| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All fixes in drivers (or the tape ULD) and one core fix to bsg (the
block ioctl equivalent of sg_io).
The biggest is the race in auth updates fix in iscsi configfs, but the
next biggest one is in bsg but the generic pieces of that are mostly
threading reply_len"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: bsg: Pass reply_len to bsg_setup_queue() to fit UFS ARPMB replies
scsi: libsas: Fix SMP IO deadlock during HA resume
scsi: libiscsi: Validate the task named by a management response
scsi: libiscsi: Validate the ITT reflected in a Reject PDU
scsi: libiscsi: Reject a negative task index from parse_pdu_itt
scsi: target: iscsi: Fix race in discovery auth updates
scsi: target: Disable interrupts while holding delayed_cmd_lock
scsi: st: Fix use-after-free race between st_remove() and st_open()
scsi: st: Save the visited block for the partition the drive is in
scsi: xen/scsifront: Check for a NULL shadow entry on a backend response
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"The main thing here is a fix for lockdep warnings with MMIO regmaps
that use a raw spinlock and a cache, some other lockdep fixes we'd
done for the benefit of the maple tree on sleeping buses meant that we
were doing allocations for those MMIO regmaps under a raw spinlock.
While fixing that Michael Reeves also noticed that the debugfs files
were briefly available without the cache structures backing them.
There's also a fix for interrupt freeing on error in regmap-irq which
had been hanging around because it's not super urgent"
* tag 'regmap-fix-v7.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Drop map lock during cache init and exit
regmap: Remove debugfs before cache teardown
regmap: irq: Free the irqdomain we create
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix x86 Intel uncore driver bug on Diamond Rapids CPUs
that erroneously always-cleared the invert bit (Guixiong Wei)
- Fix accounting bug in the perf mlock 'gift' code causing
unrelated RLIMIT_MEMLOCK functionality to fail (Lorenzo Stoakes)
- Fix perf_pmu_migrate_context() bug leaving events behind during
CPU hot-unplug (Haris Okanovic)
- Update cgroup time when rotating multiplexed events, to fix
time_running & scaled counts accounting bug (Antoine Huret)
* tag 'perf-urgent-2026-10-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Update cgroup time when rotating multiplexed events
perf: Fix perf_pmu_migrate_context() leaving events behind
perf: Track the perf mlock gift separately
perf/x86/intel/uncore: Fix DMR CXL CM invert filter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
- Fix FUT_OFF_MMSHARED futex hashing bug that can cause
missed wakeups or spurious wakeups on futex-waiting
tasks (Jann Horn)
- Fix lockdep context tracking bug in the deferred hrtimer
rearming entry code, which causes a lockdep chain leak
that will eventually turn lockdep off (Mikhail Gavrilov)
* tag 'locking-urgent-2026-10-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Account the deferred hrtimer rearm as hardirq context for lockdep
futex: Fix mm reuse handling for FUT_OFF_MMSHARED
|
|
Pull drm fixes from Dave Airlie:
"Last set of fixes, mostly amdgpu, some i915 and xe.
I think the dma-buf revert is probably the most important: while it is
technically correct the fallout from it means we shouldn't enable
DMABUF_DEBUG like that yet, and fix the fallout first.
Summary:
MAINTAINERS update
dma-buf:
- revert dma-debug y on debug kernel due to msm interaction
core:
- fix drm_exec prelocked object interaction
i915:
- Fix ARL-S host bridge detection
- Add sanity checks for malformed DMC firmware
xe:
- OA uAPI fix
- shrinker fix
- fix eviction of object with no bo resource
- fix LRU for external objects
amdgpu:
- UVD fix
- TTM sched entity fixes
- SMU 14 fix
- Userptr leak fixes
- Runpm ref count fix
- CRIU fix
- UserQ fixes
- USB4 fix
- SDMA 3 fix
virtio-gpu:
- revert double setting blend property
- reset device before deleting vqs on freeze
vc4:
- fix hdmi audio runtime_pm interaction
amdxdna:
- fix Kconfig invalid configuration
rocket:
- fix error path for failed init
- fix core unbinding and scheduler lookup paths
panthor:
- fix immortalis configuration"
* tag 'drm-fixes-2026-10-17' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
drm/amdgpu/sdma3: Work around POLL_REGMEM / FENCE hang
drm/amdgpu: keep the eviction fence until the last handle is closed
drm/amd/display: Fix NULL sink dereference in USB4 bandwidth functions
drm/amdgpu/userq: actually validate userq BOs
drm/amdgpu: report the BO alignment in bytes in GEM_LIST_HANDLES
drm/amdgpu: free the userptr ranges when a CS fails after parser_bos
drm/amdgpu: don't drop the runtime PM reference twice in amdgpu_gpr
drm/amdgpu: fix GEM object leak on ENOMEM in userptr ioctl
drm/amd/pm: add zero fan stop temperature support on smu 14.0.2
drm/amdgpu: destroy mutex when tearing down ttm buffer entity
drm/amdgpu: fix sched entity leak in ttm buffer entity init
drm/amdgpu/uvd3.1: Fix checking whether UVD firmware keyselect was already set
drm/panthor: fix immortalis condition
drm/i915/cx0_phy: Fix ARL-S host bridge detection
drm/i915/dmc: Add sanity check for DMC load address
drm/i915/dmc: Harden DMC firmware payload parsing
drm/exec: don't immediately add prelocked obj to array of locked objs
drm/virtio: Reset device before deleting virtqueues on freeze
drm/xe: Bump LRU for external objects on exec and rebind
drm/xe/oa: Zero OA buffer at allocation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a range of use-after-frees during rcu pathwalk caused by non-rcu
frees.
Whatever ->permission(), ->d_revalidate(), ->get_link(), ->d_hash()
and ->d_compare() read in rcu mode has to be freed after a grace
period. umount(2) hides most of it because namespace_unlock() waits
for one, but a chdir() out of a lazily unmounted directory or the
close() of the last file on it drops the last reference without.
* ext4_get_link() reads the sbi and the extent status counters for a
symlink stored in a data block. Both are freed after a grace
period now.
* The unicode map of casefolded ext4, f2fs and tmpfs was freed under
generic_ci_d_hash() and generic_ci_d_compare().
* ntfs3 with nocase freed its sbi and mount options under its dentry
hash and compare. A remount freed the old options right away too.
* eventfs freed an eventfs_inode after an SRCU grace period only
while tracefs_d_revalidate() reads it under rcu_read_lock().
* afs and 9p are only saved by the grace period their private bdi
gets in bdi_unregister(). They stop depending on it.
* create_ipc_ns() leaked the mqueue mount and its superblock on a
late failure. A long-term mount needs kern_unmount().
- Don't let idle threads pin the initramfs.
The idle threads of the secondary cpus are forked from PID 1 with a
private copy of its fs_struct, aren't on the task list so
pivot_root() never moves them and never exit. So the initramfs stayed
pinned forever on every machine with more than one cpu, 70 to 150 MB
in the reports. They share init_fs now like init_task does.
- A mount that copy_tree() leaves out can't take over a lock.
copy_tree() drops mounts of mount namespace files from the copies it
makes for unshare(CLONE_NEWNS) and propagation without looking at
MNT_LOCKED. So root in a user namespace could bind a child's
/proc/<pid>/ns/mnt beneath a locked cover, let it take the lock over,
unshare(CLONE_NEWNS) and read the file. copy_tree() refuses with
EPERM now and the move beneath a locked mount is refused up front.
- Revert "namei: don't reveal overmounted entries in refwalk" from the
rc7 fixes. The bug class is bigger than that patch.
- namei: lookup_fast_for_open() checked ->d_inode while
traverse_mounts() checks the type in d_flags, which is set second, so
a refwalk racing the instantiation could fail an O_CREAT open with
ENOENT. Use d_is_negative() in both places.
- Drop the smp_mb()s in mntput_no_expire_slowpath() and do_umount()
that mnt_get_count()'s own barrier made redundant.
- fsnotify: a mark added while fsnotify_destroy_marks() walks the
connector could be missed and the connector detached, so an fdinfo
read called igrab(NULL). New marks are refused during teardown.
- pipe: a failed second fasync enable on an O_RDWR FIFO removed the
existing reader entry and cleared FASYNC while the writer entry
stayed, a use-after-free in send_sigio() later.
- watch_queue: post_one_notification() could see nr_notes before the
note pool behind it and dereference a NULL array. An unprivileged
user can trigger that with a key watch. Publish nr_notes last.
- pid_namespace: zap_pid_ns_processes() waits without bound for a
tracer outside the namespace to reap its zombies and neither wait was
freezable, so every suspend attempt failed.
- exit: is_child_subreaper and has_child_subreaper shared a word with
other bitfields written without a common lock, so racing prctl()s
lost a bit. They are separate bools now.
- autofs: a notification write that failed on a pipe the daemon had
already replaced put the superblock into catatonic mode again and
closed the replacement. Only do that for the current pipe.
- ovl: reject a lowerdir ending with an unescaped backslash with EINVAL
instead of a confusing ENOENT later.
- ocfs2/dlm: take dlm_reco_state_lock when the debugfs state file walks
the recovery participant list.
- samples/pidfd: fix the userprogs typo that kept pidfd-metadata from
being built.
* tag 'vfs-7.3-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits)
Revert "namei: don't reveal overmounted entries in refwalk"
selftests/filesystems: test that a mntns file can't take over a lock
fs: let idle threads share init_fs
namespace: a mount that copy_tree() leaves out can't take over a lock
namei: test for a negative dentry the way traverse_mounts() does
fs: pass flags to copy_fs()
ovl: reject lowerdir ending with unescaped backslash
fsnotify: prevent mark additions during connector teardown
pid_namespace: make zap_pid_ns_processes() freezable
fs: drop the smp_mb()s that mnt_get_count() made redundant
autofs: ignore notification errors from a replaced pipe
ntfs3: free replaced mount options after a grace period
ntfs3: free the sbi after a grace period
unicode: free the map after a grace period
ipc: drop the mqueue mount with kern_unmount() on setup failure
eventfs: free the eventfs_inode after an rcu grace period too
9p: free the session after a grace period
watch_queue: Fix note pool publication race in watch_queue_set_size()
afs: free the super info after a grace period
pipe: preserve existing fasync readers on writer setup failure
...
|
|
The locked_vm field in struct user_struct was originally introduced by
commit 789f90fcf6b0 ("perf_counter: per user mlock gift") to provide an
mlock-like budget for perf measured against mm->pinned_vm (since 2011).
perf grants each user a 'gift' of perf_event_mlock_kb * online CPUs of
buffer pages which is charged to user->locked_vm without any RLIMIT_MEMLOCK
check.
Only pages beyond the gift are checked against RLIMIT_MEMLOCK, per-mm, via
mm->pinned_vm, which makes it different from the standard mlock() check,
which is per-mm and made against RLIMIT_MEMLOCK.
However, since this was introduced, a number of other components have
utilised this field where a shared resource needed to be limited against
RLIMIT_MEMLOCK.
The other users are currently MSG_ZEROCOPY, io_uring, AF_XDP, iommufd,
s390 KVM zPCI and most recently, secretmem in commit 97d34aa65c29
("mm/secretmem: properly account locked pages").
This field is shared between all of these, but because the gift is not
checked against RLIMIT_MEMLOCK, user->locked_vm alone can exceed it - 16
CPUs * 516 KiB is already more than the default 8 MiB - after which every
other user of the field fails unconditionally.
This was reported by a user who saw secretmem failing while running a
simultaneous perf record.
Resolve the issue by simply giving perf its own field separate from the
rest.
BPF used user->locked_vm up until commit 80ee81e0403c ("bpf: Eliminate
rlimit-based memory accounting infra for bpf maps") which landed in 5.11.
Thus also eliminate the now-defunct ifdef for CONFIG_BPF_SYSCALL for
user->locked_vm.
This issue exists between all of the components which use user->locked_vm
and perf, however secretmem is the first user who has caused a report over
many years and has been backported, so target the fix at that.
Fixes: 97d34aa65c29 ("mm/secretmem: properly account locked pages")
Closes: https://lore.kernel.org/20261002175651.811343-1-ameer.hamza@truenas.com
Reported-by: Ameer Hamza <ameer.hamza@truenas.com>
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20261003-perf-locked-vm-fix-v1-1-d214dcaf0d76@kernel.org
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A revert for the blend mode property patch being applied twice and a
patch to reset the device when frozen in virtio, a power state fix for
vc4, a Kconfig fix for amdxdna, an error handling, reference counting,
and a null pointer dereference fix for rocket, a revert for dma-buf for
a commit introducing a dangling reference, a locking fix for exec, and a
fix for panthor to handle 10-core GPUs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/atCZfcTvshZx6mcA@houat
|
|
bsg-lib allocates a 96-byte (SCSI_SENSE_BUFFERSIZE) reply buffer per
job, but struct ufs_rpmb_reply is 104 bytes: a 40-byte struct
ufs_bsg_reply followed by a 64-byte EHS. When an Advanced RPMB command
returns an EHS, ufshcd_advanced_rpmb_req_handler() copies it right after
the 40-byte header and writes 8 bytes past the end of the buffer.
Let each BSG transport pass its reply buffer size to bsg_setup_queue()
and have ufs_bsg request sizeof(struct ufs_rpmb_reply), so the full
reply reaches user space. Other transports keep SCSI_SENSE_BUFFERSIZE.
Fixes: 6ff265fc5ef6 ("scsi: ufs: core: bsg: Add advanced RPMB support in ufs_bsg")
Cc: stable@vger.kernel.org
Signed-off-by: Stanley Jhu <stanleyjhu@google.com>
Link: https://patch.msgid.link/20261013132708.1669415-1-stanleyjhu@google.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Leave ANFE masked on Apple T2 Secure Enclave, which fixes spontaneous
poweroff regressions on MacBookPro16,1 and likely other models with
the T2 caused by new Advisory Non-Fatal Error support (Jason Perlow)
- Move dw-rockchip INTx IRQ setup from rockchip_pcie_host_init(), where
it runs after every reset, to the rockchip_pcie_probe() path to avoid
installing new IRQ handler (which causes INTx IRQs to be lost) and
leaking an IRQ domain on every reset; fixes a regression added this
cycle (Shawn Lin)
* tag 'pci-v7.3-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: dw-rockchip: Move INTx IRQ setup to probe
PCI/AER: Keep ANFE masked on Apple T2 Secure Enclave
|
|
fsnotify_destroy_marks() keeps a reference to its current mark while it
drops conn->lock to destroy the mark. This stabilizes the forward-walk
cursor, but does not prevent a new mark from being inserted before it.
For example, an inotify watch re-added after IN_IGNORED sorts before the
old, detached mark for the same group. The walk can miss the replacement
and then detach the entire connector from the object.
The replacement is still on its group's marks_list and, for inotify, in
the watch IDR. The group mutex no longer protects the connector's object
from disappearing. An unprivileged fdinfo read racing the final detach
can consequently call igrab(NULL):
BUG: KASAN: null-ptr-deref in igrab+0x24/0x100
Write of size 4 at addr 0000000000000148
Call Trace:
igrab+0x24/0x100
inotify_show_fdinfo+0x1dc/0x5e0
seq_show+0x397/0x690
Set a DESTROYING flag under conn->lock before starting the walk, and
reject new marks on that connector with -ENOENT. The existing add-mark
error paths undo the temporary group-list entry and the backend's watch
allocation. Do not wait for teardown while holding the group mutex,
which the destroyer needs. Once the old connector is detached, an add
can install a fresh connector as before.
This closes the insertion race for all object types using the common
connector teardown, without changing the mark reference or SRCU lifetime
rules.
Fixes: 6b3f05d24d35 ("fsnotify: Detach mark from object list when last reference is dropped")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
generic_ci_d_hash() and generic_ci_d_compare() read sb->s_encoding and
dereference the unicode map while a pathwalk in rcu mode holds nothing
but rcu_read_lock(). The filesystems that use them, ext4, f2fs and
tmpfs, drop the map with utf8_unload() from ->put_super(), which runs
when the last reference to the mount goes away. A lookup that is still
inside such a filesystem at that point reads a freed map.
With a pathwalk held up in utf8_casefold_hash() while the last reference
to a casefolded tmpfs goes away:
BUG: KASAN: slab-use-after-free in utf8nlookup+0x74c/0x950
Read of size 8 at addr ff110001030fe658 by task walker/98
Call Trace:
<TASK>
utf8nlookup+0x74c/0x950
utf8byte+0x160/0x1560
utf8_casefold_hash+0x167/0x230
generic_ci_d_hash+0xdd/0x1c0
link_path_walk+0x11ad/0x1d30
path_lookupat+0x63/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
[...]
Allocated by task 94:
__kmalloc_cache_noprof+0x249/0x560
utf8_load+0x4e/0x570
shmem_parse_opt_casefold.isra.0+0x92/0x270
[...]
Freed by task 97:
kfree+0x1db/0x5b0
shmem_put_super+0x72/0x170
generic_shutdown_super+0x14c/0x530
kill_anon_super+0x3a/0x60
deactivate_locked_super+0x9c/0xf0
cleanup_mnt+0x9f/0x130
So far that has been hard to hit. umount(2) waits for a grace period
in namespace_unlock() before it drops the mount, so only a mount whose
last reference goes away elsewhere, like the close of a file or a chdir
out of a lazily unmounted directory, can race a walker. So it is
reachable.
Delay the free until a grace period has passed. The map and the data
table it holds a reference to then outlive any pathwalk that found the
superblock before the mount went away. The reference on the data table
module is dropped from the rcu callback as well. utf8-core is built in
whenever CONFIG_UNICODE is set, so there is no module exit that would
have to wait for the callbacks.
Overlayfs points the s_encoding of an overlay at the map of its first
layer without taking a reference of its own. That stays correct. The
layer is held by the overlay, so its map is dropped only after the
overlay is gone.
Fixes: b886ee3e778e ("ext4: Support case-insensitive file name lookups")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20261009-work-fixes-rcu-v1-6-7446d2d335e6@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
is_child_subreaper, has_child_subreaper, autoreap and, with
CONFIG_POSIX_TIMERS=y, timer_create_restore_ids are 1-bit fields that
share one memory location in struct signal_struct. A store to any of
them is a read-modify-write of the whole word, and three of the stores
run without a common lock:
- PR_SET_CHILD_SUBREAPER writes me->signal->is_child_subreaper with
no lock held.
- propagate_has_child_subreaper(), run by walk_process_tree() from
the same prctl in an ancestor, writes p->signal->has_child_subreaper
of every descendant p under read_lock(&tasklist_lock), which does
not exclude the other writers.
- PR_TIMER_CREATE_RESTORE_IDS writes
current->signal->timer_create_restore_ids with no lock held.
When a process calls prctl(PR_SET_CHILD_SUBREAPER, 1) while an
ancestor's PR_SET_CHILD_SUBREAPER walk visits it, or while another
thread of the same process calls prctl(PR_TIMER_CREATE_RESTORE_IDS),
the read-modify-write sequences interleave and one of the bits is
silently lost:
- If has_child_subreaper is lost, the process's orphaned descendants
are reparented straight to init when it exits: find_new_reaper()
tests father->signal->has_child_subreaper first and never looks for
the ancestor subreaper. The service manager that registered as the
subreaper never gets SIGCHLD for them and cannot wait() on them.
- If is_child_subreaper is lost, the prctl returned 0 but the process
is not a subreaper: orphans of its descendants skip it and are
reparented to the next subreaper up or to init.
PR_GET_CHILD_SUBREAPER reads back 0.
- If timer_create_restore_ids is lost, the prctl returned 0 but
timer_create() does not restore the requested timer ids (or keeps
restoring them after _OFF), and _GET reads back the old value.
Documentation/memory-barriers.txt requires all fields of one bitfield
to be protected by one lock for exactly this reason. No lock is taken
or documented for these flags, and the prctls need no privilege, so any
process can hit the race against its own ancestors or descendants, or
between two of its own threads.
Make is_child_subreaper and has_child_subreaper separate bool members.
Each store then has its own memory location and no read-modify-write
of a neighbour. The readers and their locking are unchanged.
autoreap stays a bit-field and so shares a memory location only with
timer_create_restore_ids. That pair is race-free: autoreap is stored
exactly once, in copy_process() before the new signal_struct is
reachable by any other task, and timer_create_restore_ids is only
stored to the signal_struct of an already running process.
Fixes: 749860ce2427 ("prctl: propagate has_child_subreaper flag to every descendant")
Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu>
Link: https://patch.msgid.link/20261011123440.768054-1-nickolai@csail.mit.edu
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
On a desktop debug kernel (PROVE_LOCKING, KASAN, LOCKDEP_CHAINS_BITS=19)
lockdep switches itself off after about two days of uptime with
"BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!", and locking is not validated
until the next reboot. In the last such boot the pool ran out after 46.6
hours, and a fifth of it, 533509 of 2621431 chain hlocks in 63838 of
344717 chains, had been created by the deferred hrtimer rearm on return
from interrupt.
Make lockdep account that rearm as part of the timer interrupt it
belongs to.
Commit 15dd3a948855
("hrtimer: Push reprogramming timers into the interrupt return path")
moved the reprogramming of the clock event device out of the timer
interrupt into the interrupt return path. On return to kernel mode
irqentry_exit_to_kernel_mode_after_preempt() performs it after
irq_exit_rcu() has already left lockdep's hardirq context. lockdep
therefore records hrtimer_bases.lock and the timekeeper sequence count
as taken by the interrupted context, on top of the locks that context
holds, and every distinct held-lock stack an interrupt hits adds two
lock chains. When the rearm runs from irq_enter_rcu() or
__irq_exit_rcu() it is still inside lockdep's hardirq context, and there
the same acquisitions reuse one pair of chains.
The dependencies recorded on the return path are "lock held with
interrupts enabled -> hrtimer_bases.lock". Such a lock is hardirq-unsafe
and hrtimer_bases.lock is hardirq-safe, so a path in the reverse
direction is already reported by the irq-safety checks without these
edges.
Re-enter lockdep's hardirq context around the rearm on the kernel return
path. The return to user mode path holds no locks and is left alone, as
is the rearm in __schedule(), which runs under the runqueue lock.
With the same kernel tree, configuration and workload, one hour of
uptime including a full kernel build, the chains of this shape, with
hrtimer_bases.lock and optionally the timekeeper sequence count on top
of a held-lock stack outside the scheduler, go from 13266 (96187 chain
hlocks, 15.9% of those in use) to 4. Those 4 come from clock_was_set(),
which takes cpus_read_lock() and each CPU's hrtimer_bases.lock and reads
the clock under it.
Fixes: 15dd3a948855 ("hrtimer: Push reprogramming timers into the interrupt return path")
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20261013071318.33300-1-mikhail.v.gavrilov@gmail.com
|
|
A FUT_OFF_MMSHARED futex is a shared futex that refers to an MM.
It is possible for a process to wait on a shared futex with a different MM
because a FUT_OFF_INODE waiter can be requeued onto a FUT_OFF_MMSHARED
futex by another process.
This can cause FUT_OFF_MMSHARED waiters on a freed MM to consume
wakeups intended for a newly allocated MM at the same address.
Fix it by keying FUT_OFF_MMSHARED using a unique 64-bit per-MM ID.
Leave private futexes as before to avoid influencing the performance of the
hotpath.
(Multi-threaded processes typically implicitly use FUT_OFF_MMSHARED by
setting clear_child_tid such that it points into anonymous memory, which
causes mm_release() in a multi-threaded mm to perform FUTEX_WAKE.)
Fixes: 222993395ed3 ("futex: Remove pointless mmgrap() + mmdrop()")
Closes: https://lore.kernel.org/r/CAG48ez0dLBpc3QtbAhMMVNHwHL94iHh2G+h-=BVFR4dDuzZr1g@mail.gmail.com/
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260929-futex-mmshared-fix-v1-1-262b1ffeb3d0@google.com
Cc: stable@vger.kernel.org
|
|
When a contention is detected the drm_exec object grabs a reference to
the contended object, unlocks all other objects and pre-locks the
contended one before anything else.
The problem is that it is possible that this pre-locked object was about
to be destroyed and drm_exec is now holding the last reference to it.
So we never actually see this pre-locked object again to be explicitly
locked and so also never reserve a slot for a dma_fence object on it.
Should the driver now use drm_exec_for_each_locked_object() to add a new
fence to all locked objects we eventually see a warning or even a
BUG_ON() to prevent random memory corruption.
Fix this by keeping the prelocked object out of the array of locked objs
until it was explicitly mentioned by the driver again.
If the prelocked object is never mentioned again by the driver
just unlock and drop the reference at the end of the locking loop.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Fixes: 09593216bff1 ("drm: execution context for GEM buffers v7")
CC: stable@vger.kernel.org # v6.6+
Link: https://lore.kernel.org/r/20261007124657.9664-1-christian.koenig@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
"power-supply core:
- prevent unregistering a power supply while a callback runs
power-supply drivers:
- generic-adc-battery: Fix temperature IIO channel conversion
- ds2780: Fix ds2780_get_capacity() returning raw value
- max17042_battery: Fix vmin assigned instead of vmax in DT parsing
- Fix maintenance charge table kernel-doc"
* tag 'for-v7.3-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: core: prevent unregistering a power supply while a callback runs
power: supply: generic-adc-battery: Fix temperature IIO channel conversion
power: supply: ds2780: Fix ds2780_get_capacity() returning raw value
power: supply: Fix maintenance charge table kernel-doc
power: supply: max17042_battery: Fix vmin assigned instead of vmax in DT parsing
|
|
On systems with CONFIG_PROVE_RAW_LOCK_NESTING enabled, Apple GPIO probe
triggers an "Invalid wait context" lockdep warning.
The driver uses a regmap with a raw spinlock and REGCACHE_FLAT. During
regcache_init(), regcache_flat_init() allocates memory while holding the
raw spinlock. The memory allocator can acquire a non-raw spinlock, which
causes an invalid raw-to-non-raw lock nesting error. The abbreviated call
chain is:
apple_gpio_pinctrl_probe
regcache_init
regcache_flat_init
__kmalloc_noprof
__pcs_replace_empty_main
refill_objects
_raw_spin_lock_irqsave
Cache allocation occurs before the regmap is published, cache destruction
occurs after users have stopped accessing it, and regmap_reinit_cache()
requires callers to prevent concurrent access. Remove the outer map lock
from cache initialization and destruction. Keep it for cache population
and normal register access.
The Maple cache still uses its internal spinlock during teardown. That
lock can also be acquired from hard IRQ context during register access.
Add Maple-state irqsave helpers and use them during teardown to preserve
the lock's IRQ-safe lockdep state.
Fixes: fd4ebc07b4df ("regmap: Hold the regmap lock when allocating and freeing the cache")
Suggested-by: Mark Brown <broonie@kernel.org>
Suggested-by: Liam R. Howlett <liam@infradead.org>
Signed-off-by: Michael Reeves <michael.reeves077@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20261006-regcache-lifecycle-submit-v3-2-37bdd82fd47c@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit eddba19b8b5f ("PCI/AER: Support Advisory Non-Fatal Errors")
unmasks Advisory Non-Fatal Errors on devices which support Role-Based
Error Reporting. On a MacBookPro16,1, enabling ANFE on the Apple T2
Secure Enclave Processor [106b:1802] causes spontaneous power loss.
Leave the Secure Enclave's ANFE mask unchanged. Set a per-device flag
with an EARLY fixup, before pci_aer_init() can unmask ANFE; a FINAL fixup
would run too late. Keep the advertised RBER capability and all other
AER initialization and reporting unchanged. Other Apple T2 functions
and non-Apple devices retain the existing ANFE behavior.
Setting the flag repeatedly and skipping the ANFE unmask operation are
idempotent. The underlying device or firmware failure is not understood.
[bhelgaas: Aditya posted essentially the same patch soon after:
https://lore.kernel.org/all/20261010172301.12764-1-aditya.garg@linux.dev]
Fixes: eddba19b8b5f ("PCI/AER: Support Advisory Non-Fatal Errors")
Reported-by: Jason Perlow <jperlow@gmail.com>
Closes: https://lore.kernel.org/linux-pci/CABZrw2HcaOh3DHTJtxU5dXrb3Vg19scr6+qR-xe_+R7rME35_Q@mail.gmail.com/
Assisted-by: LLM
Signed-off-by: Jason Perlow <jperlow@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/CABZrw2H+3yt2Y7xiq6OyAWaJM7P9ox-2nJxoQuJMwoJHLgi+YQ@mail.gmail.com/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe fixes via Keith:
- Fix swapped ZRASF zone state values for full and read only
- nvme-multipath revalidate head zones after unfreezing the head
queue
- Revert "nvme: do not reset controllers in NVME_CTRL_NEW state",
which broke things
- nvmet fixes for invalid NSIDs on feature 82h and using the local
P2P device on metadata allocation failure
- zloop: zero out only the unread tail of a short read
* tag 'block-7.3-20261010' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
Revert "nvme: do not reset controllers in NVME_CTRL_NEW state"
zloop: zero out only the unread tail of short reads
nvmet: use the local P2P device on metadata allocation failure
nvme-multipath: revalidate head zones after unfreezing the head queue
nvme: fix swapped ZRASF zone state values for full and read only
nvmet: return Invalid Field for invalid NSIDs feature 82h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Don't spin on local work the exiting task can't run.
For a ring still R_DISABLED when the task got its tctx node, the
submitter is set later and may be another task, so DEFER_TASKRUN
local work stays pending forever and the exiting task spins in
do_exit().
- Don't charge the SQ/CQ rings or provided buffer rings to
RLIMIT_MEMLOCK. The region API conversion started charging them,
which the rings had been exempt from.
- Don't exempt disabled rings from task restrictions on register
- Populate the CONNECT filter fields for a 24-byte sockaddr_in6
* tag 'io_uring-7.3-20261010' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/cancel: don't spin on local work the task can't run
io_uring/net: populate CONNECT filter fields for 24-byte sockaddr_in6
io_uring/register: don't exempt disabled rings from task restrictions
io_uring/kbuf: don't charge provided buffer rings to RLIMIT_MEMLOCK
io_uring: do not charge the SQ/CQ rings to RLIMIT_MEMLOCK
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A dozen of small fixes. All device-specific quirks or fixes, and
nothing exciting is expected.
- USB-audio and HD-audio quirks
- HD-audio TAS2781 codec fix
- ctxfi driver memory leak fix
- ASoC AMD quirks
- ASoC cs35l56 and adau1372 codec fixes"
* tag 'sound-7.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: amd: acp: Add more ACP7.0 match entries for Cirrus Logic parts
ASoC: amd: acp: Add DMI override for ASUS EXPERTBOOK AM7406CKA
ASoC: sdw_utils: Switch CS35L56/57/62/63 to use OT25 DAI
ASoC: cs35l56: Add DAI for SDCA OT25 stream
ASoC: samsung: i2s: enable op_clk in probe to balance runtime PM
ASoC: adau1372: fix invalid default state of output ASRC and DAC muxes
ASoC: adau1372: allow sleepy powerdown GPIOs
ASoC: amd: yc: Add DMI quirk for Acer Aspire Go 15 (AG15-21P)
ALSA: hda/realtek: Add mute LED quirk for HP Pavilion 15-eg3xxx (103c:8bfd)
ALSA: hda/tas2781: Accept V1 calibration data without CRC
ALSA: ctxfi: Fix memory leakage when clearing DAO input mappers
ALSA: hda/realtek: Add quirk for ASRock NUC BOX-358H
ALSA: usb-audio: Add native DSD support for Cambridge Audio streamers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains fixes for the current development cycle.
All of them came out of a review of the mount code that started with a
bug report. The review modeled the corner cases of mount propagation,
unmounting and mount reference counting and turned up a lot of bugs.
Most of them years old. Most fixes come with a selftest.
- Rework connected mounts.
A mount that is unmounted together with its parent can stay
attached to the parent to keep its mountpoint covered. That happens
when the mountpoint is removed with rmdir(), unlink() or rename(),
when a detached tree is dissolved, and for locked mounts in any
umount that isn't synchronous, including the teardown of their
mount namespace. The parent then owns the child and drops it on its
own final mntput(). So any reference from the child's superblock
back to one of its ancestors becomes a cycle that is never freed.
A loop device backed by an image on a tmpfs and mounted on that
same tmpfs is enough. Remove the directory the tmpfs is mounted on
from the host, let the container's mount namespace exit, and the
loop device, the tmpfs and the filesystem on the loop device are
leaked for good. The same works with autofs, zram, ecryptfs,
binfmt_misc, fuse passthrough, zloop, a mass storage gadget and md,
and the selftests have reproducers for them. This has been possible
since v4.1. It is also why "put_mnt_ns(): leave mounts connected"
was reverted in -rc5. Keeping every mount of a dying mount
namespace connected made these cycles trivial to create.
Every unmounted mount is now detached from its parent. Where the
mountpoint has to stay covered the mount leaves a cover on the
parent instead, allocated together with the mount. A lookup on the
unmounted parent that hits a cover finds an empty immutable
directory or file on the private nullfs instance. Nothing leads
from a cover to another mount, so no unmounted mount owns another
one and no cycle can form.
This is visible to userspace. A formerly connected mount can no
longer be reached through its unmounted parent and ".." inside it
leads nowhere, as for every other lazily unmounted mount.
With that the private nullfs instance becomes reachable from
userspace, so it now refuses mounts on top, is mounted read-only,
and refuses fsnotify marks and file locks. Its inodes are shared by
every holder and a watch or a lock would otherwise reach across
users. may_decode_fh() now also decides its subtree check under a
single mount_lock hold, as a racing umount could otherwise let it
decode into what a locked child covered.
- umount:
* Don't silently unmount busy mounts.
Since v4.13 propagate_umount() takes down propagated copies of
the victim with children as long as each child is an overmount or
another copy of the victim, but propagate_mount_busy() only ever
checked copies without children or with just an overmount. A
container that moved a tree beneath its copy of a host mount lost
that tree from under its open file descriptor to a plain umount()
on the host. propagate_mount_busy() now applies the same rules,
walking each chain of copies once.
* Don't let a migrating task hide its reference from umount().
mnt_get_count() sums the per-cpu counters under mount_lock but
the mntget() and mntput() fast paths don't take it. A task that
takes a reference on a cpu the sum has already passed and drops
it after migrating to one the sum hasn't reached yet hides the
reference it held to begin with, and umount() succeeds with the
file still open. Gets and puts now live in separate per-cpu
counters and all puts are summed before all gets with a full
barrier in between, the way srcu_readers_active_idx_check() does
it. mntget() is unchanged and mntput() gains an smp_wmb().
* Check each submount for references right before unmounting it.
shrink_submounts() and mark_mounts_for_expiry() checked all their
victims up front. Unmounting the first could move a busy
overmount to where the next victim's propagated copy is looked up
and it was then unmounted without a check.
* Never expire a locked mount.
A shrinkable mount moved beneath a locked mount with
MOVE_MOUNT_BENEATH takes over the lock, and umount() of an
unlocked ancestor expired it and revealed what it covered. That
umount() now fails with EBUSY as it does for any other locked
child. A lazy umount still takes the whole tree.
- Overmounts and locked mounts:
* Unhash a dentry before detaching the mounts on it.
unlink(), rmdir() and rename() detach the mounts on the victim
but only d_delete() it once its inode is unlocked, a window that
includes an expedited RCU grace period. In between, a lookup from
a mount namespace in which the dentry is a mountpoint found it
hashed, positive and uncovered. Drop the dentry first, as
d_invalidate() already does.
* Don't reveal overmounted entries in refwalk.
A refwalk that had grabbed the dentry before the unlink never
rechecked it the way rcuwalk does with d_seq and mount_lock.
Without any artificial widening three walkers read the covered
file 27 times in a minute. step_into() now fails an unhashed
dentry marked DCACHE_CANT_MOUNT with -ESTALE and the walk is
retried.
* Keep covered mounts covered in OPEN_TREE_NAMESPACE.
Creating such a mount namespace only takes a user namespace and
the copy followed bind mount rules: no children without
AT_RECURSIVE and no unbindable mounts with it. An unprivileged
user could see what mounts covered in the source, such as the
parts of /proc and /sys that container runtimes mask. If the
caller doesn't own the source mount namespace a non-recursive
copy of a mount with something mounted below the requested
directory is now refused and a recursive copy includes unbindable
mounts, the way unshare() copies.
* Keep the lock on a mount that a propagated copy is moved beneath.
MNT_LOCKED moved to any mount that ended up beneath a locked
mount, propagated copies included. A host mount and umount on a
directory covered by a locked mount in a less privileged mount
namespace left that cover unlocked for the namespace's owner to
remove. Only mounts the caller places beneath take over the lock
now.
* Handle mount locking for automounts correctly. Which copies to
lock was decided by the mount namespace of the task that
triggered the automount. A task in a user namespace that
triggered one on a host mount through a file descriptor got the
host's own automount locked while its own copy stayed unlocked
and could have nosuid, nodev and noexec cleared. Use the owner of
the mount namespace the mount lands in.
- Use-after-free and crashes:
* Refuse an automount below a mount that is in no namespace.
The private clones overlayfs uses for its layers have the
MNT_NS_INTERNAL error pointer as their namespace, which
finish_automount() let through and count_mounts() dereferenced. A
fanotify filesystem mark on an overlayfs lower layer hands out
file descriptors on such a clone. With debugfs as the lower layer
opening "tracing" oopses with namespace_sem held for writing and
every mount operation on the system blocks from then on.
* Reset the old parent's ->overmount in mnt_change_mountpoint().
When propagate_umount() moved an overmount off a mount that a
file descriptor kept alive, MOVE_MOUNT_BENEATH through that
descriptor later followed the stale pointer into the freed
overmount.
* statmount() with STATMOUNT_BY_FD and pivot_root() read the parent
of a mount that may be unmounted and only held by a file
descriptor, while the parent's final mntput() can free it.
statmount() now reads it under mount_lock and pivot_root() first
checks that both mounts are in the caller's mount namespace.
* Queue a mount only once for mount notifications. A mount
reparented by one umount_tree() and taken down by the next under
the same namespace_sem hold, as in shrink_submounts(), was queued
twice. That cut the mounts queued in between out of notify_list
while it still pointed at them, and once they were freed every
later mount operation walked freed memory.
* Don't let a pseudo dentry become the root of a mount. A bind
mount of a bpf token file did that with a DCACHE_NORCU dentry,
which is freed without an RCU grace period while lockless path
walks may still look at it. Refuse to clone such a mount.
* Don't inherit MNT_UMOUNT in clone_mnt(). A bind mount of a lazily
unmounted nsfs or pidfs mount through its file descriptor started
out flagged as unmounted. Among other things __detach_mounts()
then dropped the namespace's reference on it, the mount outlived
its namespace and mount_setattr() through the descriptor read the
freed namespace. A recursive bind mount of such a mount also
copied the unmounted stack still attached to it. That now fails
with EINVAL, copying the mount itself still works.
* Remove the fsnotify marks of a mount namespace in free_mnt_ns()
instead of the RCU callback that frees the namespace, where
taking the group mutexes meant sleeping in softirq context.
- Propagation and copies:
* Keep a copied mount unbindable. Since v6.17 clone_mnt() didn't
copy the unbindable flag, so every mount namespace created with
CLONE_NEWNS had bindable copies of all unbindable mounts. This
had been fixed once before.
* Refuse MOVE_MOUNT_SET_GROUP on an unbindable mount. It made the
mount an unbindable slave, a state nothing else can produce, or
silently dropped the unbindable flag. CRIU applies MS_UNBINDABLE
after restoring sharing and isn't affected.
* Check a recursive bind mount for mount namespace loops.
Recursively bind mounting a tree from another mount namespace
could put a mount of a namespace's file inside that same
namespace, which then pins itself and all its mounts. Repeating
it leaks without limit, the reproducer took Shmem from 380 kB to
65916 kB. The copy is now checked with check_for_nsfs_mounts()
before it is grafted, as move_mount() does.
* Look at the topmost mount for a mount namespace file.
attach_recursive_mnt() never looked at the topmost mount of the
source's chain of overmounts. If that was the chain's only mount
namespace file an existing mount at a propagated destination got
buried below the root of the nsfs file where no path walk reaches
it.
* Don't put a mountpoint on a dentry that's being removed.
attach_recursive_mnt() makes a mountpoint of the source's root
without its inode lock, so a racing rmdir() of that directory
could leave a mount on it that nothing ever detaches.
d_set_mounted() now checks cant_mount() as well.
- nullfs:
* Take no inode lock for readdir of an immutable directory.
The root of every empty mount namespace is the same nullfs
directory and iterate_dir() held its i_rwsem across
->iterate_shared(). A reader whose buffer faults on a FUSE mount
of its own holds it for as long as its server wants, and with an
exclusive locker queued behind it every lookup that misses the
dcache, every create and every mount in that directory waits. One
user of an empty mount namespace stalls all others. Directories
with the new FOP_IMMUTABLE flag skip the lock.
* Refuse to reconfigure internal superblocks through fspick(),
MS_REMOUNT or the read-only remount that a synchronous umount()
of the root does. For nullfs only root in the initial user
namespace could do it, but the superblock is shared by every
mount namespace and the flags showed up in statfs() for all of
them.
* Don't update the access time on nullfs and refuse F_SET_RW_HINT
on an immutable inode.
- unshare: Free an nsproxy that was never installed with
nsproxy_free() when set_cred_ucounts() fails. put_nsproxy() dropped
active references that were never taken, which triggered a warning
and hid the caller's own namespaces from listns().
- Smaller changes: mount_setattr() checks the target before it walks
the tree to allocate peer group ids, unshare() puts the old
fs_struct before the old namespaces, dissolve_on_fput() drops the
file's reference to the tree itself, disconnect_mount() is
simplified and the documentation of the propagated unmount rule is
brought up to date"
* tag 'vfs-7.3-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (58 commits)
namespace: simplify disconnect_mount()
selftests/filesystems: test covered mounts
namespace: rework connected mounts
nullfs: add an empty immutable regular file
selftests/filesystems: check that reading the root of an empty mount namespace stalls nobody
selftests/filesystems: add a helper that holds a readdir in a page fault
readdir: take no inode lock on an immutable directory
nullfs: refuse file locks
fsnotify: let a filesystem refuse marks on its objects
namespace: nothing is mounted on or written through knullfs
namespace: keep the private nullfs instance in knullfs
fhandle: decide the subtree check under mount_lock
selftests/filesystems: check that an automount below an overlay layer is refused
selftests/filesystems: check the atime of the empty mount namespace root
selftests/filesystems: check that a lock lands on the right mount and stays
namespace: keep the lock on a mount that a propagated copy is moved beneath
namespace: never expire a locked mount
nullfs: don't update the access time
namespace: handle mount locking for automounts correctly
namespace: refuse an automount below a mount that is in no namespace
...
|
|
A ring created with IORING_SETUP_R_DISABLED is exempt from its register
restrictions until it is enabled. This lets the creator register the
restrictions and then enable the ring with IORING_REGISTER_ENABLE_RINGS,
whether or not that opcode is in the allowed set.
Since commit ed82f35b926b ("io_uring: allow registration of per-task
restrictions"), a ring also inherits restrictions from the task that
creates it, and the same exemption applies to those. A task whose
register opcodes are restricted can therefore create a disabled ring,
issue any register opcode on it, and then enable it.
Mark rings whose restrictions were inherited from the task, and keep
checking register opcodes for them while the ring is disabled. Enabling
such a ring now requires IORING_REGISTER_ENABLE_RINGS to be in the
task's allowed set. Per-ring restrictions registered on a disabled ring
work as before.
Fixes: ed82f35b926b ("io_uring: allow registration of per-task restrictions")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Eugene Gvozdetsky <gvozdet@gmail.com>
Link: https://patch.msgid.link/20261009-iouring-task-restrict-fix-v1-1-a49daf55a12c@gmail.com
[axboe: amend with inheritance flag fixup]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, wireguard, CAN and Bluetooth.
We have one known regression to wrap up in VLAN handling.
Current release - regressions:
- Bluetooth: RFCOMM: fix deadlock on rfcomm_mutex
Previous releases - regressions:
- can: fix regression in handling RPS after migrating metadata to skb_ext
- eth:
- iavf: fix regressions in reconfig impacting bonding
- mana: fix packet forwarding performance regression
- stmmac: remove buggy VLAN acceleration support
Previous releases - always broken:
- a few high prio fixes for tun, and af_packet
- amt: fix a UaF on tunnel teardown
- eth:
- bnxt: fix PCIe AER recovery and FLR handling issues
- macb: don't modify Tx skbs before taking ownership
- axienet: don't leak Tx skbs on interface stop
- wifi:
- nxpwifi: number of LLM-ish fixes
- assorted mt76 fixes"
* tag 'net-7.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (128 commits)
net: macb: copy shared skbs before appending the FCS
net: macb: check TX ring before modifying skb
vsock: Fix memory leak in vmci_transport_recv_dgram_cb()
wireguard: noise: reject response consumption after intermediate initiation
wireguard: queueing: preserve tstamp_type when encapsulating packet
net: openvswitch: validate transport header presence in set_ipv6_addr
net/smc: protect clcsock lifetime in smc_getname
ipv6: do not warn on route notification size race
ipv4: do not warn on route notification size race
ipv4: validate checksum_start before completing checksum
ptp: ocp: fix PCIe delay estimation calculation
xen/netfront: don't leak the skb when xennet_fill_frags() fails
net/packet: call packet_parse_headers after virtio_net_hdr_to_skb
xen/netfront: drop RX packets with a short Ethernet header
net: skbuff: don't leave stale bytes in skb_copy_and_csum_bits()
net: sparx5: free the matchall entry on destroy
selftests: mlxsw: Test port range occupancy on template create
mlxsw: spectrum_flower: Fix port range register leak in tmplt_create()
net: dsa: microchip: fix KSZ8765 fiber detection
net/mlx5e: Order ICOSQ cc update after CQ doorbell
...
|
|
If a packet with bad checksum metadata gets into the ipv4 stack,
skb_checksum_help can corrupt the network header and cause a bunch of
mischief.
This was discovered and reported by Paulos, and has been reporoduced
by others independently since.
We really shouldn't allow such packets in, but as a defence
in depth measure, let's also check before we complete the checksum.
A more complete validation at input is forthcoming, but needs more work.
Cc: stable@vger.kernel.org
Fixes: f43798c27684 ("tun: Allow GSO using virtio_net_hdr")
Fixes: bfd5f4a3d605 ("packet: Add GSO/csum offload support.")
Reported-by: Paulos Yibelo <habte.yibelo@gmail.com>
Closes: https://lore.kernel.org/netdev/20260922030310.8684-2-habte.yibelo@gmail.com/
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/0a012b4923e189c4c593ef4f471e5ff0edbe9030.1791412497.git.mst@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 730ff06d3f5c ("net: mana: Use page pool fragments for RX buffers
instead of full pages to improve memory efficiency.") started handing
out RX buffers with zero headroom so that two buffers fit into one page
at the default MTU.
The MANA TX path, however, stores the per scatter-gather entry DMA
mappings in `struct mana_skb_head` at skb->head, and mana_start_xmit()
therefore calls skb_cow_head(skb, MANA_HEADROOM). The port advertises
this requirement as ndev->needed_headroom = MANA_HEADROOM.
As a result every packet that is received and then forwarded out of a
MANA port fails the skb_cow() in ip_forward() and gets reallocated and
copied by pskb_expand_head(). This is invisible to a plain RX or TX
workload, but it puts a full skb reallocation plus memcpy on the hot
path of every single forwarded packet, which is exactly what a
router/NVA workload does.
Restore the headroom. Note that reserving MANA_HEADROOM (232) is not
enough: ip_forward() asks for LL_RESERVED_SPACE(dev), which rounds
hard_header_len + needed_headroom up to HH_DATA_MOD and is 256 bytes on
ethernet. Use LL_RESERVED_SPACE() directly so the value keeps tracking
both constants. Also, since LL_RESERVED_SPACE() tracks MANA_HEADROOM,
it grows with MAX_SKB_FRAGS and for MAX_SKB_FRAGS >= 19 it is greater
than 256, so we have to account for that by using the headroom the RX
queue actually uses (instead of assuming XDP_PACKET_HEADROOM) and
turning MANA_XDP_MTU_MAX into MANA_XDP_MTU_MAX(ndev) (note that at the
default CONFIG_MAX_SKB_FRAGS=17 they are equivalent).
At the default MTU on a 4K page this means a buffer no longer fits twice
into a page (SKB_DATA_ALIGN(1500 + MANA_RXBUF_PAD + 256) = 2112), so the
frag-vs-single decision is now made by computing the real buffer size
instead of comparing the MTU against PAGE_SIZE / 2. The page_pool
fragment path is still used wherever at least two buffers genuinely fit,
e.g. on 16K and 64K page sizes.
Measured on an Azure VM with a MANA NIC acting as a forwarding NVA (UDP,
1400 byte payload, 4 streams, 8 Gbps offered, only the forwarding
node's kernel differs), 8 runs each, median:
forwarded pps throughput
before 272,830 3.06 Gbps
after 390,560 4.37 Gbps (+43%)
perf on the forwarding node, same workload:
memset_orig __pi_memcpy pskb_expand_head
before 10.07% 3.96% present
after 0.94% 0.64% gone
Cc: stable@vger.kernel.org
Fixes: 730ff06d3f5c ("net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency.")
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20261003013647.2051416-1-hamzamahfooz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a DAI for the SDCA OT25 stream on SoundWire DP4.
The SDCA-defined OT25 stream is an amp reference feedback, typically used
for AEC. The firmware outputs this on DP4. The firmware owns all control
registers for this stream so there are no mixer controls or any other
configuration options.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20261005155235.1386525-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The comment above strp_done() claims that if strp is stopped,
strp_recv will no longer be called. That's only true if the caller has
a mechanism (eg locking) to guarantee that strp_recv() calls that
started before strp_stop() have completed by the time we call
strp_done().
This adds a dummy lock_sock/release_sock pair to guarantee that any
in-flight strp_recv() (which runs under either bh_lock_sock or
lock_sock, depending if it's called from ->sk_data_ready or strp_work)
has completed.
Only espintcp can be affected by this race condition, but this patch
makes sure no future user of strp can have the bug.
This could crash on strp->sk ("general mode" of strp), but this mode
has been here for 9 years and has never been used. It'll be gone soon,
no point worrying about it.
Switch the stopped/paused/etc bits to u8's to avoid races between
strp_stop() and strp_pause/unpause().
A reproducer has been published and turns the possible UAF into an
exploit [1].
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Link: https://lore.kernel.org/all/aZLn2Faeg1FB7XOf@v4bel/
Link: https://lore.kernel.org/all/aZgpkyTDU3aXe_V0@v4bel/
Link: https://github.com/m0x41nos/RustyTux [1]
Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)")
Cc: stable@vger.kernel.org
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Hyunwoo Kim <imv4bel@gmail.com>
Link: https://patch.msgid.link/425d9d926709b542ed5331110c19fee4aee1f28d.1791206940.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-10-01
The first patch is by zjamg and restores the skb header initialization
lost during the v7.0 release cycle.
Oliver Hartkopp contributes a patch for the CAN net layer to fix the
unique skb identifier regression under RPS, introduced in the v7.0
release cycle, which causes lost packets.
The last patch is by Ji-Ze Hong and fixes a struct size mismatch in
the f81604 CAN driver, which results in a TX starvation.
* tag 'linux-can-fixes-for-7.3-20261001' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
usb: f81604: fix struct f81604_int_data size mismatch
can: fix unique skb identifier regression under RPS
can: dev: init_can_skb(): restore skb header initialization
====================
Link: https://patch.msgid.link/20261001151905.1556270-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
Core:
- hci_sync: Fix command skb lifetime during scan setup
- hci_sock: Serialize dead-device detachment
- RFCOMM: free the skb when the DLC has no owner
- RFCOMM: connect the session socket without rfcomm_mutex
- RFCOMM: Fix NULL tty_dev dereference in rfcomm_dev_shutdown
- SCO: serialise sco_conn lifetime against sco_recv_scodata()
- ISO: Reject concurrent BIS listener setup
- ISO: Serialize concurrent connect calls
- MGMT: Fix status of pending commands flushed on power off
Driver:
- btintel_pcie: fix TX descriptor bounds check
- btintel_pcie: use managed IRQ teardown
- btintel_pcie: Add shared HW reset for clean start
* tag 'for-net-2026-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: ISO: Serialize concurrent connect calls
Bluetooth: ISO: Reject concurrent BIS listener setup
Bluetooth: hci_sync: Fix command skb lifetime during scan setup
Bluetooth: hci_sock: Serialize dead-device detachment
Bluetooth: RFCOMM: Fix NULL tty_dev dereference in rfcomm_dev_shutdown
Bluetooth: btintel_pcie: use managed IRQ teardown
Bluetooth: MGMT: Fix status of pending commands flushed on power off
Bluetooth: btintel_pcie: Add shared HW reset for clean start
Bluetooth: RFCOMM: connect the session socket without rfcomm_mutex
Bluetooth: btintel_pcie: fix TX descriptor bounds check
Bluetooth: SCO: serialise sco_conn lifetime against sco_recv_scodata()
Bluetooth: RFCOMM: free the skb when the DLC has no owner
====================
Link: https://patch.msgid.link/20261005194436.3594085-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Taking a CPU offline could hang, or stall until the watchdog ejected
the BPF scheduler, when tasks on the dying CPU were still held by the
scheduler or sitting on a user dispatch queue. Re-enqueue them onto
the local queue when the runqueue goes offline so that the CPU pushes
them off like the other sched classes.
- The sequence number guarding against stale dispatches was per
runqueue, so a task re-enqueued on another CPU could get the same
number and a dispatch meant for its earlier instance was applied to
the new one. Use a per-task counter.
- A task dispatched to another CPU's local queue got its ops.dequeue()
only when picked to run and flagged as a core-sched pick. Call it at
insertion like for same-CPU dispatches.
* tag 'sched_ext-for-7.3-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Generate qseq from a per-task counter
selftests/sched_ext: Add a test for ops.dequeue() on remote local DSQ moves
sched_ext: Call ops.dequeue() when a task arrives on a remote local DSQ
sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler
|
|
Commit 9e8db5913264 ("net: avoid false positives in untrusted gso
validation") added a '&& skb->network_header' check before flow-dissecting
GSO packets without VIRTIO_NET_HDR_F_NEEDS_CSUM in
__virtio_net_hdr_to_skb(), because some callers (such as tun_get_user(),
tun_xdp_one(), virtnet_receive_done(), and raw_verify_header()) called
virtio_net_hdr_*_to_skb() before initializing skb->network_header and
skb->dev.
Because __alloc_skb() and __build_skb_around() zero-initialize
skb->network_header to 0 (unlike mac_header and transport_header which
are initialized to ~0U), those four callers always had
skb->network_header == 0 and bypassed flow dissection in
__virtio_net_hdr_to_skb(). More generally, skb->network_header is an
offset from skb->head (where 0 is also a valid offset whenever
skb_headroom(skb) is 0), not a boolean flag.
Whenever the 'if (gso_type && skb->network_header)' branch was skipped,
the fallback 'else if (gso_type)' only pulled nh_min_len + thlen (40 bytes
for TCPv4) without dissecting the packet, without validating ip_proto or
n_proto, and without setting skb->transport_header.
If the packet has a malformed network header, it is not rejected and a
subsequent skb_probe_transport_header() also fails, leaving
skb->transport_header at ~0U (0xffff). Similarly, if an IPv4 packet
carries IP options (ihl > 5) or an IPv6 packet carries extension headers,
pulling only nh_min_len + thlen can leave the TCP header outside
skb->head. In both cases, tcp_hdrlen(skb) in skb_gso_transport_seglen()
reads out-of-bounds:
BUG: KASAN: slab-out-of-bounds in skb_gso_transport_seglen
Read of size 2 by task poc/133
skb_gso_transport_seglen (net/core/gso.c:155)
skb_gso_validate_mac_len (net/core/gso.c:270)
tbf_enqueue (net/sched/sch_tbf.c:260)
dev_qdisc_enqueue (net/core/dev.c:4227)
__dev_queue_xmit (net/core/dev.c:4884)
In addition, checking virtio_net_hdr_match_proto() only inside
'if (!skb->protocol)' before flow dissection both skipped validation when
skb->protocol was pre-set by the caller and rejected VLAN-tagged frames
whose outer L2 protocol is ETH_P_8021Q or ETH_P_8021AD.
Fix this by:
1. Initializing skb->dev and skb->network_header (plus skb->protocol for
IFF_TUN) before virtio_net_hdr_*_to_skb() in tun_get_user(),
tun_xdp_one(), virtnet_receive_done(), and raw_verify_header(). In
tun_get_user(), drop the redundant skb_reset_mac_header(skb) in the
IFF_TUN case since __virtio_net_hdr_to_skb() unconditionally resets
mac_header.
2. Removing '&& skb->network_header' and the unvalidated
'else if (gso_type)' fallback in __virtio_net_hdr_to_skb() so all GSO
packets without VIRTIO_NET_HDR_F_NEEDS_CSUM are flow-dissected, have
their transport header pulled into linear data, and have
skb->transport_header set.
3. Moving the virtio_net_hdr_match_proto() check to after
skb_flow_dissect_flow_keys_basic(), validating keys.basic.n_proto
against hdr_gso_type.
Fixes: 9e8db5913264 ("net: avoid false positives in untrusted gso validation")
Fixes: d5be7f632bad ("net: validate untrusted gso packets without csum offload")
Fixes: 924a9bc362a5 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Closes: https://lore.kernel.org/netdev/20260927163117.746432-2-bestswngs@gmail.com/
Signed-off-by: Eric Dumazet <edumazet@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20261001191140.2818991-3-edumazet@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
- Allow using Braille console with a serial console driver converted
to NBCON API
* tag 'printk-for-7.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
braille: nbcon: Allow to use a serial console with NBCON API as Braille console
|
|
Once a power supply is registered, its callbacks can immediately start
firing from other contexts, such as external_power_changed() triggered by
the TCPM stack. If a power supply is unregistered while the callback is
still running, the driver data can already be freed when the callback
tries to access it, leading to a use-after-free.
This happens e.g. when the hardware bus carrying the power supply device
malfunctions (e.g. I2C is hogged down by another malfunctioning device)
immediately after the power supply is registered, and thus the core is
still processing the callbacks which were queued up when the driver
starts the removal, leading in some cases to a kernel crash, e.g.:
[ 11.645942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000005
[ 11.646751] Mem abort info:
[ 11.647006] ESR = 0x0000000096000004
[ 11.647338] EC = 0x25: DABT (current EL), IL = 32 bits
[ 11.647806] SET = 0, FnV = 0
[ 11.648077] EA = 0, S1PTW = 0
[ 11.648356] FSC = 0x04: level 0 translation fault
[ 11.648785] Data abort info:
[ 11.649041] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 11.649524] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 11.649981] GCS = 0, Overlay = 0, DirtyBit = 0
[ 11.650390] [0000000000000005] user address but active_mm is swapper
[ 11.650955] Internal error: Oops: 0000000096000004 [#1] SMP
[ 11.651460] Modules linked in:
[ 11.651742] CPU: 1 UID: 0 PID: 144 Comm: kworker/1:2 Not tainted 7.2.0-rc6-g62a9297af2cd #1 PREEMPT
[ 11.652553] Hardware name: Flipper One rev. F0B1C2 (DT)
[ 11.653024] Workqueue: events power_supply_changed_work
[ 11.653511] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 11.654135] pc : __power_supply_is_supplied_by+0x18/0x100
[ 11.654624] lr : __power_supply_am_i_supplied+0x40/0xb8
[ 11.655098] sp : ffff80008192bb30
[ 11.655399] x29: ffff80008192bb30 x28: 0000000000000000 x27: 0000000000000000
[ 11.656049] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 11.656695] x23: ffff0000c19f4200 x22: ffffdb2232ba4ea8 x21: ffff80008192bc28
[ 11.657344] x20: ffff0000c1eef000 x19: ffff80008192bc18 x18: 00000000a0886e62
[ 11.657991] x17: 000000040044ffff x16: 04500072b5503510 x15: 0000000000000000
[ 11.658639] x14: 0000000000000000 x13: 0000000000000220 x12: 0000000000000000
[ 11.659286] x11: 0000000000000000 x10: ffff0000c1fdb2b0 x9 : ffffdb2232ba5590
[ 11.659934] x8 : 00000000e5b906e6 x7 : ffff0000c2502778 x6 : ffffdb22339793d0
[ 11.660581] x5 : ffff80008192bc18 x4 : ffff0000c19cbca0 x3 : 0000000000000000
[ 11.661228] x2 : ffff0000c1fdaf40 x1 : ffffffffffffffed x0 : ffff0000c1eef000
[ 11.661878] Call trace:
[ 11.662103] __power_supply_is_supplied_by+0x18/0x100 (P)
[ 11.662596] __power_supply_am_i_supplied+0x40/0xb8
[ 11.663040] psy_for_each_psy_cb+0x20/0x40
[ 11.663416] class_for_each_device+0x110/0x150
[ 11.663825] power_supply_am_i_supplied+0x68/0x100
[ 11.664262] bq257xx_external_power_changed+0x58/0x140
[ 11.664733] __power_supply_changed_work+0x60/0x80
[ 11.665170] psy_for_each_psy_cb+0x20/0x40
[ 11.665545] class_for_each_device+0x110/0x150
[ 11.665953] power_supply_changed_work+0x98/0x1b8
[ 11.666382] process_one_work+0x164/0x4c0
[ 11.666758] worker_thread+0x19c/0x320
[ 11.667104] kthread+0x138/0x150
[ 11.667408] ret_from_fork+0x10/0x20
[ 11.667744] Code: d503233f a9bd7bfd 910003fd a90153f3 (f9400c34)
[ 11.668294] ---[ end trace 0000000000000000 ]---
Add a read-write semaphore between external_power_changed() and
power_supply_unregister() to prevent the latter from returning (and thus
the driver from freeing its data) while the callback is still running.
Fixes: bc1540561c9e ("power_supply: Add API for safe access of power supply function attrs")
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260910-bq257xx-init-v3-1-4e219a1a04a5@flipper.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
- Fix task work flags management regression in the hrtimer
rearming code that can leave task work items unprocessed
(Karl Mehltretter)
* tag 'timers-urgent-2026-10-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Use the mask to clear TIF_HRTIMER_REARM from the exit work
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix race between perf_event_exit_task() and perf_pending_task()
(Luo Gengkun)
- Fix perf header output management regressions (Ian Rogers)
- Require kernel access for text poke events (Zhengchuan Liang)
* tag 'perf-urgent-2026-10-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Require kernel access for text poke events
perf: Replace perf_event_header__init_id with full header init
perf: Fix race between perf_event_exit_task() and perf_pending_task()
|
|
iterate_dir() takes the directory's i_rwsem shared and holds it across
->iterate_shared(). For a directory that never has an entry and is
never removed the lock keeps nothing still, it only orders every reader
and every writer of that inode behind each other.
For the directory of a nullfs instance that matters. The instance of
the initial mount namespace is the root of every empty mount namespace
and the private instance is the root of every kernel thread, so one
inode is shared across users who have nothing else in common. And a
reader can hold the lock for as long as it likes: back the getdents()
buffer with a mapping of a file on a FUSE mount of your own, let the
copy of "." and ".." fault and let the server wait. Queue an exclusive
taker behind it, a mkdir() in that directory goes through start_dirop()
before the read-only mount is reported, and from then on every lookup
that misses the dcache in that directory, every create and every mount
on it waits until the server answers. One user of an empty mount
namespace stalls all the others.
Add FOP_IMMUTABLE for the file operations of a directory that never
changes and is never removed and let iterate_dir() skip the lock for
it. The flag never changes for a file, ->f_pos is protected by
f_pos_lock since directories are FMODE_ATOMIC_POS, IS_DEADDIR can't be
set on such a directory and neither touch_atime() nor fsnotify take
i_rwsem. Set it on the nullfs directory. The placeholder directories of
libfs never have an entry either but their owners remove them, so they
keep the lock.
Fixes: 9d4e752a24f7 ("namespace: allow creating empty mount namespaces")
Cc: stable@vger.kernel.org # v7.1+
Link: https://patch.msgid.link/20261002-work-mount-fixes-4-v1-19-dd44b89d44ce@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Don't let nullfs be watched. fanotify refuses mount and filesystem marks
on SB_NOUSER superblocks but inode marks of inotify, fanotify and
dnotify go through. The one inode of knullfs is the root of every
kernel thread and the following patches make it reachable from
userspace as the directory that stands in for an unmounted mount. A
watch placed through one such directory would report the opens through
all the others, across users.
Add FS_DISALLOW_NOTIFY next to FS_DISALLOW_NOTIFY_PERM, refuse a mark on
any object of such a filesystem in fsnotify_add_mark_list() where every
backend ends up and set it for nullfs. There's nothing to watch on a
permanently empty and immutable filesystem.
Link: https://patch.msgid.link/20261002-work-mount-fixes-4-v1-16-dd44b89d44ce@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
finish_dispatch() uses the qseq embedded in p->scx.ops_state to tell
whether the QUEUED instance of a task it's about to claim is the one
scx_bpf_dsq_insert() saw. qseq is generated from rq->scx.ops_qseq, but
the counters of different rqs are independent, so if a task is dequeued
and re-enqueued on a different rq between scx_bpf_dsq_insert() and
finish_dispatch(), the new QUEUED instance can end up with the same
qseq as the old one:
CPU X CPU Z
----- -----
enqueue p on rq A, qseq = N
ops.dispatch()
scx_bpf_dsq_insert(p)
records qseq N
sched_setaffinity(p)
dequeue p from rq A
enqueue p on rq B, qseq = N
finish_dispatch(p, N)
qseq matches, p is claimed
The claim itself is still atomic so the core stays consistent, but an
insert issued for a previous QUEUED instance gets applied to a new one
which the BPF scheduler has just received through ops.enqueue(). This
breaks the guarantee that dispatches targeting a stale instance are
ignored.
Generate qseq from a per-task counter, p->scx.ops_qseq, instead so that
consecutive QUEUED instances of a task never share a qseq regardless of
which rq they're on. The counter is only updated in
scx_do_enqueue_task() with the task's rq locked, so no additional
synchronization is needed, and it fits in an existing hole in struct
sched_ext_entity on 64bit. Remove the now unused rq->scx.ops_qseq.
Never generate qseq 0. NONE and DISPATCHING don't carry a qseq, so
scx_bpf_dsq_insert() on a task in either state records 0. With a
per-task counter, every task's first QUEUED instance would otherwise get
qseq 0 and could be claimed by such an insert. Wrap the counter where
the QSEQ field wraps so that it can't reach a value that shifts to 0 on
32bit either.
Fixes: f0e1a0643a59 ("sched_ext: Implement BPF extensible scheduler class")
Cc: stable@vger.kernel.org # v6.12+
Assisted-by: Claude:claude-opus-5.5
Signed-off-by: Kuba Piecuch <jpiecuch@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial driver fixes for 7.3-rc6. Nothing major
here, just lots of small fixes for reported issues, some of them very
long-standing:
- tty hangup fixes that have been there since the BKL days and kept
tripping people up over time.
- vt selection bugfix
- other vt bugfixes (memory leaks and screen update fixes)
- n_gsm bugfix
- qcom-geni serial driver bugfix
- 8250 serial driver bugfixes
- other tiny serial driver fixes
All of these have been in linux-next, the last few only a few days but
testing here seems solid (this pull request was generated on that
tree)"
* tag 'tty-7.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits)
tty: add missing driver flag kernel-doc colon
vt: selection: Fix unsigned underflow and slab-out-of-bounds read in paste_selection()
vt: skip screen update for DEC alignment test on backgroup consoles
vc_screen: reload vc pointer before if (ret) in vcs_write() to avoid UAF
serial: sc16is7xx: reduce TX refill rate with half-FIFO trigger
serial: sc16is7xx: refill TX FIFO below trigger using fresh TXLVL
serial: tegra: don't clear the Tx FIFO on an Rx-only reset
serial: sc16is7xx: fix TX gap caused by kfifo circular buffer wrap-around
tty: fix saved termios reset race
tty: serial: mpc52xx_uart: move static declarations up.
tty: serial: max3100: shut down timer before freeing port
tty: add break_wait kernel-doc
serial: qcom-geni: keep registered console runtime active
serial: qcom-geni: Fix unbalanced runtime PM resume for no_console_suspend
serial: qcom-geni: avoid unused-function warning
tty: serial: qcom_geni_serial: Keep console RX functional after deep idle
soc: qcom: geni-se: Correct QUP Core ICC vote constants
serial: 8250_bcm7271: fix use-after-free in brcmuart_remove()
serial: vt8500: Fix clock reference leak in vt8500_serial_probe()
kgdboc: Fix tty driver reference leak in configure_kgdboc()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here is a big set of USB and Thunderbolt driver fixes for 7.3-rc6.
They were delayed on my side due to conference travel, not the fault
of the submitters at all. Included in here are:
- lots of small thunderbolt fixes for reported issues due to more
testing and devices and a few reverts as well based on that work
- more usb-serial device ids added
- usb-serial and cdc-acm driver hangup and other fixes
- dwc3 driver fixes for reported problems
- lots of usb gadget driver fixes as people again fuzz these drivers
and send in fixes, which is nice to finally see
- typec driver fixes for reported problems
- octeon-hcd driver fixes for reported problems
- more usb-storage quirks added
- other small USB driver bugs resolved for reported problems
All of these have been in linux-next without any reported issues"
* tag 'usb-7.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (63 commits)
usb: dwc3: gadget: fix IRQ storm on invalid event buffer count
Revert "usb: dwc3: gadget: fix IRQ storm on invalid event buffer count"
USB: gadget: dummy-hcd: Fix wait for outstanding request completions
usb: typec: port-mapper: Only match USB4 port if host interface is available
usb: cdns3: Fix NULL pointer dereference in cdns3_pci_probe
usb: dwc3: gadget: fix IRQ storm on invalid event buffer count
usb: typec: ucsi: Get the connector fwnode based on reg value
usb: gadget: f_uac1_legacy: validate bRequest index in generic_{set,get}_cmd
usb: core: clear both ep_in and ep_out for non-ep0 control endpoints
USB: cdc-acm: skip URB restart in port_shutdown if disconnected
usb: gadget: f_fs: Fix NULL pointer dereference in FUNCTIONFS_ENDPOINT_DESC
usb: gadget: aspeed-vhub: cancel wake work on device removal
thunderbolt: Disable CL states for the Anker Prime TB5 dock
thunderbolt: stream: Announce support for FMODE_NOWAIT
usb: typec: ucsi: displayport: Current CAM OOB index fixup
usb: ohci-st: disable controller wakeup on removal
usb: ohci-spear: disable controller wakeup on removal
usb: ohci-s3c2410: disable controller wakeup on removal
usb: ohci-da8xx: disable controller wakeup on cleanup
usb: cdns3: fix use-after-free in cdns3_gadget_exit()
...
|
|
The Zone Management Receive command Zone Receive Action Specific (ZRASF)
reporting option values for the Full and Read Only zone states are swapped
compared to the NVM Express Zoned Namespace Command Set Specification,
Revision 1.5, Figure 35:
- 5h lists the zones in the ZSF:Full state.
- 6h lists the zones in the ZSRO:Read Only state.
The nvmet ZNS backend uses these constants to map the ZRASF value received
from the host to a block layer zone condition when filtering zones in
Report Zones. Because of the swap, a host asking for full zones was given
the read only zones, and a host asking for read only zones was given the
full zones.
Swap the values of NVME_ZRASF_ZONE_STATE_FULL and
NVME_ZRASF_ZONE_STATE_READONLY to match the specification.
Fixes: aaf2e048af27 ("nvmet: add ZBD over ZNS backend support")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Karl Bonde Torp <k.torp@samsung.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Pull smb client fixes from Paulo Alcantara:
"Fix a series of data corruption and I/O error bugs found by running
generic/363 (fsx) in a loop against Windows Server 2022 and Samba.
- Stop data dirtied past EOF through an mmap from reappearing as file
content once the file is extended by a write, truncate, zero range,
copy range or clone range
- Flush dirty data and drain in-flight I/O before operations that
assume the pagecache and the server agree on the file: querying
allocated ranges, the O_TRUNC open, interior zero range, and
server-side copy/clone
- Stop a genuine size-extending zero range or preallocate from being
refused with -EOPNOTSUPP when the inode is not read caching, by
querying the server's authoritative EOF instead of trusting a stale
cached i_size
- Zero the untransferred tail of a short read, both in the netfs
read-gaps path (where stale folio content could otherwise be
written back to the server) and in the DIO/unbuffered read
collector, and tell a real EOF apart from a stale cached
remote_i_size after a lease downgrade
- Require stable pages on signed connections so a buffered write
can't modify a folio whose signature has already been computed and
is in flight, which the server rejected with STATUS_ACCESS_DENIED
and the client surfaced as -EIO
- Split several cifsFileInfo flags out of a shared bitfield byte so
concurrent updates taken under different locks no longer clobber
each other through a byte-level RMW"
* tag 'cifs-fixes-7.3-rc6' of https://git.manguebit.org/linux:
smb: client: split cifsFileInfo bitfields to avoid shared-byte RMW races
smb: client: require stable pages for signed connections
smb: client: distinguish real EOF from a stale remote_i_size on read
netfs: zero the tail of a short DIO/unbuffered read
smb: client: only require read lease for size-extending preallocate
netfs: zero gaps in read-gaps folio to avoid writing back stale data
smb: client: only require read lease for size-extending zero range
smb: client: drain and invalidate before server-side copy/clone
smb: client: flush dirty data before zeroing a range
smb: client: drain outstanding I/O before truncating on O_TRUNC open
smb: client: flush and commit data before querying allocated ranges
smb: client: discard post-EOF pagecache when extending a file via clone range
smb: client: discard post-EOF pagecache when extending a file via copy range
smb: client: discard post-EOF pagecache when extending a file via zero range
smb: client: clear post-EOF pagecache when extending a file via truncate
netfs: clear post-EOF pagecache when extending a file via write
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix overflow of backward jump offset in constant blinding
(Alexei Starovoitov)
- Fix packet range of packet pointers sharing an id when var_off
tightens umax of one pointer and not the other (Alexei Starovoitov)
- Fix objects stuck in free_by_rcu_ttrace list of bpf memalloc
(Alexei Starovoitov)
- Fix use-after-free of progs detached from busy trampolines: wait for
an RCU tasks grace period before freeing trampoline progs, and patch
detached progs out of trampoline images that are still in use
(Florent Revest)
- Hold map BTF for the memory allocator destructor record to fix UAF in
deferred bpf_mem_alloc destruction (Kumar Kartikeya Dwivedi)
- Fix missing migration protection in resizable hashtab
lookup_and_delete batch operation (Ömer Mete Kaya)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix missing migration protection in __rhtab_map_lookup_and_delete_batch()
selftests/bpf: Add a test for objects stuck in free_by_rcu_ttrace
bpf: Fix objects stuck in free_by_rcu_ttrace
bpf: Factor out __do_call_rcu_ttrace()
selftests/bpf: Test packet range of pointers sharing an id
bpf: Fix packet range of pointers sharing an id
selftests/bpf: Detach a trampoline prog while a task sleeps before it
bpf: Skip detached progs in trampoline images that are still in use
bpf: Wait for an RCU tasks grace period before freeing trampoline progs
bpf: Hold map BTF for the memory allocator destructor record
bpf: Fix overflow of jump offset in constant blinding
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A fair amount of small fixes, which became much larger as a pile of
pending homework during my vacation in the last weeks.
The majority of changes are device-specific quirks and ASoC updates,
along with a few ALSA core fixes and USB-audio hardening as well as a
few regression fixes.
ALSA Core:
- Serialize ALSA sequencer compat port-info ioctls
HD-audio:
- Fix ALC235 codec headset handling
- Fix regression on Tegra194 controller support
- Quirks / fixes for Lenovo, ASUS, Acer, Dell, Higole, HP, and IPASON
laptops
USB-audio:
- Hardening for line6 and ua101 drivers to deal with malformed
packets
- Fix input device leak on probe error in caiaq driver
- Apply quirks generically for Audient and Behringer devices
- Quirks for ASUS SupremeFX Hi-Fi, HiBy FC4 (native DSD), and MSI MAG
B850M MORTAR WIFI
ASoC:
- Runtime PM fixes for SDCA class function driver
- Fix uninitialized stream configs in RT1017 and MAX98363 SDW codecs
- AMD ACP SoundWire support for ASUS and Lenovo models
- Quirks for Intel machines (Lenovo Yoga Slim 7, Chuwi Hi8)
- Qualcomm LPASS fixes for playback constraints and WSA macro volume
- Codec / platform fixes for rt274/rt286, cs42l43, wm8903, Tegra ASRC
Misc:
- Regression fix for silent playback on Creative Titanium HD
- Error handling fix at probe via auto-cleanup in ice1712"
* tag 'sound-7.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (53 commits)
spi: cs42l43: Workaround for wrong speaker ID on Dell XPS 13 DX13260
ALSA: ice1712: Fix the error handling via auto-cleanup at probe
ALSA: core: Define auto-cleanup for snd_card_free()
ALSA: hda/realtek: Add ALC235 support for headset mode
ALSA: hda/realtek: Add micmute LED quirk for Acer Swift SFG16-72
ALSA: hda/realtek: Fix mute and micmute LEDs on HP ENVY x360 15-ey0xxx
ALSA: hda/realtek: Add mute LED quirk for HP Pavilion 14-dv1001TU
ALSA: ctxfi: Fix silent playback on Titanium HD (SB1270)
ALSA: usb-audio: Apply IGNORE_CTL_ERROR quirk to all Audient devices
ALSA: usb-audio: Apply boot quirk for Behringer models generically
ASoC: codecs: lpass-wsa-macro: rewrite the interpolator volume after enabling clocks
ALSA: hda/realtek: Fix speakers on ASUS PM3406CHA
ALSA: hda/realtek: Add quirk for HP Pavilion AiO 24 speaker
ALSA: hda/realtek: Add mute LED quirk for HP Laptop 15-fd2xxx
ASoC: amd: acp-config: Add ACP70 DMI quirk for ASUS UM5406GA
ALSA: hda/realtek: Add mute LED quirks for HP Pavilion 15-eh3174nw and HP Laptop 15-dw1xxx
ASoC: Intel: Add quirk to block match table for Lenovo Yoga Slim 7
ALSA: hda/realtek: Add mute LED quirk for HP Victus 15-fb2xxx
ALSA: hda/realtek: Add quirk for Acer Nitro AN515-45
ALSA: hda/realtek: Add quirk for Lenovo ThinkBook G8+
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- VMGENID memory needs to be mapped with the decrypted tag, so that
SEV-SNP machines can boot
- A fix for an initialization race in VMGENID, followed by a cleanup
- Trivial kernel doc cleanups in siphash and random.c
- A fix for a new compilation failure with recent clang on PPC and
RISC-V, due to generating an out-of-line memset in the vDSO
* tag 'random-7.3-rc6-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: vDSO: avoid call to memset() when zeroing reserved parameter
random: fix vgetrandom_opaque_params kernel-doc
random: vDSO: fix repeated word 'to' in comment
siphash: clean up kernel-doc comments
virt: vmgenid: move to using dev_set/get_drvdata
virt: vmgenid: set driver_data before registering notification handlers
virt: vmgenid: remap memory as decrypted
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.3
A bigger collection of fixes than usual due to your vacation but nothing
hugely remarkable here, just fairly standard quirks and driver specific
bugfixes.
|
|
A recent change adding a new TTY driver flag left out a colon required
for well-formed kernel-doc.
Fixes: 8df07fe93573 ("tty: fix saved termios reset race")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/ec3a09d6-4ba4-41b8-abb1-b59e265f4532@infradead.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20261002072736.2063004-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Braille console is not registered in console_list. Instead, it is
integrated with the virtual terminal (VT) and shows what is displayed
on the terminal. It writes the data using con->write*() callback
of the associated serial console driver.
braille_write() is called from the VT code under console_lock().
The associated serial console driver can be converted to the NBCON API
though. The situation is similar to flushing nbcon consoles in the legacy
loop when some boot consoles are still registered, see
nbcon_legacy_emit_next_record().
But there is a big difference though. braille_write() is not directly
called from the code paths flushing registered consoles. The VT code
expects that braille_write() succeeds. It does not replay the message
when it can't acquire the ownership. As a result, braille_write():
+ must try harder to get the ownership.
+ has to be synchronized only against non-printk serial console
which depend nbcon_device_try_acquire() using NBCON_PRIO_NORMAL.
Let's look at it from another side and try to simulate the original
locking using the NBCON API:
1. Take con->device_lock(), aka the port->lock in the legacy serial
console driver.
2. Acquire nbcon context to provide some synchronization for a panic()
context. Use NBCON_PRIO_NORMAL because it contends only with
nbcon_device_try_acquire() users. Do it in a busy loop. It should
always succeed when con->device_lock() succeeded because all other
users do the same. The only exception is when the context get acquired
by a CPU handling panic.
3. In panic, disable interrupts and try to acquire the nbcon context.
Use NBCON_PRIO_PANIC. And try even an unsafe takeover because
otherwise the Braille console won't see the text shown during panic().
It is similar to the oops_in_progress/trylock handling in the legacy
serial console driver.
Finally, avoid the newline prepending logic in the existing serial console
drivers when they are used as a Braille console. As explained above,
the Braille console shows the last modified line on the terminal (VT).
braille_write() is called when single characters are added. Most
messages are not ended by newline. Anyway, the VT code does not have
logic to reply partially printed messages.
Fixes: 13189fa73afa ("printk: nbcon: Rely on kthreads for normal operation")
Reviewed-by: John Ogness <john.ogness@linutronix.de>
[pmladek@suse.com: Remove white space changes in braille_register_console(). Typo fix.]
Link: https://patch.msgid.link/20261001140727.124398-2-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
