| Age | Commit message (Collapse) | Author |
|---|
|
The verifier assigns ids to scalar registers/stack slots when they are
linked through a mov or stack spill/fill instruction. These ids are
later used to propagate newly found bounds from one register to all
registers that share the same id. The verifier also compares the ids of
these registers in current state and cached state when making pruning
decisions.
When an ID becomes singular (i.e., only a single register or stack slot
has that ID), it can no longer participate in bounds propagation. During
comparisons between current and cached states for pruning decisions,
however, such stale IDs can prevent pruning of otherwise equivalent
states.
Find and clear all singular ids before caching a state in
is_state_visited(). struct bpf_idset which is currently unused has been
repurposed for this use case.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement fsession support in the arm64 BPF JIT trampoline.
Extend the trampoline stack layout to store function metadata and
session cookies, and pass the appropriate metadata to fentry and
fexit programs. This mirrors the existing x86 behavior and enables
session cookies on arm64.
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260131144950.16294-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The added fsession does not prevent running on those architectures, that
haven't added fsession support.
For example, try to run fsession tests on arm64:
test_fsession_basic:PASS:fsession_test__open_and_load 0 nsec
test_fsession_basic:PASS:fsession_attach 0 nsec
check_result:FAIL:test_run_opts err unexpected error: -14 (errno 14)
In order to prevent such errors, add bpf_jit_supports_fsession() to guard
those architectures.
Fixes: 2d419c44658f ("bpf: add fsession support")
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260131144950.16294-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Allowing sleepable programs to use tail calls.
Making sure we can't mix sleepable and non-sleepable bpf programs
in tail call map (BPF_MAP_TYPE_PROG_ARRAY) and allowing it to be
used in sleepable programs.
Sleepable programs can be preempted and sleep which might bring
new source of race conditions, but both direct and indirect tail
calls should not be affected.
Direct tail calls work by patching direct jump to callee into bpf
caller program, so no problem there. We atomically switch from nop
to jump instruction.
Indirect tail call reads the callee from the map and then jumps to
it. The callee bpf program can't disappear (be released) from the
caller, because it is executed under rcu lock (rcu_read_lock_trace).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260130081208.1130204-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We are going to remove "ftrace_ops->private == bpf_trampoline" setup
in following changes.
Adding ip argument to ftrace_ops_func_t callback function, so we can
use it to look up the trampoline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-9-jolsa@kernel.org
|
|
Following changes need to lookup trampoline based on its ip address,
adding hash table for that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-8-jolsa@kernel.org
|
|
Adding update_ftrace_direct_mod function that modifies all entries
(ip -> direct) provided in hash argument to direct ftrace ops and
updates its attachments.
The difference to current modify_ftrace_direct is:
- hash argument that allows to modify multiple ip -> direct
entries at once
This change will allow us to have simple ftrace_ops for all bpf
direct interface users in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-7-jolsa@kernel.org
|
|
Adding update_ftrace_direct_del function that removes all entries
(ip -> addr) provided in hash argument to direct ftrace ops and
updates its attachments.
The difference to current unregister_ftrace_direct is
- hash argument that allows to unregister multiple ip -> direct
entries at once
- we can call update_ftrace_direct_del multiple times on the
same ftrace_ops object, becase we do not need to unregister
all entries at once, we can do it gradualy with the help of
ftrace_update_ops function
This change will allow us to have simple ftrace_ops for all bpf
direct interface users in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-6-jolsa@kernel.org
|
|
Adding update_ftrace_direct_add function that adds all entries
(ip -> addr) provided in hash argument to direct ftrace ops
and updates its attachments.
The difference to current register_ftrace_direct is
- hash argument that allows to register multiple ip -> direct
entries at once
- we can call update_ftrace_direct_add multiple times on the
same ftrace_ops object, becase after first registration with
register_ftrace_function_nolock, it uses ftrace_update_ops to
update the ftrace_ops object
This change will allow us to have simple ftrace_ops for all bpf
direct interface users in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-5-jolsa@kernel.org
|
|
We are going to use these functions in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-4-jolsa@kernel.org
|
|
At the moment the we allow the jmp attach only for ftrace_ops that
has FTRACE_OPS_FL_JMP set. This conflicts with following changes
where we use single ftrace_ops object for all direct call sites,
so all could be be attached via just call or jmp.
We already limit the jmp attach support with config option and bit
(LSB) set on the trampoline address. It turns out that's actually
enough to limit the jmp attach for architecture and only for chosen
addresses (with LSB bit set).
Each user of register_ftrace_direct or modify_ftrace_direct can set
the trampoline bit (LSB) to indicate it has to be attached by jmp.
The bpf trampoline generation code uses trampoline flags to generate
jmp-attach specific code and ftrace inner code uses the trampoline
bit (LSB) to handle return from jmp attachment, so there's no harm
to remove the FTRACE_OPS_FL_JMP bit.
The fexit/fmodret performance stays the same (did not drop),
current code:
fentry : 77.904 ± 0.546M/s
fexit : 62.430 ± 0.554M/s
fmodret : 66.503 ± 0.902M/s
with this change:
fentry : 80.472 ± 0.061M/s
fexit : 63.995 ± 0.127M/s
fmodret : 67.362 ± 0.175M/s
Fixes: 25e4e3565d45 ("ftrace: Introduce FTRACE_OPS_FL_JMP")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-2-jolsa@kernel.org
|
|
This commit fixes a security issue where BPF_PROG_DETACH on tcx or
netkit devices could be executed by any user when no program fd was
provided, bypassing permission checks. The fix adds a capability
check for CAP_NET_ADMIN or CAP_SYS_ADMIN in this case.
Fixes: e420bed02507 ("bpf: Add fd-based tcx multi-prog infra with link support")
Signed-off-by: Guillaume Gonnet <ggonnet.linux@gmail.com>
Link: https://lore.kernel.org/r/20260127160200.10395-1-ggonnet.linux@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A socket using sockmap has its own independent receive queue: ingress_msg.
This queue may contain data from its own protocol stack or from other
sockets.
Therefore, for sockmap, relying solely on copied_seq and rcv_nxt to
calculate FIONREAD is not enough.
This patch adds a new msg_tot_len field in the psock structure to record
the data length in ingress_msg. Additionally, we implement new ioctl
interfaces for TCP and UDP to intercept FIONREAD operations.
Note that we intentionally do not include sk_receive_queue data in the
FIONREAD result. Data in sk_receive_queue has not yet been processed by
the BPF verdict program, and may be redirected to other sockets or
dropped. Including it would create semantic ambiguity since this data
may never be readable by the user.
Unix and VSOCK sockets have similar issues, but fixing them is outside
the scope of this patch as it would require more intrusive changes.
Previous work by John Fastabend made some efforts towards FIONREAD support:
commit e5c6de5fa025 ("bpf, sockmap: Incorrectly handling copied_seq")
Although the current patch is based on the previous work by John Fastabend,
it is acceptable for our Fixes tag to point to the same commit.
FD1:read()
-- FD1->copied_seq++
| [read data]
|
[enqueue data] v
[sockmap] -> ingress to self -> ingress_msg queue
FD1 native stack ------> ^
-- FD1->rcv_nxt++ -> redirect to other | [enqueue data]
| |
| ingress to FD1
v ^
... | [sockmap]
FD2 native stack
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20260124113314.113584-3-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A socket using sockmap has its own independent receive queue: ingress_msg.
This queue may contain data from its own protocol stack or from other
sockets.
The issue is that when reading from ingress_msg, we update tp->copied_seq
by default. However, if the data is not from its own protocol stack,
tcp->rcv_nxt is not increased. Later, if we convert this socket to a
native socket, reading from this socket may fail because copied_seq might
be significantly larger than rcv_nxt.
This fix also addresses the syzkaller-reported bug referenced in the
Closes tag.
This patch marks the skmsg objects in ingress_msg. When reading, we update
copied_seq only if the data is from its own protocol stack.
FD1:read()
-- FD1->copied_seq++
| [read data]
|
[enqueue data] v
[sockmap] -> ingress to self -> ingress_msg queue
FD1 native stack ------> ^
-- FD1->rcv_nxt++ -> redirect to other | [enqueue data]
| |
| ingress to FD1
v ^
... | [sockmap]
FD2 native stack
Closes: https://syzkaller.appspot.com/bug?extid=06dbd397158ec0ea4983
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260124113314.113584-2-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, the BPF cgroup iterator supports walking descendants in
either pre-order (BPF_CGROUP_ITER_DESCENDANTS_PRE) or post-order
(BPF_CGROUP_ITER_DESCENDANTS_POST). These modes perform an exhaustive
depth-first search (DFS) of the hierarchy. In scenarios where a BPF
program may need to inspect only the direct children of a given parent
cgroup, a full DFS is unnecessarily expensive.
This patch introduces a new BPF cgroup iterator control option,
BPF_CGROUP_ITER_CHILDREN. This control option restricts the traversal
to the immediate children of a specified parent cgroup, allowing for
more targeted and efficient iteration, particularly when exhaustive
depth-first search (DFS) traversal is not required.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20260127085112.3608687-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement session cookie for fsession. The session cookies will be stored
in the stack, and the layout of the stack will look like this:
return value -> 8 bytes
argN -> 8 bytes
...
arg1 -> 8 bytes
nr_args -> 8 bytes
ip (optional) -> 8 bytes
cookie2 -> 8 bytes
cookie1 -> 8 bytes
The offset of the cookie for the current bpf program, which is in 8-byte
units, is stored in the
"(((u64 *)ctx)[-1] >> BPF_TRAMP_COOKIE_INDEX_SHIFT) & 0xFF". Therefore, we
can get the session cookie with ((u64 *)ctx)[-offset].
Implement and inline the bpf_session_cookie() for the fsession in the
verifier.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260124062008.8657-6-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If fsession exists, we will use the bit (1 << BPF_TRAMP_IS_RETURN_SHIFT)
in ((u64 *)ctx)[-1] to store the "is_return" flag.
The logic of bpf_session_is_return() for fsession is implemented in the
verifier by inline following code:
bool bpf_session_is_return(void *ctx)
{
return (((u64 *)ctx)[-1] >> BPF_TRAMP_IS_RETURN_SHIFT) & 1;
}
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Co-developed-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260124062008.8657-5-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The fsession is something that similar to kprobe session. It allow to
attach a single BPF program to both the entry and the exit of the target
functions.
Introduce the struct bpf_fsession_link, which allows to add the link to
both the fentry and fexit progs_hlist of the trampoline.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Co-developed-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260124062008.8657-2-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The TAS fallback can be invoked directly when queued spin locks are
disabled, and through the slow path when paravirt is enabled for queued
spin locks. In the latter case, the res_spin_lock macro will attempt the
fast path and already hold the entry when entering the slow path. This
will lead to creation of extraneous entries that are not released, which
may cause false positives for deadlock detection.
Fix this by always preceding invocation of the TAS fallback in every
case with the grabbing of the held lock entry, and add a comment to make
note of this.
Fixes: c9102a68c070 ("rqspinlock: Add a test-and-set fallback")
Reported-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Tested-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260122115911.3668985-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A kernel function bpf_foo marked with KF_IMPLICIT_ARGS flag is
expected to have two associated types in BTF:
* `bpf_foo` with a function prototype that omits implicit arguments
* `bpf_foo_impl` with a function prototype that matches the kernel
declaration of `bpf_foo`, but doesn't have a ksym associated with
its name
In order to support kfuncs with implicit arguments, the verifier has
to know how to resolve a call of `bpf_foo` to the correct BTF function
prototype and address.
To implement this, in add_kfunc_call() kfunc flags are checked for
KF_IMPLICIT_ARGS. For such kfuncs a BTF func prototype is adjusted to
the one found for `bpf_foo_impl` (func_name + "_impl" suffix, by
convention) function in BTF.
This effectively changes the signature of the `bpf_foo` kfunc in the
context of verification: from one without implicit args to the one
with full argument list.
The values of implicit arguments by design are provided by the
verifier, and so they can only be of particular types. In this patch
the only allowed implicit arg type is a pointer to struct
bpf_prog_aux.
In order for the verifier to correctly set an implicit bpf_prog_aux
arg value at runtime, is_kfunc_arg_prog() is extended to check for the
arg type. At a point when prog arg is determined in check_kfunc_args()
the kfunc with implicit args already has a prototype with full
argument list, so the existing value patch mechanism just works.
If a new kfunc with KF_IMPLICIT_ARG is declared for an existing kfunc
that uses a __prog argument (a legacy case), the prototype
substitution works in exactly the same way, assuming the kfunc follows
the _impl naming convention. The difference is only in how _impl
prototype is added to the BTF, which is not the verifier's
concern. See a subsequent resolve_btfids patch for details.
__prog suffix is still supported at this point, but will be removed in
a subsequent patch, after current users are moved to KF_IMPLICIT_ARGS.
Introduction of KF_IMPLICIT_ARGS revealed an issue with zero-extension
tracking, because an explicit rX = 0 in place of the verifier-supplied
argument is now absent if the arg is implicit (the BPF prog doesn't
pass a dummy NULL anymore). To mitigate this, reset the subreg_def of
all caller saved registers in check_kfunc_call() [1].
[1] https://lore.kernel.org/bpf/b4a760ef828d40dac7ea6074d39452bb0dc82caa.camel@gmail.com/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-4-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
btf_kfunc_id_set_contains() is called by fetch_kfunc_meta() in the BPF
verifier to get the kfunc flags stored in the .BTF_ids ELF section.
If it returns NULL instead of a valid pointer, it's interpreted as an
illegal kfunc usage failing the verification.
There are two potential reasons for btf_kfunc_id_set_contains() to
return NULL:
1. Provided kfunc BTF id is not present in relevant kfunc id sets.
2. The kfunc is not allowed, as determined by the program type
specific filter [1].
The filter functions accept a pointer to `struct bpf_prog`, so they
might implicitly depend on earlier stages of verification, when
bpf_prog members are set.
For example, bpf_qdisc_kfunc_filter() in linux/net/sched/bpf_qdisc.c
inspects prog->aux->st_ops [2], which is initialized in:
check_attach_btf_id() -> check_struct_ops_btf_id()
So far this hasn't been an issue, because fetch_kfunc_meta() is the
only caller of btf_kfunc_id_set_contains().
However in subsequent patches of this series it is necessary to
inspect kfunc flags earlier in BPF verifier, in the add_kfunc_call().
To resolve this, refactor btf_kfunc_id_set_contains() into two
interface functions:
* btf_kfunc_flags() that simply returns pointer to kfunc_flags
without applying the filters
* btf_kfunc_is_allowed() that both checks for kfunc_flags existence
(which is a requirement for a kfunc to be allowed) and applies the
prog filters
See [3] for the previous version of this patch.
[1] https://lore.kernel.org/all/20230519225157.760788-7-aditi.ghag@isovalent.com/
[2] https://lore.kernel.org/all/20250409214606.2000194-4-ameryhung@gmail.com/
[3] https://lore.kernel.org/bpf/20251029190113.3323406-3-ihor.solodrai@linux.dev/
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-2-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, reset_idmap_scratch() performs a 4.7KB memset() in every
states_equal() call. Optimize this by using a counter to track used
ID mappings, replacing the O(N) memset() with an O(1) reset and
bounding the search loop in check_ids().
Signed-off-by: Qiliang Yuan <realwujing@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260120023234.77673-1-realwujing@gmail.com
|
|
Mahe reported issue with bpf_override_return helper not working when
executed from kprobe.multi bpf program on arm.
The problem is that on arm we use alternate storage for pt_regs object
that is passed to bpf_prog_run and if any register is changed (which
is the case of bpf_override_return) it's not propagated back to actual
pt_regs object.
Fixing this by introducing and calling ftrace_partial_regs_update function
to propagate the values of changed registers (ip and stack).
Reported-by: Mahe Tardy <mahe.tardy@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/bpf/20260112121157.854473-1-jolsa@kernel.org
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Adjacent:
Auto-merging MAINTAINERS
Auto-merging Makefile
Auto-merging kernel/bpf/verifier.c
Auto-merging kernel/sched/ext.c
Auto-merging mm/memcontrol.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Improve btf_find_by_name_kind() performance by adding binary search
support for sorted types. Falls back to linear search for compatibility.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-7-dolinux.peng@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Minor fixes and cleanups for the MSHV driver
* tag 'hyperv-fixes-signed-20260112' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: release mutex on region invalidation failure
hyperv: Avoid -Wflex-array-member-not-at-end warning
mshv: hide x86-specific functions on arm64
mshv: Initialize local variables early upon region invalidation
mshv: Use PMD_ORDER instead of HPAGE_PMD_ORDER when processing regions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
- Fix -Wflex-array-member-not-at-end warnings in cgroup_root
* tag 'cgroup-for-6.19-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Eliminate cgrp_ancestor_storage in cgroup_root
|
|
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fix from Rafael Wysocki:
"This fixes the ACPI/PCI legacy interrupts (INTx) parsing in the case
when the ACPI Global System Interrupt (GSI) value is a 32-bit one with
the MSB set.
That was interpreted as a negative integer and caused
acpi_pci_link_allocate_irq() to fail and acpi_irq_get_penalty() to
trigger an out-of-bounds array dereference (Lorenzo Pieralisi)"
* tag 'acpi-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PCI: IRQ: Fix INTx GSIs signedness
|
|
Pull drm fixes from Dave Airlie:
"I missed the drm-rust fixes tree for last week, so this catches up on
that, along with amdgpu, and then some misc fixes across a few
drivers. I hadn't got an xe pull by the time I sent this, I suspect
one will arrive 10 mins after, but I don't think there is anything
that can't wait for next week.
Things seem to have picked up a little with people coming back from
holidays,
MAINTAINERS:
- Fix Nova GPU driver git links
- Fix typo in TYR driver entry preventing correct behavior of
scripts/get_maintainer.pl
- Exclude TYR driver from DRM MISC
nova-core:
- Correctly select RUST_FW_LOADER_ABSTRACTIONS to prevent build
errors
- Regenerate nova-core bindgen bindings with '--explicit-padding' to
avoid uninitialized bytes
- Fix length of received GSP messages, due to miscalculated message
payload size
- Regenerate bindings to derive MaybeZeroable
- Use a bindings alias to derive the firmware version
exynos:
- hdmi: replace system_wq with system_percpu_wq
pl111:
- Fix error handling in probe
mediatek/atomic/tidss:
- Fix tidss in another way and revert reordering of pre-enable and
post-disable operations, as it breaks other bridge drivers
nouveau:
- Fix regression from fwsec s/r fix
pci/vga:
- Fix multiple gpu's being reported a 'boot_display'
fb-helper:
- Fix vblank timeout during suspend/reset
amdgpu:
- Clang fixes
- Navi1x PCIe DPM fixes
- Ring reset fixes
- ISP suspend fix
- Analog DC fixes
- VPE fixes
- Mode1 reset fix
radeon:
- Variable sized array fix"
* tag 'drm-fixes-2026-01-09' of https://gitlab.freedesktop.org/drm/kernel: (32 commits)
Reapply "Revert "drm/amd: Skip power ungate during suspend for VPE""
drm/amd/display: Check NULL before calling dac_load_detection
drm/amd/pm: Disable MMIO access during SMU Mode 1 reset
drm/exynos: hdmi: replace use of system_wq with system_percpu_wq
drm/fb-helper: Fix vblank timeout during suspend/reset
PCI/VGA: Don't assume the only VGA device on a system is `boot_vga`
drm/amdgpu: Fix query for VPE block_type and ip_count
drm/amd/display: Add missing encoder setup to DACnEncoderControl
drm/amd/display: Correct color depth for SelectCRTC_Source
drm/amd/amdgpu: Fix SMU warning during isp suspend-resume
drm/amdgpu: always backup and reemit fences
drm/amdgpu: don't reemit ring contents more than once
drm/amd/pm: force send pcie parmater on navi1x
drm/amd/pm: fix wrong pcie parameter on navi1x
drm/radeon: Remove __counted_by from ClockInfoArray.clockInfo[]
drm/amd/display: Reduce number of arguments of dcn30's CalculateWatermarksAndDRAMSpeedChangeSupport()
drm/amd/display: Reduce number of arguments of dcn30's CalculatePrefetchSchedule()
drm/amd/display: Apply e4479aecf658 to dml
nouveau: don't attempt fwsec on sb on newer platforms
drm/tidss: Fix enable/disable order
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Remove incorrect __user annotation from struct xattr_args::value
- Documentation fix: Add missing kernel-doc description for the @isnew
parameter in ilookup5_nowait() to silence Sphinx warnings
- Documentation fix: Fix kernel-doc comment for __start_dirop() - the
function name in the comment was wrong and the @state parameter was
undocumented
- Replace dynamic folio_batch allocation with stack allocation in
iomap_zero_range(). The dynamic allocation was problematic for
ext4-on-iomap work (didn't handle allocation failure properly) and
triggered lockdep complaints. Uses a flag instead to control batch
usage
- Re-add #ifdef guards around PIDFD_GET_<ns-type>_NAMESPACE ioctls.
When a namespace type is disabled, ns->ops is NULL, causes crashes
during inode eviction when closing the fd. The ifdefs were removed in
a recent simplification but are still needed
- Fixe a race where a folio could be unlocked before the trailing zeros
(for EOF within the page) were written
- Split out a dedicated lease_dispose_list() helper since lease code
paths always know they're disposing of leases. Removes unnecessary
runtime flag checks and prepares for upcoming lease_manager
enhancements
- Fix userland delegation requests succeeding despite conflicting
opens. Previously, FL_LAYOUT and FL_DELEG leases bypassed conflict
checks (a hack for nfsd). Adds new ->lm_open_conflict() lease_manager
operation so userland delegations get proper conflict checking while
nfsd can continue its own conflict handling
- Fix LOOKUP_CACHED path lookups incorrectly falling through to the
slow path. After legitimize_links() calls were conditionally elided,
the routine would always fail with LOOKUP_CACHED regardless of
whether there were any links. Now the flag is checked at the two
callsites before calling legitimize_links()
- Fix bug in media fd allocation in media_request_alloc()
- Fix mismatched API calls in ecryptfs_mknod(): was calling
end_removing() instead of end_creating() after
ecryptfs_start_creating_dentry()
- Fix dentry reference count leak in ecryptfs_mkdir(): a dget() of the
lower parent dir was added but never dput()'d, causing BUG during
lower filesystem unmount due to the still-in-use dentry
* tag 'vfs-6.19-rc5.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pidfs: protect PIDFD_GET_* ioctls() via ifdef
ecryptfs: Release lower parent dentry after creating dir
ecryptfs: Fix improper mknod pairing of start_creating()/end_removing()
get rid of bogus __user in struct xattr_args::value
VFS: fix __start_dirop() kernel-doc warnings
fs: Describe @isnew parameter in ilookup5_nowait()
fs: make sure to fail try_to_unlazy() and try_to_unlazy() for LOOKUP_CACHED
netfs: Fix early read unlock of page with EOF in middle
filelock: allow lease_managers to dictate what qualifies as a conflict
filelock: add lease_dispose_list() helper
iomap: replace folio_batch allocation with stack allocation
media: mc: fix potential use-after-free in media_request_alloc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Remove useless assignment of soft_mode variable
The function __ftrace_event_enable_disable() sets "soft_mode" in one
of the branch paths but doesn't use it after that. Remove the setting
of that variable.
- Add a cond_resched() in ring_buffer_resize()
The resize function that allocates all the pages for the ring buffer
was causing a soft lockup on PREEMPT_NONE configs when allocating
large buffers on machines with many CPUs. Hopefully this is the last
cond_resched() needed to be added as PREEMPT_LAZY becomes the norm in
the future.
- Make ftrace_graph_ent depth field signed
The "depth" field of struct ftrace_graph_ent was converted from "int"
to "unsigned long" for alignment reasons to work with being embedded
in other structures. The conversion from a signed to unsigned caused
integrity checks to always pass as they were comparing "depth" to
less than zero. Make the field signed long.
- Add recursion protection to stack trace events
A infinite recursion was triggered by a stack trace event calling RCU
which internally called rcu_read_unlock_special(), which triggered an
event that was also doing stacktraces which cause it to trigger the
same RCU lock that called rcu_read_unlock_special() again.
Update the trace_test_and_set_recursion() to add a set of context
checks for events to use, and have the stack trace event use that for
recursion protection.
- Make the variable ftrace_dump_on_oops static
The cleanup of sysctl that moved all the updates to the files that
use them moved the reference of ftrace_dump_on_oops to where it is
used. It is no longer used outside of the trace.c file. Make it
static.
* tag 'trace-v6.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
trace: ftrace_dump_on_oops[] is not exported, make it static
tracing: Add recursion protection in kernel stack trace recording
ftrace: Make ftrace_graph_ent depth field signed
ring-buffer: Avoid softlockup in ring_buffer_resize() during memory free
tracing: Drop unneeded assignment to soft_mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and wireless.
Current release - fix to a fix:
- net: do not write to msg_get_inq in callee
- arp: do not assume dev_hard_header() does not change skb->head
Current release - regressions:
- wifi: mac80211: don't iterate not running interfaces
- eth: mlx5: fix NULL pointer dereference in ioctl module EEPROM
Current release - new code bugs:
- eth: bnge: add AUXILIARY_BUS to Kconfig dependencies
Previous releases - regressions:
- eth: mlx5: dealloc forgotten PSP RX modify header
Previous releases - always broken:
- ping: fix ICMP out SNMP stats double-counting with ICMP sockets
- bonding: preserve NETIF_F_ALL_FOR_ALL across TSO updates
- bridge: fix C-VLAN preservation in 802.1ad vlan_tunnel egress
- eth: bnxt: fix potential data corruption with HW GRO/LRO"
* tag 'net-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
arp: do not assume dev_hard_header() does not change skb->head
net: enetc: fix build warning when PAGE_SIZE is greater than 128K
atm: Fix dma_free_coherent() size
tools: ynl: don't install tests
net: do not write to msg_get_inq in callee
bnxt_en: Fix NULL pointer crash in bnxt_ptp_enable during error cleanup
net: usb: pegasus: fix memory leak in update_eth_regs_async()
net: 3com: 3c59x: fix possible null dereference in vortex_probe1()
net/sched: sch_qfq: Fix NULL deref when deactivating inactive aggregate in qfq_reset
wifi: mac80211: collect station statistics earlier when disconnect
wifi: mac80211: restore non-chanctx injection behaviour
wifi: mac80211_hwsim: disable BHs for hwsim_radio_lock
wifi: mac80211: don't iterate not running interfaces
wifi: mac80211_hwsim: fix typo in frequency notification
wifi: avoid kernel-infoleak from struct iw_point
net: airoha: Fix schedule while atomic in airoha_ppe_deinit()
selftests: netdevsim: add carrier state consistency test
net: netdevsim: fix inconsistent carrier state after link/unlink
selftests: drv-net: Bring back tool() to driver __init__s
net/sched: act_api: avoid dereferencing ERR_PTR in tcf_idrinfo_destroy
...
|
|
The cgrp_ancestor_storage has two drawbacks:
- it's not guaranteed that the member immediately follows struct cgrp in
cgroup_root (root cgroup's ancestors[0] might thus point to a padding
and not in cgrp_ancestor_storage proper),
- this idiom raises warnings with -Wflex-array-member-not-at-end.
Instead of relying on the auxiliary member in cgroup_root, define the
0-th level ancestor inside struct cgroup (needed for static allocation
of cgrp_dfl_root), deeper cgroups would allocate flexible
_low_ancestors[]. Unionized alias through ancestors[] will
transparently join the two ranges.
The above change would still leave the flexible array at the end of
struct cgroup inside cgroup_root, so move cgrp also towards the end of
cgroup_root to resolve the -Wflex-array-member-not-at-end.
Link: https://lore.kernel.org/r/5fb74444-2fbb-476e-b1bf-3f3e279d0ced@embeddedor.com/
Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Closes: https://lore.kernel.org/r/b3eb050d-9451-4b60-b06c-ace7dab57497@embeddedor.com/
Cc: David Laight <david.laight.linux@gmail.com>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc5:
pl111:
- Fix error handling in probe
mediatek/atomic/tidss:
- Fix tidss in another way and revert reordering of pre-enable and post-disable operations,
as it breaks other bridge drivers.
nouveau:
- Fix regression from fwsec s/r fix.
pci/vga:
- Fix multiple gpu's being reported a 'boot_display'
fb-helper:
- Fix vblank timeout during suspend/reset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f50067e6-243a-4ed8-9781-1e4e4fdebc8e@linux.intel.com
|
|
A bug was reported about an infinite recursion caused by tracing the rcu
events with the kernel stack trace trigger enabled. The stack trace code
called back into RCU which then called the stack trace again.
Expand the ftrace recursion protection to add a set of bits to protect
events from recursion. Each bit represents the context that the event is
in (normal, softirq, interrupt and NMI).
Have the stack trace code use the interrupt context to protect against
recursion.
Note, the bug showed an issue in both the RCU code as well as the tracing
stacktrace code. This only handles the tracing stack trace side of the
bug. The RCU fix will be handled separately.
Link: https://lore.kernel.org/all/20260102122807.7025fc87@gandalf.local.home/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20260105203141.515cd49f@gandalf.local.home
Reported-by: Yao Kai <yaokai34@huawei.com>
Tested-by: Yao Kai <yaokai34@huawei.com>
Fixes: 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in __rcu_read_unlock()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The code has integrity checks to make sure that depth never goes below
zero. But the depth field has recently been converted to unsigned long
from "int" (for alignment reasons). As unsigned long can never be less
than zero, the integrity checks no longer work.
Convert depth to long from unsigned long to allow the integrity checks to
work again.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: pengdonglin <pengdonglin@xiaomi.com>
Link: https://patch.msgid.link/20260102143148.251c2e16@gandalf.local.home
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aS6kGi0maWBl-MjZ@stanley.mountain/
Fixes: f83ac7544fbf7 ("function_graph: Enable funcgraph-args and funcgraph-retaddr to work simultaneously")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
percpu_cgroup_storage maps
Introduce BPF_F_ALL_CPUS flag support for percpu_cgroup_storage maps to
allow updating values for all CPUs with a single value for update_elem
API.
Introduce BPF_F_CPU flag support for percpu_cgroup_storage maps to
allow:
* update value for specified CPU for update_elem API.
* lookup value for specified CPU for lookup_elem API.
The BPF_F_CPU flag is passed via map_flags along with embedded cpu info.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260107022022.12843-6-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
lru_percpu_hash maps
Introduce BPF_F_ALL_CPUS flag support for percpu_hash and lru_percpu_hash
maps to allow updating values for all CPUs with a single value for both
update_elem and update_batch APIs.
Introduce BPF_F_CPU flag support for percpu_hash and lru_percpu_hash
maps to allow:
* update value for specified CPU for both update_elem and update_batch
APIs.
* lookup value for specified CPU for both lookup_elem and lookup_batch
APIs.
The BPF_F_CPU flag is passed via:
* map_flags along with embedded cpu info.
* elem_flags along with embedded cpu info.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260107022022.12843-4-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce support for the BPF_F_ALL_CPUS flag in percpu_array maps to
allow updating values for all CPUs with a single value for both
update_elem and update_batch APIs.
Introduce support for the BPF_F_CPU flag in percpu_array maps to allow:
* update value for specified CPU for both update_elem and update_batch
APIs.
* lookup value for specified CPU for both lookup_elem and lookup_batch
APIs.
The BPF_F_CPU flag is passed via:
* map_flags of lookup_elem and update_elem APIs along with embedded cpu
info.
* elem_flags of lookup_batch and update_batch APIs along with embedded
cpu info.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260107022022.12843-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags and check them for
following APIs:
* 'map_lookup_elem()'
* 'map_update_elem()'
* 'generic_map_lookup_batch()'
* 'generic_map_update_batch()'
And, get the correct value size for these APIs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260107022022.12843-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"A set of NFSD fixes for stable that arrived after the merge window:
- Remove an invalid NFS status code
- Fix an fstests failure when using pNFS
- Fix a UAF in v4_end_grace()
- Fix the administrative interface used to revoke NFSv4 state
- Fix a memory leak reported by syzbot"
* tag 'nfsd-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: net ref data still needs to be freed even if net hasn't startup
nfsd: check that server is running in unlock_filesystem
nfsd: use correct loop termination in nfsd4_revoke_states()
nfsd: provide locking for v4_end_grace
NFSD: Fix permission check for read access to executable-only files
NFSD: Remove NFSERR_EAGAIN
|
|
mem_cgroup_usage() is not used outside of memcg-v1 code,
the declaration was added by a mistake.
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lore.kernel.org/r/20260106042313.140256-1-roman.gushchin@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix typos in npu rx DMA descriptor definitions.
Fixes: b3ef7bdec66fb ("net: airoha: Add airoha_offload.h header")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260102-airoha-npu-dma-rx-def-fixes-v1-1-205fc6bf7d94@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential deadlock due to mismatching transaction states when
waiting for the current transaction
- fix squota accounting with nested snapshots
- fix quota inheritance of qgroups with multiple parent qgroups
- fix NULL inode pointer in evict tracepoint
- fix writes beyond end of file on systems with 64K page size and 4K
block size
- fix logging of inodes after exchange rename
- fix use after free when using ref_tracker feature
- space reservation fixes
* tag 'for-6.19-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix reservation leak in some error paths when inserting inline extent
btrfs: do not free data reservation in fallback from inline due to -ENOSPC
btrfs: fix use-after-free warning in btrfs_get_or_create_delayed_node()
btrfs: always detect conflicting inodes when logging inode refs
btrfs: fix beyond-EOF write handling
btrfs: fix deadlock in wait_current_trans() due to ignored transaction type
btrfs: fix NULL dereference on root when tracing inode eviction
btrfs: qgroup: update all parent qgroups when doing quick inherit
btrfs: fix qgroup_snapshot_quick_inherit() squota bug
|
|
In ACPI Global System Interrupts (GSIs) are described using a 32-bit
value.
ACPI/PCI legacy interrupts (INTx) parsing code treats GSIs as 'int',
which poses issues if the GSI interrupt value is a 32-bit value with the
MSB set (as required in some interrupt configurations - eg ARM64 GICv5
systems) because acpi_pci_link_allocate_irq() treats a negative gsi
return value as a failed GSI allocation (and acpi_irq_get_penalty()
would trigger an out-of-bounds array dereference if the 'irq' param is
a negative value).
Fix ACPI/PCI legacy INTx parsing by converting variables representing
GSIs from 'int' to 'u32' bringing the code in line with the ACPI
specification and fixing the current parsing issue.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260105101705.36703-1-lpieralisi@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Directly increment the TSO features incurs a side effect: it will also
directly clear the flags in NETIF_F_ALL_FOR_ALL on the master device,
which can cause issues such as the inability to enable the nocache copy
feature on the bonding driver.
The fix is to include NETIF_F_ALL_FOR_ALL in the update mask, thereby
preventing it from being cleared.
Fixes: b0ce3508b25e ("bonding: allow TSO being set on bonding master")
Signed-off-by: Di Zhu <zhud@hygon.cn>
Link: https://patch.msgid.link/20251224012224.56185-1-zhud@hygon.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry fix from Borislav Petkov:
- Make sure clang inlines trivial local_irq_* helpers
* tag 'core_urgent_for_v6.19_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Always inline local_irq_{enable,disable}_exit_to_user()
|
|
Export and namespace those not prefixed with drm_* so
it becomes possible to write custom commit tail functions
in individual drivers using the helper infrastructure.
Tested-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: stable@vger.kernel.org # v6.17+
Fixes: c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable")
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Tested-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251205-drm-seq-fix-v1-3-fda68fa1b3de@ideasonboard.com
|
|
This reverts commit c9b1150a68d9362a0827609fc0dc1664c0d8bfe1.
Changing the enable/disable sequence has caused regressions on multiple
platforms: R-Car, MCDE, Rockchip. A series (see link below) was sent to
fix these, but it was decided that it's better to revert the original
patch and change the enable/disable sequence only in the tidss driver.
Reverting this commit breaks tidss's DSI and OLDI outputs, which will be
fixed in the following commits.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/all/20251202-mcde-drm-regression-thirdfix-v6-0-f1bffd4ec0fa%40kernel.org/
Fixes: c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable")
Cc: stable@vger.kernel.org # v6.17+
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Tested-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251205-drm-seq-fix-v1-1-fda68fa1b3de@ideasonboard.com
|
