| Age | Commit message (Collapse) | Author |
|---|
|
Add a new netlink attribute to expose fractional frequency offset value
for a pin. Add an op to get the value from the driver.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://lore.kernel.org/r/20240103132838.1501801-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()")
0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL")
https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
We haven't accumulated much over the break. If it wasn't for the
uninterrupted stream of fixes for Intel drivers this PR would be very
slim. There was a handful of user reports, however, either they stood
out because of the lower traffic or users have had more time to test
over the break. The ones which are v6.7-relevant should be wrapped up.
Current release - regressions:
- Revert "net: ipv6/addrconf: clamp preferred_lft to the minimum
required", it caused issues on networks where routers send prefixes
with preferred_lft=0
- wifi:
- iwlwifi: pcie: don't synchronize IRQs from IRQ, prevent deadlock
- mac80211: fix re-adding debugfs entries during reconfiguration
Current release - new code bugs:
- tcp: print AO/MD5 messages only if there are any keys
Previous releases - regressions:
- virtio_net: fix missing dma unmap for resize, prevent OOM
Previous releases - always broken:
- mptcp: prevent tcp diag from closing listener subflows
- nf_tables:
- set transport header offset for egress hook, fix IPv4 mangling
- skip set commit for deleted/destroyed sets, avoid double deactivation
- nat: make sure action is set for all ct states, fix openvswitch
matching on ICMP packets in related state
- eth: mlxbf_gige: fix receive hang under heavy traffic
- eth: r8169: fix PCI error on system resume for RTL8168FP
- net: add missing getsockopt(SO_TIMESTAMPING_NEW) and cmsg handling"
* tag 'net-6.7-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
net/tcp: Only produce AO/MD5 logs if there are any keys
net: Implement missing SO_TIMESTAMPING_NEW cmsg support
bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()
net: ravb: Wait for operating mode to be applied
asix: Add check for usbnet_get_endpoints
octeontx2-af: Re-enable MAC TX in otx2_stop processing
octeontx2-af: Always configure NIX TX link credits based on max frame size
net/smc: fix invalid link access in dumping SMC-R connections
net/qla3xxx: fix potential memleak in ql_alloc_buffer_queues
virtio_net: fix missing dma unmap for resize
igc: Fix hicredit calculation
ice: fix Get link status data length
i40e: Restore VF MSI-X state during PCI reset
i40e: fix use-after-free in i40e_aqc_add_filters()
net: Save and restore msg_namelen in sock_sendmsg
netfilter: nft_immediate: drop chain reference counter on error
netfilter: nf_nat: fix action not being set for all ct states
net: bcmgenet: Fix FCS generation for fragmented skbuffs
mptcp: prevent tcp diag from closing listener subflows
MAINTAINERS: add Geliang as reviewer for MPTCP
...
|
|
This reverts commit 32bb4515e34469975abc936deb0a116c4a445817.
This reverts commit d078d480639a4f3b5fc2d56247afa38e0956483a.
This reverts commit fcc4b105caa4b844bf043375bf799c20a9c99db1.
This reverts commit 345237dbc1bdbb274c9fb9ec38976261ff4a40b8.
This reverts commit 7db69ec9cfb8b4ab50420262631fb2d1908b25bf.
This reverts commit 95132a018f00f5dad38bdcfd4180d1af955d46f6.
This reverts commit 63d5eaf35ac36cad00cfb3809d794ef0078c822b.
This reverts commit c29451aefcb42359905d18678de38e52eccb3bb5.
This reverts commit 2ab0edb505faa9ac90dee1732571390f074e8113.
This reverts commit dedd702a35793ab462fce4c737eeba0badf9718e.
This reverts commit 034fcc210349b873ece7356905be5c6ca11eef2a.
This reverts commit 9c5625f559ad6fe9f6f733c11475bf470e637d34.
This reverts commit 02018c544ef113e980a2349eba89003d6f399d22.
Looks like we need more time for reviews, and incremental
changes will be hard to make sense of. So revert.
Link: https://lore.kernel.org/all/ZZP6FV5sXEf+xd58@shell.armlinux.org.uk/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move phylink_pcs_neg_mode() from the header file into the .c file since
nothing should be using it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
xdp_prog is used in receive path, both from XDP enabled drivers
and from netif_elide_gro().
This patch also removes two 4-bytes holes.
Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240102162220.750823-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit cff9c565e65f3622e8dc1dcc21c1520a083dff35.
Revert based on feedback from Russell.
Link: https://lore.kernel.org/all/ZZPtUIRerqTI2%2Fyh@shell.armlinux.org.uk/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the @phy_timer: line to prevent the kernel-doc warning:
include/linux/phy.h:768: warning: Excess struct member 'phy_timer' description in 'phy_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: netdev@vger.kernel.org
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.8
The third "new features" pull request for v6.8. This is a smaller one
to clear up our tree before the break and nothing really noteworthy
this time.
Major changes:
stack
* cfg80211: introduce cfg80211_ssid_eq() for SSID matching
* cfg80211: support P2P operation on DFS channels
* mac80211: allow 64-bit radiotap timestamps
iwlwifi
* AX210: allow concurrent P2P operation on DFS channels
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev->gso_partial_features is read from tx fast path for GSO packets.
Move it to appropriate section to avoid a cache line miss.
Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Knowing the bus name is helpful when we want to expose the link topology
to userspace, add a helper to return the SFP bus name.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are a few PHY drivers that can handle SFP modules through their
sfp_upstream_ops. Introduce Phylib helpers to keep track of connected
SFP PHYs in a netdevice's namespace, by adding the SFP PHY to the
upstream PHY's netdev's namespace.
By doing so, these SFP PHYs can be enumerated and exposed to users,
which will be able to use their capabilities.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pass the phy_device as a parameter to the sfp upstream .disconnect_phy
operation. This is preparatory work to help track phy devices across
a net_device's link.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.
With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.
The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.
Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.
The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.
This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.
The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next-for-netdev
The following pull-request contains BPF updates for your *net-next* tree.
We've added 22 non-merge commits during the last 3 day(s) which contain
a total of 23 files changed, 652 insertions(+), 431 deletions(-).
The main changes are:
1) Add verifier support for annotating user's global BPF subprogram arguments
with few commonly requested annotations for a better developer experience,
from Andrii Nakryiko.
These tags are:
- Ability to annotate a special PTR_TO_CTX argument
- Ability to annotate a generic PTR_TO_MEM as non-NULL
2) Support BPF verifier tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like, from
Menglong Dong.
3) Fix a warning in bpf_mem_cache's check_obj_size() as reported by LKP, from Hou Tao.
4) Re-support uid/gid options when mounting bpffs which had to be reverted with
the prior token series revert to avoid conflicts, from Daniel Borkmann.
5) Fix a libbpf NULL pointer dereference in bpf_object__collect_prog_relos() found
from fuzzing the library with malformed ELF files, from Mingyi Zhang.
6) Skip DWARF sections in libbpf's linker sanity check given compiler options to
generate compressed debug sections can trigger a rejection due to misalignment,
from Alyssa Ross.
7) Fix an unnecessary use of the comma operator in BPF verifier, from Simon Horman.
8) Fix format specifier for unsigned long values in cpustat sample, from Colin Ian King.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The __of_mdiobus_register() function was storing the device node in
dev.of_node without increasing its reference count. It implicitly relied
on the caller to maintain the allocated node until the mdiobus was
unregistered.
Now, __of_mdiobus_register() will acquire the node before assigning it,
and of_mdiobus_unregister_callback() will be called at the end of
mdio_unregister().
Drivers can now release the node immediately after MDIO registration.
Some of them are already doing that even before this patch.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct optimistic_spin_node is private to the implementation.
Move it into the C file to ensure nothing is accessing it.
Signed-off-by: David Laight <david.laight@aculab.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-12-20
mlx5 Socket direct support and management PF profile.
Tariq Says:
===========
Support Socket-Direct multi-dev netdev
This series adds support for combining multiple devices (PFs) of the
same port under one netdev instance. Passing traffic through different
devices belonging to different NUMA sockets saves cross-numa traffic and
allows apps running on the same netdev from different numas to still
feel a sense of proximity to the device and achieve improved
performance.
We achieve this by grouping PFs together, and creating the netdev only
once all group members are probed. Symmetrically, we destroy the netdev
once any of the PFs is removed.
The channels are distributed between all devices, a proper configuration
would utilize the correct close numa when working on a certain app/cpu.
We pick one device to be a primary (leader), and it fills a special
role. The other devices (secondaries) are disconnected from the network
in the chip level (set to silent mode). All RX/TX traffic is steered
through the primary to/from the secondaries.
Currently, we limit the support to PFs only, and up to two devices
(sockets).
===========
Armen Says:
===========
Management PF support and module integration
This patch rolls out comprehensive support for the Management Physical
Function (MGMT PF) within the mlx5 driver. It involves updating the
mlx5 interface header to introduce necessary definitions for MGMT PF
and adding a new management PF netdev profile, which will allow the host
side to communicate with the embedded linux on Blue-field devices.
===========
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull block fixes from Jens Axboe:
"Fix for a badly numbered flag, and a regression fix for the badblocks
updates from this merge window"
* tag 'block-6.7-2023-12-29' of git://git.kernel.dk/linux:
block: renumber QUEUE_FLAG_HW_WC
badblocks: avoid checking invalid range in badblocks_check()
|
|
The kerneldoc comment for struct ethtool_fec_stats attempts to describe the
"total" and "lanes" fields of the ethtool_fec_stat substructure in a way
leading to these warnings:
./include/linux/ethtool.h:424: warning: Excess struct member 'lane' description in 'ethtool_fec_stats'
./include/linux/ethtool.h:424: warning: Excess struct member 'total' description in 'ethtool_fec_stats'
Reformat the comment to retain the information while eliminating the
warnings.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Revive proper alignment for the ksymtab and kcrctab sections
- Fix gen_compile_commands.py tool to resolve symbolic links
- Fix symbolic links to installed debug VDSO files
- Update MAINTAINERS
* tag 'kbuild-fixes-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
linux/export: Ensure natural alignment of kcrctab array
kbuild: fix build ID symlinks to installed debug VDSO files
gen_compile_commands.py: fix path resolve with symlinks in it
MAINTAINERS: Add scripts/clang-tools to Kbuild section
linux/export: Fix alignment for 64-bit ksymtab entries
|
|
The ___kcrctab section holds an array of 32-bit CRC values.
Add a .balign 4 to tell the linker the correct memory alignment.
Fixes: f3304ecd7f06 ("linux/export: use inline assembler to populate symbol CRCs")
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Rename dsa_realloc_skb to skb_ensure_writable_head_tail and move it to
skbuff.c to use it as helper.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The System EID (SEID) is an internal EID that is used by the SMCv2
software stack that has a predefined and constant value representing
the s390 physical machine that the OS is executing on. So it should
be managed by SMC stack instead of ISM driver and be consistent for
all ISMv2 device (including virtual ISM devices) on s390 architecture.
Suggested-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-and-tested-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For the QUEUE_FLAG_HW_WC to actually work, it needs to have a separate
number from QUEUE_FLAG_FUA, doh.
Fixes: 43c9835b144c ("block: don't allow enabling a cache on devices that don't support it")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231226081524.180289-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are a small number of various driver fixes for 6.7-rc7 that
normally come through the char-misc tree, and one debugfs fix as well.
Included in here are:
- iio and hid sensor driver fixes for a number of small things
- interconnect driver fixes
- brcm_nvmem driver fixes
- debugfs fix for previous fix
- guard() definition in device.h so that many subsystems can start
using it for 6.8-rc1 (requested by Dan Williams to make future
merges easier)
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
debugfs: initialize cancellations earlier
Revert "iio: hid-sensor-als: Add light color temperature support"
Revert "iio: hid-sensor-als: Add light chromaticity support"
nvmem: brcm_nvram: store a copy of NVRAM content
dt-bindings: nvmem: mxs-ocotp: Document fsl,ocotp
driver core: Add a guard() definition for the device_lock()
interconnect: qcom: icc-rpm: Fix peak rate calculation
iio: adc: MCP3564: fix hardware identification logic
iio: adc: MCP3564: fix calib_bias and calib_scale range checks
iio: adc: meson: add separate config for axg SoC family
iio: adc: imx93: add four channels for imx93 adc
iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()
interconnect: qcom: sm8250: Enable sync_state
iio: triggered-buffer: prevent possible freeing of wrong buffer
iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw
iio: imu: adis16475: use bit numbers in assign_bit()
iio: imu: adis16475: add spi_device_id table
iio: tmag5273: fix temperature offset
interconnect: Treat xlate() returning NULL node as an error
iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table
...
|
|
An alignment of 4 bytes is wrong for 64-bit platforms which don't define
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS (which then store 64-bit pointers).
Fix their alignment to 8 bytes.
Fixes: ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Remove documentation for nonexistent structure members, addressing these
warnings:
./include/linux/skbuff.h:1063: warning: Excess struct member 'sp' description in 'sk_buff'
./include/linux/skbuff.h:1063: warning: Excess struct member 'nf_bridge' description in 'sk_buff'
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
intel: use bitfield operations
Jesse Brandeburg says:
After repeatedly getting review comments on new patches, and sporadic
patches to fix parts of our drivers, we should just convert the Intel code
to use FIELD_PREP() and FIELD_GET(). It's then "common" in the code and
hopefully future change-sets will see the context and do-the-right-thing.
This conversion was done with a coccinelle script which is mentioned in the
commit messages. Generally there were only a couple conversions that were
"undone" after the automatic changes because they tried to convert a
non-contiguous mask.
Patch 1 is required at the beginning of this series to fix a "forever"
issue in the e1000e driver that fails the compilation test after conversion
because the shift / mask was out of range.
The second patch just adds all the new #includes in one go.
The patch titled: "ice: fix pre-shifted bit usage" is needed to allow the
use of the FIELD_* macros and fix up the unexpected "shifts included"
defines found while creating this series.
The rest are the conversion to use FIELD_PREP()/FIELD_GET(), and the
occasional leXX_{get,set,encode}_bits() call, as suggested by Alex.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
23c93c3b6275 ("bnxt_en: do not map packet buffers twice")
6d1add95536b ("bnxt_en: Modify TX ring indexing logic.")
tools/testing/selftests/net/Makefile
2258b666482d ("selftests: add vlan hw filter tests")
a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
UHB AP send supported power type(LPI, SP, VLP)
in beacon and probe response IE and STA should
connect to these AP only if their regulatory support
the AP power type.
Beacon/Probe response are reported to userspace
with reason "STA regulatory not supporting to connect to AP
based on transmitted power type" and it should
not connect to AP.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.cbfbef9170a9.I432f78438de18aa9f5c9006be12e41dc34cc47c5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"Improve the interaction of arbitrary lookups in the AFS dynamic root
that hit DNS lookup failures [1] where kafs behaves differently from
openafs and causes some applications to fail that aren't expecting
that. Further, negative DNS results aren't getting removed and are
causing failures to persist.
- Always delete unused (particularly negative) dentries as soon as
possible so that they don't prevent future lookups from retrying.
- Fix the handling of new-style negative DNS lookups in ->lookup() to
make them return ENOENT so that userspace doesn't get confused when
stat succeeds but the following open on the looked up file then
fails.
- Fix key handling so that DNS lookup results are reclaimed almost as
soon as they expire rather than sitting round either forever or for
an additional 5 mins beyond a set expiry time returning
EKEYEXPIRED. They persist for 1s as /bin/ls will do a second stat
call if the first fails"
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637 [1]
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
* tag 'afs-fixes-20231221' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys, dns: Allow key types (eg. DNS) to be reclaimed immediately on expiry
afs: Fix dynamic root lookup DNS check
afs: Fix the dynamic root's d_delete to always delete unused dentries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi and bpf.
Current release - regressions:
- bpf: syzkaller found null ptr deref in unix_bpf proto add
- eth: i40e: fix ST code value for clause 45
Previous releases - regressions:
- core: return error from sk_stream_wait_connect() if sk_wait_event()
fails
- ipv6: revert remove expired routes with a separated list of routes
- wifi rfkill:
- set GPIO direction
- fix crash with WED rx support enabled
- bluetooth:
- fix deadlock in vhci_send_frame
- fix use-after-free in bt_sock_recvmsg
- eth: mlx5e: fix a race in command alloc flow
- eth: ice: fix PF with enabled XDP going no-carrier after reset
- eth: bnxt_en: do not map packet buffers twice
Previous releases - always broken:
- core:
- check vlan filter feature in vlan_vids_add_by_dev() and
vlan_vids_del_by_dev()
- check dev->gso_max_size in gso_features_check()
- mptcp: fix inconsistent state on fastopen race
- phy: skip LED triggers on PHYs on SFP modules
- eth: mlx5e:
- fix double free of encap_header
- fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()"
* tag 'net-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
net: check dev->gso_max_size in gso_features_check()
kselftest: rtnetlink.sh: use grep_fail when expecting the cmd fail
net/ipv6: Revert remove expired routes with a separated list of routes
net: avoid build bug in skb extension length calculation
net: ethernet: mtk_wed: fix possible NULL pointer dereference in mtk_wed_wo_queue_tx_clean()
net: stmmac: fix incorrect flag check in timestamp interrupt
selftests: add vlan hw filter tests
net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
net: hns3: add new maintainer for the HNS3 ethernet driver
net: mana: select PAGE_POOL
net: ks8851: Fix TX stall caused by TX buffer overrun
ice: Fix PF with enabled XDP going no-carrier after reset
ice: alter feature support check for SRIOV and LAG
ice: stop trashing VF VSI aggregator node ID information
mailmap: add entries for Geliang Tang
mptcp: fill in missing MODULE_DESCRIPTION()
mptcp: fix inconsistent state on fastopen race
selftests: mptcp: join: fix subflow_send_ack lookup
net: phy: skip LED triggers on PHYs on SFP modules
bpf: Add missing BPF_LINK_TYPE invocations
...
|
|
If a key has an expiration time, then when that time passes, the key is
left around for a certain amount of time before being collected (5 mins by
default) so that EKEYEXPIRED can be returned instead of ENOKEY. This is a
problem for DNS keys because we want to redo the DNS lookup immediately at
that point.
Fix this by allowing key types to be marked such that keys of that type
don't have this extra period, but are reclaimed as soon as they expire and
turn this on for dns_resolver-type keys. To make this easier to handle,
key->expiry is changed to be permanent if TIME64_MAX rather than 0.
Furthermore, give such new-style negative DNS results a 1s default expiry
if no other expiry time is set rather than allowing it to stick around
indefinitely. This shouldn't be zero as ls will follow a failing stat call
immediately with a second with AT_SYMLINK_NOFOLLOW added.
Fixes: 1a4240f4764a ("DNS: Separate out CIFS DNS Resolver code")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Wang Lei <wang840925@gmail.com>
cc: Jeff Layton <jlayton@redhat.com>
cc: Steve French <smfrench@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: keyrings@vger.kernel.org
cc: netdev@vger.kernel.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-12-21
Hi David, hi Jakub, hi Paolo, hi Eric,
The following pull-request contains BPF updates for your *net* tree.
We've added 3 non-merge commits during the last 5 day(s) which contain
a total of 4 files changed, 45 insertions(+).
The main changes are:
1) Fix a syzkaller splat which triggered an oob issue in bpf_link_show_fdinfo(),
from Jiri Olsa.
2) Fix another syzkaller-found issue which triggered a NULL pointer dereference
in BPF sockmap for unconnected unix sockets, from John Fastabend.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add missing BPF_LINK_TYPE invocations
bpf: sockmap, test for unconnected af_unix sock
bpf: syzkaller found null ptr deref in unix_bpf proto add
====================
Link: https://lore.kernel.org/r/20231221104844.1374-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add management PF modules, which introduce support for the structures
needed to create the resources for the MGMT PF to work.
Also, add the necessary calls and functions to establish this
functionality.
Signed-off-by: Armen Ratner <armeng@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Daniel Jurgens <danielj@nvidia.com>
|
|
Have an actual mlx5_sd instance in the core device, and fix the getter
accordingly. This allows SD stuff to flow, the feature becomes supported
only here.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The sd_group field moved in the HW spec from the MPIR register
to the vport context.
Align the query accordingly.
Fixes: f5e956329960 ("net/mlx5: Expose Management PCIe Index Register (MPIR)")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit moved the code of mlx5e_create_tises() and changed the
loop to create TISes over MLX5_MAX_PORTS constant value, instead of
getting the correct lag ports supported by the device, which can cause
FW errors on devices with less than MLX5_MAX_PORTS ports.
Change that back to mlx5e_get_num_lag_ports(mdev).
Also IPoIB interfaces create there own TISes, they don't use the eth
TISes, pass a flag to indicate that.
Fixes: b25bd37c859f ("net/mlx5: Move TISes from priv to mdev HW resources")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add MDB net device operation that will be invoked by rtnetlink code in
response to received 'RTM_DELMDB' messages with the 'NLM_F_BULK' flag
set. Subsequent patches will implement the operation in the bridge and
VXLAN drivers.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Subprog call logic in btf_check_subprog_call() currently has both a lot
of BTF parsing logic (which is, presumably, what justified putting it
into btf.c), but also a bunch of register state checks, some of each
utilize deep verifier logic helpers, necessarily exported from
verifier.c: check_ptr_off_reg(), check_func_arg_reg_off(),
and check_mem_reg().
Going forward, btf_check_subprog_call() will have a minimum of
BTF-related logic, but will get more internal verifier logic related to
register state manipulation. So move it into verifier.c to minimize
amount of verifier-specific logic exposed to btf.c.
We do this move before refactoring btf_check_func_arg_match() to
preserve as much history post-refactoring as possible.
No functional changes.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Generalize btf_prepare_func_args() to support both global and static
subprogs. We are going to utilize this property in the next patch,
reusing btf_prepare_func_args() for subprog call logic instead of
reparsing BTF information in a completely separate implementation.
btf_prepare_func_args() now detects whether subprog is global or static
makes slight logic adjustments for static func cases, like not failing
fatally (-EFAULT) for conditions that are allowable for static subprogs.
Somewhat subtle (but major!) difference is the handling of pointer arguments.
Both global and static functions need to handle special context
arguments (which are pointers to predefined type names), but static
subprogs give up on any other pointers, falling back to marking subprog
as "unreliable", disabling the use of BTF type information altogether.
For global functions, though, we are assuming that such pointers to
unrecognized types are just pointers to fixed-sized memory region (or
error out if size cannot be established, like for `void *` pointers).
This patch accommodates these small differences and sets up a stage for
refactoring in the next patch, eliminating a separate BTF-based parsing
logic in btf_check_func_arg_match().
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Instead of btf_check_subprog_arg_match(), use btf_prepare_func_args()
logic to validate "trustworthiness" of main BPF program's BTF information,
if it is present.
We ignored results of original BTF check anyway, often times producing
confusing and ominously-sounding "reg type unsupported for arg#0
function" message, which has no apparent effect on program correctness
and verification process.
All the -EFAULT returning sanity checks are already performed in
check_btf_info_early(), so there is zero reason to have this duplication
of logic between btf_check_subprog_call() and btf_check_subprog_arg_match().
Dropping btf_check_subprog_arg_match() simplifies
btf_check_func_arg_match() further removing `bool processing_call` flag.
One subtle bit that was done by btf_check_subprog_arg_match() was
potentially marking main program's BTF as unreliable. We do this
explicitly now with a dedicated simple check, preserving the original
behavior, but now based on well factored btf_prepare_func_args() logic.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
btf_prepare_func_args() is used to understand expectations and
restrictions on global subprog arguments. But current implementation is
hard to extend, as it intermixes BTF-based func prototype parsing and
interpretation logic with setting up register state at subprog entry.
Worse still, those registers are not completely set up inside
btf_prepare_func_args(), requiring some more logic later in
do_check_common(). Like calling mark_reg_unknown() and similar
initialization operations.
This intermixing of BTF interpretation and register state setup is
problematic. First, it causes duplication of BTF parsing logic for global
subprog verification (to set up initial state of global subprog) and
global subprog call sites analysis (when we need to check that whatever
is being passed into global subprog matches expectations), performed in
btf_check_subprog_call().
Given we want to extend global func argument with tags later, this
duplication is problematic. So refactor btf_prepare_func_args() to do
only BTF-based func proto and args parsing, returning high-level
argument "expectations" only, with no regard to specifics of register
state. I.e., if it's a context argument, instead of setting register
state to PTR_TO_CTX, we return ARG_PTR_TO_CTX enum for that argument as
"an argument specification" for further processing inside
do_check_common(). Similarly for SCALAR arguments, PTR_TO_MEM, etc.
This allows to reuse btf_prepare_func_args() in following patches at
global subprog call site analysis time. It also keeps register setup
code consistently in one place, do_check_common().
Besides all this, we cache this argument specs information inside
env->subprog_info, eliminating the need to redo these potentially
expensive BTF traversals, especially if BPF program's BTF is big and/or
there are lots of global subprog calls.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-12-19
Hi David, hi Jakub, hi Paolo, hi Eric,
The following pull-request contains BPF updates for your *net-next* tree.
We've added 2 non-merge commits during the last 1 day(s) which contain
a total of 40 files changed, 642 insertions(+), 2926 deletions(-).
The main changes are:
1) Revert all of BPF token-related patches for now as per list discussion [0],
from Andrii Nakryiko.
[0] https://lore.kernel.org/bpf/CAHk-=wg7JuFYwGy=GOMbRCtOL+jwSQsdUaBsRWkDVYbxipbM5A@mail.gmail.com
2) Fix a syzbot-reported use-after-free read in nla_find() triggered from
bpf_skb_get_nlattr_nest() helper, from Jakub Kicinski.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
Revert BPF token-related functionality
bpf: Use nla_ok() instead of checking nla_len directly
====================
Link: https://lore.kernel.org/r/20231219170359.11035-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch includes the following revert (one conflicting BPF FS
patch and three token patch sets, represented by merge commits):
- revert 0f5d5454c723 "Merge branch 'bpf-fs-mount-options-parsing-follow-ups'";
- revert 750e785796bb "bpf: Support uid and gid when mounting bpffs";
- revert 733763285acf "Merge branch 'bpf-token-support-in-libbpf-s-bpf-object'";
- revert c35919dcce28 "Merge branch 'bpf-token-and-bpf-fs-based-delegation'".
Link: https://lore.kernel.org/bpf/CAHk-=wg7JuFYwGy=GOMbRCtOL+jwSQsdUaBsRWkDVYbxipbM5A@mail.gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Make the code using filter function a bit nicer by consolidating the
filter function arguments using typedef.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 5f05285df691b1e82108eead7165feae238c95ef.
This commit assumes that every HID descriptor for ALS sensor has
presence of usage id ID HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE.
When the above usage id is absent, driver probe fails. This breaks
ALS sensor functionality on many platforms.
Till we have a good solution, revert this commit.
Reported-by: Thomas Weißschuh <thomas@t-8ch.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218223
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: <stable@vger.kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231217200703.719876-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit ee3710f39f9d0ae5137a866138d005fe1ad18132.
This commit assumes that every HID descriptor for ALS sensor has
presence of usage id ID HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X and
HID_USAGE_SENSOR_LIGHT_CHROMATICITY_Y. When the above usage ids are
absent, driver probe fails. This breaks ALS sensor functionality on
many platforms.
Till we have a good solution, revert this commit.
Reported-by: Thomas Weißschuh <thomas@t-8ch.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218223
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: <stable@vger.kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231217200703.719876-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-12-18
This PR is larger than usual and contains changes in various parts
of the kernel.
The main changes are:
1) Fix kCFI bugs in BPF, from Peter Zijlstra.
End result: all forms of indirect calls from BPF into kernel
and from kernel into BPF work with CFI enabled. This allows BPF
to work with CONFIG_FINEIBT=y.
2) Introduce BPF token object, from Andrii Nakryiko.
It adds an ability to delegate a subset of BPF features from privileged
daemon (e.g., systemd) through special mount options for userns-bound
BPF FS to a trusted unprivileged application. The design accommodates
suggestions from Christian Brauner and Paul Moore.
Example:
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
-o delegate_cmds=prog_load:MAP_CREATE \
-o delegate_progs=kprobe \
-o delegate_attachs=xdp
3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei.
- Complete precision tracking support for register spills
- Fix verification of possibly-zero-sized stack accesses
- Fix access to uninit stack slots
- Track aligned STACK_ZERO cases as imprecise spilled registers.
It improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs.
- Fix verifier retval logic
4) Support for VLAN tag in XDP hints, from Larysa Zaremba.
5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu.
End result: better memory utilization and lower I$ miss for calls to BPF
via BPF trampoline.
6) Fix race between BPF prog accessing inner map and parallel delete,
from Hou Tao.
7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu.
It allows BPF interact with IPSEC infra. The intent is to support
software RSS (via XDP) for the upcoming ipsec pcpu work.
Experiments on AWS demonstrate single tunnel pcpu ipsec reaching
line rate on 100G ENA nics.
8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao.
9) BPF file verification via fsverity, from Song Liu.
It allows BPF progs get fsverity digest.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits)
bpf: Ensure precise is reset to false in __mark_reg_const_zero()
selftests/bpf: Add more uprobe multi fail tests
bpf: Fail uprobe multi link with negative offset
selftests/bpf: Test the release of map btf
s390/bpf: Fix indirect trampoline generation
selftests/bpf: Temporarily disable dummy_struct_ops test on s390
x86/cfi,bpf: Fix bpf_exception_cb() signature
bpf: Fix dtor CFI
cfi: Add CFI_NOSEAL()
x86/cfi,bpf: Fix bpf_struct_ops CFI
x86/cfi,bpf: Fix bpf_callback_t CFI
x86/cfi,bpf: Fix BPF JIT call
cfi: Flip headers
selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment
selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test
selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment
bpf: Limit the number of kprobes when attaching program to multiple kprobes
bpf: Limit the number of uprobes when attaching program to multiple uprobes
bpf: xdp: Register generic_kfunc_set with XDP programs
selftests/bpf: utilize string values for delegate_xxx mount options
...
====================
Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
