| Age | Commit message (Collapse) | Author |
|---|
|
Since commit 57eb14779dfd ("interconnect: qcom: icc-rpmh: Support child
NoC device probe") the icc-rpmh driver supports initializing child NoCs,
but those child NoCs also need to be able to get the parent's regmap in
order to enable QoS.
Change the driver to support that and support programming QoS register.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251114-sm6350-icc-qos-v2-2-6af348cb9c69@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add the clocks for some interconnects to the bindings that are required
to set up the QoS correctly. Update one of the examples to aggre2_noc to
have an example with clocks.
Also while we're at it, remove #interconnect-cells: true as that's
already provided from qcom,rpmh-common.yaml.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20251114-sm6350-icc-qos-v2-1-6af348cb9c69@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Currently most of Qualcomm interconnect drivers use static IDs, which
poses a threat of possible conflicts with other drivers. Rework RPMh
interconnect drivers to use dynamic IDs and drop static IDs
code.
* icc-dynamic-ids
interconnect: qcom: icc-rpmh: convert link_nodes to dynamic array
interconnect: qcom: sc7280: convert to dynamic IDs
interconnect: qcom: sc8180x: convert to dynamic IDs
interconnect: qcom: sc8280xp: convert to dynamic IDs
interconnect: qcom: sdm845: convert to dynamic IDs
interconnect: qcom: sm8250: convert to dynamic IDs
interconnect: qcom: x1e80100: convert to dynamic IDs
interconnect: qcom: qcs615: convert to dynamic IDs
interconnect: qcom: qcs8300: convert to dynamic IDs
interconnect: qcom: qdu1000: convert to dynamic IDs
interconnect: qcom: sar2130p: convert to dynamic IDs
interconnect: qcom: sc7180: convert to dynamic IDs
interconnect: qcom: sdm670: convert to dynamic IDs
interconnect: qcom: sdx55: convert to dynamic IDs
interconnect: qcom: sdx65: convert to dynamic IDs
interconnect: qcom: sdx75: convert to dynamic IDs
interconnect: qcom: sm6350: convert to dynamic IDs
interconnect: qcom: sm7150: convert to dynamic IDs
interconnect: qcom: sm8150: convert to dynamic IDs
interconnect: qcom: sm8350: convert to dynamic IDs
interconnect: qcom: sm8450: convert to dynamic IDs
interconnect: qcom: sm8550: convert to dynamic IDs
interconnect: qcom: sm8650: convert to dynamic IDs
interconnect: qcom: sm8750: convert to dynamic IDs
interconnect: qcom: icc-rpmh: drop support for non-dynamic IDS
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-0-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add interconnect dt-bindings and driver support for Qualcomm Kaanapali SoC.
* icc-kaanapali
dt-bindings: interconnect: document the RPMh Network-On-Chip interconnect in Kaanapali SoC
interconnect: qcom: add Kaanapali interconnect provider driver
dt-bindings: interconnect: qcom-bwmon: Document Kaanapali BWMONs
Link: https://lore.kernel.org/r/20251031-knp-interconnect-v4-0-568bba2cb3e5@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Document the Kaanapali BWMONs, which have one instance per
cluster of BWMONv4.
Signed-off-by: Amir Vajid <amir.vajid@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250924-knp-bwmon-v1-1-56a9cdda7d72@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Now as all RPMh interconnect drivers were converted to using the dynamic
IDs, drop support for non-dynamic ID allocation.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-25-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-24-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on QRD8650
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-23-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on QRD8550
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-22-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-21-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-20-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-19-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-18-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-17-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-16-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-15-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-14-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-13-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-12-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-11-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-10-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-9-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-8-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-7-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-6-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-5-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-4-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-3-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-2-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Declaring link_nodes as a double-pointer results in a syntax sugar in
the interconnect driver to typecast the array. Change the type of
link_nodes field to the array to remove the need for the extra typecast.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-1-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add driver for the Qualcomm interconnect buses found in Kaanapali
based platforms. The topology consists of several NoCs that are
controlled by a remote processor that collects the aggregated
bandwidth for each master-slave pairs.
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-knp-interconnect-v4-2-568bba2cb3e5@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Kaanapali SoC
Document the RPMh Network-On-Chip Interconnect of the Kaanapali platform.
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251031-knp-interconnect-v4-1-568bba2cb3e5@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
This enables QoS configuration for QNOC type device which can be found
on SA8775P platform. It enables QoS configuration for master ports with
predefined priority and urgency forwarding. This helps in prioritizing
the traffic originating from different interconnect masters at NOC.
The system may function normally without this feature. However, enabling
QoS helps optimize latency and bandwidth across subsystems like CPU, GPU,
and multimedia engines, which becomes important in high-throughput
scenarios. This is a feature aimed at performance enhancement to improve
system performance under concurrent workloads.
* icc-sa8775p
dt-bindings: interconnect: add reg and clocks properties to enable QoS on sa8775p
interconnect: qcom: sa8775p: enable QoS configuration
Link: https://lore.kernel.org/r/20251001073344.6599-1-odelu.kukatla@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Drop the QPIC interconnect and BCM nodes for the SDX75 SoC. The reason
is that this QPIC BCM resource is already defined as a RPMh clock in
clk-rpmh driver as like other SDX SoCs. So it is wrong to describe the
same resource in two different providers.
Also, without this series, the NAND driver fails to probe on SDX75 as
the interconnect sync state disables the QPIC nodes as there were no
clients voting for this ICC resource. However, the NAND driver had already
voted for this BCM resource through the clk-rpmh driver. Since both votes
come from Linux, RPMh was unable to distinguish between these two and ends
up disabling the resource during sync state.
* icc-sdx75
interconnect: qcom: sdx75: Drop QPIC interconnect and BCM nodes
dt-bindings: interconnect: qcom: Drop QPIC_CORE IDs
Link: https://lore.kernel.org/r/20250926-sdx75-icc-v2-0-20d6820e455c@oss.qualcomm.com>
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The lack of the interconnects for the USB2 host might result in the
register writes for the PHY not reaching the PHY and thus the PLL not
locking up, resulting in -EBUSY errors for the USB host on the platform.
Add missing interconnect link and add interconnect paths to the USB2
device.
* icc-msm8996
interconnect: qcom: msm8996: add missing link to SLAVE_USB_HS
arm64: dts: qcom: msm8996: add interconnect paths to USB2 controller
Link: https://lore.kernel.org/r/20251002-fix-msm8996-icc-v1-0-a36a05d1f869@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The icc_commit_set() function, used by the debugfs interface, checks
the validity of the global cur_path pointer using IS_ERR_OR_NULL().
However, in the specific case where cur_path is NULL, while
IS_ERR_OR_NULL(NULL) correctly evaluates to true, the subsequent call
to PTR_ERR(NULL) returns 0.
This causes the function to return a success code (0) instead of an
error, misleading the user into believing their bandwidth request was
successfully committed when, in fact, no operation was performed.
Fix this by adding an explicit check to return -EINVAL if cur_path is
NULL. This prevents silent failures and ensures that an invalid
operational sequence is immediately and clearly reported as an error.
Fixes: 770c69f037c1 ("interconnect: Add debugfs test client")
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20251010151447.2289779-1-visitorckw@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
As like other SDX targets, SDX75 QPIC BCM resource is also modeled as a
RPMh clock in clk-rpmh driver. However, for SDX75, this resource was also
described as an interconnect node mistakenly.
Hence, drop the QPIC interconnect IDs and let the clients use clk-rpmh
driver to vote for this resource.
Even though this change is an ABI break, it is necessary to avoid
describing the same resource provider in two different drivers, as it may
lead to votes from clients overriding each other.
Fixes: 956329ec7c5e ("dt-bindings: interconnect: Add compatibles for SDX75")
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
[mani: kept the QUP defines value unchanged]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250926-sdx75-icc-v2-2-20d6820e455c@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
As like other SDX SoCs, SDX75 SoC's QPIC BCM resource was modeled as a
RPMh clock in clk-rpmh driver. However, for SDX75, this resource was also
described as an interconnect and BCM node mistakenly. It is incorrect to
describe the same resource in two different providers, as it will lead to
votes from clients overriding each other.
Hence, drop the QPIC interconnect and BCM nodes and let the clients use
clk-rpmh driver to vote for this resource.
Without this change, the NAND driver fails to probe on SDX75, as the
interconnect sync state disables the QPIC nodes as there were no clients
voting for this ICC resource. However, the NAND driver had already voted
for this BCM resource through the clk-rpmh driver. Since both votes come
from Linux, RPMh was unable to distinguish between these two and ends up
disabling the QPIC resource during sync state.
Cc: stable@vger.kernel.org
Fixes: 3642b4e5cbfe ("interconnect: qcom: Add SDX75 interconnect provider driver")
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
[mani: dropped the reference to bcm_qp0, reworded description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Lakshmi Sowjanya D <quic_laksd@quicinc.com> # on SDX75
Link: https://lore.kernel.org/r/20250926-sdx75-icc-v2-1-20d6820e455c@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Enable QoS configuration for master ports with predefinedi priority
and urgency forwarding.
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251001073344.6599-3-odelu.kukatla@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
sa8775p
Add 'reg' and 'clocks' properties to enable QoS configuration. These
properties enable access to QoS registers and necessary clocks for
configuration.
QoS configuration is essential for ensuring that latency sensitive
components such as CPUs and multimedia engines receive prioritized
access to memory and interconnect resources. This helps to manage
bandwidth and latency across subsystems, improving system responsiveness
and performance in concurrent workloads.
Both 'reg' and 'clocks' properties are optional. If either is missing,
QoS configuration will be skipped. This behavior is controlled by the
'qos_requires_clocks' flag in the driver, which ensures that QoS
configuration is bypassed when required clocks are not defined.
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251001073344.6599-2-odelu.kukatla@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add the missing interconnects to the USB2 host. The Fixes tag points to
the commit which broke probing of the USB host on that platform.
Fixes: 130733a10079 ("interconnect: qcom: msm8996: Promote to core_initcall")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20251002-fix-msm8996-icc-v1-2-a36a05d1f869@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
>From the initial submission the interconnect driver missed the link from
SNOC_PNOC to the USB 2 configuration space. Add missing link in order to
let the platform configure and utilize this path.
Fixes: 7add937f5222 ("interconnect: qcom: Add MSM8996 interconnect provider driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251002-fix-msm8996-icc-v1-1-a36a05d1f869@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The current expansion of kbps_to_icc() introduces unnecessary logic
when compiled from a general expression. Rewriting it allows compilers
to emit shorter and more efficient code across architectures.
For example, with gcc -O2:
arm64:
old:
tst x0, 7
add w1, w0, 7
cset w2, ne
cmp w0, 0
csel w0, w1, w0, lt
add w0, w2, w0, asr 3
new:
add w1, w0, 14
adds w0, w0, 7
csel w0, w1, w0, mi
asr w0, w0, 3
x86-64:
old:
xor eax, eax
test dil, 7
lea edx, [rdi+7]
setne al
test edi, edi
cmovns edx, edi
sar edx, 3
add eax, edx
new:
lea eax, [rdi+14]
add edi, 7
cmovns eax, edi
sar eax, 3
In both cases the old form relies on extra test and compare
instructions (tst, test, cmp) combined with conditional moves or sets,
while the new form uses fewer instructions by folding the addition and
flag update together (adds on arm64, add on x86).
This reduces the instruction sequence, prevents multiple evaluations of
x when it is an expression or a function call, and keeps the macro
simpler.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20250930043055.2200322-1-visitorckw@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"One revert because of a regression in the I2C core which has sadly not
showed up during its time in -next"
* tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: boardinfo: Annotate code used in init phase only"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Skip interrupt ID 0 in sifive-plic during suspend/resume because
ID 0 is reserved and accessing reserved register space could result
in undefined behavior
- Fix a function's retval check in aspeed-scu-ic
* tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Avoid interrupt ID 0 handling during suspend/resume
irqchip/aspeed-scu-ic: Fix an IS_ERR() vs NULL check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"The previous fix to trace_marker required updating trace_marker_raw as
well. The difference between trace_marker_raw from trace_marker is
that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings. This
is for applications that will read the raw data from the ring buffer
and get the data structures directly. It's a bit quicker than using
the ASCII version.
Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:
- Fix tracing_mark_raw_write() to use per CPU buffer
The fix to use the per CPU buffer to copy from user space was
needed for both the trace_maker and trace_maker_raw file.
The fix for reading from user space into per CPU buffers properly
fixed the trace_marker write function, but the trace_marker_raw
file wasn't fixed properly. The user space data was correctly
written into the per CPU buffer, but the code that wrote into the
ring buffer still used the user space pointer and not the per CPU
buffer that had the user space data already written.
- Stop the fortify string warning from writing into trace_marker_raw
After converting the copy_from_user_nofault() into a memcpy(),
another issue appeared. As writes to the trace_marker_raw expects
binary data, the first entry is a 4 byte identifier. The entry
structure is defined as:
struct {
struct trace_entry ent;
int id;
char buf[];
};
The size of this structure is reserved on the ring buffer with:
size = sizeof(*entry) + cnt;
Then it is copied from the buffer into the ring buffer with:
memcpy(&entry->id, buf, cnt);
This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.
The allocated space is actually more than what is copied, as the
cnt used also includes the entry->id portion. Allocating
sizeof(*entry) plus cnt is actually allocating 4 bytes more than
what is needed.
Change the size function to:
size = struct_size(entry, buf, cnt - sizeof(entry->id));
And update the memcpy() to unsafe_memcpy()"
* tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Stop fortify-string from warning in tracing_mark_raw_write()
tracing: Fix tracing_mark_raw_write() to use buf and not ubuf
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Fix UAPI types check in headers_check.pl
- Only enable -Werror for hostprogs with CONFIG_WERROR / W=e
- Ignore fsync() error when output of gen_init_cpio is a pipe
- Several little build fixes for recent modules.builtin.modinfo series
* tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Use '--strip-unneeded-symbol' for removing module device table symbols
s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections
kbuild: Add '.rel.*' strip pattern for vmlinux
kbuild: Restore pattern to avoid stripping .rela.dyn from vmlinux
gen_init_cpio: Ignore fsync() returning EINVAL on pipes
scripts/Makefile.extrawarn: Respect CONFIG_WERROR / W=e for hostprogs
kbuild: uapi: Strip comments before size type check
|
|
This reverts commit 1a2b423be6a89dd07d5fc27ea042be68697a6a49 because we
got a regression report and need time to find out the details.
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/r/29ec0082-4dd4-4120-acd2-44b35b4b9487@oss.qualcomm.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"This cycle, we have a new RTC driver, for the SpacemiT P1. The optee
driver gets alarm support. We also get a fix for a race condition that
was fairly rare unless while stress testing the alarms.
Subsystem:
- Fix race when setting alarm
- Ensure alarm irq is enabled when UIE is enabled
- remove unneeded 'fast_io' parameter in regmap_config
New driver:
- SpacemiT P1 RTC
Drivers:
- efi: Remove wakeup functionality
- optee: add alarms support
- s3c: Drop support for S3C2410
- zynqmp: Restore alarm functionality after kexec transition"
* tag 'rtc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (29 commits)
rtc: interface: Ensure alarm irq is enabled when UIE is enabled
rtc: tps6586x: Fix initial enable_irq/disable_irq balance
rtc: cpcap: Fix initial enable_irq/disable_irq balance
rtc: isl12022: Fix initial enable_irq/disable_irq balance
rtc: interface: Fix long-standing race when setting alarm
rtc: pcf2127: fix watchdog interrupt mask on pcf2131
rtc: zynqmp: Restore alarm functionality after kexec transition
rtc: amlogic-a4: Optimize global variables
rtc: sd2405al: Add I2C address.
rtc: Kconfig: move symbols to proper section
rtc: optee: make optee_rtc_pm_ops static
rtc: optee: Fix error code in optee_rtc_read_alarm()
rtc: optee: fix error code in probe()
dt-bindings: rtc: Convert apm,xgene-rtc to DT schema
rtc: spacemit: support the SpacemiT P1 RTC
rtc: optee: add alarm related rtc ops to optee rtc driver
rtc: optee: remove unnecessary memory operations
rtc: optee: fix memory leak on driver removal
rtc: x1205: Fix Xicor X1205 vendor prefix
dt-bindings: rtc: Fix Xicor X1205 vendor prefix
...
|
