the AB3100 registers - * @dev: pointer to the containing device - * @i2c_client: I2C client for this chip - * @testreg_client: secondary client for test registers - * @chip_name: name of this chip variant - * @chip_id: 8 bit chip ID for this chip variant - * @event_subscribers: event subscribers are listed here - * @startup_events: a copy of the first reading of the event registers - * @startup_events_read: whether the first events have been read - * - * This struct is PRIVATE and devices using it should NOT - * access ANY fields. It is used as a token for calling the - * AB3100 functions. - */ -struct ab3100 { - struct mutex access_mutex; - struct device *dev; - struct i2c_client *i2c_client; - struct i2c_client *testreg_client; - char chip_name[32]; - u8 chip_id; - struct blocking_notifier_head event_subscribers; - u8 startup_events[3]; - bool startup_events_read; -}; - -/** - * struct ab3100_platform_data - * Data supplied to initialize board connections to the AB3100 - * @reg_constraints: regulator constraints for target board - * the order of these constraints are: LDO A, C, D, E, - * F, G, H, K, EXT and BUCK. - * @reg_initvals: initial values for the regulator registers - * plus two sleep settings for LDO E and the BUCK converter. - * exactly AB3100_NUM_REGULATORS+2 values must be sent in. - * Order: LDO A, C, E, E sleep, F, G, H, K, EXT, BUCK, - * BUCK sleep, LDO D. (LDO D need to be initialized last.) - * @external_voltage: voltage level of the external regulator. - */ -struct ab3100_platform_data { - struct regulator_init_data reg_constraints[AB3100_NUM_REGULATORS]; - u8 reg_initvals[AB3100_NUM_REGULATORS+2]; - int external_voltage; -}; - -int ab3100_event_register(struct ab3100 *ab3100, - struct notifier_block *nb); -int ab3100_event_unregister(struct ab3100 *ab3100, - struct notifier_block *nb); - -#endif /* MFD_AB3100_H */ -- cgit v1.2.3