| Age | Commit message (Collapse) | Author |
|---|
|
The PCIe driver registers its MSI-X handlers with
devm_request_threaded_irq(), but remove() uses free_irq() directly. The
devres actions then retain registrations and attempt to release them again
during device cleanup.
Use devm_free_irq() for the remove path and for already registered vectors
when a later setup request fails. This removes the managed resource at the
same time as the IRQ is released and keeps MSI-X vector teardown ordered
after IRQ ownership is gone.
Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Reset shared Bluetooth hardware after mapping the BAR and before setting
up MSI-X interrupts, so stale device state is cleared before IRQ handlers
and interrupt masks are configured.
Propagate reset errors so probe aborts rather than continuing when the
reset fails.
Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Sai Teja Aluvala <aluvala.sai.teja@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btintel_pcie_prepare_tx() uses tfd_index to access the TFD and data
buffer arrays before the index is advanced modulo txq->count. An index
equal to txq->count is one past the end of both arrays, so reject it in
the bounds check.
Fixes: 6e65a09f9275 ("Bluetooth: btintel_pcie: Add *setup* function to download firmware")
Signed-off-by: Ravindra <ravindra@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Parse DDC record lengths in unsigned storage so 0xFF does not wrap.
Reject records smaller than the mandatory three-byte header, records
exceeding U8_MAX, and records exceeding remaining firmware bytes before
issuing Intel_Write_DDC.
This issue was reported by Claude Mythos.
Fixes: 145f2368c5fd ("Bluetooth: btintel: Add Device Configuration support")
Signed-off-by: Sai Teja Aluvala <aluvala.sai.teja@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btintel_pcie_send_frame() eventually copies skb->data into a fixed
BTINTEL_PCIE_BUFFER_SIZE (4096) DMA buffer via memcpy() in
btintel_pcie_prepare_tx(), with a 4-byte PCIe type header prepended.
A user-space process with HCI_CHANNEL_USER access can inject an
oversized packet and overflow the buffer.
Reject packets larger than
BTINTEL_PCIE_BUFFER_SIZE - BTINTEL_PCIE_HCI_TYPE_LEN on entry.
Fixes: 6e65a09f9275 ("Bluetooth: btintel_pcie: Add *setup* function to download firmware")
Cc: stable@vger.kernel.org
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
plen is u16 and computed as HDR_SIZE + dlen. For ACL/ISO frames dlen
is a 16-bit field, so a value >= 0xFFFC wraps the sum, bypassing the
"skb->len < plen" check and letting skb_trim() truncate the packet.
Widen plen to u32 so the addition cannot wrap.
Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Cc: stable@vger.kernel.org
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The "Exception info %s" print uses skb->data + 1, but the 12-byte
payload is not guaranteed to be NUL-terminated and can be read past
its end.
Bound the print with "%.*s" and skb->len - 1.
Fixes: 973bb97e5aee ("Bluetooth: btintel: Add generic function for handling hardware errors")
Cc: stable@vger.kernel.org
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
In btintel_pcie_msix_rx_handle(), the driver processes RX completion
descriptors (urbd1) written by the PCIe device into DMA-coherent memory.
urbd1->frbd_tag (a 16-bit field fully controlled by the device firmware
via DMA) is used directly as an array index into rxq->bufs[] without any
bounds check. rxq->bufs[] has only BTINTEL_PCIE_RX_DESCS_COUNT (64)
entries, while frbd_tag can be any value 0-65535. A malicious or
malfunctioning device can write an out-of-range frbd_tag, causing the
driver to dereference an out-of-bounds data_buf pointer.
Additionally, cr_hia is read from a DMA-shared index array also writable
by the device; if the device sets cr_hia >= rxq->count, the while-loop
never terminates because cr_tia is wrapped via modulo rxq->count and can
never equal an out-of-range cr_hia.
Add bounds validation for cr_hia and frbd_tag in the RX path, and cr_hia
in the TX path. Log invalid values with bt_dev_err before returning.
Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Ravindra <ravindra@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When CONFIG_DEV_COREDUMP=n, hci_devcd_append() returns -EOPNOTSUPP
without freeing its skb argument. This leaks the cloned skb and also
prevents nxp_set_ind_reset() from being called to perform recovery.
Fix by guarding the hci_devcd_append(hdev, skb_clone(skb, GFP_ATOMIC))
call with IS_ENABLED(CONFIG_DEV_COREDUMP).
Fixes: 998e447f443f ("Bluetooth: btnxpuart: Add support for HCI coredump feature")
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btintel_pcie_submit_rx() used frbd_index > rxq->count to guard the
FRBD array access, allowing frbd_index == rxq->count to pass through
and index one element past the end of the array. Change the check to
>= rxq->count so every out-of-range index is rejected.
This issue was reported by Claude Mythos.
Fixes: c2b636b3f788 (Bluetooth: btintel_pcie: Add support for PCIe transport)
Signed-off-by: Sai Teja Aluvala <aluvala.sai.teja@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
In btmtksdio_shutdown(), pm_runtime_get_sync() is called at the
beginning of the function. However, if sending the WMT function
control command fails later, the driver returns early.
It bypasses the corresponding pm_runtime_put_noidle() and
pm_runtime_disable() calls, leaking the PM usage counter and leaving PM
runtime enabled indefinitely.
Fall through to execute the PM runtime cleanup block even if WMT errors.
Fixes: 7f3c563c575e ("Bluetooth: btmtksdio: Add runtime PM support to SDIO based Bluetooth")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btmtksdio.c and btmtkuart.c cast a received WMT event straight to
struct btmtk_hci_wmt_evt and read its op/flag fields without checking
the event is long enough to contain them, unlike btmtk.c. The
FUNC_CTRL case then further casts to struct btmtk_hci_wmt_evt_funcc
and reads its 2-byte status field, again without a length check.
Firmware that sends a short or malformed WMT event makes both drivers
read past the end of the received SKB.
Mirror btmtk.c: validate the base WMT header with skb_pull_data()
before touching any of its fields, and when a FUNC_CTRL event turns
out to be the short, header-only form (a plain enable/disable ack
with no status word), decode the result from the header's own flag
byte instead (0 = success, otherwise failure).
Verified setup on MT7920, MT7921, MT7922 and MT7925: no regression.
Fixes: 9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices")
Fixes: e0b67035a90b ("Bluetooth: mediatek: update the common setup between MT7622 and other devices")
Assisted-by: Claude:claude-opus-5
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
A too-short BTMTK_WMT_FUNC_CTRL event (WMT header only, no trailing
2-byte status word) is always treated as BTMTK_WMT_ON_UNDONE. This
short form is how firmware acks a plain enable/disable request, and
the actual result is carried in the header's own flag byte (0 =
success), not a separate status word. Decode it from there instead of
assuming failure.
Verified setup on MT7920, MT7921, MT7922 and MT7925: no regression.
Fixes: e3ac0d9f1a20 ("Bluetooth: btmtk: accept too short WMT FUNC_CTRL events")
Assisted-by: Claude:claude-opus-5
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_uart_close() closes the serdev port if HCI_QUIRK_NON_PERSISTENT_SETUP
is set (for example, for the WCN399x family). A failed hci_dev_open_sync()
following a successful qca_setup() calls hdev->close() but not
hdev->shutdown(), so the port is closed while power->vregs_on is left true.
qca_serdev_remove() then passes its power->vregs_on test and calls
qca_power_off(), which writes to the closed port unconditionally.
Seen on a WCN3988 by unbinding the driver after a controller failure. The
trace below is from a 7.0.0 based kernel, where qca_power_off() was still
named qca_power_shutdown():
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000038
Call trace:
tty_set_termios+0x50/0x238 (P)
ttyport_set_baudrate+0x84/0xc0
serdev_device_set_baudrate+0x24/0x40
qca_power_shutdown+0x158/0x1fc [hci_uart]
qca_serdev_remove+0x54/0x68 [hci_uart]
serdev_drv_remove+0x1c/0x2c
device_remove+0x4c/0x80
device_release_driver_internal+0x1cc/0x224
device_driver_detach+0x18/0x24
unbind_store+0xb4/0xc0
Check HCI_UART_PROTO_READY, which hci_uart_close() clears in the same place
it closes the port, before writing to it. The regulator disable is left
unconditional so the controller is still powered down.
The dangling serport->tty that turns this into a use-after-free is
addressed in a separate patch.
Fixes: fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990")
Signed-off-by: Ibrahim Abdelkader <iabdelka@qti.qualcomm.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btintel_pcie_prepare_tx() copies skb->len bytes into a fixed
BTINTEL_PCIE_BUFFER_SIZE (4096) DMA slot via an unchecked memcpy.
Oversized packets are currently rejected only in
btintel_pcie_send_frame(); any future caller of
btintel_pcie_send_sync() would silently overflow the DMA buffer.
Add the bounds check in btintel_pcie_send_sync() itself, right
before skb_push() and the DMA copy.
Assisted-by: Copilot:claude-sonnet-5 code-review code-generation
Fixes: 6e65a09f9275 ("Bluetooth: btintel_pcie: Add *setup* function to download firmware")
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The NXP IW610 module exposes itself as a composite USB device
(0471:0215) with three interfaces: two real Bluetooth HCI interfaces
(class 0xe0) and one vendor-specific WiFi interface (class 0xff) used
by mwifiex-nxp.
The composite device's whole USB descriptor reports class 0xe0/01/01
(Bluetooth), so btusb_table's generic USB_DEVICE_INFO(0xe0, 0x01, 0x01)
entry matches every interface, not just the two real HCI ones -- btusb
ends up binding the WiFi interface too, and mwifiex-nxp never gets it.
Fix:
1. In btusb_table (the table the USB core actually matches against),
explicitly ignore the WiFi interface via BTUSB_IGNORE, ahead of the
generic entry.
2. In quirks_table, scope the existing BTUSB_MARVELL entry to the BT
interface class instead of matching the whole device by VID/PID
(harmless either way since quirks_table isn't consulted for initial
binding, but keep it correct).
Not upstream anywhere: checked NXP's own i.MX kernel fork
(nxp-imx/linux-imx), no IW610 references in btusb.c on any branch --
their reference designs wire this chip differently (WiFi over SDIO
per their release notes), so they never hit this.
Signed-off-by: Nicolas Thibert <nithibert@gmail.com>
Cc: stable@vger.kernel.org
Assisted-by: LLM (Claude Sonnet 5, Anthropic)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btusb_reset calls usb_autopm_get_interface to resume the device
before queuing a reset of it, but never calls the matching
usb_autopm_put_interface.
usb_queue_reset_device ends up in usb_reset_device(), and since
btusb provides no pre_reset/post_reset callbacks the interface is
merely unbound and rebound: the interface device object survives
this cycle, and so does its PM usage count, which is not cleared
when the driver is unbound.
As a result every reset permanently leaks a PM usage reference,
preventing the interface from being runtime suspended again until
it is unbound.
Set BTUSB_RESET flag before usb_queue_reset_device so that
btusb_disconnect drops the reference. If the flag is already set,
drop one reference.
Fixes: c9209b269afd ("Bluetooth: btusb: Introduce generic USB reset")
Assisted-by: Claude:qwen3.8-max
Signed-off-by: Jiajia Liu <liujiajia@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
MT7925 on HP Pro Mini 260 sometimes timed out during reloading driver
and reset usb device. btusb_suspend is not called again after closing
bluetooth interface.
usbcore: registered new interface driver btusb
Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20260605184935
Bluetooth: hci0: Execution of wmt command timed out
Bluetooth: hci0: Failed to send wmt patch dwnld (-110)
Bluetooth: hci0: Failed to set up firmware (-110)
usb 3-10: reset high-speed USB device number 4 using xhci_hcd
Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20260605184935
Bluetooth: hci0: Device setup in 1856545 usecs
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: hci0: AOSP quality report is supported
Bluetooth: MGMT ver 1.23
btusb_mtk_reset calls usb_autopm_get_interface to resume the device
before driving the hardware reset, but never calls the matching
usb_autopm_put_interface. Every hardware reset therefore leaks a PM
usage reference of the interface, preventing the device from being
runtime suspended again until it is unbound.
Add the BTUSB_RESET flag. It is set before usb_queue_reset_device
and is cleared in btusb_disconnect, which drops the reference as well.
If the flag is already set when a new reset is requested, drop one
reference.
Also clear BTMTK_HW_RESET_ACTIVE if usb_autopm_get_interface fails,
otherwise no further reset could ever be attempted.
Fixes: 25b6d7593a3a ("Bluetooth: btmtk: introduce btmtk reset work")
Assisted-by: Claude:qwen3.8-max
Signed-off-by: Jiajia Liu <liujiajia@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The command and ACL RPMsg endpoints store struct btqcomsmd as their
callback private data. The receive callbacks dereference btq->hdev
without taking an hci_dev reference.
The current teardown order frees the hci_dev before destroying the RPMsg
endpoints in both the hci_register_dev() error path and the driver remove
path. If WCNSS delivers data in that window, the endpoint callback can
run with an already freed hci_dev and pass it to the Bluetooth core.
For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears
the callback under the channel recv_lock. The receive path holds the same
lock while invoking the callback, so destroying the endpoints first both
prevents new callbacks and serializes with any callback already running.
Destroy the command and ACL endpoints before hci_free_dev(). Keep
hci_unregister_dev() first during remove so the HCI core stops issuing
operations before the transport endpoints are shut down. In the full
registration-error cleanup path, return directly after freeing the hci_dev
to avoid falling through to the partial-construction labels and destroying
the endpoints twice.
Fixes: 5052de8deff5 ("soc: qcom: smd: Transition client drivers from smd to rpmsg")
Fixes: 9a39a927be01 ("Bluetooth: btqcomsmd: Fix a resource leak in error handling paths in the probe function")
Cc: stable@vger.kernel.org
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btmtk_fw_get_filename() constructs the firmware name at runtime, so for
the MT7920 variant (dev_id 0x7961 with fw_flavor set) it requests
"mediatek/BT_RAM_CODE_MT7961_1a_2_hdr.bin" without ever declaring it via
MODULE_FIRMWARE(). Tools that select firmware from module metadata (e.g.
"modinfo -F firmware") therefore omit this blob, so request_firmware()
fails and Bluetooth does not initialise on MT7920, even though the file
is present in linux-firmware.
Declare it with MODULE_FIRMWARE(), as the mt76 driver already does for
the corresponding MT7920 wifi firmware.
Fixes: 1cb63d80fff6 ("Bluetooth: btusb: Add support Mediatek MT7920")
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Valid indices into txq->urbd0s/tfds/bufs are 0..txq->count-1, so
tfd_index == txq->count is already out of range. Change the guard in
btintel_pcie_msix_tx_handle() from '> txq->count' to '>= txq->count'.
This issue was reported by Claude Mythos.
Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btintel_pcie_submit_rx_work() reads packet_len from rfh_hdr without
checking if it exceeds the RX buffer size. An oversized packet_len
can lead to an out-of-bounds read in skb_put_data().
Validate packet_len to ensure it is non-zero and does not exceed
BTINTEL_PCIE_BUFFER_SIZE - sizeof(*rfh_hdr), logging an error when
invalid.
This issue was reported by Claude Mythos. It can be simulated either by
using customized firmware configured to return an invalid packet_len or
by modifying rfh_hdr->packet_len in the driver before calling
btintel_pcie_submit_rx_work().
Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When key_id from chip is zero, rtlbt_parse_firmware_v2() intentionally
ignores all security headers. However, the implementation simply breaks
from a switch statement and leaks uninitialized return code `rc' (if the
first section is a security one) or the previous section's `rc'.
Fix it by really skipping a loop with `continue'. For consistency and
readability, also do the same for the default case.
Fixes: 9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btusb_close() and btusb_flush() cancel data->rx_work with the
asynchronous cancel_delayed_work(), so if btusb_rx_work() is already
running on another CPU it keeps running after the cancel returns.
btusb_disconnect() calls hci_unregister_dev(), which invokes
btusb_close(), and then frees the btusb_data. A still running
btusb_rx_work() then dereferences the freed data:
while ((skb = skb_dequeue(&data->acl_q)))
data->recv_acl(data->hdev, skb);
Use cancel_delayed_work_sync() instead. In btusb_close() the cancel also
has to happen after btusb_stop_traffic(), otherwise an URB completion
racing with the cancel can requeue the work right after it has been
waited for.
Fixes: 800fe5ec302e ("Bluetooth: btusb: Add support for queuing during polling interval")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
It is reported that a remote wakeup could cause MT7922/MT7925's btusb
interface completely unresponsive. Resetting the xHCI root hub doesn't
help at all, and recovering from such a state needs a power cycle.
All reports seen to be relevant to Ryzen-based laptops. These NICs are
usually used as OEM components thanks to some sort of reference designs.
Their popularity on other platforms is unclear. While there is still a
chance that the quirk may exist on other platforms, be cautious and only
apply the quirk to direct children of Ryzen platforms's root hubs for
the time being. In most cases the root hub is on the SoC or PCH, which
needs the quirk. Unfortunately, this can't distinguish root hubs on PCIe
add-in cards. Such roughness should be acceptable, as PCIe USB
controller add-in cards are less commonly used nowadays. On the other
hand, applying the quirk doesn't hurt any functionalities either, as the
device can still be used as a wakeup source if desired. Theoretically,
we could retrieve the root hub's PCI vendor ID with some hierarchy
magic, but that's too intrusive...
Meanwhile, though device_set_wakeup_capable(false) is the correct fix
for other NICs with fake remote wakeup capabilities, doing so for
MT7922/MT7925 effectively prevents it from being used as wakeup
sources as per userspace requests. Hence, return -EBUSY on runtime
suspend to prevent the interface from being autosuspended while it's
still opened, which has the same effect as
device_set_wakeup_capable(false), since disabling remote wakeup simply
causes the USB core to gate runtime autosuspend as well due to
needs_remote_wakeup == 1. The interface can be safely autosuspended as
long as remote wakeup is disabled, i.e., after closing the HCI device.
Specifically, the interface may still take the advantage of remote
wakeup in order to wake up the system from sleep if userspace has
enabled it as a wakeup source.
Fixes: e31d761628ad ("Bluetooth: btmtk: Disable remote wakeup for MT7922/MT7925")
Tested-by: Rafael Passos <rafael@rcpassos.me>
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
wait_on_bit_timeout() returns 0 if the bit was cleared, -EINTR if the
process received a signal and the mode permitted wake up on that signal,
or -EAGAIN if the timeout elapsed. It never returns 1.
Hence the check "err == 1" in mrvl_load_firmware() is dead code: when
the waiting task is interrupted by a signal (-EINTR), the code falls
into the "else if (err)" branch and misreports it as "Firmware request
timeout" with -ETIMEDOUT instead of propagating -EINTR.
Fix this by testing for -EINTR so that an interrupted firmware load is
properly detected and reported.
Fixes: 162f812f23ba ("Bluetooth: hci_uart: Add Marvell support")
Signed-off-by: Gongwei Li <ligongwei@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btintel_read_version_tlv() ignores the parser return value, so setup
continues with partially initialized version data after a malformed TLV
causes parsing to stop.
Return the parser error to the caller so an invalid response fails setup
instead of being treated as successful. Keep this behavioral change
separate from the bounds checks so it can be reverted independently if
an existing controller sends malformed data.
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Reviewed-by: Ali Ahmet Memis <ali@iusegentoo.com>
Tested-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The firmware ID is treated as a NUL-terminated string even though the
TLV length is its only boundary. If the value does not contain a NUL
terminator, snprintf() can read beyond the received response.
Limit the conversion to the advertised TLV value length.
Fixes: 164c62f958f8 ("Bluetooth: btintel: Add firmware ID to firmware name")
Reviewed-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Tested-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btintel_parse_version_tlv() verifies that a complete TLV is present in
the response, but it does not ensure that the value is long enough for
the specific TLV type. A short value can therefore cause an
out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(),
or memcpy().
Reject values shorter than the minimum required by each known TLV type.
Also reject responses that do not contain the Command Complete Status
field.
Fixes: 57375beef71a ("Bluetooth: btintel: Add infrastructure to read controller information")
Reviewed-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Tested-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
On spurious interrupt where the TX and RX causes are not set, driver was
not clearing the auto mask which can block all the interrupts. Driver
needs to clear the automask even if no causes are set.
Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, IPSec and Netfilter.
Current release - fix to a fix:
- netfilter: ipset: remove need to allocate memory on delete operations
Current release - regressions:
- macb: drop CONFIG_OF #if block, fix build
Previous releases - always broken:
- stream of fixes for SCTP continues
- inet: frags: strip GSO state from fragments before reassembly
- virtio-net: ensure that TCP packets don't overflow gso_segs
- tcp-ao: fix use-after-free of current_key on reconnect to another
peer
- page_pool: remove zone/policy GFP flags when allocating XArray
entries
- Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN
- tls: device: fix out-of-bounds write in tls_append_frag()
- eth: bnxt:
- ring the doorbell when SW USO exits early, avoid packets stuck
in Tx
- gate TPH enablement behind BNXT_SUPPORTS_QUEUE_API check, avoid
users of older NICs seeing non-actionable warning messages
- eth: qede: fix NULL pointer dereference in TPA fragment processing"
* tag 'net-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (216 commits)
inet: frags: strip GSO state from fragments before reassembly
net/sched: sch_htb: limit htb_classify inner-class filter hops
selftests/net: packetdrill: add tcp_urg_ptr_retransmit
tcp: fix corruption of urgent data on multi-segment retransmit
usb: atm: usbatm: fix invalid ci_range initialization
net: fec: only stop PTP if it was initialized
slip: remove slip_hangup() to fix use-after-free in slip_receive_buf()
net: bridge: mcast: fix use-after-free of a master VLAN's multicast context
net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup
net: dsa: mxl862xx: enable assisted learning on CPU port
net: stmmac: restore NET_IP_ALIGN in the RX DMA offset
net: stmmac: drop gso_enabled_types and rely on netdev features
net: stmmac: selftests: Don't test flow control for small rx fifos
net: stmmac: selftests: Account for the UC filter list for filtering tests
net: stmmac: dwxgmac: Account for the primary MAC address for UC filtering
net: stmmac: dwmac4: Account for the primary MAC address for UC filtering
net: stmmac: dwmac1000: Account for the primary MAC address for UC filtering
net: stmmac: selftests: Check multiple MMC counters
selftests: net: Fix slow configurations in big_tcp_tunnels.sh
selftests: net: Lower threshold with csum offload off in big_tcp_tunnels.sh
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull another power sequencing update from Bartosz Golaszewski:
"A single tree-wide rename of two of the public functions to better
reflect their actual semantics:
- rename pwrseq_power_on/off() to pwrseq_enable/disable() tree-wide"
* tag 'pwrseq-updates-for-v7.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: rename pwrseq_power_on/off() to pwrseq_enable/disable()
|
|
The way power sequencing works means that a call to pwrseq_power_on()
does not necessarily result in the pwrseq target being powered-on at
that time: it may have already been powered on before. Similarly: a call
to pwrseq_power_off() does not have to result in an actual powering off
of resources: there may still be other users that requested a power-on
before.
We will also introduce the concept of "non-controllable" pwrseq targets
soon which further increases the disconnect between the naming
convention and the actual semantics.
What consumers of pwrseq descriptors actually do is: they *vote* for a
powering on of a given target or retract that vote. These operations
could be called get/put in line with runtime PM but this could become
confusing since we already provide pwrseq_get/put() for a different
purpose. pwrseq_vote_on/off() also have been rejected as unusual in
the tree.
Change the name of the two functions to pwrseq_enable/disable() which
better reflects their purpose and semantics and also mirrors other
enable-counted resources like regulators and clocks. No functional change
intended.
If at any point users need to know *when* the exact power event happens,
we can provide that information in the form of a notifier.
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Acked-by: Alessio Belle <alessio.belle@imgtec.com> # imagination
Link: https://patch.msgid.link/20260731-pwrseq-vote-rename-v3-1-44e60b8be053@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Commit 5ead2063611a ("Bluetooth: btrtl: fix RTL8761B/BU broken LE
extended scan") set HCI_QUIRK_BROKEN_EXT_SCAN for every CHIP_ID_8761B
device to cure repeated 0x2042 failures on an 0bda:a728 dongle. The
brokenness is per-dongle, not per-chip: on a TP-Link UB500 (2357:0604,
RTL8761BU, fw 0xdfc6d922) extended scan works, and the legacy scan
path the quirk forces is what is broken -- LE Set Scan Enable (0x200c)
times out with -110 about 30 s after firmware load, btusb resets the
device, and the adapter re-enumerates in an endless loop (382 firmware
reloads in one boot). 7.1.8, which predates the stable backport, runs
clean on this unit; 7.1.9 loops.
Move the quirk from btrtl's chip-wide switch to a btusb device-table
flag on the USB id the original fix was verified against. Other 8761B
dongles return to their earlier long-standing behaviour.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2521504
Fixes: 5ead2063611a ("Bluetooth: btrtl: fix RTL8761B/BU broken LE extended scan")
Cc: stable@vger.kernel.org
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When reading the local version information for vendor detection
fails, the error is only printed and 0 is returned, which masks the
setup failure from the HCI core.
Return PTR_ERR(skb) instead.
Fixes: fb2ce8d11f039 ("Bluetooth: hci_uart: Add support for vendor detection flag")
Fixes: 82f5169bf3d3b ("Bluetooth: hci_uart: add serdev driver support library")
Cc: stable@vger.kernel.org
Signed-off-by: Gongwei Li <ligongwei@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Commit ed2a2ef16a6b ("Bluetooth: Add quirk to ignore reserved PHY bits in
LE Extended Adv Report") added a quirk to handle creative use of the
reserved bits in the PHY fields for 4388 controllers in Apple silicon.
I observed the same issue with the BCM4378 Bluetooth controller (14e4:5f69,
rev 05) on an Apple MacBook Pro (13-inch, M2, 2022):
> HCI Event: LE Meta Event (0x3e) plen 51
LE Extended Advertising Report (0x0d)
Num reports: 1
Entry 0
Event type: 0x2513
Props: 0x0013
Connectable
Scannable
Use legacy advertising PDUs
Data status: Complete
Reserved (0x2500)
Legacy PDU Type: Reserved (0x2513)
Address type: Random (0x01)
Address: EA:C1:82:F0:24:C6 (Static)
Primary PHY: Reserved
Secondary PHY: No packets
SID: no ADI field (0xff)
TX power: 127 dBm
RSSI: -57 dBm (0xc7)
Periodic advertising interval: 0.00 msec (0x0000)
Direct address type: Public (0x00)
Direct address: 00:00:00:00:00:00 (OUI 00-00-00)
Data length: 25
This results in the firmware rejecting connection attempts with
"Unsupported Feature or Parameter Value" (0x11).
Fix the issue by using the same quirk for BCM4378 devices too.
I tested this locally and confirmed that the issue is resolved.
This was observed when attempting to connect a Kinesis Advantage 360
keyboard to the MacBook.
Assisted-by: Claude:claude-fable-5
Fixes: 2e7ed5f5e69b ("Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync")
Cc: stable@vger.kernel.org
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
nxp_process_fw_dump() pulls the ACL header off the frame and then reads
seq_num and buf_len from a struct nxp_fw_dump_hdr placed at skb->data,
without checking that the ACL payload is long enough to contain it.
h4_recv_buf() collects HCI_ACL_HDR_SIZE bytes of header followed by the
number of payload bytes named in that header, so skb->len is 4 + dlen
with dlen supplied by the controller and possibly smaller than the 8
byte dump header, or zero. A short frame with connection handle 0xfff
therefore reads both fields from beyond the received data.
Beyond the read itself, buf_len is what terminates a dump: a value of
zero makes the driver call hci_devcd_complete() and reset the
controller, so a truncated frame can end a dump early.
Use skb_pull_data() to validate and pull the FW dump header before
accessing its fields. Warn and reject the chunk if the header is
truncated.
Fixes: 998e447f443f ("Bluetooth: btnxpuart: Add support for HCI coredump feature")
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The current code uses of_graph_is_present() to decide whether to enter
the pwrseq path. However, of_graph_is_present() only checks for the
structural presence of a port/ports sub-node and does not check the
status property. This causes problems when a DT overlay disables the
remote M.2 connector node (e.g., switching from PCIe WiFi to SDIO WiFi):
the port node still exists, so of_graph_is_present() returns true, but
the pwrseq provider never registers because the connector is disabled,
leading to an infinite -EPROBE_DEFER loop.
Replace of_graph_is_present() with a new helper that traverses the OF
graph to the remote port parent (the M.2 connector node) and checks
of_device_is_available(). When the remote connector is disabled, the
pwrseq path is skipped, allowing the BT driver to fall through to the
direct bluetooth child node path.
Fixes: e48e332d84d8 ("Bluetooth: btnxpuart: Add M.2 Bluetooth device support using pwrseq")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btmtksdio_tx_packet() rounds the transfer size up to the SDIO block size
of 256 bytes, but hands the host controller the SKB buffer as is:
err = sdio_writesb(bdev->func, MTK_REG_CTDR, skb->data,
round_up(skb->len, MTK_SDIO_BLOCK_SIZE));
Only skb->len bytes hold packet data, so the controller reads up to 255
bytes of uninitialised memory and sends it to the device over the SDIO
bus. Depending on how much tailroom slack the SKB allocation happens to
carry, that read can also extend past the end of the buffer.
Compute the padded length up front, ensure the SKB has tailroom for it,
and zero-fill the padding with skb_put_zero(). skb->len then covers the
padding, so sdio_writesb() no longer needs to round up. byte_tx keeps
counting the header and the payload only, and the error path restores the
SKB so that the caller can requeue it.
Writing behind skb->tail is only safe because the driver owns the buffer,
which "Bluetooth: btmtksdio: Take exclusive ownership of the SKB before
TX" ensures.
Fixes: 9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Assisted-by: Claude:claude-opus-5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btmtksdio_tx_packet() prepends the MediaTek SDIO header with skb_push()
and writes into that space after only checking the headroom size. On a
cloned SKB that headroom belongs to a buffer shared with the other owner,
which the driver has no right to write to.
Cloned SKBs do reach this path: hci_send_cmd_sync() keeps a clone of every
HCI command in hdev->sent_cmd before handing the SKB to the driver, and
l2cap_ertm_send() clones SKBs for retransmission.
Replace the open-coded headroom check with skb_cow_head(), which both
guarantees the headroom and reallocates a private buffer when the SKB is
cloned. The cost is one reallocation and copy per cloned packet, the usual
price of this pattern in network drivers.
This has no observable effect on its own, as the driver only writes in
front of skb->data where no other owner looks. It is a prerequisite for
"Bluetooth: btmtksdio: Fix out-of-bounds DMA read in the TX path", which
writes padding behind skb->tail, and carries the same Fixes: tag so that
both are backported together.
Fixes: 9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Assisted-by: Claude:claude-opus-5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When the MTK_BT_RST_DONE poll times out, btmtk_usb_subsys_reset() logs
"Reset timeout" and keeps the error in err, but err is then overwritten
by the return value of the following btmtk_usb_id_get() call, so the
timeout is never reported to the caller.
Commit 25b6d7593a3a ("Bluetooth: btmtk: introduce btmtk reset work")
discarded the return value of the chip id read, so the function returned
the timeout error as intended. Commit 3dcb122b3064 ("Bluetooth: btusb:
mediatek: return error for failed reg access") started assigning err at
that call and silently dropped it.
Keep the timeout in a separate variable and return it, restoring the
original behaviour without changing the control flow.
Fixes: 3dcb122b3064 ("Bluetooth: btusb: mediatek: return error for failed reg access")
Signed-off-by: Ismail Tarim <ismailtarim7@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btmtk_usb_subsys_reset() validates the subsystem reset by reading the
chip id back. When that read succeeds at the bus level but yields an id
of zero, the reset has demonstrably not taken effect: the function logs
"Can't get device id, subsys reset fail." and then returns the return
value of btmtk_usb_id_get(), which in that case is zero, i.e. success.
btusb_mtk_reset() returns that value unchanged, so its caller cannot
tell a completed reset from a failed one.
Return -ENODEV when the chip id reads back as zero, leaving the existing
MT6639 exemption intact.
Observed on an MT7902 [13d3:3579]. The path can be reached on demand by
asking the controller for a coredump, since btmtk requests a reset once
the dump completes:
# echo 1 > /sys/class/bluetooth/hci0/device/coredump
Bluetooth: hci0: Mediatek coredump end
Bluetooth: hci0: Can't get device id, subsys reset fail.
usb 3-10: reset high-speed USB device number 5 using xhci_hcd
usb 3-10: device descriptor read/64, error -110
usb usb3-port10: attempt power cycle
usb usb3-port10: unable to enumerate USB device
The same sequence occurs unprompted when the controller firmware asserts
on its own.
Note that this corrects the error reporting only; it does not by itself
make the controller recoverable in the case above.
Fixes: 25b6d7593a3a ("Bluetooth: btmtk: introduce btmtk reset work")
Signed-off-by: Ismail Tarim <ismailtarim7@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
intel_set_power() calls pm_runtime_use_autosuspend() when powering on
the device, but the power-off path does not call the matching
pm_runtime_dont_use_autosuspend() before disabling runtime PM.
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped and usage_count remains
unbalanced.
Add the missing pm_runtime_dont_use_autosuspend() call before disabling
runtime PM.
This issue was found by manual code inspection.
Fixes: 74cdad37cd24 ("Bluetooth: hci_intel: Add runtime PM support")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
h5_btrtl_open() calls pm_runtime_use_autosuspend(), but
h5_btrtl_close() does not call the matching
pm_runtime_dont_use_autosuspend() when tearing down runtime PM.
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during driver teardown, this reference is not dropped and usage_count
remains unbalanced.
Add the missing pm_runtime_dont_use_autosuspend() call before disabling
runtime PM.
This issue was found by manual code inspection.
Fixes: d9dd833cf6d2 ("Bluetooth: hci_h5: Add runtime suspend")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
bcm_request_irq() calls pm_runtime_use_autosuspend(), but bcm_close()
does not call the matching pm_runtime_dont_use_autosuspend() when
tearing down runtime PM.
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during driver teardown, this reference is not dropped and usage_count
remains unbalanced.
Add the missing pm_runtime_dont_use_autosuspend() call before disabling
runtime PM.
This issue was found by manual code inspection.
Fixes: e88ab30d3669 ("Bluetooth: hci_bcm: Add suspend/resume runtime PM functions")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btmtksdio_setup() calls pm_runtime_use_autosuspend() when runtime PM
is supported, but btmtksdio_remove() does not call the matching
pm_runtime_dont_use_autosuspend() when removing the device.
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during driver teardown, this reference is not dropped and usage_count
remains unbalanced.
Add the missing pm_runtime_dont_use_autosuspend() call in the remove
path before restoring the runtime PM usage reference.
This issue was found by manual code inspection.
Fixes: 7f3c563c575e ("Bluetooth: btmtksdio: Add runtime PM support to SDIO based Bluetooth")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Power supply to the M.2 Bluetooth device attached to the host using M.2
connector is controlled using the 'uart' pwrseq device. So add support
for getting the pwrseq device if the OF graph link is present.
Once obtained, pwrseq_power_on() is called to power up the M.2 Bluetooth
card. The power sequencer descriptor is obtained via pwrseq_get() with
the UART controller device (serdev->ctrl->dev), since the OF graph
link is defined on the UART controller node.
Also add the explicit pwrseq_put() call in all exit paths, pwrseq_put()
already calls pwrseq_power_off() internally, so no separate
pwrseq_power_off() call is needed.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
nxp_set_ind_reset() injects the non-zero hardware error code
BTNXPUART_IR_HW_ERR.
Simplify it by __hci_reset_dev(hdev, BTNXPUART_IR_HW_ERR).
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Drop the check since:
- it is already implied by the existing (skb->len > HCI_EVENT_HDR_SIZE)
- hdr->plen is then not used by the function at all
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
For a diagnostics VSE, diagnostics_hdr[] sits at the start of the event
payload, skb->data[2], but btintel_recv_event() wrongly guards its
memcmp with @len, which is measured from skb->data[3] for the earlier
INTEL_BOOTLOADER check.
Fix by using (@len + 1) instead, which ==
(skb->len - HCI_EVENT_HDR_SIZE) exactly.
Fixes: af395330abed ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
