| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This includes a significant number of low-priority fixes - especially
in the NIC drivers area - that we deferred from the last few RCs in
the previous cycle, which can't be easily outlined in the synopsis
below.
Core & protocols:
- Continue the work on removing rtnl_lock dependencies:
- per-netns ARP and ND neighbour tables, with the default settings
now configurable per netns (inheritance from init_net is
controlled by the new net.core.neigh_inherit_init_net sysctl)
- RCU-protected configuration and rtnl_lock-less fill_info() for
hsr, netkit, sit, vlan and vxlan devices
- per-netns device unregistration for ip tunnel and gre devices
- use the netdev instance lock instead of rtnl_lock when reading
speed and duplex via sysfs
- batch the flushing of uncached routes at device unregistration
time, relieving rtnl_lock contention on netns dismantle.
- Add hardware pacing offload support, admin-controlled via a new
rtnetlink attribute, with sch_fq integration (implemented in idpf).
- Re-segment BIG TCP GSO packets into GSO packets fitting the egress
device limits instead of plain MSS-sized segments, improving
throughput for mixed BIG TCP / non-BIG TCP paths by up to 70%.
- Generate RSS keys that spread flows over all the RX queues; the
previous random keys could leave some queues unused.
- Optimize the bridge VLAN forwarding paths: cache the port-VLAN in
fdb entries and consider only VLAN members when flooding, for ~10%
more Mpps in the fdb forwarding path.
- A few TCP/IP performance improvements aimed at efficient cache
usage and reducing contention.
- Add the TCP ROCCET congestion control, a CUBIC variant aimed at
avoiding bufferbloat in cellular networks.
- Continue the conversion of getsockopt callbacks to sockopt_t.
- Add an ethtool command to list the front-facing ports of an
interface, including SFP cages and modules, using the phy_port
representation.
- Enable BIG TCP support for bareudp tunnels.
- Remove the IPV6_ADDRFORM socket option and disallow buggy TCP state
transitions (listen() + shutdown() + connect() and connect() +
connect(AF_UNSPEC) + listen()).
- Remove most BUG_ON()s from core packet processing, replacing them
with error paths.
Wireless:
- Latency improvements, including lockless station get/dump and
beacon updates, plus RTNL reduction and locking cleanups.
- Infrastructure for non-station TX/RX with MLO.
- NAN (Wi-Fi Aware) Instant Communication support and other NAN
improvements.
- Control frame Integrity Protocol (CIP) and protected TWT support.
- Improvements for AP regulatory checks.
Netfilter:
- Disable br_netfilter in user namespaces and schedule it for removal
in 2027.
- Restrict the raw table in nft_compat to the specific family, hook
and priority.
- Prepare the flowtable for mixed IPv4-over-IPv6 tunneling (and vice
versa).
- Use GFP_KERNEL_ACCOUNT for most netfilter allocations, for better
integration with memcg.
- Allow discovering conntrack zone filtering support in ctnetlink
dumps, and fix nfnetlink_hook handling of large dumps.
Deletions:
- Move the LLC type 2 sockets out of tree. There are no known users
and the code attracts a never-ending stream of LLM-driven fixes.
Device drivers:
- New drivers:
- Meta Platforms NIC (mpnic), the second-generation NIC from Meta
- initial skeleton of the Nebula-matrix NICs driver (nbl)
- X-Powers AC200/AC300 Fast Ethernet PHYs
- Ethernet high-speed NICs:
- Intel:
- i40e: XDP metadata support for RX hash and VLAN tag
- ice: expose the E825 TSPLL state via the DPLL subsystem
- nVidia/Mellanox:
- move the data direct infrastructure from IB to core, in
preparation for netdev support.
- reduce the memory used per offloaded TC rule
- Meta (fbnic):
- support large io_uring zero-copy RX buffers
- Microsoft vNIC (mana):
- add BQL support
- Ethernet NICs consumer, and embedded:
- Airoha:
- LRO offload support
- Cadence (macb):
- context swapping for ringparam and MTU changes, avoiding
buffer loss under memory pressure
- Mucse (rnpgbe):
- TX/RX and link status support
- NXP (enetc):
- SR-IOV improvements and VF support for ENETC v4
- Qualcomm (ppe):
- IPQ5424 support
- Realtek PCI (r8169):
- phylink support
- RSS support for RTL8127
- Renesas (ravb):
- gPTP support for R-Car Gen4
- Synopsys (stmmac):
- XDP multi-buffer support on the TX side
- tc mqprio hw queue priority offload
- support for RK3568 SGMII, Allwinner H616 EMAC1, UltraRISC
DP1000 and Qualcomm sa8255p
- Ethernet switches:
- Mediatek (mt7530):
- fast age and change conduit support
- Microchip (ksz):
- support for KSZ8995XA/KS8995XA
- Microchip (lan966x):
- PCIe FDMA support, ~20x throughput increase in PCIe endpoint
- Microchip (sparx5):
- Time Aware Shaper (taprio) offload
- Motorcomm (yt921x):
- LED and SerDes PCS support
- Realtek (rtl8365mb):
- EEE support
- Ethernet PHYs:
- Broadcom:
- enable jumbo frames on BCM54xx
- Realtek:
- support for RTL8261CE_CG and RTL8261D_VM
- MDIO support for RTL838x and RTL839x
- WiFi drivers:
- Broadcom (brcmfmac):
- FT/OKC roaming offload
- Intel (iwlwifi):
- UHR sniffer support
- support for newer UEFI/BIOS tables
- MediaTek (mt76):
- mt7925 NAN improvements
- offchannel/scan improvements and MLO fixes
- Morse Micro (mm81x):
- monitor mode support
- Qualcomm (ath12k):
- IPQ5332 platform infrastructure
- Realtek (rtw88):
- RTL8723BS support
- SDIO TX performance improvements
- Realtek (rtw89):
- P2P_DEVICE support
- BT-coex updates for RTL8922D
- Bluetooth:
- move H:4 reassembly into the Bluetooth core
- add generic support for vendor packets
- MGMT: add security level changed event
- Bluetooth drivers:
- btusb: support Bulk Serialization Mode
- Intel: support Draco and Titan Lake, allow unsigned firmware
- Mediatek: MT7928 support
- Qualcomm: QCC2072 support
- Broadcom: Synaptics 4384 support"
* tag 'net-next-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2126 commits)
Bluetooth: btusb: disable by default Qualcomm multi-subsystem
tipc: fix broadcast sender hang on last acker departure
tipc: fix use-after-free of broadcast reception link at node release
r8169: clear TX LPI on RTL8168h at link up after phylink conversion
tun: Require CAP_NET_ADMIN to attach to an ownerless device
net/sched/sch_cake: drop dead nla_nest_end() error check
net/sched/sch_cake: widen buffer_used to u64
net/sched/sch_cake: reduce parent backlog when clearing a tin
net/sched/sch_cake: serialize reconfiguration with the datapath
tg3: Add Datto SIRIS 5 1U Server to restart AER quirk table
net/mlx5e: Stop asserting for RTNL when closing channels
net: shrink the payload-only part of skb dataref to one bit
net: wwan: iosm: validate msg_head before indexing msg_ring
net: bgmac: rate limit RX error messages
selftests: net: veth: test XDP_TX to a peer with GRO enabled
veth: schedule the peer's NAPI after XDP_TX when only GRO is enabled
pppoe: delete session hash entries by pointer match
net: lan969x: don't disable hardirqs in fdma tx clear
net: sparx5/lan969x: do not clobber the PSFP cycle timer update period
net: lan969x: fix DSM calendar for empty taxis
...
|
|
Add mmc_send_tuning_timeout() which takes the data timeout in
milliseconds, and turn mmc_send_tuning() into a thin wrapper keeping
the current 150 ms, so there is no behaviour change for the existing
callers. This lets drivers pass a tighter timeout for software
tuning, e.g. hosts which scan the tuning window phase by phase.
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
The NXP IW610 SDIO chipset identifies itself with a base card ID
(0x0214) during the initial MMC bus scan, whereas the WLAN function
reports a different ID (0x0215).
Like the IW61x, the IW610 requires MMC_QUIRK_BLKSZ_FOR_BYTE_MODE for
correct byte-mode block size handling. Since SDIO fixups are applied
before function devices are enumerated, the quirk must be associated
with the base card ID rather than the WLAN function ID.
Add the SDIO_DEVICE_ID_NXP_IW610_BASE definition and apply the required
fixup in the SDIO quirk table.
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
Acked-by: Ulf Hansson <ulfh@kernel.org>
|
|
Add SDIO device ID (0x0215) for NXP IW610 to sdio_ids.h. It is used
by the nxpwifi driver to probe the IW610 chip over SDIO.
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
Acked-by: Ulf Hansson <ulfh@kernel.org>
|
|
As there are no longer any users of these functions, let's make them
internal to the mmc core. While at it, let's also flip the order of the
in-parameters to mmc_alloc_host() to be consistent with devm_alloc_host().
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Reviewed-by: Shawn Lin <shawn.lin@linux.dev>
|
|
The register context for the crypto profile belongs to the sdhci/cqhci host
and not the mmc card, hence re-programming should be managed by the host
driver itself.
Add the flag MMC_CAP2_CRYPTO_NO_REPROG as part of host->caps2 to control
reprogramming keys to crypto engine for SoCs which do not require this
feature.
Signed-off-by: Seshu Madhavi Puppala <quic_spuppala@quicinc.com>
Co-developed-by: Ram Prakash Gupta <quic_rampraka@quicinc.com>
Signed-off-by: Ram Prakash Gupta <quic_rampraka@quicinc.com>
Co-developed-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Signed-off-by: Debraj Mukhopadhyay <quic_dmukhopa@quicinc.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Neeraj Soni <neeraj.soni@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Add support for power-off-delay-us which shall be used to specify
value of delay after deasserting power during MMC power cycles.
Default for delay is 1000us but custom delay can be passed in to work
around hardware issues such as slow RC discharge on MMC VDD rails.
Signed-off-by: Judith Mendez <jm@ti.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
wireless-next-2026-07-26
Mostly driver changes this time:
- new driver mm81x for an S1G device
- new driver nxpwifi for NXP devices
(mostly forked off from mwifiex)
- ath12k: much kernel infrastructure integration work
- brcmfmac: DPP support, some Cypress part update
- nl80211: per-link statistics support
====================
Link: https://patch.msgid.link/20260726105205.942922-60-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jeff Chen says:
===============
wifi: nxp: patches for wireless-next
In nxpwifi, introduce initial driver support for NXP IW61x Wi-Fi chipsets.
The driver supports 802.11ac/ax, SDIO interface, Station and uAP modes.
===============
[list the full vendor directory in MAINTAINERS]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The NXP IW61x series SDIO chipset identifies itself with a base card ID
(0x0204) during the initial MMC bus scan, while the specific WLAN
function reports a different ID (0x0205).
To ensure that the MMC_QUIRK_BLKSZ_FOR_BYTE_MODE quirk is correctly
inherited by all SDIO functions (including Wi-Fi), it must be attached
to the base card ID at the core level.
Add the SDIO_DEVICE_ID_NXP_IW61X_BASE definition and apply the required
fixup in the SDIO quirk table.
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
|
|
Add the Morse Micro mm81x series vendor ids.
Acked-by: Ulf Hansson <ulfh@kernel.org>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
|
|
(headers)
<linux/mod_devicetable.h> is included in a many files:
$ git grep '<linux/mod_devicetable.h>' ef0c9f75a195 | wc -l
1598
; some of them are widely used headers. To stop mixing up different and
unrelated driver( type)s let the subsystem headers only use the subset
of the recently split <linux/mod_devicetable.h> that are relevant for
them.
The fallout (I hope) is addressed in the previous commits that handle
sources relying on e.g. <linux/i2c.h> pulling in the full legacy header
and thus providing pci_device_id.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/199fe46b624ba07fb9bd3e0cd6ff13757932cb5f.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add NXP vendor and IW61x device IDs for WiFi chips over SDIO
- Add quirk for incorrect manufacturing date
- Add support for manufacturing date beyond 2025
- Optimize support for secure erase/trim for some Kingston eMMCs
- Remove support for the legacy "enable-sdio-wakeup" DT property
- Use single block writes in the retry path
MMC host:
- dw_mmc:
- A great amount of cleanups/simplifications to improve the code
- Add clk_phase_map support
- Remove mshc DT alias support
- dw_mmc-rockchip:
- Fix runtime PM support for internal phase
- Add support for the RV1103B variant
- loongson2:
- Add support for the Loongson-2K0300 SD/SDIO/eMMC controller
- mtk-sd:
- Add support for the MT8189 variant
- renesas_sdhi_core:
- Add support for selecting an optional mux
- rtsx_pci_sdmmc:
- Simplify voltage switch handling
- sdhci:
- Stop advertising the driver in dmesg
- sdhci-esdhc-imx:
- Add 1-bit bus width support
- Add support for the NXP S32N79 variant
- sdhci-msm:
- Add support for the IPQ5210 and IPQ9650 variants
- Add support for wrapped keys
- Enable ICE for CQE-capable controllers with non-CQE cards
- sdhci-of-arasan:
- Add support for the Axiado AX3000 variant
- sdhci-of-aspeed:
- Add support for the AST2700 variant
- sdhci-of-bst:
- Add driver for the Black Sesame Technologies C1200 controller
- sdhci-of-dwcmshc:
- Add support for the Canaan K230 variant
- Add support for the HPE GSC variant
- Prevent clock glitches to avoid malfunction
- sdhci-of-k1:
- Add support for the K3 variant
mux core/consumers:
- core:
- Add helper functions for getting optional and selected mux-state
- i2c-omap:
- Convert to devm_mux_state_get_optional_selected()
- phy-renesas:
- Convert to devm_mux_state_get_optional_selected()
- phy-can-transceiver:
- Convert to devm_mux_state_get_optional()"
* tag 'mmc-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (131 commits)
mmc: sdhci-msm: Fix the wrapped key handling
mmc: sdhci-of-dwcmshc: Disable clock before DLL configuration
mmc: core: Simplify with scoped for each OF child loop
mmc: core: Optimize size of struct mmc_queue_req
mmc: vub300: clean up module init
mmc: vub300: rename probe error labels
mmc: dw_mmc: Remove dw_mci_start_request wrapper and rename core function
mmc: dw_mmc: Inline dw_mci_queue_request() into dw_mci_request()
mmc: block: Use MQRQ_XFER_SINGLE_BLOCK for both read and write recovery
mmc: mmc_test: Replace hard-coded values with macros and consolidate test parameters
mmc: block: Convert to use DEFINE_SIMPLE_DEV_PM_OPS()
mmc: core: Replace the hard-coded shift value 9 with SECTOR_SHIFT
mmc: sdhci-dwcmshc: Refactor Rockchip platform data for controller revisions
mmc: core: Switch to use pm_ptr() for mmc_host_class_dev_pm_ops
mmc: core: Remove legacy 'enable-sdio-wakeup' DT property support
mmc: mmc_test: use kzalloc_flex
mmc: mtk-sd: disable new_tx/rx and modify related settings for mt8189
dt-bindings: mmc: hisilicon,hi3660-dw-mshc: Convert to DT schema
dt-bindings: mmc: sdhci-msm: add IPQ9650 compatible
mmc: block: use single block write in retry
...
|
|
Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Merge the mmc fixes for v7.0-rc[n] into the next branch, to allow them to
get tested together with the mmc changes that are targeted for the next
release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Move claimed and retune control flags out of the bitfield word to
avoid unrelated RMW side effects in asynchronous contexts.
The host->claimed bit shared a word with retune flags. Writes to claimed
in __mmc_claim_host() or retune_now in mmc_mq_queue_rq() can overwrite
other bits when concurrent updates happen in other contexts, triggering
spurious WARN_ON(!host->claimed). Convert claimed, can_retune,
retune_now and retune_paused to bool to remove shared-word coupling.
Fixes: 6c0cedd1ef952 ("mmc: core: Introduce host claiming by context")
Fixes: 1e8e55b67030c ("mmc: block: Add CQE support")
Cc: stable@vger.kernel.org
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Penghe Geng <pgeng@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Kingston eMMC IY2964 and IB2932 takes a fixed ~2 seconds for each secure
erase/trim operation regardless of size - that is, a single secure
erase/trim operation of 1MB takes the same time as 1GB. With default
calculated 3.5MB max discard size, secure erase 1GB requires ~300 separate
operations taking ~10 minutes total.
Add a card quirk, MMC_QUIRK_FIXED_SECURE_ERASE_TRIM_TIME, to set maximum
secure erase size for those devices. This allows 1GB secure erase to
complete in a single operation, reducing time from 10 minutes to just 2
seconds.
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add NXP's SDIO vendor ID (0x0471) and IW61x device ID (0x0205) to
sdio_ids.h for future support of NXP Wi-Fi chips over SDIO.
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some eMMC vendors need to report manufacturing dates beyond 2025 but are
reluctant to update the EXT_CSD revision from 8 to 9. Changing the
Updating the EXT_CSD revision may involve additional testing or
qualification steps with customers. To ease this transition and avoid a
full re-qualification process, a workaround is needed. This
patch introduces a temporary quirk that re-purposes the year codes
corresponding to 2010, 2011, and 2012 to represent the years 2026, 2027,
and 2028, respectively. This solution is only valid for this three-year
period.
After 2028, vendors must update their firmware to set EXT_CSD_REV=9 to
continue reporting the correct manufacturing date in compliance with the
JEDEC standard.
The `MMC_QUIRK_BROKEN_MDT` is introduced and enabled for all Sandisk
devices to handle this behavior.
Signed-off-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To prepare sdio drivers to migrate away from struct device_driver::shutdown
(and then eventually remove that callback) create a serdev driver shutdown
callback and migration code to keep the existing behaviour. Note this
introduces a warning for each driver that isn't converted yet to that
callback at register time.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/397f45c2818f6632151f92b70e547262f373c3b6.1768232321.git.u.kleine-koenig@baylibre.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Let's avoid updating the SD current limit when the maximum power is 200mA
(0.72W) or less, as this is already the default value for the SD card. In
this way we avoid sending an unnecessary command during initialization.
Signed-off-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
|
|
Introduce a new device tree flag to cap the maximum High-Speed (HS)
mode frequency for SD cards, accommodating board-specific
electrical limitations which cannot support the default 50Mhz HS
frequency and others.
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Cypress(Infineon) is not the vendor for this 43752 SDIO WLAN chip, and so
has not officially released any firmware binary for it. It is incorrect to
maintain this WLAN chip with firmware vendor ID as "CYW". So relabel the
chip's firmware Vendor ID as "WCC" as suggested by the maintainer.
Fixes: d2587c57ffd8 ("brcmfmac: add 43752 SDIO ids and initialization")
Fixes: f74f1ec22dc2 ("wifi: brcmfmac: add support for Cypress firmware api")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250724101136.6691-1-gokulkumar.sivakumar@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Implement the core infrastructure to allow MMC bus types to handle
REGULATOR_EVENT_UNDER_VOLTAGE events from power regulators. This is
primarily aimed at allowing devices like eMMC to perform an emergency
shutdown to prevent data corruption when a power failure is imminent.
This patch introduces:
- A new 'handle_undervoltage' function pointer to 'struct mmc_bus_ops'.
Bus drivers (e.g., for eMMC) can implement this to define their
emergency procedures.
- A workqueue ('uv_work') in 'struct mmc_supply' to handle the event
asynchronously in a high-priority context.
- A new function 'mmc_handle_undervoltage()' which is called from the
workqueue. It stops the host queue to prevent races with card removal,
checks for the bus op, and invokes the handler.
- Functions to register and unregister the regulator notifier, intended
to be called by bus drivers like 'mmc_attach_mmc' when a compatible
card is detected.
The notifier is only registered for the main vmmc supply, as
undervoltage handling for vqmmc or vqmmc2 is not required at this
time.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250821130751.2089587-2-o.rempel@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Provide a function to the MMC hosts to read some blocks of data as part
of their tuning.
This function only returns the status of the read operation, not the
data read.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Link: https://lore.kernel.org/r/20250818-mobileye-emmc-for-upstream-4-v4-5-34ecb3995e96@bootlin.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add the SDIO ID and firmware matching for the 43751 device.
Based on the previous work from Marc Gonzalez <mgonzalez@freebox.fr>.
Tested on an i.MX6DL board connected to an AP6398SV chip with the
brcmfmac43752-sdio.bin firmware taken from:
https://source.puri.sm/Librem5/firmware-brcm43752-nonfree
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250712215307.1310802-1-festevam@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mmc_can_* functions sometimes relate to the card and sometimes to the host.
Make it obvious by renaming this function to include 'host'.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250401095847.29271-12-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
mmc_can_* functions sometimes relate to the card and sometimes to the host.
Make it obvious by renaming this function to include 'host'.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250401095847.29271-11-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Adds the MMC_QUIRK_NO_UHS_DDR50_TUNING quirk and updates
mmc_execute_tuning() to return 0 if that quirk is set. This fixes an
issue on certain Swissbit SD cards that do not support DDR50 tuning
where tuning requests caused I/O errors to be thrown.
Signed-off-by: Erick Shepherd <erick.shepherd@ni.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250331221337.1414534-1-erick.shepherd@ni.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
mmc_gpio_set_cd_isr() last use was removed in 2018 by
commit 7838a8ddc80b ("mmc: omap_hsmmc: Kill off cover detection")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250129214335.125292-1-linux@treblig.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add a helper function that encapsulates a container_of expression. For
now there is just one user but soon there will be more.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Message-ID: <20241213041958.202565-7-ebiggers@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The R1B response type with ignoring CRC is used in the mmc_cqe_recovery(),
introduce the MMC_RSP_R1B_NO_CRC response type to simplify the code.
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Message-ID: <20241126125041.16071-2-andy-ld.lu@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The MMC_RSP_R1_NO_CRC type of response is not being used by the mmc core
for any commands. Let's therefore drop it, together with the corresponding
code in the host drivers.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # for TMIO
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Message-ID: <20241125132311.23939-1-ulf.hansson@linaro.org>
|
|
Embed UHS-II access/control functionality into the MMC request
processing flow.
Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Message-ID: <20241018105333.4569-2-victorshihgli@gmail.com>
[Ulf: A couple of cleanups and fixed sd_uhs2_power_off()]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add UHS-II specific data structures for commands and defines for
registers, as described in Part 1 UHS-II Addendum Version 1.01.
UHS-II related definitions are listed below:
1. UHS-II card capability: sd_uhs2_caps{}
2. UHS-II configuration: sd_uhs2_config{}
3. UHS-II register I/O address and register field definitions: sd_uhs2.h
Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20240913102836.6144-6-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To allow an additional external regulator to be controlled by an mmc host
driver, let's add support for a vqmmc2 regulator to the mmc core.
For an SD UHS-II interface the vqmmc2 regulator may correspond to the so
called vdd2 supply, as described by the SD spec. Initially, only 1.8V is
needed, hence limit the new helper function, mmc_regulator_set_vqmmc2() to
this too.
Note that, to allow for flexibility mmc host drivers need to manage the
enable/disable of the vqmmc2 regulator themselves, while the regulator is
looked up through the common mmc_regulator_get_supply().
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240913102836.6144-5-victorshihgli@gmail.com
|
|
To inform the users about SD UHS-II cards, let's extend the print at card
insertion with a "UHS-II" substring. Within this change, it seems
reasonable to convert from using "ultra high speed" into "UHS-I speed", for
the UHS-I type, as it should makes it more clear.
Note that, the new print for UHS-II cards doesn't include the actual
selected speed mode. Instead, this is going to be added from subsequent
change.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240913102836.6144-4-victorshihgli@gmail.com
|
|
The SD UHS-II interface was introduced to the SD spec v4.00 several years
ago. The interface is fundamentally different from an electrical and a
protocol point of view, comparing to the legacy SD interface.
However, the legacy SD protocol is supported through a specific transport
layer (SD-TRAN) defined in the UHS-II addendum of the spec. This allows the
SD card to be managed in a very similar way as a legacy SD card, hence a
lot of code can be re-used to support these new types of cards through the
mmc subsystem.
Moreover, an SD card that supports the UHS-II interface shall also be
backwards compatible with the legacy SD interface, which allows a UHS-II
card to be inserted into a legacy slot. As a matter of fact, this is
already supported by mmc subsystem as of today.
To prepare to add support for UHS-II, this change puts the basic foundation
in the mmc core in place, allowing it to be more easily reviewed before
subsequent changes implements the actual support.
Basically, the approach here adds a new UHS-II bus_ops type and adds a
separate initialization path for the UHS-II card. The intent is to avoid us
from sprinkling the legacy initialization path, but also to simplify
implementation of the UHS-II specific bits.
At this point, there is only one new host ops added to manage the various
ios settings needed for UHS-II. Additional host ops that are needed, are
being added from subsequent changes.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240913102836.6144-3-victorshihgli@gmail.com
|
|
For open-ended read/write - just send CMD22 before issuing the command.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241006051148.160278-5-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
SDUC memory addressing spans beyond 2TB and up to 128TB. Therefore, 38
bits are required to access the entire memory space of all sectors.
Those extra 6 bits are to be carried by CMD22 prior of sending
read/write/erase commands: CMD17, CMD18, CMD24, CMD25, CMD32, and CMD33.
CMD22 will carry the higher order 6 bits, and must precedes any of the
above commands even if it targets sector < 2TB.
No error related to address or length is indicated in CMD22 but rather
in the read/write command itself.
Tested-by: Ricky WU <ricky_wu@realtek.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241006051148.160278-3-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Ultra Capacity SD cards (SDUC) was already introduced in SD7.0. Those
cards support capacity larger than 2TB and up to including 128TB.
ACMD41 was extended to support the host-card handshake during
initialization. The card expects that the HCS & HO2T bits to be set in
the command argument, and sets the applicable bits in the R3 returned
response. On the contrary, if a SDUC card is inserted to a
non-supporting host, it will never respond to this ACMD41 until
eventually, the host will timed out and give up.
Also, add SD CSD version 3.0 - designated for SDUC, and properly parse
the csd register as the c_size field got expanded to 28 bits.
Do not enable SDUC for now - leave it to the last patch in the series.
Tested-by: Ricky WU <ricky_wu@realtek.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241006051148.160278-2-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
GIGASTONE Gaming Plus microSD cards manufactured on 02/2022 report that
they support poweroff notification and cache, but they are not working
correctly.
Flush Cache bit never gets cleared in sd_flush_cache() and Poweroff
Notification Ready bit also never gets set to 1 within 1 second from the
end of busy of CMD49 in sd_poweroff_notify().
This leads to I/O error and runtime PM error state.
I observed that the same card manufactured on 01/2024 works as expected.
This problem seems similar to the Kingston cards fixed with
commit c467c8f08185 ("mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston
Canvas Go Plus from 11/2019") and should be handled using quirks.
CID for the problematic card is here.
12345641535443002000000145016200
Manufacturer ID is 0x12 and defined as CID_MANFID_GIGASTONE as of now,
but would like comments on what naming is appropriate because MID list
is not public and not sure it's right.
Signed-off-by: Keita Aihara <keita.aihara@sony.com>
Link: https://lore.kernel.org/r/20240913094417.GA4191647@sony.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
|
|
Replace with already defined values for readability. While at it, let's
also change the mode-parameter from an int to bool, as the only used values
are 0 or 1.
Signed-off-by: Chanwoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20240829024709.402285-1-cw9316.lee@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The fault-inject.h users across the kernel need to add a lot of #ifdef
CONFIG_FAULT_INJECTION to cater for shortcomings in the header. Make
fault-inject.h self-contained for CONFIG_FAULT_INJECTION=n, and add stubs
for DECLARE_FAULT_ATTR(), setup_fault_attr(), should_fail_ex(), and
should_fail() to allow removal of conditional compilation.
[akpm@linux-foundation.org: repair fallout from no longer including debugfs.h into fault-inject.h]
[akpm@linux-foundation.org: fix drivers/misc/xilinx_tmr_inject.c]
[akpm@linux-foundation.org: Add debugfs.h inclusion to more files, per Stephen]
Link: https://lkml.kernel.org/r/20240813121237.2382534-1-jani.nikula@intel.com
Fixes: 6ff1cb355e62 ("[PATCH] fault-injection capabilities infrastructure")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The last users of 'enum mmc_blk_status' and 'struct mmc_async_req'
were removed by commit 126b62700386 ("mmc: core: Remove code no longer
needed after the switch to blk-mq") in 2017, remove these two left-over
data structures.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240823225917.2826156-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The 'mmc_context_info' structure is unused.
It has been introduced in:
- commit 2220eedfd7ae ("mmc: fix async request mechanism for sequential
read scenarios")
in 2013-02 and its usages have been removed in:
- commit 126b62700386 ("mmc: core: Remove code no longer needed after the
switch to blk-mq")
- commit 0fbfd1251830 ("mmc: block: Remove code no longer needed after
the switch to blk-mq")
in 2017-12.
Now remove this unused structure.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/232106a8a6a374dee25feea9b94498361568c10b.1724246389.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Increase the timeout period of the ACMD41 command
- Add card entry for quirks to debugfs
- Add mmc_gpiod_set_cd_config() function
- Store owner from SDIO modules with sdio_register_driver()
MMC host:
- atmel-mci: Some cleanups and a switch to use dev_err_probe()
- renesas_sdhi:
- Add support for RZ/G2L, RZ/G3S and RZ/V2M variants
- Set the SDBUF after reset
- sdhci: Add support for "Tuning Error" interrupts
- sdhci-acpi:
- Add quirk to enable pull-up on the card-detect GPIO on Asus
T100TA
- Disable write protect detection on Toshiba WT10-A
- Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working
- sdhci_am654:
- Re-work and fix the tuning support for multiple speed-modes
- Add tuning algorithm for delay chain
- sdhci-esdhc-imx: Add NXP S32G3 support
- sdhci-of-dwcmshc:
- Add tuning support for Sophgo CV1800B and SG200X
- Implement SDHCI CQE support
- sdhci-pci-gli: Use the proper pci_set_power_state() instead of
PMCSR writes"
MEMSTICK:
- Convert a couple of drivers to use the ->remove_new() callback"
* tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs
dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility
dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list
mmc: renesas_sdhi: Set the SDBUF after reset
mmc: core: Increase the timeout period of the ACMD41 command
mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too
mmc: atmel-mci: Switch to use dev_err_probe()
mmc: atmel-mci: Incapsulate used to be a platform data into host structure
mmc: atmel-mci: Replace platform device pointer by generic one
mmc: atmel-mci: Use temporary variable for struct device
mmc: atmel-mci: Get rid of platform data leftovers
mmc: sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X
mmc: sdhci-of-dwcmshc: Remove useless "&" of th1520_execute_tuning
mmc: sdhci-s3c: Choose sdhci_ops based on variant
mmc: sdhci_am654: Constify struct sdhci_ops
mmc: sdhci-sprd: Constify struct sdhci_ops
mmc: sdhci-omap: Constify struct sdhci_ops
mmc: sdhci-esdhc-mcf: Constify struct sdhci_ops
mmc: slot-gpio: Use irq_handler_t type
mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
|
