| Age | Commit message (Collapse) | Author |
|---|
|
The command "make clang-analyzer" detects dead stores in
mpage_process_page() function.
Do not reset io_end_size to 0 in the current paths, as the function
exits on those paths without further using io_end_size.
Signed-off-by: Nghia Le <nghialm78@gmail.com>
Link: https://lore.kernel.org/r/20211025221803.3326-1-nghialm78@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Ext4 has an optimization mechanism for batched disacrd (FITRIM) that
should help speed up subsequent calls of FITRIM ioctl by skipping the
groups that were previously trimmed. However because the FITRIM allows
to set the minimum size of an extent to trim, ext4 stores the last
minimum extent size and only avoids trimming the group if it was
previously trimmed with minimum extent size equal to, or smaller than
the current call.
There is currently no way to bypass the optimization without
umount/mount cycle. This becomes a problem when the file system is
live migrated to a different storage, because the optimization will
prevent possibly useful discard calls to the storage.
Fix it by exporting the s_last_trim_minblks via sysfs interface which
will allow us to set the minimum size to the number of blocks larger
than subsequent FITRIM call, effectively bypassing the optimization.
By setting the s_last_trim_minblks to ULONG_MAX the optimization will be
effectively cleared regardless of the previous state, or file system
configuration.
For example:
getconf ULONG_MAX > /sys/fs/ext4/dm-1/last_trim_minblks
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Laurent GUERBY <laurent@guerby.net>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20211103145122.17338-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
There is no good reason for the s_last_trim_minblks to be atomic. There is
no data integrity needed and there is no real danger in setting and
reading it in a racy manner. Change it to be unsigned long, the same type
as s_clusters_per_group which is the maximum that's allowed.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20211103145122.17338-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Implement support for FS_IOC_GETFSLABEL and FS_IOC_SETFSLABEL ioctls for
online reading and setting of file system label.
ext4_ioctl_getlabel() is simple, just get the label from the primary
superblock. This might not be the first sb on the file system if
'sb=' mount option is used.
In ext4_ioctl_setlabel() we update what ext4 currently views as a
primary superblock and then proceed to update backup superblocks. There
are two caveats:
- the primary superblock might not be the first superblock and so it
might not be the one used by userspace tools if read directly
off the disk.
- because the primary superblock might not be the first superblock we
potentialy have to update it as part of backup superblock update.
However the first sb location is a bit more complicated than the rest
so we have to account for that.
The superblock modification is created generic enough so the
infrastructure can be used for other potential superblock modification
operations, such as chaning UUID.
Tested with generic/492 with various configurations. I also checked the
behavior with 'sb=' mount options, including very large file systems
with and without sparse_super/sparse_super2.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20211213135618.43303-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Only set EXT4_MOUNT_QUOTA when journalled quota file is specified,
otherwise simply disabling specific quota type (usrjquota=) will also
set the EXT4_MOUNT_QUOTA super block option.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Fixes: e6e268cb6822 ("ext4: move quota configuration out of handle_mount_opt()")
Link: https://lore.kernel.org/r/20220104143518.134465-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
During ext4 mount api rework the commit e6e268cb6822 ("ext4: move quota
configuration out of handle_mount_opt()") introduced a bug where we
would kfree(sbi->s_qf_names[i]) before assigning the new quota name in
ext4_apply_quota_options().
This is wrong because we're using kfree() on rcu prointer that could be
simultaneously accessed from ext4_show_quota_options() during remount.
Fix it by using rcu_replace_pointer() to replace the old qname with the
new one and then kfree_rcu() the old quota name.
Also use get_qf_name() instead of sbi->s_qf_names in strcmp() to silence
the sparse warning.
Fixes: e6e268cb6822 ("ext4: move quota configuration out of handle_mount_opt()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220104143518.134465-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
A user reported FITRIM ioctl failing for him on ext4 on some devices
without apparent reason. After some debugging we've found out that
these devices (being LVM volumes) report rather large discard
granularity of 42MB and the filesystem had 1k blocksize and thus group
size of 8MB. Because ext4 FITRIM implementation puts discard
granularity into minlen, ext4_trim_fs() declared the trim request as
invalid. However just silently doing nothing seems to be a more
appropriate reaction to such combination of parameters since user did
not specify anything wrong.
CC: Lukas Czerner <lczerner@redhat.com>
Fixes: 5c2ed62fd447 ("ext4: Adjust minlen with discard_granularity in the FITRIM ioctl")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211112152202.26614-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Our syzkaller report an use-after-free issue that accessing the freed
buffer_head on the writeback page in __ext4_journalled_writepage(). The
problem is that if there was a truncate racing with the data=journalled
writeback procedure, the writeback length could become zero and
bget_one() refuse to get buffer_head's refcount, then the truncate
procedure release buffer once we drop page lock, finally, the last
ext4_walk_page_buffers() trigger the use-after-free problem.
sync truncate
ext4_sync_file()
file_write_and_wait_range()
ext4_setattr(0)
inode->i_size = 0
ext4_writepage()
len = 0
__ext4_journalled_writepage()
page_bufs = page_buffers(page)
ext4_walk_page_buffers(bget_one) <- does not get refcount
do_invalidatepage()
free_buffer_head()
ext4_walk_page_buffers(page_bufs) <- trigger use-after-free
After commit bdf96838aea6 ("ext4: fix race between truncate and
__ext4_journalled_writepage()"), we have already handled the racing
case, so the bget_one() and bput_one() are not needed. So this patch
simply remove these hunk, and recheck the i_size to make it safe.
Fixes: bdf96838aea6 ("ext4: fix race between truncate and __ext4_journalled_writepage()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211225090937.712867-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We got issue as follows when run syzkaller test:
[ 1901.130043] EXT4-fs error (device vda): ext4_remount:5624: comm syz-executor.5: Abort forced by user
[ 1901.130901] Aborting journal on device vda-8.
[ 1901.131437] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.16: Detected aborted journal
[ 1901.131566] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.11: Detected aborted journal
[ 1901.132586] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.18: Detected aborted journal
[ 1901.132751] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.9: Detected aborted journal
[ 1901.136149] EXT4-fs error (device vda) in ext4_reserve_inode_write:6035: Journal has aborted
[ 1901.136837] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-fuzzer: Detected aborted journal
[ 1901.136915] ==================================================================
[ 1901.138175] BUG: KASAN: null-ptr-deref in __ext4_journal_ensure_credits+0x74/0x140 [ext4]
[ 1901.138343] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.13: Detected aborted journal
[ 1901.138398] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.1: Detected aborted journal
[ 1901.138808] Read of size 8 at addr 0000000000000000 by task syz-executor.17/968
[ 1901.138817]
[ 1901.138852] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.30: Detected aborted journal
[ 1901.144779] CPU: 1 PID: 968 Comm: syz-executor.17 Not tainted 4.19.90-vhulk2111.1.0.h893.eulerosv2r10.aarch64+ #1
[ 1901.146479] Hardware name: linux,dummy-virt (DT)
[ 1901.147317] Call trace:
[ 1901.147552] dump_backtrace+0x0/0x2d8
[ 1901.147898] show_stack+0x28/0x38
[ 1901.148215] dump_stack+0xec/0x15c
[ 1901.148746] kasan_report+0x108/0x338
[ 1901.149207] __asan_load8+0x58/0xb0
[ 1901.149753] __ext4_journal_ensure_credits+0x74/0x140 [ext4]
[ 1901.150579] ext4_xattr_delete_inode+0xe4/0x700 [ext4]
[ 1901.151316] ext4_evict_inode+0x524/0xba8 [ext4]
[ 1901.151985] evict+0x1a4/0x378
[ 1901.152353] iput+0x310/0x428
[ 1901.152733] do_unlinkat+0x260/0x428
[ 1901.153056] __arm64_sys_unlinkat+0x6c/0xc0
[ 1901.153455] el0_svc_common+0xc8/0x320
[ 1901.153799] el0_svc_handler+0xf8/0x160
[ 1901.154265] el0_svc+0x10/0x218
[ 1901.154682] ==================================================================
This issue may happens like this:
Process1 Process2
ext4_evict_inode
ext4_journal_start
ext4_truncate
ext4_ind_truncate
ext4_free_branches
ext4_ind_truncate_ensure_credits
ext4_journal_ensure_credits_fn
ext4_journal_restart
handle->h_transaction = NULL;
mount -o remount,abort /mnt
-> trigger JBD abort
start_this_handle -> will return failed
ext4_xattr_delete_inode
ext4_journal_ensure_credits
ext4_journal_ensure_credits_fn
__ext4_journal_ensure_credits
jbd2_handle_buffer_credits
journal = handle->h_transaction->t_journal; ->null-ptr-deref
Now, indirect truncate process didn't handle error. To solve this issue
maybe simply add check handle is abort in '__ext4_journal_ensure_credits'
is enough, and i also think this is necessary.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20211224100341.3299128-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
It is not guaranteed that __ext4_get_inode_loc will definitely set
err_blk pointer when it returns EIO. To avoid using uninitialized
variables, let's first set err_blk to 0.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211201163421.2631661-1-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
We found on older kernel (3.10) that in the scenario of insufficient
disk space, system may trigger an ABBA deadlock problem, it seems that
this problem still exists in latest kernel, try to fix it here. The
main process triggered by this problem is that task A occupies the PA
and waits for the jbd2 transaction finish, the jbd2 transaction waits
for the completion of task B's IO (plug_list), but task B waits for
the release of PA by task A to finish discard, which indirectly forms
an ABBA deadlock. The related calltrace is as follows:
Task A
vfs_write
ext4_mb_new_blocks()
ext4_mb_mark_diskspace_used() JBD2
jbd2_journal_get_write_access() -> jbd2_journal_commit_transaction()
->schedule() filemap_fdatawait()
| |
| Task B |
| do_unlinkat() |
| ext4_evict_inode() |
| jbd2_journal_begin_ordered_truncate() |
| filemap_fdatawrite_range() |
| ext4_mb_new_blocks() |
-ext4_mb_discard_group_preallocations() <-----
Here, try to cancel ext4_mb_discard_group_preallocations() internal
retry due to PA busy, and do a limited number of retries inside
ext4_mb_discard_preallocations(), which can circumvent the above
problems, but also has some advantages:
1. Since the PA is in a busy state, if other groups have free PAs,
keeping the current PA may help to reduce fragmentation.
2. Continue to traverse forward instead of waiting for the current
group PA to be released. In most scenarios, the PA discard time
can be reduced.
However, in the case of smaller free space, if only a few groups have
space, then due to multiple traversals of the group, it may increase
CPU overhead. But in contrast, I feel that the overall benefit is
better than the cost.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1637630277-23496-1-git-send-email-brookxu.cn@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
coccicheck complains about the use of snprintf() in sysfs show functions.
Fix the coccicheck warning:
WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1634095731-4528-1-git-send-email-wangqing@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When we succeed in enabling some quota type but fail to enable another
one with quota feature, we correctly disable all enabled quota types.
However we forget to reset i_data_sem lockdep class. When the inode gets
freed and reused, it will inherit this lockdep class (i_data_sem is
initialized only when a slab is created) and thus eventually lockdep
barfs about possible deadlocks.
Reported-and-tested-by: syzbot+3b6f9218b1301ddda3e2@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20211007155336.12493-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When we hit an error when enabling quotas and setting inode flags, we do
not properly shutdown quota subsystem despite returning error from
Q_QUOTAON quotactl. This can lead to some odd situations like kernel
using quota file while it is still writeable for userspace. Make sure we
properly cleanup the quota subsystem in case of error.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20211007155336.12493-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We got issue as follows when run syzkaller:
[ 167.936972] EXT4-fs error (device loop0): __ext4_remount:6314: comm rep: Abort forced by user
[ 167.938306] EXT4-fs (loop0): Remounting filesystem read-only
[ 167.981637] Assertion failure in ext4_getblk() at fs/ext4/inode.c:847: '(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) || handle != NULL || create == 0'
[ 167.983601] ------------[ cut here ]------------
[ 167.984245] kernel BUG at fs/ext4/inode.c:847!
[ 167.984882] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[ 167.985624] CPU: 7 PID: 2290 Comm: rep Tainted: G B 5.16.0-rc5-next-20211217+ #123
[ 167.986823] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
[ 167.988590] RIP: 0010:ext4_getblk+0x17e/0x504
[ 167.989189] Code: c6 01 74 28 49 c7 c0 a0 a3 5c 9b b9 4f 03 00 00 48 c7 c2 80 9c 5c 9b 48 c7 c6 40 b6 5c 9b 48 c7 c7 20 a4 5c 9b e8 77 e3 fd ff <0f> 0b 8b 04 244
[ 167.991679] RSP: 0018:ffff8881736f7398 EFLAGS: 00010282
[ 167.992385] RAX: 0000000000000094 RBX: 1ffff1102e6dee75 RCX: 0000000000000000
[ 167.993337] RDX: 0000000000000001 RSI: ffffffff9b6e29e0 RDI: ffffed102e6dee66
[ 167.994292] RBP: ffff88816a076210 R08: 0000000000000094 R09: ffffed107363fa09
[ 167.995252] R10: ffff88839b1fd047 R11: ffffed107363fa08 R12: ffff88816a0761e8
[ 167.996205] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000001
[ 167.997158] FS: 00007f6a1428c740(0000) GS:ffff88839b000000(0000) knlGS:0000000000000000
[ 167.998238] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 167.999025] CR2: 00007f6a140716c8 CR3: 0000000133216000 CR4: 00000000000006e0
[ 167.999987] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 168.000944] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 168.001899] Call Trace:
[ 168.002235] <TASK>
[ 168.007167] ext4_bread+0xd/0x53
[ 168.007612] ext4_quota_write+0x20c/0x5c0
[ 168.010457] write_blk+0x100/0x220
[ 168.010944] remove_free_dqentry+0x1c6/0x440
[ 168.011525] free_dqentry.isra.0+0x565/0x830
[ 168.012133] remove_tree+0x318/0x6d0
[ 168.014744] remove_tree+0x1eb/0x6d0
[ 168.017346] remove_tree+0x1eb/0x6d0
[ 168.019969] remove_tree+0x1eb/0x6d0
[ 168.022128] qtree_release_dquot+0x291/0x340
[ 168.023297] v2_release_dquot+0xce/0x120
[ 168.023847] dquot_release+0x197/0x3e0
[ 168.024358] ext4_release_dquot+0x22a/0x2d0
[ 168.024932] dqput.part.0+0x1c9/0x900
[ 168.025430] __dquot_drop+0x120/0x190
[ 168.025942] ext4_clear_inode+0x86/0x220
[ 168.026472] ext4_evict_inode+0x9e8/0xa22
[ 168.028200] evict+0x29e/0x4f0
[ 168.028625] dispose_list+0x102/0x1f0
[ 168.029148] evict_inodes+0x2c1/0x3e0
[ 168.030188] generic_shutdown_super+0xa4/0x3b0
[ 168.030817] kill_block_super+0x95/0xd0
[ 168.031360] deactivate_locked_super+0x85/0xd0
[ 168.031977] cleanup_mnt+0x2bc/0x480
[ 168.033062] task_work_run+0xd1/0x170
[ 168.033565] do_exit+0xa4f/0x2b50
[ 168.037155] do_group_exit+0xef/0x2d0
[ 168.037666] __x64_sys_exit_group+0x3a/0x50
[ 168.038237] do_syscall_64+0x3b/0x90
[ 168.038751] entry_SYSCALL_64_after_hwframe+0x44/0xae
In order to reproduce this problem, the following conditions need to be met:
1. Ext4 filesystem with no journal;
2. Filesystem image with incorrect quota data;
3. Abort filesystem forced by user;
4. umount filesystem;
As in ext4_quota_write:
...
if (EXT4_SB(sb)->s_journal && !handle) {
ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
" cancelled because transaction is not started",
(unsigned long long)off, (unsigned long long)len);
return -EIO;
}
...
We only check handle if NULL when filesystem has journal. There is need
check handle if NULL even when filesystem has no journal.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211223015506.297766-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
The kmemcache for ext4_fc_dentry_cachep remains registered after module
removal.
Destroy ext4_fc_dentry_cachep kmemcache on module removal.
Fixes: aa75f4d3daaeb ("ext4: main fast-commit commit path")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211110134640.lyku5vklvdndw6uk@linutronix.de
Link: https://lore.kernel.org/r/YbiK3JetFFl08bd7@linutronix.de
Link: https://lore.kernel.org/r/20211223164436.2628390-1-bigeasy@linutronix.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
If use FALLOC_FL_KEEP_SIZE to alloc unwritten range at bottom, the
inode->i_size will not include the unwritten range. When call
ftruncate with fast commit enabled, it will miss to track the
unwritten range.
Change to trace the full range during ftruncate.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223032337.5198-3-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
For now ,we use ext4_punch_hole() during fast commit replay delete range
procedure. But it will be affected by inode->i_size, which may not
correct during fast commit replay procedure. The following test will
failed.
-create & write foo (len 1000K)
-falloc FALLOC_FL_ZERO_RANGE foo (range 400K - 600K)
-create & fsync bar
-falloc FALLOC_FL_PUNCH_HOLE foo (range 300K-500K)
-fsync foo
-crash before a full commit
After the fast_commit reply procedure, the range 400K-500K will not be
removed. Because in this case, when calling ext4_punch_hole() the
inode->i_size is 0, and it just retruns with doing nothing.
Change to use ext4_ext_remove_space() instead of ext4_punch_hole()
to remove blocks of inode directly.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223032337.5198-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
when call falloc with FALLOC_FL_ZERO_RANGE, to set an range to unwritten,
which has been already initialized. If the range is align to blocksize,
fast commit will not track range for this change.
Also track range for unwritten range in ext4_map_blocks().
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211221022839.374606-1-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
This series takes care of a couple of TODOs and adds new ones. Update
the TODOs section to reflect current state and future work that needs
to happen.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223202140.2061101-5-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Move fast commit stats updating logic to a separate function from
ext4_fc_commit(). This significantly improves readability of
ext4_fc_commit().
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223202140.2061101-4-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch drops ext4_fc_start_ineligible() and
ext4_fc_stop_ineligible() APIs. Fast commit ineligible transactions
should simply call ext4_fc_mark_ineligible() after starting the
trasaction.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223202140.2061101-3-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch drops all calls to ext4_fc_start_update() and
ext4_fc_stop_update(). To ensure that there are no ongoing journal
updates during fast commit, we also make jbd2_fc_begin_commit() lock
journal for updates. This way we don't have to maintain two different
transaction start stop APIs for fast commit and full commit. This
patch doesn't remove the functions altogether since in future we want
to have inode level locking for fast commits.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223202140.2061101-2-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
i_version mount option is getting lost on remount. This is because the
'i_version' mount option differs from the util-linux mount option
'iversion', but it has exactly the same functionality. We have to
specifically notify the vfs that this is what we want by setting
appropriate flag in fc->sb_flags. Fix it and as a result we can remove
*flags argument from __ext4_remount(); do the same for
__ext4_fill_super().
In addition set out to deprecate ext4 specific 'i_version' mount option
in favor or 'iversion' by kernel version 5.20.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Fixes: cebe85d570cf ("ext4: switch to the new mount api")
Link: https://lore.kernel.org/r/20211222104517.11187-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The lazytime and nolazytime mount options were added temporarily back in
2015 with commit a26f49926da9 ("ext4: add optimization for the lazytime
mount option"). It think it has been enough time for the util-linux with
lazytime support to get widely used. Remove the mount options.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20211222104517.11187-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Switching to the new mount api introduced inconsistency in how the
journalling mode mount option (data=) is handled during a remount.
Ext4 always prevented changing the journalling mode during the remount,
however the new code always fails the remount when the journalling mode
is specified, even if it remains unchanged. Fix it.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: cebe85d570cf ("ext4: switch to the new mount api")
Link: https://lore.kernel.org/r/20211220152657.101599-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Remove unused match_table_t, slim down mount_opts structure by removing
unnecessary definitions, remove redundant MOPT_ flags and clean up
ext4_parse_param() by converting the most of the if/else branching to
switch except for the MOPT_SET/MOPT_CEAR handling.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-14-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Add the necessary functions for the fs_context_operations. Convert and
rename ext4_remount() and ext4_fill_super() to ext4_get_tree() and
ext4_reconfigure() respectively and switch the ext4 to use the new api.
One user facing change is the fact that we no longer have access to the
entire string of mount options provided by mount(2) since the mount api
does not store it anywhere. As a result we can't print the options to
the log as we did in the past after the successful mount.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-13-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Change token2str() to use ext4_param_specs instead of tokens so that we
can get rid of tokens entirely.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-12-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Clean up return values in handle_mount_opt() and rename the function to
ext4_parse_param()
Now we can use it in fs_context_operations as .parse_param.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-11-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The new mount api separates option parsing and super block setup into
two distinct steps and so we need to separate the options parsing out of
the ext4_fill_super() and ext4_remount().
In order to achieve this we have to create new ext4_fill_super() and
ext4_remount() functions which will serve its purpose only until we
actually do convert to the new api (as such they are only temporary for
this patch series) and move the option parsing out of the old function
which will now be renamed to __ext4_fill_super() and __ext4_remount().
There is a small complication in the fact that while the mount option
parsing is going to happen before we get to __ext4_fill_super(), the
mount options stored in the super block itself needs to be applied
first, before the user specified mount options.
So with this patch we're going through the following sequence:
- parse user provided options (including sb block)
- initialize sbi and store s_sb_block if provided
- in __ext4_fill_super()
- read the super block
- parse and apply options specified in s_mount_opts
- check and apply user provided options stored in ctx
- continue with the regular ext4_fill_super operation
It's not exactly the most elegant solution, but if we still want to
support s_mount_opts we have to do it in this order.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
At the parsing phase of mount in the new mount api sb will not be
available. We've already removed some uses of sb and sbi, but now we
need to get rid of the rest of it.
Use ext4_fs_context to store all of the configuration specification so
that it can be later applied to the super block and sbi.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-9-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
At the parsing phase of mount in the new mount api sb will not be
available so move ext2/3 compatibility check outside handle_mount_opt().
Unfortunately we will lose the ability to show exactly which option is
not compatible.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-8-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
At the parsing phase of mount in the new mount api sb will not be
available so move quota confiquration out of handle_mount_opt() by
noting the quota file names in the ext4_fs_context structure to be
able to apply it later.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-7-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
At the parsing phase of mount in the new mount api sb will not be
available so allow sb to be NULL in ext4_msg and use that in
handle_mount_opt().
Also change return value to appropriate -EINVAL where needed.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-6-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Use the new mount option specifications to parse the options in
handle_mount_opt(). However we're still using the old API to get the
options string.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-5-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Move option validation out of parse_options() into a separate function
ext4_validate_options().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-4-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Create an array of fs_parameter_spec called ext4_param_specs to
hold the mount option specifications we're going to be using with the
new mount api.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-3-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Allow parameter value to be empty by specifying fs_param_can_be_empty
flag.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Pull xfs fix from Darrick Wong:
"Remove an unnecessary (and backwards) rename flags check that
duplicates a VFS level check"
* tag 'xfs-5.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove incorrect ASSERT in xfs_rename
|
|
Pull cifs fixes from Steve French:
"Three SMB3 multichannel/fscache fixes and a DFS fix.
In testing multichannel reconnect scenarios recently various problems
with the cifs.ko implementation of fscache were found (e.g. incorrect
initialization of fscache cookies in some cases)"
* tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: avoid use of dstaddr as key for fscache client cookie
cifs: add server conn_id to fscache client cookie
cifs: wait for tcon resource_id before getting fscache super
cifs: fix missed refcounting of ipc tcon
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix preventing repeated retries of task_work based io-wq
thread creation, fixing a regression from when io-wq was made more (a
bit too much) resilient against signals"
* tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
io-wq: don't retry task_work creation failure on fatal conditions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- Since commit 486408d690e1 ("gfs2: Cancel remote delete work
asynchronously"), inode create and lookup-by-number can overlap more
easily and we can end up with temporary duplicate inodes. Fix the
code to prevent that.
- Fix a BUG demoting weak glock holders from a remote node.
* tag 'gfs2-v5.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: gfs2_create_inode rework
gfs2: gfs2_inode_lookup rework
gfs2: gfs2_inode_lookup cleanup
gfs2: Fix remote demote of weak glock holders
|
|
server->dstaddr can change when the DNS mapping for the
server hostname changes. But conn_id is a u64 counter
that is incremented each time a new TCP connection
is setup. So use only that as a key.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The fscache client cookie uses the server address
(and port) as the cookie key. This is a problem when
nosharesock is used. Two different connections will
use duplicate cookies. Avoid this by adding
server->conn_id to the key, so that it's guaranteed
that cookie will not be duplicated.
Also, for secondary channels of a session, copy the
fscache pointer from the primary channel. The primary
channel is guaranteed not to go away as long as secondary
channels are in use. Also addresses minor problem found
by kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The logic for initializing tcon->resource_id is done inside
cifs_root_iget. fscache super cookie relies on this for aux
data. So we need to push the fscache initialization to this
later point during mount.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix missed refcounting of IPC tcon used for getting domain-based DFS
root referrals. We want to keep it alive as long as mount is active
and can be refreshed. For standalone DFS root referrals it wouldn't
be a problem as the client ends up having an IPC tcon for both mount
and cache.
Fixes: c88f7dcd6d64 ("cifs: support nested dfs links over reconnect")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Jann Horn points out that there is another possible race wrt Unix domain
socket garbage collection, somewhat reminiscent of the one fixed in
commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK").
See the extended comment about the garbage collection requirements added
to unix_peek_fds() by that commit for details.
The race comes from how we can locklessly look up a file descriptor just
as it is in the process of being closed, and with the right artificial
timing (Jann added a few strategic 'mdelay(500)' calls to do that), the
Unix domain socket garbage collector could see the reference count
decrement of the close() happen before fget() took its reference to the
file and the file was attached onto a new file descriptor.
This is all (intentionally) correct on the 'struct file *' side, with
RCU lookups and lockless reference counting very much part of the
design. Getting that reference count out of order isn't a problem per
se.
But the garbage collector can get confused by seeing this situation of
having seen a file not having any remaining external references and then
seeing it being attached to an fd.
In commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK") the
fix was to serialize the file descriptor install with the garbage
collector by taking and releasing the unix_gc_lock.
That's not really an option here, but since this all happens when we are
in the process of looking up a file descriptor, we can instead simply
just re-check that the file hasn't been closed in the meantime, and just
re-do the lookup if we raced with a concurrent close() of the same file
descriptor.
Reported-and-tested-by: Jann Horn <jannh@google.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We don't want to be retrying task_work creation failure if there's
an actual signal pending for the parent task. If we do, then we can
enter an infinite loop of perpetually retrying and each retry failing
with -ERESTARTNOINTR because a signal is pending.
Fixes: 3146cba99aa2 ("io-wq: make worker creation resilient against signals")
Reported-by: Florian Fischer <florian.fl.fischer@fau.de>
Link: https://lore.kernel.org/io-uring/20211202165606.mqryio4yzubl7ms5@pasture/
Tested-by: Florian Fischer <florian.fl.fischer@fau.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When gfs2_lookup_by_inum() calls gfs2_inode_lookup() for an uncached
inode, gfs2_inode_lookup() will place a new tentative inode into the
inode cache before verifying that there is a valid inode at the given
address. This can race with gfs2_create_inode() which doesn't check for
duplicates inodes. gfs2_create_inode() will try to assign the new inode
to the corresponding inode glock, and glock_set_object() will complain
that the glock is still in use by gfs2_inode_lookup's tentative inode.
We noticed this bug after adding commit 486408d690e1 ("gfs2: Cancel
remote delete work asynchronously") which allowed delete_work_func() to
race with gfs2_create_inode(), but the same race exists for
open-by-handle.
Fix that by switching from insert_inode_hash() to
insert_inode_locked4(), which does check for duplicate inodes. We know
we've just managed to to allocate the new inode, so an inode tentatively
created by gfs2_inode_lookup() will eventually go away and
insert_inode_locked4() will always succeed.
In addition, don't flush the inode glock work anymore (this can now only
make things worse) and clean up glock_{set,clear}_object for the inode
glock somewhat.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
