From 14f89946b6b383e617657a1e81fe6bf520ce86d5 Mon Sep 17 00:00:00 2001 From: "Russell King (Oracle)" Date: Thu, 30 May 2024 20:52:26 +0100 Subject: wifi: wlcore: fix wlcore AP mode Using wl183x devices in AP mode with various firmwares is not stable. The driver currently adds a station to firmware with basic rates when it is first known to the stack using the CMD_ADD_PEER command. Once the station has finished authorising, another CMD_ADD_PEER command is issued to update the firmware with the rates the station can use. However, after a random amount of time, the firmware ignores the power management nullfunc frames from the station, and tries to send packets while the station is asleep, resulting in lots of retries dropping down in rate due to no response. This restricts the available bandwidth. With this happening with several stations, the user visible effect is the latency of interactive connections increases significantly, packets get dropped, and in general the WiFi connections become unreliable and unstable. Eventually, the firmware transmit queue appears to get stuck - with packets and blocks allocated that never clear. TI have a couple of patches that address this, but they touch the mac80211 core to disable NL80211_FEATURE_FULL_AP_CLIENT_STATE for *all* wireless drivers, which has the effect of not adding the station to the stack until later when the rates are known. This is a sledge hammer approach to solving the problem. The solution implemented here has the same effect, but without impacting all drivers. We delay adding the station to firmware until it has been authorised in the driver, and correspondingly remove the station when unwinding from authorised state. Adding the station to firmware allocates a hlid, which will now happen later than the driver expects. Therefore, we need to track when this happens so that we transmit using the correct hlid. This patch is an equivalent fix to these two patches in TI's wilink8-wlan repository: https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0004-mac80211-patch.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7 https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0005-wlcore-patch.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7 Reported-by: Russell King (Oracle) Co-developed-by: Johannes Berg Tested-by: Russell King (Oracle) Signed-off-by: Johannes Berg Signed-off-by: Russell King (Oracle) Signed-off-by: Kalle Valo Link: https://msgid.link/E1sClp4-00Evu7-8v@rmk-PC.armlinux.org.uk --- drivers/net/wireless/ti/wlcore/cmd.c | 7 ------- drivers/net/wireless/ti/wlcore/main.c | 17 ++++++++--------- drivers/net/wireless/ti/wlcore/tx.c | 7 ++----- drivers/net/wireless/ti/wlcore/wlcore_i.h | 6 ++++++ 4 files changed, 16 insertions(+), 21 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index a939fd89a7f5..92fc2d456c2c 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -1566,13 +1566,6 @@ int wl12xx_cmd_add_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif, cpu_to_le32(wl1271_tx_enabled_rates_get(wl, sta_rates, wlvif->band)); - if (!cmd->supported_rates) { - wl1271_debug(DEBUG_CMD, - "peer has no supported rates yet, configuring basic rates: 0x%x", - wlvif->basic_rate_set); - cmd->supported_rates = cpu_to_le32(wlvif->basic_rate_set); - } - wl1271_debug(DEBUG_CMD, "new peer rates=0x%x queues=0x%x", cmd->supported_rates, sta->uapsd_queues); diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index ef12169f8044..492cd7aef44f 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5139,19 +5139,23 @@ static int wl12xx_update_sta_state(struct wl1271 *wl, /* Add station (AP mode) */ if (is_ap && - old_state == IEEE80211_STA_NOTEXIST && - new_state == IEEE80211_STA_NONE) { + old_state == IEEE80211_STA_AUTH && + new_state == IEEE80211_STA_ASSOC) { ret = wl12xx_sta_add(wl, wlvif, sta); if (ret) return ret; + wl_sta->fw_added = true; + wlcore_update_inconn_sta(wl, wlvif, wl_sta, true); } /* Remove station (AP mode) */ if (is_ap && - old_state == IEEE80211_STA_NONE && - new_state == IEEE80211_STA_NOTEXIST) { + old_state == IEEE80211_STA_ASSOC && + new_state == IEEE80211_STA_AUTH) { + wl_sta->fw_added = false; + /* must not fail */ wl12xx_sta_remove(wl, wlvif, sta); @@ -5165,11 +5169,6 @@ static int wl12xx_update_sta_state(struct wl1271 *wl, if (ret < 0) return ret; - /* reconfigure rates */ - ret = wl12xx_cmd_add_peer(wl, wlvif, sta, wl_sta->hlid); - if (ret < 0) - return ret; - ret = wl1271_acx_set_ht_capabilities(wl, &sta->deflink.ht_cap, true, wl_sta->hlid); diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index 7bd3ce2f0804..464587d16ab2 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -140,11 +140,8 @@ EXPORT_SYMBOL(wl12xx_is_dummy_packet); static u8 wl12xx_tx_get_hlid_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct sk_buff *skb, struct ieee80211_sta *sta) { - if (sta) { - struct wl1271_station *wl_sta; - - wl_sta = (struct wl1271_station *)sta->drv_priv; - return wl_sta->hlid; + if (sta && wl1271_station(sta)->fw_added) { + return wl1271_station(sta)->hlid; } else { struct ieee80211_hdr *hdr; diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index eefae3f867b9..817a8a61cac6 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -324,6 +324,7 @@ struct wl12xx_rx_filter { struct wl1271_station { u8 hlid; + bool fw_added; bool in_connection; /* @@ -335,6 +336,11 @@ struct wl1271_station { u64 total_freed_pkts; }; +static inline struct wl1271_station *wl1271_station(struct ieee80211_sta *sta) +{ + return (struct wl1271_station *)sta->drv_priv; +} + struct wl12xx_vif { struct wl1271 *wl; struct list_head list; -- cgit v1.2.3 From ad53f5f54f351e967128edbc431f0f26427172cf Mon Sep 17 00:00:00 2001 From: Tristram Ha Date: Tue, 18 Jun 2024 17:16:42 -0700 Subject: net: dsa: microchip: fix initial port flush problem The very first flush in any port will flush all learned addresses in all ports. This can be observed by unplugging the cable from one port while additional ports are connected and dumping the fdb entries. This problem is caused by the initially wrong value programmed to the REG_SW_LUE_CTRL_1 register. Setting SW_FLUSH_STP_TABLE and SW_FLUSH_MSTP_TABLE bits does not have an immediate effect. It is when ksz9477_flush_dyn_mac_table() is called then the SW_FLUSH_STP_TABLE bit takes effect and flushes all learned entries. After that call both bits are reset and so the next port flush will not cause such problem again. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Tristram Ha Link: https://patch.msgid.link/1718756202-2731-1-git-send-email-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/microchip/ksz9477.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index f8ad7833f5d9..2231128eef8b 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -355,10 +355,8 @@ int ksz9477_reset_switch(struct ksz_device *dev) SPI_AUTO_EDGE_DETECTION, 0); /* default configuration */ - ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8); - data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING | - SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE; - ksz_write8(dev, REG_SW_LUE_CTRL_1, data8); + ksz_write8(dev, REG_SW_LUE_CTRL_1, + SW_AGING_ENABLE | SW_LINK_AUTO_AGING | SW_SRC_ADDR_FILTER); /* disable interrupts */ ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK); -- cgit v1.2.3 From 0d34d8163fd87978a6abd792e2d8ad849f4c3d57 Mon Sep 17 00:00:00 2001 From: Chen Ni Date: Tue, 21 May 2024 12:10:20 +0800 Subject: can: kvaser_usb: fix return value for hif_usb_send_regout As the potential failure of usb_submit_urb(), it should be better to return the err variable to catch the error. Signed-off-by: Chen Ni Link: https://lore.kernel.org/all/20240521041020.1519416-1-nichen@iscas.ac.cn Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c index 8faf8a462c05..7292c81fc0cd 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c @@ -294,7 +294,7 @@ int kvaser_usb_send_cmd_async(struct kvaser_usb_net_priv *priv, void *cmd, } usb_free_urb(urb); - return 0; + return err; } int kvaser_usb_can_rx_over_error(struct net_device *netdev) -- cgit v1.2.3 From d8fb63e46c884c898a38f061c2330f7729e75510 Mon Sep 17 00:00:00 2001 From: Vitor Soares Date: Fri, 17 May 2024 14:43:55 +0100 Subject: can: mcp251xfd: fix infinite loop when xmit fails When the mcp251xfd_start_xmit() function fails, the driver stops processing messages, and the interrupt routine does not return, running indefinitely even after killing the running application. Error messages: [ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16 [ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3). ... and repeat forever. The issue can be triggered when multiple devices share the same SPI interface. And there is concurrent access to the bus. The problem occurs because tx_ring->head increments even if mcp251xfd_start_xmit() fails. Consequently, the driver skips one TX package while still expecting a response in mcp251xfd_handle_tefif_one(). Resolve the issue by starting a workqueue to write the tx obj synchronously if err = -EBUSY. In case of another error, decrement tx_ring->head, remove skb from the echo stack, and drop the message. Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Cc: stable@vger.kernel.org Signed-off-by: Vitor Soares Link: https://lore.kernel.org/all/20240517134355.770777-1-ivitro@gmail.com [mkl: use more imperative wording in patch description] Signed-off-by: Marc Kleine-Budde --- drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 14 ++++++- drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c | 55 ++++++++++++++++++++++---- drivers/net/can/spi/mcp251xfd/mcp251xfd.h | 5 +++ 3 files changed, 65 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c index 1d9057dc44f2..bf1589aef1fc 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c @@ -1618,11 +1618,20 @@ static int mcp251xfd_open(struct net_device *ndev) clear_bit(MCP251XFD_FLAGS_DOWN, priv->flags); can_rx_offload_enable(&priv->offload); + priv->wq = alloc_ordered_workqueue("%s-mcp251xfd_wq", + WQ_FREEZABLE | WQ_MEM_RECLAIM, + dev_name(&spi->dev)); + if (!priv->wq) { + err = -ENOMEM; + goto out_can_rx_offload_disable; + } + INIT_WORK(&priv->tx_work, mcp251xfd_tx_obj_write_sync); + err = request_threaded_irq(spi->irq, NULL, mcp251xfd_irq, IRQF_SHARED | IRQF_ONESHOT, dev_name(&spi->dev), priv); if (err) - goto out_can_rx_offload_disable; + goto out_destroy_workqueue; err = mcp251xfd_chip_interrupts_enable(priv); if (err) @@ -1634,6 +1643,8 @@ static int mcp251xfd_open(struct net_device *ndev) out_free_irq: free_irq(spi->irq, priv); + out_destroy_workqueue: + destroy_workqueue(priv->wq); out_can_rx_offload_disable: can_rx_offload_disable(&priv->offload); set_bit(MCP251XFD_FLAGS_DOWN, priv->flags); @@ -1661,6 +1672,7 @@ static int mcp251xfd_stop(struct net_device *ndev) hrtimer_cancel(&priv->tx_irq_timer); mcp251xfd_chip_interrupts_disable(priv); free_irq(ndev->irq, priv); + destroy_workqueue(priv->wq); can_rx_offload_disable(&priv->offload); mcp251xfd_timestamp_stop(priv); mcp251xfd_chip_stop(priv, CAN_STATE_STOPPED); diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c index 160528d3cc26..b1de8052a45c 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c @@ -131,6 +131,39 @@ mcp251xfd_tx_obj_from_skb(const struct mcp251xfd_priv *priv, tx_obj->xfer[0].len = len; } +static void mcp251xfd_tx_failure_drop(const struct mcp251xfd_priv *priv, + struct mcp251xfd_tx_ring *tx_ring, + int err) +{ + struct net_device *ndev = priv->ndev; + struct net_device_stats *stats = &ndev->stats; + unsigned int frame_len = 0; + u8 tx_head; + + tx_ring->head--; + stats->tx_dropped++; + tx_head = mcp251xfd_get_tx_head(tx_ring); + can_free_echo_skb(ndev, tx_head, &frame_len); + netdev_completed_queue(ndev, 1, frame_len); + netif_wake_queue(ndev); + + if (net_ratelimit()) + netdev_err(priv->ndev, "ERROR in %s: %d\n", __func__, err); +} + +void mcp251xfd_tx_obj_write_sync(struct work_struct *work) +{ + struct mcp251xfd_priv *priv = container_of(work, struct mcp251xfd_priv, + tx_work); + struct mcp251xfd_tx_obj *tx_obj = priv->tx_work_obj; + struct mcp251xfd_tx_ring *tx_ring = priv->tx; + int err; + + err = spi_sync(priv->spi, &tx_obj->msg); + if (err) + mcp251xfd_tx_failure_drop(priv, tx_ring, err); +} + static int mcp251xfd_tx_obj_write(const struct mcp251xfd_priv *priv, struct mcp251xfd_tx_obj *tx_obj) { @@ -162,6 +195,11 @@ static bool mcp251xfd_tx_busy(const struct mcp251xfd_priv *priv, return false; } +static bool mcp251xfd_work_busy(struct work_struct *work) +{ + return work_busy(work); +} + netdev_tx_t mcp251xfd_start_xmit(struct sk_buff *skb, struct net_device *ndev) { @@ -175,7 +213,8 @@ netdev_tx_t mcp251xfd_start_xmit(struct sk_buff *skb, if (can_dev_dropped_skb(ndev, skb)) return NETDEV_TX_OK; - if (mcp251xfd_tx_busy(priv, tx_ring)) + if (mcp251xfd_tx_busy(priv, tx_ring) || + mcp251xfd_work_busy(&priv->tx_work)) return NETDEV_TX_BUSY; tx_obj = mcp251xfd_get_tx_obj_next(tx_ring); @@ -193,13 +232,13 @@ netdev_tx_t mcp251xfd_start_xmit(struct sk_buff *skb, netdev_sent_queue(priv->ndev, frame_len); err = mcp251xfd_tx_obj_write(priv, tx_obj); - if (err) - goto out_err; - - return NETDEV_TX_OK; - - out_err: - netdev_err(priv->ndev, "ERROR in %s: %d\n", __func__, err); + if (err == -EBUSY) { + netif_stop_queue(ndev); + priv->tx_work_obj = tx_obj; + queue_work(priv->wq, &priv->tx_work); + } else if (err) { + mcp251xfd_tx_failure_drop(priv, tx_ring, err); + } return NETDEV_TX_OK; } diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h index 24510b3b8020..b35bfebd23f2 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h @@ -633,6 +633,10 @@ struct mcp251xfd_priv { struct mcp251xfd_rx_ring *rx[MCP251XFD_FIFO_RX_NUM]; struct mcp251xfd_tx_ring tx[MCP251XFD_FIFO_TX_NUM]; + struct workqueue_struct *wq; + struct work_struct tx_work; + struct mcp251xfd_tx_obj *tx_work_obj; + DECLARE_BITMAP(flags, __MCP251XFD_FLAGS_SIZE__); u8 rx_ring_num; @@ -952,6 +956,7 @@ void mcp251xfd_skb_set_timestamp(const struct mcp251xfd_priv *priv, void mcp251xfd_timestamp_init(struct mcp251xfd_priv *priv); void mcp251xfd_timestamp_stop(struct mcp251xfd_priv *priv); +void mcp251xfd_tx_obj_write_sync(struct work_struct *work); netdev_tx_t mcp251xfd_start_xmit(struct sk_buff *skb, struct net_device *ndev); -- cgit v1.2.3 From 00418d5530ca1f42d8721fe0a3e73d1ae477c223 Mon Sep 17 00:00:00 2001 From: Aryan Srivastava Date: Thu, 20 Jun 2024 16:12:02 +1200 Subject: net: mvpp2: fill-in dev_port attribute Fill this in so user-space can identify multiple ports on the same CP unit. Signed-off-by: Aryan Srivastava Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index 671368d2c77e..9adf4301c9b1 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -6907,6 +6907,7 @@ static int mvpp2_port_probe(struct platform_device *pdev, /* 9704 == 9728 - 20 and rounding to 8 */ dev->max_mtu = MVPP2_BM_JUMBO_PKT_SIZE; device_set_node(&dev->dev, port_fwnode); + dev->dev_port = port->id; port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops; port->pcs_gmac.neg_mode = true; -- cgit v1.2.3 From a95b031c6796bf9972da2d4b4b524a57734f3a0a Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Thu, 20 Jun 2024 16:56:26 +0800 Subject: bonding: fix incorrect software timestamping report The __ethtool_get_ts_info function returns directly if the device has a get_ts_info() method. For bonding with an active slave, this works correctly as we simply return the real device's timestamping information. However, when there is no active slave, we only check the slave's TX software timestamp information. We still need to set the phc index and RX timestamp information manually. Otherwise, the result will be look like: Time stamping parameters for bond0: Capabilities: software-transmit PTP Hardware Clock: 0 Hardware Transmit Timestamp Modes: none Hardware Receive Filter Modes: none This issue does not affect VLAN or MACVLAN devices, as they only have one downlink and can directly use the downlink's timestamping information. Fixes: b8768dc40777 ("net: ethtool: Refactor identical get_ts_info implementations.") Reported-by: Liang Li Closes: https://issues.redhat.com/browse/RHEL-42409 Signed-off-by: Hangbin Liu Acked-by: Kory Maincent Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 3c3fcce4acd4..d19aabf5d4fb 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -5773,6 +5773,9 @@ static int bond_ethtool_get_ts_info(struct net_device *bond_dev, if (real_dev) { ret = ethtool_get_ts_info_by_layer(real_dev, info); } else { + info->phc_index = -1; + info->so_timestamping = SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE; /* Check if all slaves support software tx timestamping */ rcu_read_lock(); bond_for_each_slave_rcu(bond, slave, iter) { -- cgit v1.2.3 From 7eadf50095bc35c0e17e66cab617a934888edc20 Mon Sep 17 00:00:00 2001 From: Kory Maincent Date: Thu, 20 Jun 2024 11:57:50 +0200 Subject: net: pse-pd: Kconfig: Fix missing firmware loader config select Selecting FW_UPLOAD is not sufficient as it allows the firmware loader API to be built as a module alongside the pd692x0 driver built as builtin. Add select FW_LOADER to fix this issue. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202406200632.hSChnX0g-lkp@intel.com/ Fixes: 9a9938451890 ("net: pse-pd: Add PD692x0 PSE controller driver") Signed-off-by: Kory Maincent Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/pse-pd/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/pse-pd/Kconfig b/drivers/net/pse-pd/Kconfig index 577ea904b3d9..7fab916a7f46 100644 --- a/drivers/net/pse-pd/Kconfig +++ b/drivers/net/pse-pd/Kconfig @@ -23,6 +23,7 @@ config PSE_REGULATOR config PSE_PD692X0 tristate "PD692X0 PSE controller" depends on I2C + select FW_LOADER select FW_UPLOAD help This module provides support for PD692x0 regulator based Ethernet -- cgit v1.2.3 From e3f02f32a05009a688a87f5799e049ed6b55bab5 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Thu, 20 Jun 2024 10:58:08 +0000 Subject: ionic: fix kernel panic due to multi-buffer handling Currently, the ionic_run_xdp() doesn't handle multi-buffer packets properly for XDP_TX and XDP_REDIRECT. When a jumbo frame is received, the ionic_run_xdp() first makes xdp frame with all necessary pages in the rx descriptor. And if the action is either XDP_TX or XDP_REDIRECT, it should unmap dma-mapping and reset page pointer to NULL for all pages, not only the first page. But it doesn't for SG pages. So, SG pages unexpectedly will be reused. It eventually causes kernel panic. Oops: general protection fault, probably for non-canonical address 0x504f4e4dbebc64ff: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.10.0-rc3+ #25 RIP: 0010:xdp_return_frame+0x42/0x90 Code: 01 75 12 5b 4c 89 e6 5d 31 c9 41 5c 31 d2 41 5d e9 73 fd ff ff 44 8b 6b 20 0f b7 43 0a 49 81 ed 68 01 00 00 49 29 c5 49 01 fd <41> 80 7d0 RSP: 0018:ffff99d00122ce08 EFLAGS: 00010202 RAX: 0000000000005453 RBX: ffff8d325f904000 RCX: 0000000000000001 RDX: 00000000670e1000 RSI: 000000011f90d000 RDI: 504f4e4d4c4b4a49 RBP: ffff99d003907740 R08: 0000000000000000 R09: 0000000000000000 R10: 000000011f90d000 R11: 0000000000000000 R12: ffff8d325f904010 R13: 504f4e4dbebc64fd R14: ffff8d3242b070c8 R15: ffff99d0039077c0 FS: 0000000000000000(0000) GS:ffff8d399f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f41f6c85e38 CR3: 000000037ac30000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: ? die_addr+0x33/0x90 ? exc_general_protection+0x251/0x2f0 ? asm_exc_general_protection+0x22/0x30 ? xdp_return_frame+0x42/0x90 ionic_tx_clean+0x211/0x280 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] ionic_tx_cq_service+0xd3/0x210 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] ionic_txrx_napi+0x41/0x1b0 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] __napi_poll.constprop.0+0x29/0x1b0 net_rx_action+0x2c4/0x350 handle_softirqs+0xf4/0x320 irq_exit_rcu+0x78/0xa0 common_interrupt+0x77/0x90 Fixes: 5377805dc1c0 ("ionic: implement xdp frags support") Signed-off-by: Taehee Yoo Reviewed-by: Shannon Nelson Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/ionic/ionic_txrx.c | 27 ++++++++++++++++-------- 1 file changed, 18 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c index 2427610f4306..aed7d9cbce03 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c @@ -480,6 +480,20 @@ int ionic_xdp_xmit(struct net_device *netdev, int n, return nxmit; } +static void ionic_xdp_rx_put_bufs(struct ionic_queue *q, + struct ionic_buf_info *buf_info, + int nbufs) +{ + int i; + + for (i = 0; i < nbufs; i++) { + dma_unmap_page(q->dev, buf_info->dma_addr, + IONIC_PAGE_SIZE, DMA_FROM_DEVICE); + buf_info->page = NULL; + buf_info++; + } +} + static bool ionic_run_xdp(struct ionic_rx_stats *stats, struct net_device *netdev, struct bpf_prog *xdp_prog, @@ -493,6 +507,7 @@ static bool ionic_run_xdp(struct ionic_rx_stats *stats, struct netdev_queue *nq; struct xdp_frame *xdpf; int remain_len; + int nbufs = 1; int frag_len; int err = 0; @@ -542,6 +557,7 @@ static bool ionic_run_xdp(struct ionic_rx_stats *stats, if (page_is_pfmemalloc(bi->page)) xdp_buff_set_frag_pfmemalloc(&xdp_buf); } while (remain_len > 0); + nbufs += sinfo->nr_frags; } xdp_action = bpf_prog_run_xdp(xdp_prog, &xdp_buf); @@ -574,9 +590,6 @@ static bool ionic_run_xdp(struct ionic_rx_stats *stats, goto out_xdp_abort; } - dma_unmap_page(rxq->dev, buf_info->dma_addr, - IONIC_PAGE_SIZE, DMA_FROM_DEVICE); - err = ionic_xdp_post_frame(txq, xdpf, XDP_TX, buf_info->page, buf_info->page_offset, @@ -586,23 +599,19 @@ static bool ionic_run_xdp(struct ionic_rx_stats *stats, netdev_dbg(netdev, "tx ionic_xdp_post_frame err %d\n", err); goto out_xdp_abort; } - buf_info->page = NULL; + ionic_xdp_rx_put_bufs(rxq, buf_info, nbufs); stats->xdp_tx++; /* the Tx completion will free the buffers */ break; case XDP_REDIRECT: - /* unmap the pages before handing them to a different device */ - dma_unmap_page(rxq->dev, buf_info->dma_addr, - IONIC_PAGE_SIZE, DMA_FROM_DEVICE); - err = xdp_do_redirect(netdev, &xdp_buf, xdp_prog); if (err) { netdev_dbg(netdev, "xdp_do_redirect err %d\n", err); goto out_xdp_abort; } - buf_info->page = NULL; + ionic_xdp_rx_put_bufs(rxq, buf_info, nbufs); rxq->xdp_flush = true; stats->xdp_redirect++; break; -- cgit v1.2.3 From 0602697d6f4d72b0bc5edbc76afabf6aaa029a69 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Fri, 21 Jun 2024 09:19:13 +0200 Subject: mlxsw: pci: Fix driver initialization with Spectrum-4 Cited commit added support for a new reset flow ("all reset") which is deeper than the existing reset flow ("software reset") and allows the device's PCI firmware to be upgraded. In the new flow the driver first tells the firmware that "all reset" is required by issuing a new reset command (i.e., MRSR.command=6) and then triggers the reset by having the PCI core issue a secondary bus reset (SBR). However, due to a race condition in the device's firmware the device is not always able to recover from this reset, resulting in initialization failures [1]. New firmware versions include a fix for the bug and advertise it using a new capability bit in the Management Capabilities Mask (MCAM) register. Avoid initialization failures by reading the new capability bit and triggering the new reset flow only if the bit is set. If the bit is not set, trigger a normal PCI hot reset by skipping the call to the Management Reset and Shutdown Register (MRSR). Normal PCI hot reset is weaker than "all reset", but it results in a fully operational driver and allows users to flash a new firmware, if they want to. [1] mlxsw_spectrum4 0000:01:00.0: not ready 1023ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 2047ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 4095ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 8191ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 16383ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 32767ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 65535ms after bus reset; giving up mlxsw_spectrum4 0000:01:00.0: PCI function reset failed with -25 mlxsw_spectrum4 0000:01:00.0: cannot register bus device mlxsw_spectrum4: probe of 0000:01:00.0 failed with error -25 Fixes: f257c73e5356 ("mlxsw: pci: Add support for new reset flow") Reported-by: Maksym Yaremchuk Signed-off-by: Ido Schimmel Tested-by: Maksym Yaremchuk Reviewed-by: Simon Horman Signed-off-by: Petr Machata Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/pci.c | 18 +++++++++++++++--- drivers/net/ethernet/mellanox/mlxsw/reg.h | 2 ++ 2 files changed, 17 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c index bf66d996e32e..c0ced4d315f3 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/pci.c +++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c @@ -1594,18 +1594,25 @@ static int mlxsw_pci_sys_ready_wait(struct mlxsw_pci *mlxsw_pci, return -EBUSY; } -static int mlxsw_pci_reset_at_pci_disable(struct mlxsw_pci *mlxsw_pci) +static int mlxsw_pci_reset_at_pci_disable(struct mlxsw_pci *mlxsw_pci, + bool pci_reset_sbr_supported) { struct pci_dev *pdev = mlxsw_pci->pdev; char mrsr_pl[MLXSW_REG_MRSR_LEN]; int err; + if (!pci_reset_sbr_supported) { + pci_dbg(pdev, "Performing PCI hot reset instead of \"all reset\"\n"); + goto sbr; + } + mlxsw_reg_mrsr_pack(mrsr_pl, MLXSW_REG_MRSR_COMMAND_RESET_AT_PCI_DISABLE); err = mlxsw_reg_write(mlxsw_pci->core, MLXSW_REG(mrsr), mrsr_pl); if (err) return err; +sbr: device_lock_assert(&pdev->dev); pci_cfg_access_lock(pdev); @@ -1633,6 +1640,7 @@ static int mlxsw_pci_reset(struct mlxsw_pci *mlxsw_pci, const struct pci_device_id *id) { struct pci_dev *pdev = mlxsw_pci->pdev; + bool pci_reset_sbr_supported = false; char mcam_pl[MLXSW_REG_MCAM_LEN]; bool pci_reset_supported = false; u32 sys_status; @@ -1652,13 +1660,17 @@ mlxsw_pci_reset(struct mlxsw_pci *mlxsw_pci, const struct pci_device_id *id) mlxsw_reg_mcam_pack(mcam_pl, MLXSW_REG_MCAM_FEATURE_GROUP_ENHANCED_FEATURES); err = mlxsw_reg_query(mlxsw_pci->core, MLXSW_REG(mcam), mcam_pl); - if (!err) + if (!err) { mlxsw_reg_mcam_unpack(mcam_pl, MLXSW_REG_MCAM_PCI_RESET, &pci_reset_supported); + mlxsw_reg_mcam_unpack(mcam_pl, MLXSW_REG_MCAM_PCI_RESET_SBR, + &pci_reset_sbr_supported); + } if (pci_reset_supported) { pci_dbg(pdev, "Starting PCI reset flow\n"); - err = mlxsw_pci_reset_at_pci_disable(mlxsw_pci); + err = mlxsw_pci_reset_at_pci_disable(mlxsw_pci, + pci_reset_sbr_supported); } else { pci_dbg(pdev, "Starting software reset flow\n"); err = mlxsw_pci_reset_sw(mlxsw_pci); diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 8adf86a6f5cc..3bb89045eaf5 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -10671,6 +10671,8 @@ enum mlxsw_reg_mcam_mng_feature_cap_mask_bits { MLXSW_REG_MCAM_MCIA_128B = 34, /* If set, MRSR.command=6 is supported. */ MLXSW_REG_MCAM_PCI_RESET = 48, + /* If set, MRSR.command=6 is supported with Secondary Bus Reset. */ + MLXSW_REG_MCAM_PCI_RESET_SBR = 67, }; #define MLXSW_REG_BYTES_PER_DWORD 0x4 -- cgit v1.2.3 From c28947de2bed40217cf256c5d0d16880054fcf13 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Fri, 21 Jun 2024 09:19:14 +0200 Subject: mlxsw: spectrum_buffers: Fix memory corruptions on Spectrum-4 systems The following two shared buffer operations make use of the Shared Buffer Status Register (SBSR): # devlink sb occupancy snapshot pci/0000:01:00.0 # devlink sb occupancy clearmax pci/0000:01:00.0 The register has two masks of 256 bits to denote on which ingress / egress ports the register should operate on. Spectrum-4 has more than 256 ports, so the register was extended by cited commit with a new 'port_page' field. However, when filling the register's payload, the driver specifies the ports as absolute numbers and not relative to the first port of the port page, resulting in memory corruptions [1]. Fix by specifying the ports relative to the first port of the port page. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0 Read of size 1 at addr ffff8881068cb00f by task devlink/1566 [...] Call Trace: dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0 mlxsw_devlink_sb_occ_snapshot+0x75/0xb0 devlink_nl_sb_occ_snapshot_doit+0x1f9/0x2a0 genl_family_rcv_msg_doit+0x20c/0x300 genl_rcv_msg+0x567/0x800 netlink_rcv_skb+0x170/0x450 genl_rcv+0x2d/0x40 netlink_unicast+0x547/0x830 netlink_sendmsg+0x8d4/0xdb0 __sys_sendto+0x49b/0x510 __x64_sys_sendto+0xe5/0x1c0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] Allocated by task 1: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 copy_verifier_state+0xbc2/0xfb0 do_check_common+0x2c51/0xc7e0 bpf_check+0x5107/0x9960 bpf_prog_load+0xf0e/0x2690 __sys_bpf+0x1a61/0x49d0 __x64_sys_bpf+0x7d/0xc0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x109/0x170 __kasan_slab_free+0x14/0x30 kfree+0xca/0x2b0 free_verifier_state+0xce/0x270 do_check_common+0x4828/0xc7e0 bpf_check+0x5107/0x9960 bpf_prog_load+0xf0e/0x2690 __sys_bpf+0x1a61/0x49d0 __x64_sys_bpf+0x7d/0xc0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: f8538aec88b4 ("mlxsw: Add support for more than 256 ports in SBSR register") Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Reviewed-by: Simon Horman Signed-off-by: Petr Machata Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlxsw/spectrum_buffers.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c index c9f1c79f3f9d..ba090262e27e 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c @@ -1607,8 +1607,8 @@ static void mlxsw_sp_sb_sr_occ_query_cb(struct mlxsw_core *mlxsw_core, int mlxsw_sp_sb_occ_snapshot(struct mlxsw_core *mlxsw_core, unsigned int sb_index) { + u16 local_port, local_port_1, first_local_port, last_local_port; struct mlxsw_sp *mlxsw_sp = mlxsw_core_driver_priv(mlxsw_core); - u16 local_port, local_port_1, last_local_port; struct mlxsw_sp_sb_sr_occ_query_cb_ctx cb_ctx; u8 masked_count, current_page = 0; unsigned long cb_priv = 0; @@ -1628,6 +1628,7 @@ next_batch: masked_count = 0; mlxsw_reg_sbsr_pack(sbsr_pl, false); mlxsw_reg_sbsr_port_page_set(sbsr_pl, current_page); + first_local_port = current_page * MLXSW_REG_SBSR_NUM_PORTS_IN_PAGE; last_local_port = current_page * MLXSW_REG_SBSR_NUM_PORTS_IN_PAGE + MLXSW_REG_SBSR_NUM_PORTS_IN_PAGE - 1; @@ -1645,9 +1646,12 @@ next_batch: if (local_port != MLXSW_PORT_CPU_PORT) { /* Ingress quotas are not supported for the CPU port */ mlxsw_reg_sbsr_ingress_port_mask_set(sbsr_pl, - local_port, 1); + local_port - first_local_port, + 1); } - mlxsw_reg_sbsr_egress_port_mask_set(sbsr_pl, local_port, 1); + mlxsw_reg_sbsr_egress_port_mask_set(sbsr_pl, + local_port - first_local_port, + 1); for (i = 0; i < mlxsw_sp->sb_vals->pool_count; i++) { err = mlxsw_sp_sb_pm_occ_query(mlxsw_sp, local_port, i, &bulk_list); @@ -1684,7 +1688,7 @@ int mlxsw_sp_sb_occ_max_clear(struct mlxsw_core *mlxsw_core, unsigned int sb_index) { struct mlxsw_sp *mlxsw_sp = mlxsw_core_driver_priv(mlxsw_core); - u16 local_port, last_local_port; + u16 local_port, first_local_port, last_local_port; LIST_HEAD(bulk_list); unsigned int masked_count; u8 current_page = 0; @@ -1702,6 +1706,7 @@ next_batch: masked_count = 0; mlxsw_reg_sbsr_pack(sbsr_pl, true); mlxsw_reg_sbsr_port_page_set(sbsr_pl, current_page); + first_local_port = current_page * MLXSW_REG_SBSR_NUM_PORTS_IN_PAGE; last_local_port = current_page * MLXSW_REG_SBSR_NUM_PORTS_IN_PAGE + MLXSW_REG_SBSR_NUM_PORTS_IN_PAGE - 1; @@ -1719,9 +1724,12 @@ next_batch: if (local_port != MLXSW_PORT_CPU_PORT) { /* Ingress quotas are not supported for the CPU port */ mlxsw_reg_sbsr_ingress_port_mask_set(sbsr_pl, - local_port, 1); + local_port - first_local_port, + 1); } - mlxsw_reg_sbsr_egress_port_mask_set(sbsr_pl, local_port, 1); + mlxsw_reg_sbsr_egress_port_mask_set(sbsr_pl, + local_port - first_local_port, + 1); for (i = 0; i < mlxsw_sp->sb_vals->pool_count; i++) { err = mlxsw_sp_sb_pm_occ_clear(mlxsw_sp, local_port, i, &bulk_list); -- cgit v1.2.3 From 31392048f55f98cb01ca709d32d06d926ab9760a Mon Sep 17 00:00:00 2001 From: Guillaume Nault Date: Wed, 19 Jun 2024 15:34:57 +0200 Subject: vxlan: Pull inner IP header in vxlan_xmit_one(). Ensure the inner IP header is part of the skb's linear data before setting old_iph. Otherwise, on a non-linear skb, old_iph could point outside of the packet data. Unlike classical VXLAN, which always encapsulates Ethernet packets, VXLAN-GPE can transport IP packets directly. In that case, we need to look at skb->protocol to figure out if an Ethernet header is present. Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Signed-off-by: Guillaume Nault Link: https://patch.msgid.link/2aa75f6fa62ac9dbe4f16ad5ba75dd04a51d4b99.1718804000.git.gnault@redhat.com Signed-off-by: Jakub Kicinski --- drivers/net/vxlan/vxlan_core.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/vxlan/vxlan_core.c b/drivers/net/vxlan/vxlan_core.c index 567cb3faab70..ba59e92ab941 100644 --- a/drivers/net/vxlan/vxlan_core.c +++ b/drivers/net/vxlan/vxlan_core.c @@ -2339,7 +2339,7 @@ void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, struct ip_tunnel_key *pkey; struct ip_tunnel_key key; struct vxlan_dev *vxlan = netdev_priv(dev); - const struct iphdr *old_iph = ip_hdr(skb); + const struct iphdr *old_iph; struct vxlan_metadata _md; struct vxlan_metadata *md = &_md; unsigned int pkt_len = skb->len; @@ -2353,8 +2353,15 @@ void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, bool use_cache; bool udp_sum = false; bool xnet = !net_eq(vxlan->net, dev_net(vxlan->dev)); + bool no_eth_encap; __be32 vni = 0; + no_eth_encap = flags & VXLAN_F_GPE && skb->protocol != htons(ETH_P_TEB); + if (!skb_vlan_inet_prepare(skb, no_eth_encap)) + goto drop; + + old_iph = ip_hdr(skb); + info = skb_tunnel_info(skb); use_cache = ip_tunnel_dst_cache_usable(skb, info); -- cgit v1.2.3 From 49bbeb5719c2f56907d3a9623b47c6c15c2c431d Mon Sep 17 00:00:00 2001 From: Nick Child Date: Thu, 20 Jun 2024 10:23:12 -0500 Subject: ibmvnic: Free any outstanding tx skbs during scrq reset There are 2 types of outstanding tx skb's: Type 1: Packets that are sitting in the drivers ind_buff that are waiting to be batch sent to the NIC. During a device reset, these are freed with a call to ibmvnic_tx_scrq_clean_buffer() Type 2: Packets that have been sent to the NIC and are awaiting a TX completion IRQ. These are free'd during a reset with a call to clean_tx_pools() During any reset which requires us to free the tx irq, ensure that the Type 2 skb references are freed. Since the irq is released, it is impossible for the NIC to inform of any completions. Furthermore, later in the reset process is a call to init_tx_pools() which marks every entry in the tx pool as free (ie not outstanding). So if the driver is to make a call to init_tx_pools(), it must first be sure that the tx pool is empty of skb references. This issue was discovered by observing the following in the logs during EEH testing: TX free map points to untracked skb (tso_pool 0 idx=4) TX free map points to untracked skb (tso_pool 0 idx=5) TX free map points to untracked skb (tso_pool 1 idx=36) Fixes: 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset") Signed-off-by: Nick Child Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 5e9a93bdb518..5490f0f9c112 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -4061,6 +4061,12 @@ static void release_sub_crqs(struct ibmvnic_adapter *adapter, bool do_h_free) adapter->num_active_tx_scrqs = 0; } + /* Clean any remaining outstanding SKBs + * we freed the irq so we won't be hearing + * from them + */ + clean_tx_pools(adapter); + if (adapter->rx_scrq) { for (i = 0; i < adapter->num_active_rx_scrqs; i++) { if (!adapter->rx_scrq[i]) -- cgit v1.2.3 From 54a4e5c16382e871c01dd82b47e930fdce30406b Mon Sep 17 00:00:00 2001 From: Enguerrand de Ribaucourt Date: Fri, 21 Jun 2024 16:43:20 +0200 Subject: net: phy: micrel: add Microchip KSZ 9477 to the device table PHY_ID_KSZ9477 was supported but not added to the device table passed to MODULE_DEVICE_TABLE. Fixes: fc3973a1fa09 ("phy: micrel: add Microchip KSZ 9477 Switch PHY support") Signed-off-by: Enguerrand de Ribaucourt Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 5aada7cf3da7..ebafedde0ab7 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -5607,6 +5607,7 @@ static struct mdio_device_id __maybe_unused micrel_tbl[] = { { PHY_ID_KSZ8081, MICREL_PHY_ID_MASK }, { PHY_ID_KSZ8873MLL, MICREL_PHY_ID_MASK }, { PHY_ID_KSZ886X, MICREL_PHY_ID_MASK }, + { PHY_ID_KSZ9477, MICREL_PHY_ID_MASK }, { PHY_ID_LAN8814, MICREL_PHY_ID_MASK }, { PHY_ID_LAN8804, MICREL_PHY_ID_MASK }, { PHY_ID_LAN8841, MICREL_PHY_ID_MASK }, -- cgit v1.2.3 From d963c95bc9840d070a788c35e41b715a648717f7 Mon Sep 17 00:00:00 2001 From: Enguerrand de Ribaucourt Date: Fri, 21 Jun 2024 16:43:21 +0200 Subject: net: dsa: microchip: use collision based back pressure mode Errata DS80000758 states that carrier sense back pressure mode can cause link down issues in 100BASE-TX half duplex mode. The datasheet also recommends to always use the collision based back pressure mode. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Enguerrand de Ribaucourt Reviewed-by: Woojung Huh Acked-by: Arun Ramadoss Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz9477.c | 4 ++++ drivers/net/dsa/microchip/ksz9477_reg.h | 1 + 2 files changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index 2231128eef8b..cbaca4140cda 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -1297,6 +1297,10 @@ int ksz9477_setup(struct dsa_switch *ds) /* Enable REG_SW_MTU__2 reg by setting SW_JUMBO_PACKET */ ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_JUMBO_PACKET, true); + /* Use collision based back pressure mode. */ + ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_BACK_PRESSURE, + SW_BACK_PRESSURE_COLLISION); + /* Now we can configure default MTU value */ ret = regmap_update_bits(ksz_regmap_16(dev), REG_SW_MTU__2, REG_SW_MTU_MASK, VLAN_ETH_FRAME_LEN + ETH_FCS_LEN); diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h index f3a205ee483f..fb124be8edd3 100644 --- a/drivers/net/dsa/microchip/ksz9477_reg.h +++ b/drivers/net/dsa/microchip/ksz9477_reg.h @@ -247,6 +247,7 @@ #define REG_SW_MAC_CTRL_1 0x0331 #define SW_BACK_PRESSURE BIT(5) +#define SW_BACK_PRESSURE_COLLISION 0 #define FAIR_FLOW_CTRL BIT(4) #define NO_EXC_COLLISION_DROP BIT(3) #define SW_JUMBO_PACKET BIT(2) -- cgit v1.2.3 From bf1bff11e497a01b0cc6cb2afcff734340ae95f8 Mon Sep 17 00:00:00 2001 From: Enguerrand de Ribaucourt Date: Fri, 21 Jun 2024 16:43:22 +0200 Subject: net: dsa: microchip: monitor potential faults in half-duplex mode The errata DS80000754 recommends monitoring potential faults in half-duplex mode for the KSZ9477 family. half-duplex is not very common so I just added a critical message when the fault conditions are detected. The switch can be expected to be unable to communicate anymore in these states and a software reset of the switch would be required which I did not implement. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Enguerrand de Ribaucourt Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz9477.c | 51 +++++++++++++++++++++++++++++++++ drivers/net/dsa/microchip/ksz9477.h | 2 ++ drivers/net/dsa/microchip/ksz9477_reg.h | 10 +++++-- drivers/net/dsa/microchip/ksz_common.c | 11 +++++++ drivers/net/dsa/microchip/ksz_common.h | 1 + 5 files changed, 73 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index cbaca4140cda..425e20daf1e9 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -427,6 +427,57 @@ void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze) mutex_unlock(&p->mib.cnt_mutex); } +int ksz9477_errata_monitor(struct ksz_device *dev, int port, + u64 tx_late_col) +{ + u32 pmavbc; + u8 status; + u16 pqm; + int ret; + + ret = ksz_pread8(dev, port, REG_PORT_STATUS_0, &status); + if (ret) + return ret; + if (!(FIELD_GET(PORT_INTF_SPEED_MASK, status) == PORT_INTF_SPEED_NONE) && + !(status & PORT_INTF_FULL_DUPLEX)) { + /* Errata DS80000754 recommends monitoring potential faults in + * half-duplex mode. The switch might not be able to communicate anymore + * in these states. + * If you see this message, please read the errata-sheet for more information: + * https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9477S-Errata-DS80000754.pdf + * To workaround this issue, half-duplex mode should be avoided. + * A software reset could be implemented to recover from this state. + */ + dev_warn_once(dev->dev, + "Half-duplex detected on port %d, transmission halt may occur\n", + port); + if (tx_late_col != 0) { + /* Transmission halt with late collisions */ + dev_crit_once(dev->dev, + "TX late collisions detected, transmission may be halted on port %d\n", + port); + } + ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &status); + if (ret) + return ret; + if (status & SW_VLAN_ENABLE) { + ret = ksz_pread16(dev, port, REG_PORT_QM_TX_CNT_0__4, &pqm); + if (ret) + return ret; + ret = ksz_read32(dev, REG_PMAVBC, &pmavbc); + if (ret) + return ret; + if ((FIELD_GET(PMAVBC_MASK, pmavbc) <= PMAVBC_MIN) || + (FIELD_GET(PORT_QM_TX_CNT_M, pqm) >= PORT_QM_TX_CNT_MAX)) { + /* Transmission halt with Half-Duplex and VLAN */ + dev_crit_once(dev->dev, + "resources out of limits, transmission may be halted\n"); + } + } + } + return ret; +} + void ksz9477_port_init_cnt(struct ksz_device *dev, int port) { struct ksz_port_mib *mib = &dev->ports[port].mib; diff --git a/drivers/net/dsa/microchip/ksz9477.h b/drivers/net/dsa/microchip/ksz9477.h index ce1e656b800b..239a281da10b 100644 --- a/drivers/net/dsa/microchip/ksz9477.h +++ b/drivers/net/dsa/microchip/ksz9477.h @@ -36,6 +36,8 @@ int ksz9477_port_mirror_add(struct ksz_device *dev, int port, bool ingress, struct netlink_ext_ack *extack); void ksz9477_port_mirror_del(struct ksz_device *dev, int port, struct dsa_mall_mirror_tc_entry *mirror); +int ksz9477_errata_monitor(struct ksz_device *dev, int port, + u64 tx_late_col); void ksz9477_get_caps(struct ksz_device *dev, int port, struct phylink_config *config); int ksz9477_fdb_dump(struct ksz_device *dev, int port, diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h index fb124be8edd3..d5354c600ea1 100644 --- a/drivers/net/dsa/microchip/ksz9477_reg.h +++ b/drivers/net/dsa/microchip/ksz9477_reg.h @@ -843,8 +843,8 @@ #define REG_PORT_STATUS_0 0x0030 -#define PORT_INTF_SPEED_M 0x3 -#define PORT_INTF_SPEED_S 3 +#define PORT_INTF_SPEED_MASK GENMASK(4, 3) +#define PORT_INTF_SPEED_NONE GENMASK(1, 0) #define PORT_INTF_FULL_DUPLEX BIT(2) #define PORT_TX_FLOW_CTRL BIT(1) #define PORT_RX_FLOW_CTRL BIT(0) @@ -1168,6 +1168,11 @@ #define PORT_RMII_CLK_SEL BIT(7) #define PORT_MII_SEL_EDGE BIT(5) +#define REG_PMAVBC 0x03AC + +#define PMAVBC_MASK GENMASK(26, 16) +#define PMAVBC_MIN 0x580 + /* 4 - MAC */ #define REG_PORT_MAC_CTRL_0 0x0400 @@ -1495,6 +1500,7 @@ #define PORT_QM_TX_CNT_USED_S 0 #define PORT_QM_TX_CNT_M (BIT(11) - 1) +#define PORT_QM_TX_CNT_MAX 0x200 #define REG_PORT_QM_TX_CNT_1__4 0x0A14 diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 2818e24e2a51..0433109b42e5 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -1382,6 +1382,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .tc_cbs_supported = true, .ops = &ksz9477_dev_ops, .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1416,6 +1417,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_ipms = 8, .ops = &ksz9477_dev_ops, .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1450,6 +1452,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_ipms = 8, .ops = &ksz9477_dev_ops, .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1540,6 +1543,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .tc_cbs_supported = true, .ops = &ksz9477_dev_ops, .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1820,6 +1824,7 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port) struct rtnl_link_stats64 *stats; struct ksz_stats_raw *raw; struct ksz_port_mib *mib; + int ret; mib = &dev->ports[port].mib; stats = &mib->stats64; @@ -1861,6 +1866,12 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port) pstats->rx_pause_frames = raw->rx_pause; spin_unlock(&mib->stats64_lock); + + if (dev->info->phy_errata_9477) { + ret = ksz9477_errata_monitor(dev, port, raw->tx_late_col); + if (ret) + dev_err(dev->dev, "Failed to monitor transmission halt\n"); + } } void ksz88xx_r_mib_stats64(struct ksz_device *dev, int port) diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index c784fd23a993..ee7db46e469d 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -66,6 +66,7 @@ struct ksz_chip_data { bool tc_cbs_supported; const struct ksz_dev_ops *ops; const struct phylink_mac_ops *phylink_mac_ops; + bool phy_errata_9477; bool ksz87xx_eee_link_erratum; const struct ksz_mib_names *mib_names; int mib_cnt; -- cgit v1.2.3 From f4b91c1d17c676b8ad4c6bd674da874f3f7d5701 Mon Sep 17 00:00:00 2001 From: Jan Sokolowski Date: Fri, 21 Jun 2024 10:54:19 -0700 Subject: ice: Rebuild TC queues on VSI queue reconfiguration TC queues needs to be correctly updated when the number of queues on a VSI is reconfigured, so netdev's queue and TC settings will be dynamically adjusted and could accurately represent the underlying hardware state after changes to the VSI queue counts. Fixes: 0754d65bd4be ("ice: Add infrastructure for mqprio support via ndo_setup_tc") Reviewed-by: Wojciech Drewek Signed-off-by: Jan Sokolowski Signed-off-by: Karen Ostrowska Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ice/ice_main.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 1766230abfff..55a42aad92a5 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -4139,7 +4139,7 @@ bool ice_is_wol_supported(struct ice_hw *hw) int ice_vsi_recfg_qs(struct ice_vsi *vsi, int new_rx, int new_tx, bool locked) { struct ice_pf *pf = vsi->back; - int err = 0, timeout = 50; + int i, err = 0, timeout = 50; if (!new_rx && !new_tx) return -EINVAL; @@ -4165,6 +4165,14 @@ int ice_vsi_recfg_qs(struct ice_vsi *vsi, int new_rx, int new_tx, bool locked) ice_vsi_close(vsi); ice_vsi_rebuild(vsi, ICE_VSI_FLAG_NO_INIT); + + ice_for_each_traffic_class(i) { + if (vsi->tc_cfg.ena_tc & BIT(i)) + netdev_set_tc_queue(vsi->netdev, + vsi->tc_cfg.tc_info[i].netdev_tc, + vsi->tc_cfg.tc_info[i].qcount_tx, + vsi->tc_cfg.tc_info[i].qoffset); + } ice_pf_dcb_recfg(pf, locked); ice_vsi_open(vsi); done: -- cgit v1.2.3 From 02ea312055da84e08e3e5bce2539c1ff11c8b5f2 Mon Sep 17 00:00:00 2001 From: Ratheesh Kannoth Date: Sat, 22 Jun 2024 12:14:37 +0530 Subject: octeontx2-pf: Fix coverity and klockwork issues in octeon PF driver Fix unintended sign extension and klockwork issues. These are not real issue but for sanity checks. Signed-off-by: Ratheesh Kannoth Signed-off-by: Suman Ghosh Signed-off-by: David S. Miller --- .../ethernet/marvell/octeontx2/nic/otx2_common.c | 10 ++-- .../net/ethernet/marvell/octeontx2/nic/otx2_reg.h | 55 +++++++++++----------- .../net/ethernet/marvell/octeontx2/nic/otx2_txrx.c | 2 +- drivers/net/ethernet/marvell/octeontx2/nic/qos.c | 3 +- 4 files changed, 35 insertions(+), 35 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c index a85ac039d779..87d5776e3b88 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c @@ -648,14 +648,14 @@ int otx2_txschq_config(struct otx2_nic *pfvf, int lvl, int prio, bool txschq_for } else if (lvl == NIX_TXSCH_LVL_TL4) { parent = schq_list[NIX_TXSCH_LVL_TL3][prio]; req->reg[0] = NIX_AF_TL4X_PARENT(schq); - req->regval[0] = parent << 16; + req->regval[0] = (u64)parent << 16; req->num_regs++; req->reg[1] = NIX_AF_TL4X_SCHEDULE(schq); req->regval[1] = dwrr_val; } else if (lvl == NIX_TXSCH_LVL_TL3) { parent = schq_list[NIX_TXSCH_LVL_TL2][prio]; req->reg[0] = NIX_AF_TL3X_PARENT(schq); - req->regval[0] = parent << 16; + req->regval[0] = (u64)parent << 16; req->num_regs++; req->reg[1] = NIX_AF_TL3X_SCHEDULE(schq); req->regval[1] = dwrr_val; @@ -670,11 +670,11 @@ int otx2_txschq_config(struct otx2_nic *pfvf, int lvl, int prio, bool txschq_for } else if (lvl == NIX_TXSCH_LVL_TL2) { parent = schq_list[NIX_TXSCH_LVL_TL1][prio]; req->reg[0] = NIX_AF_TL2X_PARENT(schq); - req->regval[0] = parent << 16; + req->regval[0] = (u64)parent << 16; req->num_regs++; req->reg[1] = NIX_AF_TL2X_SCHEDULE(schq); - req->regval[1] = TXSCH_TL1_DFLT_RR_PRIO << 24 | dwrr_val; + req->regval[1] = (u64)hw->txschq_aggr_lvl_rr_prio << 24 | dwrr_val; if (lvl == hw->txschq_link_cfg_lvl) { req->num_regs++; @@ -698,7 +698,7 @@ int otx2_txschq_config(struct otx2_nic *pfvf, int lvl, int prio, bool txschq_for req->num_regs++; req->reg[1] = NIX_AF_TL1X_TOPOLOGY(schq); - req->regval[1] = (TXSCH_TL1_DFLT_RR_PRIO << 1); + req->regval[1] = hw->txschq_aggr_lvl_rr_prio << 1; req->num_regs++; req->reg[2] = NIX_AF_TL1X_CIR(schq); diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h index 45a32e4b49d1..e3aee6e36215 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h @@ -139,33 +139,34 @@ #define NIX_LF_CINTX_ENA_W1C(a) (NIX_LFBASE | 0xD50 | (a) << 12) /* NIX AF transmit scheduler registers */ -#define NIX_AF_SMQX_CFG(a) (0x700 | (a) << 16) -#define NIX_AF_TL1X_SCHEDULE(a) (0xC00 | (a) << 16) -#define NIX_AF_TL1X_CIR(a) (0xC20 | (a) << 16) -#define NIX_AF_TL1X_TOPOLOGY(a) (0xC80 | (a) << 16) -#define NIX_AF_TL2X_PARENT(a) (0xE88 | (a) << 16) -#define NIX_AF_TL2X_SCHEDULE(a) (0xE00 | (a) << 16) -#define NIX_AF_TL2X_TOPOLOGY(a) (0xE80 | (a) << 16) -#define NIX_AF_TL2X_CIR(a) (0xE20 | (a) << 16) -#define NIX_AF_TL2X_PIR(a) (0xE30 | (a) << 16) -#define NIX_AF_TL3X_PARENT(a) (0x1088 | (a) << 16) -#define NIX_AF_TL3X_SCHEDULE(a) (0x1000 | (a) << 16) -#define NIX_AF_TL3X_SHAPE(a) (0x1010 | (a) << 16) -#define NIX_AF_TL3X_CIR(a) (0x1020 | (a) << 16) -#define NIX_AF_TL3X_PIR(a) (0x1030 | (a) << 16) -#define NIX_AF_TL3X_TOPOLOGY(a) (0x1080 | (a) << 16) -#define NIX_AF_TL4X_PARENT(a) (0x1288 | (a) << 16) -#define NIX_AF_TL4X_SCHEDULE(a) (0x1200 | (a) << 16) -#define NIX_AF_TL4X_SHAPE(a) (0x1210 | (a) << 16) -#define NIX_AF_TL4X_CIR(a) (0x1220 | (a) << 16) -#define NIX_AF_TL4X_PIR(a) (0x1230 | (a) << 16) -#define NIX_AF_TL4X_TOPOLOGY(a) (0x1280 | (a) << 16) -#define NIX_AF_MDQX_SCHEDULE(a) (0x1400 | (a) << 16) -#define NIX_AF_MDQX_SHAPE(a) (0x1410 | (a) << 16) -#define NIX_AF_MDQX_CIR(a) (0x1420 | (a) << 16) -#define NIX_AF_MDQX_PIR(a) (0x1430 | (a) << 16) -#define NIX_AF_MDQX_PARENT(a) (0x1480 | (a) << 16) -#define NIX_AF_TL3_TL2X_LINKX_CFG(a, b) (0x1700 | (a) << 16 | (b) << 3) +#define NIX_AF_SMQX_CFG(a) (0x700 | (u64)(a) << 16) +#define NIX_AF_TL4X_SDP_LINK_CFG(a) (0xB10 | (u64)(a) << 16) +#define NIX_AF_TL1X_SCHEDULE(a) (0xC00 | (u64)(a) << 16) +#define NIX_AF_TL1X_CIR(a) (0xC20 | (u64)(a) << 16) +#define NIX_AF_TL1X_TOPOLOGY(a) (0xC80 | (u64)(a) << 16) +#define NIX_AF_TL2X_PARENT(a) (0xE88 | (u64)(a) << 16) +#define NIX_AF_TL2X_SCHEDULE(a) (0xE00 | (u64)(a) << 16) +#define NIX_AF_TL2X_TOPOLOGY(a) (0xE80 | (u64)(a) << 16) +#define NIX_AF_TL2X_CIR(a) (0xE20 | (u64)(a) << 16) +#define NIX_AF_TL2X_PIR(a) (0xE30 | (u64)(a) << 16) +#define NIX_AF_TL3X_PARENT(a) (0x1088 | (u64)(a) << 16) +#define NIX_AF_TL3X_SCHEDULE(a) (0x1000 | (u64)(a) << 16) +#define NIX_AF_TL3X_SHAPE(a) (0x1010 | (u64)(a) << 16) +#define NIX_AF_TL3X_CIR(a) (0x1020 | (u64)(a) << 16) +#define NIX_AF_TL3X_PIR(a) (0x1030 | (u64)(a) << 16) +#define NIX_AF_TL3X_TOPOLOGY(a) (0x1080 | (u64)(a) << 16) +#define NIX_AF_TL4X_PARENT(a) (0x1288 | (u64)(a) << 16) +#define NIX_AF_TL4X_SCHEDULE(a) (0x1200 | (u64)(a) << 16) +#define NIX_AF_TL4X_SHAPE(a) (0x1210 | (u64)(a) << 16) +#define NIX_AF_TL4X_CIR(a) (0x1220 | (u64)(a) << 16) +#define NIX_AF_TL4X_PIR(a) (0x1230 | (u64)(a) << 16) +#define NIX_AF_TL4X_TOPOLOGY(a) (0x1280 | (u64)(a) << 16) +#define NIX_AF_MDQX_SCHEDULE(a) (0x1400 | (u64)(a) << 16) +#define NIX_AF_MDQX_SHAPE(a) (0x1410 | (u64)(a) << 16) +#define NIX_AF_MDQX_CIR(a) (0x1420 | (u64)(a) << 16) +#define NIX_AF_MDQX_PIR(a) (0x1430 | (u64)(a) << 16) +#define NIX_AF_MDQX_PARENT(a) (0x1480 | (u64)(a) << 16) +#define NIX_AF_TL3_TL2X_LINKX_CFG(a, b) (0x1700 | (u64)(a) << 16 | (b) << 3) /* LMT LF registers */ #define LMT_LFBASE BIT_ULL(RVU_FUNC_BLKADDR_SHIFT) diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c index 929b4eac25d9..3eb85949677a 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c @@ -513,7 +513,7 @@ process_cqe: static void otx2_adjust_adaptive_coalese(struct otx2_nic *pfvf, struct otx2_cq_poll *cq_poll) { - struct dim_sample dim_sample; + struct dim_sample dim_sample = { 0 }; u64 rx_frames, rx_bytes; u64 tx_frames, tx_bytes; diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/qos.c b/drivers/net/ethernet/marvell/octeontx2/nic/qos.c index edac008099c0..0f844c14485a 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/qos.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/qos.c @@ -153,7 +153,6 @@ static void __otx2_qos_txschq_cfg(struct otx2_nic *pfvf, num_regs++; otx2_config_sched_shaping(pfvf, node, cfg, &num_regs); - } else if (level == NIX_TXSCH_LVL_TL4) { otx2_config_sched_shaping(pfvf, node, cfg, &num_regs); } else if (level == NIX_TXSCH_LVL_TL3) { @@ -176,7 +175,7 @@ static void __otx2_qos_txschq_cfg(struct otx2_nic *pfvf, /* check if node is root */ if (node->qid == OTX2_QOS_QID_INNER && !node->parent) { cfg->reg[num_regs] = NIX_AF_TL2X_SCHEDULE(node->schq); - cfg->regval[num_regs] = TXSCH_TL1_DFLT_RR_PRIO << 24 | + cfg->regval[num_regs] = (u64)hw->txschq_aggr_lvl_rr_prio << 24 | mtu_to_dwrr_weight(pfvf, pfvf->tx_max_pktlen); num_regs++; -- cgit v1.2.3 From 058722ee350c0bdd664e467156feb2bf5d9cc271 Mon Sep 17 00:00:00 2001 From: Jose Ignacio Tornos Martinez Date: Thu, 20 Jun 2024 15:34:31 +0200 Subject: net: usb: ax88179_178a: improve link status logs Avoid spurious link status logs that may ultimately be wrong; for example, if the link is set to down with the cable plugged, then the cable is unplugged and after this the link is set to up, the last new log that is appearing is incorrectly telling that the link is up. In order to avoid errors, show link status logs after link_reset processing, and in order to avoid spurious as much as possible, only show the link loss when some link status change is detected. cc: stable@vger.kernel.org Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Ignacio Tornos Martinez Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/usb/ax88179_178a.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index c2fb736f78b2..b034ef8a73ea 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -326,7 +326,8 @@ static void ax88179_status(struct usbnet *dev, struct urb *urb) if (netif_carrier_ok(dev->net) != link) { usbnet_link_change(dev, link, 1); - netdev_info(dev->net, "ax88179 - Link status is: %d\n", link); + if (!link) + netdev_info(dev->net, "ax88179 - Link status is: 0\n"); } } @@ -1542,6 +1543,7 @@ static int ax88179_link_reset(struct usbnet *dev) GMII_PHY_PHYSR, 2, &tmp16); if (!(tmp16 & GMII_PHY_PHYSR_LINK)) { + netdev_info(dev->net, "ax88179 - Link status is: 0\n"); return 0; } else if (GMII_PHY_PHYSR_GIGA == (tmp16 & GMII_PHY_PHYSR_SMASK)) { mode |= AX_MEDIUM_GIGAMODE | AX_MEDIUM_EN_125MHZ; @@ -1579,6 +1581,8 @@ static int ax88179_link_reset(struct usbnet *dev) netif_carrier_on(dev->net); + netdev_info(dev->net, "ax88179 - Link status is: 1\n"); + return 0; } -- cgit v1.2.3 From 0983d288caf984de0202c66641577b739caad561 Mon Sep 17 00:00:00 2001 From: Nick Child Date: Thu, 20 Jun 2024 10:23:11 -0500 Subject: ibmvnic: Add tx check to prevent skb leak Below is a summary of how the driver stores a reference to an skb during transmit: tx_buff[free_map[consumer_index]]->skb = new_skb; free_map[consumer_index] = IBMVNIC_INVALID_MAP; consumer_index ++; Where variable data looks like this: free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3] consumer_index^ tx_buff == [skb=null, skb=, skb=, skb=null, skb=null] The driver has checks to ensure that free_map[consumer_index] pointed to a valid index but there was no check to ensure that this index pointed to an unused/null skb address. So, if, by some chance, our free_map and tx_buff lists become out of sync then we were previously risking an skb memory leak. This could then cause tcp congestion control to stop sending packets, eventually leading to ETIMEDOUT. Therefore, add a conditional to ensure that the skb address is null. If not then warn the user (because this is still a bug that should be patched) and free the old pointer to prevent memleak/tcp problems. Signed-off-by: Nick Child Signed-off-by: Paolo Abeni --- drivers/net/ethernet/ibm/ibmvnic.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 5490f0f9c112..23ebeb143987 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -2482,6 +2482,18 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev) (tx_pool->consumer_index + 1) % tx_pool->num_buffers; tx_buff = &tx_pool->tx_buff[bufidx]; + + /* Sanity checks on our free map to make sure it points to an index + * that is not being occupied by another skb. If skb memory is + * not freed then we see congestion control kick in and halt tx. + */ + if (unlikely(tx_buff->skb)) { + dev_warn_ratelimited(dev, "TX free map points to untracked skb (%s %d idx=%d)\n", + skb_is_gso(skb) ? "tso_pool" : "tx_pool", + queue_num, bufidx); + dev_kfree_skb_any(tx_buff->skb); + } + tx_buff->skb = skb; tx_buff->index = bufidx; tx_buff->pool_index = queue_num; -- cgit v1.2.3 From b1c4b4d45263241ec6c2405a8df8265d4b58e707 Mon Sep 17 00:00:00 2001 From: Tristram Ha Date: Fri, 21 Jun 2024 15:34:22 -0700 Subject: net: dsa: microchip: fix wrong register write when masking interrupt The switch global port interrupt mask, REG_SW_PORT_INT_MASK__4, is defined as 0x001C in ksz9477_reg.h. The designers used 32-bit value in anticipation for increase of port count in future product but currently the maximum port count is 7 and the effective value is 0x7F in register 0x001F. Each port has its own interrupt mask and is defined as 0x#01F. It uses only 4 bits for different interrupts. The developer who implemented the current interrupt mechanism in the switch driver noticed there are similarities between the mechanism to mask port interrupts in global interrupt and individual interrupts in each port and so used the same code to handle these interrupts. He updated the code to use the new macro REG_SW_PORT_INT_MASK__1 which is defined as 0x1F in ksz_common.h but he forgot to update the 32-bit write to 8-bit as now the mask registers are 0x1F and 0x#01F. In addition all KSZ switches other than the KSZ9897/KSZ9893 and LAN937X families use only 8-bit access and so this common code will eventually be changed to accommodate them. Fixes: e1add7dd6183 ("net: dsa: microchip: use common irq routines for girq and pirq") Signed-off-by: Tristram Ha Link: https://lore.kernel.org/r/1719009262-2948-1-git-send-email-Tristram.Ha@microchip.com Signed-off-by: Paolo Abeni --- drivers/net/dsa/microchip/ksz_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 0433109b42e5..0580b2fee21c 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -2196,7 +2196,7 @@ static void ksz_irq_bus_sync_unlock(struct irq_data *d) struct ksz_device *dev = kirq->dev; int ret; - ret = ksz_write32(dev, kirq->reg_mask, kirq->masked); + ret = ksz_write8(dev, kirq->reg_mask, kirq->masked); if (ret) dev_err(dev->dev, "failed to change IRQ mask\n"); -- cgit v1.2.3 From 84b767f9e34fdb143c09e66a2a20722fc2921821 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Mon, 24 Jun 2024 10:50:15 -0700 Subject: ionic: use dev_consume_skb_any outside of napi If we're not in a NAPI softirq context, we need to be careful about how we call napi_consume_skb(), specifically we need to call it with budget==0 to signal to it that we're not in a safe context. This was found while running some configuration stress testing of traffic and a change queue config loop running, and this curious note popped out: [ 4371.402645] BUG: using smp_processor_id() in preemptible [00000000] code: ethtool/20545 [ 4371.402897] caller is napi_skb_cache_put+0x16/0x80 [ 4371.403120] CPU: 25 PID: 20545 Comm: ethtool Kdump: loaded Tainted: G OE 6.10.0-rc3-netnext+ #8 [ 4371.403302] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 01/23/2021 [ 4371.403460] Call Trace: [ 4371.403613] [ 4371.403758] dump_stack_lvl+0x4f/0x70 [ 4371.403904] check_preemption_disabled+0xc1/0xe0 [ 4371.404051] napi_skb_cache_put+0x16/0x80 [ 4371.404199] ionic_tx_clean+0x18a/0x240 [ionic] [ 4371.404354] ionic_tx_cq_service+0xc4/0x200 [ionic] [ 4371.404505] ionic_tx_flush+0x15/0x70 [ionic] [ 4371.404653] ? ionic_lif_qcq_deinit.isra.23+0x5b/0x70 [ionic] [ 4371.404805] ionic_txrx_deinit+0x71/0x190 [ionic] [ 4371.404956] ionic_reconfigure_queues+0x5f5/0xff0 [ionic] [ 4371.405111] ionic_set_ringparam+0x2e8/0x3e0 [ionic] [ 4371.405265] ethnl_set_rings+0x1f1/0x300 [ 4371.405418] ethnl_default_set_doit+0xbb/0x160 [ 4371.405571] genl_family_rcv_msg_doit+0xff/0x130 [...] I found that ionic_tx_clean() calls napi_consume_skb() which calls napi_skb_cache_put(), but before that last call is the note /* Zero budget indicate non-NAPI context called us, like netpoll */ and DEBUG_NET_WARN_ON_ONCE(!in_softirq()); Those are pretty big hints that we're doing it wrong. We can pass a context hint down through the calls to let ionic_tx_clean() know what we're doing so it can call napi_consume_skb() correctly. Fixes: 386e69865311 ("ionic: Make use napi_consume_skb") Signed-off-by: Shannon Nelson Link: https://patch.msgid.link/20240624175015.4520-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/pensando/ionic/ionic_dev.h | 4 +++- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 2 +- drivers/net/ethernet/pensando/ionic/ionic_txrx.c | 28 ++++++++++++++---------- 3 files changed, 21 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/pensando/ionic/ionic_dev.h b/drivers/net/ethernet/pensando/ionic/ionic_dev.h index f30eee4a5a80..b6c01a88098d 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_dev.h +++ b/drivers/net/ethernet/pensando/ionic/ionic_dev.h @@ -375,7 +375,9 @@ typedef void (*ionic_cq_done_cb)(void *done_arg); unsigned int ionic_cq_service(struct ionic_cq *cq, unsigned int work_to_do, ionic_cq_cb cb, ionic_cq_done_cb done_cb, void *done_arg); -unsigned int ionic_tx_cq_service(struct ionic_cq *cq, unsigned int work_to_do); +unsigned int ionic_tx_cq_service(struct ionic_cq *cq, + unsigned int work_to_do, + bool in_napi); int ionic_q_init(struct ionic_lif *lif, struct ionic_dev *idev, struct ionic_queue *q, unsigned int index, const char *name, diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index 1934e9d6d9e4..1837a30ba08a 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -1189,7 +1189,7 @@ static int ionic_adminq_napi(struct napi_struct *napi, int budget) ionic_rx_service, NULL, NULL); if (lif->hwstamp_txq) - tx_work = ionic_tx_cq_service(&lif->hwstamp_txq->cq, budget); + tx_work = ionic_tx_cq_service(&lif->hwstamp_txq->cq, budget, !!budget); work_done = max(max(n_work, a_work), max(rx_work, tx_work)); if (work_done < budget && napi_complete_done(napi, work_done)) { diff --git a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c index aed7d9cbce03..9fdd7cd3ef19 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c @@ -23,7 +23,8 @@ static void ionic_tx_desc_unmap_bufs(struct ionic_queue *q, static void ionic_tx_clean(struct ionic_queue *q, struct ionic_tx_desc_info *desc_info, - struct ionic_txq_comp *comp); + struct ionic_txq_comp *comp, + bool in_napi); static inline void ionic_txq_post(struct ionic_queue *q, bool ring_dbell) { @@ -944,7 +945,7 @@ int ionic_tx_napi(struct napi_struct *napi, int budget) u32 work_done = 0; u32 flags = 0; - work_done = ionic_tx_cq_service(cq, budget); + work_done = ionic_tx_cq_service(cq, budget, !!budget); if (unlikely(!budget)) return budget; @@ -1028,7 +1029,7 @@ int ionic_txrx_napi(struct napi_struct *napi, int budget) txqcq = lif->txqcqs[qi]; txcq = &lif->txqcqs[qi]->cq; - tx_work_done = ionic_tx_cq_service(txcq, IONIC_TX_BUDGET_DEFAULT); + tx_work_done = ionic_tx_cq_service(txcq, IONIC_TX_BUDGET_DEFAULT, !!budget); if (unlikely(!budget)) return budget; @@ -1161,7 +1162,8 @@ static void ionic_tx_desc_unmap_bufs(struct ionic_queue *q, static void ionic_tx_clean(struct ionic_queue *q, struct ionic_tx_desc_info *desc_info, - struct ionic_txq_comp *comp) + struct ionic_txq_comp *comp, + bool in_napi) { struct ionic_tx_stats *stats = q_to_tx_stats(q); struct ionic_qcq *qcq = q_to_qcq(q); @@ -1213,11 +1215,13 @@ static void ionic_tx_clean(struct ionic_queue *q, desc_info->bytes = skb->len; stats->clean++; - napi_consume_skb(skb, 1); + napi_consume_skb(skb, likely(in_napi) ? 1 : 0); } static bool ionic_tx_service(struct ionic_cq *cq, - unsigned int *total_pkts, unsigned int *total_bytes) + unsigned int *total_pkts, + unsigned int *total_bytes, + bool in_napi) { struct ionic_tx_desc_info *desc_info; struct ionic_queue *q = cq->bound_q; @@ -1239,7 +1243,7 @@ static bool ionic_tx_service(struct ionic_cq *cq, desc_info->bytes = 0; index = q->tail_idx; q->tail_idx = (q->tail_idx + 1) & (q->num_descs - 1); - ionic_tx_clean(q, desc_info, comp); + ionic_tx_clean(q, desc_info, comp, in_napi); if (desc_info->skb) { pkts++; bytes += desc_info->bytes; @@ -1253,7 +1257,9 @@ static bool ionic_tx_service(struct ionic_cq *cq, return true; } -unsigned int ionic_tx_cq_service(struct ionic_cq *cq, unsigned int work_to_do) +unsigned int ionic_tx_cq_service(struct ionic_cq *cq, + unsigned int work_to_do, + bool in_napi) { unsigned int work_done = 0; unsigned int bytes = 0; @@ -1262,7 +1268,7 @@ unsigned int ionic_tx_cq_service(struct ionic_cq *cq, unsigned int work_to_do) if (work_to_do == 0) return 0; - while (ionic_tx_service(cq, &pkts, &bytes)) { + while (ionic_tx_service(cq, &pkts, &bytes, in_napi)) { if (cq->tail_idx == cq->num_descs - 1) cq->done_color = !cq->done_color; cq->tail_idx = (cq->tail_idx + 1) & (cq->num_descs - 1); @@ -1288,7 +1294,7 @@ void ionic_tx_flush(struct ionic_cq *cq) { u32 work_done; - work_done = ionic_tx_cq_service(cq, cq->num_descs); + work_done = ionic_tx_cq_service(cq, cq->num_descs, false); if (work_done) ionic_intr_credits(cq->idev->intr_ctrl, cq->bound_intr->index, work_done, IONIC_INTR_CRED_RESET_COALESCE); @@ -1305,7 +1311,7 @@ void ionic_tx_empty(struct ionic_queue *q) desc_info = &q->tx_info[q->tail_idx]; desc_info->bytes = 0; q->tail_idx = (q->tail_idx + 1) & (q->num_descs - 1); - ionic_tx_clean(q, desc_info, NULL); + ionic_tx_clean(q, desc_info, NULL, false); if (desc_info->skb) { pkts++; bytes += desc_info->bytes; -- cgit v1.2.3 From 77453e2b015b5ced5b3f45364dd5a72dfc3bdecb Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Tue, 25 Jun 2024 12:22:36 +0200 Subject: net: usb: qmi_wwan: add Telit FN912 compositions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add the following Telit FN912 compositions: 0x3000: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=3000 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN912 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x3001: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=3001 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN912 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas Acked-by: Bjørn Mork Link: https://patch.msgid.link/20240625102236.69539-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/usb/qmi_wwan.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 663e46348ce3..386d62769ded 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1372,6 +1372,8 @@ static const struct usb_device_id products[] = { {QMI_QUIRK_SET_DTR(0x1bc7, 0x1260, 2)}, /* Telit LE910Cx */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1261, 2)}, /* Telit LE910Cx */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1900, 1)}, /* Telit LN940 series */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x3000, 0)}, /* Telit FN912 series */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x3001, 0)}, /* Telit FN912 series */ {QMI_FIXED_INTF(0x1c9e, 0x9801, 3)}, /* Telewell TW-3G HSPA+ */ {QMI_FIXED_INTF(0x1c9e, 0x9803, 4)}, /* Telewell TW-3G HSPA+ */ {QMI_FIXED_INTF(0x1c9e, 0x9b01, 3)}, /* XS Stick W100-2 from 4G Systems */ -- cgit v1.2.3 From 1864b8224195d0e43ddb92a8151f54f6562090cc Mon Sep 17 00:00:00 2001 From: Ma Ke Date: Tue, 25 Jun 2024 21:03:14 +0800 Subject: net: mana: Fix possible double free in error handling path When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), callback function adev_release calls kfree(madev). We shouldn't call kfree(madev) again in the error handling path. Set 'madev' to NULL. Fixes: a69839d4327d ("net: mana: Add support for auxiliary device") Signed-off-by: Ma Ke Link: https://patch.msgid.link/20240625130314.2661257-1-make24@iscas.ac.cn Signed-off-by: Paolo Abeni --- drivers/net/ethernet/microsoft/mana/mana_en.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/microsoft/mana/mana_en.c b/drivers/net/ethernet/microsoft/mana/mana_en.c index d087cf954f75..608ad31a9702 100644 --- a/drivers/net/ethernet/microsoft/mana/mana_en.c +++ b/drivers/net/ethernet/microsoft/mana/mana_en.c @@ -2798,6 +2798,8 @@ static int add_adev(struct gdma_dev *gd) if (ret) goto init_fail; + /* madev is owned by the auxiliary device */ + madev = NULL; ret = auxiliary_device_add(adev); if (ret) goto add_fail; -- cgit v1.2.3