| Age | Commit message (Collapse) | Author |
|---|
|
The adr is u64.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250204033134.92332-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
in PTL platform
This change adds an entry for fatcat boards in soundwire quirk table
and also, enables BT offload for PTL RVP.
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250204053943.93596-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Asus laptops with sound PCI subsystem ID 1043:1e13 have the DMICs
connected to the host instead of the CS42L43 so need the
SOC_SDW_CODEC_MIC quirk.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250204053943.93596-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add lookup of PCI subsystem vendor:device ID to find a quirk.
The subsystem ID (SSID) is part of the PCI specification to uniquely
identify a particular system-specific implementation of a hardware
device.
Unlike DMI information, it identifies the sound hardware itself, rather
than a specific model of PC. SSID can be more reliable and stable than
DMI strings, and is preferred by some vendors as the way to identify
the actual sound hardware.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250204053943.93596-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If 'micfil->quality' received from micfil_quality_set() somehow ends
up with an unpredictable value, switch() operator will fail to
initialize local variable qsel before regmap_update_bits() tries
to utilize it.
While it is unlikely, play it safe and enable a default case that
returns -EINVAL error.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: bea1d61d5892 ("ASoC: fsl_micfil: rework quality setting")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250116142436.22389-1-n.zhandarovich@fintech.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here is a collection of fixes that have been gathered since the
previous pull request.
All about device-specific fixes and quirks, and most of them are
pretty small and trivial"
* tag 'sound-fix-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: hda/realtek: Workaround for resume on Dell Venue 11 Pro 7130
ALSA: hda: Fix headset detection failure due to unstable sort
ALSA: pcm: use new array-copying-wrapper
ASoC: codec: es8316: "DAC Soft Ramp Rate" is just a 2 bit control
ASoC: amd: acp: Fix possible deadlock
firmware: cs_dsp: FW_CS_DSP_KUNIT_TEST should not select REGMAP
ALSA: usb-audio: Add delay quirk for iBasso DC07 Pro
ALSA: hda/realtek: Fix quirk matching for Legion Pro 7
ASoC: renesas: SND_SIU_MIGOR should depend on DMADEVICES
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet 5V
ASoC: da7213: Initialize the mutex
ASoC: use to_platform_device() instead of container_of()
ASoC: acp: Support microphone from Lenovo Go S
ASoC: SOF: imx8m: Add entry for new 8M Plus revision
ASoC: SOF: imx8: Add entries for new 8QM and 8QXP revisions
ASoC: SOF: imx: Add mach entry to select cs42888 topology
dt-bindings: arm: imx: Add board revisions for i.MX8MP, i.MX8QM and i.MX8QXP
ASoC: fsl_asrc_m2m: select CONFIG_DMA_SHARED_BUFFER
ASoC: audio-graph-card2: use correct endpoint when getting link parameters
ASoC: SOF: imx8m: add SAI2,5,6,7
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.14
A bunch of fixes that came in during the merge window, plus a few new
device IDs. The i.MX changes are a little large since they add some new
quirk data as well as device IDs, and the audio graph card change for
picking the correct endpoint for links is large due to updating a number
of call sites.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
|
|
Max value should be 3, otherwise "DAC Soft Ramp Switch" will be
overwritten by this control.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Link: https://patch.msgid.link/20250127150458.1489425-1-megi@xff.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On error path, function acp_i2s_set_tdm_slot returns without releasing
the lock and this could result in potential deadlocks in the future.
Error reported by sparse:
sound/soc/amd/acp/acp-i2s.c:95:12: error: context imbalance in
'acp_i2s_set_tdm_slot' - different lock contexts for basic block
Fixes: cd60dec8994c ("ASoC: amd: acp: Refactor TDM slots selction based on acp revision id")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250127083422.20406-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This was a relatively calm cycle, and most of changes are rather small
device-specific fixes. Here are highlights:
Core:
- Further enhancements of ALSA rawmidi and sequencer APIs for MIDI
2.0
- compress-offload API extensions for ASRC support
ASoC:
- Allow clocking on each DAI in an audio graph card to be configured
separately
- Improved power management for Renesas RZ-SSI
- KUnit testing for the Cirrus DSP framework
- Memory to meory operation support for Freescale/NXP platforms
- Support for pause operations in SOF
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
HD- and USB-audio:
- Add support for Focusrite Scarlett 4th Gen 16i16, 18i16, and 18i20
interfaces via new FCP driver
- TAS2781 SPI HD-audio sub-codec support
- Various device-specific quirks as usual"
* tag 'sound-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (235 commits)
ALSA: hda: tas2781-spi: Fix bogus error handling in tas2781_hda_spi_probe()
ALSA: hda: tas2781-spi: Fix error code in tas2781_read_acpi()
ALSA: hda: tas2781-spi: Delete some dead code
ALSA: usb: fcp: Fix return code from poll ops
ALSA: usb: fcp: Fix incorrect resp->opcode retrieval
ALSA: usb: fcp: Fix meter_levels type to __le32
ALSA: hda/realtek: Enable Mute LED on HP Laptop 14s-fq1xxx
ALSA: hda: tas2781-spi: Fix -Wsometimes-uninitialized in tasdevice_spi_switch_book()
ALSA: ctxfi: Simplify dao_clear_{left,right}_input() functions
ALSA: hda: tas2781-spi: select CRC32 instead of CRC32_SARWATE
ALSA: usb: fcp: Fix hwdep read ops types
ALSA: scarlett2: Add device_setup option to use FCP driver
ALSA: FCP: Add Focusrite Control Protocol driver
ALSA: hda/tas2781: Add tas2781 hda SPI driver
ALSA: hda/realtek - Fixed headphone distorted sound on Acer Aspire A115-31 laptop
ASoC: xilinx: xlnx_spdif: Simpify using devm_clk_get_enabled()
ALSA: hda: Support for Ideapad hotkey mute LEDs
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83JX, 83MC and 83NM
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83LC
ASoC: dapm: add support for preparing streams
...
|
|
If CONFIG_DMADEVICES=n:
WARNING: unmet direct dependencies detected for SND_SOC_SH4_SIU
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && (SUPERH [=y] || ARCH_RENESAS || COMPILE_TEST [=n]) && ARCH_SHMOBILE [=y] && HAVE_CLK [=y] && DMADEVICES [=n]
Selected by [y]:
- SND_SIU_MIGOR [=y] && SOUND [=y] && SND [=y] && SND_SOC [=y] && (SUPERH [=y] || ARCH_RENESAS || COMPILE_TEST [=n]) && SH_MIGOR [=y] && I2C [=y]
SND_SIU_MIGOR selects SND_SOC_SH4_SIU. As the latter depends on
DMADEVICES, the former should depend on DMADEVICES, too.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501241032.oOmsmzvk-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/8c17ff52584ce824b8b42d08ea1b942ebeb7f4d9.1737708688.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Daniel Baluta <daniel.baluta@nxp.com>:
We introduce SOF support for new board revisions for i.MX8MP/QM/QXP
which wrt audio they replace wm8960 codec with wm8962.
Also add support for cs42888 codec on i.MX8QM/8QXP baseboard.
|
|
The Vexia EDU ATLA 10 tablet comes in 2 different versions with
significantly different mainboards. The only outward difference is that
the charging barrel on one is marked 5V and the other is marked 9V.
The 5V version mostly works with the BYTCR defaults, except that it is
missing a CHAN package in its ACPI tables and the default of using
SSP0-AIF2 is wrong, instead SSP0-AIF1 must be used. That and its jack
detect signal is not inverted as it usually is.
Add a DMI quirk for the 5V version to fix sound not working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20250123132507.18434-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Initialize the struct da7213_priv::ctrl_lock mutex. Without it the
following stack trace is displayed when rebooting and lockdep is enabled:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 0 PID: 180 at kernel/locking/mutex.c:564 __mutex_lock+0x254/0x4e4
CPU: 0 UID: 0 PID: 180 Comm: alsactl Not tainted 6.13.0-next-20250123-arm64-renesas-00002-g132083a22d3d #30
Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __mutex_lock+0x254/0x4e4
lr : __mutex_lock+0x254/0x4e4
sp : ffff800082c13c00
x29: ffff800082c13c00 x28: ffff00001002b500 x27: 0000000000000000
x26: 0000000000000000 x25: ffff800080b30db4 x24: 0000000000000002
x23: ffff800082c13c70 x22: 0000ffffc2a68a70 x21: ffff000010348000
x20: 0000000000000000 x19: ffff00000be2e488 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 00000000000003c1 x13: 00000000000003c1 x12: 0000000000000000
x11: 0000000000000011 x10: 0000000000001420 x9 : ffff800082c13a70
x8 : 0000000000000001 x7 : ffff800082c13a50 x6 : ffff800082c139e0
x5 : ffff800082c14000 x4 : ffff800082c13a50 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00001002b500
Call trace:
__mutex_lock+0x254/0x4e4 (P)
mutex_lock_nested+0x20/0x28
da7213_volsw_locked_get+0x34/0x60
snd_ctl_elem_read+0xbc/0x114
snd_ctl_ioctl+0x878/0xa70
__arm64_sys_ioctl+0x94/0xc8
invoke_syscall+0x44/0x104
el0_svc_common.constprop.0+0xb4/0xd4
do_el0_svc+0x18/0x20
el0_svc+0x3c/0xf0
el0t_64_sync_handler+0xc0/0xc4
el0t_64_sync+0x154/0x158
irq event stamp: 7713
hardirqs last enabled at (7713): [<ffff800080170d94>] ktime_get_coarse_real_ts64+0xf0/0x10c
hardirqs last disabled at (7712): [<ffff800080170d58>] ktime_get_coarse_real_ts64+0xb4/0x10c
softirqs last enabled at (7550): [<ffff8000800179d4>] fpsimd_restore_current_state+0x30/0xb8
softirqs last disabled at (7548): [<ffff8000800179a8>] fpsimd_restore_current_state+0x4/0xb8
---[ end trace 0000000000000000 ]---
Fixes: 64c3259b5f86 ("ASoC: da7213: Add new kcontrol for tonegen")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20250123121036.70406-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the to_platform_device() macro where possible.
Signed-off-by: Luoxi Li <lee.lockhey@gmail.com>
Link: https://patch.msgid.link/20250123033937.3587880-1-lee.lockhey@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On Lenovo Go S there is a DMIC connected to the ACP but the firmware
has no `AcpDmicConnected` ACPI _DSD.
Add a DMI entry for all possible Lenovo Go S SKUs to enable DMIC.
Cc: nijs1@lenovo.com
Cc: pgriffais@valvesoftware.com
Cc: mpearson-lenovo@squebb.ca
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250123024915.2457115-1-superm1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The new revision for 8M Plus has wm8962 codec instead of wm8960.
Therefore add new entry in sof_imx8mp_machs, an array of snd_sof_of_mach,
where we describe topology name and driver name.
For the new revision we have new compatible value and based on this,
we select the new topology file, for wm8962 codec.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://patch.msgid.link/20250122163544.1392869-5-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The new revisions for 8QM and 8QXP have wm8962 codec instead of wm8960.
Therefore add new entries in sof_imx8_machs, an array of snd_sof_of_mach,
where we describe topology name and driver name.
For the new revisions we have new compatible values and based on these,
we select the new topology file, for wm8962 codec.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250122163544.1392869-4-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit 2b9cdef13648 ("ASoC: SOF: imx: Add devicetree support
to select topologies") we select topology to be used by the board
compatible string in the dts.
Now that we have a way to know when the baseboard is installed, use
the board compatible and select proper topology files when the cs42888
Audio IO card is used.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250122163544.1392869-3-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Randconfig builds without dmabuf result in this link error from
the fasl-asrc driver:
ERROR: modpost: "dma_buf_put" [sound/core/snd-compress.ko] undefined!
ERROR: modpost: "dma_buf_export" [sound/soc/fsl/snd-soc-fsl-asrc.ko] undefined!
Add the missing 'select' statement.
Fixes: 24a01710f627 ("ASoC: fsl_asrc_m2m: Add memory to memory function")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250122065330.1423248-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When link DT nodes are parsed, most functions get port as a parameter,
which results in port endpoint@0 always being used. However, each endpoint
might have different settings, but those are currently ignored.
Fix that by passing endpoint instead of port when parsing link parameters.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20250121064815.741820-1-ivo.g.dimitrov.75@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Added the remaining SAIs in addition to SAI1 and SAI3. There is no SAI4.
Signed-off-by: Alexander Boehm <aboehm@eurofunk.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://patch.msgid.link/20250122082928.1321536-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull drm updates from Dave Airlie:
"There are two external interactions of note, the msm tree pull in some
opp tree, hopefully the opp tree arrives from the same git tree
however it normally does.
There is also a new cgroup controller for device memory, that is used
by drm, so is merging through my tree. This will hopefully help open
up gpu cgroup usage a bit more and move us forward.
There is a new accelerator driver for the AMD XDNA Ryzen AI NPUs.
Then the usual xe/amdgpu/i915/msm leaders and lots of changes and
refactors across the board:
core:
- device memory cgroup controller added
- Remove driver date from drm_driver
- Add drm_printer based hex dumper
- drm memory stats docs update
- scheduler documentation improvements
new driver:
- amdxdna - Ryzen AI NPU support
connector:
- add a mutex to protect ELD
- make connector setup two-step
panels:
- Introduce backlight quirks infrastructure
- New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00,
- Multi-Inno Technology MI1010Z1T-1CP11
bridge:
- ti-sn65dsi83: Add ti,lvds-vod-swing optional properties
- Provide default implementation of atomic_check for HDMI bridges
- it605: HDCP improvements, MCCS Support
xe:
- make OA buffer size configurable
- GuC capture fixes
- add ufence and g2h flushes
- restore system memory GGTT mappings
- ioctl fixes
- SRIOV PF scheduling priority
- allow fault injection
- lots of improvements/refactors
- Enable GuC's WA_DUAL_QUEUE for newer platforms
- IRQ related fixes and improvements
i915:
- More accurate engine busyness metrics with GuC submission
- Ensure partial BO segment offset never exceeds allowed max
- Flush GuC CT receive tasklet during reset preparation
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs
- Fix DG1 power gate sequence
- Enabling uncompressed 128b/132b UHBR SST
- Handle hdmi connector init failures, and no HDMI/DP cases
- More robust engine resets on Haswell and older
i915/xe display:
- HDCP fixes for Xe3Lpd
- New GSC FW ARL-H/ARL-U
- support 3 VDSC engines 12 slices
- MBUS joining sanitisation
- reconcile i915/xe display power mgmt
- Xe3Lpd fixes
- UHBR rates for Thunderbolt
amdgpu:
- DRM panic support
- track BO memory stats at runtime
- Fix max surface handling in DC
- Cleaner shader support for gfx10.3 dGPUs
- fix drm buddy trim handling
- SDMA engine reset updates
- Fix doorbell ttm cleanup
- RAS updates
- ISP updates
- SDMA queue reset support
- Rework DPM powergating interfaces
- Documentation updates and cleanups
- DCN 3.5 updates
- Use a pm notifier to more gracefully handle VRAM eviction on
suspend or hibernate
- Add debugfs interfaces for forcing scheduling to specific engine
instances
- GG 9.5 updates
- IH 4.4 updates
- Make missing optional firmware less noisy
- PSP 13.x updates
- SMU 13.x updates
- VCN 5.x updates
- JPEG 5.x updates
- GC 12.x updates
- DC FAMS updates
amdkfd:
- GG 9.5 updates
- Logging improvements
- Shader debugger fixes
- Trap handler cleanup
- Cleanup includes
- Eviction fence wq fix
msm:
- MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
- DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two
SSPPs for a single plane)
- added CWB hardware blocks support
- DSI:
- added SM6150 (aka QCS615) support
- GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
rcar-du:
- Add r8a779h0 Support
ivpu:
- Fix qemu crash when using passthrough
nouveau:
- expose GSP-RM logging buffers via debugfs
panfrost:
- Add MT8188 Mali-G57 MC3 support
rockchip:
- Gamma LUT support
hisilicon:
- new HIBMC support
virtio-gpu:
- convert to helpers
- add prime support for scanout buffers
v3d:
- Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
vc4:
- Add support for BCM2712
vkms:
- line-per-line compositing algorithm to improve performance
zynqmp:
- Add DP audio support
mediatek:
- dp: Add sdp path reset
- dp: Support flexible length of DP calibration data
etnaviv:
- add fdinfo memory support
- add explicit reset handling"
* tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (1070 commits)
drm/bridge: fix documentation for the hdmi_audio_prepare() callback
doc/cgroup: Fix title underline length
drm/doc: Include new drm-compute documentation
cgroup/dmem: Fix parameters documentation
cgroup/dmem: Select PAGE_COUNTER
kernel/cgroup: Remove the unused variable climit
drm/display: hdmi: Do not read EDID on disconnected connectors
drm/tests: hdmi: Add connector disablement test
drm/connector: hdmi: Do atomic check when necessary
drm/amd/display: 3.2.316
drm/amd/display: avoid reset DTBCLK at clock init
drm/amd/display: improve dpia pre-train
drm/amd/display: Apply DML21 Patches
drm/amd/display: Use HW lock mgr for PSR1
drm/amd/display: Revised for Replay Pseudo vblank control
drm/amd/display: Add a new flag for replay low hz
drm/amd/display: Remove unused read_ono_state function from Hwss module
drm/amd/display: Do not elevate mem_type change to full update
drm/amd/display: Do not wait for PSR disable on vbl enable
drm/amd/display: Remove unnecessary eDP power down
...
|
|
In commit
9e2ab4b18ebd ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates"),
the set_sysclk callback was removed as considered unused as the mclk rate
can be set in the hw_params callback.
The difference between hw_params and set_sysclk is that the former is
called with the audio sampling rate set in the params (e.g.: 48000 Hz)
while the latter is called with a clock rate already computed with
sampling_rate * mclk-fs (e.g.: 48000 * 256)
For HDMI audio using the Rockchip I2S TDM driver, the mclk-fs value must
be set to 128 instead of the default 256, and that value is set in the
device tree at the machine driver level (like a simple-audio-card
compatible node).
Therefore, the i2s_tdm driver has no idea that another mclk-fs value can
be configured and simply computes the mclk rate in the hw_params callback
with DEFAULT_MCLK_FS * params_rate(params), which is wrong for HDMI
audio.
Re-add the set_sysclk callback so that the mclk rate is computed by the
machine driver which has the correct mclk-fs value set in its device tree
node.
Fixes: 9e2ab4b18ebd ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates")
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://patch.msgid.link/20250117163102.65807-1-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
1. Fix the suspend failure for memory to peripheral function.
2. Return error value for processing function.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.14
This was quite a quiet release for what I imagine are holiday related
reasons, the diffstat is dominated by some Cirrus Logic Kunit tests.
There's the usual mix of small improvements and fixes, plus a few new
drivers and features. The diffstat includes some DRM changes due to
work on HDMI audio.
- Allow clocking on each DAI in an audio graph card to be configured
separately.
- Improved power management for Renesas RZ-SSI.
- KUnit testing for the Cirrus DSP framework.
- Memory to meory operation support for Freescale/NXP platforms.
- Support for pause operations in SOF.
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
|
|
Modified configuration to improve PSSR when ES8326 is working
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20250120101758.13347-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The asrc_m2m_device_run() function is the main process function
of converting, the error need to be returned to user, that user
can handle error case properly.
Fixes: 24a01710f627 ("ASoC: fsl_asrc_m2m: Add memory to memory function")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250120081938.2501554-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASRC memory to memory cases and memory to peripheral cases are
sharing the same pair pools, the pairs got for m2m suspend
function may be used for memory to peripheral, which is handled
memory to peripheral driver and can't be handled in
memory to memory suspend function.
Use the "pair->dma_buffer" as a flag for memory to memory case,
when it is allocated, handle the suspend operation for the related
pairs.
Fixes: 24a01710f627 ("ASoC: fsl_asrc_m2m: Add memory to memory function")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250120081938.2501554-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull pending ASoC and HD-audio fixes for 6.14-rc1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Clock handling can be very simlified with using devm_clk_get_enabled() as
was done by commit 8d2aaf4382b7 ("gpio: zynq: Simplify using
devm_clk_get_enabled()").
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/90075f57ceff7cdf958d0d146f46f50661335236.1737039345.git.michal.simek@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Those laptops use host DMIC. Correct the DMI match entries.
|
|
Update the DMI match for a Lenovo laptop to a new DMI identifier.
This laptop ships with a different DMI identifier to what was expected
and now has three match entries. It also has the DMICs connected to the
host rather than the cs42l43 codec.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Fixes: 83c062ae81e8 ("ASoC: Intel: sof_sdw: Add quirks for some new Lenovo laptops")
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250102123335.256698-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update the DMI match for a Lenovo laptop to the new DMI identifier.
This laptop ships with a different DMI identifier to what was expected,
and also has the DMICs connected to the host rather than the cs42l43
codec.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Fixes: 83c062ae81e8 ("ASoC: Intel: sof_sdw: Add quirks for some new Lenovo laptops")
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250102123335.256698-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Codec driver can implement .hw_params and/or .prepare from struct
snd_soc_dai_ops. For codec-to-codec links only the former (.hw_params)
callback has been called.
On platforms like Amlogic Meson8/8b/8m2 the SoC's sound card
(sound/soc/meson/gx-card.c) uses a codec-to-codec link for the HDMI
codec output because further digital routing is required after the
backend. The new DRM HDMI (audio) codec framework (which internally
uses sound/soc/codecs/hdmi-codec.c) relies on the .prepare callback
of the hdmi-codec to be called. Implement calls to
snd_soc_dai_prepare() so the .prepare callback is called. In this
case the mandatory part is the call to prepare the sink (which is
the hdmi-codec on those platforms). Also call snd_soc_dai_prepare()
for the source to stay consistent with the rest of the code (even
though it's not strictly necessary to make the DRM HDMI codec
framework work on Amlogic Meson8/8b/8m2).
For platforms or sound cards without a codec-to-codec link with
additional parameters (which applies to most hardware) this changes
nothing as the .prepare callback is already called via
snd_pcm_do_prepare() (as well as dpcm_fe_dai_prepare() and
dpcm_be_dai_prepare()) on those.
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20250114215617.336105-3-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new snd_soc_dai_prepare() which can be used (in an upcoming patch)
by soc-dapm.c. Use this new function internally in
snd_soc_pcm_dai_prepare() to avoid duplicating code.
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20250114215617.336105-2-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As of commit cb18cd26039f ("ASoC: soc-core: do rtd->id trick at
snd_soc_add_pcm_runtime()") the ID stored in the PCM runtime data can
no longer be safely used to index the priv->dai_props array. This is
because the ID may be modified during snd_soc_add_pcm_runtime(), thus
resulting in an ID that's no longer a valid array index.
To fix this, use the position of the dai_link stored inside the PCM
runtime data relative to the start of the dai_link array as index into
the priv->dai_props array.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20250114184314.3583-2-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20250112080705.141166-16-viro@zeniv.linux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Hopefully the last PR for 6.13. This became bigger than wished due to
the timing after holiday breaks.
The only large LOC is the additional document for Cirrus codec which
is nice for users (and absolutely safe). All the rest are small fixes
in ASoC Rcar and codecs as well as HD-audio quirks (And no fix for USB
guitar pedals seen yet :)"
* tag 'sound-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix volume adjustment issue on Lenovo ThinkBook 16P Gen5
ALSA: hda/realtek: fixup ASUS H7606W
ALSA: hda/realtek: fixup ASUS GA605W
ALSA: hda/realtek: Add support for Ayaneo System using CS35L41 HDA
ASoC: rsnd: check rsnd_adg_clk_enable() return value
ASoC: cs42l43: Add codec force suspend/resume ops
ALSA: doc: Add codecs/index.rst to top-level index
ALSA: doc: cs35l56: Add information about Cirrus Logic CS35L54/56/57
ASoC: samsung: Add missing depends on I2C
MAINTAINERS: add missing maintainers for Simple Audio Card
ASoC: samsung: Add missing selects for MFD_WM8994
ASoC: codecs: es8316: Fix HW rate calculation for 48Mhz MCLK
ASoC: wm8994: Add depends on MFD core
ASoC: tas2781: Fix occasional calibration failture
ASoC: codecs: ES8326: Adjust ANA_MICBIAS to reduce pop noise
|
|
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
On i.MX943, the FIFO data address is changed and the bit width
of CICOSR is changed.
Add a new compatible string and update driver for these changes.
|
|
Clean up error handling by using the new devm_
clock and reset functions. This should make it
easier to add new code, as we can eliminate the
"goto ladder" in probe().
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250114095909.798559-1-csokas.bence@prolan.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dapm is setup by snd_soc_dapm_init(), thus dapm->card never been NULL.
We don't need if (!card) check for it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/877c6ytd9t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On i.MX943, the FIFO data address is changed to 0x20~0x3c,
compared to previous version, there is a minus 4 offset,
so add a new regmap configuration for it.
And the bit width of CICOSR is changed to 5 bits, from bit
16th to 20th in REG_MICFIL_CTRL2 register, so update its
definition header file.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250114102720.3664667-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Current clock provider/consumer setting is set by dai_link->dai_fmt, and it
is Codec base on Sound Card driver (= SND_SOC_DAIFMT_CBx_CFx).
Current CPU/Codec drivers are already based on its own base
(= SND_SOC_DAIFMT_Bx_Fx). So, Codec clock setting uses dai_link->dai_fmt
as-is, and CPU side clock setting is created from Codec base setting by
flipping. Because of this, we can't set both CPU/Codec clock consumer for
example.
To solve this issue, this patch-set adds new ext_fmt on each DAI.
It can keep compatible with legacy style.
1. SND_SOC_DAIFMT_FORMAT_MASK
2. SND_SOC_DAIFMT_CLOCK
3. SND_SOC_DAIFMT_INV
4. SND_SOC_DAIFMT_CLOCK_PROVIDER
dai_fmt : dai_link->dai_fmt = common settings
ext_fmt : each DAI settings
Legacy
dai_fmt includes 1, 2, 3, 4
New style
dai_fmt includes 1, 2, 3
ext_fmt includes 4
Audio-Graph-Card2 will use this new style by this patch-set.
By this patch, Card2 default behavior (= no "clock-master / frame-master"
settings on DT) will be changed, but no drivers are using it.
In case of no DAI has "clock-master / frame-master" property on DT,
it will be...
Legacy
CPU : provider (because flipped from Codec)
Codec: consumer
New style
CPU : consumer
Codec: consumer
One note is that Simple-Card, Audio-Graph-Card don't implement
this new style to keep compatiblily.
In Overlay case, port order can be random, so we shouldn't use get_next()
function to get next port.
|
|
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
There are two MQS instances on the i.MX943 platform.
The definition of bit positions in the control register are
different. In order to support these MQS modules, define
two compatible strings to distinguish them.
|
|
Use the ARRAY_SIZE() macro to calculate PEB2466_TLV_SIZE and improve the
code's readability.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20250113001001.400669-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove hard-coded strings by using the str_yes_no() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250107110900.3716-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current ASoC is using dai_link->dai_fmt to set DAI format for both
CPU/Codec. But because it is using same settings, and
SND_SOC_DAIFMT_CLOCK_PROVIDER is flipped for CPU, we can't set both
CPU/Codec as clock consumer, for example.
To solve this issue, this patch uses extra format for each DAI which can
keep compatibility with legacy system,
1. SND_SOC_DAIFMT_FORMAT_MASK
2. SND_SOC_DAIFMT_CLOCK
3. SND_SOC_DAIFMT_INV
4. SND_SOC_DAIFMT_CLOCK_PROVIDER
Legacy
dai_fmt includes 1, 2, 3, 4
New idea
dai_fmt includes 1, 2, 3
ext_fmt includes 4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87pll0o5j6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current ASoC is using dai_link->dai_fmt to set DAI format for both
CPU/Codec. But because it is using same settings, and
SND_SOC_DAIFMT_CLOCK_PROVIDER is flipped for CPU, we can't set both
CPU/Codec as clock consumer, for example.
To solve this issue, this patch enable to use extra format for each
DAI which can keep compatibility with legacy system,
1. SND_SOC_DAIFMT_FORMAT_MASK
2. SND_SOC_DAIFMT_CLOCK
3. SND_SOC_DAIFMT_INV
4. SND_SOC_DAIFMT_CLOCK_PROVIDER
Legacy
dai_fmt includes 1, 2, 3, 4
New idea
dai_fmt includes 1, 2, 3
ext_fmt includes 4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87r05go5ja.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
