summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-01-14wifi: mt76: mt7921: fix using incorrect group cipher after disconnection.Michael Lo
To avoid incorrect cipher after disconnection, we should do the key deletion process in this case. Fixes: e6db67fa871d ("wifi: mt76: ignore key disable commands") Signed-off-by: Michael Lo <michael.lo@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Tested-by: David Ruth <druth@chromium.org> Reviewed-by: David Ruth <druth@chromium.org> Link: https://patch.msgid.link/20240801024335.12981-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt76u_vendor_request: Do not print error messages when -EPROTOWangYuli
When initializing the network card, unplugging the device will trigger an -EPROTO error, resulting in a flood of error messages being printed frantically. The exception is printed as follows： mt76x2u 2-2.4:1.0: vendor request req:47 off:9018 failed:-71 mt76x2u 2-2.4:1.0: vendor request req:47 off:9018 failed:-71 ... It will continue to print more than 2000 times for about 5 minutes, causing the usb device to be unable to be disconnected. During this period, the usb port cannot recognize the new device because the old device has not disconnected. There may be other operating methods that cause -EPROTO, but -EPROTO is a low-level hardware error. It is unwise to repeat vendor requests expecting to read correct data. It is a better choice to treat -EPROTO and -ENODEV the same way. Similar to commit 9b0f100c1970 ("mt76: usb: process URBs with status EPROTO properly") do no schedule rx_worker for urb marked with status set -EPROTO. I also reproduced this situation when plugging and unplugging the device, and this patch is effective. Just do not vendor request again for urb marked with status set -EPROTO. Link: https://lore.kernel.org/all/531681bd-30f5-4a70-a156-bf8754b8e072@intel.com/ Link: https://lore.kernel.org/all/D4B9CC1FFC0CBAC3+20250105040607.154706-1-wangyuli@uniontech.com/ Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Co-developed-by: Xu Rao <raoxu@uniontech.com> Signed-off-by: Xu Rao <raoxu@uniontech.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> Link: https://patch.msgid.link/9DD7DE7AAB497CB7+20250113070241.63590-1-wangyuli@uniontech.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt7921: fix a potential scan no APsQuan Zhou
In multi-channel scenarios, the granted channel must be aborted before station remove. Otherwise, the firmware will be put into a wrong state, resulting in have chance to make subsequence scan no APs. With this patch, the granted channel will be always aborted before station remove. Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Reviewed-by: Sean Wang <sean.wang@mediatek.com> Tested-by: David Ruth <druth@chromium.org> Reviewed-by: David Ruth <druth@chromium.org> Link: https://patch.msgid.link/1ac1ae779db86d4012199a24ea2ca74050ed4af6.1721300411.git.quan.zhou@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: Fix EHT NSS radiotap reporting.Ben Greear
Wireshark and iwlwifi use zero-based NSS reporting, adjust mt76 to do the same. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://patch.msgid.link/20240909211238.3237111-2-greearb@candelatech.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt7996: Add eht radiotap tlvBen Greear
This duplicates what the 7925 driver is doing, wireshark seems to at least mostly decode it as expected. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://patch.msgid.link/20240909211238.3237111-1-greearb@candelatech.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt7915: Fix mesh scan on MT7916 DBDCNicolas Cavallari
commit c4f075582304 ("wifi: mt76: mt7915: fix command timeout in AP stop period") changes the behavior of mt7915_bss_info_changed() in mesh mode when enable_beacon becomes false: it calls mt7915_mcu_add_bss_info(..., false) and mt7915_mcu_add_sta(..., false) while the previous code didn't. These sends mcu commands that apparently confuse the firmware. This breaks scanning while in mesh mode on AsiaRF MT7916 DBDC-based cards: scanning works but no mesh frames get sent afterwards and the firmware seems to be hosed. It breaks on MT7916 DBDC but not on MT7915 DBDC. Fixes: c4f075582304 ("wifi: mt76: mt7915: fix command timeout in AP stop period") Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Link: https://patch.msgid.link/20240927085350.4594-1-nicolas.cavallari@green-communications.fr Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt7615: Convert comma to semicolonShen Lichuan
To ensure code clarity and prevent potential errors, it's advisable to employ the ';' as a statement separator, except when ',' are intentionally used for specific purposes. Signed-off-by: Shen Lichuan <shenlichuan@vivo.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patch.msgid.link/20240911034243.31596-1-shenlichuan@vivo.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt7925: fix off by one in mt7925_load_clc()Dan Carpenter
This comparison should be >= instead of > to prevent an out of bounds read and write. Fixes: 9679ca7326e5 ("wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clc") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/84bf5dd2-2fe3-4410-a7af-ae841e41082a@stanley.mountain Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt7921s: fix a potential firmware freeze during startupLeon Yen
The maximum command quota of the firmware may be exceeded because the command to retrieve the quota setting has not been taken into account. This patch considers not only the quota usage of the command retrieving quota settings but also limits the total quota usage. Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20240916060157.10157-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt792x: add P2P_DEVICE supportHao Zhang
Regist the NL80211_IFTYPE_P2P_DEVICE to support p2p device for mt792x chips Signed-off-by: Hao Zhang <hao.zhang.mediatek@gmail.com> Signed-off-by: allan.wang <allan.wang@mediatek.com> Signed-off-by: Ming Yen Hsieh <MingYen.Hsieh@mediatek.com> Link: https://patch.msgid.link/20240919081713.23787-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt7996: set correct background radar capabilityStanleyYP Wang
Some of the variants do not support background radar, so add a helper to report background radar capability. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/20240926032440.15978-3-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt7996: add support for more variantsShayne Chen
Current varaints supported: - mt7996 chipset: tri-band, 4+4+4 NSS, eFEM - mt7992 chipset: dual-band, 4+4 NSS, eFEM This patch adds support for the following variants: - mt7996 chipset: - tri-band, 4+4+4 NSS, iFEM - tri-band, 2+3+3 NSS, eFEM - tri-band, 2+3+3 NSS, iFEM - mt7992 chipset: - dual-band, 4+4 NSS, iFEM - dual-band, 4+4 NSS, with band0 iFEM and band1 eFEM - dual-band, 2+3 NSS, eFEM - dual-band, 2+3 NSS, iFEM Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/20240926032440.15978-2-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt7996: extend flexibility of mt7996_mcu_get_eeprom()Shayne Chen
Support passing customized buffer pointer and length to mt7996_mcu_get_eeprom(). This is the preparation for adding more variants support which needs to prefetch FEM module from efuse, and also fixes potential OOB issue when reading the last efuse block. Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/20240926032440.15978-1-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-10wifi: brcmfmac: Add missing Return: to function documentationJeff Johnson
Running 'scripts/kernel-doc -Wall -Werror -none' flagged the following kernel-doc issues: drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:823: warning: No description found for return value of 'brcmf_apsta_add_vif' drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:907: warning: No description found for return value of 'brcmf_mon_add_vif' drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7419: warning: No description found for return value of 'brcmf_setup_ifmodes' Add the missing 'Return:' tags to the kernel-doc of these functions. Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20250106-brcmfmac-kdoc-v1-1-ed72196e21a1@oss.qualcomm.com
2025-01-10wifi: iwlegacy: Remove unused il_get_single_channel_number()Dr. David Alan Gilbert
THe last use of il_get_single_channel_number() was removed in 2011 by commit dd6d2a8aef69 ("iwlegacy: remove reset rf infrastructure") when it was still called iwl_legacy_get_single_channel_number. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241226011355.135417-3-linux@treblig.org
2025-01-10wifi: iwlegacy: Remove unused il3945_calc_db_from_ratio()Dr. David Alan Gilbert
The last use of il3945_calc_db_from_ratio() was removed in 2010 by commit ed1b6e99b5e6 ("iwlwifi: remove noise reporting") when it was still called iwl3945_calc_db_from_ratio(). Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241226011355.135417-2-linux@treblig.org
2025-01-10wifi: rt2x00: Remove unused rfval valuesAriel Otilibili
The intention here is not clear but as this was already tested and matches vendor driver it's better not to change behavior even if it looks suspicious. So just remove the unused values. Coverity-ID: 1525307 Signed-off-by: Ariel Otilibili <ariel.otilibili-anieli@eurecom.fr> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> [kvalo@kernel.org: write commit message] Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241221124445.1094460-2-ariel.otilibili-anieli@eurecom.fr
2025-01-10wifi: brcmfmac: Check the return value of of_property_read_string_index()Stefan Dösinger
Somewhen between 6.10 and 6.11 the driver started to crash on my MacBookPro14,3. The property doesn't exist and 'tmp' remains uninitialized, so we pass a random pointer to devm_kstrdup(). The crash I am getting looks like this: BUG: unable to handle page fault for address: 00007f033c669379 PF: supervisor read access in kernel mode PF: error_code(0x0001) - permissions violation PGD 8000000101341067 P4D 8000000101341067 PUD 101340067 PMD 1013bb067 PTE 800000010aee9025 Oops: Oops: 0001 [#1] SMP PTI CPU: 4 UID: 0 PID: 827 Comm: (udev-worker) Not tainted 6.11.8-gentoo #1 Hardware name: Apple Inc. MacBookPro14,3/Mac-551B86E5744E2388, BIOS 529.140.2.0.0 06/23/2024 RIP: 0010:strlen+0x4/0x30 Code: f7 75 ec 31 c0 c3 cc cc cc cc 48 89 f8 c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 14 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 cc RSP: 0018:ffffb4aac0683ad8 EFLAGS: 00010202 RAX: 00000000ffffffea RBX: 00007f033c669379 RCX: 0000000000000001 RDX: 0000000000000cc0 RSI: 00007f033c669379 RDI: 00007f033c669379 RBP: 00000000ffffffea R08: 0000000000000000 R09: 00000000c0ba916a R10: ffffffffffffffff R11: ffffffffb61ea260 R12: ffff91f7815b50c8 R13: 0000000000000cc0 R14: ffff91fafefffe30 R15: ffffb4aac0683b30 FS: 00007f033ccbe8c0(0000) GS:ffff91faeed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f033c669379 CR3: 0000000107b1e004 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x149/0x4c0 ? raw_spin_rq_lock_nested+0xe/0x20 ? sched_balance_newidle+0x22b/0x3c0 ? update_load_avg+0x78/0x770 ? exc_page_fault+0x6f/0x150 ? asm_exc_page_fault+0x26/0x30 ? __pfx_pci_conf1_write+0x10/0x10 ? strlen+0x4/0x30 devm_kstrdup+0x25/0x70 brcmf_of_probe+0x273/0x350 [brcmfmac] Signed-off-by: Stefan Dösinger <stefan@codeweavers.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20250106170958.3595-1-stefan@codeweavers.com
2025-01-10wifi: wlcore: fix unbalanced pm_runtime callsAndreas Kemnade
If firmware boot failes, runtime pm is put too often: [12092.708099] wlcore: ERROR firmware boot failed despite 3 retries [12092.708099] wl18xx_driver wl18xx.1.auto: Runtime PM usage count underflow! Fix that by redirecting all error gotos before runtime_get so that runtime is not put. Fixes: c40aad28a3cf ("wlcore: Make sure firmware is initialized in wl1271_op_add_interface()") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Michael Nemanov <michael.nemanov@ti.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20250104195507.402673-1-akemnade@kernel.org
2025-01-10wifi: wilc1000: unregister wiphy only if it has been registeredAlexis Lothoré
There is a specific error path in probe functions in wilc drivers (both sdio and spi) which can lead to kernel panic, as this one for example when using SPI: Unable to handle kernel paging request at virtual address 9f000000 when read [9f000000] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: wilc1000_spi(+) crc_itu_t crc7 wilc1000 cfg80211 bluetooth ecdh_generic ecc CPU: 0 UID: 0 PID: 106 Comm: modprobe Not tainted 6.13.0-rc3+ #22 Hardware name: Atmel SAMA5 PC is at wiphy_unregister+0x244/0xc40 [cfg80211] LR is at wiphy_unregister+0x1c0/0xc40 [cfg80211] [...] wiphy_unregister [cfg80211] from wilc_netdev_cleanup+0x380/0x494 [wilc1000] wilc_netdev_cleanup [wilc1000] from wilc_bus_probe+0x360/0x834 [wilc1000_spi] wilc_bus_probe [wilc1000_spi] from spi_probe+0x15c/0x1d4 spi_probe from really_probe+0x270/0xb2c really_probe from __driver_probe_device+0x1dc/0x4e8 __driver_probe_device from driver_probe_device+0x5c/0x140 driver_probe_device from __driver_attach+0x220/0x540 __driver_attach from bus_for_each_dev+0x13c/0x1a8 bus_for_each_dev from bus_add_driver+0x2a0/0x6a4 bus_add_driver from driver_register+0x27c/0x51c driver_register from do_one_initcall+0xf8/0x564 do_one_initcall from do_init_module+0x2e4/0x82c do_init_module from load_module+0x59a0/0x70c4 load_module from init_module_from_file+0x100/0x148 init_module_from_file from sys_finit_module+0x2fc/0x924 sys_finit_module from ret_fast_syscall+0x0/0x1c The issue can easily be reproduced, for example by not wiring correctly a wilc device through SPI (and so, make it unresponsive to early SPI commands). It is due to a recent change decoupling wiphy allocation from wiphy registration, however wilc_netdev_cleanup has not been updated accordingly, letting it possibly call wiphy unregister on a wiphy which has never been registered. Fix this crash by moving wiphy_unregister/wiphy_free out of wilc_netdev_cleanup, and by adjusting error paths in both drivers Fixes: fbdf0c5248dc ("wifi: wilc1000: Register wiphy after reading out chipid") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241223-wilc_fix_probe_error_path-v1-1-91fa7bd8e5b6@bootlin.com
2025-01-10wifi: mt76: mt7996: fix invalid interface combinationsShayne Chen
Setting beacon_int_min_gcd and NL80211_IFTYPE_ADHOC in the same interface combination is invalid, which will trigger the following warning trace and get error returned from wiphy_register(). [ 10.080325] Call trace: [ 10.082761] wiphy_register+0xc4/0x76c [cfg80211] [ 10.087465] ieee80211_register_hw+0x800/0xac4 [mac80211] [ 10.092868] mt76_register_device+0x16c/0x2c0 [mt76] [ 10.097829] mt7996_register_device+0x740/0x844 [mt7996e] Fix this by removing unused adhoc iftype. Fixes: 948f65249868 ("wifi: mt76: mt7996: advertize beacon_int_min_gcd") Reported-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Tested-By: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241007135133.5336-1-shayne.chen@mediatek.com
2025-01-10Merge tag 'ipsec-next-2025-01-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== ipsec-next-2025-01-09 1) Implement the AGGFRAG protocol and basic IP-TFS (RFC9347) functionality. From Christian Hopps. 2) Support ESN context update to hardware for TX. From Jianbo Liu. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-10net: dsa: qca8k: Use of_property_present() for non-boolean propertiesRob Herring (Arm)
The use of of_property_read_bool() for non-boolean properties is deprecated in favor of of_property_present() when testing for property presence. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-09net: phy: micrel: use helper phy_disable_eeeHeiner Kallweit
Use helper phy_disable_eee() instead of setting phylib-internal bitmap eee_broken_modes directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/5e19eebe-121e-4a41-b36d-a35631279dd8@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09netconsole: Warn if MAX_USERDATA_ITEMS limit is exceededBreno Leitao
netconsole configfs helpers doesn't allow the creation of more than MAX_USERDATA_ITEMS items. Add a warning when netconsole userdata update function attempts sees more than MAX_USERDATA_ITEMS entries. Replace silent ignore mechanism with WARN_ON_ONCE() to highlight potential misuse during development and debugging. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-1-3d85eb091bec@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc7). Conflicts: a42d71e322a8 ("net_sched: sch_cake: Add drop reasons") 737d4d91d35b ("sched: sch_cake: add bounds checks to host bulk flow fairness counts") Adjacent changes: drivers/net/ethernet/meta/fbnic/fbnic.h 3a856ab34726 ("eth: fbnic: add IRQ reuse support") 95978931d55f ("eth: fbnic: Revert "eth: fbnic: Add hardware monitoring support via HWMON interface"") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09Merge tag 'net-6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, Bluetooth and WPAN. No outstanding fixes / investigations at this time. Current release - new code bugs: - eth: fbnic: revert HWMON support, it doesn't work at all and revert is similar size as the fixes Previous releases - regressions: - tcp: allow a connection when sk_max_ack_backlog is zero - tls: fix tls_sw_sendmsg error handling Previous releases - always broken: - netdev netlink family: - prevent accessing NAPI instances from another namespace - don't dump Tx and uninitialized NAPIs - net: sysctl: avoid using current->nsproxy, fix null-deref if task is exiting and stick to opener's netns - sched: sch_cake: add bounds checks to host bulk flow fairness counts Misc: - annual cleanup of inactive maintainers" * tag 'net-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) rds: sysctl: rds_tcp_{rcv,snd}buf: avoid using current->nsproxy sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy sctp: sysctl: udp_port: avoid using current->nsproxy sctp: sysctl: auth_enable: avoid using current->nsproxy sctp: sysctl: rto_min/max: avoid using current->nsproxy sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy mptcp: sysctl: blackhole timeout: avoid using current->nsproxy mptcp: sysctl: sched: avoid using current->nsproxy mptcp: sysctl: avail sched: remove write access MAINTAINERS: remove Lars Povlsen from Microchip Sparx5 SoC MAINTAINERS: remove Noam Dagan from AMAZON ETHERNET MAINTAINERS: remove Ying Xue from TIPC MAINTAINERS: remove Mark Lee from MediaTek Ethernet MAINTAINERS: mark stmmac ethernet as an Orphan MAINTAINERS: remove Andy Gospodarek from bonding MAINTAINERS: update maintainers for Microchip LAN78xx MAINTAINERS: mark Synopsys DW XPCS as Orphan net/mlx5: Fix variable not being completed when function returns rtase: Fix a check for error in rtase_alloc_msix() net: stmmac: dwmac-tegra: Read iommu stream id from device tree ...
2025-01-09enic: Fix typo in comment in table indexed by link speedJohn Daley
The RX adaptive interrupt moderation table is indexed by link speed range, where the last row of the table is the catch-all for all link speeds greater than 10Gbps. The comment said 10 - 40Gbps, but since there are now adapters with link speeds than 40Gbps, the comment is now wrong and should indicate it applies to all speeds greater than 10Gbps. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20250107214159.18807-4-johndale@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09enic: Obtain the Link speed only after the link comes upJohn Daley
The link speed is obtained in the RX adaptive coalescing function. It was being called at probe time when the link may not be up. Change the call to run after the Link comes up. The impact of not getting the correct link speed was that the low end of the adaptive interrupt range was always being set to 0 which could have caused a slight increase in the number of RX interrupts. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20250107214159.18807-3-johndale@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09enic: Move RX coalescing set functionJohn Daley
Move the function used for setting the RX coalescing range to before the function that checks the link status. It needs to be called from there instead of from the probe function. There is no functional change. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Link: https://patch.msgid.link/20250107214159.18807-2-johndale@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09net/mlx5: Fix variable not being completed when function returnsChenguang Zhao
When cmd_alloc_index(), fails cmd_work_handler() needs to complete ent->slotted before returning early. Otherwise the task which issued the command may hang: mlx5_core 0000:01:00.0: cmd_work_handler:877:(pid 3880418): failed to allocate command entry INFO: task kworker/13:2:4055883 blocked for more than 120 seconds. Not tainted 4.19.90-25.44.v2101.ky10.aarch64 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/13:2 D 0 4055883 2 0x00000228 Workqueue: events mlx5e_tx_dim_work [mlx5_core] Call trace: __switch_to+0xe8/0x150 __schedule+0x2a8/0x9b8 schedule+0x2c/0x88 schedule_timeout+0x204/0x478 wait_for_common+0x154/0x250 wait_for_completion+0x28/0x38 cmd_exec+0x7a0/0xa00 [mlx5_core] mlx5_cmd_exec+0x54/0x80 [mlx5_core] mlx5_core_modify_cq+0x6c/0x80 [mlx5_core] mlx5_core_modify_cq_moderation+0xa0/0xb8 [mlx5_core] mlx5e_tx_dim_work+0x54/0x68 [mlx5_core] process_one_work+0x1b0/0x448 worker_thread+0x54/0x468 kthread+0x134/0x138 ret_from_fork+0x10/0x18 Fixes: 485d65e13571 ("net/mlx5: Add a timeout to acquire the command queue semaphore") Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250108030009.68520-1-zhaochenguang@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09rtase: Fix a check for error in rtase_alloc_msix()Dan Carpenter
The pci_irq_vector() function never returns zero. It returns negative error codes or a positive non-zero IRQ number. Fix the error checking to test for negatives. Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/f2ecc88d-af13-4651-9820-7cc665230019@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09net: stmmac: dwmac-tegra: Read iommu stream id from device treeParker Newman
Nvidia's Tegra MGBE controllers require the IOMMU "Stream ID" (SID) to be written to the MGBE_WRAP_AXI_ASID0_CTRL register. The current driver is hard coded to use MGBE0's SID for all controllers. This causes softirq time outs and kernel panics when using controllers other than MGBE0. Example dmesg errors when an ethernet cable is connected to MGBE1: [ 116.133290] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 121.851283] tegra-mgbe 6910000.ethernet eth1: NETDEV WATCHDOG: CPU: 5: transmit queue 0 timed out 5690 ms [ 121.851782] tegra-mgbe 6910000.ethernet eth1: Reset adapter. [ 121.892464] tegra-mgbe 6910000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 121.905920] tegra-mgbe 6910000.ethernet eth1: PHY [stmmac-1:00] driver [Aquantia AQR113] (irq=171) [ 121.907356] tegra-mgbe 6910000.ethernet eth1: Enabling Safety Features [ 121.907578] tegra-mgbe 6910000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported [ 121.908399] tegra-mgbe 6910000.ethernet eth1: registered PTP clock [ 121.908582] tegra-mgbe 6910000.ethernet eth1: configuring for phy/10gbase-r link mode [ 125.961292] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 181.921198] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 181.921404] rcu: 7-....: (1 GPs behind) idle=540c/1/0x4000000000000002 softirq=1748/1749 fqs=2337 [ 181.921684] rcu: (detected by 4, t=6002 jiffies, g=1357, q=1254 ncpus=8) [ 181.921878] Sending NMI from CPU 4 to CPUs 7: [ 181.921886] NMI backtrace for cpu 7 [ 181.922131] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6 [ 181.922390] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024 [ 181.922658] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 181.922847] pc : handle_softirqs+0x98/0x368 [ 181.922978] lr : __do_softirq+0x18/0x20 [ 181.923095] sp : ffff80008003bf50 [ 181.923189] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000 [ 181.923379] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0 [ 181.924486] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70 [ 181.925568] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000 [ 181.926655] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000 [ 181.931455] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d [ 181.938628] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160 [ 181.945804] x8 : ffff8000827b3160 x7 : f9157b241586f343 x6 : eeb6502a01c81c74 [ 181.953068] x5 : a4acfcdd2e8096bb x4 : ffffce78ea277340 x3 : 00000000ffffd1e1 [ 181.960329] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000 [ 181.967591] Call trace: [ 181.970043] handle_softirqs+0x98/0x368 (P) [ 181.974240] __do_softirq+0x18/0x20 [ 181.977743] ____do_softirq+0x14/0x28 [ 181.981415] call_on_irq_stack+0x24/0x30 [ 181.985180] do_softirq_own_stack+0x20/0x30 [ 181.989379] __irq_exit_rcu+0x114/0x140 [ 181.993142] irq_exit_rcu+0x14/0x28 [ 181.996816] el1_interrupt+0x44/0xb8 [ 182.000316] el1h_64_irq_handler+0x14/0x20 [ 182.004343] el1h_64_irq+0x80/0x88 [ 182.007755] cpuidle_enter_state+0xc4/0x4a8 (P) [ 182.012305] cpuidle_enter+0x3c/0x58 [ 182.015980] cpuidle_idle_call+0x128/0x1c0 [ 182.020005] do_idle+0xe0/0xf0 [ 182.023155] cpu_startup_entry+0x3c/0x48 [ 182.026917] secondary_start_kernel+0xdc/0x120 [ 182.031379] __secondary_switched+0x74/0x78 [ 212.971162] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 7-.... } 6103 jiffies s: 417 root: 0x80/. [ 212.985935] rcu: blocking rcu_node structures (internal RCU debug): [ 212.992758] Sending NMI from CPU 0 to CPUs 7: [ 212.998539] NMI backtrace for cpu 7 [ 213.004304] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6 [ 213.016116] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024 [ 213.030817] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 213.040528] pc : handle_softirqs+0x98/0x368 [ 213.046563] lr : __do_softirq+0x18/0x20 [ 213.051293] sp : ffff80008003bf50 [ 213.055839] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000 [ 213.067304] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0 [ 213.077014] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70 [ 213.087339] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000 [ 213.097313] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000 [ 213.107201] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d [ 213.116651] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160 [ 213.127500] x8 : ffff8000827b3160 x7 : 0a37b344852820af x6 : 3f049caedd1ff608 [ 213.138002] x5 : cff7cfdbfaf31291 x4 : ffffce78ea277340 x3 : 00000000ffffde04 [ 213.150428] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000 [ 213.162063] Call trace: [ 213.165494] handle_softirqs+0x98/0x368 (P) [ 213.171256] __do_softirq+0x18/0x20 [ 213.177291] ____do_softirq+0x14/0x28 [ 213.182017] call_on_irq_stack+0x24/0x30 [ 213.186565] do_softirq_own_stack+0x20/0x30 [ 213.191815] __irq_exit_rcu+0x114/0x140 [ 213.196891] irq_exit_rcu+0x14/0x28 [ 213.202401] el1_interrupt+0x44/0xb8 [ 213.207741] el1h_64_irq_handler+0x14/0x20 [ 213.213519] el1h_64_irq+0x80/0x88 [ 213.217541] cpuidle_enter_state+0xc4/0x4a8 (P) [ 213.224364] cpuidle_enter+0x3c/0x58 [ 213.228653] cpuidle_idle_call+0x128/0x1c0 [ 213.233993] do_idle+0xe0/0xf0 [ 213.237928] cpu_startup_entry+0x3c/0x48 [ 213.243791] secondary_start_kernel+0xdc/0x120 [ 213.249830] __secondary_switched+0x74/0x78 This bug has existed since the dwmac-tegra driver was added in Dec 2022 (See Fixes tag below for commit hash). The Tegra234 SOC has 4 MGBE controllers, however Nvidia's Developer Kit only uses MGBE0 which is why the bug was not found previously. Connect Tech has many products that use 2 (or more) MGBE controllers. The solution is to read the controller's SID from the existing "iommus" device tree property. The 2nd field of the "iommus" device tree property is the controller's SID. Device tree snippet from tegra234.dtsi showing MGBE1's "iommus" property: smmu_niso0: iommu@12000000 { compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500"; ... } /* MGBE1 */ ethernet@6900000 { compatible = "nvidia,tegra234-mgbe"; ... iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>; ... } Nvidia's arm-smmu driver reads the "iommus" property and stores the SID in the MGBE device's "fwspec" struct. The dwmac-tegra driver can access the SID using the tegra_dev_iommu_get_stream_id() helper function found in linux/iommu.h. Calling tegra_dev_iommu_get_stream_id() should not fail unless the "iommus" property is removed from the device tree or the IOMMU is disabled. While the Tegra234 SOC technically supports bypassing the IOMMU, it is not supported by the current firmware, has not been tested and not recommended. More detailed discussion with Thierry Reding from Nvidia linked below. Fixes: d8ca113724e7 ("net: stmmac: tegra: Add MGBE support") Link: https://lore.kernel.org/netdev/cover.1731685185.git.pnewman@connecttech.com Signed-off-by: Parker Newman <pnewman@connecttech.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patch.msgid.link/6fb97f32cf4accb4f7cf92846f6b60064ba0a3bd.1736284360.git.pnewman@connecttech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09netdevsim: add debugfs-triggered queue resetJakub Kicinski
Support triggering queue reset via debugfs for an upcoming test. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09netdevsim: add queue management API supportJakub Kicinski
Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09netdevsim: add queue alloc/free helpersJakub Kicinski
We'll need the code to allocate and free queues in the queue management API, factor it out. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09netdevsim: allocate rqs individuallyJakub Kicinski
Make nsim->rqs an array of pointers and allocate them individually so that we can swap them out one by one. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09netdevsim: support NAPI configJakub Kicinski
Link the NAPI instances to their configs. This will be needed to test that NAPI config doesn't break list ordering. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09net/mlx5: use do_aux_work for PHC overflow checksVadim Fedorenko
The overflow_work is using system wq to do overflow checks and updates for PHC device timecounter, which might be overhelmed by other tasks. But there is dedicated kthread in PTP subsystem designed for such things. This patch changes the work queue to proper align with PTP subsystem and to avoid overloading system work queue. The adjfine() function acts the same way as overflow check worker, we can postpone ptp aux worker till the next overflow period after adjfine() was called. Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250107104812.380225-1-vadfed@meta.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09net: stmmac: Unexport stmmac_rx_offset() from stmmac.hFurong Xu
stmmac_rx_offset() is referenced in stmmac_main.c only, let's move it to stmmac_main.c. Drop the inline keyword by the way, it is better to let the compiler to decide. Compile tested only. No functional change intended. Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250107075448.4039925-1-0x1207@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09r8169: add support for RTL8125BP rev.bChunHao Lin
Add support for RTL8125BP rev.b. Its XID is 0x689. This chip supports DASH and its dash type is "RTL_DASH_25_BP". Signed-off-by: ChunHao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/20250107064355.104711-1-hau@realtek.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09mctp i3c: fix MCTP I3C driver multi-thread issueLeo Yang
We found a timeout problem with the pldm command on our system. The reason is that the MCTP-I3C driver has a race condition when receiving multiple-packet messages in multi-thread, resulting in a wrong packet order problem. We identified this problem by adding a debug message to the mctp_i3c_read function. According to the MCTP spec, a multiple-packet message must be composed in sequence, and if there is a wrong sequence, the whole message will be discarded and wait for the next SOM. For example, SOM → Pkt Seq #2 → Pkt Seq #1 → Pkt Seq #3 → EOM. Therefore, we try to solve this problem by adding a mutex to the mctp_i3c_read function. Before the modification, when a command requesting a multiple-packet message response is sent consecutively, an error usually occurs within 100 loops. After the mutex, it can go through 40000 loops without any error, and it seems to run well. Fixes: c8755b29b58e ("mctp i3c: MCTP I3C driver") Signed-off-by: Leo Yang <Leo-Yang@quantatw.com> Link: https://patch.msgid.link/20250107031529.3296094-1-Leo-Yang@quantatw.com [pabeni@redhat.com: dropped already answered question from changelog] Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-08Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-01-07 (ice, igc) For ice: Arkadiusz corrects mask value being used to determine DPLL phase range. Przemyslaw corrects frequency value for E823 devices. For igc: En-Wei Wu adds a check and, early, return for failed register read. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igc: return early when failing to read EECD register ice: fix incorrect PHY settings for 100 GB/s ice: fix max values for dpll pin phase adjust ==================== Link: https://patch.msgid.link/20250107190150.1758577-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08Merge tag 'for-net-2025-01-08' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btmtk: Fix failed to send func ctrl for MediaTek devices. - hci_sync: Fix not setting Random Address when required - MGMT: Fix Add Device to responding before completing - btnxpuart: Fix driver sending truncated data * tag 'for-net-2025-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: btmtk: Fix failed to send func ctrl for MediaTek devices. Bluetooth: btnxpuart: Fix driver sending truncated data Bluetooth: MGMT: Fix Add Device to responding before completing Bluetooth: hci_sync: Fix not setting Random Address when required ==================== Link: https://patch.msgid.link/20250108162627.1623760-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four driver fixes in UFS, mostly to do with power management" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: qcom: Power down the controller/device during system suspend for SM8550/SM8650 SoCs scsi: ufs: qcom: Allow passing platform specific OF data scsi: ufs: core: Honor runtime/system PM levels if set by host controller drivers scsi: ufs: qcom: Power off the PHY if it was already powered on in ufs_qcom_power_up_sequence()
2025-01-08net: hns3: fix kernel crash when 1588 is sent on HIP08 devicesJie Wang
Currently, HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL. But the tx process would still try to set hardware time stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash. [ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge] [ 128.292938] sp : ffff800059b93140 [ 128.297200] x29: ffff800059b93140 x28: 0000000000003280 [ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080 [ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001 [ 128.315969] x23: 0000000000000000 x22: 0000000000000194 [ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000 [ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000 [ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24 [ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000 [ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368 [ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02 [ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0 [ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000 [ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff [ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294 [ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080 [ 128.390626] Call trace: [ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3] [ 128.405468] xmit_one.constprop.0+0xc4/0x200 [ 128.410600] dev_hard_start_xmit+0x54/0xf0 [ 128.415556] sch_direct_xmit+0xe8/0x634 [ 128.420246] __dev_queue_xmit+0x224/0xc70 [ 128.425101] dev_queue_xmit+0x1c/0x40 [ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch] [ 128.435409] do_output+0x60/0x17c [openvswitch] [ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch] [ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch] [ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch] [ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch] [ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch] [ 128.471460] xmit_one.constprop.0+0xc4/0x200 [ 128.476561] dev_hard_start_xmit+0x54/0xf0 [ 128.481489] __dev_queue_xmit+0x968/0xc70 [ 128.486330] dev_queue_xmit+0x1c/0x40 [ 128.490856] ip_finish_output2+0x250/0x570 [ 128.495810] __ip_finish_output+0x170/0x1e0 [ 128.500832] ip_finish_output+0x3c/0xf0 [ 128.505504] ip_output+0xbc/0x160 [ 128.509654] ip_send_skb+0x58/0xd4 [ 128.513892] udp_send_skb+0x12c/0x354 [ 128.518387] udp_sendmsg+0x7a8/0x9c0 [ 128.522793] inet_sendmsg+0x4c/0x8c [ 128.527116] __sock_sendmsg+0x48/0x80 [ 128.531609] __sys_sendto+0x124/0x164 [ 128.536099] __arm64_sys_sendto+0x30/0x5c [ 128.540935] invoke_syscall+0x50/0x130 [ 128.545508] el0_svc_common.constprop.0+0x10c/0x124 [ 128.551205] do_el0_svc+0x34/0xdc [ 128.555347] el0_svc+0x20/0x30 [ 128.559227] el0_sync_handler+0xb8/0xc0 [ 128.563883] el0_sync+0x160/0x180 Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106143642.539698-8-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issueHao Lan
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs 1024-1279 are in different BAR space addresses. However, hclge_fetch_pf_reg does not distinguish the tqp space information when reading the tqp space information. When the number of TQPs is greater than 1024, access bar space overwriting occurs. The problem of different segments has been considered during the initialization of tqp.io_base. Therefore, tqp.io_base is directly used when the queue is read in hclge_fetch_pf_reg. The error message: Unable to handle kernel paging request at virtual address ffff800037200000 pc : hclge_fetch_pf_reg+0x138/0x250 [hclge] lr : hclge_get_regs+0x84/0x1d0 [hclge] Call trace: hclge_fetch_pf_reg+0x138/0x250 [hclge] hclge_get_regs+0x84/0x1d0 [hclge] hns3_get_regs+0x2c/0x50 [hns3] ethtool_get_regs+0xf4/0x270 dev_ethtool+0x674/0x8a0 dev_ioctl+0x270/0x36c sock_do_ioctl+0x110/0x2a0 sock_ioctl+0x2ac/0x530 __arm64_sys_ioctl+0xa8/0x100 invoke_syscall+0x4c/0x124 el0_svc_common.constprop.0+0x140/0x15c do_el0_svc+0x30/0xd0 el0_svc+0x1c/0x2c el0_sync_handler+0xb0/0xb4 el0_sync+0x168/0x180 Fixes: 939ccd107ffc ("net: hns3: move dump regs function to a separate file") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250106143642.539698-7-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: initialize reset_timer before hclgevf_misc_irq_init()Jian Shen
Currently the misc irq is initialized before reset_timer setup. But it will access the reset_timer in the irq handler. So initialize the reset_timer earlier. Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250106143642.539698-6-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: don't auto enable misc vectorJian Shen
Currently, there is a time window between misc irq enabled and service task inited. If an interrupte is reported at this time, it will cause warning like below: [ 16.324639] Call trace: [ 16.324641] __queue_delayed_work+0xb8/0xe0 [ 16.324643] mod_delayed_work_on+0x78/0xd0 [ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge] [ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge] [ 16.324666] __handle_irq_event_percpu+0x64/0x1e0 [ 16.324667] handle_irq_event+0x80/0x170 [ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc [ 16.324671] __handle_domain_irq+0x84/0xfc [ 16.324673] gic_handle_irq+0x88/0x2c0 [ 16.324674] el1_irq+0xb8/0x140 [ 16.324677] arch_cpu_idle+0x18/0x40 [ 16.324679] default_idle_call+0x5c/0x1bc [ 16.324682] cpuidle_idle_call+0x18c/0x1c4 [ 16.324684] do_idle+0x174/0x17c [ 16.324685] cpu_startup_entry+0x30/0x6c [ 16.324687] secondary_start_kernel+0x1a4/0x280 [ 16.324688] ---[ end trace 6aa0bff672a964aa ]--- So don't auto enable misc vector when request irq.. Fixes: 7be1b9f3e99f ("net: hns3: make hclge_service use delayed workqueue") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250106143642.539698-5-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: Resolved the issue that the debugfs query result is inconsistent.Hao Lan
This patch modifies the implementation of debugfs: When the user process stops unexpectedly, not all data of the file system is read. In this case, the save_buf pointer is not released. When the user process is called next time, save_buf is used to copy the cached data to the user space. As a result, the queried data is stale. To solve this problem, this patch implements .open() and .release() handler for debugfs file_operations. moving allocation buffer and execution of the cmd to the .open() handler and freeing in to the .release() handler. Allocate separate buffer for each reader and associate the buffer with the file pointer. When different user read processes no longer share the buffer, the stale data problem is fixed. Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Guangwei Zhang <zhangwangwei6@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106143642.539698-4-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>