From 341673f1412cda87bcccb66f6ac4f01861657122 Mon Sep 17 00:00:00 2001 From: Peter Meerwald <pmeerw@pmeerw.net> Date: Sun, 23 Jun 2013 22:28:00 +0100 Subject: iio: reword help text of several IIO_ST drivers Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: "Denis Ciocca" <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> --- drivers/iio/gyro/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/iio/gyro/Kconfig') diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig index 8498e9dcda68..1fdcc8451fdf 100644 --- a/drivers/iio/gyro/Kconfig +++ b/drivers/iio/gyro/Kconfig @@ -58,8 +58,8 @@ config IIO_ST_GYRO_3AXIS Say yes here to build support for STMicroelectronics gyroscopes: L3G4200D, LSM330DL, L3GD20, L3GD20H, LSM330DLC, L3G4IS, LSM330. - This driver can also be built as a module. If so, will be created - these modules: + This driver can also be built as a module. If so, these modules + will be created: - st_gyro (core functions for the driver [it is mandatory]); - st_gyro_i2c (necessary for the I2C devices [optional*]); - st_gyro_spi (necessary for the SPI devices [optional*]); -- cgit v1.2.3 From 3edc84e6054616b87a3d155fe65fa51f2eae82aa Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen <lars@metafoo.de> Date: Mon, 15 Jul 2013 08:45:00 +0100 Subject: iio: Add a comment to about alphabetical order to Kconfigs and Makefiles Keeping Makefile and Kconfig entries in alphabetical order usually works better than just appending new entries at the end, since it reduces the amount of conflicts. This patch adds a comment to the IIO Kconfig and Makefile files to document that the entries should be kept in alphabetical order. Also reorder those entries which weren't in alphabetical order yet. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> --- drivers/iio/accel/Kconfig | 16 +++++++++------- drivers/iio/accel/Makefile | 4 ++-- drivers/iio/adc/Kconfig | 36 +++++++++++++++++++----------------- drivers/iio/adc/Makefile | 1 + drivers/iio/amplifiers/Kconfig | 2 ++ drivers/iio/amplifiers/Makefile | 1 + drivers/iio/common/Makefile | 1 + drivers/iio/dac/Kconfig | 38 ++++++++++++++++++++------------------ drivers/iio/dac/Makefile | 1 + drivers/iio/frequency/Kconfig | 1 + drivers/iio/frequency/Makefile | 1 + drivers/iio/gyro/Kconfig | 2 ++ drivers/iio/gyro/Makefile | 1 + drivers/iio/imu/Kconfig | 2 ++ drivers/iio/imu/Makefile | 1 + drivers/iio/light/Kconfig | 24 +++++++++++++----------- drivers/iio/light/Makefile | 3 ++- drivers/iio/magnetometer/Kconfig | 2 ++ drivers/iio/magnetometer/Makefile | 1 + drivers/iio/pressure/Kconfig | 2 ++ drivers/iio/pressure/Makefile | 1 + drivers/iio/trigger/Kconfig | 2 ++ drivers/iio/trigger/Makefile | 1 + 23 files changed, 88 insertions(+), 56 deletions(-) (limited to 'drivers/iio/gyro/Kconfig') diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index a00267525b66..61ca7ec0f3e7 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -1,6 +1,8 @@ # # Accelerometer drivers # +# When adding new entries keep the list in alphabetical order + menu "Accelerometers" config HID_SENSOR_ACCEL_3D @@ -14,13 +16,6 @@ config HID_SENSOR_ACCEL_3D Say yes here to build support for the HID SENSOR accelerometers 3D. -config KXSD9 - tristate "Kionix KXSD9 Accelerometer Driver" - depends on SPI - help - Say yes here to build support for the Kionix KXSD9 accelerometer. - Currently this only supports the device via an SPI interface. - config IIO_ST_ACCEL_3AXIS tristate "STMicroelectronics accelerometers 3-Axis Driver" depends on (I2C || SPI_MASTER) && SYSFS @@ -51,4 +46,11 @@ config IIO_ST_ACCEL_SPI_3AXIS depends on IIO_ST_ACCEL_3AXIS depends on IIO_ST_SENSORS_SPI +config KXSD9 + tristate "Kionix KXSD9 Accelerometer Driver" + depends on SPI + help + Say yes here to build support for the Kionix KXSD9 accelerometer. + Currently this only supports the device via an SPI interface. + endmenu diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 87d8fa264894..2f95a3dffa47 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -2,7 +2,9 @@ # Makefile for industrial I/O accelerometer drivers # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o +obj-$(CONFIG_KXSD9) += kxsd9.o obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o st_accel-y := st_accel_core.o @@ -10,5 +12,3 @@ st_accel-$(CONFIG_IIO_BUFFER) += st_accel_buffer.o obj-$(CONFIG_IIO_ST_ACCEL_I2C_3AXIS) += st_accel_i2c.o obj-$(CONFIG_IIO_ST_ACCEL_SPI_3AXIS) += st_accel_spi.o - -obj-$(CONFIG_KXSD9) += kxsd9.o diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 2eced9d53a0b..dd6bd1bff4b7 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -1,6 +1,8 @@ # # ADC drivers # +# When adding new entries keep the list in alphabetical order + menu "Analog to digital converters" config AD_SIGMA_DELTA @@ -30,17 +32,20 @@ config AD7298 To compile this driver as a module, choose M here: the module will be called ad7298. -config AD7923 - tristate "Analog Devices AD7923 and similar ADCs driver" +config AD7476 + tristate "Analog Devices AD7476 and similar 1-channel ADCs driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - Say yes here to build support for Analog Devices - AD7904, AD7914, AD7923, AD7924 4 Channel ADCs. + Say yes here to build support for Analog Devices AD7273, AD7274, AD7276, + AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, + AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC). + + If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the - module will be called ad7923. + module will be called ad7476. config AD7791 tristate "Analog Devices AD7791 ADC driver" @@ -66,33 +71,30 @@ config AD7793 To compile this driver as a module, choose M here: the module will be called AD7793. -config AD7476 - tristate "Analog Devices AD7476 and similar 1-channel ADCs driver" +config AD7887 + tristate "Analog Devices AD7887 ADC driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - Say yes here to build support for Analog Devices AD7273, AD7274, AD7276, - AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, - AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC). - + Say yes here to build support for Analog Devices + AD7887 SPI analog to digital converter (ADC). If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the - module will be called ad7476. + module will be called ad7887. -config AD7887 - tristate "Analog Devices AD7887 ADC driver" +config AD7923 + tristate "Analog Devices AD7923 and similar ADCs driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices - AD7887 SPI analog to digital converter (ADC). - If unsure, say N (but it's safe to say "Y"). + AD7904, AD7914, AD7923, AD7924 4 Channel ADCs. To compile this driver as a module, choose M here: the - module will be called ad7887. + module will be called ad7923. config AT91_ADC tristate "Atmel AT91 ADC" diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index d184139d1cd7..2a4324ec7f14 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -2,6 +2,7 @@ # Makefile for IIO ADC drivers # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o obj-$(CONFIG_AD7266) += ad7266.o obj-$(CONFIG_AD7298) += ad7298.o diff --git a/drivers/iio/amplifiers/Kconfig b/drivers/iio/amplifiers/Kconfig index 05d707ed7d4f..e9c5f2cd9257 100644 --- a/drivers/iio/amplifiers/Kconfig +++ b/drivers/iio/amplifiers/Kconfig @@ -1,6 +1,8 @@ # # Gain Amplifiers, etc. # +# When adding new entries keep the list in alphabetical order + menu "Amplifiers" config AD8366 diff --git a/drivers/iio/amplifiers/Makefile b/drivers/iio/amplifiers/Makefile index a6ca366908e0..8da4b787898a 100644 --- a/drivers/iio/amplifiers/Makefile +++ b/drivers/iio/amplifiers/Makefile @@ -2,4 +2,5 @@ # Makefile iio/amplifiers # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_AD8366) += ad8366.o diff --git a/drivers/iio/common/Makefile b/drivers/iio/common/Makefile index c2352beb5d97..3112df0060e9 100644 --- a/drivers/iio/common/Makefile +++ b/drivers/iio/common/Makefile @@ -6,5 +6,6 @@ # instead of duplicating in each module. # +# When adding new entries keep the list in alphabetical order obj-y += hid-sensors/ obj-y += st_sensors/ diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index b9fd4c7bfd98..3c6a78a75b78 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -1,6 +1,8 @@ # # DAC drivers # +# When adding new entries keep the list in alphabetical order + menu "Digital to analog converters" config AD5064 @@ -48,13 +50,6 @@ config AD5421 To compile this driver as module choose M here: the module will be called ad5421. -config AD5624R_SPI - tristate "Analog Devices AD5624/44/64R DAC spi driver" - depends on SPI - help - Say yes here to build support for Analog Devices AD5624R, AD5644R and - AD5664R converters (DAC). This driver uses the common SPI interface. - config AD5446 tristate "Analog Devices AD5446 and similar single channel DACs driver" depends on (SPI_MASTER && I2C!=m) || I2C @@ -87,6 +82,24 @@ config AD5504 To compile this driver as a module, choose M here: the module will be called ad5504. +config AD5624R_SPI + tristate "Analog Devices AD5624/44/64R DAC spi driver" + depends on SPI + help + Say yes here to build support for Analog Devices AD5624R, AD5644R and + AD5664R converters (DAC). This driver uses the common SPI interface. + +config AD5686 + tristate "Analog Devices AD5686R/AD5685R/AD5684R DAC SPI driver" + depends on SPI + help + Say yes here to build support for Analog Devices AD5686R, AD5685R, + AD5684R, AD5791 Voltage Output Digital to + Analog Converter. + + To compile this driver as a module, choose M here: the + module will be called ad5686. + config AD5755 tristate "Analog Devices AD5755/AD5755-1/AD5757/AD5735/AD5737 DAC driver" depends on SPI_MASTER @@ -119,17 +132,6 @@ config AD5791 To compile this driver as a module, choose M here: the module will be called ad5791. -config AD5686 - tristate "Analog Devices AD5686R/AD5685R/AD5684R DAC SPI driver" - depends on SPI - help - Say yes here to build support for Analog Devices AD5686R, AD5685R, - AD5684R, AD5791 Voltage Output Digital to - Analog Converter. - - To compile this driver as a module, choose M here: the - module will be called ad5686. - config AD7303 tristate "Analog Devices AD7303 DAC driver" depends on SPI diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index c8d7ab6bff01..bb84ad64463f 100644 --- a/drivers/iio/dac/Makefile +++ b/drivers/iio/dac/Makefile @@ -2,6 +2,7 @@ # Makefile for industrial I/O DAC drivers # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_AD5360) += ad5360.o obj-$(CONFIG_AD5380) += ad5380.o obj-$(CONFIG_AD5421) += ad5421.o diff --git a/drivers/iio/frequency/Kconfig b/drivers/iio/frequency/Kconfig index 6aaa33ef4544..dc5e0b72882f 100644 --- a/drivers/iio/frequency/Kconfig +++ b/drivers/iio/frequency/Kconfig @@ -4,6 +4,7 @@ # Clock Distribution device drivers # Phase-Locked Loop (PLL) frequency synthesizers # +# When adding new entries keep the list in alphabetical order menu "Frequency Synthesizers DDS/PLL" diff --git a/drivers/iio/frequency/Makefile b/drivers/iio/frequency/Makefile index 00d26e5d1dc2..2bca03f3e2e3 100644 --- a/drivers/iio/frequency/Makefile +++ b/drivers/iio/frequency/Makefile @@ -2,5 +2,6 @@ # Makefile iio/frequency # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_AD9523) += ad9523.o obj-$(CONFIG_ADF4350) += adf4350.o diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig index 1fdcc8451fdf..5913735bca9a 100644 --- a/drivers/iio/gyro/Kconfig +++ b/drivers/iio/gyro/Kconfig @@ -1,6 +1,8 @@ # # IIO Digital Gyroscope Sensor drivers configuration # +# When adding new entries keep the list in alphabetical order + menu "Digital gyroscope sensors" config ADIS16080 diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile index e9dc034aa18b..36091d5a0f45 100644 --- a/drivers/iio/gyro/Makefile +++ b/drivers/iio/gyro/Makefile @@ -2,6 +2,7 @@ # Makefile for industrial I/O gyroscope sensor drivers # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_ADIS16080) += adis16080.o obj-$(CONFIG_ADIS16130) += adis16130.o obj-$(CONFIG_ADIS16136) += adis16136.o diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig index 4f40a10cb74f..663e88a1a3c1 100644 --- a/drivers/iio/imu/Kconfig +++ b/drivers/iio/imu/Kconfig @@ -1,6 +1,8 @@ # # IIO imu drivers configuration # +# When adding new entries keep the list in alphabetical order + menu "Inertial measurement units" config ADIS16400 diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile index f2f56ceaed26..114d2c17cbe2 100644 --- a/drivers/iio/imu/Makefile +++ b/drivers/iio/imu/Makefile @@ -2,6 +2,7 @@ # Makefile for Inertial Measurement Units # +# When adding new entries keep the list in alphabetical order adis16400-y := adis16400_core.o adis16400-$(CONFIG_IIO_BUFFER) += adis16400_buffer.o obj-$(CONFIG_ADIS16400) += adis16400.o diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 5ef1a396e0c9..3bd29f810e6d 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -1,6 +1,8 @@ # # Light sensors # +# When adding new entries keep the list in alphabetical order + menu "Light sensors" config ADJD_S311 @@ -15,6 +17,17 @@ config ADJD_S311 This driver can also be built as a module. If so, the module will be called adjd_s311. +config HID_SENSOR_ALS + depends on HID_SENSOR_HUB + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID ALS" + help + Say yes here to build support for the HID SENSOR + Ambient light sensor. + config SENSORS_LM3533 tristate "LM3533 ambient light sensor" depends on MFD_LM3533 @@ -52,15 +65,4 @@ config VCNL4000 To compile this driver as a module, choose M here: the module will be called vcnl4000. -config HID_SENSOR_ALS - depends on HID_SENSOR_HUB - select IIO_BUFFER - select IIO_TRIGGERED_BUFFER - select HID_SENSOR_IIO_COMMON - select HID_SENSOR_IIO_TRIGGER - tristate "HID ALS" - help - Say yes here to build support for the HID SENSOR - Ambient light sensor. - endmenu diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index 040d9c75f8e6..edef939861f0 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -2,8 +2,9 @@ # Makefile for IIO Light sensors # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_ADJD_S311) += adjd_s311.o +obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o obj-$(CONFIG_VCNL4000) += vcnl4000.o -obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index 4d55b1b851b3..4fa923f37b97 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -1,6 +1,8 @@ # # Magnetometer sensors # +# When adding new entries keep the list in alphabetical order + menu "Magnetometer sensors" config AK8975 diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile index 7f328e37fbab..f91b1b68d392 100644 --- a/drivers/iio/magnetometer/Makefile +++ b/drivers/iio/magnetometer/Makefile @@ -2,6 +2,7 @@ # Makefile for industrial I/O Magnetometer sensor drivers # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_AK8975) += ak8975.o obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 56ae8905c8e1..26fdc0bdb99d 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -1,6 +1,8 @@ # # Pressure drivers # +# When adding new entries keep the list in alphabetical order + menu "Pressure sensors" config IIO_ST_PRESS diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index d4bb33e5c846..be71464c2752 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -2,6 +2,7 @@ # Makefile for industrial I/O pressure drivers # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o st_pressure-y := st_pressure_core.o st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o diff --git a/drivers/iio/trigger/Kconfig b/drivers/iio/trigger/Kconfig index 0a4a5164963f..79996123a71b 100644 --- a/drivers/iio/trigger/Kconfig +++ b/drivers/iio/trigger/Kconfig @@ -1,6 +1,8 @@ # # Industrial I/O standalone triggers # +# When adding new entries keep the list in alphabetical order + menu "Triggers - standalone" config IIO_INTERRUPT_TRIGGER diff --git a/drivers/iio/trigger/Makefile b/drivers/iio/trigger/Makefile index ce319a51b6af..0694daecaf22 100644 --- a/drivers/iio/trigger/Makefile +++ b/drivers/iio/trigger/Makefile @@ -2,5 +2,6 @@ # Makefile for triggers not associated with iio-devices # +# When adding new entries keep the list in alphabetical order obj-$(CONFIG_IIO_INTERRUPT_TRIGGER) += iio-trig-interrupt.o obj-$(CONFIG_IIO_SYSFS_TRIGGER) += iio-trig-sysfs.o -- cgit v1.2.3 From 555d5a9f17ef71849cae57fd2efda60b50d325ce Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen <lars@metafoo.de> Date: Wed, 17 Jul 2013 15:44:00 +0100 Subject: staging:iio:adis16260: Move out of staging The drivers is in more or less good shape, conforms to the IIO ABI and none of the default static code checker report any problems, so move it out of staging. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> --- drivers/iio/gyro/Kconfig | 12 + drivers/iio/gyro/Makefile | 1 + drivers/iio/gyro/adis16260.c | 428 ++++++++++++++++++++++++++++++ drivers/staging/iio/gyro/Kconfig | 12 - drivers/staging/iio/gyro/Makefile | 3 - drivers/staging/iio/gyro/adis16260_core.c | 428 ------------------------------ 6 files changed, 441 insertions(+), 443 deletions(-) create mode 100644 drivers/iio/gyro/adis16260.c delete mode 100644 drivers/staging/iio/gyro/adis16260_core.c (limited to 'drivers/iio/gyro/Kconfig') diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig index 5913735bca9a..41c64a43bcab 100644 --- a/drivers/iio/gyro/Kconfig +++ b/drivers/iio/gyro/Kconfig @@ -28,6 +28,18 @@ config ADIS16136 Say yes here to build support for the Analog Devices ADIS16133, ADIS16135, ADIS16136 gyroscope devices. +config ADIS16260 + tristate "Analog Devices ADIS16260 Digital Gyroscope Sensor SPI driver" + depends on SPI + select IIO_ADIS_LIB + select IIO_ADIS_LIB_BUFFER if IIO_BUFFER + help + Say yes here to build support for Analog Devices ADIS16260 ADIS16265 + ADIS16250 ADIS16255 and ADIS16251 programmable digital gyroscope sensors. + + This driver can also be built as a module. If so, the module + will be called adis16260. + config ADXRS450 tristate "Analog Devices ADXRS450/3 Digital Output Gyroscope SPI driver" depends on SPI diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile index 36091d5a0f45..2f2752a4ea83 100644 --- a/drivers/iio/gyro/Makefile +++ b/drivers/iio/gyro/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_ADIS16080) += adis16080.o obj-$(CONFIG_ADIS16130) += adis16130.o obj-$(CONFIG_ADIS16136) += adis16136.o +obj-$(CONFIG_ADIS16260) += adis16260.o obj-$(CONFIG_ADXRS450) += adxrs450.o obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o diff --git a/drivers/iio/gyro/adis16260.c b/drivers/iio/gyro/adis16260.c new file mode 100644 index 000000000000..b4cf800717ad --- /dev/null +++ b/drivers/iio/gyro/adis16260.c @@ -0,0 +1,428 @@ +/* + * ADIS16260/ADIS16265 Programmable Digital Gyroscope Sensor Driver + * + * Copyright 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/interrupt.h> +#include <linux/mutex.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/spi/spi.h> +#include <linux/sysfs.h> +#include <linux/module.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/imu/adis.h> + +#define ADIS16260_STARTUP_DELAY 220 /* ms */ + +#define ADIS16260_FLASH_CNT 0x00 /* Flash memory write count */ +#define ADIS16260_SUPPLY_OUT 0x02 /* Power supply measurement */ +#define ADIS16260_GYRO_OUT 0x04 /* X-axis gyroscope output */ +#define ADIS16260_AUX_ADC 0x0A /* analog input channel measurement */ +#define ADIS16260_TEMP_OUT 0x0C /* internal temperature measurement */ +#define ADIS16260_ANGL_OUT 0x0E /* angle displacement */ +#define ADIS16260_GYRO_OFF 0x14 /* Calibration, offset/bias adjustment */ +#define ADIS16260_GYRO_SCALE 0x16 /* Calibration, scale adjustment */ +#define ADIS16260_ALM_MAG1 0x20 /* Alarm 1 magnitude/polarity setting */ +#define ADIS16260_ALM_MAG2 0x22 /* Alarm 2 magnitude/polarity setting */ +#define ADIS16260_ALM_SMPL1 0x24 /* Alarm 1 dynamic rate of change setting */ +#define ADIS16260_ALM_SMPL2 0x26 /* Alarm 2 dynamic rate of change setting */ +#define ADIS16260_ALM_CTRL 0x28 /* Alarm control */ +#define ADIS16260_AUX_DAC 0x30 /* Auxiliary DAC data */ +#define ADIS16260_GPIO_CTRL 0x32 /* Control, digital I/O line */ +#define ADIS16260_MSC_CTRL 0x34 /* Control, data ready, self-test settings */ +#define ADIS16260_SMPL_PRD 0x36 /* Control, internal sample rate */ +#define ADIS16260_SENS_AVG 0x38 /* Control, dynamic range, filtering */ +#define ADIS16260_SLP_CNT 0x3A /* Control, sleep mode initiation */ +#define ADIS16260_DIAG_STAT 0x3C /* Diagnostic, error flags */ +#define ADIS16260_GLOB_CMD 0x3E /* Control, global commands */ +#define ADIS16260_LOT_ID1 0x52 /* Lot Identification Code 1 */ +#define ADIS16260_LOT_ID2 0x54 /* Lot Identification Code 2 */ +#define ADIS16260_PROD_ID 0x56 /* Product identifier; + * convert to decimal = 16,265/16,260 */ +#define ADIS16260_SERIAL_NUM 0x58 /* Serial number */ + +#define ADIS16260_ERROR_ACTIVE (1<<14) +#define ADIS16260_NEW_DATA (1<<15) + +/* MSC_CTRL */ +#define ADIS16260_MSC_CTRL_MEM_TEST (1<<11) +/* Internal self-test enable */ +#define ADIS16260_MSC_CTRL_INT_SELF_TEST (1<<10) +#define ADIS16260_MSC_CTRL_NEG_SELF_TEST (1<<9) +#define ADIS16260_MSC_CTRL_POS_SELF_TEST (1<<8) +#define ADIS16260_MSC_CTRL_DATA_RDY_EN (1<<2) +#define ADIS16260_MSC_CTRL_DATA_RDY_POL_HIGH (1<<1) +#define ADIS16260_MSC_CTRL_DATA_RDY_DIO2 (1<<0) + +/* SMPL_PRD */ +/* Time base (tB): 0 = 1.953 ms, 1 = 60.54 ms */ +#define ADIS16260_SMPL_PRD_TIME_BASE (1<<7) +#define ADIS16260_SMPL_PRD_DIV_MASK 0x7F + +/* SLP_CNT */ +#define ADIS16260_SLP_CNT_POWER_OFF 0x80 + +/* DIAG_STAT */ +#define ADIS16260_DIAG_STAT_ALARM2 (1<<9) +#define ADIS16260_DIAG_STAT_ALARM1 (1<<8) +#define ADIS16260_DIAG_STAT_FLASH_CHK_BIT 6 +#define ADIS16260_DIAG_STAT_SELF_TEST_BIT 5 +#define ADIS16260_DIAG_STAT_OVERFLOW_BIT 4 +#define ADIS16260_DIAG_STAT_SPI_FAIL_BIT 3 +#define ADIS16260_DIAG_STAT_FLASH_UPT_BIT 2 +#define ADIS16260_DIAG_STAT_POWER_HIGH_BIT 1 +#define ADIS16260_DIAG_STAT_POWER_LOW_BIT 0 + +/* GLOB_CMD */ +#define ADIS16260_GLOB_CMD_SW_RESET (1<<7) +#define ADIS16260_GLOB_CMD_FLASH_UPD (1<<3) +#define ADIS16260_GLOB_CMD_DAC_LATCH (1<<2) +#define ADIS16260_GLOB_CMD_FAC_CALIB (1<<1) +#define ADIS16260_GLOB_CMD_AUTO_NULL (1<<0) + +#define ADIS16260_SPI_SLOW (u32)(300 * 1000) +#define ADIS16260_SPI_BURST (u32)(1000 * 1000) +#define ADIS16260_SPI_FAST (u32)(2000 * 1000) + +/* At the moment triggers are only used for ring buffer + * filling. This may change! + */ + +#define ADIS16260_SCAN_GYRO 0 +#define ADIS16260_SCAN_SUPPLY 1 +#define ADIS16260_SCAN_AUX_ADC 2 +#define ADIS16260_SCAN_TEMP 3 +#define ADIS16260_SCAN_ANGL 4 + +static ssize_t adis16260_read_frequency(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct adis *adis = iio_priv(indio_dev); + int ret, len = 0; + u16 t; + int sps; + ret = adis_read_reg_16(adis, ADIS16260_SMPL_PRD, &t); + if (ret) + return ret; + + if (spi_get_device_id(adis->spi)->driver_data) /* If an adis16251 */ + sps = (t & ADIS16260_SMPL_PRD_TIME_BASE) ? 8 : 256; + else + sps = (t & ADIS16260_SMPL_PRD_TIME_BASE) ? 66 : 2048; + sps /= (t & ADIS16260_SMPL_PRD_DIV_MASK) + 1; + len = sprintf(buf, "%d\n", sps); + return len; +} + +static ssize_t adis16260_write_frequency(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct adis *adis = iio_priv(indio_dev); + unsigned int val; + int ret; + u8 t; + + ret = kstrtouint(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&indio_dev->mlock); + if (spi_get_device_id(adis->spi)->driver_data) + t = 256 / val; + else + t = 2048 / val; + + if (t > ADIS16260_SMPL_PRD_DIV_MASK) + t = ADIS16260_SMPL_PRD_DIV_MASK; + else if (t > 0) + t--; + + if (t >= 0x0A) + adis->spi->max_speed_hz = ADIS16260_SPI_SLOW; + else + adis->spi->max_speed_hz = ADIS16260_SPI_FAST; + ret = adis_write_reg_8(adis, ADIS16260_SMPL_PRD, t); + + mutex_unlock(&indio_dev->mlock); + + return ret ? ret : len; +} + +/* Power down the device */ +static int adis16260_stop_device(struct iio_dev *indio_dev) +{ + struct adis *adis = iio_priv(indio_dev); + int ret; + u16 val = ADIS16260_SLP_CNT_POWER_OFF; + + ret = adis_write_reg_16(adis, ADIS16260_SLP_CNT, val); + if (ret) + dev_err(&indio_dev->dev, "problem with turning device off: SLP_CNT"); + + return ret; +} + +static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, + adis16260_read_frequency, + adis16260_write_frequency); + +static const struct iio_chan_spec adis16260_channels[] = { + ADIS_GYRO_CHAN(X, ADIS16260_GYRO_OUT, ADIS16260_SCAN_GYRO, + BIT(IIO_CHAN_INFO_CALIBBIAS) | + BIT(IIO_CHAN_INFO_CALIBSCALE), 14), + ADIS_INCLI_CHAN(X, ADIS16260_ANGL_OUT, ADIS16260_SCAN_ANGL, 0, 14), + ADIS_TEMP_CHAN(ADIS16260_TEMP_OUT, ADIS16260_SCAN_TEMP, 12), + ADIS_SUPPLY_CHAN(ADIS16260_SUPPLY_OUT, ADIS16260_SCAN_SUPPLY, 12), + ADIS_AUX_ADC_CHAN(ADIS16260_AUX_ADC, ADIS16260_SCAN_AUX_ADC, 12), + IIO_CHAN_SOFT_TIMESTAMP(5), +}; + +static const u8 adis16260_addresses[][2] = { + [ADIS16260_SCAN_GYRO] = { ADIS16260_GYRO_OFF, ADIS16260_GYRO_SCALE }, +}; + +static int adis16260_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct adis *adis = iio_priv(indio_dev); + int ret; + u8 addr; + s16 val16; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return adis_single_conversion(indio_dev, chan, + ADIS16260_ERROR_ACTIVE, val); + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_ANGL_VEL: + *val = 0; + if (spi_get_device_id(adis->spi)->driver_data) { + /* 0.01832 degree / sec */ + *val2 = IIO_DEGREE_TO_RAD(18320); + } else { + /* 0.07326 degree / sec */ + *val2 = IIO_DEGREE_TO_RAD(73260); + } + return IIO_VAL_INT_PLUS_MICRO; + case IIO_INCLI: + *val = 0; + *val2 = IIO_DEGREE_TO_RAD(36630); + return IIO_VAL_INT_PLUS_MICRO; + case IIO_VOLTAGE: + if (chan->channel == 0) { + *val = 1; + *val2 = 831500; /* 1.8315 mV */ + } else { + *val = 0; + *val2 = 610500; /* 610.5 uV */ + } + return IIO_VAL_INT_PLUS_MICRO; + case IIO_TEMP: + *val = 145; + *val2 = 300000; /* 0.1453 C */ + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + break; + case IIO_CHAN_INFO_OFFSET: + *val = 250000 / 1453; /* 25 C = 0x00 */ + return IIO_VAL_INT; + case IIO_CHAN_INFO_CALIBBIAS: + addr = adis16260_addresses[chan->scan_index][0]; + ret = adis_read_reg_16(adis, addr, &val16); + if (ret) + return ret; + + *val = sign_extend32(val16, 11); + return IIO_VAL_INT; + case IIO_CHAN_INFO_CALIBSCALE: + addr = adis16260_addresses[chan->scan_index][1]; + ret = adis_read_reg_16(adis, addr, &val16); + if (ret) + return ret; + + *val = val16; + return IIO_VAL_INT; + } + return -EINVAL; +} + +static int adis16260_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct adis *adis = iio_priv(indio_dev); + u8 addr; + + switch (mask) { + case IIO_CHAN_INFO_CALIBBIAS: + if (val < -2048 || val >= 2048) + return -EINVAL; + + addr = adis16260_addresses[chan->scan_index][0]; + return adis_write_reg_16(adis, addr, val); + case IIO_CHAN_INFO_CALIBSCALE: + if (val < 0 || val >= 4096) + return -EINVAL; + + addr = adis16260_addresses[chan->scan_index][1]; + return adis_write_reg_16(adis, addr, val); + } + return -EINVAL; +} + +static struct attribute *adis16260_attributes[] = { + &iio_dev_attr_sampling_frequency.dev_attr.attr, + NULL +}; + +static const struct attribute_group adis16260_attribute_group = { + .attrs = adis16260_attributes, +}; + +static const struct iio_info adis16260_info = { + .attrs = &adis16260_attribute_group, + .read_raw = &adis16260_read_raw, + .write_raw = &adis16260_write_raw, + .update_scan_mode = adis_update_scan_mode, + .driver_module = THIS_MODULE, +}; + +static const char * const adis1620_status_error_msgs[] = { + [ADIS16260_DIAG_STAT_FLASH_CHK_BIT] = "Flash checksum error", + [ADIS16260_DIAG_STAT_SELF_TEST_BIT] = "Self test error", + [ADIS16260_DIAG_STAT_OVERFLOW_BIT] = "Sensor overrange", + [ADIS16260_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure", + [ADIS16260_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed", + [ADIS16260_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 5.25", + [ADIS16260_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 4.75", +}; + +static const struct adis_data adis16260_data = { + .write_delay = 30, + .read_delay = 30, + .msc_ctrl_reg = ADIS16260_MSC_CTRL, + .glob_cmd_reg = ADIS16260_GLOB_CMD, + .diag_stat_reg = ADIS16260_DIAG_STAT, + + .self_test_mask = ADIS16260_MSC_CTRL_MEM_TEST, + .startup_delay = ADIS16260_STARTUP_DELAY, + + .status_error_msgs = adis1620_status_error_msgs, + .status_error_mask = BIT(ADIS16260_DIAG_STAT_FLASH_CHK_BIT) | + BIT(ADIS16260_DIAG_STAT_SELF_TEST_BIT) | + BIT(ADIS16260_DIAG_STAT_OVERFLOW_BIT) | + BIT(ADIS16260_DIAG_STAT_SPI_FAIL_BIT) | + BIT(ADIS16260_DIAG_STAT_FLASH_UPT_BIT) | + BIT(ADIS16260_DIAG_STAT_POWER_HIGH_BIT) | + BIT(ADIS16260_DIAG_STAT_POWER_LOW_BIT), +}; + +static int adis16260_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct adis *adis; + int ret; + + /* setup the industrialio driver allocated elements */ + indio_dev = iio_device_alloc(sizeof(*adis)); + if (indio_dev == NULL) { + ret = -ENOMEM; + goto error_ret; + } + adis = iio_priv(indio_dev); + /* this is only used for removal purposes */ + spi_set_drvdata(spi, indio_dev); + + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->dev.parent = &spi->dev; + indio_dev->info = &adis16260_info; + indio_dev->channels = adis16260_channels; + indio_dev->num_channels = ARRAY_SIZE(adis16260_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = adis_init(adis, indio_dev, spi, &adis16260_data); + if (ret) + goto error_free_dev; + + ret = adis_setup_buffer_and_trigger(adis, indio_dev, NULL); + if (ret) + goto error_free_dev; + + /* Get the device into a sane initial state */ + ret = adis_initial_startup(adis); + if (ret) + goto error_cleanup_buffer_trigger; + ret = iio_device_register(indio_dev); + if (ret) + goto error_cleanup_buffer_trigger; + + return 0; + +error_cleanup_buffer_trigger: + adis_cleanup_buffer_and_trigger(adis, indio_dev); +error_free_dev: + iio_device_free(indio_dev); +error_ret: + return ret; +} + +static int adis16260_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct adis *adis = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + adis16260_stop_device(indio_dev); + adis_cleanup_buffer_and_trigger(adis, indio_dev); + iio_device_free(indio_dev); + + return 0; +} + +/* + * These parts do not need to be differentiated until someone adds + * support for the on chip filtering. + */ +static const struct spi_device_id adis16260_id[] = { + {"adis16260", 0}, + {"adis16265", 0}, + {"adis16250", 0}, + {"adis16255", 0}, + {"adis16251", 1}, + {} +}; +MODULE_DEVICE_TABLE(spi, adis16260_id); + +static struct spi_driver adis16260_driver = { + .driver = { + .name = "adis16260", + .owner = THIS_MODULE, + }, + .probe = adis16260_probe, + .remove = adis16260_remove, + .id_table = adis16260_id, +}; +module_spi_driver(adis16260_driver); + +MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); +MODULE_DESCRIPTION("Analog Devices ADIS16260/5 Digital Gyroscope Sensor"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/gyro/Kconfig b/drivers/staging/iio/gyro/Kconfig index b4333715536e..88b199bb2926 100644 --- a/drivers/staging/iio/gyro/Kconfig +++ b/drivers/staging/iio/gyro/Kconfig @@ -10,16 +10,4 @@ config ADIS16060 Say yes here to build support for Analog Devices adis16060 wide bandwidth yaw rate gyroscope with SPI. -config ADIS16260 - tristate "Analog Devices ADIS16260 Digital Gyroscope Sensor SPI driver" - depends on SPI - select IIO_ADIS_LIB - select IIO_ADIS_LIB_BUFFER if IIO_BUFFER - help - Say yes here to build support for Analog Devices ADIS16260 ADIS16265 - ADIS16250 ADIS16255 and ADIS16251 programmable digital gyroscope sensors. - - This driver can also be built as a module. If so, the module - will be called adis16260. - endmenu diff --git a/drivers/staging/iio/gyro/Makefile b/drivers/staging/iio/gyro/Makefile index 975f95b141da..cf22d6d55e27 100644 --- a/drivers/staging/iio/gyro/Makefile +++ b/drivers/staging/iio/gyro/Makefile @@ -4,6 +4,3 @@ adis16060-y := adis16060_core.o obj-$(CONFIG_ADIS16060) += adis16060.o - -adis16260-y := adis16260_core.o -obj-$(CONFIG_ADIS16260) += adis16260.o diff --git a/drivers/staging/iio/gyro/adis16260_core.c b/drivers/staging/iio/gyro/adis16260_core.c deleted file mode 100644 index b4cf800717ad..000000000000 --- a/drivers/staging/iio/gyro/adis16260_core.c +++ /dev/null @@ -1,428 +0,0 @@ -/* - * ADIS16260/ADIS16265 Programmable Digital Gyroscope Sensor Driver - * - * Copyright 2010 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <linux/interrupt.h> -#include <linux/mutex.h> -#include <linux/device.h> -#include <linux/kernel.h> -#include <linux/spi/spi.h> -#include <linux/sysfs.h> -#include <linux/module.h> - -#include <linux/iio/iio.h> -#include <linux/iio/sysfs.h> -#include <linux/iio/buffer.h> -#include <linux/iio/imu/adis.h> - -#define ADIS16260_STARTUP_DELAY 220 /* ms */ - -#define ADIS16260_FLASH_CNT 0x00 /* Flash memory write count */ -#define ADIS16260_SUPPLY_OUT 0x02 /* Power supply measurement */ -#define ADIS16260_GYRO_OUT 0x04 /* X-axis gyroscope output */ -#define ADIS16260_AUX_ADC 0x0A /* analog input channel measurement */ -#define ADIS16260_TEMP_OUT 0x0C /* internal temperature measurement */ -#define ADIS16260_ANGL_OUT 0x0E /* angle displacement */ -#define ADIS16260_GYRO_OFF 0x14 /* Calibration, offset/bias adjustment */ -#define ADIS16260_GYRO_SCALE 0x16 /* Calibration, scale adjustment */ -#define ADIS16260_ALM_MAG1 0x20 /* Alarm 1 magnitude/polarity setting */ -#define ADIS16260_ALM_MAG2 0x22 /* Alarm 2 magnitude/polarity setting */ -#define ADIS16260_ALM_SMPL1 0x24 /* Alarm 1 dynamic rate of change setting */ -#define ADIS16260_ALM_SMPL2 0x26 /* Alarm 2 dynamic rate of change setting */ -#define ADIS16260_ALM_CTRL 0x28 /* Alarm control */ -#define ADIS16260_AUX_DAC 0x30 /* Auxiliary DAC data */ -#define ADIS16260_GPIO_CTRL 0x32 /* Control, digital I/O line */ -#define ADIS16260_MSC_CTRL 0x34 /* Control, data ready, self-test settings */ -#define ADIS16260_SMPL_PRD 0x36 /* Control, internal sample rate */ -#define ADIS16260_SENS_AVG 0x38 /* Control, dynamic range, filtering */ -#define ADIS16260_SLP_CNT 0x3A /* Control, sleep mode initiation */ -#define ADIS16260_DIAG_STAT 0x3C /* Diagnostic, error flags */ -#define ADIS16260_GLOB_CMD 0x3E /* Control, global commands */ -#define ADIS16260_LOT_ID1 0x52 /* Lot Identification Code 1 */ -#define ADIS16260_LOT_ID2 0x54 /* Lot Identification Code 2 */ -#define ADIS16260_PROD_ID 0x56 /* Product identifier; - * convert to decimal = 16,265/16,260 */ -#define ADIS16260_SERIAL_NUM 0x58 /* Serial number */ - -#define ADIS16260_ERROR_ACTIVE (1<<14) -#define ADIS16260_NEW_DATA (1<<15) - -/* MSC_CTRL */ -#define ADIS16260_MSC_CTRL_MEM_TEST (1<<11) -/* Internal self-test enable */ -#define ADIS16260_MSC_CTRL_INT_SELF_TEST (1<<10) -#define ADIS16260_MSC_CTRL_NEG_SELF_TEST (1<<9) -#define ADIS16260_MSC_CTRL_POS_SELF_TEST (1<<8) -#define ADIS16260_MSC_CTRL_DATA_RDY_EN (1<<2) -#define ADIS16260_MSC_CTRL_DATA_RDY_POL_HIGH (1<<1) -#define ADIS16260_MSC_CTRL_DATA_RDY_DIO2 (1<<0) - -/* SMPL_PRD */ -/* Time base (tB): 0 = 1.953 ms, 1 = 60.54 ms */ -#define ADIS16260_SMPL_PRD_TIME_BASE (1<<7) -#define ADIS16260_SMPL_PRD_DIV_MASK 0x7F - -/* SLP_CNT */ -#define ADIS16260_SLP_CNT_POWER_OFF 0x80 - -/* DIAG_STAT */ -#define ADIS16260_DIAG_STAT_ALARM2 (1<<9) -#define ADIS16260_DIAG_STAT_ALARM1 (1<<8) -#define ADIS16260_DIAG_STAT_FLASH_CHK_BIT 6 -#define ADIS16260_DIAG_STAT_SELF_TEST_BIT 5 -#define ADIS16260_DIAG_STAT_OVERFLOW_BIT 4 -#define ADIS16260_DIAG_STAT_SPI_FAIL_BIT 3 -#define ADIS16260_DIAG_STAT_FLASH_UPT_BIT 2 -#define ADIS16260_DIAG_STAT_POWER_HIGH_BIT 1 -#define ADIS16260_DIAG_STAT_POWER_LOW_BIT 0 - -/* GLOB_CMD */ -#define ADIS16260_GLOB_CMD_SW_RESET (1<<7) -#define ADIS16260_GLOB_CMD_FLASH_UPD (1<<3) -#define ADIS16260_GLOB_CMD_DAC_LATCH (1<<2) -#define ADIS16260_GLOB_CMD_FAC_CALIB (1<<1) -#define ADIS16260_GLOB_CMD_AUTO_NULL (1<<0) - -#define ADIS16260_SPI_SLOW (u32)(300 * 1000) -#define ADIS16260_SPI_BURST (u32)(1000 * 1000) -#define ADIS16260_SPI_FAST (u32)(2000 * 1000) - -/* At the moment triggers are only used for ring buffer - * filling. This may change! - */ - -#define ADIS16260_SCAN_GYRO 0 -#define ADIS16260_SCAN_SUPPLY 1 -#define ADIS16260_SCAN_AUX_ADC 2 -#define ADIS16260_SCAN_TEMP 3 -#define ADIS16260_SCAN_ANGL 4 - -static ssize_t adis16260_read_frequency(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct adis *adis = iio_priv(indio_dev); - int ret, len = 0; - u16 t; - int sps; - ret = adis_read_reg_16(adis, ADIS16260_SMPL_PRD, &t); - if (ret) - return ret; - - if (spi_get_device_id(adis->spi)->driver_data) /* If an adis16251 */ - sps = (t & ADIS16260_SMPL_PRD_TIME_BASE) ? 8 : 256; - else - sps = (t & ADIS16260_SMPL_PRD_TIME_BASE) ? 66 : 2048; - sps /= (t & ADIS16260_SMPL_PRD_DIV_MASK) + 1; - len = sprintf(buf, "%d\n", sps); - return len; -} - -static ssize_t adis16260_write_frequency(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct adis *adis = iio_priv(indio_dev); - unsigned int val; - int ret; - u8 t; - - ret = kstrtouint(buf, 10, &val); - if (ret) - return ret; - - mutex_lock(&indio_dev->mlock); - if (spi_get_device_id(adis->spi)->driver_data) - t = 256 / val; - else - t = 2048 / val; - - if (t > ADIS16260_SMPL_PRD_DIV_MASK) - t = ADIS16260_SMPL_PRD_DIV_MASK; - else if (t > 0) - t--; - - if (t >= 0x0A) - adis->spi->max_speed_hz = ADIS16260_SPI_SLOW; - else - adis->spi->max_speed_hz = ADIS16260_SPI_FAST; - ret = adis_write_reg_8(adis, ADIS16260_SMPL_PRD, t); - - mutex_unlock(&indio_dev->mlock); - - return ret ? ret : len; -} - -/* Power down the device */ -static int adis16260_stop_device(struct iio_dev *indio_dev) -{ - struct adis *adis = iio_priv(indio_dev); - int ret; - u16 val = ADIS16260_SLP_CNT_POWER_OFF; - - ret = adis_write_reg_16(adis, ADIS16260_SLP_CNT, val); - if (ret) - dev_err(&indio_dev->dev, "problem with turning device off: SLP_CNT"); - - return ret; -} - -static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, - adis16260_read_frequency, - adis16260_write_frequency); - -static const struct iio_chan_spec adis16260_channels[] = { - ADIS_GYRO_CHAN(X, ADIS16260_GYRO_OUT, ADIS16260_SCAN_GYRO, - BIT(IIO_CHAN_INFO_CALIBBIAS) | - BIT(IIO_CHAN_INFO_CALIBSCALE), 14), - ADIS_INCLI_CHAN(X, ADIS16260_ANGL_OUT, ADIS16260_SCAN_ANGL, 0, 14), - ADIS_TEMP_CHAN(ADIS16260_TEMP_OUT, ADIS16260_SCAN_TEMP, 12), - ADIS_SUPPLY_CHAN(ADIS16260_SUPPLY_OUT, ADIS16260_SCAN_SUPPLY, 12), - ADIS_AUX_ADC_CHAN(ADIS16260_AUX_ADC, ADIS16260_SCAN_AUX_ADC, 12), - IIO_CHAN_SOFT_TIMESTAMP(5), -}; - -static const u8 adis16260_addresses[][2] = { - [ADIS16260_SCAN_GYRO] = { ADIS16260_GYRO_OFF, ADIS16260_GYRO_SCALE }, -}; - -static int adis16260_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, int *val2, - long mask) -{ - struct adis *adis = iio_priv(indio_dev); - int ret; - u8 addr; - s16 val16; - - switch (mask) { - case IIO_CHAN_INFO_RAW: - return adis_single_conversion(indio_dev, chan, - ADIS16260_ERROR_ACTIVE, val); - case IIO_CHAN_INFO_SCALE: - switch (chan->type) { - case IIO_ANGL_VEL: - *val = 0; - if (spi_get_device_id(adis->spi)->driver_data) { - /* 0.01832 degree / sec */ - *val2 = IIO_DEGREE_TO_RAD(18320); - } else { - /* 0.07326 degree / sec */ - *val2 = IIO_DEGREE_TO_RAD(73260); - } - return IIO_VAL_INT_PLUS_MICRO; - case IIO_INCLI: - *val = 0; - *val2 = IIO_DEGREE_TO_RAD(36630); - return IIO_VAL_INT_PLUS_MICRO; - case IIO_VOLTAGE: - if (chan->channel == 0) { - *val = 1; - *val2 = 831500; /* 1.8315 mV */ - } else { - *val = 0; - *val2 = 610500; /* 610.5 uV */ - } - return IIO_VAL_INT_PLUS_MICRO; - case IIO_TEMP: - *val = 145; - *val2 = 300000; /* 0.1453 C */ - return IIO_VAL_INT_PLUS_MICRO; - default: - return -EINVAL; - } - break; - case IIO_CHAN_INFO_OFFSET: - *val = 250000 / 1453; /* 25 C = 0x00 */ - return IIO_VAL_INT; - case IIO_CHAN_INFO_CALIBBIAS: - addr = adis16260_addresses[chan->scan_index][0]; - ret = adis_read_reg_16(adis, addr, &val16); - if (ret) - return ret; - - *val = sign_extend32(val16, 11); - return IIO_VAL_INT; - case IIO_CHAN_INFO_CALIBSCALE: - addr = adis16260_addresses[chan->scan_index][1]; - ret = adis_read_reg_16(adis, addr, &val16); - if (ret) - return ret; - - *val = val16; - return IIO_VAL_INT; - } - return -EINVAL; -} - -static int adis16260_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, - int val2, - long mask) -{ - struct adis *adis = iio_priv(indio_dev); - u8 addr; - - switch (mask) { - case IIO_CHAN_INFO_CALIBBIAS: - if (val < -2048 || val >= 2048) - return -EINVAL; - - addr = adis16260_addresses[chan->scan_index][0]; - return adis_write_reg_16(adis, addr, val); - case IIO_CHAN_INFO_CALIBSCALE: - if (val < 0 || val >= 4096) - return -EINVAL; - - addr = adis16260_addresses[chan->scan_index][1]; - return adis_write_reg_16(adis, addr, val); - } - return -EINVAL; -} - -static struct attribute *adis16260_attributes[] = { - &iio_dev_attr_sampling_frequency.dev_attr.attr, - NULL -}; - -static const struct attribute_group adis16260_attribute_group = { - .attrs = adis16260_attributes, -}; - -static const struct iio_info adis16260_info = { - .attrs = &adis16260_attribute_group, - .read_raw = &adis16260_read_raw, - .write_raw = &adis16260_write_raw, - .update_scan_mode = adis_update_scan_mode, - .driver_module = THIS_MODULE, -}; - -static const char * const adis1620_status_error_msgs[] = { - [ADIS16260_DIAG_STAT_FLASH_CHK_BIT] = "Flash checksum error", - [ADIS16260_DIAG_STAT_SELF_TEST_BIT] = "Self test error", - [ADIS16260_DIAG_STAT_OVERFLOW_BIT] = "Sensor overrange", - [ADIS16260_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure", - [ADIS16260_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed", - [ADIS16260_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 5.25", - [ADIS16260_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 4.75", -}; - -static const struct adis_data adis16260_data = { - .write_delay = 30, - .read_delay = 30, - .msc_ctrl_reg = ADIS16260_MSC_CTRL, - .glob_cmd_reg = ADIS16260_GLOB_CMD, - .diag_stat_reg = ADIS16260_DIAG_STAT, - - .self_test_mask = ADIS16260_MSC_CTRL_MEM_TEST, - .startup_delay = ADIS16260_STARTUP_DELAY, - - .status_error_msgs = adis1620_status_error_msgs, - .status_error_mask = BIT(ADIS16260_DIAG_STAT_FLASH_CHK_BIT) | - BIT(ADIS16260_DIAG_STAT_SELF_TEST_BIT) | - BIT(ADIS16260_DIAG_STAT_OVERFLOW_BIT) | - BIT(ADIS16260_DIAG_STAT_SPI_FAIL_BIT) | - BIT(ADIS16260_DIAG_STAT_FLASH_UPT_BIT) | - BIT(ADIS16260_DIAG_STAT_POWER_HIGH_BIT) | - BIT(ADIS16260_DIAG_STAT_POWER_LOW_BIT), -}; - -static int adis16260_probe(struct spi_device *spi) -{ - struct iio_dev *indio_dev; - struct adis *adis; - int ret; - - /* setup the industrialio driver allocated elements */ - indio_dev = iio_device_alloc(sizeof(*adis)); - if (indio_dev == NULL) { - ret = -ENOMEM; - goto error_ret; - } - adis = iio_priv(indio_dev); - /* this is only used for removal purposes */ - spi_set_drvdata(spi, indio_dev); - - indio_dev->name = spi_get_device_id(spi)->name; - indio_dev->dev.parent = &spi->dev; - indio_dev->info = &adis16260_info; - indio_dev->channels = adis16260_channels; - indio_dev->num_channels = ARRAY_SIZE(adis16260_channels); - indio_dev->modes = INDIO_DIRECT_MODE; - - ret = adis_init(adis, indio_dev, spi, &adis16260_data); - if (ret) - goto error_free_dev; - - ret = adis_setup_buffer_and_trigger(adis, indio_dev, NULL); - if (ret) - goto error_free_dev; - - /* Get the device into a sane initial state */ - ret = adis_initial_startup(adis); - if (ret) - goto error_cleanup_buffer_trigger; - ret = iio_device_register(indio_dev); - if (ret) - goto error_cleanup_buffer_trigger; - - return 0; - -error_cleanup_buffer_trigger: - adis_cleanup_buffer_and_trigger(adis, indio_dev); -error_free_dev: - iio_device_free(indio_dev); -error_ret: - return ret; -} - -static int adis16260_remove(struct spi_device *spi) -{ - struct iio_dev *indio_dev = spi_get_drvdata(spi); - struct adis *adis = iio_priv(indio_dev); - - iio_device_unregister(indio_dev); - adis16260_stop_device(indio_dev); - adis_cleanup_buffer_and_trigger(adis, indio_dev); - iio_device_free(indio_dev); - - return 0; -} - -/* - * These parts do not need to be differentiated until someone adds - * support for the on chip filtering. - */ -static const struct spi_device_id adis16260_id[] = { - {"adis16260", 0}, - {"adis16265", 0}, - {"adis16250", 0}, - {"adis16255", 0}, - {"adis16251", 1}, - {} -}; -MODULE_DEVICE_TABLE(spi, adis16260_id); - -static struct spi_driver adis16260_driver = { - .driver = { - .name = "adis16260", - .owner = THIS_MODULE, - }, - .probe = adis16260_probe, - .remove = adis16260_remove, - .id_table = adis16260_id, -}; -module_spi_driver(adis16260_driver); - -MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); -MODULE_DESCRIPTION("Analog Devices ADIS16260/5 Digital Gyroscope Sensor"); -MODULE_LICENSE("GPL v2"); -- cgit v1.2.3