| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Updated README.
Added config file that contains the minimum required features enabled to
run the tests currently present in the kernel.
This must be updated when new unittests are created and require their own
modules.
Signed-off-by: Keara Leibovitz <kleib@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I ran into the same issue as a009f1f396d0 ("selftests/bpf:
test_sockmap, timing improvements") where I had a broken
pipe error on the socket due to remote end timing out on
select and then shutting down it's sockets while the other
side was still sending. We may need to do a bigger rework
in general on the test_sockmap.c, but for now increase it
to a more suitable timeout.
Fixes: a18fda1a62c3 ("bpf: reduce runtime of test_sockmap tests")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
gre_multipath test was using egress vlan_id matching on flows, for the
purpose of collecting next-hops statistics, later to be compared
against configured weights.
As matching on vlan_id on egress direction is not supported on all HW
devices, change the match criteria to use destination IP.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Acked-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Initial set of nat action unit tests.
Signed-off-by: Keara Leibovitz <kleib@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-08-07
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add cgroup local storage for BPF programs, which provides a fast
accessible memory for storing various per-cgroup data like number
of transmitted packets, etc, from Roman.
2) Support bpf_get_socket_cookie() BPF helper in several more program
types that have a full socket available, from Andrey.
3) Significantly improve the performance of perf events which are
reported from BPF offload. Also convert a couple of BPF AF_XDP
samples overto use libbpf, both from Jakub.
4) seg6local LWT provides the End.DT6 action, which allows to
decapsulate an outer IPv6 header containing a Segment Routing Header.
Adds this action now to the seg6local BPF interface, from Mathieu.
5) Do not mark dst register as unbounded in MOV64 instruction when
both src and dst register are the same, from Arthur.
6) Define u_smp_rmb() and u_smp_wmb() to their respective barrier
instructions on arm64 for the AF_XDP sample code, from Brian.
7) Convert the tcp_client.py and tcp_server.py BPF selftest scripts
over from Python 2 to Python 3, from Jeremy.
8) Enable BTF build flags to the BPF sample code Makefile, from Taeung.
9) Remove an unnecessary rcu_read_lock() in run_lwt_bpf(), from Taehee.
10) Several improvements to the README.rst from the BPF documentation
to make it more consistent with RST format, from Tobin.
11) Replace all occurrences of strerror() by calls to strerror_r()
in libbpf and fix a FORTIFY_SOURCE build error along with it,
from Thomas.
12) Fix a bug in bpftool's get_btf() function to correctly propagate
an error via PTR_ERR(), from Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch changes the tools/lib/bpf/btf.[ch] to LGPL which
is inline with libbpf also.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Match patterns for some skbedit tests contain duplicate whitespace that is
not present in actual tc output. This causes tests to fail because they
can't match required action, even when it was successfully created.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Match patterns for some connmark tests contain duplicate whitespace that is
not present in actual tc output. This causes tests to fail because they
can't match required action, even when it was successfully created.
Fixes: 1dad0f9ffff7 ("tc-testing: add connmark action tests")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 6fb4 creates one mirred and one pipe action, but only flushes mirred
on teardown. Leaking pipe action causes failures in other tests.
Add additional teardown command to also flush gact actions.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix expected ip address to actually match configured ip address.
Fix test to expect single matched filter.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Lots of overlapping changes, mostly trivial in nature.
The mlxsw conflict was resolving using the example
resolution at:
https://github.com/jpirko/linux_mlxsw/blob/combined_queue/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A set of fixes for perf:
Kernel side:
- Fix the hardcoded index of extra PCI devices on Broadwell which
caused a resource conflict and triggered warnings on CPU hotplug.
Tooling:
- Update the tools copy of several files, including perf_event.h,
powerpc's asm/unistd.h (new io_pgetevents syscall), bpf.h and x86's
memcpy_64.s (used in 'perf bench mem'), silencing the respective
warnings during the perf tools build.
- Fix the build on the alpine:edge distro"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix hardcoded index of Broadwell extra PCI devices
perf tools: Fix the build on the alpine:edge distro
tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'
tools headers uapi: Refresh linux/bpf.h copy
tools headers powerpc: Update asm/unistd.h copy to pick new
tools headers uapi: Update tools's copy of linux/perf_event.h
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-08-05
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix bpftool percpu_array dump by using correct roundup to next
multiple of 8 for the value size, from Yonghong.
2) Fix in AF_XDP's __xsk_rcv_zc() to not returning frames back to
allocator since driver will recycle frame anyway in case of an
error, from Jakub.
3) Fix up BPF test_lwt_seg6local test cases to final iproute2
syntax, from Mathieu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The shell file for test_lwt_seg6local contains an early iproute2 syntax
for installing a seg6local End.BPF route. iproute2 support for this
feature has recently been upstreamed, but with an additional keyword
required. This patch updates test_lwt_seg6local.sh to the definitive
iproute2 syntax
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Commit fbeb1603bf4e ("bpf: verifier: MOV64 don't mark dst reg unbounded")
revealed a typo in commit fb30d4b71214 ("bpf: Add tests for map-in-map"):
BPF_MOV64_REG(BPF_REG_0, 0) was used instead of
BPF_MOV64_IMM(BPF_REG_0, 0).
I've noticed the problem by running bpf kselftests.
Fixes: fb30d4b71214 ("bpf: Add tests for map-in-map")
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Arthur Fabre <afabre@cloudflare.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
commit 38d5d3b3d5db ("bpf: Introduce BPF_ANNOTATE_KV_PAIR")
added to the bpf and net trees what
commit 92b57121ca79 ("bpf: btf: export btf types and name by offset from lib")
has already added to bpf-next/net-next, but in slightly different
location. Remove the duplicates (to fix build of libbpf).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement a test to cover the cgroup storage functionality.
The test implements a bpf program which drops every second packet
by using the cgroup storage as a persistent storage.
The test also use the userspace API to check the data
in the cgroup storage, alter it, and check that the loaded
and attached bpf program sees the update.
Expected output:
$ ./test_cgroup_storage
test_cgroup_storage:PASS
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add the following verifier tests to cover the cgroup storage
functionality:
1) valid access to the cgroup storage
2) invalid access: use regular hashmap instead of cgroup storage map
3) invalid access: use invalid map fd
4) invalid access: try access memory after the cgroup storage
5) invalid access: try access memory before the cgroup storage
6) invalid access: call get_local_storage() with non-zero flags
For tests 2)-6) check returned error strings.
Expected output:
$ ./test_verifier
#0/u add+sub+mul OK
#0/p add+sub+mul OK
#1/u DIV32 by 0, zero check 1 OK
...
#280/p valid cgroup storage access OK
#281/p invalid cgroup storage access 1 OK
#282/p invalid cgroup storage access 2 OK
#283/p invalid per-cgroup storage access 3 OK
#284/p invalid cgroup storage access 4 OK
#285/p invalid cgroup storage access 5 OK
...
#649/p pass modified ctx pointer to helper, 2 OK
#650/p pass modified ctx pointer to helper, 3 OK
Summary: 901 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add BPF_MAP_TYPE_CGROUP_STORAGE maps to the list
of maps types which bpftool recognizes.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Sync cgroup storage related changes:
1) new BPF_MAP_TYPE_CGROUP_STORAGE map type
2) struct bpf_cgroup_sotrage_key definition
3) get_local_storage() helper
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The BTF conflicts were simple overlapping changes.
The virtio_net conflict was an overlap of a fix of statistics counter,
happening alongisde a move over to a bonafide statistics structure
rather than counting value on the stack.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
use actual protocol family passed by user rather than hardcoded
AF_INTE6 to cerate sockets.
current code is not working for IPv4.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the scope of a recent intel_pstate driver optimization used
incorrectly on some systems due to processor identification ambiguity
and fix a few issues in the turbostat utility, including three recent
regressions.
Specifics:
- Use ACPI FADT preferred PM Profile to distinguish Skylake desktop
processors from some server ones with the same model number in
order to limit the scope of the recent IO-wait boost optimization
to servers, as intended (Srinivas Pandruvada).
- Fix several issues in the turbostat utility:
* Fix the -S option on 1-CPU systems (Len Brown).
* Fix computations using incorrect processor core counts (Artem
Bityutskiy).
* Fix the x2apic debug message (Len Brown).
* Fix logical node enumeration to allow for non-sequential
physical nodes (Prarit Bhargava).
* Fix reported family on modern AMD processors (Calvin Walton).
* Clarify the RAPL column information in the man page (Len Brown)"
* tag 'pm-urgent-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Limit the scope of HWP dynamic boost platforms
tools/power turbostat: version 18.07.27
tools/power turbostat: Read extended processor family from CPUID
tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes
tools/power turbostat: fix x2apic debug message output file
tools/power turbostat: fix bogus summary values
tools/power turbostat: fix -S on UP systems
tools/power turbostat: Update turbostat(8) RAPL throttling column description
|
|
Verify that with that sysctl turned off, DSCP prioritization and rewrite
works the same way as in qos_dscp_bridge test. However when the sysctl
is charged, there should be a reprioritization after routing stage,
which will be observed by a different DSCP rewrite on egress.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dscp_capture_install() and dscp_capture_uninstall() are going to be
useful for a test added by a following patch, move them therefore to
lib.sh together with related helpers.
While doing so, change the rule preference from mere DSCP value to
DSCP+100 in order to support adding captures of packets with DSCP of 0.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function lldpad_wait() will be useful for a test added by a
following patch. Likewise would the "sleep 5" with its extensive
comment.
Therefore move lldpad_wait() to lib.sh in order to allow reuse. Rename
it to lldpad_app_wait_set() to recognize that what this is intended to
wait on are the pending APP sets.
For the sleeping, add a function lldpad_app_wait_del(). That will serve
to hold the related explanatory comment (which edit for clarity), and as
a token in the caller to identify the sites where this sort of waiting
takes place. That will serve when/if a better way to handle this
business is found.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge turbostat utility fixes for final 4.18:
- Fix the -S option on 1-CPU systems.
- Fix computations using incorrect processor core counts.
- Fix the x2apic debug message.
- Fix logical node enumeration to allow for non-sequential physical nodes.
- Fix reported family on modern AMD processors.
- Clarify the RAPL column information in the man page.
* pm-tools:
tools/power turbostat: version 18.07.27
tools/power turbostat: Read extended processor family from CPUID
tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes
tools/power turbostat: fix x2apic debug message output file
tools/power turbostat: fix bogus summary values
tools/power turbostat: fix -S on UP systems
tools/power turbostat: Update turbostat(8) RAPL throttling column description
|
|
When check_alu_op() handles a BPF_MOV64 between two registers,
it calls check_reg_arg(DST_OP) on the dst register, marking it
as unbounded. If the src and dst register are the same, this
marks the src as unbounded, which can lead to unexpected errors
for further checks that rely on bounds info. For example:
BPF_MOV64_IMM(BPF_REG_2, 0),
BPF_MOV64_REG(BPF_REG_2, BPF_REG_2),
BPF_ALU64_REG(BPF_ADD, BPF_REG_1, BPF_REG_2),
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_EXIT_INSN(),
Results in:
"math between ctx pointer and register with unbounded
min value is not allowed"
check_alu_op() now uses check_reg_arg(DST_OP_NO_MARK), and MOVs
that need to mark the dst register (MOVIMM, MOV32) do so.
Added a test case for MOV64 dst == src, and dst != src.
Signed-off-by: Arthur Fabre <afabre@cloudflare.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Pull virtio fixes from Michael Tsirkin:
"Some bugfixes that seem important and safe enough to merge at the last
minute"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: fix another race between migration and ballooning
tools/virtio: add kmalloc_array stub
tools/virtio: add dma barrier stubs
|
|
Add test to use get_socket_cookie() from BPF programs of types
BPF_PROG_TYPE_SOCK_OPS and BPF_PROG_TYPE_CGROUP_SOCK_ADDR.
The test attaches two programs to cgroup, runs TCP server and client in
the cgroup and checks that two operations are done properly on client
socket when user calls connect(2):
1. In BPF_CGROUP_INET6_CONNECT socket cookie is used as the key to write
new value in a map for client socket.
2. In BPF_CGROUP_SOCK_OPS (BPF_SOCK_OPS_TCP_CONNECT_CB callback) the
value written in "1." is found by socket cookie, since it's the same
socket, and updated.
Finally the test verifies the value in the map.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add missing helper to bpf_helpers.h that is used in tests and samples.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Sync bpf_get_socket_cookie() related bpf UAPI changes to tools/.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Update the tools copy of several files, including perf_event.h,
powerpc's asm/unistd.h (new io_pgetevents syscall), bpf.h and
x86's memcpy_64.s (used in 'perf bench mem'), silencing the
respective warnings during the perf tools build.
- Fix the build on the alpine:edge distro.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull networking fixes from David Miller:
"Several smallish fixes, I don't think any of this requires another -rc
but I'll leave that up to you:
1) Don't leak uninitialzed bytes to userspace in xfrm_user, from Eric
Dumazet.
2) Route leak in xfrm_lookup_route(), from Tommi Rantala.
3) Premature poll() returns in AF_XDP, from Björn Töpel.
4) devlink leak in netdevsim, from Jakub Kicinski.
5) Don't BUG_ON in fib_compute_spec_dst, the condition can
legitimately happen. From Lorenzo Bianconi.
6) Fix some spectre v1 gadgets in generic socket code, from Jeremy
Cline.
7) Don't allow user to bind to out of range multicast groups, from
Dmitry Safonov with a follow-up by Dmitry Safonov.
8) Fix metrics leak in fib6_drop_pcpu_from(), from Sabrina Dubroca"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
netlink: Don't shift with UB on nlk->ngroups
net/ipv6: fix metrics leak
xen-netfront: wait xenbus state change when load module manually
can: ems_usb: Fix memory leak on ems_usb_disconnect()
openvswitch: meter: Fix setting meter id for new entries
netlink: Do not subscribe to non-existent groups
NET: stmmac: align DMA stuff to largest cache line length
tcp_bbr: fix bw probing to raise in-flight data for very small BDPs
net: socket: Fix potential spectre v1 gadget in sock_is_registered
net: socket: fix potential spectre v1 gadget in socketcall
net: mdio-mux: bcm-iproc: fix wrong getter and setter pair
ipv4: remove BUG_ON() from fib_compute_spec_dst
enic: handle mtu change for vf properly
net: lan78xx: fix rx handling before first packet is send
nfp: flower: fix port metadata conversion bug
bpf: use GFP_ATOMIC instead of GFP_KERNEL in bpf_parse_prog()
bpf: fix bpf_skb_load_bytes_relative pkt length check
perf build: Build error in libbpf missing initialization
net: ena: Fix use of uninitialized DMA address bits field
bpf: btf: Use exact btf value_size match in map_check_btf()
...
|
|
Commit 531b014e7a2f ("tools: bpf: make use of reallocarray") causes
a compiler error when building the perf tool in the linux-next tree.
Compile file tools/lib/bpf/libbpf.c on a FEDORA 28 installation with
gcc compiler version: gcc (GCC) 8.0.1 20180324 (Red Hat 8.0.1-0.20)
shows this error message:
[root@p23lp27] # make V=1 EXTRA_CFLAGS="-Wp,-D_FORTIFY_SOURCE=2 -O2"
[...]
make -f /home6/tmricht/linux-next/tools/build/Makefile.build
dir=./util/scripting-engines obj=libperf
libbpf.c: In function ‘bpf_object__elf_collect’:
libbpf.c:811:15: error: ignoring return value of ‘strerror_r’,
declared with attribute warn_unused_result [-Werror=unused-result]
strerror_r(-err, errmsg, sizeof(errmsg));
^
cc1: all warnings being treated as errors
mv: cannot stat './.libbpf.o.tmp': No such file or directory
/home6/tmricht/linux-next/tools/build/Makefile.build:96: recipe for target 'libbpf.o' failed
Replace all occurrences of strerror() by calls to strerror_r(). To
keep the compiler quiet also use the return value from strerror_r()
otherwise a 'variable set but not use' warning which is treated as
error terminates the compile.
Fixes: 531b014e7a2f ("tools: bpf: make use of reallocarray")
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
I hit the following problem when I tried to use bpftool
to dump a percpu array.
$ sudo ./bpftool map show
61: percpu_array name stub flags 0x0
key 4B value 4B max_entries 1 memlock 4096B
...
$ sudo ./bpftool map dump id 61
bpftool: malloc.c:2406: sysmalloc: Assertion
`(old_top == initial_top (av) && old_size == 0) || \
((unsigned long) (old_size) >= MINSIZE && \
prev_inuse (old_top) && \
((unsigned long) old_end & (pagesize - 1)) == 0)'
failed.
Aborted
Further debugging revealed that this is due to
miscommunication between bpftool and kernel.
For example, for the above percpu_array with value size of 4B.
The map info returned to user space has value size of 4B.
In bpftool, the values array for lookup is allocated like:
info->value_size * get_possible_cpus() = 4 * get_possible_cpus()
In kernel (kernel/bpf/syscall.c), the values array size is
rounded up to multiple of 8.
round_up(map->value_size, 8) * num_possible_cpus()
= 8 * num_possible_cpus()
So when kernel copies the values to user buffer, the kernel will
overwrite beyond user buffer boundary.
This patch fixed the issue by allocating and stepping through
percpu map value array properly in bpftool.
Fixes: 71bb428fe2c19 ("tools: bpf: add bpftool")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This tests mirror-to-gretap when an underlay packet path includes a team
device which is not in loadbalance mode, but in LACP mode. The test
manipulates LAG membership to achieve changes in txability, thus making
sure that a driver that offloads mirror-to-gretap doesn't just consider
upness of a device.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test for "tc action mirred egress mirror" that mirrors to gretap when
the underlay route points at a VLAN-aware bridge (802.1q), and the
traffic egresses the bridge through a team device. Test upping and
downing individual team device slaves and verify the traffic flows as
expected.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of relying on "arping" being installed everywhere under that
name, introduce a variable $ARPING like the other tools do.
Convert an existing test, mirror_gre_vlan_bridge_1q.sh to
require_command $ARPING and then invoke arping through the variable.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add team_create() and team_destroy() to manage team netdevices.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The logic for testing whether a certain command is available is used
several times in the current code base. The tests in follow-up patches
add more requirements like that.
Therefore extract the logic into a named function, require_command(),
that can be used directly from lib.sh as well as from any test that
wishes to declare dependence on some command.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The UAPI file byteorder/little_endian.h uses the __always_inline define
without including the header where it is defined, linux/stddef.h, this
ends up working in all the other distros because that file gets included
seemingly by luck from one of the files included from little_endian.h.
But not on Alpine:edge, that fails for all files where perf_event.h is
included but linux/stddef.h isn't include before that.
Adding the missing linux/stddef.h file where it breaks on Alpine:edge to
fix that, in all other distros, that is just a very small header anyway.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-9r1pifftxvuxms8l7ir73p5l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To cope with the changes in:
12c89130a56a ("x86/asm/memcpy_mcsafe: Add write-protection-fault handling")
60622d68227d ("x86/asm/memcpy_mcsafe: Return bytes remaining")
bd131544aa7e ("x86/asm/memcpy_mcsafe: Add labels for __memcpy_mcsafe() write fault handling")
da7bc9c57eb0 ("x86/asm/memcpy_mcsafe: Remove loop unrolling")
This needed introducing a file with a copy of the mcsafe_handle_tail()
function, that is used in the new memcpy_64.S file, as well as a dummy
mcsafe_test.h header.
Testing it:
$ nm ~/bin/perf | grep mcsafe
0000000000484130 T mcsafe_handle_tail
0000000000484300 T __memcpy_mcsafe
$
$ perf bench mem memcpy
# Running 'mem/memcpy' benchmark:
# function 'default' (Default memcpy() provided by glibc)
# Copying 1MB bytes ...
44.389205 GB/sec
# function 'x86-64-unrolled' (unrolled memcpy() in arch/x86/lib/memcpy_64.S)
# Copying 1MB bytes ...
22.710756 GB/sec
# function 'x86-64-movsq' (movsq-based memcpy() in arch/x86/lib/memcpy_64.S)
# Copying 1MB bytes ...
42.459239 GB/sec
# function 'x86-64-movsb' (movsb-based memcpy() in arch/x86/lib/memcpy_64.S)
# Copying 1MB bytes ...
42.459239 GB/sec
$
This silences this perf tools build warning:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-igdpciheradk3gb3qqal52d0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
4c79579b44b1 ("bpf: Change bpf_fib_lookup to return lookup status")
That do not entail changes in tools/perf/ use of it, elliminating the
following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-yei494y6b3mn6bjzz9g0ws12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The new 'io_pgetevents' syscall was wired up in PowerPC in the following
cset:
b2f82565f2ca ("powerpc: Wire up io_pgetevents")
Update tools/arch/powerpc/ copy of the asm/unistd.h file so that 'perf
trace' on PowerPC gets it in its syscall table.
This elliminated the following perf build warning:
Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/unistd.h' differs from latest version at 'arch/powerpc/include/uapi/asm/unistd.h'
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/n/tip-9uvu7tz4ud3bxxfyxwryuz47@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
6cbc304f2f36 ("perf/x86/intel: Fix unwind errors from PEBS entries (mk-II)")
That do not imply any changes in the tooling side, the (ab)use of
sample_type is entirely done in kernel space, nothing for userspace to
witness here.
This cures the following warning during perf's build:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-o64mjoy35s9gd1gitunw1zg4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There are two problems in this test case:
- When indexing in bash associative array, the subscript is interpreted as
string, not as a variable name to be expanded.
- The keys stored to t0s and t1s are not DSCP values, but priority +
base (i.e. the logical DSCP value, not the full bitfield value).
In combination these two bugs conspire to make the test just work,
except it doesn't really test anything and always passes.
Fix the above two problems in obvious manner.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As Ido's suggestion, this patch is to add a selftest for directed
broadcast forwarding with vrf. It does the assertion by checking
the src IP of the echo-reply packet in ping_test_from.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
