summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2026-02-05can: remove private CAN skb headroom infrastructureOliver Hartkopp
This patch removes struct can_skb_priv which was stored at skb->head and the can_skb_reserve() helper which was used to shift skb->head. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://patch.msgid.link/20260201-can_skb_ext-v8-5-3635d790fe8b@hartkopp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-05can: add CAN skb extension infrastructureOliver Hartkopp
To remove the private CAN bus skb headroom infrastructure 8 bytes need to be stored in the skb. The skb extensions are a common pattern and an easy and efficient way to hold private data travelling along with the skb. We only need the skb_ext_add() and skb_ext_find() functions to allocate and access CAN specific content as the skb helpers to copy/clone/free skbs automatically take care of skb extensions and their final removal. This patch introduces the complete CAN skb extensions infrastructure: - add struct can_skb_ext in new file include/net/can.h - add include/net/can.h in MAINTAINERS - add SKB_EXT_CAN to skbuff.c and skbuff.h - select SKB_EXTENSIONS in Kconfig when CONFIG_CAN is enabled - check for existing CAN skb extensions in can_rcv() in af_can.c - add CAN skb extensions allocation at every skb_alloc() location - duplicate the skb extensions if cloning outgoing skbs (framelen/gw_hops) - introduce can_skb_ext_add() and can_skb_ext_find() helpers The patch also corrects an indention issue in the original code from 2018: Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202602010426.PnGrYAk3-lkp@intel.com/ Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://patch.msgid.link/20260201-can_skb_ext-v8-2-3635d790fe8b@hartkopp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-05can: use skb hash instead of private variable in headroomOliver Hartkopp
The can_skb_priv::skbcnt variable is used to identify CAN skbs in the RX path analogue to the skb->hash. As the skb hash is not filled in CAN skbs move the private skbcnt value to skb->hash and set skb->sw_hash accordingly. The skb->hash is a value used for RPS to identify skbs. Use it as intended. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://patch.msgid.link/20260201-can_skb_ext-v8-1-3635d790fe8b@hartkopp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-04net/mlx5e: RX, Drop oversized packets in non-linear modeDragos Tatulea
Currently the driver has an inconsistent behaviour between modes when it comes to oversized packets that are not dropped through the physical MTU check in HW. This can happen for Multi Host configurations where each port has a different MTU. Current behavior: 1) Striding RQ in linear mode drops the packet in SW and counts it with oversize_pkts_sw_drop. 2) Striding RQ in non-linear mode allows it like a normal packet. 3) Legacy RQ can't receive oversized packets by design: the RX WQE uses MTU sized packet buffers. This inconsistency is not a violation of the netdev policy [1] but it is better to be consistent across modes. This patch aligns (2) with (1) and (3). One exception is added for LRO: don't drop the oversized packet if it is an LRO packet. As now rq->hw_mtu always needs to be updated during the MTU change flow, drop the reset avoidance optimization from mlx5e_change_mtu(). Extract the CQE LRO segments reading into a helper function as it is used twice now. [1] Documentation/networking/netdevices.rst#L205 Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260203072130.1710255-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-04net: stmmac: remove support for lpi_intr_oRussell King (Oracle)
The dwmac databook for v3.74a states that lpi_intr_o is a sideband signal which should be used to ungate the application clock, and this signal is synchronous to the receive clock. The receive clock can run at 2.5, 25 or 125MHz depending on the media speed, and can stop under the control of the link partner. This means that the time it takes to clear is dependent on the negotiated media speed, and thus can be 8, 40, or 400ns after reading the LPI control and status register. It has been observed with some aggressive link partners, this clock can stop while lpi_intr_o is still asserted, meaning that the signal remains asserted for an indefinite period that the local system has no direct control over. The LPI interrupts will still be signalled through the main interrupt path in any case, and this path is not dependent on the receive clock. This, since we do not gate the application clock, and the chances of adding clock gating in the future are slim due to the clocks being ill-defined, lpi_intr_o serves no useful purpose. Remove the code which requests the interrupt, and all associated code. Reported-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com> Tested-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com> # Renesas RZ/V2H board Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vnJbt-00000007YYN-28nm@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-04net/iucv: clean up iucv kernel-doc warningsRandy Dunlap
Fix numerous (many) kernel-doc warnings in iucv.[ch]: - convert function documentation comments to a common (kernel-doc) look, even for static functions (without "/**") - use matching parameter and parameter description names - use better wording in function descriptions (Jakub & AI) - remove duplicate kernel-doc comments from the header file (Jakub) Examples: Warning: include/net/iucv/iucv.h:210 missing initial short description on line: * iucv_unregister Warning: include/net/iucv/iucv.h:216 function parameter 'handle' not described in 'iucv_unregister' Warning: include/net/iucv/iucv.h:467 function parameter 'answer' not described in 'iucv_message_send2way' Warning: net/iucv/iucv.c:727 missing initial short description on line: * iucv_cleanup_queue Build-tested with both "make htmldocs" and "make ARCH=s390 defconfig all". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://patch.msgid.link/20260203075248.1177869-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-04net: stmmac: Fix typo from clk_scr_i to clk_csr_iHuacai Chen
In include/linux/stmmac.h clk_csr_i is spelled as clk_scr_i by mistake, so correct the typo. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn> Link: https://patch.msgid.link/20260203062658.2156653-1-chenhuacai@loongson.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-04tcp: split tcp_check_space() in two partsEric Dumazet
tcp_check_space() is fat and not inlined. Move its slow path in (out of line) __tcp_check_space() and make tcp_check_space() an inline function for better TCP performance. $ scripts/bloat-o-meter -t vmlinux.old vmlinux.new add/remove: 2/2 grow/shrink: 4/0 up/down: 708/-582 (126) Function old new delta __tcp_check_space - 521 +521 tcp_rcv_established 1860 1916 +56 tcp_rcv_state_process 3342 3384 +42 tcp_event_new_data_sent 248 286 +38 tcp_data_snd_check 71 106 +35 __pfx___tcp_check_space - 16 +16 __pfx_tcp_check_space 16 - -16 tcp_check_space 566 - -566 Total: Before=24896373, After=24896499, chg +0.00% Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260203050932.3522221-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-04Merge tag 'wireless-next-2026-02-04' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Some more changes, including pulls from drivers: - ath drivers: small features/cleanups - rtw drivers: mostly refactoring for rtw89 RTL8922DE support - mac80211: use hrtimers for CAC to avoid too long delays - cfg80211/mac80211: some initial UHR (Wi-Fi 8) support * tag 'wireless-next-2026-02-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (59 commits) wifi: brcmsmac: phy: Remove unreachable error handling code wifi: mac80211: Add eMLSR/eMLMR action frame parsing support wifi: mac80211: add initial UHR support wifi: cfg80211: add initial UHR support wifi: ieee80211: add some initial UHR definitions wifi: mac80211: use wiphy_hrtimer_work for CAC timeout wifi: mac80211: correct ieee80211-{s1g/eht}.h include guard comments wifi: ath12k: clear stale link mapping of ahvif->links_map wifi: ath12k: Add support TX hardware queue stats wifi: ath12k: Add support RX PDEV stats wifi: ath12k: Fix index decrement when array_len is zero wifi: ath12k: support OBSS PD configuration for AP mode wifi: ath12k: add WMI support for spatial reuse parameter configuration dt-bindings: net: wireless: ath11k-pci: deprecate 'firmware-name' property wifi: ath11k: add usecase firmware handling based on device compatible wifi: ath10k: sdio: add missing lock protection in ath10k_sdio_fw_crashed_dump() wifi: ath10k: fix lock protection in ath10k_wmi_event_peer_sta_ps_state_chg() wifi: ath10k: snoc: support powering on the device via pwrseq wifi: rtw89: pci: warn if SPS OCP happens for RTL8922DE wifi: rtw89: pci: restore LDO setting after device resume ... ==================== Link: https://patch.msgid.link/20260204121143.181112-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-04trace: mptcp: add mptcp_rcvbuf_grow tracepointPaolo Abeni
Similar to tcp, provide a new tracepoint to better understand mptcp_rcv_space_adjust() behavior, which presents many artifacts. Note that the used format string is so long that I preferred wrap it, contrary to guidance for quoted strings. Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-4-31ec8bfc56d1@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-03net: usb: introduce usbnet_mii_ioctl helper functionEthan Nelson-Moore
Many USB network drivers use identical code to pass ioctl requests on to the MII layer. Reduce code duplication by refactoring this code into a helper function. Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> (v1) Reviewed-by: Andrew Lunn <andrew@lunn.ch> (v3) Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20260203013517.26170-1-enelsonmoore@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-03tcp: accecn: add tcpi_ecn_mode and tcpi_option2 in tcp_infoChia-Yu Chang
Add 2-bit tcpi_ecn_mode feild within tcp_info to indicate which ECN mode is negotiated: ECN_MODE_DISABLED, ECN_MODE_RFC3168, ECN_MODE_ACCECN, or ECN_MODE_PENDING. This is done by utilizing available bits from tcpi_accecn_opt_seen (reduced from 16 bits to 2 bits) and tcpi_accecn_fail_mode (reduced from 16 bits to 4 bits). Also, an extra 24-bit tcpi_options2 field is identified to represent newer options and connection features, as all 8 bits of tcpi_options field have been used. Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Co-developed-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260131222515.8485-14-chia-yu.chang@nokia-bell-labs.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-03tcp: accecn: detect loss ACK w/ AccECN option and add TCP_ACCECN_OPTION_PERSISTChia-Yu Chang
Detect spurious retransmission of a previously sent ACK carrying the AccECN option after the second retransmission. Since this might be caused by the middlebox dropping ACK with options it does not recognize, disable the sending of the AccECN option in all subsequent ACKs. This patch follows Section 3.2.3.2.2 of AccECN spec (RFC9768), and a new field (accecn_opt_sent_w_dsack) is added to indicate that an AccECN option was sent with duplicate SACK info. Also, a new AccECN option sending mode is added to tcp_ecn_option sysctl: (TCP_ECN_OPTION_PERSIST), which ignores the AccECN fallback policy and persistently sends AccECN option once it fits into TCP option space. Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260131222515.8485-13-chia-yu.chang@nokia-bell-labs.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-03tcp: accecn: fallback outgoing half link to non-AccECNChia-Yu Chang
According to Section 3.2.2.1 of AccECN spec (RFC9768), if the Server is in AccECN mode and in SYN-RCVD state, and if it receives a value of zero on a pure ACK with SYN=0 and no SACK blocks, for the rest of the connection the Server MUST NOT set ECT on outgoing packets and MUST NOT respond to AccECN feedback. Nonetheless, as a Data Receiver it MUST NOT disable AccECN feedback. Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260131222515.8485-12-chia-yu.chang@nokia-bell-labs.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-03tcp: accecn: retransmit SYN/ACK without AccECN option or non-AccECN SYN/ACKChia-Yu Chang
For Accurate ECN, the first SYN/ACK sent by the TCP server shall set the ACE flag (Table 1 of RFC9768) and the AccECN option to complete the capability negotiation. However, if the TCP server needs to retransmit such a SYN/ACK (for example, because it did not receive an ACK acknowledging its SYN/ACK, or received a second SYN requesting AccECN support), the TCP server retransmits the SYN/ACK without the AccECN option. This is because the SYN/ACK may be lost due to congestion, or a middlebox may block the AccECN option. Furthermore, if this retransmission also times out, to expedite connection establishment, the TCP server should retransmit the SYN/ACK with (AE,CWR,ECE) = (0,0,0) and without the AccECN option, while maintaining AccECN feedback mode. This complies with Section 3.2.3.2.2 of the AccECN spec RFC9768. Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260131222515.8485-10-chia-yu.chang@nokia-bell-labs.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-03tcp: add TCP_SYNACK_RETRANS synack_typeChia-Yu Chang
Before this patch, retransmitted SYN/ACK did not have a specific synack_type; however, the upcoming patch needs to distinguish between retransmitted and non-retransmitted SYN/ACK for AccECN negotiation to transmit the fallback SYN/ACK during AccECN negotiation. Therefore, this patch introduces a new synack_type (TCP_SYNACK_RETRANS). Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260131222515.8485-9-chia-yu.chang@nokia-bell-labs.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-03tcp: accecn: handle unexpected AccECN negotiation feedbackChia-Yu Chang
According to Sections 3.1.2 and 3.1.3 of AccECN spec (RFC9768). In Section 3.1.2, it says an AccECN implementation has no need to recognize or support the Server response labelled 'Nonce' or ECN-nonce feedback more generally, as RFC 3540 has been reclassified as Historic. AccECN is compatible with alternative ECN feedback integrity approaches to the nonce. The SYN/ACK labelled 'Nonce' with (AE,CWR,ECE) = (1,0,1) is reserved for future use. A TCP Client (A) that receives such a SYN/ACK follows the procedure for forward compatibility given in Section 3.1.3. Then in Section 3.1.3, it says if a TCP Client has sent a SYN requesting AccECN feedback with (AE,CWR,ECE) = (1,1,1) then receives a SYN/ACK with the currently reserved combination (AE,CWR,ECE) = (1,0,1) but it does not have logic specific to such a combination, the Client MUST enable AccECN mode as if the SYN/ACK onfirmed that the Server supported AccECN and as if it fed back that the IP-ECN field on the SYN had arrived unchanged. Fixes: 3cae34274c79 ("tcp: accecn: AccECN negotiation"). Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260131222515.8485-7-chia-yu.chang@nokia-bell-labs.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-03tcp: disable RFC3168 fallback identifier for CC modulesChia-Yu Chang
When AccECN is not successfully negociated for a TCP flow, it defaults fallback to classic ECN (RFC3168). However, L4S service will fallback to non-ECN. This patch enables congestion control module to control whether it should not fallback to classic ECN after unsuccessful AccECN negotiation. A new CA module flag (TCP_CONG_NO_FALLBACK_RFC3168) identifies this behavior expected by the CA. Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260131222515.8485-6-chia-yu.chang@nokia-bell-labs.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-03tcp: ECT_1_NEGOTIATION and NEEDS_ACCECN identifiersChia-Yu Chang
Two flags for congestion control (CC) module are added in this patch related to AccECN negotiation. First, a new flag (TCP_CONG_NEEDS_ACCECN) defines that the CC expects to negotiate AccECN functionality using the ECE, CWR and AE flags in the TCP header. Second, during ECN negotiation, ECT(0) in the IP header is used. This patch enables CC to control whether ECT(0) or ECT(1) should be used on a per-segment basis. A new flag (TCP_CONG_ECT_1_NEGOTIATION) defines the expected ECT value in the IP header by the CA when not-yet initialized for the connection. The detailed AccECN negotiaotn can be found in IETF RFC9768. Co-developed-by: Olivier Tilmans <olivier.tilmans@nokia.com> Signed-off-by: Olivier Tilmans <olivier.tilmans@nokia.com> Signed-off-by: Ilpo Järvinen <ij@kernel.org> Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260131222515.8485-5-chia-yu.chang@nokia-bell-labs.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-03tcp: try to avoid safer when ACKs are thinnedIlpo Järvinen
Add newly acked pkts EWMA. When ACK thinning occurs, select between safer and unsafe cep delta in AccECN processing based on it. If the packets ACKed per ACK tends to be large, don't conservatively assume ACE field overflow. This patch uses the existing 2-byte holes in the rx group for new u16 variables withtout creating more holes. Below are the pahole outcomes before and after this patch: [BEFORE THIS PATCH] struct tcp_sock { [...] u32 delivered_ecn_bytes[3]; /* 2744 12 */ /* XXX 4 bytes hole, try to pack */ [...] __cacheline_group_end__tcp_sock_write_rx[0]; /* 2816 0 */ [...] /* size: 3264, cachelines: 51, members: 177 */ } [AFTER THIS PATCH] struct tcp_sock { [...] u32 delivered_ecn_bytes[3]; /* 2744 12 */ u16 pkts_acked_ewma; /* 2756 2 */ /* XXX 2 bytes hole, try to pack */ [...] __cacheline_group_end__tcp_sock_write_rx[0]; /* 2816 0 */ [...] /* size: 3264, cachelines: 51, members: 178 */ } Signed-off-by: Ilpo Järvinen <ij@kernel.org> Co-developed-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260131222515.8485-2-chia-yu.chang@nokia-bell-labs.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-03net: phy: remove modalias-based mdio bus matchingHeiner Kallweit
Last user dsa_loop has been migrated away from modalias-based matching, so we can remove this feature now. It was the only user of MDIO_NAME_SIZE, so remove also this constant. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/ce1c6df0-4785-4b28-8322-32dc6bceea18@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-02tcp: export tcp_splice_stateGeliang Tang
Export struct tcp_splice_state and tcp_splice_data_recv() in net/tcp.h so that they can be used by MPTCP in the next patch. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Acked-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260130-net-next-mptcp-splice-v2-3-31332ba70d7f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-02ptp: vmclock: support device notificationsBabis Chalios
Add optional support for device notifications in VMClock. When supported, the hypervisor will send a device notification every time it updates the seq_count to a new even value. Moreover, add support for poll() in VMClock as a means to propagate this notification to user space. poll() will return a POLLIN event to listeners every time seq_count changes to a value different than the one last seen (since open() or last read()/pread()). This means that when poll() returns a POLLIN event, listeners need to use read() to observe what has changed and update the reader's view of seq_count. In other words, after a poll() returned, all subsequent calls to poll() will immediately return with a POLLIN event until the listener calls read(). The device advertises support for the notification mechanism by setting flag VMCLOCK_FLAG_NOTIFICATION_PRESENT in vmclock_abi flags field. If the flag is not present the driver won't setup the ACPI notification handler and poll() will always immediately return POLLHUP. Signed-off-by: Babis Chalios <bchalios@amazon.es> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Takahiro Itazuri <itazur@amazon.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Tested-by: Takahiro Itazuri <itazur@amazon.com> Link: https://patch.msgid.link/20260130173704.12575-3-itazur@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-02ptp: vmclock: add vm generation counterBabis Chalios
Similar to live migration, loading a VM from some saved state (aka snapshot) is also an event that calls for clock adjustments in the guest. However, guests might want to take more actions as a response to such events, e.g. as discarding UUIDs, resetting network connections, reseeding entropy pools, etc. These are actions that guests don't typically take during live migration, so add a new field in the vmclock_abi called vm_generation_counter which informs the guest about such events. Hypervisor advertises support for vm_generation_counter through the VMCLOCK_FLAG_VM_GEN_COUNTER_PRESENT flag. Users need to check the presence of this bit in vmclock_abi flags field before using this flag. Signed-off-by: Babis Chalios <bchalios@amazon.es> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Tested-by: Takahiro Itazur <itazur@amazon.com> Link: https://patch.msgid.link/20260130173704.12575-2-itazur@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-02ipv6: colocate inet6_cork in inet_cork_fullEric Dumazet
All inet6_cork users also use one inet_cork_full. Reduce number of parameters and increase data locality. This saves ~275 bytes of code on x86_64. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260130210303.3888261-9-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-02inet: add dst4_mtu() and dst6_mtu() helpersEric Dumazet
With CONFIG_MITIGATION_RETPOLINE=y dst_mtu() is a bit fat, because it is generic. Indeed, clang does not always inline it. Add dst4_mtu() and dst6_mtu() helpers for callers that expect either ipv4_mtu() or ip6_mtu() to be called. These helpers are always inlined. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260130210303.3888261-6-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-02ipv6: pass proto by value to ipv6_push_nfrag_opts() and ipv6_push_frag_opts()Eric Dumazet
With CONFIG_STACKPROTECTOR_STRONG=y, it is better to avoid passing a pointer to an automatic variable. Change these exported functions to return 'u8 proto' instead of void. - ipv6_push_nfrag_opts() - ipv6_push_frag_opts() For instance, replace ipv6_push_frag_opts(skb, opt, &proto); with: proto = ipv6_push_frag_opts(skb, opt, proto); Note that even after this change, ip6_xmit() has to use a stack canary because of @first_hop variable. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260130210303.3888261-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-02net: add a debug check in __skb_push()Eric Dumazet
Add the following check, to detect bugs sooner for CONFIG_DEBUG_NET=y builds. DEBUG_NET_WARN_ON_ONCE(skb->data < skb->head); Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260130160253.2936789-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-02net: l3mdev: use skb_dst_dev_rcu() in l3mdev_l3_out()Eric Dumazet
Extend the RCU section a bit so that we can use the safer skb_dst_dev_rcu() helper. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260130191906.3781856-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-02wifi: mac80211: Add eMLSR/eMLMR action frame parsing supportLorenzo Bianconi
Introduce support in AP mode for parsing of the Operating Mode Notification frame sent by the client to enable/disable MLO eMLSR or eMLMR if supported by both the AP and the client. Add drv_set_eml_op_mode mac80211 callback in order to configure underlay driver with eMLSR/eMLMR info. Tested-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20260129-mac80211-emlsr-v4-1-14bdadf57380@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2026-02-02wifi: mac80211: add initial UHR supportJohannes Berg
Add support for making UHR connections and accepting AP stations with UHR support. Link: https://patch.msgid.link/20260130164259.7185980484eb.Ieec940b58dbf8115dab7e1e24cb5513f52c8cb2f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2026-02-02wifi: cfg80211: add initial UHR supportJohannes Berg
Add initial support for making UHR connections (or suppressing that), adding UHR capable stations on the AP side, encoding and decoding UHR MCSes (except rate calculation for the new MCSes 17, 19, 20 and 23) as well as regulatory support. Link: https://patch.msgid.link/20260130164259.54cc12fbb307.I26126bebd83c7ab17e99827489f946ceabb3521f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2026-02-02wifi: ieee80211: add some initial UHR definitionsJohannes Berg
This is based on Draft P802.11bn_D1.2, but that's still very incomplete, so don't handle a number of things and make some local decisions such as using 40 bits for MAC capabilities and 8 bits for PHY capabilities. Link: https://patch.msgid.link/20260130164259.b28c9456ff94.I5b11fb0345a933bf497fd802aecc72932d58dd68@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2026-02-02wifi: mac80211: correct ieee80211-{s1g/eht}.h include guard commentsLachlan Hodges
After the split of ieee80211.h some include guard comments weren't updated, update them to their new file names. Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com> Link: https://patch.msgid.link/20260130005319.70019-1-lachlan.hodges@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2026-01-30net: ax25: remove plumbing for never-implemented DAMA Master supportEthan Nelson-Moore
The AX25_DAMA_MASTER option has been unimplemented and marked broken ever since it was introduced in 2007 in commit 954b2e7f4c37 ("[NET] AX.25 Kconfig and docs updates and fixes"). At this point, it is very unlikely it will be implemented. Remove it. Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com> Link: https://patch.msgid.link/20260129080908.44710-1-enelsonmoore@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-30net: wwan: add NMEA port supportSergey Ryazanov
Many WWAN modems come with embedded GNSS receiver inside and have a dedicated port to output geopositioning data. On the one hand, the GNSS receiver has little in common with WWAN modem and just shares a host interface and should be exported using the GNSS subsystem. On the other hand, GNSS receiver is not automatically activated and needs a generic WWAN control port (AT, MBIM, etc.) to be turned on. And a user space software needs extra information to find the control port. Introduce the new type of WWAN port - NMEA. When driver asks to register a NMEA port, the core allocates common parent WWAN device as usual, but exports the NMEA port via the GNSS subsystem and acts as a proxy between the device driver and the GNSS subsystem. From the WWAN device driver perspective, a NMEA port is registered as a regular WWAN port without any difference. And the driver interacts only with the WWAN core. From the user space perspective, the NMEA port is a GNSS device which parent can be used to enumerate and select the proper control port for the GNSS receiver management. CC: Slark Xiao <slark_xiao@163.com> CC: Muhammad Nuzaihan <zaihan@unrealasia.net> CC: Qiang Yu <quic_qianyu@quicinc.com> CC: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> CC: Johan Hovold <johan@kernel.org> Suggested-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Link: https://patch.msgid.link/20260126062158.308598-6-slark_xiao@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-30tcp: reduce tcp sockets size by one cache lineEric Dumazet
By default, when a kmem_cache is created with SLAB_TYPESAFE_BY_RCU, slub has to use extra storage for the freelist pointer after each object, because slub assumes that any bit in the object can be used by RCU readers. Because proto_register() is also using SLAB_HWCACHE_ALIGN, this forces slub to use one extra cache line per object. We can instead put the slub freelist anywhere in the object, granted the concurrent RCU readers are not supposed to use the pointer value. Add a new (struct sock)sk_freeptr field, in an union with sk_rcu: No RCU readers would need to look at sk_rcu, which is only used at free phase. Tested: grep . /sys/kernel/slab/TCP/{object_size,slab_size,objs_per_slab} grep . /sys/kernel/slab/TCPv6/{object_size,slab_size,objs_per_slab} Before: /sys/kernel/slab/TCP/object_size:2368 /sys/kernel/slab/TCP/slab_size:2432 /sys/kernel/slab/TCP/objs_per_slab:13 /sys/kernel/slab/TCPv6/object_size:2496 /sys/kernel/slab/TCPv6/slab_size:2560 /sys/kernel/slab/TCPv6/objs_per_slab:12 After this patch, we can pack one more TCPv6 object per slab, and object_size == slab_size. /sys/kernel/slab/TCP/object_size:2368 /sys/kernel/slab/TCP/slab_size:2368 /sys/kernel/slab/TCP/objs_per_slab:13 /sys/kernel/slab/TCPv6/object_size:2496 /sys/kernel/slab/TCPv6/slab_size:2496 /sys/kernel/slab/TCPv6/objs_per_slab:13 Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260129153458.4163797-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-29Merge tag 'wireless-next-2026-01-29' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Another fairly large set of changes, notably: - cfg80211/mac80211 - most of EPPKE/802.1X over auth frames support - additional FTM capabilities - split up drop reasons better, removing generic RX_DROP - NAN cleanups/fixes - ath11k: - support for Channel Frequency Response measurement - ath12k: - support for the QCC2072 chipset - iwlwifi: - partial NAN support - UNII-9 support - some UHR/802.11bn FW APIs - remove most of MLO/EHT from iwlmvm (such devices use iwlmld) - rtw89: - preparations for RTL8922DE support * tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (184 commits) wifi: iwlegacy: add missing mutex protection in il4965_store_tx_power() wifi: iwlegacy: add missing mutex protection in il3945_store_measurement() wifi: mac80211: use u64_stats_t with u64_stats_sync properly wifi: p54: Fix memory leak in p54_beacon_update() wifi: cfg80211: treat deprecated INDOOR_SP_AP_OLD control value as LPI mode wifi: rtw88: sdio: Migrate to use sdio specific shutdown function wifi: rsi: sdio: Migrate to use sdio specific shutdown function sdio: Provide a bustype shutdown function wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request wifi: nl80211/cfg80211: add negotiated burst period to FTM result wifi: nl80211/cfg80211: clarify periodic FTM parameters for non-EDCA based ranging wifi: nl80211/cfg80211: add new FTM capabilities wifi: iwlwifi: rename struct iwl_mcc_allowed_ap_type_cmd::offset_map wifi: iwlwifi: mvm: Remove link_id from time_events wifi: iwlwifi: mld: change cluster_id type to u8 array wifi: iwlwifi: support V13 of iwl_lari_config_change_cmd wifi: iwlwifi: split bios_value_u32 to separate the header wifi: iwlwifi: uefi: cache the DSM functions wifi: iwlwifi: acpi: cache the DSM functions wifi: iwlwifi: mvm: Cleanup MLO code ... ==================== Link: https://patch.msgid.link/20260129110136.176980-39-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-29ipv6: optimize fl6_update_dst()Eric Dumazet
fl6_update_dst() is called for every TCP (and others) transmit, and is a nop for common cases. Split it in two parts : 1) fl6_update_dst() inline helper, small and fast. 2) __fl6_update_dst() for the exception, out of line. Small size increase to get better TX performance. $ scripts/bloat-o-meter -t vmlinux.old vmlinux.new add/remove: 2/2 grow/shrink: 8/0 up/down: 296/-125 (171) Function old new delta __fl6_update_dst - 104 +104 rawv6_sendmsg 2244 2284 +40 udpv6_sendmsg 3013 3043 +30 tcp_v6_connect 1514 1534 +20 cookie_v6_check 1501 1519 +18 ip6_datagram_dst_update 673 690 +17 inet6_sk_rebuild_header 499 516 +17 inet6_csk_route_socket 507 524 +17 inet6_csk_route_req 343 360 +17 __pfx___fl6_update_dst - 16 +16 __pfx_fl6_update_dst 16 - -16 fl6_update_dst 109 - -109 Total: Before=22570304, After=22570475, chg +0.00% Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260128185548.3738781-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-29dpll: expose fractional frequency offset in pptIvan Vecera
Currently, the dpll subsystem exports the fractional frequency offset (FFO) in parts per million (ppm). This granularity is insufficient for high-precision synchronization scenarios which often require parts per trillion (ppt) resolution. Add a new netlink attribute DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET_PPT to expose the FFO in ppt. Update the dpll netlink core to expect the driver-provided FFO value to be in ppt. To maintain backward compatibility with existing userspace tools, populate the legacy DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET attribute by dividing the new ppt value by 1,000,000. Update the zl3073x and mlx5 drivers to provide the FFO value in ppt: - zl3073x: adjust the fixed-point calculation to produce ppt (10^12) instead of ppm (10^6). - mlx5: scale the existing ppm value by 1,000,000. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20260126162253.27890-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.19-rc8). No adjacent changes, conflicts: drivers/net/ethernet/spacemit/k1_emac.c 2c84959167d64 ("net: spacemit: Check for netif_carrier_ok() in emac_stats_update()") f66086798f91f ("net: spacemit: Remove broken flow control support") https://lore.kernel.org/aXjAqZA3iEWD_DGM@sirena.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-29Bluetooth: L2CAP: Fix not tracking outstanding TX identLuiz Augusto von Dentz
This attempts to proper track outstanding request by using struct ida and allocating from it in l2cap_get_ident using ida_alloc_range which would reuse ids as they are free, then upon completion release the id using ida_free. This fixes the qualification test case L2CAP/COS/CED/BI-29-C which attempts to check if the host stack is able to work after 256 attempts to connect which requires Ident field to use the full range of possible values in order to pass the test. Link: https://github.com/bluez/bluez/issues/1829 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
2026-01-29Bluetooth: Fix using PHYs bitfields as PHY valueLuiz Augusto von Dentz
This renames the PHY fields in bt_iso_io_qos to PHYs (plural) since it represents a bitfield where multiple PHYs can be set and make the same change also to HCI_OP_LE_SET_CIG_PARAMS since both c_phy and p_phy fields are bitfields. This also fixes the assumption that hci_evt_le_cis_established PHYs fields are compatible with bt_iso_io_qos, they are not, the fields in hci_evt_le_cis_established represent just a single PHY value so they need to be converted to bitfield when set in bt_iso_io_qos. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2026-01-29Bluetooth: L2CAP: Add support for setting BT_PHYLuiz Augusto von Dentz
This enables client to use setsockopt(BT_PHY) to set the connection packet type/PHY: Example setting BT_PHY_BR_1M_1SLOT: < HCI Command: Change Conne.. (0x01|0x000f) plen 4 Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation) Packet type: 0x331e 2-DH1 may not be used 3-DH1 may not be used DM1 may be used DH1 may be used 2-DH3 may not be used 3-DH3 may not be used 2-DH5 may not be used 3-DH5 may not be used > HCI Event: Command Status (0x0f) plen 4 Change Connection Packet Type (0x01|0x000f) ncmd 1 Status: Success (0x00) > HCI Event: Connection Packet Typ.. (0x1d) plen 5 Status: Success (0x00) Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation) Packet type: 0x331e 2-DH1 may not be used 3-DH1 may not be used DM1 may be used DH1 may be used 2-DH3 may not be used 3-DH3 may not be used 2-DH5 may not be used Example setting BT_PHY_LE_1M_TX and BT_PHY_LE_1M_RX: < HCI Command: LE Set PHY (0x08|0x0032) plen 7 Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation) All PHYs preference: 0x00 TX PHYs preference: 0x01 LE 1M RX PHYs preference: 0x01 LE 1M PHY options preference: Reserved (0x0000) > HCI Event: Command Status (0x0f) plen 4 LE Set PHY (0x08|0x0032) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 6 LE PHY Update Complete (0x0c) Status: Success (0x00) Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation) TX PHY: LE 1M (0x01) RX PHY: LE 1M (0x01) Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2026-01-29Bluetooth: hci_sync: Add LE Channel Sounding HCI Command/event structuresNaga Bhavani Akella
1. Implement LE Event Mask to include events required for LE Channel Sounding 2. Enable Channel Sounding feature bit in the LE Host Supported Features command 3. Define HCI command and event structures necessary for LE Channel Sounding functionality Signed-off-by: Naga Bhavani Akella <naga.akella@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2026-01-29Merge tag 'net-6.19-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth, CAN and wireless. There are no known regressions currently under investigation. Current release - fix to a fix: - can: gs_usb_receive_bulk_callback(): fix error message Current release - regressions: - eth: gve: fix probe failure if clock read fails Previous releases - regressions: - ipv6: use the right ifindex when replying to icmpv6 from localhost - mptcp: fix race in mptcp_pm_nl_flush_addrs_doit() - bluetooth: fix null-ptr-deref in hci_uart_write_work - eth: - sfc: fix deadlock in RSS config read - ice: ifix NULL pointer dereference in ice_vsi_set_napi_queues - mlx5: fix memory leak in esw_acl_ingress_lgcy_setup() Previous releases - always broken: - core: fix segmentation of forwarding fraglist GRO - wifi: mac80211: correctly decode TTLM with default link map - mptcp: avoid dup SUB_CLOSED events after disconnect - nfc: fix memleak in nfc_llcp_send_ui_frame(). - eth: - bonding: fix use-after-free due to enslave fail - mlx5e: - TC, delete flows only for existing peers - fix inverted cap check in tx flow table root disconnect" * tag 'net-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits) net: fix segmentation of forwarding fraglist GRO wifi: mac80211: correctly decode TTLM with default link map selftests: mptcp: join: fix local endp not being tracked selftests: mptcp: check subflow errors in close events mptcp: only reset subflow errors when propagated selftests: mptcp: check no dup close events after error mptcp: avoid dup SUB_CLOSED events after disconnect net/mlx5e: Skip ESN replay window setup for IPsec crypto offload net/mlx5: Fix vhca_id access call trace use before alloc net/mlx5: fs, Fix inverted cap check in tx flow table root disconnect net: phy: micrel: fix clk warning when removing the driver net/mlx5e: don't assume psp tx skbs are ipv6 csum handling net: bridge: fix static key check nfc: nci: Fix race between rfkill and nci_unregister_device(). gve: fix probe failure if clock read fails net/mlx5e: Account for netdev stats in ndo_get_stats64 net/mlx5e: TC, delete flows only for existing peers net/mlx5: Fix Unbinding uplink-netdev in switchdev mode ice: stop counting UDP csum mismatch as rx_errors ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues ...
2026-01-29Bluetooth: hci_conn: Fix using conn->le_{tx,rx}_phy as supported PHYsLuiz Augusto von Dentz
conn->le_{tx,rx}_phy is not actually a bitfield as it set by HCI_EV_LE_PHY_UPDATE_COMPLETE it is actually correspond to the current PHY in use not what is supported by the controller, so this introduces different fields (conn->le_{tx,rx}_def_phys) to track what PHYs are supported by the connection. Fixes: eab2404ba798 ("Bluetooth: Add BT_PHY socket option") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2026-01-29netfilter: nfnetlink_queue: optimize verdict lookup with hash tableScott Mitchell
The current implementation uses a linear list to find queued packets by ID when processing verdicts from userspace. With large queue depths and out-of-order verdicting, this O(n) lookup becomes a significant bottleneck, causing userspace verdict processing to dominate CPU time. Replace the linear search with a hash table for O(1) average-case packet lookup by ID. A global rhashtable spanning all network namespaces attributes hash bucket memory to kernel but is subject to fixed upper bound. Signed-off-by: Scott Mitchell <scott.k.mitch1@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de>
2026-01-28nfc: nci: Fix race between rfkill and nci_unregister_device().Kuniyuki Iwashima
syzbot reported the splat below [0] without a repro. It indicates that struct nci_dev.cmd_wq had been destroyed before nci_close_device() was called via rfkill. nci_dev.cmd_wq is only destroyed in nci_unregister_device(), which (I think) was called from virtual_ncidev_close() when syzbot close()d an fd of virtual_ncidev. The problem is that nci_unregister_device() destroys nci_dev.cmd_wq first and then calls nfc_unregister_device(), which removes the device from rfkill by rfkill_unregister(). So, the device is still visible via rfkill even after nci_dev.cmd_wq is destroyed. Let's unregister the device from rfkill first in nci_unregister_device(). Note that we cannot call nfc_unregister_device() before nci_close_device() because 1) nfc_unregister_device() calls device_del() which frees all memory allocated by devm_kzalloc() and linked to ndev->conn_info_list 2) nci_rx_work() could try to queue nci_conn_info to ndev->conn_info_list which could be leaked Thus, nfc_unregister_device() is split into two functions so we can remove rfkill interfaces only before nci_close_device(). [0]: DEBUG_LOCKS_WARN_ON(1) WARNING: kernel/locking/lockdep.c:238 at hlock_class kernel/locking/lockdep.c:238 [inline], CPU#0: syz.0.8675/6349 WARNING: kernel/locking/lockdep.c:238 at check_wait_context kernel/locking/lockdep.c:4854 [inline], CPU#0: syz.0.8675/6349 WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x39d/0x2cf0 kernel/locking/lockdep.c:5187, CPU#0: syz.0.8675/6349 Modules linked in: CPU: 0 UID: 0 PID: 6349 Comm: syz.0.8675 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026 RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline] RIP: 0010:check_wait_context kernel/locking/lockdep.c:4854 [inline] RIP: 0010:__lock_acquire+0x3a4/0x2cf0 kernel/locking/lockdep.c:5187 Code: 18 00 4c 8b 74 24 08 75 27 90 e8 17 f2 fc 02 85 c0 74 1c 83 3d 50 e0 4e 0e 00 75 13 48 8d 3d 43 f7 51 0e 48 c7 c6 8b 3a de 8d <67> 48 0f b9 3a 90 31 c0 0f b6 98 c4 00 00 00 41 8b 45 20 25 ff 1f RSP: 0018:ffffc9000c767680 EFLAGS: 00010046 RAX: 0000000000000001 RBX: 0000000000040000 RCX: 0000000000080000 RDX: ffffc90013080000 RSI: ffffffff8dde3a8b RDI: ffffffff8ff24ca0 RBP: 0000000000000003 R08: ffffffff8fef35a3 R09: 1ffffffff1fde6b4 R10: dffffc0000000000 R11: fffffbfff1fde6b5 R12: 00000000000012a2 R13: ffff888030338ba8 R14: ffff888030338000 R15: ffff888030338b30 FS: 00007fa5995f66c0(0000) GS:ffff8881256f8000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7e72f842d0 CR3: 00000000485a0000 CR4: 00000000003526f0 Call Trace: <TASK> lock_acquire+0x106/0x330 kernel/locking/lockdep.c:5868 touch_wq_lockdep_map+0xcb/0x180 kernel/workqueue.c:3940 __flush_workqueue+0x14b/0x14f0 kernel/workqueue.c:3982 nci_close_device+0x302/0x630 net/nfc/nci/core.c:567 nci_dev_down+0x3b/0x50 net/nfc/nci/core.c:639 nfc_dev_down+0x152/0x290 net/nfc/core.c:161 nfc_rfkill_set_block+0x2d/0x100 net/nfc/core.c:179 rfkill_set_block+0x1d2/0x440 net/rfkill/core.c:346 rfkill_fop_write+0x461/0x5a0 net/rfkill/core.c:1301 vfs_write+0x29a/0xb90 fs/read_write.c:684 ksys_write+0x150/0x270 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa59b39acb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fa5995f6028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fa59b615fa0 RCX: 00007fa59b39acb9 RDX: 0000000000000008 RSI: 0000200000000080 RDI: 0000000000000007 RBP: 00007fa59b408bf7 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fa59b616038 R14: 00007fa59b615fa0 R15: 00007ffc82218788 </TASK> Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation") Reported-by: syzbot+f9c5fd1a0874f9069dce@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/695e7f56.050a0220.1c677c.036c.GAE@google.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260127040411.494931-1-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-28tcp: move tcp_rack_advance() to tcp_input.cEric Dumazet
tcp_rack_advance() is called from tcp_ack() and tcp_sacktag_one(). Moving it to tcp_input.c allows the compiler to inline it and save both space and cpu cycles in TCP fast path. $ scripts/bloat-o-meter -t vmlinux.1 vmlinux.2 add/remove: 0/2 grow/shrink: 1/1 up/down: 98/-132 (-34) Function old new delta tcp_ack 5741 5839 +98 tcp_sacktag_one 407 395 -12 __pfx_tcp_rack_advance 16 - -16 tcp_rack_advance 104 - -104 Total: Before=22572680, After=22572646, chg -0.00% Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260127032147.3498272-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>