From f436f8bb73138bc74eb1c6527723e00988ad8a8a Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 1 Oct 2009 16:14:32 +0200
Subject: x86: EDAC: MCE: Fix MCE decoding callback logic

Make decoding of MCEs happen only on AMD hardware by registering a
non-default callback only on CPU families which support it.

While looking at the interaction of decode_mce() with the other MCE
code i also noticed a few other things and made the following
cleanups/fixes:

 - Fixed the mce_decode() weak alias - a weak alias is really not
   good here, it should be a proper callback. A weak alias will be
   overriden if a piece of code is built into the kernel - not
   good, obviously.

 - The patch initializes the callback on AMD family 10h and 11h.

 - Added the more correct fallback printk of:

	No support for human readable MCE decoding on this CPU type.
	Transcribe the message and run it through 'mcelog --ascii' to decode.

   On CPUs that dont have a decoder.

 - Made the surrounding code more readable.

Note that the callback allows us to have a default fallback -
without having to check the CPU versions during the printout
itself. When an EDAC module registers itself, it can install the
decode-print function.

(there's no unregister needed as this is core code.)

version -v2 by Borislav Petkov:

 - add K8 to the set of supported CPUs

 - always build in edac_mce_amd since we use an early_initcall now

 - fix checkpatch warnings

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <20091001141432.GA11410@aftab>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 drivers/edac/Makefile       |  2 +-
 drivers/edac/edac_mce_amd.c | 15 ++++++++++++++-
 2 files changed, 15 insertions(+), 2 deletions(-)

(limited to 'drivers/edac')

diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 7a473bbe8abd..8701cd7ce4e3 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -18,7 +18,7 @@ edac_core-objs	+= edac_pci.o edac_pci_sysfs.o
 endif
 
 ifdef CONFIG_CPU_SUP_AMD
-edac_core-objs  += edac_mce_amd.o
+obj-$(CONFIG_X86_MCE)			+= edac_mce_amd.o
 endif
 
 obj-$(CONFIG_EDAC_AMD76X)		+= amd76x_edac.o
diff --git a/drivers/edac/edac_mce_amd.c b/drivers/edac/edac_mce_amd.c
index 0c21c370c9dd..83a01a1187d7 100644
--- a/drivers/edac/edac_mce_amd.c
+++ b/drivers/edac/edac_mce_amd.c
@@ -362,7 +362,7 @@ static inline void amd_decode_err_code(unsigned int ec)
 		pr_warning("Huh? Unknown MCE error 0x%x\n", ec);
 }
 
-void decode_mce(struct mce *m)
+static void amd_decode_mce(struct mce *m)
 {
 	struct err_regs regs;
 	int node, ecc;
@@ -420,3 +420,16 @@ void decode_mce(struct mce *m)
 
 	amd_decode_err_code(m->status & 0xffff);
 }
+
+static int __init mce_amd_init(void)
+{
+	/*
+	 * We can decode MCEs for Opteron and later CPUs:
+	 */
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
+	    (boot_cpu_data.x86 >= 0xf))
+		x86_mce_decode_callback = amd_decode_mce;
+
+	return 0;
+}
+early_initcall(mce_amd_init);
-- 
cgit v1.2.3


From 0d18b2e34bd1ad8f5bd3f3a17b5e7df132e511a9 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Fri, 2 Oct 2009 15:31:48 +0200
Subject: x86: EDAC: carve out AMD MCE decoding logic

This converts the MCE decoding logic into a standalone config
option which can be built-in or a module, the first one being the
default for MCEs happening early on in the boot process.

This, beyond being separated in a cleaner way, also saves RAM by
making the decoding logic modular.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <20091002133148.GD28682@aftab>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 drivers/edac/Kconfig        | 14 +++++++++++++-
 drivers/edac/Makefile       |  5 +----
 drivers/edac/edac_mce_amd.c | 19 ++++++++++++++++++-
 3 files changed, 32 insertions(+), 6 deletions(-)

(limited to 'drivers/edac')

diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 02127e59fe8e..55c9c59b3f71 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -47,6 +47,18 @@ config EDAC_DEBUG_VERBOSE
 	  Source file name and line number where debugging message
 	  printed will be added to debugging message.
 
+ config EDAC_DECODE_MCE
+	tristate "Decode MCEs in human-readable form (only on AMD for now)"
+	depends on CPU_SUP_AMD && X86_MCE
+	default y
+	---help---
+	  Enable this option if you want to decode Machine Check Exceptions
+	  occuring on your machine in human-readable form.
+
+	  You should definitely say Y here in case you want to decode MCEs
+	  which occur really early upon boot, before the module infrastructure
+	  has been initialized.
+
 config EDAC_MM_EDAC
 	tristate "Main Memory EDAC (Error Detection And Correction) reporting"
 	help
@@ -59,7 +71,7 @@ config EDAC_MM_EDAC
 
 config EDAC_AMD64
 	tristate "AMD64 (Opteron, Athlon64) K8, F10h, F11h"
-	depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI && CPU_SUP_AMD
+	depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI && EDAC_DECODE_MCE
 	help
 	  Support for error detection and correction on the AMD 64
 	  Families of Memory Controllers (K8, F10h and F11h)
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 8701cd7ce4e3..bc5dc232a0fb 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -6,7 +6,6 @@
 # GNU General Public License.
 #
 
-
 obj-$(CONFIG_EDAC)			:= edac_stub.o
 obj-$(CONFIG_EDAC_MM_EDAC)		+= edac_core.o
 
@@ -17,9 +16,7 @@ ifdef CONFIG_PCI
 edac_core-objs	+= edac_pci.o edac_pci_sysfs.o
 endif
 
-ifdef CONFIG_CPU_SUP_AMD
-obj-$(CONFIG_X86_MCE)			+= edac_mce_amd.o
-endif
+obj-$(CONFIG_EDAC_DECODE_MCE)		+= edac_mce_amd.o
 
 obj-$(CONFIG_EDAC_AMD76X)		+= amd76x_edac.o
 obj-$(CONFIG_EDAC_CPC925)		+= cpc925_edac.o
diff --git a/drivers/edac/edac_mce_amd.c b/drivers/edac/edac_mce_amd.c
index 83a01a1187d7..713ed7d37247 100644
--- a/drivers/edac/edac_mce_amd.c
+++ b/drivers/edac/edac_mce_amd.c
@@ -3,6 +3,7 @@
 
 static bool report_gart_errors;
 static void (*nb_bus_decoder)(int node_id, struct err_regs *regs);
+static void (*orig_mce_callback)(struct mce *m);
 
 void amd_report_gart_errors(bool v)
 {
@@ -427,9 +428,25 @@ static int __init mce_amd_init(void)
 	 * We can decode MCEs for Opteron and later CPUs:
 	 */
 	if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
-	    (boot_cpu_data.x86 >= 0xf))
+	    (boot_cpu_data.x86 >= 0xf)) {
+		/* safe the default decode mce callback */
+		orig_mce_callback = x86_mce_decode_callback;
+
 		x86_mce_decode_callback = amd_decode_mce;
+	}
 
 	return 0;
 }
 early_initcall(mce_amd_init);
+
+#ifdef MODULE
+static void __exit mce_amd_exit(void)
+{
+	x86_mce_decode_callback = orig_mce_callback;
+}
+
+MODULE_DESCRIPTION("AMD MCE decoder");
+MODULE_ALIAS("edac-mce-amd");
+MODULE_LICENSE("GPL");
+module_exit(mce_amd_exit);
+#endif
-- 
cgit v1.2.3


From 3011b20da9d60b8168ead403e6aa860d0d8d11e4 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Mon, 21 Sep 2009 13:23:34 +0200
Subject: amd64_edac: fix driver instance lookup table allocation

Allocate memory statically for 8-node machines max for simplicity
instead of relying on MAX_NUMNODES which is 0 on !CONFIG_NUMA builds.

Spotted by Jan Beulich.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 drivers/edac/amd64_edac.c | 4 ++--
 drivers/edac/amd64_edac.h | 2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/edac')

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 4e551e63b6dc..d6186460c846 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -15,8 +15,8 @@ module_param(ecc_enable_override, int, 0644);
 
 /* Lookup table for all possible MC control instances */
 struct amd64_pvt;
-static struct mem_ctl_info *mci_lookup[MAX_NUMNODES];
-static struct amd64_pvt *pvt_lookup[MAX_NUMNODES];
+static struct mem_ctl_info *mci_lookup[EDAC_MAX_NUMNODES];
+static struct amd64_pvt *pvt_lookup[EDAC_MAX_NUMNODES];
 
 /*
  * See F2x80 for K8 and F2x[1,0]80 for Fam10 and later. The table below is only
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 8ea07e2715dc..c3f769e017fa 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -132,6 +132,8 @@
 #define EDAC_AMD64_VERSION		" Ver: 3.2.0 " __DATE__
 #define EDAC_MOD_STR			"amd64_edac"
 
+#define EDAC_MAX_NUMNODES		8
+
 /* Extended Model from CPUID, for CPU Revision numbers */
 #define OPTERON_CPU_LE_REV_C		0
 #define OPTERON_CPU_REV_D		1
-- 
cgit v1.2.3


From 916d11b2b52430576fd4e96138c974cd64f9cfd6 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Fri, 18 Sep 2009 12:12:46 +0200
Subject: amd64_edac: fix DRAM base and limit address extraction

K8 DRAM base and limit addresses from F1x40 +8*i and F1x44 + 8*i, where
i in (0..7) are both bits 39-24 and therefore the shifting should be
done by 24 and not by 8.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 drivers/edac/amd64_edac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/edac')

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index d6186460c846..6e2ccce225db 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1130,7 +1130,7 @@ static void k8_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 		debugf0("Reading K8_DRAM_BASE_LOW failed\n");
 
 	/* Extract parts into separate data entries */
-	pvt->dram_base[dram] = ((u64) low & 0xFFFF0000) << 8;
+	pvt->dram_base[dram] = ((u64) low & 0xFFFF0000) << 24;
 	pvt->dram_IntlvEn[dram] = (low >> 8) & 0x7;
 	pvt->dram_rw_en[dram] = (low & 0x3);
 
@@ -1143,7 +1143,7 @@ static void k8_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 	 * Extract parts into separate data entries. Limit is the HIGHEST memory
 	 * location of the region, so lower 24 bits need to be all ones
 	 */
-	pvt->dram_limit[dram] = (((u64) low & 0xFFFF0000) << 8) | 0x00FFFFFF;
+	pvt->dram_limit[dram] = (((u64) low & 0xFFFF0000) << 24) | 0x00FFFFFF;
 	pvt->dram_IntlvSel[dram] = (low >> 8) & 0x7;
 	pvt->dram_DstNode[dram] = (low & 0x7);
 }
-- 
cgit v1.2.3


From 72f158fe6fc2033ceb0f3e0e9e5c2aa356fed6da Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Fri, 18 Sep 2009 12:27:27 +0200
Subject: amd64_edac: fix interleave enable tests

The pvt->dram_IntlvEn saves the 3 "Interleave Enable" bits already
right-shifted by 8 so the check in find_mc_by_sys_addr() by shifting the
values to the left 8 bits is wrong.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 drivers/edac/amd64_edac.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/edac')

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 6e2ccce225db..854c7c125035 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -289,12 +289,12 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci,
 		goto found;
 	}
 
-	if (unlikely((intlv_en != (0x01 << 8)) &&
-		     (intlv_en != (0x03 << 8)) &&
-		     (intlv_en != (0x07 << 8)))) {
+	if (unlikely((intlv_en != 0x01) &&
+		     (intlv_en != 0x03) &&
+		     (intlv_en != 0x07))) {
 		amd64_printk(KERN_WARNING, "junk value of 0x%x extracted from "
 			     "IntlvEn field of DRAM Base Register for node 0: "
-			     "This probably indicates a BIOS bug.\n", intlv_en);
+			     "this probably indicates a BIOS bug.\n", intlv_en);
 		return NULL;
 	}
 
-- 
cgit v1.2.3


From 8edc5445895dbcf050d6e8ac5488f70a3937753a Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Fri, 18 Sep 2009 12:39:19 +0200
Subject: amd64_edac: fix K8 intlv_sel check

The check when DRAM interleaving is enabled should be done against the
pvt->dram_IntlvSel field and not against the ->dram_limit.

Simplify first loop and fixup printk formatting while at it.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 drivers/edac/amd64_edac.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

(limited to 'drivers/edac')

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 854c7c125035..2c869d1fe334 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -279,14 +279,11 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci,
 	intlv_en = pvt->dram_IntlvEn[0];
 
 	if (intlv_en == 0) {
-		for (node_id = 0; ; ) {
+		for (node_id = 0; node_id < DRAM_REG_COUNT; node_id++) {
 			if (amd64_base_limit_match(pvt, sys_addr, node_id))
-				break;
-
-			if (++node_id >= DRAM_REG_COUNT)
-				goto err_no_match;
+				goto found;
 		}
-		goto found;
+		goto err_no_match;
 	}
 
 	if (unlikely((intlv_en != 0x01) &&
@@ -301,7 +298,7 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci,
 	bits = (((u32) sys_addr) >> 12) & intlv_en;
 
 	for (node_id = 0; ; ) {
-		if ((pvt->dram_limit[node_id] & intlv_en) == bits)
+		if ((pvt->dram_IntlvSel[node_id] & intlv_en) == bits)
 			break;	/* intlv_sel field matches */
 
 		if (++node_id >= DRAM_REG_COUNT)
@@ -311,10 +308,10 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci,
 	/* sanity test for sys_addr */
 	if (unlikely(!amd64_base_limit_match(pvt, sys_addr, node_id))) {
 		amd64_printk(KERN_WARNING,
-			  "%s(): sys_addr 0x%lx falls outside base/limit "
-			  "address range for node %d with node interleaving "
-			  "enabled.\n", __func__, (unsigned long)sys_addr,
-			  node_id);
+			     "%s(): sys_addr 0x%llx falls outside base/limit "
+			     "address range for node %d with node interleaving "
+			     "enabled.\n",
+			     __func__, sys_addr, node_id);
 		return NULL;
 	}
 
-- 
cgit v1.2.3


From 2cff18c22cfaa88216a5d8c62ea64d1fb575c145 Mon Sep 17 00:00:00 2001
From: Keith Mannthey <kmannth@us.ibm.com>
Date: Fri, 18 Sep 2009 14:35:23 +0200
Subject: amd64_edac: simple fix to allow reporting of CECC errors

This allows the errors to be further decoded and mapped to csrows.
Tested with ECC debug dimms and an Rev F cpu based system.

Signed-off-by: Keith Mannthey <kmannth@us.ibm.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 drivers/edac/amd64_edac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/edac')

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 2c869d1fe334..ecc86c300e2b 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1190,7 +1190,7 @@ static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
 	 * different from the node that detected the error.
 	 */
 	src_mci = find_mc_by_sys_addr(mci, SystemAddress);
-	if (src_mci) {
+	if (!src_mci) {
 		amd64_mc_printk(mci, KERN_ERR,
 			     "failed to map error address 0x%lx to a node\n",
 			     (unsigned long)SystemAddress);
-- 
cgit v1.2.3


From 9d858bb10a9907bbbaffbb4a80a31718d548868c Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Mon, 21 Sep 2009 14:35:51 +0200
Subject: amd64_edac: fix chip select handling

Different processor families support a different number of chip selects.
Handle this in a family-dependent way with the proper values assigned at
init time (see amd64_set_dct_base_and_mask).

Remove _DCSM_COUNT defines since they're used at one place and originate
from public documentation.

CC: Keith Mannthey <kmannth@us.ibm.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 drivers/edac/amd64_edac.c | 57 +++++++++++++++++++++--------------------------
 drivers/edac/amd64_edac.h | 15 +++++--------
 2 files changed, 32 insertions(+), 40 deletions(-)

(limited to 'drivers/edac')

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index ecc86c300e2b..85c308b1fed7 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -189,7 +189,10 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
 /* Map from a CSROW entry to the mask entry that operates on it */
 static inline u32 amd64_map_to_dcs_mask(struct amd64_pvt *pvt, int csrow)
 {
-	return csrow >> (pvt->num_dcsm >> 3);
+	if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_F)
+		return csrow;
+	else
+		return csrow >> 1;
 }
 
 /* return the 'base' address the i'th CS entry of the 'dct' DRAM controller */
@@ -374,7 +377,7 @@ static int input_addr_to_csrow(struct mem_ctl_info *mci, u64 input_addr)
 	 * base/mask register pair, test the condition shown near the start of
 	 * section 3.5.4 (p. 84, BKDG #26094, K8, revA-E).
 	 */
-	for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) {
+	for (csrow = 0; csrow < pvt->cs_count; csrow++) {
 
 		/* This DRAM chip select is disabled on this node */
 		if ((pvt->dcsb0[csrow] & K8_DCSB_CS_ENABLE) == 0)
@@ -731,7 +734,7 @@ static void find_csrow_limits(struct mem_ctl_info *mci, int csrow,
 	u64 base, mask;
 
 	pvt = mci->pvt_info;
-	BUG_ON((csrow < 0) || (csrow >= CHIPSELECT_COUNT));
+	BUG_ON((csrow < 0) || (csrow >= pvt->cs_count));
 
 	base = base_from_dct_base(pvt, csrow);
 	mask = mask_from_dct_mask(pvt, csrow);
@@ -959,35 +962,27 @@ err_reg:
  */
 static void amd64_set_dct_base_and_mask(struct amd64_pvt *pvt)
 {
-	if (pvt->ext_model >= OPTERON_CPU_REV_F) {
+
+	if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_F) {
+		pvt->dcsb_base		= REV_E_DCSB_BASE_BITS;
+		pvt->dcsm_mask		= REV_E_DCSM_MASK_BITS;
+		pvt->dcs_mask_notused	= REV_E_DCS_NOTUSED_BITS;
+		pvt->dcs_shift		= REV_E_DCS_SHIFT;
+		pvt->cs_count		= 8;
+		pvt->num_dcsm		= 8;
+	} else {
 		pvt->dcsb_base		= REV_F_F1Xh_DCSB_BASE_BITS;
 		pvt->dcsm_mask		= REV_F_F1Xh_DCSM_MASK_BITS;
 		pvt->dcs_mask_notused	= REV_F_F1Xh_DCS_NOTUSED_BITS;
 		pvt->dcs_shift		= REV_F_F1Xh_DCS_SHIFT;
 
-		switch (boot_cpu_data.x86) {
-		case 0xf:
-			pvt->num_dcsm = REV_F_DCSM_COUNT;
-			break;
-
-		case 0x10:
-			pvt->num_dcsm = F10_DCSM_COUNT;
-			break;
-
-		case 0x11:
-			pvt->num_dcsm = F11_DCSM_COUNT;
-			break;
-
-		default:
-			amd64_printk(KERN_ERR, "Unsupported family!\n");
-			break;
+		if (boot_cpu_data.x86 == 0x11) {
+			pvt->cs_count = 4;
+			pvt->num_dcsm = 2;
+		} else {
+			pvt->cs_count = 8;
+			pvt->num_dcsm = 4;
 		}
-	} else {
-		pvt->dcsb_base		= REV_E_DCSB_BASE_BITS;
-		pvt->dcsm_mask		= REV_E_DCSM_MASK_BITS;
-		pvt->dcs_mask_notused	= REV_E_DCS_NOTUSED_BITS;
-		pvt->dcs_shift		= REV_E_DCS_SHIFT;
-		pvt->num_dcsm		= REV_E_DCSM_COUNT;
 	}
 }
 
@@ -1000,7 +995,7 @@ static void amd64_read_dct_base_mask(struct amd64_pvt *pvt)
 
 	amd64_set_dct_base_and_mask(pvt);
 
-	for (cs = 0; cs < CHIPSELECT_COUNT; cs++) {
+	for (cs = 0; cs < pvt->cs_count; cs++) {
 		reg = K8_DCSB0 + (cs * 4);
 		err = pci_read_config_dword(pvt->dram_f2_ctl, reg,
 						&pvt->dcsb0[cs]);
@@ -1563,7 +1558,7 @@ static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs)
 
 	debugf1("InputAddr=0x%x  channelselect=%d\n", in_addr, cs);
 
-	for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) {
+	for (csrow = 0; csrow < pvt->cs_count; csrow++) {
 
 		cs_base = amd64_get_dct_base(pvt, cs, csrow);
 		if (!(cs_base & K8_DCSB_CS_ENABLE))
@@ -2494,7 +2489,7 @@ err_reg:
  * NOTE: CPU Revision Dependent code
  *
  * Input:
- *	@csrow_nr ChipSelect Row Number (0..CHIPSELECT_COUNT-1)
+ *	@csrow_nr ChipSelect Row Number (0..pvt->cs_count-1)
  *	k8 private pointer to -->
  *			DRAM Bank Address mapping register
  *			node_id
@@ -2574,7 +2569,7 @@ static int amd64_init_csrows(struct mem_ctl_info *mci)
 		(pvt->nbcfg & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled"
 		);
 
-	for (i = 0; i < CHIPSELECT_COUNT; i++) {
+	for (i = 0; i < pvt->cs_count; i++) {
 		csrow = &mci->csrows[i];
 
 		if ((pvt->dcsb0[i] & K8_DCSB_CS_ENABLE) == 0) {
@@ -2985,7 +2980,7 @@ static int amd64_init_2nd_stage(struct amd64_pvt *pvt)
 		goto err_exit;
 
 	ret = -ENOMEM;
-	mci = edac_mc_alloc(0, CHIPSELECT_COUNT, pvt->channel_count, node_id);
+	mci = edac_mc_alloc(0, pvt->cs_count, pvt->channel_count, node_id);
 	if (!mci)
 		goto err_exit;
 
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index c3f769e017fa..64193927a05a 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -144,7 +144,7 @@
 #define OPTERON_CPU_REV_FA		5
 
 /* Hardware limit on ChipSelect rows per MC and processors per system */
-#define CHIPSELECT_COUNT		8
+#define MAX_CS_COUNT			8
 #define DRAM_REG_COUNT			8
 
 
@@ -195,7 +195,6 @@
  */
 #define REV_E_DCSB_BASE_BITS		(0xFFE0FE00ULL)
 #define REV_E_DCS_SHIFT			4
-#define REV_E_DCSM_COUNT		8
 
 #define REV_F_F1Xh_DCSB_BASE_BITS	(0x1FF83FE0ULL)
 #define REV_F_F1Xh_DCS_SHIFT		8
@@ -206,9 +205,6 @@
  */
 #define REV_F_DCSB_BASE_BITS		(0x1FF83FE0ULL)
 #define REV_F_DCS_SHIFT			8
-#define REV_F_DCSM_COUNT		4
-#define F10_DCSM_COUNT			4
-#define F11_DCSM_COUNT			2
 
 /* DRAM CS Mask Registers */
 #define K8_DCSM0			0x60
@@ -447,12 +443,12 @@ struct amd64_pvt {
 	u32 dbam1;		/* DRAM Base Address Mapping reg for DCT1 */
 
 	/* DRAM CS Base Address Registers F2x[1,0][5C:40] */
-	u32 dcsb0[CHIPSELECT_COUNT];
-	u32 dcsb1[CHIPSELECT_COUNT];
+	u32 dcsb0[MAX_CS_COUNT];
+	u32 dcsb1[MAX_CS_COUNT];
 
 	/* DRAM CS Mask Registers F2x[1,0][6C:60] */
-	u32 dcsm0[CHIPSELECT_COUNT];
-	u32 dcsm1[CHIPSELECT_COUNT];
+	u32 dcsm0[MAX_CS_COUNT];
+	u32 dcsm1[MAX_CS_COUNT];
 
 	/*
 	 * Decoded parts of DRAM BASE and LIMIT Registers
@@ -472,6 +468,7 @@ struct amd64_pvt {
 	 */
 	u32 dcsb_base;		/* DCSB base bits */
 	u32 dcsm_mask;		/* DCSM mask bits */
+	u32 cs_count;		/* num chip selects (== num DCSB registers) */
 	u32 num_dcsm;		/* Number of DCSM registers */
 	u32 dcs_mask_notused;	/* DCSM notused mask bits */
 	u32 dcs_shift;		/* DCSB and DCSM shift value */
-- 
cgit v1.2.3


From 66216a7a15e75d517dddd0ac6514924b15071e4c Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Tue, 22 Sep 2009 16:48:37 +0200
Subject: amd64_edac: fix DRAM base and limit extraction

On Fam10h and above, F1x[1, 0][7C:40] are DRAM Base/Limit registers
which specify the destination node of a DRAM address. Those address
boundaries are being extracted into ->dram_base[] and ->dram_limit[].
Correct the extraction masks to match the respective address bits.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 drivers/edac/amd64_edac.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/edac')

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 85c308b1fed7..4f4ac82382f7 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1368,8 +1368,8 @@ static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 
 	pvt->dram_IntlvEn[dram] = (low_base >> 8) & 0x7;
 
-	pvt->dram_base[dram] = (((((u64) high_base & 0x000000FF) << 32) |
-				((u64) low_base & 0xFFFF0000))) << 8;
+	pvt->dram_base[dram] = (((u64)high_base & 0x000000FF) << 40) |
+			       (((u64)low_base  & 0xFFFF0000) << 24);
 
 	low_offset = K8_DRAM_LIMIT_LOW + (dram << 3);
 	high_offset = F10_DRAM_LIMIT_HIGH + (dram << 3);
@@ -1390,9 +1390,9 @@ static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 	 * Extract address values and form a LIMIT address. Limit is the HIGHEST
 	 * memory location of the region, so low 24 bits need to be all ones.
 	 */
-	low_limit |= 0x0000FFFF;
-	pvt->dram_limit[dram] =
-		((((u64) high_limit << 32) + (u64) low_limit) << 8) | (0xFF);
+	pvt->dram_limit[dram] = (((u64)high_limit & 0x000000FF) << 40) |
+				(((u64) low_limit & 0xFFFF0000) << 24) |
+				0x00FFFFFF;
 }
 
 static void f10_read_dram_ctl_register(struct amd64_pvt *pvt)
-- 
cgit v1.2.3


From 94baaee4947d84809b289d5ca03677525ffc6da9 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Thu, 24 Sep 2009 11:05:30 +0200
Subject: amd64_edac: beef up DRAM error injection

When injecting DRAM ECC errors (F3xBC_x8), EccVector[15:0] is a bitmask
of which bits should be error injected when written to and holds the
payload of 16-bit DRAM word when read, respectively.

Add /sysfs members to show the DRAM ECC section/word/vector.

Fail wrong injection values entered over /sysfs instead of truncating
them.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 drivers/edac/amd64_edac.h     |  6 ++----
 drivers/edac/amd64_edac_inj.c | 49 +++++++++++++++++++++++++++++++++++++------
 2 files changed, 45 insertions(+), 10 deletions(-)

(limited to 'drivers/edac')

diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 64193927a05a..c6f359a85207 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -372,13 +372,11 @@ enum {
 
 #define SET_NB_DRAM_INJECTION_WRITE(word, bits)  \
 					(BIT(((word) & 0xF) + 20) | \
-					BIT(17) |  \
-					((bits) & 0xF))
+					BIT(17) | bits)
 
 #define SET_NB_DRAM_INJECTION_READ(word, bits)  \
 					(BIT(((word) & 0xF) + 20) | \
-					BIT(16) |  \
-					((bits) & 0xF))
+					BIT(16) |  bits)
 
 #define K8_NBCAP			0xE8
 #define K8_NBCAP_CORES			(BIT(12)|BIT(13))
diff --git a/drivers/edac/amd64_edac_inj.c b/drivers/edac/amd64_edac_inj.c
index d3675b76b3a7..29f1f7a612d9 100644
--- a/drivers/edac/amd64_edac_inj.c
+++ b/drivers/edac/amd64_edac_inj.c
@@ -1,5 +1,11 @@
 #include "amd64_edac.h"
 
+static ssize_t amd64_inject_section_show(struct mem_ctl_info *mci, char *buf)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	return sprintf(buf, "0x%x\n", pvt->injection.section);
+}
+
 /*
  * store error injection section value which refers to one of 4 16-byte sections
  * within a 64-byte cacheline
@@ -15,12 +21,26 @@ static ssize_t amd64_inject_section_store(struct mem_ctl_info *mci,
 
 	ret = strict_strtoul(data, 10, &value);
 	if (ret != -EINVAL) {
+
+		if (value > 3) {
+			amd64_printk(KERN_WARNING,
+				     "%s: invalid section 0x%lx\n",
+				     __func__, value);
+			return -EINVAL;
+		}
+
 		pvt->injection.section = (u32) value;
 		return count;
 	}
 	return ret;
 }
 
+static ssize_t amd64_inject_word_show(struct mem_ctl_info *mci, char *buf)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	return sprintf(buf, "0x%x\n", pvt->injection.word);
+}
+
 /*
  * store error injection word value which refers to one of 9 16-bit word of the
  * 16-byte (128-bit + ECC bits) section
@@ -37,14 +57,25 @@ static ssize_t amd64_inject_word_store(struct mem_ctl_info *mci,
 	ret = strict_strtoul(data, 10, &value);
 	if (ret != -EINVAL) {
 
-		value = (value <= 8) ? value : 0;
-		pvt->injection.word = (u32) value;
+		if (value > 8) {
+			amd64_printk(KERN_WARNING,
+				     "%s: invalid word 0x%lx\n",
+				     __func__, value);
+			return -EINVAL;
+		}
 
+		pvt->injection.word = (u32) value;
 		return count;
 	}
 	return ret;
 }
 
+static ssize_t amd64_inject_ecc_vector_show(struct mem_ctl_info *mci, char *buf)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	return sprintf(buf, "0x%x\n", pvt->injection.bit_map);
+}
+
 /*
  * store 16 bit error injection vector which enables injecting errors to the
  * corresponding bit within the error injection word above. When used during a
@@ -60,8 +91,14 @@ static ssize_t amd64_inject_ecc_vector_store(struct mem_ctl_info *mci,
 	ret = strict_strtoul(data, 16, &value);
 	if (ret != -EINVAL) {
 
-		pvt->injection.bit_map = (u32) value & 0xFFFF;
+		if (value & 0xFFFF0000) {
+			amd64_printk(KERN_WARNING,
+				     "%s: invalid EccVector: 0x%lx\n",
+				     __func__, value);
+			return -EINVAL;
+		}
 
+		pvt->injection.bit_map = (u32) value;
 		return count;
 	}
 	return ret;
@@ -147,7 +184,7 @@ struct mcidev_sysfs_attribute amd64_inj_attrs[] = {
 			.name = "inject_section",
 			.mode = (S_IRUGO | S_IWUSR)
 		},
-		.show = NULL,
+		.show = amd64_inject_section_show,
 		.store = amd64_inject_section_store,
 	},
 	{
@@ -155,7 +192,7 @@ struct mcidev_sysfs_attribute amd64_inj_attrs[] = {
 			.name = "inject_word",
 			.mode = (S_IRUGO | S_IWUSR)
 		},
-		.show = NULL,
+		.show = amd64_inject_word_show,
 		.store = amd64_inject_word_store,
 	},
 	{
@@ -163,7 +200,7 @@ struct mcidev_sysfs_attribute amd64_inj_attrs[] = {
 			.name = "inject_ecc_vector",
 			.mode = (S_IRUGO | S_IWUSR)
 		},
-		.show = NULL,
+		.show = amd64_inject_ecc_vector_show,
 		.store = amd64_inject_ecc_vector_store,
 	},
 	{
-- 
cgit v1.2.3


From 4997811e3b9e4d6f37380701894f063c62f14929 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Mon, 12 Oct 2009 17:23:03 +0200
Subject: amd64_edac: fix DRAM base and limit extraction masks, v2

This is a proper fix as a follow-up to 66216a7 and 916d11b.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 drivers/edac/amd64_edac.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/edac')

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 4f4ac82382f7..d4560d9d5a83 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1122,7 +1122,7 @@ static void k8_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 		debugf0("Reading K8_DRAM_BASE_LOW failed\n");
 
 	/* Extract parts into separate data entries */
-	pvt->dram_base[dram] = ((u64) low & 0xFFFF0000) << 24;
+	pvt->dram_base[dram] = ((u64) low & 0xFFFF0000) << 8;
 	pvt->dram_IntlvEn[dram] = (low >> 8) & 0x7;
 	pvt->dram_rw_en[dram] = (low & 0x3);
 
@@ -1135,7 +1135,7 @@ static void k8_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 	 * Extract parts into separate data entries. Limit is the HIGHEST memory
 	 * location of the region, so lower 24 bits need to be all ones
 	 */
-	pvt->dram_limit[dram] = (((u64) low & 0xFFFF0000) << 24) | 0x00FFFFFF;
+	pvt->dram_limit[dram] = (((u64) low & 0xFFFF0000) << 8) | 0x00FFFFFF;
 	pvt->dram_IntlvSel[dram] = (low >> 8) & 0x7;
 	pvt->dram_DstNode[dram] = (low & 0x7);
 }
@@ -1369,7 +1369,7 @@ static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 	pvt->dram_IntlvEn[dram] = (low_base >> 8) & 0x7;
 
 	pvt->dram_base[dram] = (((u64)high_base & 0x000000FF) << 40) |
-			       (((u64)low_base  & 0xFFFF0000) << 24);
+			       (((u64)low_base  & 0xFFFF0000) << 8);
 
 	low_offset = K8_DRAM_LIMIT_LOW + (dram << 3);
 	high_offset = F10_DRAM_LIMIT_HIGH + (dram << 3);
@@ -1391,7 +1391,7 @@ static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 	 * memory location of the region, so low 24 bits need to be all ones.
 	 */
 	pvt->dram_limit[dram] = (((u64)high_limit & 0x000000FF) << 40) |
-				(((u64) low_limit & 0xFFFF0000) << 24) |
+				(((u64) low_limit & 0xFFFF0000) << 8) |
 				0x00FFFFFF;
 }
 
-- 
cgit v1.2.3


From 156edd4aaa819ec5867ced83c7b8dba9193789ea Mon Sep 17 00:00:00 2001
From: Jeff Roberson <jroberson@jroberson.net>
Date: Mon, 26 Oct 2009 16:50:09 -0700
Subject: edac: i5400 fix csrow mapping

The i5400 EDAC driver has several bugs with chip-select row computation
which most likely lead to bugs in detailed error reporting.  Attempts to
contact the authors have gone mostly unanswered so I am presenting my diff
here.  I do not subscribe to lkml and would appreciate being kept in the
cc.

The most egregious problem was miscalculating the addresses of MTR
registers after register 0 by assuming they are 32bit rather than 16.
This caused the driver to miss half of the memories.  Most motherboards
tend to have only 8 dimm slots and not 16, so this may not have been
noticed before.

Further, the row calculations multiplied the number of dimms several
times, ultimately ending up with a maximum row of 32.  The chipset only
supports 4 dimms in each of 4 channels, so csrow could not be higher than
4 unless you use a row per-rank with dual-rank dimms.  I opted to
eliminate this behavior as it is confusing to the user and the error
reporting works by slot and not rank.  This gives a much clearer view of
memory by slot and channel in /sys.

Signed-off-by: Jeff Roberson <jroberson@jroberson.net>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/i5400_edac.c | 89 +++++++++++++++--------------------------------
 1 file changed, 28 insertions(+), 61 deletions(-)

(limited to 'drivers/edac')

diff --git a/drivers/edac/i5400_edac.c b/drivers/edac/i5400_edac.c
index b08b6d8e2dc7..f99d10655ed4 100644
--- a/drivers/edac/i5400_edac.c
+++ b/drivers/edac/i5400_edac.c
@@ -46,9 +46,10 @@
 /* Limits for i5400 */
 #define NUM_MTRS_PER_BRANCH	4
 #define CHANNELS_PER_BRANCH	2
+#define MAX_DIMMS_PER_CHANNEL	NUM_MTRS_PER_BRANCH
 #define	MAX_CHANNELS		4
-#define MAX_DIMMS		(MAX_CHANNELS * 4)	/* Up to 4 DIMM's per channel */
-#define MAX_CSROWS		(MAX_DIMMS * 2)		/* max possible csrows per channel */
+/* max possible csrows per channel */
+#define MAX_CSROWS		(MAX_DIMMS_PER_CHANNEL)
 
 /* Device 16,
  * Function 0: System Address
@@ -331,7 +332,6 @@ static const struct i5400_dev_info i5400_devs[] = {
 
 struct i5400_dimm_info {
 	int megabytes;		/* size, 0 means not present  */
-	int dual_rank;
 };
 
 /* driver private data structure */
@@ -849,11 +849,9 @@ static int determine_mtr(struct i5400_pvt *pvt, int csrow, int channel)
 	int n;
 
 	/* There is one MTR for each slot pair of FB-DIMMs,
-	   Each slot may have one or two ranks (2 csrows),
 	   Each slot pair may be at branch 0 or branch 1.
-	   So, csrow should be divided by eight
 	 */
-	n = csrow >> 3;
+	n = csrow;
 
 	if (n >= NUM_MTRS_PER_BRANCH) {
 		debugf0("ERROR: trying to access an invalid csrow: %d\n",
@@ -905,25 +903,22 @@ static void handle_channel(struct i5400_pvt *pvt, int csrow, int channel,
 		amb_present_reg = determine_amb_present_reg(pvt, channel);
 
 		/* Determine if there is a DIMM present in this DIMM slot */
-		if (amb_present_reg & (1 << (csrow >> 1))) {
-			dinfo->dual_rank = MTR_DIMM_RANK(mtr);
-
-			if (!((dinfo->dual_rank == 0) &&
-				((csrow & 0x1) == 0x1))) {
-				/* Start with the number of bits for a Bank
-				 * on the DRAM */
-				addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr);
-				/* Add thenumber of ROW bits */
-				addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
-				/* add the number of COLUMN bits */
-				addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
-
-				addrBits += 6;	/* add 64 bits per DIMM */
-				addrBits -= 20;	/* divide by 2^^20 */
-				addrBits -= 3;	/* 8 bits per bytes */
-
-				dinfo->megabytes = 1 << addrBits;
-			}
+		if (amb_present_reg & (1 << csrow)) {
+			/* Start with the number of bits for a Bank
+			 * on the DRAM */
+			addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr);
+			/* Add thenumber of ROW bits */
+			addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
+			/* add the number of COLUMN bits */
+			addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
+			/* add the number of RANK bits */
+			addrBits += MTR_DIMM_RANK(mtr);
+
+			addrBits += 6;	/* add 64 bits per DIMM */
+			addrBits -= 20;	/* divide by 2^^20 */
+			addrBits -= 3;	/* 8 bits per bytes */
+
+			dinfo->megabytes = 1 << addrBits;
 		}
 	}
 }
@@ -951,12 +946,12 @@ static void calculate_dimm_size(struct i5400_pvt *pvt)
 		return;
 	}
 
-	/* Scan all the actual CSROWS (which is # of DIMMS * 2)
+	/* Scan all the actual CSROWS
 	 * and calculate the information for each DIMM
 	 * Start with the highest csrow first, to display it first
 	 * and work toward the 0th csrow
 	 */
-	max_csrows = pvt->maxdimmperch * 2;
+	max_csrows = pvt->maxdimmperch;
 	for (csrow = max_csrows - 1; csrow >= 0; csrow--) {
 
 		/* on an odd csrow, first output a 'boundary' marker,
@@ -1064,7 +1059,7 @@ static void i5400_get_mc_regs(struct mem_ctl_info *mci)
 
 	/* Get the set of MTR[0-3] regs by each branch */
 	for (slot_row = 0; slot_row < NUM_MTRS_PER_BRANCH; slot_row++) {
-		int where = MTR0 + (slot_row * sizeof(u32));
+		int where = MTR0 + (slot_row * sizeof(u16));
 
 		/* Branch 0 set of MTR registers */
 		pci_read_config_word(pvt->branch_0, where,
@@ -1146,7 +1141,7 @@ static int i5400_init_csrows(struct mem_ctl_info *mci)
 	pvt = mci->pvt_info;
 
 	channel_count = pvt->maxch;
-	max_csrows = pvt->maxdimmperch * 2;
+	max_csrows = pvt->maxdimmperch;
 
 	empty = 1;		/* Assume NO memory */
 
@@ -1214,28 +1209,6 @@ static void i5400_enable_error_reporting(struct mem_ctl_info *mci)
 			fbd_error_mask);
 }
 
-/*
- * i5400_get_dimm_and_channel_counts(pdev, &num_csrows, &num_channels)
- *
- *	ask the device how many channels are present and how many CSROWS
- *	 as well
- */
-static void i5400_get_dimm_and_channel_counts(struct pci_dev *pdev,
-					int *num_dimms_per_channel,
-					int *num_channels)
-{
-	u8 value;
-
-	/* Need to retrieve just how many channels and dimms per channel are
-	 * supported on this memory controller
-	 */
-	pci_read_config_byte(pdev, MAXDIMMPERCH, &value);
-	*num_dimms_per_channel = (int)value * 2;
-
-	pci_read_config_byte(pdev, MAXCH, &value);
-	*num_channels = (int)value;
-}
-
 /*
  *	i5400_probe1	Probe for ONE instance of device to see if it is
  *			present.
@@ -1263,22 +1236,16 @@ static int i5400_probe1(struct pci_dev *pdev, int dev_idx)
 	if (PCI_FUNC(pdev->devfn) != 0)
 		return -ENODEV;
 
-	/* Ask the devices for the number of CSROWS and CHANNELS so
-	 * that we can calculate the memory resources, etc
-	 *
-	 * The Chipset will report what it can handle which will be greater
-	 * or equal to what the motherboard manufacturer will implement.
-	 *
-	 * As we don't have a motherboard identification routine to determine
+	/* As we don't have a motherboard identification routine to determine
 	 * actual number of slots/dimms per channel, we thus utilize the
 	 * resource as specified by the chipset. Thus, we might have
 	 * have more DIMMs per channel than actually on the mobo, but this
 	 * allows the driver to support upto the chipset max, without
 	 * some fancy mobo determination.
 	 */
-	i5400_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel,
-					&num_channels);
-	num_csrows = num_dimms_per_channel * 2;
+	num_dimms_per_channel = MAX_DIMMS_PER_CHANNEL;
+	num_channels = MAX_CHANNELS;
+	num_csrows = num_dimms_per_channel;
 
 	debugf0("MC: %s(): Number of - Channels= %d  DIMMS= %d  CSROWS= %d\n",
 		__func__, num_channels, num_dimms_per_channel, num_csrows);
-- 
cgit v1.2.3


From 0616fb003d4f799c4be62275242fc7ff9a968f84 Mon Sep 17 00:00:00 2001
From: "Ira W. Snyder" <iws@ovro.caltech.edu>
Date: Mon, 26 Oct 2009 16:50:10 -0700
Subject: edac: i5400 fix missing CONFIG_PCI define

When building without CONFIG_PCI the edac_pci_idx variable is unused,
causing a build-time warning.  Wrap the variable in #ifdef CONFIG_PCI,
just like the rest of the PCI support.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/mpc85xx_edac.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/edac')

diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 157f6504f25e..cf27402af97b 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -26,7 +26,9 @@
 #include "mpc85xx_edac.h"
 
 static int edac_dev_idx;
+#ifdef CONFIG_PCI
 static int edac_pci_idx;
+#endif
 static int edac_mc_idx;
 
 static u32 orig_ddr_err_disable;
-- 
cgit v1.2.3


From c2494ace990c5d37cfe66911b85d28e6945eadfc Mon Sep 17 00:00:00 2001
From: Keith Mannthey <kmannth@us.ibm.com>
Date: Mon, 26 Oct 2009 16:50:11 -0700
Subject: edac: i5100 fix initialization code

Allow csrows to properly initialize when the topology only has active
channels on 2 and 3.  This new check allows proper detection and
initialization in this topology.  Only checking the first mrt that
represented channels 0 and 1 is not sufficient.

I also fixed up the related debug information path.  I can submit as a 2nd
patch if needed.

Signed-off-by: Keith Mannthey <kmannth@us.ibm.com>
Acked-by: Aristeu Rozanski <aris@ruivo.org>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/i5000_edac.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/edac')

diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index d335086f4a26..77a9579d7167 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c
@@ -1173,7 +1173,7 @@ static void i5000_get_mc_regs(struct mem_ctl_info *mci)
 			pci_read_config_word(pvt->branch_1, where,
 					&pvt->b1_mtr[slot_row]);
 			debugf2("MTR%d where=0x%x B1 value=0x%x\n", slot_row,
-				where, pvt->b0_mtr[slot_row]);
+				where, pvt->b1_mtr[slot_row]);
 		} else {
 			pvt->b1_mtr[slot_row] = 0;
 		}
@@ -1232,7 +1232,7 @@ static int i5000_init_csrows(struct mem_ctl_info *mci)
 	struct csrow_info *p_csrow;
 	int empty, channel_count;
 	int max_csrows;
-	int mtr;
+	int mtr, mtr1;
 	int csrow_megs;
 	int channel;
 	int csrow;
@@ -1251,9 +1251,10 @@ static int i5000_init_csrows(struct mem_ctl_info *mci)
 
 		/* use branch 0 for the basis */
 		mtr = pvt->b0_mtr[csrow >> 1];
+		mtr1 = pvt->b1_mtr[csrow >> 1];
 
 		/* if no DIMMS on this row, continue */
-		if (!MTR_DIMMS_PRESENT(mtr))
+		if (!MTR_DIMMS_PRESENT(mtr) && !MTR_DIMMS_PRESENT(mtr1))
 			continue;
 
 		/* FAKE OUT VALUES, FIXME */
-- 
cgit v1.2.3