| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This includes a significant number of low-priority fixes - especially
in the NIC drivers area - that we deferred from the last few RCs in
the previous cycle, which can't be easily outlined in the synopsis
below.
Core & protocols:
- Continue the work on removing rtnl_lock dependencies:
- per-netns ARP and ND neighbour tables, with the default settings
now configurable per netns (inheritance from init_net is
controlled by the new net.core.neigh_inherit_init_net sysctl)
- RCU-protected configuration and rtnl_lock-less fill_info() for
hsr, netkit, sit, vlan and vxlan devices
- per-netns device unregistration for ip tunnel and gre devices
- use the netdev instance lock instead of rtnl_lock when reading
speed and duplex via sysfs
- batch the flushing of uncached routes at device unregistration
time, relieving rtnl_lock contention on netns dismantle.
- Add hardware pacing offload support, admin-controlled via a new
rtnetlink attribute, with sch_fq integration (implemented in idpf).
- Re-segment BIG TCP GSO packets into GSO packets fitting the egress
device limits instead of plain MSS-sized segments, improving
throughput for mixed BIG TCP / non-BIG TCP paths by up to 70%.
- Generate RSS keys that spread flows over all the RX queues; the
previous random keys could leave some queues unused.
- Optimize the bridge VLAN forwarding paths: cache the port-VLAN in
fdb entries and consider only VLAN members when flooding, for ~10%
more Mpps in the fdb forwarding path.
- A few TCP/IP performance improvements aimed at efficient cache
usage and reducing contention.
- Add the TCP ROCCET congestion control, a CUBIC variant aimed at
avoiding bufferbloat in cellular networks.
- Continue the conversion of getsockopt callbacks to sockopt_t.
- Add an ethtool command to list the front-facing ports of an
interface, including SFP cages and modules, using the phy_port
representation.
- Enable BIG TCP support for bareudp tunnels.
- Remove the IPV6_ADDRFORM socket option and disallow buggy TCP state
transitions (listen() + shutdown() + connect() and connect() +
connect(AF_UNSPEC) + listen()).
- Remove most BUG_ON()s from core packet processing, replacing them
with error paths.
Wireless:
- Latency improvements, including lockless station get/dump and
beacon updates, plus RTNL reduction and locking cleanups.
- Infrastructure for non-station TX/RX with MLO.
- NAN (Wi-Fi Aware) Instant Communication support and other NAN
improvements.
- Control frame Integrity Protocol (CIP) and protected TWT support.
- Improvements for AP regulatory checks.
Netfilter:
- Disable br_netfilter in user namespaces and schedule it for removal
in 2027.
- Restrict the raw table in nft_compat to the specific family, hook
and priority.
- Prepare the flowtable for mixed IPv4-over-IPv6 tunneling (and vice
versa).
- Use GFP_KERNEL_ACCOUNT for most netfilter allocations, for better
integration with memcg.
- Allow discovering conntrack zone filtering support in ctnetlink
dumps, and fix nfnetlink_hook handling of large dumps.
Deletions:
- Move the LLC type 2 sockets out of tree. There are no known users
and the code attracts a never-ending stream of LLM-driven fixes.
Device drivers:
- New drivers:
- Meta Platforms NIC (mpnic), the second-generation NIC from Meta
- initial skeleton of the Nebula-matrix NICs driver (nbl)
- X-Powers AC200/AC300 Fast Ethernet PHYs
- Ethernet high-speed NICs:
- Intel:
- i40e: XDP metadata support for RX hash and VLAN tag
- ice: expose the E825 TSPLL state via the DPLL subsystem
- nVidia/Mellanox:
- move the data direct infrastructure from IB to core, in
preparation for netdev support.
- reduce the memory used per offloaded TC rule
- Meta (fbnic):
- support large io_uring zero-copy RX buffers
- Microsoft vNIC (mana):
- add BQL support
- Ethernet NICs consumer, and embedded:
- Airoha:
- LRO offload support
- Cadence (macb):
- context swapping for ringparam and MTU changes, avoiding
buffer loss under memory pressure
- Mucse (rnpgbe):
- TX/RX and link status support
- NXP (enetc):
- SR-IOV improvements and VF support for ENETC v4
- Qualcomm (ppe):
- IPQ5424 support
- Realtek PCI (r8169):
- phylink support
- RSS support for RTL8127
- Renesas (ravb):
- gPTP support for R-Car Gen4
- Synopsys (stmmac):
- XDP multi-buffer support on the TX side
- tc mqprio hw queue priority offload
- support for RK3568 SGMII, Allwinner H616 EMAC1, UltraRISC
DP1000 and Qualcomm sa8255p
- Ethernet switches:
- Mediatek (mt7530):
- fast age and change conduit support
- Microchip (ksz):
- support for KSZ8995XA/KS8995XA
- Microchip (lan966x):
- PCIe FDMA support, ~20x throughput increase in PCIe endpoint
- Microchip (sparx5):
- Time Aware Shaper (taprio) offload
- Motorcomm (yt921x):
- LED and SerDes PCS support
- Realtek (rtl8365mb):
- EEE support
- Ethernet PHYs:
- Broadcom:
- enable jumbo frames on BCM54xx
- Realtek:
- support for RTL8261CE_CG and RTL8261D_VM
- MDIO support for RTL838x and RTL839x
- WiFi drivers:
- Broadcom (brcmfmac):
- FT/OKC roaming offload
- Intel (iwlwifi):
- UHR sniffer support
- support for newer UEFI/BIOS tables
- MediaTek (mt76):
- mt7925 NAN improvements
- offchannel/scan improvements and MLO fixes
- Morse Micro (mm81x):
- monitor mode support
- Qualcomm (ath12k):
- IPQ5332 platform infrastructure
- Realtek (rtw88):
- RTL8723BS support
- SDIO TX performance improvements
- Realtek (rtw89):
- P2P_DEVICE support
- BT-coex updates for RTL8922D
- Bluetooth:
- move H:4 reassembly into the Bluetooth core
- add generic support for vendor packets
- MGMT: add security level changed event
- Bluetooth drivers:
- btusb: support Bulk Serialization Mode
- Intel: support Draco and Titan Lake, allow unsigned firmware
- Mediatek: MT7928 support
- Qualcomm: QCC2072 support
- Broadcom: Synaptics 4384 support"
* tag 'net-next-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2126 commits)
Bluetooth: btusb: disable by default Qualcomm multi-subsystem
tipc: fix broadcast sender hang on last acker departure
tipc: fix use-after-free of broadcast reception link at node release
r8169: clear TX LPI on RTL8168h at link up after phylink conversion
tun: Require CAP_NET_ADMIN to attach to an ownerless device
net/sched/sch_cake: drop dead nla_nest_end() error check
net/sched/sch_cake: widen buffer_used to u64
net/sched/sch_cake: reduce parent backlog when clearing a tin
net/sched/sch_cake: serialize reconfiguration with the datapath
tg3: Add Datto SIRIS 5 1U Server to restart AER quirk table
net/mlx5e: Stop asserting for RTNL when closing channels
net: shrink the payload-only part of skb dataref to one bit
net: wwan: iosm: validate msg_head before indexing msg_ring
net: bgmac: rate limit RX error messages
selftests: net: veth: test XDP_TX to a peer with GRO enabled
veth: schedule the peer's NAPI after XDP_TX when only GRO is enabled
pppoe: delete session hash entries by pointer match
net: lan969x: don't disable hardirqs in fdma tx clear
net: sparx5/lan969x: do not clobber the PSFP cycle timer update period
net: lan969x: fix DSM calendar for empty taxis
...
|
|
This is long over-due: the __get_user() and __put_user() functions are
entirely historical, and are never the rigth thing to use any more. And
when mis-used (read: every case) they are not only slower than the right
thing, but also insecure because they don't check the user address
range.
Most of the usage sites have been converted long ago, but various
left-overs remained. So this started out as a single patch that I wrote
as a "show people how to convert __{get,put}_user() to modern code".
In particular, Thomas last year implemented the very nice new scoped
user access region helpers (see commit e497310b4ffb: "uaccess: Provide
scoped user access regions") that makes the modern interfaces
particularly easy to use and really removes any excuse for the old
horrors.
That small example patch then grew to this, partly using Claude as a
glorified coccinelle script to apply the pattern to other places.
There were a few different reasons for using __put_user() and
__get_user() rather than the alternatives, but the original historical
one was performance: when doing multiple accesses off the same base
pointer, doing a single range check followed by multiple non-checked
accesses used to create smaller and faster code.
The keyword here is "used to". It hasn't been true for years, because
the range check isn't actually the real cost these days. The real cost
of user accesses on modern hardware is turning the user accesses on and
off in the first place (on x86, using the STAC/CLAC instructions).
Those sequences get turned into 'scoped_user_read_access() { }' blocks,
see for example that first patch in the series: "signal: use scoped user
access for old-style sigaction".
Another, historical reason for using __get_user() and friends is that
you actually want to do a kernel pointer access, but the pointer might
not be entirely reliable (typically during fault handling), so you want
to have exception handling for the kernel access.
The modern way to do that kind of non-faulting kernel access is using
"get_kernel_nofault()", but some code predates that helper existing at
all, and used __get_user() as a way to just get a memory access with
exception handling. For that pattern, see for example "alpha: use
get_kernel_nofault() in dik_show_code()"
A third bad reason for using __get_user() and friends was that the
proper get_user() had a "might_fault()" in it, and code that ran in
atomic regions but hadn't disabled page faults would result in a
warning. That kind of code needs to explicitly disable page faults,
because "atomic region" is not well defined at run-time and can be
invisible (eg a preempt-off region in a non-preemptible kernel).
See "vdpa_sim: disable page faults around vringh_need_notify_iotlb()"
for an example of that pattern, where the local_bh_disable() now also
grows a pagefault_disable(), which makes the normal get_user() no longer
warn about the user access in non-process context, because it can see
that the potential page fault will not cause problems.
And finally, the really nasty reason to use __get_user() and friends:
pointers that can be either kernel pointers or user pointers. We've
gotten rid of almost all such cases, but a couple remained. See for
example "x86/sev: Use explicit user-or-kernel accessors for #VC memory
operands".
NOTE! This series removes all __get/put_user() calls from generic code
but only does the final removal of the whole interface on x86. Other
architectures have not been entirely converted, for a variety of reasons:
- arm64 makes __{get,put}_user() be exactly the same as
{get,put}_user() so it's harmless and didn't have the dangers of the
legacy use cases.
- any architecture that uses <asm-generic/uaccess.h> will still use
__{get,put}_user as the underlying helper function name
- several architectures had some legacy uses that weren't entirely
trivial and I didn't want to extend this patch series to things that
I don't know and that don't really matter.
but I did do a couple of the obvious "follows the exact same pattern"
just because it could be done mindlessly and automatically.
Let's see if I broke anything, but we should have done this years ago.
* uaccess-cleanups: (48 commits)
drm/i915/gem: ignore errors on presumed_offset write-back
powerpc/align: use get_user_instr() for a user-mode instruction
powerpc/signal64: use scoped user access in setup_trampoline()
powerpc/signal64: use get_user() for the single context reads
powerpc/signal32: use get_user() for the single context reads
KVM: PPC: Book3S HV: use get_user()/put_user() for the HPT fd
powerpc/powernv: use get_user()/put_user() in the LPC debugfs files
s390: use get_user()/put_user() instead of the unchecked variants
ARM: OABI: use scoped user access in epoll_put_uevent()
ARM: signal: stop using __put_user() for the signal frame
ARM: signal: check the FDPIC function descriptor address
alpha: split the prefetch check in do_page_fault() by mode
openrisc: use get_kernel_nofault() in show_registers()
alpha: use get_kernel_nofault() in dik_show_code()
nios2: use scoped user access for the signal frame
nios2: check the signal frame address before writing to it
hexagon: use scoped user access for the signal frame
alpha: use scoped user access when setting up signal frames
alpha: use scoped user access in the sigreturn path
alpha: use scoped user access in osf_sigaction()
...
|
|
____sys_recvmsg() writes msg_flags and msg_controllen back with
__put_user(), and the compat sendmmsg()/recvmmsg() loops write msg_len
the same way. None of these has an access_ok() of its own: they rely on
the earlier copy_from_user() of the message header having checked the
range. For the compat msg_len that is not even true, since msg_len
lives after the compat_msghdr that was copied. It is only safe because
compat pointers are 32-bit. The native mmsg paths already use
put_user().
Use put_user() everywhere. On x86 that adds a couple of instructions to
check the address, on a path that has to enable and disable user access
for each write anyway.
This is part of getting rid of __get_user() and __put_user() entirely.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
sock_sendmsg_nosec() runs in syscall context but calls BUG_ON() if
proto_ops->sendmsg() returns -EIOCBQUEUED. Crashing the kernel on an
unexpected return value is dangerous for production workloads.
This risk is real: any signed integer overflow in a sendmsg handler
that returns 0xfffffdef (-529, -EIOCBQUEUED) triggers this BUG_ON. In
one month, two such bugs were reported in PF_PACKET, reachable by
a local user with CAP_NET_RAW in a user namespace:
- Commit 73e594c19b4f ("af_packet: Don't cast tpacket_hdr.tp_len to int
in tpacket_parse_header().")
- In review ("net/packet: prevent TX_RING byte count overflow")
https://lore.kernel.org/netdev/20260925124829.6595-1-ilkka.lappetelainen@gmail.com/
Replace the BUG_ON with DEBUG_NET_WARN_ON_ONCE() to retain debug and
syzbot coverage, and return -EIO so that -EIOCBQUEUED does not leak to
userspace or trigger the BUG_ON(ret == -EIOCBQUEUED) in VFS callers of
sock_write_iter() such as new_sync_write().
Failing gracefully is safe because the original reason for the BUG_ON
is gone. It was added in commit 599bd19bdc4c ("fs: don't allow to complete
sync iocbs through aio_complete") and commit d8725c86aeba ("get rid of the
size argument of sock_sendmsg()") to prevent an async completion from
corrupting a caller's on-stack kiocb. Commit 1b784140474e ("net: Remove
iocb argument from sendmsg and recvmsg") removed that on-stack kiocb.
More recently commit fcc77d33a34c ("net: Remove support for AIO on
sockets") removed socket AIO support entirely.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260928020420.3097018-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert to const struct mnt_idmap.
A mount's idmapping is immutable. The only thing that is allowed to be
modified afterwards is the reference count and that is hidden behind
mnt_idmap_get() and mnt_idmap_put(). Everything else only ever reads
from the idmapping. This is the same model that struct cred uses and the
idmapping is also rather sensitive.
So make the idmap argument const wherever we can. The conversion is done
from the bottom up so callers can continue to pass a non-const pointer
to a const parameter until the conversion is finished.
No functional changes.
Link: https://patch.msgid.link/20260901-work-idmap-const-v1-24-54ccd48e100b@kernel.org
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Seth Forshee <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Convert to const struct mnt_idmap.
A mount's idmapping is immutable. The only thing that is allowed to be
modified afterwards is the reference count and that is hidden behind
mnt_idmap_get() and mnt_idmap_put(). Everything else only ever reads
from the idmapping. This is the same model that struct cred uses and the
idmapping is also rather sensitive.
So make the idmap argument const wherever we can. The conversion is done
from the bottom up so callers can continue to pass a non-const pointer
to a const parameter until the conversion is finished.
No functional changes.
Link: https://patch.msgid.link/20260901-work-idmap-const-v1-13-54ccd48e100b@kernel.org
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Seth Forshee <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Some getsockopt options size their reply from a count the caller left in
optval rather than from optlen, and so write past the optlen the caller
declared. Userspace relies on that, so the sockopt_t conversion has to
keep doing it.
IP_MSFILTER is the first one to convert: its reply covers the
imsf_numsrc sources the caller asked for, while optlen only has to cover
the fixed header.
Add sockopt_expand_out() to grow opt->iter_out mid-air, so the quirk
sits in one place instead of each protocol assuming it implicitly. It is
a no-op unless the reply outruns optlen. Growing re-anchors the iterator
at the head of optval, so it has to be called before anything is written
through iter_out.
Only a user buffer can be longer than optlen says. A kernel-backed
optval keeps the bounded iterator, and a callback that asks to grow one
gets a WARN_ON_ONCE() and -EINVAL.
Nothing in tree can trip that WARN: the only kernel-backed path into
do_ip_getsockopt() is sol_ip_sockopt(), which takes IP_TOS and
IP_TRANSPARENT only. It is an assert for the in-kernel callers BPF and
io_uring gain once the conversion is done, so they declare an optlen
covering the whole buffer instead of repeating the userspace mistake.
The conversion in the next patch calls sockptr_to_sockopt() from
net/ipv4/, so drop its static and declare it in net.h.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260914-getsockopt_phase6-v2-1-e48befc9602e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
socketpair() writes the reserved descriptor numbers to userspace before
creating the sockets and their file objects. A later failure therefore
leaves a modified caller's array despite returning an error, contrary to
POSIX. For example, socketpair(AF_UNIX, SOCK_STREAM, -1, fd) returns
EPROTONOSUPPORT but replaces the array's sentinel values with unused fd
numbers.
Defer the output stores until both file objects have been created, before
installing either descriptor. If a store faults, drop both file references
before releasing the reserved descriptor slots. Keep the early descriptor
reservation and the existing setup-failure cleanup paths.
In practice, I doubt anyone notices. But this aligns with the expected
behavior
Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Link: https://patch.msgid.link/JyK226D0S5CWGUpAC4MO4A@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Daniel Borkmann:
"Major changes:
- Redesign the verifier error reporting: failures now carry source
and instruction annotations along with the causal event history
that led to them, making program rejections far easier to debug and
repair (Kumar Kartikeya Dwivedi)
- Add arena argument support to kfuncs and struct_ops through the new
__arena and __arena__nullable suffixes (Tejun Heo, Puranjay Mohan,
Kumar Kartikeya Dwivedi, Ihor Solodrai)
- Signed BPF program loader rework to accommodate both BPF and
security community needs where the kernel runs the signature
verification at BPF_PROG_LOAD time before the LSM admission hook
(Daniel Borkmann)
- Add a set of ksock kfuncs which let BPF LSM and syscall programs
create, connect and send on UDP sockets in order to emit telemetry
data (Mahe Tardy)
- Unify helper and kfunc call argument verification and classify
kfunc arguments purely from BTF into a generated bpf_func_proto
which is computed once at add-call time (Amery Hung)
Other features and fixes:
- Enable EXECMEM_ROX_CACHE for BPF allocations on x86 (Mike Rapoport)
- Add bidirectional VLAN support to bpf_fib_lookup() through the new
BPF_FIB_LOOKUP_VLAN and BPF_FIB_LOOKUP_VLAN_INPUT flags (Avinash
Duduskar)
- Infer zext_dst from static register liveness analysis to fix 32-bit
zero-extension semantics, and remove the artificial limitations on
pointer types eligible for spilling (Eduard Zingerman)
- Inline the numeric open-coded iterator kfuncs so that bpf_for()
loops no longer pay a kfunc call on every iteration (Puranjay
Mohan)
- Add an arena-based bitmap data structure to libarena along with
serial and parallel selftests (Emil Tsalapatis)
- Teach resolve_btfids to discover kfuncs from the kernel's BTF ID
sets and to emit kfunc BTF decl tags, reducing the kernel build's
dependency on pahole features (Ihor Solodrai)
- Add BPF_F_ADJ_ROOM_DECAP_* flags to bpf_skb_adjust_room() so that
tunnel decapsulation can update the GSO and encapsulation state of
the skb (Nick Hudson)
- Fix the ring buffer pending_pos walk and the available-data
accounting on 32-bit position wrap (Israel Téllez García)
- Add memory usage accounting for arena maps and fix an mmap_lock
deadlock on arena lock failure (Jiayuan Chen)
- Add tracing_multi link info support to the kernel UAPI and bpftool,
and refactor the stack map code to run with preemption disabled
(Jiri Olsa)
- Support BPF_F_EGRESS in bpf_redirect_peer() to emit the skb in the
egress direction of the target's peer device (Jordan Rife)
- Add a KF_SPINLOCK_SAFE kfunc flag so that providers, in particular
modules, can declare kfuncs safe to call under bpf_spin_lock
instead of relying on the verifier's hard-coded allowlist (Kaitao
Cheng)
- Introduce global percpu data for BPF programs with libbpf probing
and bpftool skeleton support, and stop exposing uninitialized
kernel heap memory when copying per-CPU map values (Leon Hwang)
- Add s390 JIT support for load-acquire and store-release
instructions (Maxim Khmelevskii)
- Fix a CFI mismatch in the task work callback and an arm64 KASAN
false positive after bpf_throw() (Mykyta Yatsenko)
- Reject writes through untrusted BTF pointers and bound the
rdonly/rdwr_buf_size kfunc arguments (Nicholas Dudar)
- Invalidate RCU pointers only after the final spin unlock and
account for preempt and IRQ disabled regions as overlapping RCU
protection (Ning Ding)
- Support mixing bpf2bpf calls and tail calls on RV64, add signed
operations and 32-bit atomics to the RV32 JIT, and add timed
may_goto support (Pu Lehui, Kuan-Wei Chiu, Feng Jiang)
- Fix a use-after-free on mm_struct in bpf_find_vma() for foreign
tasks and an mmap_lock leak in the irq_work path (Sanghyun Park)
- Populate mmap-able BPF array map memory lazily which makes mmap()
O(1) instead of proportional to the map size (Song Liu)
- Introduce a jit_required flag and reject programs with inlined
helpers when no JIT is available, where the interpreter would
otherwise jump into an invalid address (Tiezhu Yang)
- Fix the x86 JIT per-CPU address resolution into an extended
register where the REX prefix dropped the high destination register
bit (Vineet Gupta)
- Reject MEM_ALLOC BTF accesses past object bounds, arena frees below
the arena base, and mixed arena and ordinary atomic paths (Yiyang
Chen)
- Fix the trampoline handling of 128-bit arguments and of return
values larger than 8 bytes (Yonghong Song)
- Ensure that any fault prone load is rewritten with exception table
handling, and fix the arena load-acquire and atomic fetch handling
in the x86, arm64, riscv and s390 JITs (Daniel Borkmann)
- Many more fixes and cleanups across the verifier, arena,
trampolines, sockmap, cgroup, ring buffer, x86/arm64/riscv/s390
JITs, libbpf, bpftool, resolve_btfids and selftests"
* tag 'bpf-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (373 commits)
selftests/bpf: Add tests for a store on a fault prone qdisc pointer
selftests/bpf: Add tests for fault prone loads out of RCU pointers
selftests/bpf: Add tests for pointer type merge at a shared load
selftests/bpf: Remove duplicate copies of the arena spinlock qnodes
selftests/bpf: Retry stat generation in cgroup_iter_memcg
selftests/bpf: Test pseudo-function policy diagnostics
bpf: Distinguish function references in policy diagnostics
bpf: Preserve source attribution without source text
selftests/bpf: Test kfunc argument diagnostics
bpf: Correct kfunc argument diagnostics
bpf: Use canonical stack argument names in diagnostics
bpf: Preserve R0 lineage across helper calls
selftests/bpf: Exercise negative optlen in cgroup getsockopt hook
bpf: Reject negative optlen in cgroup getsockopt hook
selftests/bpf: tc_tunnel - validate decap GSO and encapsulation state
bpf: Clear decap state on skb_adjust_room shrink path
bpf: Allow new DECAP flags and add guard rails
bpf: Add BPF_F_ADJ_ROOM_DECAP_* flags for tunnel decapsulation
bpf: Refactor masks for ADJ_ROOM flags and encap validation
bpf: Name the enum for BPF_FUNC_skb_adjust_room flags
...
|
|
Add a helper that connects an existing socket while invoking the LSM
hook. Reuse it in __sys_connect_file() to avoid duplicating the connect
logic. Other socket operations have equivalent helpers that trigger the
appropriate LSM hooks that can be reused, this one was the only one
missing. This will be used in the next commit for a new BPF kfunc that
needs to connect a socket and trigger the LSM hook.
Signed-off-by: Mahe Tardy <mahe.tardy@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20260813110540.103550-2-mahe.tardy@gmail.com
|
|
In c8db08110cbe ("Merge tag 'vfs-7.1-rc1.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs")
we added support for extended attributes for sockets. This comes in two
flavors: sockfs and non-sockfs/filesystem sockets. Filesystem sockets
are actual filesystem objects so reading xattrs must use dedicated fs
helpers such as bpf_get_dentry_xattr() and bpf_get_file_xattr(). Those
are inherently sleeping operations. Sockfs sockets on the other hand
don't need to use sleeping operations as the underlying data structure
is lockless. In addition, retrieval of sockfs extended attributes often
happens from LSM hooks that only provide struct socket and it's
completely nonsensical to grab a reference to a file, then force a
sleeping operation to retrieve the xattr and drop the reference. We know
that the sockfs file cannot go away while the LSM hook runs.
This series adds a bpf_sock_read_xattr() kfunc that, given a struct
socket, reads a user.* extended attribute from the socket's sockfs inode
into a bpf_dynptr. Together with fsetxattr() from userspace this lets a
process label a socket with a user.* xattr and have a BPF LSM program
retrieve that label locklessly. The kfunc mirrors the existing
bpf_cgroup_read_xattr(), including the restriction to the user.*
namespace.
systemd uses user.* xattrs on sockets to implement socket rate limiting
and to tag sockets for other purposes [1] such as implementing a varlink
registry. There is currently no efficient way for a BPF program to read
those labels back. The new helper allows a listening socket marked with
an extended attribute to be read back during bind/connect and then act
on the connect()ing socket. Extended attributes make it possible to
allow an unprivileged user manager such as systemd --user to mark
sockets from userspace and then rediscover them or implement policies.
The kfunc is registered KF_RCU and only for BPF LSM programs. A struct
socket is only guaranteed to live in sockfs when an LSM socket hook hands
it out, which is what keeps SOCK_INODE() valid. Sockets that embed struct
socket outside sockfs (tun, tap) are only reachable from tracing programs
and are excluded by the registration. (Btw, for consistency it would
be nice to force allocation of struct socket from sockfs instead of
simply embedding it in e.g., struct tun_file which makes the SOCKFS_I()
pattern a hazard - at least outside of sockfs functions.)
The read never sleeps and takes no lock. For sockfs the value lives in
the inode's in-memory xattr store and simple_xattr_get() resolves it
with an RCU-protected rhashtable lookup, taking neither the inode lock
nor any xattr lock. The kfunc is therefore usable from both sleepable
and non-sleepable LSM hooks.
Link: https://github.com/systemd/systemd/pull/40559 [1]
Link: https://patch.msgid.link/20260617-work-bpf-sock-xattr-v1-1-a1276f7c9da3@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Drop support for off-CPU cryptography in af_alg
- Document that af_alg is *always* slower
- Document the deprecation of af_alg
- Remove zero-copy support from skcipher and aead in af_alg
- Cap AEAD AD length to 0x80000000 in af_alg
- Free default RNG on module exit
Algorithms:
- Fix vli multiplication carry overflow in ecc
- Drop unused cipher_null crypto_alg
- Remove unused variants of drbg
- Use lib/crypto in drbg
- Use memcpy_from/to_sglist in authencesn
- Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
- Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode
- Filter out async aead implementations at alloc in krb5
- Fix non-parallel fallback by rstoring callback in pcrypt
- Validate poly1305 template argument in chacha20poly1305
Drivers:
- Add sysfs PCI reset support to qat
- Add KPT support for GEN6 devices to qat
- Remove unused character device and ioctls from qat
- Add support for hw access via SMCC to mtk
- Remove prng support from crypto4xx
- Remove prng support from hisi-trng
- Remove prng support from sun4i-ss
- Remove prng support from xilinx-trng
- Remove loongson-rng
- Remove exynos-rng
Others:
- Remove support for AIO on sockets"
* tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (196 commits)
crypto: tegra - fix refcount leak in tegra_se_host1x_submit()
crypto: rng - Free default RNG on module exit
crypto: testmgr - allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
hwrng: jh7110 - fix refcount leak in starfive_trng_read()
crypto: atmel-ecc - drop dead code in atmel_ecdh_max_size
crypto: cavium/cpt - fix DMA cleanup using wrong loop index
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
MAINTAINERS: make myself the maintainer of the Qualcomm QCE driver
crypto: amcc - convert irq_of_parse_and_map to platform_get_irq
crypto: sun4i-ss - Remove insecure and unused rng_alg
hwrng: xilinx - Move xilinx-rng into drivers/char/hw_random/
crypto: xilinx-trng - Replace crypto_drbg_ctr_df() with HMAC-SHA512
crypto: xilinx-trng - Fix return value of xtrng_hwrng_trng_read()
crypto: xilinx-trng - Remove crypto_rng interface
crypto: exynos-rng - Remove exynos-rng driver
hwrng: hisi-trng - Move hisi-trng into drivers/char/hw_random/
crypto: hisi-trng - Remove crypto_rng interface
crypto: loongson - Remove broken and unused loongson-rng
crypto: crypto4xx - Remove insecure and unused rng_alg
crypto: qat - validate RSA CRT component lengths
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull simple_xattr updates from Christian Brauner:
"This reworks the simple xattr api to make it more efficient and easier
to use for all consumers.
The simple_xattr hash table moves from the inode into a per-superblock
cache, removing the per-inode overhead for the common case of few or
no xattrs. The interface now passes struct simple_xattrs ** so lazy
allocation is handled internally instead of by every caller, kernfs
xattr operations on kernfs nodes shared between multiple superblocks
are properly serialized, and tmpfs constructs "security.foo" xattr
names with kasprintf() instead of kmalloc() plus two memcpy()s.
A follow-up fix links kernfs nodes to their parent before the LSM init
hook runs: with the per-sb cache kernfs_xattr_set() computes the cache
via kernfs_root(kn), which faulted on a freshly allocated node when
selinux_kernfs_init_security() called into it - reproducible as a NULL
pointer dereference on the first cgroup mkdir on SELinux-enabled
systems.
On top of this bpffs gains support for trusted.* and security.* xattrs
so that user space and BPF LSM programs can attach metadata - for
example a content hash or a security label - to pinned objects and
directories and inspect it uniformly like on other filesystems. The
store is in-memory and non-persistent, living only for the lifetime of
the mount like everything else in bpffs"
* tag 'vfs-7.2-rc1.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
bpf: Add simple xattr support to bpffs
kernfs: link kn to its parent before the LSM init hook
simpe_xattr: use per-sb cache
simple_xattr: change interface to pass struct simple_xattrs **
tmpfs: simplify constructing "security.foo" xattr names
kernfs: fix xattr race condition with multiple superblocks
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc8).
Conflicts:
drivers/net/ethernet/wangxun/txgbe/txgbe_aml.c
f67aead16e85 ("net: txgbe: rework service event handling")
57d39faed4c9 ("net: txgbe: improve functions of AML 40G devices")
net/rds/info.c
512db8267b73 ("rds: mark snapshot pages dirty in rds_info_getsockopt()")
6e94eeb2a2a6 ("rds: convert to getsockopt_iter")
Adjacent changes:
include/net/sock.h
1ee90b77b727 ("net: guard timestamp cmsgs to real error queue skbs")
f0de88303d5e ("net: make is_skb_wmem() available to modules")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb
from sk_error_queue. That assumption is not true for AF_PACKET sockets:
outgoing packet taps are also delivered to packet sockets with
skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET
instead of struct sock_exterr_skb.
If such an skb is received with timestamping enabled, the generic
timestamp cmsg path can read AF_PACKET control-buffer state as
sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop
counter overlaps opt_stats. An odd drop count makes the path emit
SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear
skbs this copies past the linear head and can trigger hardened usercopy or
disclose adjacent heap contents.
Keep skb_is_err_queue() local to net/socket.c, but make it verify that
the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor
installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal
receive ownership and no longer pass as error-queue skbs, while legitimate
sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free
ownership.
Fixes: 8605330aac5a ("tcp: fix SCM_TIMESTAMPING_OPT_STATS for normal skbs")
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260607021819.49698-1-kylebot@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the hash table to the super block to remove excessive overhead in case
of small number of xattrs per inode.
Add linked list to the inode, used for listxattr and eviction. Listxattr
uses rcu protection to iterate the list of xattrs.
Before being made per-sb, lazy allocation was protected by inode lock. Now
inode lock no longer provides sufficient exclusion, so use cmpxchg() to
ensure atomicity.
Though I haven't found a description of this pattern, after some research
it seems that cmpxchg_release() and READ_ONCE() should provide the
necessary memory barriers.
Use simple_xattr_free_rcu() in simple_xattrs_free(). This is needed because
the hash table is now shared between inodes and lookup on a different inode
might be running the compare function on the just freed element within the
RCU grace period.
Following stats are based on slabinfo diff, after creating 100k empty
files, then adding a "user.test=foo" xattr to each:
v7.0 (no rhashtable):
File creation: 993.40 bytes/file
Xattr addition: 79.99 bytes/file
v7.1-rc2 (per-inode rhashtable):
File creation: 939.73 bytes/file
Xattr addition: 1296.08 bytes/file
v7.1-rc2 + this patch (per-sb rhashtable)
File creation: 946.84 bytes/file
Xattr addition: 111.86 bytes/file
The overhead of a single xattr is reduced to nearly v7.0 levels. The per
xattr overhead is slightly larger due to the addition of three pointers to
struct simple_xattr.
Fixes: b32c4a213698 ("xattr: add rhashtable-based simple_xattr infrastructure")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://patch.msgid.link/20260605135322.2632068-5-mszeredi@redhat.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Change the simple_xattr API to accept pointer-to-pointer (struct
simple_xattrs **) instead of pointer. This allows the functions to handle
lazy allocation internally without requiring callers to use
simple_xattrs_lazy_alloc().
The simple_xattr_set(), simple_xattr_set_limited() and simple_xattr_add()
functions now handle allocation when xattrs is NULL. simple_xattrs_free()
now also frees the xattrs structure itself and sets the pointer to NULL.
This simplifies callers and removes the need for most callers to explicitly
manage xattrs allocation and lifetime.
In shmem_initxattrs(), the total required space for all initial xattrs
(ispace) is pre-calculated and deducted from sbinfo->free_ispace.
Since this patch modifies the function to add new xattrs directly to the
inode's &info->xattrs list rather than using a local temporary variable, a
failure means that the partially populated info->xattrs list remains
attached to the inode.
When the VFS caller handles the -ENOMEM error, it drops the newly created
inode via iput(), shmem_free_inode() adds freed to sbinfo->free_ispace a
second time, permanently inflating the tmpfs free space quota.
Fix by substracting already added xattrs from ispace.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://patch.msgid.link/20260605135322.2632068-4-mszeredi@redhat.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
The only user of msg->msg_iocb was AF_ALG, but that's deprecated.
It can be removed entirely at the cost of only supporting synchronous
operations. This doesn't break userspace, which will silently block
(for a bounded amount of time) in io_submit instead of operating
asynchronously.
This also makes struct msghdr smaller, helping every other caller of
sendmsg().
Signed-off-by: Demi Marie Obenour <demiobenour@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix a typo and a redundant phrase in the block comment above
__sys_accept4(): "thats" -> "that's", and drop the trailing
"to recvmsg" that repeats the recvmsg() reference earlier in
the same sentence.
No functional change.
Signed-off-by: Avinash Duduskar <avinash.duduskar@gmail.com>
Link: https://patch.msgid.link/20260516101109.479042-1-avinash.duduskar@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
|
|
Update do_sock_getsockopt() to use the new getsockopt_iter callback
when available. Add do_sock_getsockopt_iter() helper that:
1. Reads optlen from user/kernel space
2. Initializes a sockopt_t with the appropriate iov_iter (kvec for
kernel, ubuf for user buffers) and sets opt.optlen
3. Calls the protocol's getsockopt_iter callback
4. Writes opt.optlen back to user/kernel space
The optlen is always written back, even on failure. Some protocols
(e.g. CAN raw) return -ERANGE and set optlen to the required buffer
size so userspace knows how much to allocate.
The callback is responsible for setting opt.optlen to indicate the
returned data size.
Important to say that iov_out does not need to be copied back in
do_sock_getsockopt().
When optval is not kernel (the userspace path), sockptr_to_sockopt()
sets up opt->iter_out as a ITER_DEST ubuf iterator pointing directly at
the userspace buffer (optval.user). So when getsockopt_iter
implementations call copy_to_iter(..., &opt->iter_out), the data is
written directly to userspace — no intermediate kernel buffer is
involved.
When optval.is_kernel is true (the in-kernel path, e.g. from io_uring),
the kvec points at the already-provided kernel buffer (optval.kernel),
so the data lands in the caller's buffer directly via the kvec-backed
iterator.
In both cases the iterator writes to the final destination in-place at
protocol callback. There's nothing to copy back — only optlen needs to
be written back.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260408-getsockopt-v3-2-061bb9cb355d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs i_ino updates from Christian Brauner:
"For historical reasons, the inode->i_ino field is an unsigned long,
which means that it's 32 bits on 32 bit architectures. This has caused
a number of filesystems to implement hacks to hash a 64-bit identifier
into a 32-bit field, and deprives us of a universal identifier field
for an inode.
This changes the inode->i_ino field from an unsigned long to a u64.
This shouldn't make any material difference on 64-bit hosts, but
32-bit hosts will see struct inode grow by at least 4 bytes. This
could have effects on slabcache sizes and field alignment.
The bulk of the changes are to format strings and tracepoints, since
the kernel itself doesn't care that much about the i_ino field. The
first patch changes some vfs function arguments, so check that one out
carefully.
With this change, we may be able to shrink some inode structures. For
instance, struct nfs_inode has a fileid field that holds the 64-bit
inode number. With this set of changes, that field could be
eliminated. I'd rather leave that sort of cleanups for later just to
keep this simple"
* tag 'vfs-7.1-rc1.kino' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nilfs2: fix 64-bit division operations in nilfs_bmap_find_target_in_group()
EVM: add comment describing why ino field is still unsigned long
vfs: remove externs from fs.h on functions modified by i_ino widening
treewide: fix missed i_ino format specifier conversions
ext4: fix signed format specifier in ext4_load_inode trace event
treewide: change inode->i_ino from unsigned long to u64
nilfs2: widen trace event i_ino fields to u64
f2fs: widen trace event i_ino fields to u64
ext4: widen trace event i_ino fields to u64
zonefs: widen trace event i_ino fields to u64
hugetlbfs: widen trace event i_ino fields to u64
ext2: widen trace event i_ino fields to u64
cachefiles: widen trace event i_ino fields to u64
vfs: widen trace event i_ino fields to u64
net: change sock.sk_ino and sock_i_ino() to u64
audit: widen ino fields to u64
vfs: widen inode hash/lookup functions to u64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs xattr updates from Christian Brauner:
"This reworks the simple_xattr infrastructure and adds support for
user.* extended attributes on sockets.
The simple_xattr subsystem currently uses an rbtree protected by a
reader-writer spinlock. This series replaces the rbtree with an
rhashtable giving O(1) average-case lookup with RCU-based lockless
reads. This sped up concurrent access patterns on tmpfs quite a bit
and it's an overall easy enough conversion to do and gets rid or
rwlock_t.
The conversion is done incrementally: a new rhashtable path is added
alongside the existing rbtree, consumers are migrated one at a time
(shmem, kernfs, pidfs), and then the rbtree code is removed. All three
consumers switch from embedded structs to pointer-based lazy
allocation so the rhashtable overhead is only paid for inodes that
actually use xattrs.
With this infrastructure in place the series adds support for user.*
xattrs on sockets. Path-based AF_UNIX sockets inherit xattr support
from the underlying filesystem (e.g. tmpfs) but sockets in sockfs -
that is everything created via socket() including abstract namespace
AF_UNIX sockets - had no xattr support at all.
The xattr_permission() checks are reworked to allow user.* xattrs on
S_IFSOCK inodes. Sockfs sockets get per-inode limits of 128 xattrs and
128KB total value size matching the limits already in use for kernfs.
The practical motivation comes from several directions. systemd and
GNOME are expanding their use of Varlink as an IPC mechanism.
For D-Bus there are tools like dbus-monitor that can observe IPC
traffic across the system but this only works because D-Bus has a
central broker.
For Varlink there is no broker and there is currently no way to
identify which sockets speak Varlink. With user.* xattrs on sockets a
service can label its socket with the IPC protocol it speaks (e.g.,
user.varlink=1) and an eBPF program can then selectively capture
traffic on those sockets. Enumerating bound sockets via netlink
combined with these xattr labels gives a way to discover all Varlink
IPC entrypoints for debugging and introspection.
Similarly, systemd-journald wants to use xattrs on the /dev/log socket
for protocol negotiation to indicate whether RFC 5424 structured
syslog is supported or whether only the legacy RFC 3164 format should
be used.
In containers these labels are particularly useful as high-privilege
or more complicated solutions for socket identification aren't
available.
The series comes with comprehensive selftests covering path-based
AF_UNIX sockets, sockfs socket operations, per-inode limit
enforcement, and xattr operations across multiple address families
(AF_INET, AF_INET6, AF_NETLINK, AF_PACKET)"
* tag 'vfs-7.1-rc1.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/xattr: test xattrs on various socket families
selftests/xattr: sockfs socket xattr tests
selftests/xattr: path-based AF_UNIX socket xattr tests
xattr: support extended attributes on sockets
xattr,net: support limited amount of extended attributes on sockfs sockets
xattr: move user limits for xattrs to generic infra
xattr: switch xattr_permission() to switch statement
xattr: add xattr_permission_error()
xattr: remove rbtree-based simple_xattr infrastructure
pidfs: adapt to rhashtable-based simple_xattrs
kernfs: adapt to rhashtable-based simple_xattrs with lazy allocation
shmem: adapt to rhashtable-based simple_xattrs with lazy allocation
xattr: add rhashtable-based simple_xattr infrastructure
xattr: add rcu_head and rhash_head to struct simple_xattr
|
|
move_addr_to_user() is a critical functions that was converted to
masked user access by commit 1fb0e471611d ("net: remove one stac/clac
pair from move_addr_to_user()")
Convert it to scoped user access to simplify the code.
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/36d7f2e7f504d620c1b88526b25ebc89e3cb61d9.1773142315.git.chleroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On 32-bit architectures, unsigned long is only 32 bits wide, which
causes 64-bit inode numbers to be silently truncated. Several
filesystems (NFS, XFS, BTRFS, etc.) can generate inode numbers that
exceed 32 bits, and this truncation can lead to inode number collisions
and other subtle bugs on 32-bit systems.
Change the type of inode->i_ino from unsigned long to u64 to ensure that
inode numbers are always represented as 64-bit values regardless of
architecture. Update all format specifiers treewide from %lu/%lx to
%llu/%llx to match the new type, along with corresponding local variable
types.
This is the bulk treewide conversion. Earlier patches in this series
handled trace events separately to allow trace field reordering for
better struct packing on 32-bit.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260304-iino-u64-v3-12-2257ad83d372@kernel.org
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Instead of using struct timespec64 in scm_timestamping_internal,
use ktime_t, saving 24 bytes in kernel stack.
This makes tcp_update_recv_tstamps() small enough to be inlined.
The ktime_t -> timespec64 conversions happen after socket lock
has been released in tcp_recvmsg(), and only if the application
requested them.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux
add/remove: 0/2 grow/shrink: 5/4 up/down: 146/-277 (-131)
Function old new delta
tcp_zerocopy_receive 2383 2425 +42
mptcp_recvmsg 1565 1607 +42
tcp_recvmsg_locked 3797 3823 +26
put_cmsg_scm_timestamping64 131 149 +18
put_cmsg_scm_timestamping 131 149 +18
__pfx_tcp_update_recv_tstamps 16 - -16
do_tcp_getsockopt 4024 4006 -18
tcp_recv_timestamp 474 430 -44
tcp_zc_handle_leftover 417 371 -46
__sock_recv_timestamp 1087 1031 -56
tcp_update_recv_tstamps 97 - -97
Total: Before=25223788, After=25223657, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20260304012747.881644-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we've generalized the infrastructure for user.* xattrs make it
possible to set up to 128 user.* extended attributes on a sockfs inode
or up to 128kib. kernfs (cgroupfs) has the same limits and it has proven
to be quite sufficient for nearly all use-cases.
This will allow containers to label sockets and will e.g., be used by
systemd and Gnome to find various sockets in containers where
high-privilege or more complicated solutions aren't available.
Link: https://patch.msgid.link/20260216-work-xattr-socket-v1-10-c2efa4f74cb7@kernel.org
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared.
Link: https://lore.kernel.org/all/20260205145104.iWinkXHv@linutronix.de
Fixes: b245be1f4db1a ("net-timestamp: no-payload only sysctl")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260220183858.N4ERjFW6@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a type conversion bug in the ipc subsystem
- Fix per-dentry timeout warning in autofs
- Drop the fd conversion from sockets
- Move assert from iput_not_last() to iput()
- Fix reversed check in filesystems_freeze_callback()
- Use proper uapi types for new struct delegation definitions
* tag 'vfs-6.19-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: use UAPI types for new struct delegation definition
mqueue: correct the type of ro to int
Revert "net/socket: convert sock_map_fd() to FD_ADD()"
autofs: fix per-dentry timeout warning
fs: assert on I_FREEING not being set in iput() and iput_not_last()
fs: PM: Fix reverse check in filesystems_freeze_callback()
|
|
This reverts commit 245f0d1c622b0183ce4f44b3e39aeacf78fae594.
When allocating a file sock_alloc_file() consumes the socket reference
unconditionally which isn't correctly handled in the conversion. This
can be fixed by massaging this appropriately but this is best left for
next cycle.
Reported-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/CADvbK_ewub4ZZK-tZg8GBQbDFHWhd9a48C+AFXZ93pMsssCrUg@mail.gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Unify how task_work cancelations are detected, placing it in the
task_work running state rather than needing to check the task state
- Series cleaning up and moving the cancelation code to where it
belongs, in cancel.c
- Cleanup of waitid and futex argument handling
- Add support for mixed sized SQEs. 6.18 added support for mixed sized
CQEs, improving flexibility and efficiency of workloads that need big
CQEs. This adds similar support for SQEs, where the occasional need
for a 128b SQE doesn't necessitate having all SQEs be 128b in size
- Introduce zcrx and SQ/CQ layout queries. The former returns what zcrx
features are available. And both return the ring size information to
help with allocation size calculation for user provided rings like
IORING_SETUP_NO_MMAP and IORING_MEM_REGION_TYPE_USER
- Zcrx updates for 6.19. It includes a bunch of small patches,
IORING_REGISTER_ZCRX_CTRL and RQ flushing and David's work on sharing
zcrx b/w multiple io_uring instances
- Series cleaning up ring initializations, notable deduplicating ring
size and offset calculations. It also moves most of the checking
before doing any allocations, making the code simpler
- Add support for getsockname and getpeername, which is mostly a
trivial hookup after a bit of refactoring on the networking side
- Various fixes and cleanups
* tag 'for-6.19/io_uring-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (68 commits)
io_uring: Introduce getsockname io_uring cmd
socket: Split out a getsockname helper for io_uring
socket: Unify getsockname and getpeername implementation
io_uring/query: drop unused io_handle_query_entry() ctx arg
io_uring/kbuf: remove obsolete buf_nr_pages and update comments
io_uring/register: use correct location for io_rings_layout
io_uring/zcrx: share an ifq between rings
io_uring/zcrx: add io_fill_zcrx_offsets()
io_uring/zcrx: export zcrx via a file
io_uring/zcrx: move io_zcrx_scrub() and dependencies up
io_uring/zcrx: count zcrx users
io_uring/zcrx: add sync refill queue flushing
io_uring/zcrx: introduce IORING_REGISTER_ZCRX_CTRL
io_uring/zcrx: elide passing msg flags
io_uring/zcrx: use folio_nr_pages() instead of shift operation
io_uring/zcrx: convert to use netmem_desc
io_uring/query: introduce rings info query
io_uring/query: introduce zcrx query
io_uring: move cq/sq user offset init around
io_uring: pre-calculate scq layout
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
|
Link: https://patch.msgid.link/20251123-work-fd-prepare-v4-31-b6efa1706cfd@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Link: https://patch.msgid.link/20251123-work-fd-prepare-v4-30-b6efa1706cfd@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Similar to getsockopt, split out a helper to check security and issue
the operation from the main handler that can be used by io_uring.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
They are already implemented by the same get_name hook in the protocol
level. Bring the unification one level up to reduce code duplication
in preparation to supporting these as io_uring operations.
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Update all struct proto_ops connect() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-3-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update all struct proto_ops bind() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-2-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
|
|
Convert the get_user() and __put_user() code to the
fast masked_user_access_begin()/unsafe_{get|put}_user()
variant.
This patch increases the performance of an UDP recvfrom()
receiver (netserver) on 120 bytes messages by 7 %
on an AMD EPYC 7B12 64-Core Processor platform.
Presence of audit_sockaddr() makes difficult
to avoid the stac/clac pair in the copy_to_user() call,
this is left for a future patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250925230929.3727873-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For a user mode library to avoid generating SIGPIPE signals (e.g.
because this behaviour is not portable across operating systems) is
cumbersome. It is generally bad form to change the process-wide signal
mask in a library, so a local solution is needed instead.
For I/O performed directly using system calls (synchronous or readiness
based asynchronous) this currently involves applying a thread-specific
signal mask before the operation and reverting it afterwards. This can be
avoided when it is known that the file descriptor refers to neither a
pipe nor a socket, but a conservative implementation must always apply
the mask. This incurs the cost of two additional system calls. In the
case of sockets, the existing MSG_NOSIGNAL flag can be used with send.
For asynchronous I/O performed using io_uring, currently the only option
(apart from MSG_NOSIGNAL for sockets), is to mask SIGPIPE entirely in the
call to io_uring_enter. Thankfully io_uring_enter takes a signal mask, so
only a single syscall is needed. However, copying the signal mask on
every call incurs a non-zero performance penalty. Furthermore, this mask
applies to all completions, meaning that if the non-signaling behaviour
is desired only for some subset of operations, the desired signals must
be raised manually from user-mode depending on the completed operation.
Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE signal
from being raised when writing on disconnected pipes or sockets. The flag
is handled directly by the pipe filesystem and converted to the existing
MSG_NOSIGNAL flag for sockets.
Signed-off-by: Lauri Vasama <git@vasama.org>
Link: https://lore.kernel.org/20250827133901.1820771-1-git@vasama.org
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
sk->sk_uid can be read while another thread changes its
value in sockfs_setattr().
Add sk_uid(const struct sock *sk) helper to factorize the needed
READ_ONCE() annotations, and add corresponding WRITE_ONCE()
where needed.
Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://patch.msgid.link/20250620133001.4090592-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a helper function skb_get_tx_timestamp() that returns a tx timestamp
associated with an error queue skb.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/702357dd8936ef4c0d3864441e853bfe3224a677.1750065793.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge in late fixes to prepare for the 6.15 net-next PR.
No conflicts, adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
919f9f497dbc ("eth: bnxt: fix out-of-range access of vnic_info array")
fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add SOF_TIMESTAMPING_TX_COMPLETION, for requesting a software timestamp
when hardware reports a packet completed.
Completion tstamp is useful for Bluetooth, as hardware timestamps do not
exist in the HCI specification except for ISO packets, and the hardware
has a queue where packets may wait. In this case the software SND
timestamp only reflects the kernel-side part of the total latency
(usually small) and queue length (usually 0 unless HW buffers
congested), whereas the completion report time is more informative of
the true latency.
It may also be useful in other cases where HW TX timestamps cannot be
obtained and user wants to estimate an upper bound to when the TX
probably happened.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
SIOCBRDELIF is passed to dev_ioctl() first and later forwarded to
br_ioctl_call(), which causes unnecessary RTNL dance and the splat
below [0] under RTNL pressure.
Let's say Thread A is trying to detach a device from a bridge and
Thread B is trying to remove the bridge.
In dev_ioctl(), Thread A bumps the bridge device's refcnt by
netdev_hold() and releases RTNL because the following br_ioctl_call()
also re-acquires RTNL.
In the race window, Thread B could acquire RTNL and try to remove
the bridge device. Then, rtnl_unlock() by Thread B will release RTNL
and wait for netdev_put() by Thread A.
Thread A, however, must hold RTNL after the unlock in dev_ifsioc(),
which may take long under RTNL pressure, resulting in the splat by
Thread B.
Thread A (SIOCBRDELIF) Thread B (SIOCBRDELBR)
---------------------- ----------------------
sock_ioctl sock_ioctl
`- sock_do_ioctl `- br_ioctl_call
`- dev_ioctl `- br_ioctl_stub
|- rtnl_lock |
|- dev_ifsioc '
' |- dev = __dev_get_by_name(...)
|- netdev_hold(dev, ...) .
/ |- rtnl_unlock ------. |
| |- br_ioctl_call `---> |- rtnl_lock
Race | | `- br_ioctl_stub |- br_del_bridge
Window | | | |- dev = __dev_get_by_name(...)
| | | May take long | `- br_dev_delete(dev, ...)
| | | under RTNL pressure | `- unregister_netdevice_queue(dev, ...)
| | | | `- rtnl_unlock
\ | |- rtnl_lock <-' `- netdev_run_todo
| |- ... `- netdev_run_todo
| `- rtnl_unlock |- __rtnl_unlock
| |- netdev_wait_allrefs_any
|- netdev_put(dev, ...) <----------------'
Wait refcnt decrement
and log splat below
To avoid blocking SIOCBRDELBR unnecessarily, let's not call
dev_ioctl() for SIOCBRADDIF and SIOCBRDELIF.
In the dev_ioctl() path, we do the following:
1. Copy struct ifreq by get_user_ifreq in sock_do_ioctl()
2. Check CAP_NET_ADMIN in dev_ioctl()
3. Call dev_load() in dev_ioctl()
4. Fetch the master dev from ifr.ifr_name in dev_ifsioc()
3. can be done by request_module() in br_ioctl_call(), so we move
1., 2., and 4. to br_ioctl_stub().
Note that 2. is also checked later in add_del_if(), but it's better
performed before RTNL.
SIOCBRADDIF and SIOCBRDELIF have been processed in dev_ioctl() since
the pre-git era, and there seems to be no specific reason to process
them there.
[0]:
unregister_netdevice: waiting for wpan3 to become free. Usage count = 2
ref_tracker: wpan3@ffff8880662d8608 has 1/1 users at
__netdev_tracker_alloc include/linux/netdevice.h:4282 [inline]
netdev_hold include/linux/netdevice.h:4311 [inline]
dev_ifsioc+0xc6a/0x1160 net/core/dev_ioctl.c:624
dev_ioctl+0x255/0x10c0 net/core/dev_ioctl.c:826
sock_do_ioctl+0x1ca/0x260 net/socket.c:1213
sock_ioctl+0x23a/0x6c0 net/socket.c:1318
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x1a4/0x210 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcb/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 893b19587534 ("net: bridge: fix ioctl locking")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: yan kang <kangyan91@outlook.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/netdev/SY8P300MB0421225D54EB92762AE8F0F2A1D32@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250316192851.19781-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The linked series wants to add skb tx completion timestamps.
That needs a bit in skb_shared_info.tx_flags, but all are in use.
A per-skb bit is only needed for features that are configured on a
per packet basis. Per socket features can be read from sk->sk_tsflags.
Per packet tsflags can be set in sendmsg using cmsg, but only those in
SOF_TIMESTAMPING_TX_RECORD_MASK.
Per packet tsflags can also be set without cmsg by sandwiching a
send inbetween two setsockopts:
val |= SOF_TIMESTAMPING_$FEATURE;
setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val));
write(fd, buf, sz);
val &= ~SOF_TIMESTAMPING_$FEATURE;
setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val));
Changing a datapath test from skb_shinfo(skb)->tx_flags to
skb->sk->sk_tsflags can change behavior in that case, as the tx_flags
is written before the second setsockopt updates sk_tsflags.
Therefore, only bits can be reclaimed that cannot be set by cmsg and
are also highly unlikely to be used to target individual packets
otherwise.
Free up the bit currently used for SKBTX_HW_TSTAMP_USE_CYCLES. This
selects between clock and free running counter source for HW TX
timestamps. It is probable that all packets of the same socket will
always use the same source.
Link: https://lore.kernel.org/netdev/cover.1739988644.git.pav@iki.fi/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20250225023416.2088705-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support hw SCM_TSTAMP_SND case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_SND_HW_CB. This
callback will occur at the same timestamping point as the user
space's hardware SCM_TSTAMP_SND. The BPF program can use it to
get the same SCM_TSTAMP_SND timestamp without modifying the
user-space application.
To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP
with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers
from driver side using SKBTX_HW_TSTAMP. The new definition of
SKBTX_HW_TSTAMP means the combination tests of socket timestamping
and bpf timestamping. After this patch, drivers can work under the
bpf timestamping.
Considering some drivers don't assign the skb with hardware
timestamp, this patch does the assignment and then BPF program
can acquire the hwstamp from skb directly.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-9-kerneljasonxing@gmail.com
|
|
Most pseudo files are not applicable for fsnotify events at all,
let alone to the new pre-content events.
Disable notifications to all files allocated with alloc_file_pseudo()
and enable legacy inotify events for the specific cases of pipe and
socket, which have known users of inotify events.
Pre-content events are also kept disabled for sockets and pipes.
Fixes: 20bf82a898b6 ("mm: don't allow huge faults for files with pre content watches")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Closes: https://lore.kernel.org/linux-fsdevel/20250131121703.1e4d00a7.alex.williamson@redhat.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-fsdevel/CAHk-=wi2pThSVY=zhO=ZKxViBj5QCRX-=AS2+rVknQgJnHXDFg@mail.gmail.com/
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20250203223205.861346-3-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
