From fc8a350d0b8df744fd6d3c55907b3886979d2638 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Wed, 13 May 2015 14:34:07 +0300 Subject: iwlwifi: pcie: fix tracking of cmd_in_flight The cmd_in_flight tracking was introduced to workaround faulty power management hardware, by having the driver keep the NIC awake as long as there are commands in flight. However, some of the code handling this workaround was unconditionally executed, which resulted with an inconsistent state where the driver assumed that the NIC was awake although it wasn't. Fix this by renaming 'cmd_in_flight' to 'cmd_hold_nic_awake' and handling the NIC requested awake state only for hardwares for which the workaround is needed. Signed-off-by: Ilan Peer Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/internal.h | 6 +++--- drivers/net/wireless/iwlwifi/pcie/trans.c | 4 ++-- drivers/net/wireless/iwlwifi/pcie/tx.c | 23 +++++++++-------------- 3 files changed, 14 insertions(+), 19 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index 01996c9d98a7..376b84e54ad7 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -1,7 +1,7 @@ /****************************************************************************** * - * Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2003 - 2015 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * * Portions of this file are derived from the ipw3945 project, as well * as portions of the ieee80211 subsystem header files. @@ -320,7 +320,7 @@ struct iwl_trans_pcie { /*protect hw register */ spinlock_t reg_lock; - bool cmd_in_flight; + bool cmd_hold_nic_awake; bool ref_cmd_in_flight; /* protect ref counter */ diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index d6f6515fe663..dc179094e6a0 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1372,7 +1372,7 @@ static bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans, bool silent, spin_lock_irqsave(&trans_pcie->reg_lock, *flags); - if (trans_pcie->cmd_in_flight) + if (trans_pcie->cmd_hold_nic_awake) goto out; /* this bit wakes up the NIC */ @@ -1438,7 +1438,7 @@ static void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans, */ __acquire(&trans_pcie->reg_lock); - if (trans_pcie->cmd_in_flight) + if (trans_pcie->cmd_hold_nic_awake) goto out; __iwl_trans_pcie_clear_bit(trans, CSR_GP_CNTRL, diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 06952aadfd7b..5ef8044c2ea3 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -1039,18 +1039,14 @@ static int iwl_pcie_set_cmd_in_flight(struct iwl_trans *trans, iwl_trans_pcie_ref(trans); } - if (trans_pcie->cmd_in_flight) - return 0; - - trans_pcie->cmd_in_flight = true; - /* * wake up the NIC to make sure that the firmware will see the host * command - we will let the NIC sleep once all the host commands * returned. This needs to be done only on NICs that have * apmg_wake_up_wa set. */ - if (trans->cfg->base_params->apmg_wake_up_wa) { + if (trans->cfg->base_params->apmg_wake_up_wa && + !trans_pcie->cmd_hold_nic_awake) { __iwl_trans_pcie_set_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000) @@ -1064,10 +1060,10 @@ static int iwl_pcie_set_cmd_in_flight(struct iwl_trans *trans, if (ret < 0) { __iwl_trans_pcie_clear_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - trans_pcie->cmd_in_flight = false; IWL_ERR(trans, "Failed to wake NIC for hcmd\n"); return -EIO; } + trans_pcie->cmd_hold_nic_awake = true; } return 0; @@ -1085,15 +1081,14 @@ static int iwl_pcie_clear_cmd_in_flight(struct iwl_trans *trans) iwl_trans_pcie_unref(trans); } - if (WARN_ON(!trans_pcie->cmd_in_flight)) - return 0; - - trans_pcie->cmd_in_flight = false; + if (trans->cfg->base_params->apmg_wake_up_wa) { + if (WARN_ON(!trans_pcie->cmd_hold_nic_awake)) + return 0; - if (trans->cfg->base_params->apmg_wake_up_wa) + trans_pcie->cmd_hold_nic_awake = false; __iwl_trans_pcie_clear_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - + CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + } return 0; } -- cgit v1.2.3 From f115fdfd61bd627e99d636bb61a3d3ff93397048 Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Tue, 19 May 2015 14:20:25 +0300 Subject: iwlwifi: nvm: fix otp parsing in 8000 hw family The radio cfg DWORD was taken from the wrong place in the 8000 HW family, after a line in the code was wrongly changed by mistake. This broke several 8260 devices. Fixes: 5dd9c68a854a ("iwlwifi: drop support for early versions of 8000") Signed-off-by: Liad Kaufman Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-nvm-parse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c index 75e96db6626b..8e604a3931ca 100644 --- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c @@ -471,7 +471,7 @@ static int iwl_get_radio_cfg(const struct iwl_cfg *cfg, const __le16 *nvm_sw, if (cfg->device_family != IWL_DEVICE_FAMILY_8000) return le16_to_cpup(nvm_sw + RADIO_CFG); - return le32_to_cpup((__le32 *)(nvm_sw + RADIO_CFG_FAMILY_8000)); + return le32_to_cpup((__le32 *)(phy_sku + RADIO_CFG_FAMILY_8000)); } -- cgit v1.2.3 From 7d072b404c5d8f1e0b62b6bc488dfeaa61bd2d8d Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 26 May 2015 13:19:46 +0200 Subject: brcmfmac: avoid null pointer access when brcmf_msgbuf_get_pktid() fails The function brcmf_msgbuf_get_pktid() may return a NULL pointer so the callers should check the return pointer before accessing it to avoid the crash below (see [1]): brcmfmac: brcmf_msgbuf_get_pktid: Invalid packet id 273 (not in use) BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 IP: [] skb_pull+0x5/0x50 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: pci_stub vboxpci(O) vboxnetflt(O) vboxnetadp(O) vboxdrv(O) snd_hda_codec_hdmi bnep mousedev hid_generic ushwmon msr ext4 crc16 mbcache jbd2 sd_mod uas usb_storage ahci libahci libata scsi_mod xhci_pci xhci_hcd usbcore usb_common CPU: 0 PID: 1661 Comm: irq/61-brcmf_pc Tainted: G O 4.0.1-MacbookPro-ARCH #1 Hardware name: Apple Inc. MacBookPro12,1/Mac-E43C1C25D4880AD6, BIOS MBP121.88Z.0167.B02.1503241251 03/24/2015 task: ffff880264203cc0 ti: ffff88025ffe4000 task.ti: ffff88025ffe4000 RIP: 0010:[] [] skb_pull+0x5/0x50 RSP: 0018:ffff88025ffe7d40 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88008a33c000 RCX: 0000000000000044 RDX: 0000000000000000 RSI: 000000000000004a RDI: 0000000000000000 RBP: ffff88025ffe7da8 R08: 0000000000000096 R09: 000000000000004a R10: 0000000000000000 R11: 000000000000048e R12: ffff88025ff14f00 R13: 0000000000000000 R14: ffff880263b48200 R15: ffff88008a33c000 FS: 0000000000000000(0000) GS:ffff88026ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 000000000180b000 CR4: 00000000003407f0 Stack: ffffffffa06aed74 ffff88025ffe7dc8 ffff880263b48270 ffff880263b48278 05ea88020000004a 0002ffff81014635 000000001720b2f6 ffff88026ec116c0 ffff880263b48200 0000000000010000 ffff880263b4ae00 ffff880264203cc0 Call Trace: [] ? brcmf_msgbuf_process_rx+0x404/0x480 [brcmfmac] [] ? irq_finalize_oneshot.part.30+0xf0/0xf0 [] brcmf_proto_msgbuf_rx_trigger+0x35/0xf0 [brcmfmac] [] brcmf_pcie_isr_thread_v2+0x8a/0x130 [brcmfmac] [] irq_thread_fn+0x20/0x50 [] irq_thread+0x13f/0x170 [] ? wake_threads_waitq+0x30/0x30 [] ? irq_thread_dtor+0xb0/0xb0 [] kthread+0xd8/0xf0 [] ? kthread_create_on_node+0x1c0/0x1c0 [] ret_from_fork+0x58/0x90 [] ? kthread_create_on_node+0x1c0/0x1c0 Code: 01 83 e2 f7 88 50 01 48 83 c4 08 5b 5d f3 c3 0f 1f 80 00 00 00 00 83 e2 f7 88 50 01 c3 66 0f 1f 84 00 00 00 00 00 0f 1f RIP [] skb_pull+0x5/0x50 RSP CR2: 0000000000000080 ---[ end trace b074c0f90e7c997d ]--- [1] http://mid.gmane.org/20150430193259.GA5630@googlemail.com Cc: # v3.18, v3.19, v4.0, v4.1 Reported-by: Michael Hornung Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c index 4ec9811f49c8..65efb1468988 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c @@ -511,11 +511,9 @@ static int brcmf_msgbuf_query_dcmd(struct brcmf_pub *drvr, int ifidx, msgbuf->rx_pktids, msgbuf->ioctl_resp_pktid); if (msgbuf->ioctl_resp_ret_len != 0) { - if (!skb) { - brcmf_err("Invalid packet id idx recv'd %d\n", - msgbuf->ioctl_resp_pktid); + if (!skb) return -EBADF; - } + memcpy(buf, skb->data, (len < msgbuf->ioctl_resp_ret_len) ? len : msgbuf->ioctl_resp_ret_len); } @@ -874,10 +872,8 @@ brcmf_msgbuf_process_txstatus(struct brcmf_msgbuf *msgbuf, void *buf) flowid -= BRCMF_NROF_H2D_COMMON_MSGRINGS; skb = brcmf_msgbuf_get_pktid(msgbuf->drvr->bus_if->dev, msgbuf->tx_pktids, idx); - if (!skb) { - brcmf_err("Invalid packet id idx recv'd %d\n", idx); + if (!skb) return; - } set_bit(flowid, msgbuf->txstatus_done_map); commonring = msgbuf->flowrings[flowid]; @@ -1156,6 +1152,8 @@ brcmf_msgbuf_process_rx_complete(struct brcmf_msgbuf *msgbuf, void *buf) skb = brcmf_msgbuf_get_pktid(msgbuf->drvr->bus_if->dev, msgbuf->rx_pktids, idx); + if (!skb) + return; if (data_offset) skb_pull(skb, data_offset); -- cgit v1.2.3 From e236b954232808001f522c4b79df97b8c9262a4a Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Thu, 28 May 2015 23:10:06 +0200 Subject: bna: fix firmware loading on big-endian machines Firmware required by bna is stored in appropriate files as sequence of LE32 integers. After loading by request_firmware() they need to be byte-swapped on big-endian arches. Without this conversion the NIC is unusable on big-endian machines. Cc: Rasesh Mody Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/cna_fwimg.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/brocade/bna/cna_fwimg.c b/drivers/net/ethernet/brocade/bna/cna_fwimg.c index ebf462d8082f..badea368bdc8 100644 --- a/drivers/net/ethernet/brocade/bna/cna_fwimg.c +++ b/drivers/net/ethernet/brocade/bna/cna_fwimg.c @@ -30,6 +30,7 @@ cna_read_firmware(struct pci_dev *pdev, u32 **bfi_image, u32 *bfi_image_size, char *fw_name) { const struct firmware *fw; + u32 n; if (request_firmware(&fw, fw_name, &pdev->dev)) { pr_alert("Can't locate firmware %s\n", fw_name); @@ -40,6 +41,12 @@ cna_read_firmware(struct pci_dev *pdev, u32 **bfi_image, *bfi_image_size = fw->size/sizeof(u32); bfi_fw = fw; + /* Convert loaded firmware to host order as it is stored in file + * as sequence of LE32 integers. + */ + for (n = 0; n < *bfi_image_size; n++) + le32_to_cpus(*bfi_image + n); + return *bfi_image; error: return NULL; -- cgit v1.2.3 From 4918eb1e7cd3b8a41ebf56b5fabaa334139b919f Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Thu, 28 May 2015 23:10:07 +0200 Subject: bna: remove unreasonable iocpf timer start Driver starts iocpf timer prior bnad_ioceth_enable() call and this is unreasonable. This piece of code probably originates from Brocade/Qlogic out-of-box driver during initial import into upstream. This driver uses only one timer and queue to implement multiple timers and this timer is started at this place. The upstream driver uses multiple timers instead of this. Cc: Rasesh Mody Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c index 37072a83f9d6..caae6cb2bc1a 100644 --- a/drivers/net/ethernet/brocade/bna/bnad.c +++ b/drivers/net/ethernet/brocade/bna/bnad.c @@ -3701,10 +3701,6 @@ bnad_pci_probe(struct pci_dev *pdev, setup_timer(&bnad->bna.ioceth.ioc.sem_timer, bnad_iocpf_sem_timeout, ((unsigned long)bnad)); - /* Now start the timer before calling IOC */ - mod_timer(&bnad->bna.ioceth.ioc.iocpf_timer, - jiffies + msecs_to_jiffies(BNA_IOC_TIMER_FREQ)); - /* * Start the chip * If the call back comes with error, we bail out. -- cgit v1.2.3 From 4818e856475b309667ee38d4d0f2e3c1b933feef Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Thu, 28 May 2015 23:10:08 +0200 Subject: bna: fix soft lock-up during firmware initialization failure Bug in the driver initialization causes soft-lockup if firmware initialization timeout is reached. Polling function bfa_ioc_poll_fwinit() incorrectly calls bfa_nw_iocpf_timeout() when the timeout is reached. The problem is that bfa_nw_iocpf_timeout() calls again bfa_ioc_poll_fwinit()... etc. The bfa_ioc_poll_fwinit() should directly send timeout event for iocpf and the same should be done if firmware download into HW fails. Cc: Rasesh Mody Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bfa_ioc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c index 594a2ab36d31..68f3c13c9ef6 100644 --- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c +++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c @@ -2414,7 +2414,7 @@ bfa_ioc_boot(struct bfa_ioc *ioc, enum bfi_fwboot_type boot_type, if (status == BFA_STATUS_OK) bfa_ioc_lpu_start(ioc); else - bfa_nw_iocpf_timeout(ioc); + bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_TIMEOUT); return status; } @@ -3029,7 +3029,7 @@ bfa_ioc_poll_fwinit(struct bfa_ioc *ioc) } if (ioc->iocpf.poll_time >= BFA_IOC_TOV) { - bfa_nw_iocpf_timeout(ioc); + bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_TIMEOUT); } else { ioc->iocpf.poll_time += BFA_IOC_POLL_TOV; mod_timer(&ioc->iocpf_timer, jiffies + -- cgit v1.2.3 From 9eb0a5d1905235b968dce5c1fda294ac2663d840 Mon Sep 17 00:00:00 2001 From: Daniel Pieczko Date: Fri, 29 May 2015 12:25:54 +0100 Subject: sfc: free multiple Rx buffers when required When Rx packet data must be dropped, all the buffers associated with that Rx packet must be freed. Extend and rename efx_free_rx_buffer() to efx_free_rx_buffers() and loop through all the fragments. By doing so this patch fixes a possible memory leak. Signed-off-by: Shradha Shah Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/rx.c | 42 +++++++++++++++++++++++++----------------- 1 file changed, 25 insertions(+), 17 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/sfc/rx.c b/drivers/net/ethernet/sfc/rx.c index c0ad95d2f63d..809ea4610a77 100644 --- a/drivers/net/ethernet/sfc/rx.c +++ b/drivers/net/ethernet/sfc/rx.c @@ -224,12 +224,17 @@ static void efx_unmap_rx_buffer(struct efx_nic *efx, } } -static void efx_free_rx_buffer(struct efx_rx_buffer *rx_buf) +static void efx_free_rx_buffers(struct efx_rx_queue *rx_queue, + struct efx_rx_buffer *rx_buf, + unsigned int num_bufs) { - if (rx_buf->page) { - put_page(rx_buf->page); - rx_buf->page = NULL; - } + do { + if (rx_buf->page) { + put_page(rx_buf->page); + rx_buf->page = NULL; + } + rx_buf = efx_rx_buf_next(rx_queue, rx_buf); + } while (--num_bufs); } /* Attempt to recycle the page if there is an RX recycle ring; the page can @@ -278,7 +283,7 @@ static void efx_fini_rx_buffer(struct efx_rx_queue *rx_queue, /* If this is the last buffer in a page, unmap and free it. */ if (rx_buf->flags & EFX_RX_BUF_LAST_IN_PAGE) { efx_unmap_rx_buffer(rx_queue->efx, rx_buf); - efx_free_rx_buffer(rx_buf); + efx_free_rx_buffers(rx_queue, rx_buf, 1); } rx_buf->page = NULL; } @@ -304,10 +309,7 @@ static void efx_discard_rx_packet(struct efx_channel *channel, efx_recycle_rx_pages(channel, rx_buf, n_frags); - do { - efx_free_rx_buffer(rx_buf); - rx_buf = efx_rx_buf_next(rx_queue, rx_buf); - } while (--n_frags); + efx_free_rx_buffers(rx_queue, rx_buf, n_frags); } /** @@ -431,11 +433,10 @@ efx_rx_packet_gro(struct efx_channel *channel, struct efx_rx_buffer *rx_buf, skb = napi_get_frags(napi); if (unlikely(!skb)) { - while (n_frags--) { - put_page(rx_buf->page); - rx_buf->page = NULL; - rx_buf = efx_rx_buf_next(&channel->rx_queue, rx_buf); - } + struct efx_rx_queue *rx_queue; + + rx_queue = efx_channel_get_rx_queue(channel); + efx_free_rx_buffers(rx_queue, rx_buf, n_frags); return; } @@ -622,7 +623,10 @@ static void efx_rx_deliver(struct efx_channel *channel, u8 *eh, skb = efx_rx_mk_skb(channel, rx_buf, n_frags, eh, hdr_len); if (unlikely(skb == NULL)) { - efx_free_rx_buffer(rx_buf); + struct efx_rx_queue *rx_queue; + + rx_queue = efx_channel_get_rx_queue(channel); + efx_free_rx_buffers(rx_queue, rx_buf, n_frags); return; } skb_record_rx_queue(skb, channel->rx_queue.core_index); @@ -661,8 +665,12 @@ void __efx_rx_packet(struct efx_channel *channel) * loopback layer, and free the rx_buf here */ if (unlikely(efx->loopback_selftest)) { + struct efx_rx_queue *rx_queue; + efx_loopback_rx_packet(efx, eh, rx_buf->len); - efx_free_rx_buffer(rx_buf); + rx_queue = efx_channel_get_rx_queue(channel); + efx_free_rx_buffers(rx_queue, rx_buf, + channel->rx_pkt_n_frags); goto out; } -- cgit v1.2.3 From dc5e7a811d3e57f2b10a4c4c90b175ce498a097d Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Mon, 1 Jun 2015 11:30:04 +0100 Subject: xen: netback: fix printf format string warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/net/xen-netback/netback.c: In function ‘xenvif_tx_build_gops’: drivers/net/xen-netback/netback.c:1253:8: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘int’ [-Wformat=] (txreq.offset&~PAGE_MASK) + txreq.size); ^ PAGE_MASK's type can vary by arch, so a cast is needed. Signed-off-by: Ian Campbell ---- v2: Cast to unsigned long, since PAGE_MASK can vary by arch. Acked-by: Wei Liu Signed-off-by: David S. Miller --- drivers/net/xen-netback/netback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 4de46aa61d95..0d2594395ffb 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -1250,7 +1250,7 @@ static void xenvif_tx_build_gops(struct xenvif_queue *queue, netdev_err(queue->vif->dev, "txreq.offset: %x, size: %u, end: %lu\n", txreq.offset, txreq.size, - (txreq.offset&~PAGE_MASK) + txreq.size); + (unsigned long)(txreq.offset&~PAGE_MASK) + txreq.size); xenvif_fatal_tx_err(queue->vif); break; } -- cgit v1.2.3 From 31a418986a5852034d520a5bab546821ff1ccf3d Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Mon, 1 Jun 2015 11:30:24 +0100 Subject: xen: netback: read hotplug script once at start of day. When we come to tear things down in netback_remove() and generate the uevent it is possible that the xenstore directory has already been removed (details below). In such cases netback_uevent() won't be able to read the hotplug script and will write a xenstore error node. A recent change to the hypervisor exposed this race such that we now sometimes lose it (where apparently we didn't ever before). Instead read the hotplug script configuration during setup and use it for the lifetime of the backend device. The apparently more obvious fix of moving the transition to state=Closed in netback_remove() to after the uevent does not work because it is possible that we are already in state=Closed (in reaction to the guest having disconnected as it shutdown). Being already in Closed means the toolstack is at liberty to start tearing down the xenstore directories. In principal it might be possible to arrange to unregister the device sooner (e.g on transition to Closing) such that xenstore would still be there but this state machine is fragile and prone to anger... A modern Xen system only relies on the hotplug uevent for driver domains, when the backend is in the same domain as the toolstack it will run the necessary setup/teardown directly in the correct sequence wrt xenstore changes. Signed-off-by: Ian Campbell Acked-by: Wei Liu Signed-off-by: David S. Miller --- drivers/net/xen-netback/xenbus.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c index fee02414529e..968787abf78d 100644 --- a/drivers/net/xen-netback/xenbus.c +++ b/drivers/net/xen-netback/xenbus.c @@ -34,6 +34,8 @@ struct backend_info { enum xenbus_state frontend_state; struct xenbus_watch hotplug_status_watch; u8 have_hotplug_status_watch:1; + + const char *hotplug_script; }; static int connect_rings(struct backend_info *be, struct xenvif_queue *queue); @@ -238,6 +240,7 @@ static int netback_remove(struct xenbus_device *dev) xenvif_free(be->vif); be->vif = NULL; } + kfree(be->hotplug_script); kfree(be); dev_set_drvdata(&dev->dev, NULL); return 0; @@ -255,6 +258,7 @@ static int netback_probe(struct xenbus_device *dev, struct xenbus_transaction xbt; int err; int sg; + const char *script; struct backend_info *be = kzalloc(sizeof(struct backend_info), GFP_KERNEL); if (!be) { @@ -347,6 +351,15 @@ static int netback_probe(struct xenbus_device *dev, if (err) pr_debug("Error writing multi-queue-max-queues\n"); + script = xenbus_read(XBT_NIL, dev->nodename, "script", NULL); + if (IS_ERR(script)) { + err = PTR_ERR(script); + xenbus_dev_fatal(dev, err, "reading script"); + goto fail; + } + + be->hotplug_script = script; + err = xenbus_switch_state(dev, XenbusStateInitWait); if (err) goto fail; @@ -379,22 +392,14 @@ static int netback_uevent(struct xenbus_device *xdev, struct kobj_uevent_env *env) { struct backend_info *be = dev_get_drvdata(&xdev->dev); - char *val; - val = xenbus_read(XBT_NIL, xdev->nodename, "script", NULL); - if (IS_ERR(val)) { - int err = PTR_ERR(val); - xenbus_dev_fatal(xdev, err, "reading script"); - return err; - } else { - if (add_uevent_var(env, "script=%s", val)) { - kfree(val); - return -ENOMEM; - } - kfree(val); - } + if (!be) + return 0; + + if (add_uevent_var(env, "script=%s", be->hotplug_script)) + return -ENOMEM; - if (!be || !be->vif) + if (!be->vif) return 0; return add_uevent_var(env, "vif=%s", be->vif->dev->name); -- cgit v1.2.3 From c6e36d8c1a76be7a7afa2669483857dadec1e99c Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 1 Jun 2015 15:08:18 +0300 Subject: bnx2x: Move statistics implementation into semaphores Commit dff173de84958 ("bnx2x: Fix statistics locking scheme") changed the bnx2x locking around statistics state into using a mutex - but the lock is being accessed via a timer which is forbidden. [If compiled with CONFIG_DEBUG_MUTEXES, logs show a warning about accessing the mutex in interrupt context] This moves the implementation into using a semaphore [with size '1'] instead. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 9 +++++---- drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c | 20 ++++++++++++++------ 3 files changed, 20 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index a3b0f7a0c61e..1f82a04ce01a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1774,7 +1774,7 @@ struct bnx2x { int stats_state; /* used for synchronization of concurrent threads statistics handling */ - struct mutex stats_lock; + struct semaphore stats_lock; /* used by dmae command loader */ struct dmae_command stats_dmae; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index fd52ce95127e..33501bcddc48 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12054,7 +12054,7 @@ static int bnx2x_init_bp(struct bnx2x *bp) mutex_init(&bp->port.phy_mutex); mutex_init(&bp->fw_mb_mutex); mutex_init(&bp->drv_info_mutex); - mutex_init(&bp->stats_lock); + sema_init(&bp->stats_lock, 1); bp->drv_info_mng_owner = false; INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task); @@ -13690,9 +13690,10 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp) cancel_delayed_work_sync(&bp->sp_task); cancel_delayed_work_sync(&bp->period_task); - mutex_lock(&bp->stats_lock); - bp->stats_state = STATS_STATE_DISABLED; - mutex_unlock(&bp->stats_lock); + if (!down_timeout(&bp->stats_lock, HZ / 10)) { + bp->stats_state = STATS_STATE_DISABLED; + up(&bp->stats_lock); + } bnx2x_save_statistics(bp); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c index 266b055c2360..69d699f0730a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c @@ -1372,19 +1372,23 @@ void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event) * that context in case someone is in the middle of a transition. * For other events, wait a bit until lock is taken. */ - if (!mutex_trylock(&bp->stats_lock)) { + if (down_trylock(&bp->stats_lock)) { if (event == STATS_EVENT_UPDATE) return; DP(BNX2X_MSG_STATS, "Unlikely stats' lock contention [event %d]\n", event); - mutex_lock(&bp->stats_lock); + if (unlikely(down_timeout(&bp->stats_lock, HZ / 10))) { + BNX2X_ERR("Failed to take stats lock [event %d]\n", + event); + return; + } } bnx2x_stats_stm[state][event].action(bp); bp->stats_state = bnx2x_stats_stm[state][event].next_state; - mutex_unlock(&bp->stats_lock); + up(&bp->stats_lock); if ((event != STATS_EVENT_UPDATE) || netif_msg_timer(bp)) DP(BNX2X_MSG_STATS, "state %d -> event %d -> state %d\n", @@ -1970,7 +1974,11 @@ int bnx2x_stats_safe_exec(struct bnx2x *bp, /* Wait for statistics to end [while blocking further requests], * then run supplied function 'safely'. */ - mutex_lock(&bp->stats_lock); + rc = down_timeout(&bp->stats_lock, HZ / 10); + if (unlikely(rc)) { + BNX2X_ERR("Failed to take statistics lock for safe execution\n"); + goto out_no_lock; + } bnx2x_stats_comp(bp); while (bp->stats_pending && cnt--) @@ -1988,7 +1996,7 @@ out: /* No need to restart statistics - if they're enabled, the timer * will restart the statistics. */ - mutex_unlock(&bp->stats_lock); - + up(&bp->stats_lock); +out_no_lock: return rc; } -- cgit v1.2.3