From c95c07836fa4c1767ed11d8eca0769c652760e32 Mon Sep 17 00:00:00 2001 From: yangxingwu Date: Thu, 4 Nov 2021 03:10:29 +0100 Subject: netfilter: ipvs: Fix reuse connection if RS weight is 0 We are changing expire_nodest_conn to work even for reused connections when conn_reuse_mode=0, just as what was done with commit dc7b3eb900aa ("ipvs: Fix reuse connection if real server is dead"). For controlled and persistent connections, the new connection will get the needed real server depending on the rules in ip_vs_check_template(). Fixes: d752c3645717 ("ipvs: allow rescheduling of new connections when port reuse is detected") Co-developed-by: Chuanqi Liu Signed-off-by: Chuanqi Liu Signed-off-by: yangxingwu Acked-by: Simon Horman Acked-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso --- Documentation/networking/ipvs-sysctl.rst | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/ipvs-sysctl.rst b/Documentation/networking/ipvs-sysctl.rst index 95ef56d62077..387fda80f05f 100644 --- a/Documentation/networking/ipvs-sysctl.rst +++ b/Documentation/networking/ipvs-sysctl.rst @@ -37,8 +37,7 @@ conn_reuse_mode - INTEGER 0: disable any special handling on port reuse. The new connection will be delivered to the same real server that was - servicing the previous connection. This will effectively - disable expire_nodest_conn. + servicing the previous connection. bit 1: enable rescheduling of new connections when it is safe. That is, whenever expire_nodest_conn and for TCP sockets, when -- cgit v1.2.3 From aa6fed90fea20bf52215952b276169efab8ae5ad Mon Sep 17 00:00:00 2001 From: Abel Vesa Date: Wed, 10 Nov 2021 19:46:44 +0200 Subject: dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QM compatible matching The i.MX 8QM DTS files use two compatibles, so update the binding to fix dtbs_check warnings like: arch/arm64/boot/dts/freescale/imx8qm-mek.dt.yaml: i2c@5a800000: compatible: ['fsl,imx8qm-lpi2c', 'fsl,imx7ulp-lpi2c'] is too long Signed-off-by: Abel Vesa Acked-by: Rob Herring Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml index 29b9447f3b84..fe0c89edf7c1 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml @@ -17,9 +17,10 @@ properties: oneOf: - enum: - fsl,imx7ulp-lpi2c - - fsl,imx8qm-lpi2c - items: - - const: fsl,imx8qxp-lpi2c + - enum: + - fsl,imx8qxp-lpi2c + - fsl,imx8qm-lpi2c - const: fsl,imx7ulp-lpi2c reg: -- cgit v1.2.3 From bed68f4f4db429a0bf544887e64dc710e5a690ea Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Mon, 15 Nov 2021 12:08:18 +0100 Subject: docs: i2c: smbus-protocol: mention the repeated start condition Sr is a repeated start, it is used in both I2C and SMBus protocols. Provide its description and replace start ("S") conditions with repeated start ("Sr") conditions when relevant. This allows the documentation to match the SMBus specification available at [1]. [1] http://www.smbus.org/specs/SMBus_3_1_20180319.pdf Signed-off-by: Miquel Raynal Signed-off-by: Wolfram Sang --- Documentation/i2c/smbus-protocol.rst | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst index 9e07e6bbe6a3..00d8e17d0aca 100644 --- a/Documentation/i2c/smbus-protocol.rst +++ b/Documentation/i2c/smbus-protocol.rst @@ -36,6 +36,8 @@ Key to symbols =============== ============================================================= S Start condition +Sr Repeated start condition, used to switch from write to + read mode. P Stop condition Rd/Wr (1 bit) Read/Write bit. Rd equals 1, Wr equals 0. A, NA (1 bit) Acknowledge (ACK) and Not Acknowledge (NACK) bit @@ -100,7 +102,7 @@ Implemented by i2c_smbus_read_byte_data() This reads a single byte from a device, from a designated register. The register is specified through the Comm byte:: - S Addr Wr [A] Comm [A] S Addr Rd [A] [Data] NA P + S Addr Wr [A] Comm [A] Sr Addr Rd [A] [Data] NA P Functionality flag: I2C_FUNC_SMBUS_READ_BYTE_DATA @@ -114,7 +116,7 @@ This operation is very like Read Byte; again, data is read from a device, from a designated register that is specified through the Comm byte. But this time, the data is a complete word (16 bits):: - S Addr Wr [A] Comm [A] S Addr Rd [A] [DataLow] A [DataHigh] NA P + S Addr Wr [A] Comm [A] Sr Addr Rd [A] [DataLow] A [DataHigh] NA P Functionality flag: I2C_FUNC_SMBUS_READ_WORD_DATA @@ -164,7 +166,7 @@ This command selects a device register (through the Comm byte), sends 16 bits of data to it, and reads 16 bits of data in return:: S Addr Wr [A] Comm [A] DataLow [A] DataHigh [A] - S Addr Rd [A] [DataLow] A [DataHigh] NA P + Sr Addr Rd [A] [DataLow] A [DataHigh] NA P Functionality flag: I2C_FUNC_SMBUS_PROC_CALL @@ -181,7 +183,7 @@ of data is specified by the device in the Count byte. :: S Addr Wr [A] Comm [A] - S Addr Rd [A] [Count] A [Data] A [Data] A ... A [Data] NA P + Sr Addr Rd [A] [Count] A [Data] A [Data] A ... A [Data] NA P Functionality flag: I2C_FUNC_SMBUS_READ_BLOCK_DATA @@ -212,7 +214,7 @@ This command selects a device register (through the Comm byte), sends 1 to 31 bytes of data to it, and reads 1 to 31 bytes of data in return:: S Addr Wr [A] Comm [A] Count [A] Data [A] ... - S Addr Rd [A] [Count] A [Data] ... A P + Sr Addr Rd [A] [Count] A [Data] ... A P Functionality flag: I2C_FUNC_SMBUS_BLOCK_PROC_CALL @@ -300,7 +302,7 @@ This command reads a block of bytes from a device, from a designated register that is specified through the Comm byte:: S Addr Wr [A] Comm [A] - S Addr Rd [A] [Data] A [Data] A ... A [Data] NA P + Sr Addr Rd [A] [Data] A [Data] A ... A [Data] NA P Functionality flag: I2C_FUNC_SMBUS_READ_I2C_BLOCK -- cgit v1.2.3 From 2d239f0f6ad0cffc4622a6b35d54aa0a123cc764 Mon Sep 17 00:00:00 2001 From: Salvatore Bonaccorso Date: Fri, 19 Nov 2021 22:12:14 +0100 Subject: docs: filesystem: cifs: ksmbd: Fix small layout issues In some senteces there were missing spaces between words. Fix wording in item to show which prints are enabled and add a space beween the cat command and its argument. Cc: Sergey Senozhatsky Cc: Steve French CC: Hyunchul Lee Cc: linux-cifs@vger.kernel.org Acked-by: Namjae Jeon Signed-off-by: Salvatore Bonaccorso Signed-off-by: Steve French --- Documentation/filesystems/cifs/ksmbd.rst | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/cifs/ksmbd.rst b/Documentation/filesystems/cifs/ksmbd.rst index a1326157d53f..b0d354fd8066 100644 --- a/Documentation/filesystems/cifs/ksmbd.rst +++ b/Documentation/filesystems/cifs/ksmbd.rst @@ -50,11 +50,11 @@ ksmbd.mountd (user space daemon) -------------------------------- ksmbd.mountd is userspace process to, transfer user account and password that -are registered using ksmbd.adduser(part of utils for user space). Further it +are registered using ksmbd.adduser (part of utils for user space). Further it allows sharing information parameters that parsed from smb.conf to ksmbd in kernel. For the execution part it has a daemon which is continuously running and connected to the kernel interface using netlink socket, it waits for the -requests(dcerpc and share/user info). It handles RPC calls (at a minimum few +requests (dcerpc and share/user info). It handles RPC calls (at a minimum few dozen) that are most important for file server from NetShareEnum and NetServerGetInfo. Complete DCE/RPC response is prepared from the user space and passed over to the associated kernel thread for the client. @@ -154,11 +154,11 @@ Each layer 1. Enable all component prints # sudo ksmbd.control -d "all" -2. Enable one of components(smb, auth, vfs, oplock, ipc, conn, rdma) +2. Enable one of components (smb, auth, vfs, oplock, ipc, conn, rdma) # sudo ksmbd.control -d "smb" -3. Show what prints are enable. - # cat/sys/class/ksmbd-control/debug +3. Show what prints are enabled. + # cat /sys/class/ksmbd-control/debug [smb] auth vfs oplock ipc conn [rdma] 4. Disable prints: -- cgit v1.2.3 From cbb91dcbfb751f887bfcba790a94c153c5005c19 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Thu, 25 Nov 2021 19:19:21 -0800 Subject: ptp: fix filter names in the documentation All the filter names are missing _PTP in them. Signed-off-by: Jakub Kicinski Acked-by: Richard Cochran Link: https://lore.kernel.org/r/20211126031921.2466944-1-kuba@kernel.org Signed-off-by: Jakub Kicinski --- Documentation/networking/timestamping.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/timestamping.rst b/Documentation/networking/timestamping.rst index a722eb30e014..80b13353254a 100644 --- a/Documentation/networking/timestamping.rst +++ b/Documentation/networking/timestamping.rst @@ -486,8 +486,8 @@ of packets. Drivers are free to use a more permissive configuration than the requested configuration. It is expected that drivers should only implement directly the most generic mode that can be supported. For example if the hardware can -support HWTSTAMP_FILTER_V2_EVENT, then it should generally always upscale -HWTSTAMP_FILTER_V2_L2_SYNC_MESSAGE, and so forth, as HWTSTAMP_FILTER_V2_EVENT +support HWTSTAMP_FILTER_PTP_V2_EVENT, then it should generally always upscale +HWTSTAMP_FILTER_PTP_V2_L2_SYNC, and so forth, as HWTSTAMP_FILTER_PTP_V2_EVENT is more generic (and more useful to applications). A driver which supports hardware time stamping shall update the struct -- cgit v1.2.3 From ddca5b0eba4ef69338cbc210d3fb3332499128f9 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 29 Nov 2021 15:26:43 +0000 Subject: netfs: Adjust docs after foliation Adjust the netfslib docs in light of the foliation changes. Also un-kdoc-mark netfs_skip_folio_read() since it's internal and isn't part of the API. Signed-off-by: David Howells Reviewed-by: Jeff Layton cc: Matthew Wilcox cc: linux-cachefs@redhat.com cc: linux-mm@kvack.org Link: https://lore.kernel.org/r/163706992597.3179783.18360472879717076435.stgit@warthog.procyon.org.uk/ Signed-off-by: Linus Torvalds --- Documentation/filesystems/netfs_library.rst | 95 +++++++++++++++++------------ fs/netfs/read_helper.c | 4 +- 2 files changed, 58 insertions(+), 41 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/netfs_library.rst b/Documentation/filesystems/netfs_library.rst index bb68d39f03b7..375baca7edcd 100644 --- a/Documentation/filesystems/netfs_library.rst +++ b/Documentation/filesystems/netfs_library.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 ================================= -NETWORK FILESYSTEM HELPER LIBRARY +Network Filesystem Helper Library ================================= .. Contents: @@ -37,22 +37,22 @@ into a common call framework. The following services are provided: - * Handles transparent huge pages (THPs). + * Handle folios that span multiple pages. - * Insulates the netfs from VM interface changes. + * Insulate the netfs from VM interface changes. - * Allows the netfs to arbitrarily split reads up into pieces, even ones that - don't match page sizes or page alignments and that may cross pages. + * Allow the netfs to arbitrarily split reads up into pieces, even ones that + don't match folio sizes or folio alignments and that may cross folios. - * Allows the netfs to expand a readahead request in both directions to meet - its needs. + * Allow the netfs to expand a readahead request in both directions to meet its + needs. - * Allows the netfs to partially fulfil a read, which will then be resubmitted. + * Allow the netfs to partially fulfil a read, which will then be resubmitted. - * Handles local caching, allowing cached data and server-read data to be + * Handle local caching, allowing cached data and server-read data to be interleaved for a single request. - * Handles clearing of bufferage that aren't on the server. + * Handle clearing of bufferage that aren't on the server. * Handle retrying of reads that failed, switching reads from the cache to the server as necessary. @@ -70,22 +70,22 @@ Read Helper Functions Three read helpers are provided:: - * void netfs_readahead(struct readahead_control *ractl, - const struct netfs_read_request_ops *ops, - void *netfs_priv);`` - * int netfs_readpage(struct file *file, - struct page *page, - const struct netfs_read_request_ops *ops, - void *netfs_priv); - * int netfs_write_begin(struct file *file, - struct address_space *mapping, - loff_t pos, - unsigned int len, - unsigned int flags, - struct page **_page, - void **_fsdata, - const struct netfs_read_request_ops *ops, - void *netfs_priv); + void netfs_readahead(struct readahead_control *ractl, + const struct netfs_read_request_ops *ops, + void *netfs_priv); + int netfs_readpage(struct file *file, + struct folio *folio, + const struct netfs_read_request_ops *ops, + void *netfs_priv); + int netfs_write_begin(struct file *file, + struct address_space *mapping, + loff_t pos, + unsigned int len, + unsigned int flags, + struct folio **_folio, + void **_fsdata, + const struct netfs_read_request_ops *ops, + void *netfs_priv); Each corresponds to a VM operation, with the addition of a couple of parameters for the use of the read helpers: @@ -103,8 +103,8 @@ Both of these values will be stored into the read request structure. For ->readahead() and ->readpage(), the network filesystem should just jump into the corresponding read helper; whereas for ->write_begin(), it may be a little more complicated as the network filesystem might want to flush -conflicting writes or track dirty data and needs to put the acquired page if an -error occurs after calling the helper. +conflicting writes or track dirty data and needs to put the acquired folio if +an error occurs after calling the helper. The helpers manage the read request, calling back into the network filesystem through the suppplied table of operations. Waits will be performed as @@ -253,7 +253,7 @@ through which it can issue requests and negotiate:: void (*issue_op)(struct netfs_read_subrequest *subreq); bool (*is_still_valid)(struct netfs_read_request *rreq); int (*check_write_begin)(struct file *file, loff_t pos, unsigned len, - struct page *page, void **_fsdata); + struct folio *folio, void **_fsdata); void (*done)(struct netfs_read_request *rreq); void (*cleanup)(struct address_space *mapping, void *netfs_priv); }; @@ -313,13 +313,14 @@ The operations are as follows: There is no return value; the netfs_subreq_terminated() function should be called to indicate whether or not the operation succeeded and how much data - it transferred. The filesystem also should not deal with setting pages + it transferred. The filesystem also should not deal with setting folios uptodate, unlocking them or dropping their refs - the helpers need to deal with this as they have to coordinate with copying to the local cache. - Note that the helpers have the pages locked, but not pinned. It is possible - to use the ITER_XARRAY iov iterator to refer to the range of the inode that - is being operated upon without the need to allocate large bvec tables. + Note that the helpers have the folios locked, but not pinned. It is + possible to use the ITER_XARRAY iov iterator to refer to the range of the + inode that is being operated upon without the need to allocate large bvec + tables. * ``is_still_valid()`` @@ -330,15 +331,15 @@ The operations are as follows: * ``check_write_begin()`` [Optional] This is called from the netfs_write_begin() helper once it has - allocated/grabbed the page to be modified to allow the filesystem to flush + allocated/grabbed the folio to be modified to allow the filesystem to flush conflicting state before allowing it to be modified. - It should return 0 if everything is now fine, -EAGAIN if the page should be + It should return 0 if everything is now fine, -EAGAIN if the folio should be regrabbed and any other error code to abort the operation. * ``done`` - [Optional] This is called after the pages in the request have all been + [Optional] This is called after the folios in the request have all been unlocked (and marked uptodate if applicable). * ``cleanup`` @@ -390,7 +391,7 @@ The read helpers work by the following general procedure: * If NETFS_SREQ_CLEAR_TAIL was set, a short read will be cleared to the end of the slice instead of reissuing. - * Once the data is read, the pages that have been fully read/cleared: + * Once the data is read, the folios that have been fully read/cleared: * Will be marked uptodate. @@ -398,11 +399,11 @@ The read helpers work by the following general procedure: * Unlocked - * Any pages that need writing to the cache will then have DIO writes issued. + * Any folios that need writing to the cache will then have DIO writes issued. * Synchronous operations will wait for reading to be complete. - * Writes to the cache will proceed asynchronously and the pages will have the + * Writes to the cache will proceed asynchronously and the folios will have the PG_fscache mark removed when that completes. * The request structures will be cleaned up when everything has completed. @@ -452,6 +453,9 @@ operation table looks like the following:: netfs_io_terminated_t term_func, void *term_func_priv); + int (*prepare_write)(struct netfs_cache_resources *cres, + loff_t *_start, size_t *_len, loff_t i_size); + int (*write)(struct netfs_cache_resources *cres, loff_t start_pos, struct iov_iter *iter, @@ -509,6 +513,14 @@ The methods defined in the table are: indicating whether the termination is definitely happening in the caller's context. + * ``prepare_write()`` + + [Required] Called to adjust a write to the cache and check that there is + sufficient space in the cache. The start and length values indicate the + size of the write that netfslib is proposing, and this can be adjusted by + the cache to respect DIO boundaries. The file size is passed for + information. + * ``write()`` [Required] Called to write to the cache. The start file offset is given @@ -525,4 +537,9 @@ not the read request structure as they could be used in other situations where there isn't a read request structure as well, such as writing dirty data to the cache. + +API Function Reference +====================== + .. kernel-doc:: include/linux/netfs.h +.. kernel-doc:: fs/netfs/read_helper.c diff --git a/fs/netfs/read_helper.c b/fs/netfs/read_helper.c index 9320a42dfaf9..7046f9bdd8dc 100644 --- a/fs/netfs/read_helper.c +++ b/fs/netfs/read_helper.c @@ -1008,8 +1008,8 @@ out: } EXPORT_SYMBOL(netfs_readpage); -/** - * netfs_skip_folio_read - prep a folio for writing without reading first +/* + * Prepare a folio for writing without reading first * @folio: The folio being prepared * @pos: starting position for the write * @len: length of write -- cgit v1.2.3 From a15b8cd77512fd24920f3a6fe1c85f896fb775e8 Mon Sep 17 00:00:00 2001 From: Tang Yizhou Date: Wed, 1 Dec 2021 15:40:21 +0800 Subject: cpufreq: docs: Update core.rst As the definition of struct cpufreq_freqs has changed, update core.rst with the new first member of struct cpufreq_freqs. Signed-off-by: Tang Yizhou Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- Documentation/cpu-freq/core.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/cpu-freq/core.rst b/Documentation/cpu-freq/core.rst index 33cb90bd1d8f..4ceef8e7217c 100644 --- a/Documentation/cpu-freq/core.rst +++ b/Documentation/cpu-freq/core.rst @@ -73,12 +73,12 @@ CPUFREQ_POSTCHANGE. The third argument is a struct cpufreq_freqs with the following values: -===== =========================== -cpu number of the affected CPU +====== ====================================== +policy a pointer to the struct cpufreq_policy old old frequency new new frequency flags flags of the cpufreq driver -===== =========================== +====== ====================================== 3. CPUFreq Table Generation with Operating Performance Point (OPP) ================================================================== -- cgit v1.2.3 From ce39d473d1edd6914e1eed097deb0c0612baa8f6 Mon Sep 17 00:00:00 2001 From: Kuan-Ying Lee Date: Wed, 1 Dec 2021 11:40:10 +0800 Subject: arm64: update PAC description for kernel Remove the paragraph which has nothing to do with the kernel and add PAC description related to kernel. Suggested-by: Mark Rutland Signed-off-by: Kuan-Ying Lee Link: https://lore.kernel.org/r/20211201034014.20048-1-Kuan-Ying.Lee@mediatek.com Signed-off-by: Will Deacon --- Documentation/arm64/pointer-authentication.rst | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/arm64/pointer-authentication.rst b/Documentation/arm64/pointer-authentication.rst index f127666ea3a8..e5dad2e40aa8 100644 --- a/Documentation/arm64/pointer-authentication.rst +++ b/Documentation/arm64/pointer-authentication.rst @@ -53,11 +53,10 @@ The number of bits that the PAC occupies in a pointer is 55 minus the virtual address size configured by the kernel. For example, with a virtual address size of 48, the PAC is 7 bits wide. -Recent versions of GCC can compile code with APIAKey-based return -address protection when passed the -msign-return-address option. This -uses instructions in the HINT space (unless -march=armv8.3-a or higher -is also passed), and such code can run on systems without the pointer -authentication extension. +When ARM64_PTR_AUTH_KERNEL is selected, the kernel will be compiled +with HINT space pointer authentication instructions protecting +function returns. Kernels built with this option will work on hardware +with or without pointer authentication support. In addition to exec(), keys can also be reinitialized to random values using the PR_PAC_RESET_KEYS prctl. A bitmask of PR_PAC_APIAKEY, -- cgit v1.2.3