| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for for v6.11
There are a lot of changes in here, though the big bulk of things is
cleanups and simplifications of various kinds which are internally
rather than externally visible. A good chunk of those are DT schema
conversions, but there's also a lot of changes in the code.
Highlights:
- Syncing of features between simple-audio-card and the two
audio-graph cards so there is no reason to stick with an older
driver.
- Support for specifying the order of operations for components within
cards to allow quirking for unusual systems.
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments PCM5242.
|
|
Requriment from customer to add new kcontrol to set tas2563 digital
Volume
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240710064238.1480-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Commit series that makes some small improvements to code and the
kernel log messages.
|
|
Rename the confusingly named struct member fw_ver to wmfw_ver. It
contains the wmfw format version of the loaded wmfw file.
This commit also contains an update to wm_adsp for the new name.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The wmfw_filename and bin_filename strings passed into cs_dsp_power_up()
and cs_dsp_adsp1_power_up() should be const char *.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename the tas2781_reset as tasdevice_reset in case of misunderstanding.
RESET register for both tas2563 and tas2781 is same and the use of reset
pin is also same.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240709043342.946-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
MIDI2 Set Tempo message defines the tempo in 10ns unit for finer
accuracy, while MIDI1 was defined in 1us unit. For adapting this
different unit, introduce "tempo_base" field to snd_seq_queue_tempo
struct so that user-space can pass the proper tempo base unit.
The accepted value is limited, it must be either 0, 10 or 1000.
The protocol version is bumped to 1.0.4 along with this.
The access with the older protocol version ignores the tempo-base
value in ioctls and always treats as 1000.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20240705160344.6481-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Herve Codina <herve.codina@bootlin.com>:
The qmc_audio driver supports only audio in interleaved mode.
Non-interleaved mode can be easily supported using several QMC channel
per DAI. In that case, data related to ch0 are sent to (received from)
the first QMC channel, data related to ch1 use the next QMC channel and
so on up to the last channel.
In terms of constraints and settings, the interleaved and
non-interleaved modes are slightly different.
In interleaved mode:
- The sample size should fit in the number of time-slots available for
the QMC channel.
- The number of audio channels should fit in the number of time-slots
(taking into account the sample size) available for the QMC channel.
In non-interleaved mode:
- The number of audio channels is the number of available QMC
channels.
- Each QMC channel should have the same number of time-slots.
- The sample size equals the number of time-slots of one QMC channel.
This series add support for the non-interleaved mode in the qmc_audio
driver and is composed of the following parts:
- Patches 1 and 2: Fix some issues in the qmc_audio
- Patches 3 to 6: Prepare qmc_audio for the non-interleaved mode
- Patches 7 and 8: Extend the QMC driver API
- Patches 9 and 10: The support for non-interleaved mode itself
Compared to the previous iteration, this v2 series mainly improves
qmc_audio_access_is_interleaved().
|
|
No function in the QMC API is available to get the number of phandles
present in a phandle list.
Fill this lack introducing qmc_chan_count_phandles().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20240701113038.55144-9-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
qmc_chan_get_byphandle() and the resource managed version retrieve a
channel from a simple phandle.
Extend the API and introduce qmc_chan_get_byphandles_index() and the
resource managed version in order to retrieve a channel from a phandle
list using the provided index to identify the phandle in the list.
Also update qmc_chan_get_byphandle() and the resource managed version to
use qmc_chan_get_byphandles_index() and so avoid code duplication.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20240701113038.55144-8-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Number of widgets in array passed to snd_soc_dapm_new_controls() cannot
be negative, so make it explicit by using 'unsigned int', just like
snd_soc_add_component_controls() is doing.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240701-b4-qcom-audio-lpass-codec-cleanups-v3-4-6d98d4dd1ef5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change CS35L56_MAIN_RENDER_USER_VOLUME_MAX to 48, to limit the maximum
value of the Speaker Volume control to +12dB. The minimum value is
unchanged so that the default 0dB has the same integer control value.
The original maximum of 400 (+100dB) was the largest value that can be
mathematically handled by the DSP. The actual maximum amplification is
+12dB.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240703095517.208077-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Optimize the memory usage in struct snd_pcm_runtime - use boolean
value for the standard sync ID scheme.
Introduce snd_pcm_set_sync_per_card function to build synchronization
IDs.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240625172836.589380-3-perex@perex.cz
|
|
Until the commit e11f0f90a626 ("ALSA: pcm: remove SNDRV_PCM_IOCTL1_INFO
internal command"), there was a possibility to pass information
about the synchronized streams to the user space. The mentioned
commit removed blindly the appropriate code with an irrelevant comment.
The revert may be appropriate, but since this API was lost for several
years without any complains, it's time to improve it. The hardware
parameters may change the used stream clock source (e.g. USB hardware)
so move this synchronization ID to hw_params as read-only field.
It seems that pipewire can benefit from this API (disable adaptive
resampling for perfectly synchronized PCM streams) now.
Note that the contents of ID is not supposed to be used for direct
comparison with a specific byte sequence. The "empty" case is when
all bytes are zero (driver does not offer this information)
and all other cases must be only used for equal comparison among
PCM streams (including different sound cards) if they are using
identical hardware clock.
Cc: Takashi Sakamoto <takaswie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240625172836.589380-2-perex@perex.cz
|
|
No product was ever released with A1 silicon so there is no
need for the driver to include support for it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240701104444.172556-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch reverts a series of commits that allowed for the ASP
registers to be owned by either the driver or the firmware. Nothing
currently depends on the functionality that is being reverted, so
it is safe to remove.
The commits being reverted are (last 3 are bugfixes to the first 2):
commit 72a77d7631c6
("ASoC: cs35l56: Fix to ensure ASP1 registers match cache")
commit 07f7d6e7a124
("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
commit 4703b014f28b
("ASoC: cs35l56: fix reversed if statement in cs35l56_dspwait_asp1tx_put()")
commit c14f09f010cc
("ASoC: cs35l56: Fix deadlock in ASP1 mixer register initialization")
commit dfd2ffb37399
("ASoC: cs35l56: Prevent overwriting firmware ASP config")
These reverts have been squashed into a single commit because there
would be no reason to revert only some of them (which would just
reintroduce bugs).
The changes introduced by the commits were well-intentioned but
somewhat misguided. ACPI does not provide any information about how
audio hardware is linked together, so that information has to be
hardcoded into drivers. On Windows the firmware is customized to
statically setup appropriate configuration of the audio links,
and the intent of the commits was to re-use this information if the
Linux host drivers aren't taking control of the ASP. This would
avoid having to hardcode the ASP config into the machine driver on
some systems.
However, this added complexity and race conditions into the driver.
It also complicates implementation of new code.
The only case where the ASP is used but the host is not taking
ownership is when CS35L56 is used in SoundWire mode with the ASP
as a reference audio interconnect. But even in that case it's not
necessarily required even if the firmware initialized it. Typically
it is used to avoid the host SDCA drivers having to be capable of
aggregating capture paths from multiple SoundWire peripherals. But
the SOF SoundWire support is capable of doing that aggregation.
Reverting all these commits significantly simplifies the driver.
Let's just use the normal Linux mechanisms of the machine driver and
ALSA controls to set things up instead of trying to use the firmware
to do use-case setup.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240701104444.172556-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Simple Audio
Card / Audio Graph Card still not support it. Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87r0d2zojq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sound Card need to consider/adjust HW control ordering based on the
combination of CPU/Codec. The controlling feature is already supported
on ASoC, but Simple Audio Card / Audio Graph Card still not support it.
Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87sexizojx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
to support corresponding TAS2563/TAS2781s
Add name_prefix as the prefix name of firmwares and
kcontrol to support corresponding TAS2563/TAS2781s.
name_prefix is not mandatory.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240621132309.564-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Make few pointers in ASoC functions as pointers to const, so the code is
clearer to read, a bit safer and allows further constifications (e.g.
placing some data as rodata).
|
|
We need some of the AMD fixes as a base for new work.
|
|
This is the initial i2s-based amplifier driver for rt1318.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://msgid.link/r/b3055442ce6d4994aa01aa1fad6ba1fe@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In only loading RCA (Reconfigurable Architecture) binary case, no DSP
program will be working inside tas2563/tas2781, that is dsp-bypass mode,
do not support speaker protection, or audio acoustic algorithms in this
mode.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240614133646.910-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Returned 'struct snd_soc_pcm_stream' by snd_soc_dai_get_pcm_stream() is
not modified by the users, so it can be changed as pointer to const.
This is a necessary step towards making the 'dai->driver' a pointer to
const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-5-8004f346ee38@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
get_channel_map() is supposed to obtain map of channels without
modifying the state of the given DAI, so make the pointer to 'struct
snd_soc_dai' as pointing to const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-4-8004f346ee38@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Several ASoC functions receive pointers to data which is not modified,
e.g. pointers to 'snd_soc_dai', 'snd_soc_pcm_runtime',
'snd_pcm_hw_params' and 'snd_soc_dai_link'.
All these pointers can be made as a pointer to const. This makes code
safer, serves as clear annotation of function's intentions (no ownership
passed to the function, no modifications) and allows putting pointed
structures in rodata (if ever applicable).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-3-8004f346ee38@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC core code does not modify contents of 'of_phandle_args' in 'struct
snd_soc_dai_link_component', so the pointer can be made as a pointer to
const. This makes code safer, serves as clear annotation of core's
intentions and allows putting pointed structures in rodata (if ever
applicable).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-2-8004f346ee38@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC core code does not modify contents of 'of_phandle_args' in 'struct
snd_soc_dai_driver', so the pointer can be made as a pointer to const.
This makes code safer, serves as clear annotation of core's intentions
and allows putting pointed structures in rodata (if ever applicable).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-1-8004f346ee38@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The core ASoC code does not modify contents of the
'auto_selectable_formats' array passed in 'struct snd_soc_dai_ops', so
make it const for code safety.
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240617125735.582963-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'struct mtk_adsp_ipc_ops' is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
In order to do it, "struct mtk_adsp_ipc" also needs to be adjusted to this
new const qualifier.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
15533 2383 0 17916 45fc sound/soc/sof/mediatek/mt8195/mt8195.o
After:
=====
text data bss dec hex filename
15557 2367 0 17924 4604 sound/soc/sof/mediatek/mt8195/mt8195.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/a45d6b2b5ec040ea0fc78fca662c2dca3f13a49f.1718312321.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
This patchset adds support to reading codec version and also adds
support for v2.5 codec version in rx macro.
LPASS 2.5 and up versions have changes in some of the rx blocks which
are required to get headset functional correctly.
Tested this on SM8450, X13s and x1e80100 crd.
This changes also fixes issue with sm8450, sm8550, sm8660 and x1e80100.
|
|
More PCI ids for Intel audio.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240612064709.51141-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Sometimes the stream may be stopped due to XRUN events, in which case
the userspace can call snd_pcm_drop() and snd_pcm_prepare() to stop and
start the stream again.
In these cases, we must wait for the DMA channel to synchronize before
marking the stream as prepared for playback, as the DMA channel gets
stopped by drop() without any synchronization. Make sure the ALSA core
synchronizes the DMA channel by adding a sync_stop() hook.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-1-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ACPI _ADR is a 64-bit value. We changed the definitions in commit
ca6f998cf9a2 ("ACPI: bus: change _ADR representation to 64 bits") but
some helpers still assume the value is a 32-bit value.
This patch adds a new helper to extract the full 64-bits. The existing
32-bit helper is kept for backwards-compatibility and cases where the
_ADR is known to fit in a 32-bit value.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240528192936.16180-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix potential read out of bounds in hid-asus (Andrew Ballance)
- fix endian-conversion on little endian systems in intel-ish-hid (Arnd
Bergmann)
- A couple of new input event codes (Aseda Aboagye)
- errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
(Christophe JAILLET), hid-logitech-dj (José Expósito)
- current leakage fix while the device is in suspend on a i2c-hid
laptop (Johan Hovold)
- other assorted smaller fixes and device ID / quirk entry additions
* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: Ignore battery for ELAN touchscreens 2F2C and 4116
HID: i2c-hid: elan: fix reset suspend current leakage
dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
input: Add support for "Do Not Disturb"
input: Add event code for accessibility key
hid: asus: asus_report_fixup: fix potential read out of bounds
HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
HID: intel-ish-hid: fix endian-conversion
HID: nintendo: Fix an error handling path in nintendo_hid_probe()
HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
HID: core: remove unnecessary WARN_ON() in implement()
HID: nvidia-shield: Add missing check for input_ff_create_memless
HID: intel-ish-hid: Fix build error for COMPILE_TEST
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking doc fix from Ingo Molnar:
"Fix typos in the kerneldoc of some of the atomic APIs"
* tag 'locking-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: scripts: fix ${atomic}_sub_and_test() kerneldoc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"14 hotfixes, 6 of which are cc:stable.
All except the nilfs2 fix affect MM and all are singletons - see the
chagelogs for details"
* tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
mm: fix xyz_noprof functions calling profiled functions
codetag: avoid race at alloc_slab_obj_exts
mm/hugetlb: do not call vma_add_reservation upon ENOMEM
mm/ksm: fix ksm_zero_pages accounting
mm/ksm: fix ksm_pages_scanned accounting
kmsan: do not wipe out origin when doing partial unpoisoning
vmalloc: check CONFIG_EXECMEM in is_vmalloc_or_module_addr()
mm: page_alloc: fix highatomic typing in multi-block buddies
nilfs2: fix potential kernel bug due to lack of writeback flag waiting
memcg: remove the lockdep assert from __mod_objcg_mlstate()
mm: arm64: fix the out-of-bounds issue in contpte_clear_young_dirty_ptes
mm: huge_mm: fix undefined reference to `mthp_stats' for CONFIG_SYSFS=n
mm: drop the 'anon_' prefix for swap-out mTHP counters
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"Core:
- Make iommu-dma code recognize 'force_aperture' again
- Fix for potential NULL-ptr dereference from iommu_sva_bind_device()
return value
AMD IOMMU fixes:
- Fix lockdep splat for invalid wait context
- Add feature bit check before enabling PPR
- Make workqueue name fit into buffer
- Fix memory leak in sysfs code"
* tag 'iommu-fixes-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix Invalid wait context issue
iommu/amd: Check EFR[EPHSup] bit before enabling PPR
iommu/amd: Fix workqueue name
iommu: Return right value in iommu_sva_bind_device()
iommu/dma: Fix domain init
iommu/amd: Fix sysfs leak in iommu init
|
|
HUTRR94 added support for a new usage titled "System Do Not Disturb"
which toggles a system-wide Do Not Disturb setting. This commit simply
adds a new event code for the usage.
Signed-off-by: Aseda Aboagye <aaboagye@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/Zl-gUHE70s7wCAoB@google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
HUTRR116 added support for a new usage titled "System Accessibility
Binding" which toggles a system-wide bound accessibility UI or command.
This commit simply adds a new event code for the usage.
Signed-off-by: Aseda Aboagye <aaboagye@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/Zl-e97O9nvudco5z@google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The core change is to detect unusually large number of VPD pages
(caused by device manufacturers having an endiannes issue) and reject
them rather than trying to parse a huge non-existent array.
The remaining fixes are in drivers the most user visible of which is
the ALUA state transition recognition (leads to intermittent I/O
errors in some situations otherwise)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: mcq: Fix error output and clean up ufshcd_mcq_abort()
scsi: core: Handle devices which return an unusually large VPD page count
scsi: mpt3sas: Add missing kerneldoc parameter descriptions
scsi: qedf: Set qed_slowpath_params to zero before use
scsi: qedf: Wait for stag work during unload
scsi: qedf: Don't process stag work during unload and recovery
scsi: sr: Fix unintentional arithmetic wraparound
scsi: core: alua: I/O errors for ALUA state transitions
scsi: mpi3mr: Use proper format specifier in mpi3mr_sas_port_add()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Revert lockdep checking on locking that protects device resets from
user-space config accesses; it exposed issues for which fixes are in
the works but are too risky for this cycle (Dan Williams)
* tag 'pci-v6.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Revert the cfg_access_lock lockdep mechanism
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from BPF and big collection of fixes for WiFi core and
drivers.
Current release - regressions:
- vxlan: fix regression when dropping packets due to invalid src
addresses
- bpf: fix a potential use-after-free in bpf_link_free()
- xdp: revert support for redirect to any xsk socket bound to the
same UMEM as it can result in a corruption
- virtio_net:
- add missing lock protection when reading return code from
control_buf
- fix false-positive lockdep splat in DIM
- Revert "wifi: wilc1000: convert list management to RCU"
- wifi: ath11k: fix error path in ath11k_pcic_ext_irq_config
Previous releases - regressions:
- rtnetlink: make the "split" NLM_DONE handling generic, restore the
old behavior for two cases where we started coalescing those
messages with normal messages, breaking sloppily-coded userspace
- wifi:
- cfg80211: validate HE operation element parsing
- cfg80211: fix 6 GHz scan request building
- mt76: mt7615: add missing chanctx ops
- ath11k: move power type check to ASSOC stage, fix connecting to
6 GHz AP
- ath11k: fix WCN6750 firmware crash caused by 17 num_vdevs
- rtlwifi: ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS
- iwlwifi: mvm: fix a crash on 7265
Previous releases - always broken:
- ncsi: prevent multi-threaded channel probing, a spec violation
- vmxnet3: disable rx data ring on dma allocation failure
- ethtool: init tsinfo stats if requested, prevent unintentionally
reporting all-zero stats on devices which don't implement any
- dst_cache: fix possible races in less common IPv6 features
- tcp: auth: don't consider TCP_CLOSE to be in TCP_AO_ESTABLISHED
- ax25: fix two refcounting bugs
- eth: ionic: fix kernel panic in XDP_TX action
Misc:
- tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB"
* tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
selftests: net: lib: set 'i' as local
selftests: net: lib: avoid error removing empty netns name
selftests: net: lib: support errexit with busywait
net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool()
ipv6: fix possible race in __fib6_drop_pcpu_from()
af_unix: Annotate data-race of sk->sk_shutdown in sk_diag_fill().
af_unix: Use skb_queue_len_lockless() in sk_diag_show_rqlen().
af_unix: Use skb_queue_empty_lockless() in unix_release_sock().
af_unix: Use unix_recvq_full_lockless() in unix_stream_connect().
af_unix: Annotate data-race of net->unx.sysctl_max_dgram_qlen.
af_unix: Annotate data-races around sk->sk_sndbuf.
af_unix: Annotate data-races around sk->sk_state in UNIX_DIAG.
af_unix: Annotate data-race of sk->sk_state in unix_stream_read_skb().
af_unix: Annotate data-races around sk->sk_state in sendmsg() and recvmsg().
af_unix: Annotate data-race of sk->sk_state in unix_accept().
af_unix: Annotate data-race of sk->sk_state in unix_stream_connect().
af_unix: Annotate data-races around sk->sk_state in unix_write_space() and poll().
af_unix: Annotate data-race of sk->sk_state in unix_inq_len().
af_unix: Annodate data-races around sk->sk_state for writers.
af_unix: Set sk->sk_state under unix_state_lock() for truly disconencted peer.
...
|
|
We normally ksm_zero_pages++ in ksmd when page is merged with zero page,
but ksm_zero_pages-- is done from page tables side, where there is no any
accessing protection of ksm_zero_pages.
So we can read very exceptional value of ksm_zero_pages in rare cases,
such as -1, which is very confusing to users.
Fix it by changing to use atomic_long_t, and the same case with the
mm->ksm_zero_pages.
Link: https://lkml.kernel.org/r/20240528-b4-ksm-counters-v3-2-34bb358fdc13@linux.dev
Fixes: e2942062e01d ("ksm: count all zero pages placed by KSM")
Fixes: 6080d19f0704 ("ksm: add ksm zero pages for each process")
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
if CONFIG_SYSFS is not enabled in config, we get the below error,
All errors (new ones prefixed by >>):
s390-linux-ld: mm/memory.o: in function `count_mthp_stat':
>> include/linux/huge_mm.h:285:(.text+0x191c): undefined reference to `mthp_stats'
s390-linux-ld: mm/huge_memory.o:(.rodata+0x10): undefined reference to `mthp_stats'
vim +285 include/linux/huge_mm.h
279
280 static inline void count_mthp_stat(int order, enum mthp_stat_item item)
281 {
282 if (order <= 0 || order > PMD_ORDER)
283 return;
284
> 285 this_cpu_inc(mthp_stats.stats[order][item]);
286 }
287
Link: https://lkml.kernel.org/r/20240523210045.40444-1-21cnbao@gmail.com
Fixes: ec33687c6749 ("mm: add per-order mTHP anon_fault_alloc and anon_fault_fallback counters")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405231728.tCAogiSI-lkp@intel.com/
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The mTHP swap related counters: 'anon_swpout' and 'anon_swpout_fallback'
are confusing with an 'anon_' prefix, since the shmem can swap out
non-anonymous pages. So drop the 'anon_' prefix to keep consistent with
the old swap counter names.
This is needed in 6.10-rcX to avoid having an inconsistent ABI out in the
field.
Link: https://lkml.kernel.org/r/7a8989c13299920d7589007a30065c3e2c19f0e0.1716431702.git.baolin.wang@linux.alibaba.com
Fixes: d0f048ac39f6 ("mm: add per-order mTHP anon_swpout and anon_swpout_fallback counters")
Fixes: 42248b9d34ea ("mm: add docs for per-order mTHP counters and transhuge_page ABI")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix the ACPI EC and AC drivers, the ACPI APEI error injection
driver and build issues related to the dev_is_pnp() macro referring to
pnp_bus_type that is not exported to modules.
Specifics:
- Fix error handling during EC operation region accesses in the ACPI
EC driver (Armin Wolf)
- Fix a memory leak in the APEI error injection driver introduced
during its converion to a platform driver (Dan Williams)
- Fix build failures related to the dev_is_pnp() macro by redefining
it as a proper function and exporting it to modules as appropriate
and unexport pnp_bus_type which need not be exported any more (Andy
Shevchenko)
- Update the ACPI AC driver to use power_supply_changed() to let the
power supply core handle configuration changes properly (Thomas
Weißschuh)"
* tag 'acpi-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: AC: Properly notify powermanagement core about changes
PNP: Hide pnp_bus_type from the non-PNP code
PNP: Make dev_is_pnp() to be a function and export it for modules
ACPI: EC: Avoid returning AE_OK on errors in address space handler
ACPI: EC: Abort address space access upon error
ACPI: APEI: EINJ: Fix einj_dev release leak
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the intel_pstate and amd-pstate cpufreq drivers and the
cpupower utility.
Specifics:
- Fix a recently introduced unchecked HWP MSR access in the
intel_pstate driver (Srinivas Pandruvada)
- Add missing conversion from MHz to KHz to amd_pstate_set_boost() to
address sysfs inteface inconsistency and fix P-state frequency
reporting on AMD Family 1Ah CPUs in the cpupower utility (Dhananjay
Ugwekar)
- Get rid of an excess global header file used by the amd-pstate
cpufreq driver (Arnd Bergmann)"
* tag 'pm-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix unchecked HWP MSR access
cpufreq: amd-pstate: Fix the inconsistency in max frequency units
cpufreq: amd-pstate: remove global header file
tools/power/cpupower: Fix Pstate frequency reporting on AMD Family 1Ah CPUs
|
|
For ${atomic}_sub_and_test() the @i parameter is the value to subtract,
not add. Fix the typo in the kerneldoc template and generate the headers
with this update.
Fixes: ad8110706f38 ("locking/atomic: scripts: generate kerneldoc comments")
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240515133844.3502360-1-cmllamas@google.com
|
