From 32abb4788d3fff69fa242c7850e39ec1418df4f4 Mon Sep 17 00:00:00 2001 From: "G.Shark Jeong" Date: Fri, 22 Jun 2012 08:12:06 +0800 Subject: leds: Add LED driver for lm3556 chip LM3556 : The LM3556 is a 4 MHz fixed-frequency synchronous boost converter plus 1.5A constant current driver for a high-current white LED. Datasheet: www.national.com/ds/LM/LM3556.pdf Tested on OMAP4430 (bryan.wu@canonical.com: use module_i2c_driver() rather than lm3556_init/lm3556_exit for code simplicity; fixed some typo pointed out by Rob Landley) Signed-off-by: G.Shark Jeong Reviewed-by: Axel Lin Reviewed-by: Kim, Milo Acked-by: Rob Landley Signed-off-by: Bryan Wu --- Documentation/leds/00-INDEX | 2 + Documentation/leds/leds-lm3556.txt | 85 +++++ drivers/leds/Kconfig | 8 + drivers/leds/Makefile | 1 + drivers/leds/leds-lm3556.c | 512 ++++++++++++++++++++++++++++++ include/linux/platform_data/leds-lm3556.h | 50 +++ 6 files changed, 658 insertions(+) create mode 100644 Documentation/leds/leds-lm3556.txt create mode 100644 drivers/leds/leds-lm3556.c create mode 100644 include/linux/platform_data/leds-lm3556.h diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX index 29f481df32c7..5fefe374892f 100644 --- a/Documentation/leds/00-INDEX +++ b/Documentation/leds/00-INDEX @@ -6,3 +6,5 @@ leds-lp5521.txt - notes on how to use the leds-lp5521 driver. leds-lp5523.txt - notes on how to use the leds-lp5523 driver. +leds-lm3556.txt + - notes on how to use the leds-lm3556 driver. diff --git a/Documentation/leds/leds-lm3556.txt b/Documentation/leds/leds-lm3556.txt new file mode 100644 index 000000000000..d9eb91b51913 --- /dev/null +++ b/Documentation/leds/leds-lm3556.txt @@ -0,0 +1,85 @@ +Kernel driver for lm3556 +======================== + +*Texas Instrument: + 1.5 A Synchronous Boost LED Flash Driver w/ High-Side Current Source +* Datasheet: http://www.national.com/ds/LM/LM3556.pdf + +Authors: + Daniel Jeong + Contact:Daniel Jeong(daniel.jeong-at-ti.com, gshark.jeong-at-gmail.com) + +Description +----------- +There are 3 functions in LM3556, Flash, Torch and Indicator. + +FLASH MODE +In Flash Mode, the LED current source(LED) provides 16 target current levels +from 93.75 mA to 1500 mA.The Flash currents are adjusted via the CURRENT +CONTROL REGISTER(0x09).Flash mode is activated by the ENABLE REGISTER(0x0A), +or by pulling the STROBE pin HIGH. +LM3556 Flash can be controlled through sys/class/leds/flash/brightness file +* if STROBE pin is enabled, below example control brightness only, and +ON / OFF will be controlled by STROBE pin. + +Flash Example: +OFF : #echo 0 > sys/class/leds/flash/brightness +93.75 mA: #echo 1 > sys/class/leds/flash/brightness +... ..... +1500 mA: #echo 16 > sys/class/leds/flash/brightness + +TORCH MODE +In Torch Mode, the current source(LED) is programmed via the CURRENT CONTROL +REGISTER(0x09).Torch Mode is activated by the ENABLE REGISTER(0x0A) or by the +hardware TORCH input. +LM3556 torch can be controlled through sys/class/leds/torch/brightness file. +* if TORCH pin is enabled, below example control brightness only, +and ON / OFF will be controlled by TORCH pin. + +Torch Example: +OFF : #echo 0 > sys/class/leds/torch/brightness +46.88 mA: #echo 1 > sys/class/leds/torch/brightness +... ..... +375 mA : #echo 8 > sys/class/leds/torch/brightness + +INDICATOR MODE +Indicator pattern can be set through sys/class/leds/indicator/pattern file, +and 4 patterns are pre-defined in indicator_pattern array. +According to N-lank, Pulse time and N Period values, different pattern wiill +be generated.If you want new patterns for your own device, change +indicator_pattern array with your own values and INDIC_PATTERN_SIZE. +Please refer datasheet for more detail about N-Blank, Pulse time and N Period. + +Indicator pattern example: +pattern 0: #echo 0 > sys/class/leds/indicator/pattern +.... +pattern 3: #echo 3 > sys/class/leds/indicator/pattern + +Indicator brightness can be controlled through +sys/class/leds/indicator/brightness file. + +Example: +OFF : #echo 0 > sys/class/leds/indicator/brightness +5.86 mA : #echo 1 > sys/class/leds/indicator/brightness +........ +46.875mA : #echo 8 > sys/class/leds/indicator/brightness + +Notes +----- +Driver expects it is registered using the i2c_board_info mechanism. +To register the chip at address 0x63 on specific adapter, set the platform data +according to include/linux/platform_data/leds-lm3556.h, set the i2c board info + +Example: + static struct i2c_board_info __initdata board_i2c_ch4[] = { + { + I2C_BOARD_INFO(LM3556_NAME, 0x63), + .platform_data = &lm3556_pdata, + }, + }; + +and register it in the platform init function + +Example: + board_register_i2c_bus(4, 400, + board_i2c_ch4, ARRAY_SIZE(board_i2c_ch4)); diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 52f1d456f3d2..f028f0348e83 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -415,6 +415,14 @@ config LEDS_MAX8997 This option enables support for on-chip LED drivers on MAXIM MAX8997 PMIC. +config LEDS_LM3556 + tristate "LED support for LM3556 Chip" + depends on LEDS_CLASS && I2C + select REGMAP_I2C + help + This option enables support for LEDs connected to LM3556. + LM3556 includes Torch, Flash and Indicator functions. + config LEDS_OT200 tristate "LED support for the Bachmann OT200" depends on LEDS_CLASS && HAS_IOMEM diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 9112d518f9d4..5eebd7bce4be 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o obj-$(CONFIG_LEDS_RENESAS_TPU) += leds-renesas-tpu.o obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o +obj-$(CONFIG_LEDS_LM3556) += leds-lm3556.o # LED SPI Drivers obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/drivers/leds/leds-lm3556.c b/drivers/leds/leds-lm3556.c new file mode 100644 index 000000000000..3062abd9a532 --- /dev/null +++ b/drivers/leds/leds-lm3556.c @@ -0,0 +1,512 @@ +/* + * Simple driver for Texas Instruments LM3556 LED Flash driver chip (Rev0x03) + * Copyright (C) 2012 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Please refer Documentation/leds/leds-lm3556.txt file. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_FILT_TIME (0x0) +#define REG_IVFM_MODE (0x1) +#define REG_NTC (0x2) +#define REG_INDIC_TIME (0x3) +#define REG_INDIC_BLINK (0x4) +#define REG_INDIC_PERIOD (0x5) +#define REG_TORCH_TIME (0x6) +#define REG_CONF (0x7) +#define REG_FLASH (0x8) +#define REG_I_CTRL (0x9) +#define REG_ENABLE (0xA) +#define REG_FLAG (0xB) +#define REG_MAX (0xB) + +#define IVFM_FILTER_TIME_SHIFT (3) +#define UVLO_EN_SHIFT (7) +#define HYSTERSIS_SHIFT (5) +#define IVM_D_TH_SHIFT (2) +#define IVFM_ADJ_MODE_SHIFT (0) +#define NTC_EVENT_LVL_SHIFT (5) +#define NTC_TRIP_TH_SHIFT (2) +#define NTC_BIAS_I_LVL_SHIFT (0) +#define INDIC_RAMP_UP_TIME_SHIFT (3) +#define INDIC_RAMP_DN_TIME_SHIFT (0) +#define INDIC_N_BLANK_SHIFT (4) +#define INDIC_PULSE_TIME_SHIFT (0) +#define INDIC_N_PERIOD_SHIFT (0) +#define TORCH_RAMP_UP_TIME_SHIFT (3) +#define TORCH_RAMP_DN_TIME_SHIFT (0) +#define STROBE_USUAGE_SHIFT (7) +#define STROBE_PIN_POLARITY_SHIFT (6) +#define TORCH_PIN_POLARITY_SHIFT (5) +#define TX_PIN_POLARITY_SHIFT (4) +#define TX_EVENT_LVL_SHIFT (3) +#define IVFM_EN_SHIFT (2) +#define NTC_MODE_SHIFT (1) +#define INDIC_MODE_SHIFT (0) +#define INDUCTOR_I_LIMIT_SHIFT (6) +#define FLASH_RAMP_TIME_SHIFT (3) +#define FLASH_TOUT_TIME_SHIFT (0) +#define TORCH_I_SHIFT (4) +#define FLASH_I_SHIFT (0) +#define NTC_EN_SHIFT (7) +#define TX_PIN_EN_SHIFT (6) +#define STROBE_PIN_EN_SHIFT (5) +#define TORCH_PIN_EN_SHIFT (4) +#define PRECHG_MODE_EN_SHIFT (3) +#define PASS_MODE_ONLY_EN_SHIFT (2) +#define MODE_BITS_SHIFT (0) + +#define IVFM_FILTER_TIME_MASK (0x3) +#define UVLO_EN_MASK (0x1) +#define HYSTERSIS_MASK (0x3) +#define IVM_D_TH_MASK (0x7) +#define IVFM_ADJ_MODE_MASK (0x3) +#define NTC_EVENT_LVL_MASK (0x1) +#define NTC_TRIP_TH_MASK (0x7) +#define NTC_BIAS_I_LVL_MASK (0x3) +#define INDIC_RAMP_UP_TIME_MASK (0x7) +#define INDIC_RAMP_DN_TIME_MASK (0x7) +#define INDIC_N_BLANK_MASK (0x7) +#define INDIC_PULSE_TIME_MASK (0x7) +#define INDIC_N_PERIOD_MASK (0x7) +#define TORCH_RAMP_UP_TIME_MASK (0x7) +#define TORCH_RAMP_DN_TIME_MASK (0x7) +#define STROBE_USUAGE_MASK (0x1) +#define STROBE_PIN_POLARITY_MASK (0x1) +#define TORCH_PIN_POLARITY_MASK (0x1) +#define TX_PIN_POLARITY_MASK (0x1) +#define TX_EVENT_LVL_MASK (0x1) +#define IVFM_EN_MASK (0x1) +#define NTC_MODE_MASK (0x1) +#define INDIC_MODE_MASK (0x1) +#define INDUCTOR_I_LIMIT_MASK (0x3) +#define FLASH_RAMP_TIME_MASK (0x7) +#define FLASH_TOUT_TIME_MASK (0x7) +#define TORCH_I_MASK (0x7) +#define FLASH_I_MASK (0xF) +#define NTC_EN_MASK (0x1) +#define TX_PIN_EN_MASK (0x1) +#define STROBE_PIN_EN_MASK (0x1) +#define TORCH_PIN_EN_MASK (0x1) +#define PRECHG_MODE_EN_MASK (0x1) +#define PASS_MODE_ONLY_EN_MASK (0x1) +#define MODE_BITS_MASK (0x13) +#define EX_PIN_CONTROL_MASK (0xF1) +#define EX_PIN_ENABLE_MASK (0x70) + +enum lm3556_indic_pulse_time { + PULSE_TIME_0_MS = 0, + PULSE_TIME_32_MS, + PULSE_TIME_64_MS, + PULSE_TIME_92_MS, + PULSE_TIME_128_MS, + PULSE_TIME_160_MS, + PULSE_TIME_196_MS, + PULSE_TIME_224_MS, + PULSE_TIME_256_MS, + PULSE_TIME_288_MS, + PULSE_TIME_320_MS, + PULSE_TIME_352_MS, + PULSE_TIME_384_MS, + PULSE_TIME_416_MS, + PULSE_TIME_448_MS, + PULSE_TIME_480_MS, +}; + +enum lm3556_indic_n_blank { + INDIC_N_BLANK_0 = 0, + INDIC_N_BLANK_1, + INDIC_N_BLANK_2, + INDIC_N_BLANK_3, + INDIC_N_BLANK_4, + INDIC_N_BLANK_5, + INDIC_N_BLANK_6, + INDIC_N_BLANK_7, + INDIC_N_BLANK_8, + INDIC_N_BLANK_9, + INDIC_N_BLANK_10, + INDIC_N_BLANK_11, + INDIC_N_BLANK_12, + INDIC_N_BLANK_13, + INDIC_N_BLANK_14, + INDIC_N_BLANK_15, +}; + +enum lm3556_indic_period { + INDIC_PERIOD_0 = 0, + INDIC_PERIOD_1, + INDIC_PERIOD_2, + INDIC_PERIOD_3, + INDIC_PERIOD_4, + INDIC_PERIOD_5, + INDIC_PERIOD_6, + INDIC_PERIOD_7, +}; + +enum lm3556_mode { + MODES_STASNDBY = 0, + MODES_INDIC, + MODES_TORCH, + MODES_FLASH +}; + +#define INDIC_PATTERN_SIZE 4 + +struct indicator { + u8 blinking; + u8 period_cnt; +}; + +struct lm3556_chip_data { + struct device *dev; + + struct led_classdev cdev_flash; + struct led_classdev cdev_torch; + struct led_classdev cdev_indicator; + + struct lm3556_platform_data *pdata; + struct regmap *regmap; + struct mutex lock; + + unsigned int last_flag; +}; + +/* indicator pattern */ +static struct indicator indicator_pattern[INDIC_PATTERN_SIZE] = { + [0] = {(INDIC_N_BLANK_1 << INDIC_N_BLANK_SHIFT) + | PULSE_TIME_32_MS, INDIC_PERIOD_1}, + [1] = {(INDIC_N_BLANK_15 << INDIC_N_BLANK_SHIFT) + | PULSE_TIME_32_MS, INDIC_PERIOD_2}, + [2] = {(INDIC_N_BLANK_10 << INDIC_N_BLANK_SHIFT) + | PULSE_TIME_32_MS, INDIC_PERIOD_4}, + [3] = {(INDIC_N_BLANK_5 << INDIC_N_BLANK_SHIFT) + | PULSE_TIME_32_MS, INDIC_PERIOD_7}, +}; + +/* chip initialize */ +static int __devinit lm3556_chip_init(struct lm3556_chip_data *chip) +{ + unsigned int reg_val; + int ret; + struct lm3556_platform_data *pdata = chip->pdata; + + /* set config register */ + ret = regmap_read(chip->regmap, REG_CONF, ®_val); + if (ret < 0) { + dev_err(chip->dev, "Failed to read REG_CONF Register\n"); + goto out; + } + + reg_val &= (~EX_PIN_CONTROL_MASK); + reg_val |= ((pdata->torch_pin_polarity & 0x01) + << TORCH_PIN_POLARITY_SHIFT); + reg_val |= ((pdata->strobe_usuage & 0x01) << STROBE_USUAGE_SHIFT); + reg_val |= ((pdata->strobe_pin_polarity & 0x01) + << STROBE_PIN_POLARITY_SHIFT); + reg_val |= ((pdata->tx_pin_polarity & 0x01) << TX_PIN_POLARITY_SHIFT); + reg_val |= ((pdata->indicator_mode & 0x01) << INDIC_MODE_SHIFT); + + ret = regmap_write(chip->regmap, REG_CONF, reg_val); + if (ret < 0) { + dev_err(chip->dev, "Failed to write REG_CONF Regisgter\n"); + goto out; + } + + /* set enable register */ + ret = regmap_read(chip->regmap, REG_ENABLE, ®_val); + if (ret < 0) { + dev_err(chip->dev, "Failed to read REG_ENABLE Register\n"); + goto out; + } + + reg_val &= (~EX_PIN_ENABLE_MASK); + reg_val |= ((pdata->torch_pin_en & 0x01) << TORCH_PIN_EN_SHIFT); + reg_val |= ((pdata->strobe_pin_en & 0x01) << STROBE_PIN_EN_SHIFT); + reg_val |= ((pdata->tx_pin_en & 0x01) << TX_PIN_EN_SHIFT); + + ret = regmap_write(chip->regmap, REG_ENABLE, reg_val); + if (ret < 0) { + dev_err(chip->dev, "Failed to write REG_ENABLE Regisgter\n"); + goto out; + } + +out: + return ret; +} + +/* chip control */ +static int lm3556_control(struct lm3556_chip_data *chip, + u8 brightness, enum lm3556_mode opmode) +{ + int ret; + struct lm3556_platform_data *pdata = chip->pdata; + + ret = regmap_read(chip->regmap, REG_FLAG, &chip->last_flag); + if (ret < 0) { + dev_err(chip->dev, "Failed to read REG_FLAG Register\n"); + goto out; + } + + if (chip->last_flag) + dev_info(chip->dev, "Last FLAG is 0x%x\n", chip->last_flag); + + /* brightness 0 means off-state */ + if (!brightness) + opmode = MODES_STASNDBY; + + switch (opmode) { + case MODES_TORCH: + ret = regmap_update_bits(chip->regmap, REG_I_CTRL, + TORCH_I_MASK << TORCH_I_SHIFT, + (brightness - 1) << TORCH_I_SHIFT); + + if (pdata->torch_pin_en) + opmode |= (TORCH_PIN_EN_MASK << TORCH_PIN_EN_SHIFT); + break; + + case MODES_FLASH: + ret = regmap_update_bits(chip->regmap, REG_I_CTRL, + FLASH_I_MASK << FLASH_I_SHIFT, + (brightness - 1) << FLASH_I_SHIFT); + break; + + case MODES_INDIC: + ret = regmap_update_bits(chip->regmap, REG_I_CTRL, + TORCH_I_MASK << TORCH_I_SHIFT, + (brightness - 1) << TORCH_I_SHIFT); + break; + + case MODES_STASNDBY: + if (pdata->torch_pin_en) + opmode |= (TORCH_PIN_EN_MASK << TORCH_PIN_EN_SHIFT); + break; + + default: + return ret; + } + if (ret < 0) { + dev_err(chip->dev, "Failed to write REG_I_CTRL Register\n"); + goto out; + } + ret = regmap_update_bits(chip->regmap, REG_ENABLE, + MODE_BITS_MASK << MODE_BITS_SHIFT, + opmode << MODE_BITS_SHIFT); + +out: + return ret; +} + +/* torch */ +static void lm3556_torch_brightness_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct lm3556_chip_data *chip = + container_of(cdev, struct lm3556_chip_data, cdev_torch); + + mutex_lock(&chip->lock); + lm3556_control(chip, brightness, MODES_TORCH); + mutex_unlock(&chip->lock); +} + +/* flash */ +static void lm3556_strobe_brightness_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct lm3556_chip_data *chip = + container_of(cdev, struct lm3556_chip_data, cdev_flash); + + mutex_lock(&chip->lock); + lm3556_control(chip, brightness, MODES_FLASH); + mutex_unlock(&chip->lock); +} + +/* indicator */ +static void lm3556_indicator_brightness_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct lm3556_chip_data *chip = + container_of(cdev, struct lm3556_chip_data, cdev_indicator); + + mutex_lock(&chip->lock); + lm3556_control(chip, brightness, MODES_INDIC); + mutex_unlock(&chip->lock); +} + +/* indicator pattern */ +static ssize_t lm3556_indicator_pattern_store(struct device *dev, + struct device_attribute *devAttr, + const char *buf, size_t size) +{ + ssize_t ret; + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lm3556_chip_data *chip = + container_of(led_cdev, struct lm3556_chip_data, cdev_indicator); + unsigned int state; + + ret = kstrtouint(buf, 10, &state); + if (ret) + goto out; + if (state > INDIC_PATTERN_SIZE - 1) + state = INDIC_PATTERN_SIZE - 1; + + ret = regmap_write(chip->regmap, REG_INDIC_BLINK, + indicator_pattern[state].blinking); + if (ret < 0) { + dev_err(chip->dev, "Failed to write REG_ENABLE Regisgter\n"); + goto out; + } + + ret = regmap_write(chip->regmap, REG_INDIC_PERIOD, + indicator_pattern[state].period_cnt); + if (ret < 0) { + dev_err(chip->dev, "Failed to write REG_ENABLE Regisgter\n"); + goto out; + } + + return size; +out: + dev_err(chip->dev, "Indicator pattern doesn't saved\n"); + return size; +} + +static DEVICE_ATTR(pattern, 0666, NULL, lm3556_indicator_pattern_store); + +static const struct regmap_config lm3556_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = REG_MAX, +}; + +/* module initialize */ +static int __devinit lm3556_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lm3556_platform_data *pdata = client->dev.platform_data; + struct lm3556_chip_data *chip; + + int err; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "i2c functionality check fail.\n"); + return -EOPNOTSUPP; + } + + if (pdata == NULL) { + dev_err(&client->dev, "Needs Platform Data.\n"); + return -ENODATA; + } + + chip = + devm_kzalloc(&client->dev, sizeof(struct lm3556_chip_data), + GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->dev = &client->dev; + chip->pdata = pdata; + + chip->regmap = devm_regmap_init_i2c(client, &lm3556_regmap); + if (IS_ERR(chip->regmap)) { + err = PTR_ERR(chip->regmap); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + err); + return err; + } + + mutex_init(&chip->lock); + i2c_set_clientdata(client, chip); + + err = lm3556_chip_init(chip); + if (err < 0) + goto err_out; + + /* flash */ + chip->cdev_flash.name = "flash"; + chip->cdev_flash.max_brightness = 16; + chip->cdev_flash.brightness_set = lm3556_strobe_brightness_set; + err = led_classdev_register((struct device *) + &client->dev, &chip->cdev_flash); + if (err < 0) + goto err_out; + /* torch */ + chip->cdev_torch.name = "torch"; + chip->cdev_torch.max_brightness = 8; + chip->cdev_torch.brightness_set = lm3556_torch_brightness_set; + err = led_classdev_register((struct device *) + &client->dev, &chip->cdev_torch); + if (err < 0) + goto err_create_torch_file; + /* indicator */ + chip->cdev_indicator.name = "indicator"; + chip->cdev_indicator.max_brightness = 8; + chip->cdev_indicator.brightness_set = lm3556_indicator_brightness_set; + err = led_classdev_register((struct device *) + &client->dev, &chip->cdev_indicator); + if (err < 0) + goto err_create_indicator_file; + + err = device_create_file(chip->cdev_indicator.dev, &dev_attr_pattern); + if (err < 0) + goto err_create_pattern_file; + + dev_info(&client->dev, "LM3556 is initialized\n"); + return 0; + +err_create_pattern_file: + led_classdev_unregister(&chip->cdev_indicator); +err_create_indicator_file: + led_classdev_unregister(&chip->cdev_torch); +err_create_torch_file: + led_classdev_unregister(&chip->cdev_flash); +err_out: + return err; +} + +static int __devexit lm3556_remove(struct i2c_client *client) +{ + struct lm3556_chip_data *chip = i2c_get_clientdata(client); + + device_remove_file(chip->cdev_indicator.dev, &dev_attr_pattern); + led_classdev_unregister(&chip->cdev_indicator); + led_classdev_unregister(&chip->cdev_torch); + led_classdev_unregister(&chip->cdev_flash); + regmap_write(chip->regmap, REG_ENABLE, 0); + return 0; +} + +static const struct i2c_device_id lm3556_id[] = { + {LM3556_NAME, 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lm3556_id); + +static struct i2c_driver lm3556_i2c_driver = { + .driver = { + .name = LM3556_NAME, + .owner = THIS_MODULE, + .pm = NULL, + }, + .probe = lm3556_probe, + .remove = __devexit_p(lm3556_remove), + .id_table = lm3556_id, +}; + +module_i2c_driver(lm3556_i2c_driver); + +MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3556"); +MODULE_AUTHOR("Daniel Jeong "); +MODULE_AUTHOR("G.Shark Jeong "); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/platform_data/leds-lm3556.h b/include/linux/platform_data/leds-lm3556.h new file mode 100644 index 000000000000..4b4e7d6b0527 --- /dev/null +++ b/include/linux/platform_data/leds-lm3556.h @@ -0,0 +1,50 @@ +/* + * Simple driver for Texas Instruments LM3556 LED Flash driver chip (Rev0x03) + * Copyright (C) 2012 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __LINUX_LM3556_H +#define __LINUX_LM3556_H + +#define LM3556_NAME "leds-lm3556" + +enum lm3556_pin_polarity { + PIN_LOW_ACTIVE = 0, + PIN_HIGH_ACTIVE, +}; + +enum lm3556_pin_enable { + PIN_DISABLED = 0, + PIN_ENABLED, +}; + +enum lm3556_strobe_usuage { + STROBE_EDGE_DETECT = 0, + STROBE_LEVEL_DETECT, +}; + +enum lm3556_indic_mode { + INDIC_MODE_INTERNAL = 0, + INDIC_MODE_EXTERNAL, +}; + +struct lm3556_platform_data { + enum lm3556_pin_enable torch_pin_en; + enum lm3556_pin_polarity torch_pin_polarity; + + enum lm3556_strobe_usuage strobe_usuage; + enum lm3556_pin_enable strobe_pin_en; + enum lm3556_pin_polarity strobe_pin_polarity; + + enum lm3556_pin_enable tx_pin_en; + enum lm3556_pin_polarity tx_pin_polarity; + + enum lm3556_indic_mode indicator_mode; +}; + +#endif /* __LINUX_LM3556_H */ -- cgit v1.2.3