| Age | Commit message (Collapse) | Author |
|---|
|
Commit 8fa7292fee5c ("treewide: Switch/rename to timer_delete[_sync]()")
switched del_timer_sync to timer_delete_sync, but did not modify the
comment for bnad_dim_timeout(). Now fix it.
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/61DDCE7AB5B6CE82+20250411101736.160981-1-wangyuli@uniontech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Airoha AN7581 SoC ship with a Switch based on the MT753x Switch embedded
in other SoC like the MT7581 and the MT7988. Similar to these they
require configuring some pin to enable LED PHYs.
Add support for the PHY ID for the Airoha embedded Switch and define a
simple probe function to toggle these pins. Also fill the LED functions
and add dedicated function to define LED polarity.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250410100410.348-2-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When commit 462a3daad679 ("net: phy: mediatek: fix compile-test
dependencies") fixed the dependency, it should have also introduced
an or on COMPILE_TEST to permit this driver to be compile-tested even if
NVMEM_MTK_EFUSE wasn't selected. The driver makes use of NVMEM API that
are always compiled (return error) so the driver can actually be
compiled even without that config.
Fix and simplify the dependency condition of this kernel config.
Fixes: 462a3daad679 ("net: phy: mediatek: fix compile-test dependencies")
Acked-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250410100410.348-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to mtk driver, introduce the capability to offload L2 traffic
defining flower rules in the PSE/PPE engine available on EN7581 SoC.
Since the hw always reports L2/L3/L4 flower rules, link all L2 rules
sharing the same L2 info (with different L3/L4 info) in the L2 subflows
list of a given L2 PPE entry.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250409-airoha-flowtable-l2b-v2-2-4a1e3935ea92@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce l2_flows rhashtable in airoha_ppe struct in order to
store L2 flows committed by upper layers of the kernel. This is a
preliminary patch in order to offload L2 traffic rules.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250409-airoha-flowtable-l2b-v2-1-4a1e3935ea92@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
EN8811H outputs 25MHz or 50MHz clocks on CKO, selected by GPIO3.
CKO clock operates continuously from power-up through md32 loading.
Implement clk provider driver so we can disable the clock output in case
it isn't needed, which also helps to reduce EMF noise
Signed-off-by: Lucien.Jheng <lucienx123@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250409150902.3596-1-lucienx123@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some stm32 implementations need the receive clock running in suspend,
as indicated by dwmac->ops->clk_rx_enable_in_suspend. The existing
code achieved this in a rather complex way, by passing a flag around.
However, the clk API prepare/enables are counted - which means that a
clock won't be stopped as long as there are more prepare and enables
than disables and unprepares, just like a reference count.
Therefore, we can simplify this logic by calling clk_prepare_enable()
an additional time in the probe function if this flag is set, and then
balancing that at remove time.
With this, we can avoid passing a "are we suspending" and "are we
resuming" flag to various functions in the driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The integrated PHY's of RTL8125/8126 have an own mechanism to access
PHY parameters, similar to what r8168g_phy_param does on earlier PHY
versions. Add helper rtl8125_phy_param to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/847b7356-12d6-441b-ade9-4b6e1539b84a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a helper for the Realtek-specific mechanism for accessing extended
config space if native access isn't possible.
This avoids code duplication.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/b368fd91-57d7-4cb5-9342-98b4d8fe9aea@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ASIX AX88772B based USB 10/100 Ethernet adapter doesn't come
up ("carrier off"), despite the built-in 100BASE-FX PHY positive link
indication. The internal PHY is configured (using EEPROM) in fixed
100 Mbps full duplex mode.
The primary problem appears to be using carrier_netif_{on,off}() while,
at the same time, delegating carrier management to phylink. Use only the
latter and remove "manual control" in the asix driver.
I don't have any other AX88772 board here, but the problem doesn't seem
specific to a particular board or settings - it's probably
timing-dependent.
Remove unused asix_adjust_link() as well.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/m3plhmdfte.fsf_-_@t19.piap.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u2QO9-001Rp8-Ii@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide a generic way to find a clock in the bulk data.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u2QO4-001Rp2-Dy@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc2).
Conflict:
Documentation/networking/netdevices.rst
net/core/lock_debug.c
04efcee6ef8d ("net: hold instance lock during NETDEV_CHANGE")
03df156dd3a6 ("xdp: double protect netdev->xdp_flags with netdev->lock")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink()
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr()
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority"
* tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ethtool: cmis_cdb: Fix incorrect read / write length extension
selftests: netfilter: add test case for recent mismatch bug
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
net: ppp: Add bound checking for skb data on ppp_sync_txmung
net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod.
ipv6: Align behavior across nexthops during path selection
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend()
selftests/tc-testing: sfq: check that a derived limit of 1 is rejected
net_sched: sch_sfq: move the limit validation
net_sched: sch_sfq: use a temporary work area for validating configuration
net: libwx: handle page_pool_dev_alloc_pages error
selftests: mptcp: validate MPJoin HMacFailure counters
mptcp: only inc MPJoinAckHMacFailure for HMAC failures
rtnetlink: Fix bad unlock balance in do_setlink().
net: ethtool: Don't call .cleanup_data when prepare_data fails
tc: Ensure we have enough buffer space when sending filter netlink notifications
net: libwx: Fix the wrong Rx descriptor field
octeontx2-pf: qos: fix VF root node parent queue index
selftests: tls: check that disconnect does nothing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A simple fix adding the module description of the Xenbus frontend
module
- A fix correcting the xen-acpi-processor Kconfig dependency for PVH
Dom0 support
- A fix for the Xen balloon driver when running as Xen Dom0 in PVH mode
- A fix for PVH Dom0 in order to avoid problems with CPU idle and
frequency drivers conflicting with Xen
* tag 'for-linus-6.15a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: disable CPU idle and frequency drivers for PVH dom0
x86/xen: fix balloon target initialization for PVH dom0
xen: Change xen-acpi-processor dom0 dependency
xenbus: add module description
|
|
Pull block fixes from Jens Axboe:
- Add a missing ublk selftest script, from test additions added last
week
- Two fixes for ublk error recovery and reissue
- Cleanup of ublk argument passing
* tag 'block-6.15-20250410' of git://git.kernel.dk/linux:
ublk: pass ublksrv_ctrl_cmd * instead of io_uring_cmd *
ublk: don't fail request for recovery & reissue in case of ubq->canceling
ublk: fix handling recovery & reissue in ublk_abort_queue()
selftests: ublk: fix test_stripe_04
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix resource handling in gpio-tegra186
- fix wakeup source leaks in gpio-mpc8xxx and gpio-zynq
- fix minor issues with some GPIO OF quirks
- deprecate GPIOD_FLAGS_BIT_NONEXCLUSIVE and devm_gpiod_unhinge()
symbols and add a TODO task to track replacing them with a better
solution
* tag 'gpio-fixes-for-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: of: Move Atmel HSMCI quirk up out of the regulator comment
gpiolib: of: Fix the choice for Ingenic NAND quirk
gpio: zynq: Fix wakeup source leaks on device unbind
gpio: mpc8xxx: Fix wakeup source leaks on device unbind
gpio: TODO: track the removal of regulator-related workarounds
MAINTAINERS: add more keywords for the GPIO subsystem entry
gpio: deprecate devm_gpiod_unhinge()
gpio: deprecate the GPIOD_FLAGS_BIT_NONEXCLUSIVE flag
gpio: tegra186: fix resource handling in ACPI probe path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Two important fixes: the build of the SPI NAND layer with old GCC
versions as well as the fix of the Qpic Makefile which was wrong in
the first place.
There are also two smaller fixes about a missing error and status
check"
* tag 'mtd/fixes-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spinand: Fix build with gcc < 7.5
mtd: rawnand: Add status chack in r852_ready()
mtd: inftlcore: Add error check for inftl_read_oob()
mtd: nand: Drop explicit test for built-in CONFIG_SPI_QPIC_SNAND
|
|
Ensure we have enough data in linear buffer from skb before accessing
initial bytes. This prevents potential out-of-bounds accesses
when processing short packets.
When ppp_sync_txmung receives an incoming package with an empty
payload:
(remote) gef➤ p *(struct pppoe_hdr *) (skb->head + skb->network_header)
$18 = {
type = 0x1,
ver = 0x1,
code = 0x0,
sid = 0x2,
length = 0x0,
tag = 0xffff8880371cdb96
}
from the skb struct (trimmed)
tail = 0x16,
end = 0x140,
head = 0xffff88803346f400 "4",
data = 0xffff88803346f416 ":\377",
truesize = 0x380,
len = 0x0,
data_len = 0x0,
mac_len = 0xe,
hdr_len = 0x0,
it is not safe to access data[2].
Reported-by: syzbot+29fc8991b0ecb186cf40@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=29fc8991b0ecb186cf40
Tested-by: syzbot+29fc8991b0ecb186cf40@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Arnaud Lecomte <contact@arnaud-lcm.com>
Link: https://patch.msgid.link/20250408-bound-checking-ppp_txmung-v2-1-94bb6e1b92d0@arnaud-lcm.com
[pabeni@redhat.com: fixed subj typo]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add sriov_configure for driver ops.
Add mailbox handler wx_msg_task for txgbe.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/ECDC57CF4F2316B9+20250408091556.9640-7-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add sriov_configure for driver ops.
Add mailbox handler wx_msg_task for ngbe in
the interrupt handler.
Add the notification flow when the vfs exist.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/C9A0A43732966022+20250408091556.9640-6-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement wx_msg_task which is used to process mailbox
messages sent by vf.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/8257B39B95CDB469+20250408091556.9640-5-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reallocate queue and int resources when sriov is enabled.
Redefine macro VMDQ to make it work in VT mode.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/64B616774ABE3C5A+20250408091556.9640-4-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement sriov_configure interface for wangxun nics in libwx.
Enable VT mode and initialize vf control structure, when sriov
is enabled. Do not be allowed to disable sriov when vfs are
assigned.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/81EA45C21B0A98B0+20250408091556.9640-3-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implements the mailbox interfaces for wangxun pf drivers
ngbe and txgbe.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/70017BD4D67614A4+20250408091556.9640-2-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is desireable to push the hardware accelerator to also
process non-segmented TCP frames: we pass the skb->len
to the "TOE/TSO" offloader and it will handle them.
Without this quirk the driver becomes unstable and lock
up and and crash.
I do not know exactly why, but it is probably due to the
TOE (TCP offload engine) feature that is coupled with the
segmentation feature - it is not possible to turn one
part off and not the other, either both TOE and TSO are
active, or neither of them.
Not having the TOE part active seems detrimental, as if
that hardware feature is not really supposed to be turned
off.
The datasheet says:
"Based on packet parsing and TCP connection/NAT table
lookup results, the NetEngine puts the packets
belonging to the same TCP connection to the same queue
for the software to process. The NetEngine puts
incoming packets to the buffer or series of buffers
for a jumbo packet. With this hardware acceleration,
IP/TCP header parsing, checksum validation and
connection lookup are offloaded from the software
processing."
After numerous tests with the hardware locking up after
something between minutes and hours depending on load
using iperf3 I have concluded this is necessary to stabilize
the hardware.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250408-gemini-ethernet-tso-always-v1-1-e669f932359c@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
txq_trans_update() currently uses txq->xmit_lock_owner
to conditionally update txq->trans_start.
For regular devices, txq->xmit_lock_owner is updated
from HARD_TX_LOCK() and HARD_TX_UNLOCK(), and this apparently
causes cpu stalls.
Using dev->lltx, which sits in a read-mostly cache-line,
and already used in HARD_TX_LOCK() and HARD_TX_UNLOCK()
helps cpu prediction.
On an AMD EPYC 7B12 dual socket server, tcp_rr with 128 threads
and 30,000 flows gets a 5 % increase in throughput.
As explained in commit 95ecba62e2fd ("net: fix races in
netdev_tx_sent_queue()/dev_watchdog()") I am planning
to no longer update txq->trans_start in the fast path
in a followup patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250408202742.2145516-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cn10k_free_matchall_ipolicer() calls the cn10k_map_unmap_rq_policer()
for each queue in a for loop without checking for any errors.
Check the return value of the cn10k_map_unmap_rq_policer() function during
each loop, and report a warning if the function fails.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250408032602.2909-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phylink-controlled PHY
DSA has 2 kinds of drivers:
1. Those who call dsa_switch_suspend() and dsa_switch_resume() from
their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz
2. Those who don't: all others. The above methods should be optional.
For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(),
and dsa_switch_resume() calls dsa_user_resume() -> phylink_start().
These seem good candidates for setting mac_managed_pm = true because
that is essentially its definition [1], but that does not seem to be the
biggest problem for now, and is not what this change focuses on.
Talking strictly about the 2nd category of DSA drivers here (which
do not have MAC managed PM, meaning that for their attached PHYs,
mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),
I have noticed that the following warning from mdio_bus_phy_resume() is
triggered:
WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
phydev->state != PHY_UP);
because the PHY state machine is running.
It's running as a result of a previous dsa_user_open() -> ... ->
phylink_start() -> phy_start() having been initiated by the user.
The previous mdio_bus_phy_suspend() was supposed to have called
phy_stop_machine(), but it didn't. So this is why the PHY is in state
PHY_NOLINK by the time mdio_bus_phy_resume() runs.
mdio_bus_phy_suspend() did not call phy_stop_machine() because for
phylink, the phydev->adjust_link function pointer is NULL. This seems a
technicality introduced by commit fddd91016d16 ("phylib: fix PAL state
machine restart on resume"). That commit was written before phylink
existed, and was intended to avoid crashing with consumer drivers which
don't use the PHY state machine - phylink always does, when using a PHY.
But phylink itself has historically not been developed with
suspend/resume in mind, and apparently not tested too much in that
scenario, allowing this bug to exist unnoticed for so long. Plus, prior
to the WARN_ON(), it would have likely been invisible.
This issue is not in fact restricted to type 2 DSA drivers (according to
the above ad-hoc classification), but can be extrapolated to any MAC
driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where
the issue was reported. Assuming mac_managed_pm is set correctly, a
quick search indicates the following other drivers might be affected:
$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm
drivers/net/ethernet/atheros/ag71xx.c
drivers/net/ethernet/microchip/sparx5/sparx5_main.c
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/freescale/ucc_geth.c
drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
drivers/net/ethernet/marvell/mvneta.c
drivers/net/ethernet/marvell/prestera/prestera_main.c
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/altera/altera_tse_main.c
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
drivers/net/ethernet/tehuti/tn40_phy.c
drivers/net/ethernet/mscc/ocelot_net.c
Make the existing conditions dependent on the PHY device having a
phydev->phy_link_change() implementation equal to the default
phy_link_change() provided by phylib. Otherwise, we implicitly know that
the phydev has the phylink-provided phylink_phy_change() callback, and
when phylink is used, the PHY state machine always needs to be stopped/
started on the suspend/resume path. The code is structured as such that
if phydev->phy_link_change() is absent, it is a matter of time until the
kernel will crash - no need to further complicate the test.
Thus, for the situation where the PM is not managed by the MAC, we will
make the MDIO bus PM ops treat identically the phylink-controlled PHYs
with the phylib-controlled PHYs where an adjust_link() callback is
supplied. In both cases, the MDIO bus PM ops should stop and restart the
PHY state machine.
[1] https://lore.kernel.org/netdev/Z-1tiW9zjcoFkhwc@shell.armlinux.org.uk/
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Reported-by: Wei Fang <wei.fang@nxp.com>
Tested-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250407094042.2155633-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In an upcoming change, mdio_bus_phy_may_suspend() will need to
distinguish a phylib-based PHY client from a phylink PHY client.
For that, it will need to compare the phydev->phy_link_change() function
pointer with the eponymous phy_link_change() provided by phylib.
To avoid forward function declarations, the default PHY link state
change method should be moved upwards. There is no functional change
associated with this patch, it is only to reduce the noise from a real
bug fix.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250407093900.2155112-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The __get_unaligned_cpu32 function is deprecated. So, replace it with
the more generic get_unaligned and just cast the input parameter.
Signed-off-by: Julian Vetter <julian@outer-limits.org>
Link: https://patch.msgid.link/20250408091946.2266271-1-julian@outer-limits.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The __get_unaligned_cpu32 function is deprecated. So, replace it with
the more generic get_unaligned and just cast the input parameter.
Signed-off-by: Julian Vetter <julian@outer-limits.org>
Link: https://patch.msgid.link/20250408091548.2263911-1-julian@outer-limits.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Protect xdp_features with netdev->lock. This way pure readers
no longer have to take rtnl_lock to access the field.
This includes calling NETDEV_XDP_FEAT_CHANGE under the lock.
Looks like that's fine for bonding, the only "real" listener,
it's the same as ethtool feature change.
In terms of normal drivers - only GVE need special consideration
(other drivers don't use instance lock or don't support XDP).
It calls xdp_set_features_flag() helper from gve_init_priv() which
in turn is called from gve_reset_recovery() (locked), or prior
to netdev registration. So switch to _locked.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Harshitha Ramamurthy <hramamurthy@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250408195956.412733-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ublk_ctrl_*() handlers all take struct io_uring_cmd *cmd but only
use it to get struct ublksrv_ctrl_cmd *header from the io_uring SQE.
Since the caller ublk_ctrl_uring_cmd() has already computed header, pass
it instead of cmd.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250409012928.3527198-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ubq->canceling is set with request queue quiesced when io_uring context is
exiting. USER_RECOVERY or !RECOVERY_FAIL_IO requires request to be re-queued
and re-dispatch after device is recovered.
However commit d796cea7b9f3 ("ublk: implement ->queue_rqs()") still may fail
any request in case of ubq->canceling, this way breaks USER_RECOVERY or
!RECOVERY_FAIL_IO.
Fix it by calling __ublk_abort_rq() in case of ubq->canceling.
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Reported-by: Uday Shankar <ushankar@purestorage.com>
Closes: https://lore.kernel.org/linux-block/Z%2FQkkTRHfRxtN%2FmB@dev-ushankar.dev.purestorage.com/
Fixes: d796cea7b9f3 ("ublk: implement ->queue_rqs()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250409011444.2142010-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 8284066946e6 ("ublk: grab request reference when the request is handled
by userspace") doesn't grab request reference in case of recovery reissue.
Then the request can be requeued & re-dispatch & failed when canceling
uring command.
If it is one zc request, the request can be freed before io_uring
returns the zc buffer back, then cause kernel panic:
[ 126.773061] BUG: kernel NULL pointer dereference, address: 00000000000000c8
[ 126.773657] #PF: supervisor read access in kernel mode
[ 126.774052] #PF: error_code(0x0000) - not-present page
[ 126.774455] PGD 0 P4D 0
[ 126.774698] Oops: Oops: 0000 [#1] SMP NOPTI
[ 126.775034] CPU: 13 UID: 0 PID: 1612 Comm: kworker/u64:55 Not tainted 6.14.0_blk+ #182 PREEMPT(full)
[ 126.775676] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014
[ 126.776275] Workqueue: iou_exit io_ring_exit_work
[ 126.776651] RIP: 0010:ublk_io_release+0x14/0x130 [ublk_drv]
Fixes it by always grabbing request reference for aborting the request.
Reported-by: Caleb Sander Mateos <csander@purestorage.com>
Closes: https://lore.kernel.org/linux-block/CADUfDZodKfOGUeWrnAxcZiLT+puaZX8jDHoj_sfHZCOZwhzz6A@mail.gmail.com/
Fixes: 8284066946e6 ("ublk: grab request reference when the request is handled by userspace")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250409011444.2142010-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
page_pool_dev_alloc_pages could return NULL. There was a WARN_ON(!page)
but it would still proceed to use the NULL pointer and then crash.
This is similar to commit 001ba0902046
("net: fec: handle page_pool_dev_alloc_pages error").
This is found by our static analysis tool KNighter.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250407184952.2111299-1-chenyuan0y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA
- Use acquire/release semantics in the KVM FF-A proxy to avoid
reading a stale value for the FF-A version
- Fix KVM guest driver to match PV CPUID hypercall ABI
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work
s390:
- Don't use %pK for debug printing and tracepoints
x86:
- Use a separate subclass when acquiring KVM's per-CPU posted
interrupts wakeup lock in the scheduled out path, i.e. when adding
a vCPU on the list of vCPUs to wake, to workaround a false positive
deadlock. The schedule out code runs with a scheduler lock that the
wakeup handler takes in the opposite order; but it does so with
IRQs disabled and cannot run concurrently with a wakeup
- Explicitly zero-initialize on-stack CPUID unions
- Allow building irqbypass.ko as as module when kvm.ko is a module
- Wrap relatively expensive sanity check with KVM_PROVE_MMU
- Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
- Add more scenarios to the MONITOR/MWAIT test
- Add option to rseq test to override /dev/cpu_dma_latency
- Bring list of exit reasons up to date
- Cleanup Makefile to list once tests that are valid on all
architectures
Other:
- Documentation fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: arm64: Use acquire/release to communicate FF-A version negotiation
KVM: arm64: selftests: Explicitly set the page attrs to Inner-Shareable
KVM: arm64: selftests: Introduce and use hardware-definition macros
KVM: VMX: Use separate subclasses for PI wakeup lock to squash false positive
KVM: VMX: Assert that IRQs are disabled when putting vCPU on PI wakeup list
KVM: x86: Explicitly zero-initialize on-stack CPUID unions
KVM: Allow building irqbypass.ko as as module when kvm.ko is a module
KVM: x86/mmu: Wrap sanity check on number of TDP MMU pages with KVM_PROVE_MMU
KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency
KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
Documentation: kvm: remove KVM_CAP_MIPS_TE
Documentation: kvm: organize capabilities in the right section
Documentation: kvm: fix some definition lists
Documentation: kvm: drop "Capability" heading from capabilities
Documentation: kvm: give correct name for KVM_CAP_SPAPR_MULTITCE
Documentation: KVM: KVM_GET_SUPPORTED_CPUID now exposes TSC_DEADLINE
selftests: kvm: list once tests that are valid on all architectures
selftests: kvm: bring list of exit reasons up to date
selftests: kvm: revamp MONITOR/MWAIT tests
KVM: arm64: Don't translate FAR if invalid/unsafe
...
|
|
Let's pass the queue index to netif_napi_add_config() to preserve
per-NAPI config.
Test:
Set 100 to defer-hard-irqs (default is 0) and check the value after
link down & up.
$ cat /sys/class/net/enp39s0/napi_defer_hard_irqs
0
$ ./tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 65,
'ifindex': 2,
'irq': 29,
'irq-suspend-timeout': 0}]
$ sudo ./tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--do napi-set --json='{"id": 65, "defer-hard-irqs": 100}'
$ sudo ip link set enp39s0 down && sudo ip link set enp39s0 up
Without patch:
$ ./tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'defer-hard-irqs': 0, <------------------- Reset to 0
'gro-flush-timeout': 0,
'id': 66, <------------------------------- New ID
'ifindex': 2,
'irq': 29,
'irq-suspend-timeout': 0}]
With patch:
$ ./tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'defer-hard-irqs': 100, <--------------+-- Preserved
'gro-flush-timeout': 0, |
'id': 65, <----------------------------'
'ifindex': 2,
'irq': 29,
'irq-suspend-timeout': 0}]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com>
Link: https://patch.msgid.link/20250407164802.25184-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC cleanups from Eric Biggers:
"Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc: remove CONFIG_LIBCRC32C
lib/crc: document all the CRC library kconfig options
lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T
lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF
lib/crc: remove unnecessary prompt for CONFIG_CRC16
lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT
lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'
|
|
WX_RXD_IPV6EX was incorrectly defined in Rx ring descriptor. In fact, this
field stores the 802.1ad ID from which the packet was received. The wrong
definition caused the statistics rx_csum_offload_errors to fail to grow
when receiving the 802.1ad packet with incorrect checksum.
Fixes: ef4f3c19f912 ("net: wangxun: libwx add rx offload functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250407103322.273241-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use SPDX-License-Identifier accross all the files of the xgbe driver to
ensure compliance with Linux kernel standards, thus removing the
boiler-plate template license text.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407102913.3063691-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove the double negation and simplify the if condition.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250407091442.743478-1-thorsten.blum@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The __get_unaligned_cpu32 function is deprecated. So, replace it with
the more generic get_unaligned and just cast the input parameter.
Signed-off-by: Julian Vetter <julian@outer-limits.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407083306.1553921-1-julian@outer-limits.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If the destination buffer has a fixed length, strscpy_pad()
automatically determines its size using sizeof() when the argument is
omitted. This makes the explicit sizeof() calls unnecessary - remove
them.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250407082607.741919-2-thorsten.blum@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current code configures the Physical Function (PF) root node at TL1
and the Virtual Function (VF) root node at TL2.
This ensure at any given point of time PF traffic gets more priority.
PF root node
TL1
/ \
TL2 TL2 VF root node
/ \
TL3 TL3
/ \
TL4 TL4
/ \
SMQ SMQ
Due to a bug in the current code, the TL2 parent queue index on the
VF interface is not being configured, leading to 'SMQ Flush' errors
Fixes: 5e6808b4c68d ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407070341.2765426-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64: First batch of fixes for 6.15
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA.
- Use acquire/release semantics in the KVM FF-A proxy to avoid reading
a stale value for the FF-A version.
- Fix KVM guest driver to match PV CPUID hypercall ABI.
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work.
|
|
The regulator comment in of_gpio_set_polarity_by_property()
made on top of a couple of the cases, while Atmel HSMCI quirk
is not related to that. Make it clear by moving Atmel HSMCI
quirk up out of the scope of the regulator comment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250402122058.1517393-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The Ingenic NAND quirk has been added under CONFIG_LCD_HX8357 ifdeffery
which sounds quite wrong. Fix the choice for Ingenic NAND quirk
by wrapping it into own ifdeffery related to the respective driver.
Fixes: 3a7fd473bd5d ("mtd: rawnand: ingenic: move the GPIO quirk to gpiolib-of.c")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250402122058.1517393-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Device can be unbound, so driver must also release memory for the wakeup
source.
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406202245.53854-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
