| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.15
1. Add support for Exynos USI v1 serial engines. Drivers already
supported newer IP blocks - USI v2 - present in Exynos850 and newer.
A bit older ARM64 designs, like Exynos8895 use older USI v1 block.
2. Add Exynos ACPM (Alive Clock and Power Manager) protocol driver
for Google GS101 SoC. ACPM protocol allows communication between the
power management firmware and other embedded processors.
3. Exynos2200: Add PMU, ChipID and SYSREG Devicetree bindings.
4. Exynos7870: Add PMU and ChipID Devicetree bindings.
5. Various cleanups.
* tag 'samsung-drivers-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
soc: samsung: include linux/array_size.h where needed
soc: samsung: exynos-chipid: add support for exynos7870
dt-bindings: soc: samsung: exynos-pmu: add exynos7870-pmu compatible
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos7870-chipid compatible
soc: samsung: exynos-chipid: add exynos2200 SoC support
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos2200 compatible
dt-bindings: soc: samsung: exynos-pmu: add exynos2200 compatible
dt-bindings: soc: samsung: exynos-sysreg: add sysreg compatibles for exynos2200
firmware: Exynos ACPM: Fix spelling mistake "Faile" -> "Failed"
MAINTAINERS: add entry for the Samsung Exynos ACPM mailbox protocol
firmware: add Exynos ACPM protocol driver
dt-bindings: firmware: add google,gs101-acpm-ipc
soc: samsung: usi: implement support for USIv1 and exynos8895
soc: samsung: usi: add a routine for unconfiguring the ip
dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi
soc: samsung: Use syscon_regmap_lookup_by_phandle_args
Link: https://lore.kernel.org/r/20250309185601.10616-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
firmware: tegra: Changes for v6.15-rc1
Not much to this except for a simple typofix.
* tag 'tegra-for-6.15-firmware' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: bpmp: Fix typo in bpmp-abi.h
Link: https://lore.kernel.org/r/20250307162332.3451523-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The word 'traget' is wrong, so fix it.
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118022928.11305-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A updates for v6.15
This update primarily focuses on FF-A framework notification support
along with other improvements, including UUID handling enhancements
and various fixes.
1. FF-A framework notification upport
- Adds support for multiple UUIDs per partition to register individual
SRI callbacks.
- Handles Rx buffer full framework notifications and provides a general
interface for future extensions.
2. Improved multiple UUID/services per-partition handling
- Adds support for UUID passing in FFA_MSG_SEND2, improving multiple
UUID/service support in the driver.
- Introduces a helper function to check whether a partition can
receive REQUEST2 messages.
3. Partition handling generic improvements
- Implements device unregistration for better partition cleanup.
- Improves handling of the host partition presence in partition info.
4. FF-A version updates
- Upgrades the driver version to FF-A v1.2.
- Rejects major versions higher than the driver version as incompatible.
5. Big-Endian support fixes
- Fixes big-endian issues in:
__ffa_partition_info_regs_get()
__ffa_partition_info_get()
- Big-endian support is still incomplete, and only these changes can
be verified without additional application/testing updates at the
moment. We can discover all the partitions correctly with big-endian
kernel now.
6. Miscellaneous fixes
- Fixes function prototype misalignments in: sync_send_receive{,2}
- Adds explicit type casting for return values from: FFA_VERSION
and NOTIFICATION_INFO_GET
- Corrects vCPU list parsing in ffa_notification_info_get().
7. UUID management in the driver and DMA mask updates
- Replaces UUID buffer with the standard UUID format in ffa_partition_info
structure.
- Fixes a typo in some FF-A bus macros.
- Sets dma_mask for FF-A devices.
In short, this update enhances notification handling, UUID support, and
overall robustness of the FF-A driver while addressing multiple fixes
and cleanups.
* tag 'ffa-updates-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (23 commits)
firmware: arm_ffa: Set dma_mask for ffa devices
firmware: arm_ffa: Skip the first/partition ID when parsing vCPU list
firmware: arm_ffa: Explicitly cast return value from NOTIFICATION_INFO_GET
firmware: arm_ffa: Explicitly cast return value from FFA_VERSION before comparison
firmware: arm_ffa: Handle ffa_notification_get correctly at virtual FF-A instance
firmware: arm_ffa: Allow multiple UUIDs per partition to register SRI callback
firmware: arm_ffa: Add support for handling framework notifications
firmware: arm_ffa: Add support for {un,}registration of framework notifications
firmware: arm_ffa: Stash ffa_device instead of notify_type in notifier_cb_info
firmware: arm_ffa: Refactoring to prepare for framework notification support
firmware: arm_ffa: Remove unnecessary declaration of ffa_partitions_cleanup()
firmware: arm_ffa: Reject higher major version as incompatible
firmware: arm_ffa: Upgrade FF-A version to v1.2 in the driver
firmware: arm_ffa: Add support for passing UUID in FFA_MSG_SEND2
firmware: arm_ffa: Helper to check if a partition can receive REQUEST2 messages
firmware: arm_ffa: Unregister the FF-A devices when cleaning up the partitions
firmware: arm_ffa: Handle the presence of host partition in the partition info
firmware: arm_ffa: Refactor addition of partition information into XArray
firmware: arm_ffa: Fix big-endian support in __ffa_partition_info_regs_get()
firmware: arm_ffa: Fix big-endian support in __ffa_partition_info_get()
...
Link: https://lore.kernel.org/r/20250304105928.432997-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SMCCC update for v6.15
Just a single update introducing the support for the optional SOC_ID
name string from the Arm SMCCC v1.6 specification.
If the SOC_ID name string is implemented, the machine field of the SoC
Device Attributes will reflect it.
The original intent of SOC_ID was to provide a JEP-106 code for the SiP
and the SoC revision to uniquely identify the SoC. However, there has
been a request to add this optional name so that SoC firmware can
directly provide the SoC name to the OS.
This change avoids the need for frequent updates to various tools that
would otherwise require maintaining hardcoded model/machine name tables
for new SoCs.
* tag 'smccc-update-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: smccc: Support optional Arm SMCCC SOC_ID name
Link: https://lore.kernel.org/r/20250304105845.432813-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
Apple SoC RTKit IPC library updates for 6.15:
- Additional logging for errors
- A few minor improvements and bugfixes required for drivers that are
yet to be upstreamed
* tag 'asahi-soc-rtkit-6.15' of https://github.com/AsahiLinux/linux:
soc: apple: rtkit: Cut syslog messages after the first '\0'
soc: apple: rtkit: Use high prio work queue
soc: apple: rtkit: Implement OSLog buffers properly
soc: apple: rtkit: Add and use PWR_STATE_INIT instead of _ON
soc: apple: rtkit: Fix use-after-free in apple_rtkit_crashlog_rx()
soc: apple: rtkit: Pass the crashlog to the crashed() callback
soc: apple: rtkit: Check & log more failures
Link: https://lore.kernel.org/r/20250302113842.58092-1-sven@svenpeter.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Issue Number 1.6 of the Arm SMC Calling Convention introduces an optional
SOC_ID name string. If implemented, point the 'machine' field of the SoC
Device Attributes at this string so that it will appear under
/sys/bus/soc/devices/soc0/machine.
On Arm SMC compliant SoCs, this will allow things like 'lscpu' to
eventually get a SoC provider model name from there rather than each
tool/utility needing to get a possibly inconsistent, obsolete, or incorrect
model/machine name from its own hardcoded model/machine name table.
Signed-off-by: Paul Benoit <paul@os.amperecomputing.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Message-Id: <20250219005932.3466-1-paul@os.amperecomputing.com>
(sudeep.holla: Dropped regsize variable and used 8 instead as Mark suggested)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Client drivers might want a copy of the crashlog to stash into a
devcoredump blob. Since device memory management can be very variable,
the actual devcoredump implementation is left to client drivers. Pass
the raw crashlog buffer to the client callback so it can use it if
desired.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20250202-rtkit-crashdump-v1-1-9d38615b4e12@asahilina.net
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
Framework notifications are doorbells that are rung by the partition
managers to signal common events to an endpoint. These doorbells cannot
be rung by an endpoint directly. A partition manager can signal a
Framework notification in response to an FF-A ABI invocation by an
endpoint.
Two additional notify_ops interface is being added for any FF-A device/
driver to register and unregister for such a framework notifications.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-16-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The basic and mandatory features of FF-A v1.2 are all supported now.
The driver supported version can be bumped from v1.1 to v1.2
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-11-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
FF-A v1.2 introduces UUID field in partition message header used in
FFA_MSG_SEND2 to enable partitions/endpoints exposing multiple UUIDs.
Add the support for passing UUID in FFA_MSG_SEND2.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-10-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add a helper that allows FF-A drivers to check if the partition can
receive the direct requests via the FFA_MSG_SEND_DIRECT_REQ2 ABI.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-9-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Both the FF-A core and the bus were in a single module before the
commit 18c250bd7ed0 ("firmware: arm_ffa: Split bus and driver into distinct modules").
The arm_ffa_bus_exit() takes care of unregistering all the FF-A devices.
Now that there are 2 distinct modules, if the core driver is unloaded and
reloaded, it will end up adding duplicate FF-A devices as the previously
registered devices weren't unregistered when we cleaned up the modules.
Fix the same by unregistering all the FF-A devices on the FF-A bus during
the cleaning up of the partitions and hence the cleanup of the module.
Fixes: 18c250bd7ed0 ("firmware: arm_ffa: Split bus and driver into distinct modules")
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-8-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Currently ffa_sync_send_receive2() takes UUID as a separate parameter
instead of using the one available in ffa_device structure.
Change the prototype of ffa_sync_send_receive2() to align with the
ffa_sync_send_receive() and use ffa_device->uuid.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-3-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Currently ffa_partition_info structure holds the UUID in the format
compatible with the firmware interface. However, most of the functions
in the FF-A core driver deals directly with uuid_t type.
Replace UUID buffer to standard UUID format in the ffa_partition_info
structure.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-2-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
|
|
Alive Clock and Power Manager (ACPM) Message Protocol is defined for
the purpose of communication between the ACPM firmware and masters
(AP, AOC, ...). ACPM firmware operates on the Active Power Management
(APM) module that handles overall power activities.
ACPM and masters regard each other as independent hardware component and
communicate with each other using mailbox messages and shared memory.
This protocol driver provides the interface for all the client drivers
making use of the features offered by the APM. Add ACPM protocol support.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20250213-gs101-acpm-v9-2-8b0281b93c8b@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Add bindings for QCom QCS8300 clocks, QCom SAR2130P qfprom, and
powertip,{st7272|hx8238a} displays
- Fix compatible for TI am62a7 dss
- Add a kunit test for __of_address_resource_bounds()
* tag 'devicetree-fixes-for-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: display: Add powertip,{st7272|hx8238a} as DT Schema description
dt-bindings: nvmem: qcom,qfprom: Add SAR2130P compatible
dt-bindings: display: ti: Fix compatible for am62a7 dss
of: address: Add kunit test for __of_address_resource_bounds()
dt-bindings: clock: qcom: Add QCS8300 video clock controller
dt-bindings: clock: qcom: Add CAMCC clocks for QCS8300
dt-bindings: clock: qcom: Add GPU clocks for QCS8300
|
|
KVM fixes for 6.14 part 1
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated
by KVM to fix a NULL pointer dereference.
- Enter guest mode (L2) from KVM's perspective before initializing the vCPU's
nested NPT MMU so that the MMU is properly tagged for L2, not L1.
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the
guest's value may be stale if a VM-Exit is handled in the fastpath.
|
|
KVM is dependent on the PSP SEV driver and PSP SEV driver needs to be
loaded before KVM module. In case of module loading any dependent
modules are automatically loaded but in case of built-in modules there
is no inherent mechanism available to specify dependencies between
modules and ensure that any dependent modules are loaded implicitly.
Add a new external API interface for PSP module initialization which
allows PSP SEV driver to be loaded explicitly if KVM is built-in.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-ID: <15279ca0cad56a07cf12834ec544310f85ff5edc.1739226950.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix a regression caused by an inadvertent change of the
THERMAL_GENL_ATTR_CPU_CAPABILITY value in one of the recent thermal
commits (Zhang Rui) and drop a stale piece of documentation (Daniel
Lezcano)"
* tag 'thermal-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/cpufreq_cooling: Remove structure member documentation
thermal/netlink: Prevent userspace segmentation fault by adjusting UAPI header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Take the newly introduced EFI_MEMORY_HOT_PLUGGABLE memory attribute
into account when placing the kernel image in memory at boot.
Otherwise, the presence of the kernel image could prevent such a
memory region from being unplugged at runtime if it was 'cold
plugged', i.e., already plugged in at boot time (and exposed via the
EFI memory map).
This should ensure that the new EFI_MEMORY_HOT_PLUGGABLE memory
attribute is used consistently by Linux before it ever turns up in
production, ensuring that we can make meaningful use of it without
running the risk of regressing existing users"
* tag 'efi-fixes-for-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Use BIT_ULL() constants for memory attributes
efi: Avoid cold plugged memory for placing the kernel
|
|
Pull block fixes from Jens Axboe:
- Fix for request rejection for batch addition
- Fix a few issues for bogus mac partition tables
* tag 'block-6.14-20250214' of git://git.kernel.dk/linux:
partitions: mac: fix handling of bogus partition table
block: cleanup and fix batch completion adding conditions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix a race window where a newly forked task could escape cgroup.kill
- Remove incorrectly included steal time from cpu.stat::usage_usec
- Minor update in selftest
* tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Remove steal time from usage_usec
selftests/cgroup: use bash in test_cpuset_v1_hp.sh
cgroup: fix race between fork and cgroup.kill
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes pull request, nothing too unusual, the hdmi tests
needs a bit of refactoring after lockdep shouted at them, otherwise
amdgpu and xe lead and a few misc otherwise.
amdgpu:
- Fix shutdown regression on old APUs
- Fix compute queue hang on gfx9 APUs
- Fix possible invalid access in PSP failure path
- Avoid possible buffer overflow in pptable override
amdkfd:
- Properly free gang bo in failure path
- GFX12 trap handler fix
i915:
- selftest fix: avoid using uninitialized context
xe:
- Remove bo->clients out of bos_lock area
- Carve out wopcm portion from the stolen memory
tests:
- fix lockdep with hdmi infrastructure tests
host1x:
- fix uninitialised mutex usage
panthor:
- fix uninit variable
hibmc:
- fix missing Kconfig select"
* tag 'drm-fixes-2025-02-14' of https://gitlab.freedesktop.org/drm/kernel:
drm: Fix DSC BPP increment decoding
drm/amdgpu: avoid buffer overflow attach in smu_sys_set_pp_table()
drm/amdkfd: Ensure consistent barrier state saved in gfx12 trap handler
drm/amdgpu: bail out when failed to load fw in psp_init_cap_microcode()
amdkfd: properly free gang_ctx_bo when failed to init user queue
drm/amdgpu: bump version for RV/PCO compute fix
drm/amdgpu/gfx9: manually control gfxoff for CS on RV
drm/amdgpu/pm: fix UVD handing in amdgpu_dpm_set_powergating_by_smu()
drm/xe: Carve out wopcm portion from the stolen memory
drm/i915/selftests: avoid using uninitialized context
drm/xe/client: bo->client does not need bos_lock
drm/hisilicon/hibmc: select CONFIG_DRM_DISPLAY_DP_HELPER
drm/panthor: avoid garbage value in panthor_ioctl_dev_query()
gpu: host1x: Fix a use of uninitialized mutex
drm/tests: hdmi: Fix recursive locking
drm/tests: hdmi: Reorder DRM entities variables assignment
drm/tests: hdmi: Remove redundant assignments
drm/tests: hdmi: Fix WW_MUTEX_SLOWPATH failures
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Some locking fixes for the HDMI infrastructure tests, an unitialized
mutex fix for host1x, an unitialized variable fix for panthor, and a
config selection fix for hibmc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213-brilliant-terrier-from-hell-d06dd5@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Kalle Valo steps down after serving as the WiFi driver maintainer for
over a decade.
Current release - fix to a fix:
- vsock: orphan socket after transport release, avoid null-deref
- Bluetooth: L2CAP: fix corrupted list in hci_chan_del
Current release - regressions:
- eth:
- stmmac: correct Rx buffer layout when SPH is enabled
- iavf: fix a locking bug in an error path
- rxrpc: fix alteration of headers whilst zerocopy pending
- s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
- Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
Current release - new code bugs:
- rxrpc: fix ipv6 path MTU discovery, only ipv4 worked
- pse-pd: fix deadlock in current limit functions
Previous releases - regressions:
- rtnetlink: fix netns refleak with rtnl_setlink()
- wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364
firmware
Previous releases - always broken:
- add missing RCU protection of struct net throughout the stack
- can: rockchip: bail out if skb cannot be allocated
- eth: ti: am65-cpsw: base XDP support fixes
Misc:
- ethtool: tsconfig: update the format of hwtstamp flags, changes the
uAPI but this uAPI was not in any release yet"
* tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
net: pse-pd: Fix deadlock in current limit functions
rxrpc: Fix ipv6 path MTU discovery
Reapply "net: skb: introduce and use a single page frag cache"
s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()
ipv6: mcast: add RCU protection to mld_newpack()
team: better TEAM_OPTION_TYPE_STRING validation
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP case
net: ethernet: ti: am65-cpsw: fix RX & TX statistics for XDP_TX case
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
vsock/test: Add test for SO_LINGER null ptr deref
vsock: Orphan socket after transport release
MAINTAINERS: Add sctp headers to the general netdev entry
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
iavf: Fix a locking bug in an error path
rxrpc: Fix alteration of headers whilst zerocopy pending
net: phylink: make configuring clock-stop dependent on MAC support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btintel_pcie: Fix a potential race condition
- L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
- L2CAP: Fix corrupted list in hci_chan_del
* tag 'for-net-2025-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
====================
Link: https://patch.msgid.link/20250213162446.617632-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 011b0335903832facca86cd8ed05d7d8d94c9c76.
Sabrina reports that the revert may trigger warnings due to intervening
changes, especially the ability to rise MAX_SKB_FRAGS. Let's drop it
and revisit once that part is also ironed out.
Fixes: 011b03359038 ("Revert "net: skb: introduce and use a single page frag cache"")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/6bf54579233038bc0e76056c5ea459872ce362ab.1739375933.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This fixes the following trace by reworking the locking of l2cap_conn
so instead of only locking when changing the chan_l list this promotes
chan_lock to a general lock of l2cap_conn so whenever it is being held
it would prevents the likes of l2cap_conn_del to run:
list_del corruption, ffff888021297e00->prev is LIST_POISON2 (dead000000000122)
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:61!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 5896 Comm: syz-executor213 Not tainted 6.14.0-rc1-next-20250204-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024
RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59
Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb
RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246
RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0
R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122
R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00
FS: 00007f7ace6686c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7aceeeb1d0 CR3: 000000003527c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__list_del_entry_valid include/linux/list.h:124 [inline]
__list_del_entry include/linux/list.h:215 [inline]
list_del_rcu include/linux/rculist.h:168 [inline]
hci_chan_del+0x70/0x1b0 net/bluetooth/hci_conn.c:2858
l2cap_conn_free net/bluetooth/l2cap_core.c:1816 [inline]
kref_put include/linux/kref.h:65 [inline]
l2cap_conn_put+0x70/0xe0 net/bluetooth/l2cap_core.c:1830
l2cap_sock_shutdown+0xa8a/0x1020 net/bluetooth/l2cap_sock.c:1377
l2cap_sock_release+0x79/0x1d0 net/bluetooth/l2cap_sock.c:1416
__sock_release net/socket.c:642 [inline]
sock_close+0xbc/0x240 net/socket.c:1393
__fput+0x3e9/0x9f0 fs/file_table.c:448
task_work_run+0x24f/0x310 kernel/task_work.c:227
ptrace_notify+0x2d2/0x380 kernel/signal.c:2522
ptrace_report_syscall include/linux/ptrace.h:415 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
syscall_exit_work+0xc7/0x1d0 kernel/entry/common.c:173
syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
syscall_exit_to_user_mode+0x24a/0x340 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7aceeaf449
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f7ace668218 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: fffffffffffffffc RBX: 00007f7acef39328 RCX: 00007f7aceeaf449
RDX: 000000000000000e RSI: 0000000020000100 RDI: 0000000000000004
RBP: 00007f7acef39320 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 0000000000000004 R14: 00007f7ace668670 R15: 000000000000000b
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59
Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb
RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246
RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0
R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122
R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00
FS: 00007f7ace6686c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7acef05b08 CR3: 000000003527c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Reported-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com
Tested-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com
Fixes: b4f82f9ed43a ("Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
|
|
Many drivers abuse the platform driver/bus system as it provides a
simple way to create and bind a device to a driver-specific set of
probe/release functions. Instead of doing that, and wasting all of the
memory associated with a platform device, here is a "faux" bus that
can be used instead.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/2025021026-atlantic-gibberish-3f0c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The conditions for whether or not a request is allowed adding to a
completion batch are a bit hard to read, and they also have a few
issues. One is that ioerror may indeed be a random value on passthrough,
and it's being checked unconditionally of whether or not the given
request is a passthrough request or not.
Rewrite the conditions to be separate for easier reading, and only check
ioerror for non-passthrough requests. This fixes an issue with bio
unmapping on passthrough, where it fails getting added to a batch. This
both leads to suboptimal performance, and may trigger a potential
schedule-under-atomic condition for polled passthrough IO.
Fixes: f794f3351f26 ("block: add support for blk_mq_end_request_batch()")
Link: https://lore.kernel.org/r/20575f0a-656e-4bb3-9d82-dec6c7e3a35c@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Starting with DPCD version 2.0 bits 6:3 of the DP_DSC_BITS_PER_PIXEL_INC
DPCD register contains the NativeYCbCr422_MAX_bpp_DELTA field, which can
be non-zero as opposed to earlier DPCD versions, hence decoding the
bit_per_pixel increment value at bits 2:0 in the same register requires
applying a mask, do so.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Fixes: 0c2287c96521 ("drm/display/dp: Add helper function to get DSC bpp precision")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212161851.4007005-1-imre.deak@intel.com
|
|
The intel-lpmd tool [1], which uses the THERMAL_GENL_ATTR_CPU_CAPABILITY
attribute to receive HFI events from kernel space, encounters a
segmentation fault after commit 1773572863c4 ("thermal: netlink: Add the
commands and the events for the thresholds").
The issue arises because the THERMAL_GENL_ATTR_CPU_CAPABILITY raw value
was changed while intel_lpmd still uses the old value.
Although intel_lpmd can be updated to check the THERMAL_GENL_VERSION and
use the appropriate THERMAL_GENL_ATTR_CPU_CAPABILITY value, the commit
itself is questionable.
The commit introduced a new element in the middle of enum thermal_genl_attr,
which affects many existing attributes and introduces potential risks
and unnecessary maintenance burdens for userspace thermal netlink event
users.
Solve the issue by moving the newly introduced
THERMAL_GENL_ATTR_TZ_PREV_TEMP attribute to the end of the
enum thermal_genl_attr. This ensures that all existing thermal generic
netlink attributes remain unaffected.
Link: https://github.com/intel/intel-lpmd [1]
Fixes: 1773572863c4 ("thermal: netlink: Add the commands and the events for the thresholds")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20250208074907.5679-1-rui.zhang@intel.com
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
l3mdev_l3_out() can be called without RCU being held:
raw_sendmsg()
ip_push_pending_frames()
ip_send_skb()
ip_local_out()
__ip_local_out()
l3mdev_ip_out()
Add rcu_read_lock() / rcu_read_unlock() pair to avoid
a potential UAF.
Fixes: a8e3e1a9f020 ("net: l3mdev: Add hook to output path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Suppress false-positive -Wformat-{overflow,truncation}-non-kprintf
warnings regardless of the W= option
- Avoid CONFIG_TRIM_UNUSED_KSYMS dropping symbols passed to symbol_get()
- Fix a build regression of the Debian linux-headers package
* tag 'kbuild-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: add missing quotation marks for CC variable
kbuild: fix misspelling in scripts/Makefile.lib
kbuild: keep symbols for symbol_get() even with CONFIG_TRIM_UNUSED_KSYMS
scripts/Makefile.extrawarn: Do not show clang's non-kprintf warnings at W=1
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after the
rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully
emulated guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
- move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code.
As an initial set of cleanups, move some code from mm/gmap into kvm
and start using __kvm_faultin_pfn() to fault-in pages as needed;
but especially stop abusing page->index and page->lru to aid in the
pgdesc conversion.
x86:
- Add missing check in the fix to defer starting the huge page
recovery vhost_task
- SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: x86/mmu: Ensure NX huge page recovery thread is alive before waking
KVM: remove kvm_arch_post_init_vm
KVM: selftests: Fix spelling mistake "initally" -> "initially"
kvm: x86: SRSO_USER_KERNEL_NO is not synthesized
KVM: arm64: timer: Don't adjust the EL2 virtual timer offset
KVM: arm64: timer: Correctly handle EL1 timer emulation when !FEAT_ECV
KVM: arm64: timer: Always evaluate the need for a soft timer
KVM: arm64: Fix nested S2 MMU structures reallocation
KVM: arm64: Fail protected mode init if no vgic hardware is present
KVM: arm64: Flush/sync debug state in protected mode
KVM: s390: selftests: Streamline uc_skey test to issue iske after sske
KVM: s390: remove the last user of page->index
KVM: s390: move PGSTE softbits
KVM: s390: remove useless page->index usage
KVM: s390: move gmap_shadow_pgt_lookup() into kvm
KVM: s390: stop using lists to keep track of used dat tables
KVM: s390: stop using page->index for non-shadow gmaps
KVM: s390: move some gmap shadowing functions away from mm/gmap.c
KVM: s390: get rid of gmap_translate()
KVM: s390: get rid of gmap_fault()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
"Address a KUnit stack initialization regression that got tickled on
m68k, and solve a Clang(v14 and earlier) bug found by 0day:
- Fix stackinit KUnit regression on m68k
- Use ARRAY_SIZE() for memtostr*()/strtomem*()"
* tag 'hardening-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
string.h: Use ARRAY_SIZE() for memtostr*()/strtomem*()
compiler.h: Introduce __must_be_byte_array()
compiler.h: Move C string helpers into C-only kernel section
stackinit: Fix comment for test_small_end
stackinit: Keep selftest union size small on m68k
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A number of fairly small fixes, mostly in drivers but two in the core
to change a retry for depopulation (a trendy new hdd thing that
reorganizes blocks away from failing elements) and one to fix a GFP_
annotation to avoid a lock dependency (the third core patch is all in
testing)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla1280: Fix kernel oops when debug level > 2
scsi: ufs: core: Fix error return with query response
scsi: storvsc: Set correct data length for sending SCSI command without payload
scsi: ufs: core: Fix use-after free in init error and remove paths
scsi: core: Do not retry I/Os during depopulation
scsi: core: Use GFP_NOIO to avoid circular locking dependency
scsi: ufs: Fix toggling of clk_gating.state when clock gating is not allowed
scsi: ufs: core: Ensure clk_gating.lock is used only after initialization
scsi: ufs: core: Simplify temperature exception event handling
scsi: target: core: Add line break to status show
scsi: ufs: core: Fix the HIGH/LOW_TEMP Bit Definitions
scsi: core: Add passthrough tests for success and no failure definitions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c reverts from Wolfram Sang:
"It turned out the new mechanism for handling created devices does not
handle all muxing cases.
Revert the changes to give a proper solution more time"
* tag 'i2c-for-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: Replace list-based mechanism for handling auto-detected clients"
Revert "i2c: Replace list-based mechanism for handling userspace-created clients"
|
|
This reverts commit dbae2b062824 ("net: skb: introduce and use a single
page frag cache"). The intended goal of such change was to counter a
performance regression introduced by commit 3226b158e67c ("net: avoid
32 x truesize under-estimation for tiny skbs").
Unfortunately, the blamed commit introduces another regression for the
virtio_net driver. Such a driver calls napi_alloc_skb() with a tiny
size, so that the whole head frag could fit a 512-byte block.
The single page frag cache uses a 1K fragment for such allocation, and
the additional overhead, under small UDP packets flood, makes the page
allocator a bottleneck.
Thanks to commit bf9f1baa279f ("net: add dedicated kmem_cache for
typical/small skb->head"), this revert does not re-introduce the
original regression. Actually, in the relevant test on top of this
revert, I measure a small but noticeable positive delta, just above
noise level.
The revert itself required some additional mangling due to the
introduction of the SKB_HEAD_ALIGN() helper and local lock infra in the
affected code.
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: dbae2b062824 ("net: skb: introduce and use a single page frag cache")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/e649212fde9f0fdee23909ca0d14158d32bb7425.1738877290.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Just regular drm fixes, amdgpu, xe and i915 mostly, but a few
scattered fixes. I think one of the i915 fixes fixes some build combos
that Guenter was seeing.
amdgpu:
- Add new tiling flag for DCC write compress disable
- Add BO metadata flag for DCC
- Fix potential out of bounds access in display
- Seamless boot fix
- CONFIG_FRAME_WARN fix
- PSR1 fix
xe:
- OA uAPI related fixes
- Fix SRIOV migration initialization
- Restore devcoredump to a sane state
i915:
- Fix the build error with clamp after WARN_ON on gcc 13.x+
- HDCP related fixes
- PMU fix zero delta busyness issue
- Fix page cleanup on DMA remap failure
- Drop 64bpp YUV formats from ICL+ SDR planes
- GuC log related fix
- DisplayPort related fixes
ivpu:
- Fix error handling
komeda:
- add return check
zynqmp:
- fix locking in DP code
ast:
- fix AST DP timeout
cec:
- fix broken CEC adapter check"
* tag 'drm-fixes-2025-02-08' of https://gitlab.freedesktop.org/drm/kernel: (29 commits)
drm/i915/dp: Fix potential infinite loop in 128b/132b SST
Revert "drm/amd/display: Use HW lock mgr for PSR1"
drm/amd/display: Respect user's CONFIG_FRAME_WARN more for dml files
accel/amdxdna: Add MODULE_FIRMWARE() declarations
drm/i915/dp: Iterate DSC BPP from high to low on all platforms
drm/xe: Fix and re-enable xe_print_blob_ascii85()
drm/xe/devcoredump: Move exec queue snapshot to Contexts section
drm/xe/oa: Set stream->pollin in xe_oa_buffer_check_unlocked
drm/xe/pf: Fix migration initialization
drm/xe/oa: Preserve oa_ctrl unused bits
drm/amd/display: Fix seamless boot sequence
drm/amd/display: Fix out-of-bound accesses
drm/amdgpu: add a BO metadata flag to disable write compression for Vulkan
drm/i915/backlight: Return immediately when scale() finds invalid parameters
drm/i915/dp: Return min bpc supported by source instead of 0
drm/i915/dp: fix the Adaptive sync Operation mode for SDP
drm/i915/guc: Debug print LRC state entries only if the context is pinned
drm/i915: Drop 64bpp YUV formats from ICL+ SDR planes
drm/i915: Fix page cleanup on DMA remap failure
drm/i915/pmu: Fix zero delta busyness issue
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix fsnotify FMODE_NONOTIFY* handling.
This also disables fsnotify on all pseudo files by default apart from
very select exceptions. This carries a regression risk so we need to
watch out and adapt accordingly. However, it is overall a significant
improvement over the current status quo where every rando file can
get fsnotify enabled.
- Cleanup and simplify lockref_init() after recent lockref changes.
- Fix vboxfs build with gcc-15.
- Add an assert into inode_set_cached_link() to catch corrupt links.
- Allow users to also use an empty string check to detect whether a
given mount option string was empty or not.
- Fix how security options were appended to statmount()'s ->mnt_opt
field.
- Fix statmount() selftests to always check the returned mask.
- Fix uninitialized value in vfs_statx_path().
- Fix pidfs_ioctl() sanity checks to guard against ioctl() overloading
and preserve extensibility.
* tag 'vfs-6.14-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: sanity check the length passed to inode_set_cached_link()
pidfs: improve ioctl handling
fsnotify: disable pre-content and permission events by default
selftests: always check mask returned by statmount(2)
fsnotify: disable notification by default for all pseudo files
fs: fix adding security options to statmount.mnt_opt
fsnotify: use accessor to set FMODE_NONOTIFY_*
lockref: remove count argument of lockref_init
gfs2: switch to lockref_init(..., 1)
gfs2: use lockref_init for gl_lockref
statmount: let unset strings be empty
vboxsf: fix building with GCC 15
fs/stat.c: avoid harmless garbage value problem in vfs_statx_path()
|
|
This costs a strlen() call when instatianating a symlink.
Preferably it would be hidden behind VFS_WARN_ON (or compatible), but
there is no such facility at the moment. With the facility in place the
call can be patched out in production kernels.
In the meantime, since the cost is being paid unconditionally, use the
result to a fixup the bad caller.
This is not expected to persist in the long run (tm).
Sample splat:
bad length passed for symlink [/tmp/syz-imagegen43743633/file0/file0] (got 131109, expected 37)
[rest of WARN blurp goes here]
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250204213207.337980-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The FMODE_NONOTIFY_* bits are a 2-bits mode. Open coding manipulation
of those bits is risky. Use an accessor file_set_fsnotify_mode() to
set the mode.
Rename file_set_fsnotify_mode() => file_set_fsnotify_mode_from_watchers()
to make way for the simple accessor name.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20250203223205.861346-2-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All users of lockref_init() now initialize the count to 1, so hardcode
that and remove the count argument.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Link: https://lore.kernel.org/r/20250130135624.1899988-4-agruenba@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A couple of fixes for ivpu to error handling, komeda for format
handling, AST DP timeout fix when enabling the output, locking fix for
zynqmp DP support, tiled format handling in drm/client, and refcounting
fix for bochs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206-encouraging-judicious-quoll-adc1dc@houat
|
|
The destination argument of memtostr*() and strtomem*() must be a
fixed-size char array at compile time, so there is no need to use
__builtin_object_size() (which is useful for when an argument is
either a pointer or unknown). Instead use ARRAY_SIZE(), which has the
benefit of working around a bug in Clang (fixed[1] in 15+) that got
__builtin_object_size() wrong sometimes.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501310832.kiAeOt2z-lkp@intel.com/
Suggested-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://github.com/llvm/llvm-project/commit/d8e0a6d5e9dd2311641f9a8a5d2bf90829951ddc [1]
Tested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
In preparation for adding stricter type checking to the str/mem*()
helpers, provide a way to check that a variable is a byte array
via __must_be_byte_array().
Suggested-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Kees Cook <kees@kernel.org>
|
