| Age | Commit message (Collapse) | Author |
|---|
|
This validates the previous commit: RM_ADDR were sent over the first
found active subflow which could be the same as the one being removed.
It is more likely to loose this notification.
For this check, RM_ADDR are explicitly dropped when trying to send them
over the initial subflow, when removing the endpoint attached to it. If
it is dropped, the test will complain because some RM_ADDR have not been
received.
Note that only the RM_ADDR are dropped, to allow the linked subflow to
be quickly and cleanly closed. To only drop those RM_ADDR, a cBPF byte
code is used. If the IPTables commands fail, that's OK, the tests will
continue to pass, but not validate this part. This can be ignored:
another subtest fully depends on such command, and will be marked as
skipped.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 8dd5efb1f91b ("mptcp: send ack for rm_addr")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-3-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By default, the netem qdisc can keep up to 1000 packets under its belly
to deal with the configured rate and delay. The simult flows test-case
simulates very low speed links, to avoid problems due to slow CPUs and
the TCP stack tend to transmit at a slightly higher rate than the
(virtual) link constraints.
All the above causes a relatively large amount of packets being enqueued
in the netem qdiscs - the longer the transfer, the longer the queue -
producing increasingly high TCP RTT samples and consequently increasingly
larger receive buffer size due to DRS.
When the receive buffer size becomes considerably larger than the needed
size, the tests results can flake, i.e. because minimal inaccuracy in the
pacing rate can lead to a single subflow usage towards the end of the
connection for a considerable amount of data.
Address the issue explicitly setting netem limits suitable for the
configured link speeds and unflake all the affected tests.
Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-1-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
list_categories() builds a set directly from the 'category'
field of each test case. Since 'category' is a list,
set(map(...)) attempts to insert lists into a set, which
raises:
TypeError: unhashable type: 'list'
Flatten category lists and collect unique category names
using set.update() instead.
Signed-off-by: Naveen Anandhan <mr.navi8680@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a selftest to verify that changing xmit_hash_policy to vlan+srcmac
is rejected when a native XDP program is loaded on a bond in 802.3ad
mode. Without the fix in bond_option_xmit_hash_policy_set(), the change
succeeds silently, creating an inconsistent state that triggers a kernel
WARNING in dev_xdp_uninstall() when the bond is torn down.
The test attaches native XDP to a bond0 (802.3ad, layer2+3), then
attempts to switch xmit_hash_policy to vlan+srcmac and asserts the
operation fails. It also verifies the change succeeds after XDP is
detached, confirming the rejection is specific to the XDP-loaded state.
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260226080306.98766-3-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 1cc93c48b5d7 ("selftests/net: packetdrill: remove tests for
tcp_rcv_*big") removed the test for the reverted commit 1d2fbaad7cd8
("tcp: stronger sk_rcvbuf checks") but also the one for commit
9ca48d616ed7 ("tcp: do not accept packets beyond window").
Restore the test with the necessary adaptation: expect a delayed ACK
instead of an immediate one, since tcp_can_ingest() does not fail
anymore for the last data packet.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Link: https://patch.msgid.link/20260301-tcp_rcv_big_endseq-v1-1-86ab7415ab58@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 1d2fbaad7cd8 ("tcp: stronger sk_rcvbuf checks")
has been reverted we need to remove the corresponding tests.
Link: https://lore.kernel.org/20260227003359.2391017-1-kuba@kernel.org
Link: https://patch.msgid.link/20260227033446.2596457-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add 4 test cases to exercise new act_ct binding restrictions:
- Try to attach act_ct to an ets qdisc
- Attach act_ct to an ingress qdisc
- Attach act_ct to a clsact/egress qdisc
- Attach act_ct to a shared block
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260225134349.1287037-2-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub reports test flakes on debug kernels:
FAIL: test_udp_gro_ct: Expected software segmentation to occur, had 23 and 17
This test assumes that the kernels nfnetlink_queue module sees N GSO
packets, segments them into M skbs and queues them to userspace for
reinjection.
Hence, if M >= N, no segmentation occurred.
However, its possible that this happens:
- nfnetlink_queue gets GSO packet
- segments that into n skbs
- userspace buffer is full, kernel drops the segmented skbs
-> "toqueue" counter incremented by 1, "fromqueue" is unchanged.
If this happens often enough in a single run, M >= N check triggers
incorrectly.
To solve this, allow the nf_queue.c test program to set the FAIL_OPEN
flag so that the segmented skbs bypass the queueing step in the kernel
if the receive buffer is full.
Also, reduce number of sending socat instances, decrease their priority
and increase nice value for the nf_queue program itself to reduce the
probability of overruns happening in the first place.
Fixes: 59ecffa3995e ("selftests: netfilter: nft_queue.sh: add udp fraglist gro test case")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20260218184114.0b405b72@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260226161920.1205-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new test file bridge_vlan_dump.sh with four test cases that verify
VLANs with different per-VLAN options are not incorrectly grouped into
ranges in the dump output.
The tests verify the kernel's br_vlan_opts_eq_range() function correctly
prevents VLAN range grouping when neigh_suppress, mcast_max_groups,
mcast_n_groups, or mcast_enabled options differ.
Each test verifies that VLANs with different option values appear as
individual entries rather than ranges, and that VLANs with matching
values are properly grouped together.
Example output:
$ ./bridge_vlan_dump.sh
TEST: VLAN range grouping with neigh_suppress [ OK ]
TEST: VLAN range grouping with mcast_max_groups [ OK ]
TEST: VLAN range grouping with mcast_n_groups [ OK ]
TEST: VLAN range grouping with mcast_enabled [ OK ]
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260225143956.3995415-3-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth:
- bnxt_en: fix deleting of Ntuple filters
- wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth:
- mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- gve: fix incorrect buffer cleanup for QPL
- team: avoid NETDEV_CHANGEMTU event when unregistering slave
- usb: validate USB endpoints"
* tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
net: consume xmit errors of GSO frames
vsock: document write-once behavior of the child_ns_mode sysctl
vsock: lock down child_ns_mode as write-once
selftests/vsock: change tests to respect write-once child ns mode
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
net/mlx5: Fix missing devlink lock in SRIOV enable error path
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
net/mlx5: LAG, disable MPESW in lag_disable_change()
net/mlx5: DR, Fix circular locking dependency in dump
selftests: team: Add a reference count leak test
team: avoid NETDEV_CHANGEMTU event when unregistering slave
net: mana: Fix double destroy_workqueue on service rescan PCI path
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
tcp: re-enable acceptance of FIN packets when RWIN is 0
vsock: Use container_of() to get net namespace in sysctl handlers
net: usb: kaweth: validate USB endpoints
...
|
|
The child_ns_mode sysctl parameter becomes write-once in a future patch
in this series, which breaks existing tests. This patch updates the
tests to respect this new policy. No additional tests are added.
Add "global-parent" and "local-parent" namespaces as intermediaries to
spawn namespaces in the given modes. This avoids the need to change
"child_ns_mode" in the init_ns. nsenter must be used because ip netns
unshares the mount namespace so nested "ip netns add" breaks exec calls
from the init ns. Adds nsenter to the deps check.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260223-vsock-ns-write-once-v3-1-c0cde6959923@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test for the issue that was fixed in "team: avoid NETDEV_CHANGEMTU
event when unregistering slave".
The test hangs due to a reference count leak without the fix:
# make -C tools/testing/selftests TARGETS="drivers/net/team" TEST_PROGS=refleak.sh TEST_GEN_PROGS="" run_tests
[...]
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net/team: refleak.sh
[ 50.681299][ T496] unregister_netdevice: waiting for dummy1 to become free. Usage count = 3
[ 71.185325][ T496] unregister_netdevice: waiting for dummy1 to become free. Usage count = 3
And passes with the fix:
# make -C tools/testing/selftests TARGETS="drivers/net/team" TEST_PROGS=refleak.sh TEST_GEN_PROGS="" run_tests
[...]
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net/team: refleak.sh
ok 1 selftests: drivers/net/team: refleak.sh
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260224125709.317574-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a packetdrill test that verifies we accept bare FIN packets when
the advertised receive window is zero.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260224-fix_zero_wnd_fin-v2-2-a16677ea7cea@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Various bug fixes for the example schedulers and selftests
* tag 'sched_ext-for-7.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
tools/sched_ext: fix getopt not re-parsed on restart
tools/sched_ext: scx_userland: fix data races on shared counters
tools/sched_ext: scx_pair: fix stride == 0 crash on single-CPU systems
tools/sched_ext: scx_central: fix CPU_SET and skeleton leak on early exit
tools/sched_ext: scx_userland: fix stale data on restart
tools/sched_ext: scx_flatcg: fix potential stack overflow from VLA in fcg_read_stats
selftests/sched_ext: Fix rt_stall flaky failure
tools/sched_ext: scx_userland: fix restart and stats thread lifecycle bugs
tools/sched_ext: scx_central: fix sched_setaffinity() call with the set size
tools/sched_ext: scx_flatcg: zero-initialize stats counter array
|
|
Add a test to verify that RSS contexts persist across interface
down/up along with their associated Ntuple filters. Another test
that creates contexts/rules keeping interface down and test their
persistence is also added.
Tested on bnxt_en:
TAP version 13
1..1
# timeout set to 0
# selftests: drivers/net/hw: rss_ctx.py
# TAP version 13
# 1..2
# ok 1 rss_ctx.test_rss_context_persist_create_and_ifdown
# ok 2 rss_ctx.test_rss_context_persist_ifdown_and_create # SKIP Create context not supported with interface down
# # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:1 error:0
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260219185313.2682148-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200"
* tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: nfc: nci: Fix parameter validation for packet data
net/mlx5e: Use unsigned for mlx5e_get_max_num_channels
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
net/mlx5: Fix misidentification of write combining CQE during poll loop
net/mlx5e: Fix misidentification of ASO CQE during poll loop
net/mlx5: Fix multiport device check over light SFs
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
bnge: fix reserving resources from FW
eth: fbnic: Advertise supported XDP features.
rds: tcp: fix uninit-value in __inet_bind
net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
octeontx2-af: Fix default entries mcam entry action
net/mlx5e: XSK, Fix unintended ICOSQ change
ipv6: icmp: icmpv6_xrlim_allow() optimization if net.ipv6.icmp.ratelimit is zero
ipv4: icmp: icmpv4_xrlim_allow() optimization if net.ipv4.icmp_ratelimit is zero
ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp: prevent possible overflow in icmp_global_allow()
selftests/net: packetdrill: add ipv4-mapped-ipv6 tests
...
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix invalid write loop logic in libbpf's bpf_linker__add_buf() (Amery
Hung)
- Fix a potential use-after-free of BTF object (Anton Protopopov)
- Add feature detection to libbpf and avoid moving arena global
variables on older kernels (Emil Tsalapatis)
- Remove extern declaration of bpf_stream_vprintk() from libbpf headers
(Ihor Solodrai)
- Fix truncated netlink dumps in bpftool (Jakub Kicinski)
- Fix map_kptr grace period wait in bpf selftests (Kumar Kartikeya
Dwivedi)
- Remove hexdump dependency while building bpf selftests (Matthieu
Baerts)
- Complete fsession support in BPF trampolines on riscv (Menglong Dong)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Remove hexdump dependency
libbpf: Remove extern declaration of bpf_stream_vprintk()
selftests/bpf: Use vmlinux.h in test_xdp_meta
bpftool: Fix truncated netlink dumps
libbpf: Delay feature gate check until object prepare time
libbpf: Do not use PROG_TYPE_TRACEPOINT program for feature gating
bpf: Add a map/btf from a fd array more consistently
selftests/bpf: Fix map_kptr grace period wait
selftests/bpf: enable fsession_test on riscv64
selftests/bpf: Adjust selftest due to function rename
bpf, riscv: add fsession support for trampolines
bpf: Fix a potential use-after-free of BTF object
bpf, riscv: introduce emit_store_stack_imm64() for trampoline
libbpf: Fix invalid write loop logic in bpf_linker__add_buf()
libbpf: Add gating for arena globals relocation feature
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-MM updates from Andrew Morton:
- "two fixes in kho_populate()" fixes a couple of not-major issues in
the kexec handover code (Ran Xiaokai)
- misc singletons
* tag 'mm-nonmm-stable-2026-02-18-19-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib/group_cpus: handle const qualifier from clusters allocation type
kho: remove unnecessary WARN_ON(err) in kho_populate()
kho: fix missing early_memunmap() call in kho_populate()
scripts/gdb: implement x86_page_ops in mm.py
objpool: fix the overestimation of object pooling metadata size
selftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONT
delayacct: fix build regression on accounting tool
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a
couple of issues in the demotion code - pages were failed demotion
and were finding themselves demoted into disallowed nodes (Bing Jiao)
- "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare
mapledtree race and performs a number of cleanups (Liam Howlett)
- "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use
them" implements a lot of cleanups following on from the conversion
of the VMA flags into a bitmap (Lorenzo Stoakes)
- "support batch checking of references and unmapping for large folios"
implements batching to greatly improve the performance of reclaiming
clean file-backed large folios (Baolin Wang)
- "selftests/mm: add memory failure selftests" does as claimed (Miaohe
Lin)
* tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits)
mm/page_alloc: clear page->private in free_pages_prepare()
selftests/mm: add memory failure dirty pagecache test
selftests/mm: add memory failure clean pagecache test
selftests/mm: add memory failure anonymous page test
mm: rmap: support batched unmapping for file large folios
arm64: mm: implement the architecture-specific clear_flush_young_ptes()
arm64: mm: support batch clearing of the young flag for large folios
arm64: mm: factor out the address and ptep alignment into a new helper
mm: rmap: support batched checks of the references for large folios
tools/testing/vma: add VMA userland tests for VMA flag functions
tools/testing/vma: separate out vma_internal.h into logical headers
tools/testing/vma: separate VMA userland tests into separate files
mm: make vm_area_desc utilise vma_flags_t only
mm: update all remaining mmap_prepare users to use vma_flags_t
mm: update shmem_[kernel]_file_*() functions to use vma_flags_t
mm: update secretmem to use VMA flags on mmap_prepare
mm: update hugetlbfs to use VMA flags on mmap_prepare
mm: add basic VMA flag operation helper functions
tools: bitmap: add missing bitmap_[subset(), andnot()]
mm: add mk_vma_flags() bitmap flag macro helper
...
|
|
Add ipv4-mapped-ipv6 case to ksft_runner.sh before
an upcoming TCP fix in this area.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260217142924.1853498-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The verification signature header generation requires converting a
binary certificate to a C array. Previously this only worked with xxd,
and a switch to hexdump has been done in commit b640d556a2b3
("selftests/bpf: Remove xxd util dependency").
hexdump is a more common utility program, yet it might not be installed
by default. When it is not installed, BPF selftests build without
errors, but tests_progs is unusable: it exits with the 255 code and
without any error messages. When manually reproducing the issue, it is
not too hard to find out that the generated verification_cert.h file is
incorrect, but that's time consuming. When digging the BPF selftests
build logs, this line can be seen amongst thousands others, but ignored:
/bin/sh: 2: hexdump: not found
Here, od is used instead of hexdump. od is coming from the coreutils
package, and this new od command produces the same output when using od
from GNU coreutils, uutils, and even busybox. This is more portable, and
it produces a similar results to what was done before with hexdump:
there is an extra comma at the end instead of trailing whitespaces,
but the C code is not impacted.
Fixes: b640d556a2b3 ("selftests/bpf: Remove xxd util dependency")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20260218-bpf-sft-hexdump-od-v2-1-2f9b3ee5ab86@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
- Replace linux/* includes with vmlinux.h
- Include errno.h
- Include bpf_tracing_net.h for TC_ACT_* and ETH_*
- Use BPF_STDERR instead of BPF_STREAM_STDERR
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260218215651.2057673-2-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Since we started running selftests in NIPA we have been seeing
tc_actions.sh generate a soft lockup warning on ~20% of the runs.
On the pre-netdev foundation setup it was actually a missed irq
splat from the console. Now it's either that or a lockup.
I initially suspected a socket locking issue since the test
is exercising local loopback with act_mirred.
After hours of staring at this I noticed in strace that ncat
when -o $file is specified _both_ saves the output to the file
and still prints it to stdout. Because the file being sent
is constructed with:
dd conv=sparse status=none if=/dev/zero bs=1M count=2 of=$mirred
^^^^^^^^^
the data printed is all \0. Most terminals don't display nul
characters (and neither does vng output capture save them).
But QEMU's serial console still has to poke them thru which
is very slow and causes the lockup (if the file is >600kB).
Replace the '-o $file' with '> $file'. This speeds the test up
from 2m20s to 18s on debug kernels, and prevents the warnings.
Fixes: ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260214035159.2119699-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tests use the tc pedit action to modify the IPv4 source address
("pedit ex munge ip src set"), but the IP header checksum is not
recalculated after the modification. As a result, the modified packet
fails sanity checks in br_netfilter after bridging and is dropped,
which causes the test to fail.
Fix this by ensuring net.bridge.bridge-nf-call-iptables is set to 0
during the test execution. This prevents the bridge from passing
L2 traffic to netfilter, bypassing the checksum validation that
causes the test failure.
Fixes: 92ad3828944e ("selftests: forwarding: Add a test for pedit munge SIP and DIP")
Fixes: 226657ba2389 ("selftests: forwarding: Add a forwarding test for pedit munge dsfield")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-4-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
br_netfilter enabled
The test generates VXLAN traffic using mausezahn, where the encapsulated
inner IPv6 packet has an incorrect payload length set in the IPv6 header.
After VXLAN decapsulation, such packets do not pass sanity checks in
br_netfilter and are dropped, which causes the test to fail.
Fix this by setting the correct IPv6 payload length for the encapsulated
packet generated by mausezahn, so that the packet is accepted
by br_netfilter.
tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh
lines 698-706
)"00:03:"$( : Payload length
)"3a:"$( : Next header
)"04:"$( : Hop limit
)"$saddr:"$( : IP saddr
)"$daddr:"$( : IP daddr
)"80:"$( : ICMPv6.type
)"00:"$( : ICMPv6.code
)"00:"$( : ICMPv6.checksum
)
Data after IPv6 header:
• 80: — 1 byte (ICMPv6 type)
• 00: — 1 byte (ICMPv6 code)
• 00: — 1 byte (ICMPv6 checksum, truncated)
Total: 3 bytes → 00:03 is correct. The old value 00:08 did not match
the actual payload size.
Fixes: b07e9957f220 ("selftests: forwarding: Add VxLAN tests with a VLAN-unaware bridge for IPv6")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-3-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
enabled
The test generates VXLAN traffic using mausezahn, where the encapsulated
inner IPv4 packet contains a zero IP header checksum. After VXLAN
decapsulation, such packets do not pass sanity checks in br_netfilter
and are dropped, which causes the test to fail.
Fix this by calculating and setting a valid IPv4 header checksum for the
encapsulated packet generated by mausezahn, so that the packet is accepted
by br_netfilter. Fixed by using the payload_template_calc_checksum() /
payload_template_expand_checksum() helpers that are only available
in v6.3 and newer kernels.
Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-2-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Recently we were able to trigger a warning in the mdb_n_entries counting
code. Add tests that exercise different ways which used to trigger that
warning.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://patch.msgid.link/20260213070031.1400003-3-nikolay@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add check_rx_hds test that verifies header/data split works across
payload sizes. The test sweeps payload sizes from 1 byte to 8KB, if any
data propagates up to userspace as SCM_DEVMEM_LINEAR, then the test
fails. This shows that regardless of payload size, ncdevmem's
configuration of hds-thresh to 0 is respected.
Add -L (--fail-on-linear) flag to ncdevmem that causes the receiver to
fail if any SCM_DEVMEM_LINEAR cmsg is received.
Use socat option for fixed block sizing and tcp nodelay to disable
nagle's algo to avoid buffering.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260211-fbnic-tcp-hds-fixes-v1-4-55d050e6f606@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Select HAVE_CMPXCHG_{LOCAL,DOUBLE}
- Add 128-bit atomic cmpxchg support
- Add HOTPLUG_SMT implementation
- Wire up memfd_secret system call
- Fix boot errors and unwind errors for KASAN
- Use BPF prog pack allocator and add BPF arena support
- Update dts files to add nand controllers
- Some bug fixes and other small changes
* tag 'loongarch-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: dts: loongson-2k1000: Add nand controller support
LoongArch: dts: loongson-2k0500: Add nand controller support
LoongArch: BPF: Implement bpf_addr_space_cast instruction
LoongArch: BPF: Implement PROBE_MEM32 pseudo instructions
LoongArch: BPF: Use BPF prog pack allocator
LoongArch: Use IS_ERR_PCPU() macro for KGDB
LoongArch: Rework KASAN initialization for PTW-enabled systems
LoongArch: Disable instrumentation for setup_ptwalker()
LoongArch: Remove some extern variables in source files
LoongArch: Guard percpu handler under !CONFIG_PREEMPT_RT
LoongArch: Handle percpu handler address for ORC unwinder
LoongArch: Use %px to print unmodified unwinding address
LoongArch: Prefer top-down allocation after arch_mem_init()
LoongArch: Add HOTPLUG_SMT implementation
LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE
LoongArch: Wire up memfd_secret system call
LoongArch: Replace seq_printf() with seq_puts() for simple strings
LoongArch: Add 128-bit atomic cmpxchg support
LoongArch: Add detection for SC.Q support
LoongArch: Select HAVE_CMPXCHG_LOCAL in Kconfig
|
|
Now that the RISC-V trampoline JIT supports BPF_TRACE_FSESSION, run
the fsession selftest on riscv64 as well as x86_64.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Tested-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20260208053311.698352-4-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit c27cea4416a3 ("rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast")
broke map_kptr selftest since it removed the function we were kprobing.
Use a new kfunc that invokes call_rcu_tasks_trace and sets a program
provided pointer to an integer to 1. Technically this can be unsafe if
the memory being written to from the callback disappears, but this is
just for usage in a test where we ensure we spin until we see the value
to be set to 1, so it's ok.
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Fixes: c27cea4416a3 ("rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260211185747.3630539-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
do_filp_open() was renamed in commit
541003b576c3 ("rename do_filp_open() to do_file_open()")
This broke test_profiler, because it uses a kretprobe on that
function. Fix it by renaming accordingly.
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Closes: https://lore.kernel.org/bpf/djwjf2vfb7gro3rfag666bojod6ytcectahnb5z6hx2hawimtj@sx47ghzjg4lw/
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260210235855.215679-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
wait_for_port() can wait up to 2 seconds with the sleep and the polling
in wait_local_port_listen() combined. So, in netcons_basic.sh, the socat
process could die before the test writes to the netconsole.
Increase the timeout to 3 seconds to make netcons_basic.sh pass
consistently.
Fixes: 3dc6c76391cb ("selftests: net: Add IPv6 support to netconsole basic tests")
Signed-off-by: Pin-yen Lin <treapking@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260210005939.3230550-1-treapking@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull KVM updates from Paolo Bonzini:
"Loongarch:
- Add more CPUCFG mask bits
- Improve feature detection
- Add lazy load support for FPU and binary translation (LBT) register
state
- Fix return value for memory reads from and writes to in-kernel
devices
- Add support for detecting preemption from within a guest
- Add KVM steal time test case to tools/selftests
ARM:
- Add support for FEAT_IDST, allowing ID registers that are not
implemented to be reported as a normal trap rather than as an UNDEF
exception
- Add sanitisation of the VTCR_EL2 register, fixing a number of
UXN/PXN/XN bugs in the process
- Full handling of RESx bits, instead of only RES0, and resulting in
SCTLR_EL2 being added to the list of sanitised registers
- More pKVM fixes for features that are not supposed to be exposed to
guests
- Make sure that MTE being disabled on the pKVM host doesn't give it
the ability to attack the hypervisor
- Allow pKVM's host stage-2 mappings to use the Force Write Back
version of the memory attributes by using the "pass-through'
encoding
- Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
guest
- Preliminary work for guest GICv5 support
- A bunch of debugfs fixes, removing pointless custom iterators
stored in guest data structures
- A small set of FPSIMD cleanups
- Selftest fixes addressing the incorrect alignment of page
allocation
- Other assorted low-impact fixes and spelling fixes
RISC-V:
- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and
kvm_riscv_vcpu_aia_imsic_update()
- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM
- Transparent huge page support for hypervisor page tables
- Adjust the number of available guest irq files based on MMIO
register sizes found in the device tree or the ACPI tables
- Add RISC-V specific paging modes to KVM selftests
- Detect paging mode at runtime for selftests
s390:
- Performance improvement for vSIE (aka nested virtualization)
- Completely new memory management. s390 was a special snowflake that
enlisted help from the architecture's page table management to
build hypervisor page tables, in particular enabling sharing the
last level of page tables. This however was a lot of code (~3K
lines) in order to support KVM, and also blocked several features.
The biggest advantages is that the page size of userspace is
completely independent of the page size used by the guest:
userspace can mix normal pages, THPs and hugetlbfs as it sees fit,
and in fact transparent hugepages were not possible before. It's
also now possible to have nested guests and guests with huge pages
running on the same host
- Maintainership change for s390 vfio-pci
- Small quality of life improvement for protected guests
x86:
- Add support for giving the guest full ownership of PMU hardware
(contexted switched around the fastpath run loop) and allowing
direct access to data MSRs and PMCs (restricted by the vPMU model).
KVM still intercepts access to control registers, e.g. to enforce
event filtering and to prevent the guest from profiling sensitive
host state. This is more accurate, since it has no risk of
contention and thus dropped events, and also has significantly less
overhead.
For more information, see the commit message for merge commit
bf2c3138ae36 ("Merge tag 'kvm-x86-pmu-6.20' ...")
- Disallow changing the virtual CPU model if L2 is active, for all
the same reasons KVM disallows change the model after the first
KVM_RUN
- Fix a bug where KVM would incorrectly reject host accesses to PV
MSRs when running with KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled,
even if those were advertised as supported to userspace,
- Fix a bug with protected guest state (SEV-ES/SNP and TDX) VMs,
where KVM would attempt to read CR3 configuring an async #PF entry
- Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM
(for x86 only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL.
Only a few exports that are intended for external usage, and those
are allowed explicitly
- When checking nested events after a vCPU is unblocked, ignore
-EBUSY instead of WARNing. Userspace can sometimes put the vCPU
into what should be an impossible state, and spurious exit to
userspace on -EBUSY does not really do anything to solve the issue
- Also throw in the towel and drop the WARN on INIT/SIPI being
blocked when vCPU is in Wait-For-SIPI, which also resulted in
playing whack-a-mole with syzkaller stuffing architecturally
impossible states into KVM
- Add support for new Intel instructions that don't require anything
beyond enumerating feature flags to userspace
- Grab SRCU when reading PDPTRs in KVM_GET_SREGS2
- Add WARNs to guard against modifying KVM's CPU caps outside of the
intended setup flow, as nested VMX in particular is sensitive to
unexpected changes in KVM's golden configuration
- Add a quirk to allow userspace to opt-in to actually suppress EOI
broadcasts when the suppression feature is enabled by the guest
(currently limited to split IRQCHIP, i.e. userspace I/O APIC).
Sadly, simply fixing KVM to honor Suppress EOI Broadcasts isn't an
option as some userspaces have come to rely on KVM's buggy behavior
(KVM advertises Supress EOI Broadcast irrespective of whether or
not userspace I/O APIC supports Directed EOIs)
- Clean up KVM's handling of marking mapped vCPU pages dirty
- Drop a pile of *ancient* sanity checks hidden behind in KVM's
unused ASSERT() macro, most of which could be trivially triggered
by the guest and/or user, and all of which were useless
- Fold "struct dest_map" into its sole user, "struct rtc_status", to
make it more obvious what the weird parameter is used for, and to
allow fropping these RTC shenanigans if CONFIG_KVM_IOAPIC=n
- Bury all of ioapic.h, i8254.h and related ioctls (including
KVM_CREATE_IRQCHIP) behind CONFIG_KVM_IOAPIC=y
- Add a regression test for recent APICv update fixes
- Handle "hardware APIC ISR", a.k.a. SVI, updates in
kvm_apic_update_apicv() to consolidate the updates, and to
co-locate SVI updates with the updates for KVM's own cache of ISR
information
- Drop a dead function declaration
- Minor cleanups
x86 (Intel):
- Rework KVM's handling of VMCS updates while L2 is active to
temporarily switch to vmcs01 instead of deferring the update until
the next nested VM-Exit.
The deferred updates approach directly contributed to several bugs,
was proving to be a maintenance burden due to the difficulty in
auditing the correctness of deferred updates, and was polluting
"struct nested_vmx" with a growing pile of booleans
- Fix an SGX bug where KVM would incorrectly try to handle EPCM page
faults, and instead always reflect them into the guest. Since KVM
doesn't shadow EPCM entries, EPCM violations cannot be due to KVM
interference and can't be resolved by KVM
- Fix a bug where KVM would register its posted interrupt wakeup
handler even if loading kvm-intel.ko ultimately failed
- Disallow access to vmcb12 fields that aren't fully supported,
mostly to avoid weirdness and complexity for FRED and other
features, where KVM wants enable VMCS shadowing for fields that
conditionally exist
- Print out the "bad" offsets and values if kvm-intel.ko refuses to
load (or refuses to online a CPU) due to a VMCS config mismatch
x86 (AMD):
- Drop a user-triggerable WARN on nested_svm_load_cr3() failure
- Add support for virtualizing ERAPS. Note, correct virtualization of
ERAPS relies on an upcoming, publicly announced change in the APM
to reduce the set of conditions where hardware (i.e. KVM) *must*
flush the RAP
- Ignore nSVM intercepts for instructions that are not supported
according to L1's virtual CPU model
- Add support for expedited writes to the fast MMIO bus, a la VMX's
fastpath for EPT Misconfig
- Don't set GIF when clearing EFER.SVME, as GIF exists independently
of SVM, and allow userspace to restore nested state with GIF=0
- Treat exit_code as an unsigned 64-bit value through all of KVM
- Add support for fetching SNP certificates from userspace
- Fix a bug where KVM would use vmcb02 instead of vmcb01 when
emulating VMLOAD or VMSAVE on behalf of L2
- Misc fixes and cleanups
x86 selftests:
- Add a regression test for TPR<=>CR8 synchronization and IRQ masking
- Overhaul selftest's MMU infrastructure to genericize stage-2 MMU
support, and extend x86's infrastructure to support EPT and NPT
(for L2 guests)
- Extend several nested VMX tests to also cover nested SVM
- Add a selftest for nested VMLOAD/VMSAVE
- Rework the nested dirty log test, originally added as a regression
test for PML where KVM logged L2 GPAs instead of L1 GPAs, to
improve test coverage and to hopefully make the test easier to
understand and maintain
guest_memfd:
- Remove kvm_gmem_populate()'s preparation tracking and half-baked
hugepage handling. SEV/SNP was the only user of the tracking and it
can do it via the RMP
- Retroactively document and enforce (for SNP) that
KVM_SEV_SNP_LAUNCH_UPDATE and KVM_TDX_INIT_MEM_REGION require the
source page to be 4KiB aligned, to avoid non-trivial complexity for
something that no known VMM seems to be doing and to avoid an API
special case for in-place conversion, which simply can't support
unaligned sources
- When populating guest_memfd memory, GUP the source page in common
code and pass the refcounted page to the vendor callback, instead
of letting vendor code do the heavy lifting. Doing so avoids a
looming deadlock bug with in-place due an AB-BA conflict betwee
mmap_lock and guest_memfd's filemap invalidate lock
Generic:
- Fix a bug where KVM would ignore the vCPU's selected address space
when creating a vCPU-specific mapping of guest memory. Actually
this bug could not be hit even on x86, the only architecture with
multiple address spaces, but it's a bug nevertheless"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (267 commits)
KVM: s390: Increase permitted SE header size to 1 MiB
MAINTAINERS: Replace backup for s390 vfio-pci
KVM: s390: vsie: Fix race in acquire_gmap_shadow()
KVM: s390: vsie: Fix race in walk_guest_tables()
KVM: s390: Use guest address to mark guest page dirty
irqchip/riscv-imsic: Adjust the number of available guest irq files
RISC-V: KVM: Transparent huge page support
RISC-V: KVM: selftests: Add Zalasr extensions to get-reg-list test
RISC-V: KVM: Allow Zalasr extensions for Guest/VM
KVM: riscv: selftests: Add riscv vm satp modes
KVM: riscv: selftests: add Zilsd and Zclsd extension to get-reg-list test
riscv: KVM: allow Zilsd and Zclsd extensions for Guest/VM
RISC-V: KVM: Skip IMSIC update if vCPU IMSIC state is not initialized
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_rw_attr()
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_has_attr()
RISC-V: KVM: Remove unnecessary 'ret' assignment
KVM: s390: Add explicit padding to struct kvm_s390_keyop
KVM: LoongArch: selftests: Add steal time test case
LoongArch: KVM: Add paravirt vcpu_is_preempted() support in guest side
LoongArch: KVM: Add paravirt preempt feature in hypervisor side
...
|
|
The rt_stall test measures the runtime ratio between an EXT and an RT
task pinned to the same CPU, verifying that the deadline server prevents
RT tasks from starving SCHED_EXT tasks. It expects the EXT task to get
at least 4% of CPU time.
The test is flaky because sched_stress_test() calls sleep(RUN_TIME)
immediately after fork(), without waiting for the RT child to complete
its setup (set_affinity + set_sched). If the RT child experiences
scheduling latency before completing setup, that delay eats into the
measurement window: the RT child runs for less than RUN_TIME seconds,
and the EXT task's measured ratio drops below the 4% threshold.
For example, in the failing CI run [1]:
EXT=0.140s RT=4.750s total=4.890s (expected ~5.0s)
ratio=2.86% < 4% → FAIL
The 110ms gap (5.0 - 4.89) corresponds to the RT child's setup time
being counted inside the measurement window, during which fewer
deadline server ticks fire for the EXT task.
Fix by using pipes to synchronize: each child signals the parent after
completing its setup, and the parent waits for both signals before
starting sleep(RUN_TIME). This ensures the measurement window only
counts time when both tasks are fully configured and competing.
[1] https://github.com/kernel-patches/bpf/actions/runs/21961895809/job/63442490449
Fixes: be621a76341c ("selftests/sched_ext: Add test for sched_ext dl_server")
Assisted-by: claude-opus-4-6-v1
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
- Add support for control flow integrity for userspace processes.
This is based on the standard RISC-V ISA extensions Zicfiss and
Zicfilp
- Improve ptrace behavior regarding vector registers, and add some
selftests
- Optimize our strlen() assembly
- Enable the ISO-8859-1 code page as built-in, similar to ARM64, for
EFI volume mounting
- Clean up some code slightly, including defining copy_user_page() as
copy_page() rather than memcpy(), aligning us with other
architectures; and using max3() to slightly simplify an expression
in riscv_iommu_init_check()
* tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: lib: optimize strlen loop efficiency
selftests: riscv: vstate_exec_nolibc: Use the regular prctl() function
selftests: riscv: verify ptrace accepts valid vector csr values
selftests: riscv: verify ptrace rejects invalid vector csr inputs
selftests: riscv: verify syscalls discard vector context
selftests: riscv: verify initial vector state with ptrace
selftests: riscv: test ptrace vector interface
riscv: ptrace: validate input vector csr registers
riscv: csr: define vtype register elements
riscv: vector: init vector context with proper vlenb
riscv: ptrace: return ENODATA for inactive vector extension
kselftest/riscv: add kselftest for user mode CFI
riscv: add documentation for shadow stack
riscv: add documentation for landing pad / indirect branch tracking
riscv: create a Kconfig fragment for shadow stack and landing pad support
arch/riscv: add dual vdso creation logic and select vdso based on hw
arch/riscv: compile vdso with landing pad and shadow stack note
riscv: enable kernel access to shadow stack memory via the FWFT SBI call
riscv: add kernel command line option to opt out of user CFI
riscv/hwprobe: add zicfilp / zicfiss enumeration in hwprobe
...
|
|
The _get_unused_cpus() function can return CPU numbers >= 16, which
exceeds RPS_MAX_CPUS in toeplitz.c. When this happens, the test fails
with a cryptic message:
# Exception| Traceback (most recent call last):
# Exception| File "/tmp/cur/linux/tools/testing/selftests/net/lib/py/ksft.py", line 319, in ksft_run
# Exception| func(*args)
# Exception| File "/tmp/cur/linux/tools/testing/selftests/drivers/net/hw/toeplitz.py", line 189, in test
# Exception| with bkg(" ".join(rx_cmd), ksft_ready=True, exit_wait=True) as rx_proc:
# Exception| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
# Exception| File "/tmp/cur/linux/tools/testing/selftests/net/lib/py/utils.py", line 124, in __init__
# Exception| super().__init__(comm, background=True,
# Exception| File "/tmp/cur/linux/tools/testing/selftests/net/lib/py/utils.py", line 77, in __init__
# Exception| raise Exception("Did not receive ready message")
# Exception| Exception: Did not receive ready message
Rename _get_unused_cpus() to _get_unused_rps_cpus() and cap the CPU
search range to RPS_MAX_CPUS.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260210093110.1935149-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The testcase failed as below:
$./vlan_bridge_binding.sh
...
+ adf_ip_link_set_up d1
+ local name=d1
+ shift
+ ip_link_is_up d1
+ ip_link_has_flag d1 UP
+ local name=d1
+ shift
+ local flag=UP
+ shift
++ ip -j link show d1
++ jq --arg flag UP 'any(.[].flags.[]; . == $flag)'
jq: error: syntax error, unexpected '[', expecting FORMAT or QQSTRING_START
(Unix shell quoting issues?) at <top-level>, line 1:
any(.[].flags.[]; . == $flag)
jq: 1 compile error
Remove the extra dot (.) after flags array to fix this.
Fixes: 4baa1d3a5080 ("selftests: net: lib: Add ip_link_has_flag()")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260211022146.190948-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in [1], iproute2 started rejecting tc-police burst sizes
that result in an overflow. This can happen when the burst size is high
enough and the rate is low enough.
A couple of test cases specify such configurations, resulting in
iproute2 errors and test failure.
Fix by reducing the burst size so that the test will pass with both new
and old iproute2 versions.
[1] https://lore.kernel.org/netdev/20250916215731.3431465-1-jay.vosburgh@canonical.com/
Fixes: cb12d1763267 ("selftests: mlxsw: tc_restrictions: Test tc-police restrictions")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/88b00c6e85188aa6a065dc240206119b328c46e1.1770643998.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
People keep removing generated files from .gitignore files even when the
files stay around. Please don't do that: just because the file is no
longer being generated doesn't make it magically go away, and doesn't
make it suddenly be something that should now not be ignored any more.
Fixes: dd2c6ec24fca ("selftests/mm: remove virtual_address_range test")
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull VFIO updates from Alex Williamson:
"A small cycle with the bulk in selftests and reintroducing poison
handling in the nvgrace-gpu driver. The rest are fixes, cleanups, and
some dmabuf structure consolidation.
- Update outdated mdev comment referencing the renamed
mdev_type_add() function (Julia Lawall)
- Introduce selftest support for IOMMU mapping of PCI MMIO BARs (Alex
Mastro)
- Relax selftest assertion relative to differences in huge page
handling between legacy (v1) TYPE1 IOMMU mapping behavior and the
compatibility mode supported by IOMMUFD (David Matlack)
- Reintroduce memory poison handling support for non-struct-page-
backed memory in the nvgrace-gpu variant driver (Ankit Agrawal)
- Replace dma_buf_phys_vec with phys_vec to avoid duplicate structure
and semantics (Leon Romanovsky)
- Add missing upstream bridge locking across PCI function reset,
resolving an assertion failure when secondary bus reset is used to
provide that reset (Anthony Pighin)
- Fixes to hisi_acc vfio-pci variant driver to resolve corner case
issues related to resets, repeated migration, and error injection
scenarios (Longfang Liu, Weili Qian)
- Restrict vfio selftest builds to arm64 and x86_64, resolving
compiler warnings on 32-bit archs (Ted Logan)
- Un-deprecate the fsl-mc vfio bus driver as a new maintainer has
stepped up (Ioana Ciornei)"
* tag 'vfio-v7.0-rc1' of https://github.com/awilliam/linux-vfio:
vfio/fsl-mc: add myself as maintainer
vfio: selftests: only build tests on arm64 and x86_64
hisi_acc_vfio_pci: fix the queue parameter anomaly issue
hisi_acc_vfio_pci: resolve duplicate migration states
hisi_acc_vfio_pci: update status after RAS error
hisi_acc_vfio_pci: fix VF reset timeout issue
vfio/pci: Lock upstream bridge for vfio_pci_core_disable()
types: reuse common phys_vec type instead of DMABUF open‑coded variant
vfio/nvgrace-gpu: register device memory for poison handling
mm: add stubs for PFNMAP memory failure registration functions
vfio: selftests: Drop IOMMU mapping size assertions for VFIO_TYPE1_IOMMU
vfio: selftests: Add vfio_dma_mapping_mmio_test
vfio: selftests: Align BAR mmaps for efficient IOMMU mapping
vfio: selftests: Centralize IOMMU mode name definitions
vfio/mdev: update outdated comment
|
|
selftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONT
In order to synchronize new processes to test inheritance of memfd_noexec
sysctl, memfd_test sets up the sysctl with a value before creating the new
process. The new process then sends itself a SIGSTOP in order to wait for
the parent to flip the sysctl value and send a SIGCONT signal.
This would work as intended if it wasn't the fact that the new process is
being created with CLONE_NEWPID, which creates a new PID namespace and the
new process has PID 1 in this namespace. There're restrictions on sending
signals to PID 1 and, although it's relaxed for other than root PID
namespace, it's biting us here. In this specific case the SIGSTOP sent by
the new process is ignored (no error to kill() is returned) and it never
stops its execution. This is usually not noticiable as the parent usually
manages to set the new sysctl value before the child has a chance to run
and the test succeeds. But if you run the test in a loop, it eventually
reproduces:
while [ 1 ]; do ./memfd_test >log 2>&1 || break; done; cat log
So this patch replaces the SIGSTOP/SIGCONT synchronization with IPC
semaphore.
Link: https://lkml.kernel.org/r/a7776389-b3d6-4b18-b438-0b0e3ed1fd3b@work
Fixes: 6469b66e3f5a ("selftests: improve vm.memfd_noexec sysctl tests")
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: liuye <liuye@kylinos.cn>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch adds a new testcase to validate memory failure handling for
dirty pagecache. This performs similar operations as clean pagecaches
except fsync() is not used to keep pages dirty.
This test helps ensure that memory failure handling for dirty pagecache
works correctly, including proper SIGBUS delivery, page isolation, and
recovery paths.
Link: https://lkml.kernel.org/r/20260206031639.2707102-4-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: kernel test robot <lkp@intel.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch adds a new testcase to validate memory failure handling for
clean pagecache. This test performs similar operations as anonymous pages
except allocating memory using mmap() with a file fd.
This test helps ensure that memory failure handling for clean pagecache
works correctly, including unchanged page content, page isolation, and
recovery paths.
Link: https://lkml.kernel.org/r/20260206031639.2707102-3-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601221142.mDWA1ucw-lkp@intel.com/
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/mm: add memory failure selftests", v4.
Introduce selftests to validate the functionality of memory failure.
These tests help ensure that memory failure handling for anonymous pages,
pagecaches pages works correctly, including proper SIGBUS delivery to user
processes, page isolation, and recovery paths.
Currently madvise syscall is used to inject memory failures. And only
anonymous pages and pagecaches are tested. More test scenarios, e.g.
hugetlb, shmem, thp, will be added. Also more memory failure injecting
methods will be supported, e.g. APEI Error INJection, if required.
This patch (of 3):
This patch adds a new kselftest to validate memory failure handling for
anonymous pages. The test performs the following operations:
1. Allocates anonymous pages using mmap().
2. Injects memory failure via madvise syscall.
3. Verifies expected error handling behavior.
4. Unpoison memory.
This test helps ensure that memory failure handling for anonymous pages
works correctly, including proper SIGBUS delivery to user processes, page
isolation and recovery paths.
Link: https://lkml.kernel.org/r/20260206031639.2707102-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20260206031639.2707102-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
ASPEED PCIe controller driver:
- Add ASPEED Root Complex DT binding and driver (Jacky Chou)
Freescale i.MX6 PCIe controller driver:
- Add DT binding and driver support for an optional external refclock
in addition to the refclock from the internal PLL (Richard Zhu)
- Fix CLKREQ# control so host asserts it during enumeration and
Endpoints can use it afterwards to exit the L1.2 link state
(Richard Zhu)
NVIDIA Tegra PCIe controller driver:
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear
down MSI domains to be built as modules (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
NVIDIA Tegra194 PCIe controller driver:
- Relax Kconfig so tegra194 can be built for platforms beyond
Tegra194 (Vidya Sagar)
Qualcomm PCIe controller driver:
- Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski)
- Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3,
IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated
schema (Krzysztof Kozlowski)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- dm-verity:
- various optimizations and fixes related to forward error correction
- add a .dm-verity keyring
- dm-integrity: fix bugs with growing a device in bitmap mode
- dm-mpath:
- fix leaking fake timeout requests
- fix UAF bug caused by stale rq->bio
- fix minor bugs in device creation
- dm-core:
- fix a bug related to blkg association
- avoid unnecessary blk-crypto work on invalid keys
- dm-bufio:
- dm-bufio cleanup and optimization (reducing hash table lookups)
- various other minor fixes and cleanups
* tag 'for-7.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (35 commits)
dm mpath: make pg_init_delay_msecs settable
Revert "dm: fix a race condition in retrieve_deps"
dm mpath: Add missing dm_put_device when failing to get scsi dh name
dm vdo encodings: clean up header and version functions
dm: use bio_clone_blkg_association
dm: fix excessive blk-crypto operations for invalid keys
dm-verity: fix section mismatch error
dm-unstripe: fix mapping bug when there are multiple targets in a table
dm-integrity: fix recalculation in bitmap mode
dm-bufio: avoid redundant buffer_tree lookups
dm-bufio: merge cache_put() into cache_put_and_wake()
selftests: add dm-verity keyring selftests
dm-verity: add dm-verity keyring
dm: clear cloned request bio pointer when last clone bio completes
dm-verity: fix up various workqueue-related comments
dm-verity: switch to bio_advance_iter_single()
dm-verity: consolidate the BH and normal work structs
dm: add WQ_PERCPU to alloc_workqueue users
dm-integrity: fix a typo in the code for write/discard race
dm: use READ_ONCE in dm_blk_report_zones
...
|
