summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-11-15virtio-net: rq submits premapped per-bufferXuan Zhuo
virtio-net rq submits premapped per-buffer by setting sg page to NULL; Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241112012928.102478-7-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15virtio_ring: introduce add api for premappedXuan Zhuo
Two APIs are introduced to submit premapped per-buffers. int virtqueue_add_inbuf_premapped(struct virtqueue *vq, struct scatterlist *sg, unsigned int num, void *data, void *ctx, gfp_t gfp); int virtqueue_add_outbuf_premapped(struct virtqueue *vq, struct scatterlist *sg, unsigned int num, void *data, gfp_t gfp); Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241112012928.102478-6-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15virtio_ring: perform premapped operations based on per-bufferXuan Zhuo
The current configuration sets the virtqueue (vq) to premapped mode, implying that all buffers submitted to this queue must be mapped ahead of time. This presents a challenge for the virtnet send queue (sq): the virtnet driver would be required to keep track of dma information for vq size * 17, which can be substantial. However, if the premapped mode were applied on a per-buffer basis, the complexity would be greatly reduced. With AF_XDP enabled, AF_XDP buffers would become premapped, while kernel skb buffers could remain unmapped. And consider that some sgs are not generated by the virtio driver, that may be passed from the block stack. So we can not change the sgs, new APIs are the better way. So we pass the new argument 'premapped' to indicate the buffers submitted to virtio are premapped in advance. Additionally, DMA unmap operations for these buffers will be bypassed. Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241112012928.102478-5-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15virtio_ring: packed: record extras for indirect buffersXuan Zhuo
The subsequent commit needs to know whether every indirect buffer is premapped or not. So we need to introduce an extra struct for every indirect buffer to record this info. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241112012928.102478-4-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15virtio_ring: split: record extras for indirect buffersXuan Zhuo
The subsequent commit needs to know whether every indirect buffer is premapped or not. So we need to introduce an extra struct for every indirect buffer to record this info. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241112012928.102478-3-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15virtio_ring: introduce vring_need_unmap_bufferXuan Zhuo
To make the code readable, introduce vring_need_unmap_buffer() to replace do_unmap. use_dma_api premapped -> vring_need_unmap_buffer() 1. false false false 2. true false true 3. true true false Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241112012928.102478-2-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-11-05 (ice, ixgbe, igc. igb, igbvf, e1000) For ice: Mateusz refactors and adds additional SerDes configuration values to be output. Przemek refactors processing of DDP and adds support for a flag field in the DDP's signature segment header. Joe Damato adds support for persistent NAPI config. Brett adjusts setting of Tx promiscuous based on unicast/multicast setting. Jake moves setting of pf->supported_rxdids to occur directly after DDP load and changes a small struct to use stack memory. Frederic Weisbecker adds WQ_UNBOUND flag to the workqueue. For ixgbe: Diomidis Spinellis removes a circular dependency. For igc: Vitaly removes an unneeded autoneg parameter. For igb: Johnny Park fixes a couple of typos. For igbvf: Wander Lairson Costa removes an unused spinlock. For e1000: Joe Damato adds RTNL lock to some calls where it is expected to be held. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: e1000: Hold RTNL when e1000_down can be called igbvf: remove unused spinlock igb: Fix 2 typos in comments in igb_main.c igc: remove autoneg parameter from igc_mac_info ixgbe: Break include dependency cycle ice: Unbind the workqueue ice: use stack variable for virtchnl_supported_rxdids ice: initialize pf->supported_rxdids immediately after loading DDP ice: only allow Tx promiscuous for multicast ice: Add support for persistent NAPI config ice: support optional flags in signature segment header ice: refactor "last" segment of DDP pkg ice: extend dump serdes equalizer values feature ice: rework of dump serdes equalizer values feature ==================== Link: https://patch.msgid.link/20241113185431.1289708-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15ndo_fdb_del: Add a parameter to report whether notification was sentPetr Machata
In a similar fashion to ndo_fdb_add, which was covered in the previous patch, add the bool *notified argument to ndo_fdb_del. Callees that send a notification on their own set the flag to true. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/06b1acf4953ef0a5ed153ef1f32d7292044f2be6.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15ndo_fdb_add: Add a parameter to report whether notification was sentPetr Machata
Currently when FDB entries are added to or deleted from a VXLAN netdevice, the VXLAN driver emits one notification, including the VXLAN-specific attributes. The core however always sends a notification as well, a generic one. Thus two notifications are unnecessarily sent for these operations. A similar situation comes up with bridge driver, which also emits notifications on its own: # ip link add name vx type vxlan id 1000 dstport 4789 # bridge monitor fdb & [1] 1981693 # bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1 de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent de:ad:be:ef:13:37 dev vx self permanent In order to prevent this duplicity, add a paremeter to ndo_fdb_add, bool *notified. The flag is primed to false, and if the callee sends a notification on its own, it sets it to true, thus informing the core that it should not generate another notification. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/cbf6ae8195e85cbf922f8058ce4eba770f3b71ed.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15rtase: Modify the content format of the enum rtase_registersJustin Lai
Remove unnecessary spaces. Signed-off-by: Justin Lai <justinlai0215@realtek.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241114112549.376101-3-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15rtase: Modify the name of the goto labelJustin Lai
Modify the name of the goto label in rtase_init_one(). Signed-off-by: Justin Lai <justinlai0215@realtek.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241114112549.376101-2-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15octeontx2-pf: Fix spelling mistake "reprentator" -> "representor"Colin Ian King
There is a spelling mistake in a NL_SET_ERR_MSG_MOD error message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://patch.msgid.link/20241114102012.1868514-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15enic: Move kdump check into enic_adjust_resources()Nelson Escobar
Move the kdump check into enic_adjust_resources() so that everything that modifies resources is in the same function. Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20241113-remove_vic_resource_limits-v4-7-a34cf8570c67@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15enic: Move enic resource adjustments to separate functionNelson Escobar
Move the enic resource adjustments out of enic_set_intr_mode() and into its own function, enic_adjust_resources(). Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20241113-remove_vic_resource_limits-v4-6-a34cf8570c67@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15enic: Adjust used MSI-X wq/rq/cq/interrupt resources in a more robust wayNelson Escobar
Instead of failing to use MSI-X if resources aren't configured exactly right, use the resources we do have. Since we could start using large numbers of rq resources, we do limit the rq count to what netif_get_num_default_rss_queues() recommends. Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20241113-remove_vic_resource_limits-v4-5-a34cf8570c67@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15enic: Allocate arrays in enic struct based on VIC configNelson Escobar
Allocate wq, rq, cq, intr, and napi arrays based on the number of resources configured in the VIC. Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20241113-remove_vic_resource_limits-v4-4-a34cf8570c67@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15enic: Save resource counts we read from HWNelson Escobar
Save the resources counts for wq,rq,cq, and interrupts in *_avail variables so that we don't lose the information when adjusting the counts we are actually using. Report the wq_avail and rq_avail as the channel maximums in 'ethtool -l' output. Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20241113-remove_vic_resource_limits-v4-3-a34cf8570c67@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15enic: Make MSI-X I/O interrupts come after the other required onesNelson Escobar
The VIC hardware has a constraint that the MSIX interrupt used for errors be specified as a 7 bit number. Before this patch, it was allocated after the I/O interrupts, which would cause a problem if 128 or more I/O interrupts are in use. So make the required interrupts come before the I/O interrupts to guarantee the error interrupt offset never exceeds 7 bits. Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20241113-remove_vic_resource_limits-v4-2-a34cf8570c67@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15enic: Create enic_wq/rq structures to bundle per wq/rq dataNelson Escobar
Bundling the wq/rq specific data into dedicated enic_wq/rq structures cleans up the enic structure and simplifies future changes related to wq/rq. Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Co-developed-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20241113-remove_vic_resource_limits-v4-1-a34cf8570c67@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15net: phy: microchip_t1: Clause-45 PHY loopback support for LAN887xTarun Alle
Adds support for clause-45 PHY loopback for the Microchip LAN887x driver. Signed-off-by: Tarun Alle <Tarun.Alle@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241114101951.382996-1-Tarun.Alle@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15bnxt_en: optimize gettimex64Vadim Fedorenko
Current implementation of gettimex64() makes at least 3 PCIe reads to get current PHC time. It takes at least 2.2us to get this value back to userspace. At the same time there is cached value of upper bits of PHC available for packet timestamps already. This patch reuses cached value to speed up reading of PHC time. Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241114114820.1411660-1-vadfed@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15Merge tag 'for-net-next-2024-11-14' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - btusb: add Foxconn 0xe0fc for Qualcomm WCN785x - btmtk: Fix ISO interface handling - Add quirk for ATS2851 - btusb: Add RTL8852BE device 0489:e123 - ISO: Do not emit LE PA/BIG Create Sync if previous is pending - btusb: Add USB HW IDs for MT7920/MT7925 - btintel_pcie: Add handshake between driver and firmware - btintel_pcie: Add recovery mechanism - hci_conn: Use disable_delayed_work_sync - SCO: Use kref to track lifetime of sco_conn - ISO: Use kref to track lifetime of iso_conn - btnxpuart: Add GPIO support to power save feature - btusb: Add 0x0489:0xe0f3 and 0x13d3:0x3623 for Qualcomm WCN785x * tag 'for-net-next-2024-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (51 commits) Bluetooth: MGMT: Add initial implementation of MGMT_OP_HCI_CMD_SYNC Bluetooth: fix use-after-free in device_for_each_child() Bluetooth: btintel: Direct exception event to bluetooth stack Bluetooth: hci_core: Fix calling mgmt_device_connected Bluetooth: hci_bcm: Use the devm_clk_get_optional() helper Bluetooth: ISO: Send BIG Create Sync via hci_sync Bluetooth: hci_conn: Remove alloc from critical section Bluetooth: ISO: Use kref to track lifetime of iso_conn Bluetooth: SCO: Use kref to track lifetime of sco_conn Bluetooth: HCI: Add IPC(11) bus type Bluetooth: btusb: Add 3 HWIDs for MT7925 Bluetooth: btusb: Add new VID/PID 0489/e124 for MT7925 Bluetooth: ISO: Update hci_conn_hash_lookup_big for Broadcast slave Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending Bluetooth: ISO: Fix matching parent socket for BIS slave Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending Bluetooth: btrtl: Decrease HCI_OP_RESET timeout from 10 s to 2 s Bluetooth: btbcm: fix missing of_node_put() in btbcm_get_board_name() Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925 Bluetooth: btmtk: adjust the position to init iso data anchor ... ==================== Link: https://patch.msgid.link/20241114214731.1994446-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14net: ethtool: only allow set_rxnfc with rss + ring_cookie if driver opts inEdward Cree
Ethtool ntuple filters with FLOW_RSS were originally defined as adding the base queue ID (ring_cookie) to the value from the indirection table, so that the same table could distribute over more than one set of queues when used by different filters. However, some drivers / hardware ignore the ring_cookie, and simply use the indirection table entries as queue IDs directly. Thus, for drivers which have not opted in by setting ethtool_ops.cap_rss_rxnfc_adds to declare that they support the original (addition) semantics, reject in ethtool_set_rxnfc any filter which combines FLOW_RSS and a nonzero ring. (For a ring_cookie of zero, both behaviours are equivalent.) Set the cap bit in sfc, as it is known to support this feature. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://patch.msgid.link/cc3da0844083b0e301a33092a6299e4042b65221.1731499022.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14net: sparx5: add missing lan969x Kconfig dependencyArnd Bergmann
The sparx5 switchdev driver can be built either with or without support for the Lan969x switch. However, it cannot be built-in when the lan969x driver is a loadable module because of a link-time dependency: arm-linux-gnueabi-ld: drivers/net/ethernet/microchip/sparx5/sparx5_main.o:(.rodata+0xd44): undefined reference to `lan969x_desc' Add a Kconfig dependency to reflect this in Kconfig, allowing all the valid configurations but forcing sparx5 to be a loadable module as well if lan969x is. Fixes: 98a01119608d ("net: sparx5: add compatible string for lan969x") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Link: https://patch.msgid.link/20241113115513.4132548-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14net: enetc: clean up before returning in probe()Dan Carpenter
We recently added this error path. We need to call enetc_pci_remove() before returning. It cleans up the resources from enetc_pci_probe(). Fixes: 99100d0d9922 ("net: enetc: add preliminary support for i.MX95 ENETC PF") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/93888efa-c838-4682-a7e5-e6bf318e844e@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14mdio: Remove mdio45_ethtool_gset_npage()Alistair Francis
The mdio45_ethtool_gset_npage() function isn't called, so let's remove it. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Link: https://patch.msgid.link/20241112105430.438491-2-alistair@alistair23.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14r8169: copy vendor driver 2.5G/5G EEE advertisement constraintsHeiner Kallweit
Vendor driver r8125 doesn't advertise 2.5G EEE on RTL8125A, and r8126 doesn't advertise 5G EEE. Likely there are compatibility issues, therefore do the same in r8169. With this change we don't have to disable 2.5G EEE advertisement in rtl8125a_config_eee_phy() any longer. We use new phylib accessor phy_set_eee_broken() to mark the respective EEE modes as broken. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/ce185e10-8a2f-4cf8-a49b-fd8fb3c3c8a1@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14net: phy: convert eee_broken_modes to a linkmode bitmapHeiner Kallweit
eee_broken_modes has a eee_cap1 register layout currently. This doen't allow to flag e.g. 2.5Gbps or 5Gbps BaseT EEE as broken. To overcome this limitation switch eee_broken_modes to a linkmode bitmap. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/dfe0c9ff-84b0-4328-86d7-e917ebc084a1@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-14Bluetooth: btintel: Direct exception event to bluetooth stackKiran K
Have exception event part of HCI traces which helps for debug. snoop traces: > HCI Event: Vendor (0xff) plen 79 Vendor Prefix (0x8780) Intel Extended Telemetry (0x03) Unknown extended telemetry event type (0xde) 01 01 de Unknown extended subevent 0x07 01 01 de 07 01 de 06 1c ef be ad de ef be ad de ef be ad de ef be ad de ef be ad de ef be ad de ef be ad de 05 14 ef be ad de ef be ad de ef be ad de ef be ad de ef be ad de 43 10 ef be ad de ef be ad de ef be ad de ef be ad de Fixes: af395330abed ("Bluetooth: btintel: Add Intel devcoredump support") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: hci_bcm: Use the devm_clk_get_optional() helperAndy Shevchenko
Use devm_clk_get_optional() instead of hand writing it. This saves some LoC and improves the semantic. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btusb: Add 3 HWIDs for MT7925Jiande Lu
Add below HWIDs for MediaTek MT7925 USB Bluetooth chip. VID 0x0489, PID 0xe14f VID 0x0489, PID 0xe150 VID 0x0489, PID 0xe151 Patch has been tested successfully and controller is recognized device pair successfully. MT7925 module bring up message as below. Bluetooth: Core ver 2.22 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20240816133202 Bluetooth: hci0: Device setup in 286558 usecs Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. Bluetooth: hci0: AOSP extensions version v1.00 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: MGMT ver 1.22 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Signed-off-by: Jiande Lu <jiande.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btusb: Add new VID/PID 0489/e124 for MT7925Jonathan McCrohan
Add VID 0489 & PID e124 for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e124 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btrtl: Decrease HCI_OP_RESET timeout from 10 s to 2 sHilda Wu
The original timeout setting for HCI Reset on shutdown is 10 seconds. HCI Reset shouldn't take 10 seconds to complete so instead use the default timeout for commands. Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btbcm: fix missing of_node_put() in btbcm_get_board_name()Javier Carrasco
of_find_node_by_path() returns a pointer to a device_node with its refcount incremented, and a call to of_node_put() is required to decrement the refcount again and avoid leaking the resource. If 'of_property_read_string_index(root, "compatible", 0, &tmp)' fails, the function returns without calling of_node_put(root) before doing so. The automatic cleanup attribute can be used by means of the __free() macro to automatically call of_node_put() when the variable goes out of scope, fixing the issue and also accounting for new error paths. Fixes: 63fac3343b99 ("Bluetooth: btbcm: Support per-board firmware variants") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925Hao Qin
Add VID 0489 & PID e111 for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e111 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Hao Qin <hao.qin@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btmtk: adjust the position to init iso data anchorChris Lu
MediaTek iso data anchor init should be moved to where MediaTek claims iso data interface. If there is an unexpected BT usb disconnect during setup flow, it will cause a NULL pointer crash issue when releasing iso anchor since the anchor wasn't been init yet. Adjust the position to do iso data anchor init. [ 17.137991] pc : usb_kill_anchored_urbs+0x60/0x168 [ 17.137998] lr : usb_kill_anchored_urbs+0x44/0x168 [ 17.137999] sp : ffffffc0890cb5f0 [ 17.138000] x29: ffffffc0890cb5f0 x28: ffffff80bb6c2e80 [ 17.144081] gpio gpiochip0: registered chardev handle for 1 lines [ 17.148421] x27: 0000000000000000 [ 17.148422] x26: ffffffd301ff4298 x25: 0000000000000003 x24: 00000000000000f0 [ 17.148424] x23: 0000000000000000 x22: 00000000ffffffff x21: 0000000000000001 [ 17.148425] x20: ffffffffffffffd8 x19: ffffff80c0f25560 x18: 0000000000000000 [ 17.148427] x17: ffffffd33864e408 x16: ffffffd33808f7c8 x15: 0000000000200000 [ 17.232789] x14: e0cd73cf80ffffff x13: 50f2137c0a0338c9 x12: 0000000000000001 [ 17.239912] x11: 0000000080150011 x10: 0000000000000002 x9 : 0000000000000001 [ 17.247035] x8 : 0000000000000000 x7 : 0000000000008080 x6 : 8080000000000000 [ 17.254158] x5 : ffffffd33808ebc0 x4 : fffffffe033dcf20 x3 : 0000000080150011 [ 17.261281] x2 : ffffff8087a91400 x1 : 0000000000000000 x0 : ffffff80c0f25588 [ 17.268404] Call trace: [ 17.270841] usb_kill_anchored_urbs+0x60/0x168 [ 17.275274] btusb_mtk_release_iso_intf+0x2c/0xd8 [btusb (HASH:5afe 6)] [ 17.284226] btusb_mtk_disconnect+0x14/0x28 [btusb (HASH:5afe 6)] [ 17.292652] btusb_disconnect+0x70/0x140 [btusb (HASH:5afe 6)] [ 17.300818] usb_unbind_interface+0xc4/0x240 [ 17.305079] device_release_driver_internal+0x18c/0x258 [ 17.310296] device_release_driver+0x1c/0x30 [ 17.314557] bus_remove_device+0x140/0x160 [ 17.318643] device_del+0x1c0/0x330 [ 17.322121] usb_disable_device+0x80/0x180 [ 17.326207] usb_disconnect+0xec/0x300 [ 17.329948] hub_quiesce+0x80/0xd0 [ 17.333339] hub_disconnect+0x44/0x190 [ 17.337078] usb_unbind_interface+0xc4/0x240 [ 17.341337] device_release_driver_internal+0x18c/0x258 [ 17.346551] device_release_driver+0x1c/0x30 [ 17.350810] usb_driver_release_interface+0x70/0x88 [ 17.355677] proc_ioctl+0x13c/0x228 [ 17.359157] proc_ioctl_default+0x50/0x80 [ 17.363155] usbdev_ioctl+0x830/0xd08 [ 17.366808] __arm64_sys_ioctl+0x94/0xd0 [ 17.370723] invoke_syscall+0x6c/0xf8 [ 17.374377] el0_svc_common+0x84/0xe0 [ 17.378030] do_el0_svc+0x20/0x30 [ 17.381334] el0_svc+0x34/0x60 [ 17.384382] el0t_64_sync_handler+0x88/0xf0 [ 17.388554] el0t_64_sync+0x180/0x188 [ 17.392208] Code: f9400677 f100a2f4 54fffea0 d503201f (b8350288) [ 17.398289] ---[ end trace 0000000000000000 ]--- Fixes: ceac1cb0259d ("Bluetooth: btusb: mediatek: add ISO data transmission functions") Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btintel_pcie: Replace deprecated PCI functionsPhilipp Stanner
pcim_iomap_regions() and pcim_iomap_table() have been deprecated in commit e354bb84a4c1 ("PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()"). Replace these functions with pcim_iomap_region(). Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: Set quirks for ATS2851Danil Pylaev
This adds quirks for broken ats2851 features. Signed-off-by: Danil Pylaev <danstiv404@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btintel_pcie: remove redundant assignment to variable retColin Ian King
The variable ret is being assigned -ENOMEM however this is never read and it is being re-assigned a new value when the code jumps to label resubmit. The assignment is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btintel: Do no pass vendor events to stackKiran K
During firmware download, vendor specific events like boot up and secure send result are generated. These events can be safely processed at the driver level. Passing on these events to stack prints unnecessary log as below. Bluetooth: hci0: Malformed MSFT vendor event: 0x02 Fixes: 3368aa357f3b ("Bluetooth: msft: Handle MSFT Monitor Device Event") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btintel_pcie: Remove deadcodeEverest K.C.
The switch case statement has a default branch. Thus, the return statement at the end of the function can never be reached. Fix it by removing the return statement at the end of the function. This issue was reported by Coverity Scan. Signed-off-by: Everest K.C. <everestkc@everestkc.com.np> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: hci_qca: use devm_clk_get_optional_enabled_with_rate()Bartosz Golaszewski
Use the new devm_clk_get_optional_enabled_with_rate() clock helper to shrink the code a bit. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btintel: Add DSBR support for BlazarIW, BlazarU and GaPKiran K
Add DSBR support for BlazarIW, BlazarU and Gale Peak2 cores. Refer commit eb9e749c0182 ("Bluetooth: btintel: Allow configuring drive strength of BRI") for details about DSBR. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btmtksdio: Lookup device node only as fallbackChen-Yu Tsai
If the device tree is properly written, the SDIO function device node should be correctly defined, and the mmc core in Linux should correctly tie it to the device being probed. Only fall back to searching for the device node by compatible if the original device node tied to the device is incorrect, as seen in older device trees. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btintel_pcie: Add recovery mechanismKiran K
This patch adds a recovery mechanism to recover controller if firmware download fails due to unresponsive controller, command timeout, firmware signature verification failure etc. Driver attmepts maximum of 5 times before giving up. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btintel_pcie: Add handshake between driver and firmwareKiran K
The following handshake mechanism needs be followed after firmware download is completed to bring the firmware to running state. After firmware fragments of Operational image are downloaded and secure sends result of the image succeeds, 1. Driver sends HCI Intel reset with boot option #1 to switch FW image. 2. FW sends Alive GP[0] MSIx 3. Driver enables data path (doorbell 0x460 for RBDs, etc...) 4. Driver gets Bootup event from firmware 5. Driver performs D0 entry to device (WRITE to IPC_Sleep_Control =0x0) 6. FW sends Alive GP[0] MSIx 7. Device host interface is fully set for BT protocol stack operation. 8. Driver may optionally get debug event with ID 0x97 which can be dropped For Intermediate loadger image, all the above steps are applicable expcept #5 and #6. On HCI_OP_RESET, firmware raises alive interrupt. Driver needs to wait for it before passing control over to bluetooth stack. Co-developed-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btnxpuart: Add GPIO support to power save featureNeeraj Sanjay Kale
This adds support for driving the chip into sleep or wakeup with a GPIO. If the device tree property device-wakeup-gpios is defined, the driver utilizes this GPIO for controlling the chip's power save state, else it uses the default UART-break method. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btusb: Add USB HW IDs for MT7920/MT7925Jiande Lu
Add HW IDs for wireless module. These HW IDs are extracted from Windows driver inf file and the test for card bring up successful. MT7920 HW IDs test with below patch. https://patchwork.kernel.org/project/bluetooth/ patch/20240930081257.23975-1-chris.lu@mediatek.com/ Patch has been tested successfully and controller is recognized devices pair successfully. MT7920 module bring up message as below. Bluetooth: Core ver 2.22 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20240930111457 Bluetooth: hci0: Device setup in 143004 usecs Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. Bluetooth: hci0: AOSP extensions version v1.00 Bluetooth: hci0: AOSP quality report is supported Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: MGMT ver 1.22 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 MT7925 module bring up message as below. Bluetooth: Core ver 2.22 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20240816133202 Bluetooth: hci0: Device setup in 286558 usecs Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. Bluetooth: hci0: AOSP extensions version v1.00 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: MGMT ver 1.22 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Signed-off-by: Jiande Lu <jiande.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btusb: Add RTL8852BE device 0489:e123 to device tablesHilda Wu
Add the support ID 0489:e123 to usb_device_id table for Realtek RTL8852B chip. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e123 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14bluetooth: Fix typos in the commentsYan Zhen
Correctly spelled comments make it easier for the reader to understand the code. Fix typos: 'fragement' ==> 'fragment', 'genration' ==> 'generation', 'funciton' ==> 'function', 'Explitly' ==> 'Explicitly', 'explaination' ==> 'explanation', 'Tranlate' ==> 'Translate', 'immediatelly' ==> 'immediately', 'isntance' ==> 'instance', 'transmittion' ==> 'transmission', 'recevie' ==> 'receive', 'outselves' ==> 'ourselves', 'conrol' ==> 'control'. Signed-off-by: Yan Zhen <yanzhen@vivo.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>