| Age | Commit message (Collapse) | Author |
|---|
|
When building for an embedded target using Yocto, we're sometimes
observing that the version string that gets built into vmlinux (and
thus what uname -a reports) differs from the path under /lib/modules/
where modules get installed in the rootfs, but only in the length of
the -gabc123def suffix. Hence modprobe always fails.
The problem is that Yocto has the concept of "sstate" (shared state),
which allows different developers/buildbots/etc. to share build
artifacts, based on a hash of all the metadata that went into building
that artifact - and that metadata includes all dependencies (e.g. the
compiler used etc.). That normally works quite well; usually a clean
build (without using any sstate cache) done by one developer ends up
being binary identical to a build done on another host. However, one
thing that can cause two developers to end up with different builds
[and thus make one's vmlinux package incompatible with the other's
kernel-dev package], which is not captured by the metadata hashing, is
this `git describe`: The output of that can be affected by
(1) git version: before 2.11 git defaulted to a minimum of 7, since
2.11 (git.git commit e6c587) the default is dynamic based on the
number of objects in the repo
(2) hence even if both run the same git version, the output can differ
based on how many remotes are being tracked (or just lots of local
development branches or plain old garbage)
(3) and of course somebody could have a core.abbrev config setting in
~/.gitconfig
So in order to avoid `uname -a` output relying on such random details
of the build environment which are rather hard to ensure are
consistent between developers and buildbots, make sure the abbreviated
sha1 always consists of exactly 12 hex characters. That is consistent
with the current rule for -stable patches, and is almost always enough
to identify the head commit unambigously - in the few cases where it
does not, the v5.4.3-00021- prefix would certainly nail it down.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
PowerPC allmodconfig often fails to build as follows:
LD .tmp_vmlinux.kallsyms1
KSYM .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
KSYM .tmp_vmlinux.kallsyms2.o
LD .tmp_vmlinux.kallsyms3
KSYM .tmp_vmlinux.kallsyms3.o
LD vmlinux
SORTTAB vmlinux
SYSMAP System.map
Inconsistent kallsyms data
Try make KALLSYMS_EXTRA_PASS=1 as a workaround
make[2]: *** [../Makefile:1162: vmlinux] Error 1
Setting KALLSYMS_EXTRA_PASS=1 does not help.
This is caused by the compiler inserting stubs such as *.long_branch.*
and *.plt_branch.*
$ powerpc-linux-nm -n .tmp_vmlinux.kallsyms2
[ snip ]
c00000000210c010 t 00000075.plt_branch.da9:19
c00000000210c020 t 00000075.plt_branch.1677:5
c00000000210c030 t 00000075.long_branch.memmove
c00000000210c034 t 00000075.plt_branch.9e0:5
c00000000210c044 t 00000075.plt_branch.free_initrd_mem
...
Actually, the problem mentioned in scripts/link-vmlinux.sh comments;
"In theory it's possible this results in even more stubs, but unlikely"
is happening here, and ends up with another kallsyms step required.
scripts/kallsyms.c already ignores various compiler stubs. Let's do
similar to make kallsysms for PowerPC always succeed in 2 steps.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
|
|
'scripts/kconfig/qconf -h' just calls usage() and exits, with
QApplication unused.
There is no need to construct QApplication so early. Do it after
the parse stage.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
|
|
There are so many ways to toggle bool / tristate options.
I do not know how useful these columns are.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Now that ConfigView only contains ConfigList, we can remove ConfigView
and just use ConfigList.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
ConfigView::setShowName/Range() only get access to the 'list' member.
Move them to the more relevant ConfigList class.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Now that "int", "hex", "string" menus are edited in-place, this class
is no longer needed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Previously, when you double-clicked the "int", "hex", or "string" menus,
a line-edit gadget showed up to allow you to input the value, which
looked clumsy.
Also, it was buggy; the editor opened even if the config option was not
editable. For example, just try to double-click CC_VERSION_TEXT, which
has no prompt.
This commit sub-classes QStyleItemDelegate to allow users to edit
"int", "hex", "string" menus in-place. Just double-click (or press
the F2 key) in the data column. Then, an editor widget is placed on
top of the item view.
The two methods are overridden:
createEditor - process only when the data column is being accessed
and the menu is visible. Otherwise, return nullptr to disallow editing.
setModelData - take the new data from the editor, and set it to the
addressed symbol. If it was successful, update all the list windows.
Otherwise, (the reason for the failure is possibly the input data was
out of range), set the old value back to the editor.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The next commit will allow users to edit "int", "hex", "string"
menus in-place from the data column.
The data column should be always displayed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
ConfigView::updateList() iterates over all views, and then calls
updateList() against for its ConfigList instance.
This means there is no point to implement it in the ConfigView class.
Move and rename as follows:
ConfigView::updateList() -> ConfigList::updateListForAll()
ConfigView::updateListAll() -> ConfigList::updateListAllForAll()
I used QList to contain all ConfigList instances.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit 76538660fb08 ("Port xconfig to Qt5 - Remove custom
ListView classes.") removed the original implementation, where
ConfigItem::okRename() overrode Q3ListViewItem::okRename().
Commit 59e564408f88 ("Port xconfig to Qt5 - Put back some of the
old implementation.") restored the empty stub, but it seems
useless.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
I do not think "Although there is no cross reference yet ..." is valid
any longer.
The cross reference is supported via hyperlinks enabled by the
"show Debug Info" option.
Update the message.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
|
|
The introduction message displayed by 'Help -> Introduction' does not
look nice due to excessive new lines.
Reformat the message.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
|
|
Move CFLAGS_KASAN*, CFLAGS_UBSAN, CFLAGS_KCSAN to Makefile.kasan,
Makefile.ubsan, Makefile.kcsan, respectively.
This commit also avoids the same -fsanitize=* flags being added to
CFLAGS_UBSAN multiple times.
Prior to this commit, the ubsan flags were appended by the '+='
operator, without any initialization. Some build targets such as
'make bindeb-pkg' recurses to the top Makefile, and ended up with
adding the same flags to CFLAGS_UBSAN twice.
Clear CFLAGS_UBSAN with ':=' to make it a simply expanded variable.
This is better than a recursively expanded variable, which evaluates
$(call cc-option, ...) multiple times before Kbuild starts descending
to subdirectories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Marco Elver <elver@google.com>
|
|
Since commit e0fe0bbe57b8 ("kbuild: include scripts/Makefile.* only
when relevant CONFIG is enabled"), this file is included only when
CONFIG_KASAN=y.
This ifdef is redundant.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Marco Elver <elver@google.com>
|
|
There was a request to preprocess the module linker script like we
do for the vmlinux one. (https://lkml.org/lkml/2020/8/21/512)
The difference between vmlinux.lds and module.lds is that the latter
is needed for external module builds, thus must be cleaned up by
'make mrproper' instead of 'make clean'. Also, it must be created
by 'make modules_prepare'.
You cannot put it in arch/$(SRCARCH)/kernel/, which is cleaned up by
'make clean'. I moved arch/$(SRCARCH)/kernel/module.lds to
arch/$(SRCARCH)/include/asm/module.lds.h, which is included from
scripts/module.lds.S.
scripts/module.lds is fine because 'make clean' keeps all the
build artifacts under scripts/.
You can add arch-specific sections in <asm/module.lds.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-09-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 95 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 4211 insertions(+), 2040 deletions(-).
The main changes are:
1) Full multi function support in libbpf, from Andrii.
2) Refactoring of function argument checks, from Lorenz.
3) Make bpf_tail_call compatible with functions (subprograms), from Maciej.
4) Program metadata support, from YiFei.
5) bpf iterator optimizations, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently all the resolve_btfids 'users' are under CONFIG_BPF
code, so if we have CONFIG_BPF disabled, resolve_btfids will
fail, because there's no data to resolve.
Disabling resolve_btfids if there's CONFIG_BPF disabled,
so we won't fail such builds.
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200923185735.3048198-1-jolsa@kernel.org
|
|
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dictionaries are only used for SUBSYSTEM and DEVICE properties. The
current implementation stores the property names each time they are
used. This requires more space than otherwise necessary. Also,
because the dictionary entries are currently considered optional,
it cannot be relied upon that they are always available, even if the
writer wanted to store them. These issues will increase should new
dictionary properties be introduced.
Rather than storing the subsystem and device properties in the
dict ring, introduce a struct dev_printk_info with separate fields
to store only the property values. Embed this struct within the
struct printk_info to provide guaranteed availability.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87mu1jl6ne.fsf@jogness.linutronix.de
|
|
Check for !A || A && B condition. It's equivalent to !A || B.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
Since commit 68fd110b3e7e ("kconfig: qconf: remove redundant help in
the info view"), the help message is no longer displayed.
I intended to drop duplicated "Symbol:", "Type:", but precious info
about help and reverse dependencies was lost too.
Revive it now.
"defined at" is contained in menu_get_ext_help(), so I made sure
to not display it twice.
Fixes: 68fd110b3e7e ("kconfig: qconf: remove redundant help in the info view")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
"make HOSTCXX=clang++ xconfig" reports the following:
HOSTCXX scripts/kconfig/qconf.o
In file included from scripts/kconfig/qconf.cc:23:
In file included from scripts/kconfig/lkc.h:15:
scripts/kconfig/lkc_proto.h:26:13: warning: 'get_relations_str' has C-linkage specified, but returns incomplete type 'struct gstr' which could be incompatible with C [-Wreturn-type-c-linkage]
struct gstr get_relations_str(struct symbol **sym_arr, struct list_head *head);
^
Currently, get_relations_str() is declared before the struct gstr
definition.
Move all declarations of menu.c functions below.
BTW, some are declared in lkc.h and some in lkc_proto.h, but the
difference is unclear. I guess some refactoring is needed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Boris Kolpackov <boris@codesynthesis.com>
|
|
Commit c9b09a9249e6 ("kconfig: qconf: use delete[] instead of delete
to free array") fixed two lines, but there is one more.
(cppcheck does not report it for some reason...)
This was detected by Clang.
"make HOSTCXX=clang++ xconfig" reports the following:
scripts/kconfig/qconf.cc:1279:2: warning: 'delete' applied to a pointer that was allocated with 'new[]'; did you mean 'delete[]'? [-Wmismatched-new-delete]
delete data;
^
[]
scripts/kconfig/qconf.cc:1239:15: note: allocated with 'new[]' here
char *data = new char[count + 1];
^
Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again")
Fixes: c9b09a9249e6 ("kconfig: qconf: use delete[] instead of delete to free array")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Subroutine dump_struct uses type attributes to check if the struct
syntax is valid. Then, it removes all attributes before using it for
output. `____cacheline_aligned` is an attribute that is
not included in both steps. Add it, since it is used by kernel structs.
Based on previous patch to add ____cacheline_aligned_in_smp.
Motivated by patches to reorder this attribute to before the
variable name. Whilst we could do that in all cases, that would
be a massive change and it is more common in the kernel to place
this particular attribute after the variable name. A quick grep
suggests approximately 400 instances of which 341 have this
attribute just before a semicolon and hence after the variable name.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200910185415.653139-1-jic23@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add support for extending the newest data block. For this, introduce
a new finalization state (desc_finalized) denoting a committed
descriptor that cannot be extended.
Until a record is finalized, a writer can reopen that record to
append new data. Reopening a record means transitioning from the
desc_committed state back to the desc_reserved state.
A writer can explicitly finalize a record if there is no intention
of extending it. Also, records are automatically finalized when a
new record is reserved. This relieves writers of needing to
explicitly finalize while also making such records available to
readers sooner. (Readers can only traverse finalized records.)
Four new memory barrier pairs are introduced. Two of them are
insignificant additions (data_realloc:A/desc_read:D and
data_realloc:A/data_push_tail:B) because they are alternate path
memory barriers that exactly match the purpose, pairing, and
context of the two existing memory barrier pairs they provide an
alternate path for. The other two new memory barrier pairs are
significant additions:
desc_reopen_last:A / _prb_commit:B - When reopening a descriptor,
ensure the state transitions back to desc_reserved before
fully trusting the descriptor data.
_prb_commit:B / desc_reserve:D - When committing a descriptor,
ensure the state transitions to desc_committed before checking
the head ID to see if the descriptor needs to be finalized.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-6-john.ogness@linutronix.de
|
|
Rather than deriving the state by evaluating bits within the flags
area of the state variable, assign the states explicit values and
set those values in the flags area. Introduce macros to make it
simple to read and write state values for the state variable.
Although the functionality is preserved, the binary representation
for the states is changed.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-5-john.ogness@linutronix.de
|
|
We need the driver core changes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, coccicheck fails with only the message "coccicheck failed"
and the error code for the failure. To obtain the error logs,
one needs to specify a debug file using the DEBUG_FILE option.
Modify coccicheck to display error logs when it crashes unless
DEBUG_FILE is set, in which case, the error logs are stored in
the specified debug file.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are a number of small driver fixes for 5.9-rc5
Included in here are:
- habanalabs driver fixes
- interconnect driver fixes
- soundwire driver fixes
- dyndbg fixes for reported issues, and then reverts to fix it all up
to a sane state.
- phy driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Revert "dyndbg: accept query terms like file=bar and module=foo"
Revert "dyndbg: fix problem parsing format="foo bar""
scripts/tags.sh: exclude tools directory from tags generation
video: fbdev: fix OOB read in vga_8planes_imageblit()
dyndbg: fix problem parsing format="foo bar"
dyndbg: refine export, rename to dynamic_debug_exec_queries()
dyndbg: give %3u width in pr-format, cosmetic only
interconnect: qcom: Fix small BW votes being truncated to zero
soundwire: fix double free of dangling pointer
interconnect: Show bandwidth for disabled paths as zero in debugfs
habanalabs: fix report of RAZWI initiator coordinates
habanalabs: prevent user buff overflow
phy: omap-usb2-phy: disable PHY charger detect
phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init
soundwire: bus: fix typo in comment on INTSTAT registers
phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe()
phy: qualcomm: fix platform_no_drv_owner.cocci warnings
|
|
Commit 453431a54934 ("mm, treewide: rename kzfree() to kfree_sensitive()")
renames kzfree to kfree_sensitive and uses memzero_explicit(...) instead of
memset(..., 0, ...) internally. Update cocci script to reflect these
changes.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
sysfs.txt was converted and renamed to sysfs.rst.
Update device_attr_show.cocci script accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/048ed24b09aefa0051d76396d6250e35e6ba035c.1599660067.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This should solve bad error reports like this one:
./include/linux/iio/iio.h:0: WARNING: Unknown target name: "devm".
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/56eed0ba50cd726236acd12b11b55ce54854c5ea.1599660067.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
With the introduction of the lockless printk ringbuffer, the data
structure for the kernel log buffer was changed. Update the gdb
scripts to be able to parse/print the new log buffer structure.
Fixes: 896fbe20b4e2333fb55 ("printk: use the lockless ringbuffer")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Petr Mladek <pmladek@suse.com>
[akpm@linux-foundation.org: A typo fix.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200814212525.6118-3-john.ogness@linutronix.de
|
|
Add a function for reading unsigned long values, which vary in size
depending on the architecture.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200814212525.6118-2-john.ogness@linutronix.de
|
|
when COMPILED_SOURCE is set, running 'make ARCH=x86_64 COMPILED_SOURCE=1
cscope tags' in KBUILD_OUTPUT directory produces lots of "No such file
or directory" warnings:
...
realpath: sigchain.h: No such file or directory
realpath: orc_gen.c: No such file or directory
realpath: objtool.c: No such file or directory
...
let's exclude tools directory from tags generation
Fixes: 4f491bb6ea2a ("scripts/tags.sh: collect compiled source precisely")
Link: https://lore.kernel.org/lkml/20200809210056.GA1344537@thinkpad
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Link: https://lore.kernel.org/r/20200810153650.1822316-1-rkovhaev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge misc fixes from Andrew Morton:
"19 patches.
Subsystems affected by this patch series: MAINTAINERS, ipc, fork,
checkpatch, lib, and mm (memcg, slub, pagemap, madvise, migration,
hugetlb)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
include/linux/log2.h: add missing () around n in roundup_pow_of_two()
mm/khugepaged.c: fix khugepaged's request size in collapse_file
mm/hugetlb: fix a race between hugetlb sysctl handlers
mm/hugetlb: try preferred node first when alloc gigantic page from cma
mm/migrate: preserve soft dirty in remove_migration_pte()
mm/migrate: remove unnecessary is_zone_device_page() check
mm/rmap: fixup copying of soft dirty and uffd ptes
mm/migrate: fixup setting UFFD_WP flag
mm: madvise: fix vma user-after-free
checkpatch: fix the usage of capture group ( ... )
fork: adjust sysctl_max_threads definition to match prototype
ipc: adjust proc_ipc_sem_dointvec definition to match prototype
mm: track page table modifications in __apply_to_page_range()
MAINTAINERS: IA64: mark Status as Odd Fixes only
MAINTAINERS: add LLVM maintainers
MAINTAINERS: update Cavium/Marvell entries
mm: slub: fix conversion of freelist_corrupted()
mm: memcg: fix memcg reclaim soft lockup
memcg: fix use-after-free in uncharge_batch
|
|
The usage of "capture group (...)" in the immediate condition after `&&`
results in `$1` being uninitialized. This issues a warning "Use of
uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl
line 2638".
I noticed this bug while running checkpatch on the set of commits from
v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in
their commit message.
This bug was introduced in the script by commit e518e9a59ec3
("checkpatch: emit an error when there's a diff in a changelog"). It
has been in the script since then.
The author intended to store the match made by capture group in variable
`$1`. This should have contained the name of the file as `[\w/]+`
matched. However, this couldn't be accomplished due to usage of capture
group and `$1` in the same regular expression.
Fix this by placing the capture group in the condition before `&&`.
Thus, `$1` can be initialized to the text that capture group matches
thereby setting it to the desired and required value.
Fixes: e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog")
Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Joe Perches <joe@perches.com>
Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandey
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
uninitialized_var() macro was removed from the sources [1] and
other warning-silencing tricks were deprecated [2]. The purpose of this
cocci script is to prevent new occurrences of uninitialized_var()
open-coded variants.
[1] commit 63a0895d960a ("compiler: Remove uninitialized_var() macro")
[2] commit 4b19bec97c88 ("docs: deprecated.rst: Add uninitialized_var()")
Cc: Kees Cook <keescook@chromium.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This script can be useful for:
- Figuring out the list of modules you need to pack in initrd
- Figuring out the list of drivers you need to modularize for a device
to be fully functional without building in any dependencies.
- Figuring out which drivers to enable first, when porting drivers
between kernels (say, to upstream).
- Plotting graphs of system dependencies, etc.
Usage: dev-needs.sh [-c|-d|-m|-f] [filter options] <list of devices>
This script needs to be run on the target device once it has booted to a
shell.
The script takes as input a list of one or more device directories under
/sys/devices and then lists the probe dependency chain (suppliers and
parents) of these devices. It does a breadth first search of the dependency
chain, so the last entry in the output is close to the root of the
dependency chain.
By default it lists the full path to the devices under /sys/devices.
It also takes an optional modifier flag as the first parameter to change
what information is listed in the output. If the requested information is
not available, the device name is printed.
-c lists the compatible string of the dependencies
-d lists the driver name of the dependencies that have probed
-m lists the module name of the dependencies that have a module
-f list the firmware node path of the dependencies
-g list the dependencies as edges and nodes for graphviz
-t list the dependencies as edges for tsort
The filter options provide a way to filter out some dependencies:
--allow-no-driver By default dependencies that don't have a driver
attached are ignored. This is to avoid following
device links to "class" devices that are created
when the consumer probes (as in, not a probe
dependency). If you want to follow these links
anyway, use this flag.
--exclude-devlinks Don't follow device links when tracking probe
dependencies.
--exclude-parents Don't follow parent devices when tracking probe
dependencies.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20200901224842.1787825-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Semi-automatic removing of localization macros changed the line
from "prompt = _(prompt);" to "prompt = prompt;". Drop the
reduntand assignment.
Fixes: 694c49a7c01c ("kconfig: drop localization support")
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
A user reported:
'Use of uninitialized value $ENV{"LMC_KEEP"} in split at
./scripts/kconfig/streamline_config.pl line 596.'
so first check that $ENV{LMC_KEEP} is defined before trying
to use it.
Fixes: c027b02d89fd ("streamline_config.pl: add LMC_KEEP to preserve some kconfigs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Extend the list of free functions with kvfree(), kvfree_sensitive(),
vfree().
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-09-01
The following pull-request contains BPF updates for your *net-next* tree.
There are two small conflicts when pulling, resolve as follows:
1) Merge conflict in tools/lib/bpf/libbpf.c between 88a82120282b ("libbpf: Factor
out common ELF operations and improve logging") in bpf-next and 1e891e513e16
("libbpf: Fix map index used in error message") in net-next. Resolve by taking
the hunk in bpf-next:
[...]
scn = elf_sec_by_idx(obj, obj->efile.btf_maps_shndx);
data = elf_sec_data(obj, scn);
if (!scn || !data) {
pr_warn("elf: failed to get %s map definitions for %s\n",
MAPS_ELF_SEC, obj->path);
return -EINVAL;
}
[...]
2) Merge conflict in drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c between
9647c57b11e5 ("xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for
better performance") in bpf-next and e20f0dbf204f ("net/mlx5e: RX, Add a prefetch
command for small L1_CACHE_BYTES") in net-next. Resolve the two locations by retaining
net_prefetch() and taking xsk_buff_dma_sync_for_cpu() from bpf-next. Should look like:
[...]
xdp_set_data_meta_invalid(xdp);
xsk_buff_dma_sync_for_cpu(xdp, rq->xsk_pool);
net_prefetch(xdp->data);
[...]
We've added 133 non-merge commits during the last 14 day(s) which contain
a total of 246 files changed, 13832 insertions(+), 3105 deletions(-).
The main changes are:
1) Initial support for sleepable BPF programs along with bpf_copy_from_user() helper
for tracing to reliably access user memory, from Alexei Starovoitov.
2) Add BPF infra for writing and parsing TCP header options, from Martin KaFai Lau.
3) bpf_d_path() helper for returning full path for given 'struct path', from Jiri Olsa.
4) AF_XDP support for shared umems between devices and queues, from Magnus Karlsson.
5) Initial prep work for full BPF-to-BPF call support in libbpf, from Andrii Nakryiko.
6) Generalize bpf_sk_storage map & add local storage for inodes, from KP Singh.
7) Implement sockmap/hash updates from BPF context, from Lorenz Bauer.
8) BPF xor verification for scalar types & add BPF link iterator, from Yonghong Song.
9) Use target's prog type for BPF_PROG_TYPE_EXT prog verification, from Udip Pant.
10) Rework BPF tracing samples to use libbpf loader, from Daniel T. Lee.
11) Fix xdpsock sample to really cycle through all buffers, from Weqaar Janjua.
12) Improve type safety for tun/veth XDP frame handling, from Maciej Żenczykowski.
13) Various smaller cleanups and improvements all over the place.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Found when Colin King fixed a typo for falied/failed
and a git grep showed 2 entries in this file.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This patch adds clang-tidy and the clang static-analyzer as make
targets. The goal of this patch is to make static analysis tools
usable and extendable by any developer or researcher who is familiar
with basic c++.
The current static analysis tools require intimate knowledge of the
internal workings of the static analysis. Clang-tidy and the clang
static analyzers expose an easy to use api and allow users unfamiliar
with clang to write new checks with relative ease.
===Clang-tidy===
Clang-tidy is an easily extendable 'linter' that runs on the AST.
Clang-tidy checks are easy to write and understand. A check consists of
two parts, a matcher and a checker. The matcher is created using a
domain specific language that acts on the AST
(https://clang.llvm.org/docs/LibASTMatchersReference.html). When AST
nodes are found by the matcher a callback is made to the checker. The
checker can then execute additional checks and issue warnings.
Here is an example clang-tidy check to report functions that have calls
to local_irq_disable without calls to local_irq_enable and vice-versa.
Functions flagged with __attribute((annotation("ignore_irq_balancing")))
are ignored for analysis. (https://reviews.llvm.org/D65828)
===Clang static analyzer===
The clang static analyzer is a more powerful static analysis tool that
uses symbolic execution to find bugs. Currently there is a check that
looks for potential security bugs from invalid uses of kmalloc and
kfree. There are several more general purpose checks that are useful for
the kernel.
The clang static analyzer is well documented and designed to be
extensible.
(https://clang-analyzer.llvm.org/checker_dev_manual.html)
(https://github.com/haoNoQ/clang-analyzer-guide/releases/download/v0.1/clang-analyzer-guide-v0.1.pdf)
The main draw of the clang tools is how accessible they are. The clang
documentation is very nice and these tools are built specifically to be
easily extendable by any developer. They provide an accessible method of
bug-finding and research to people who are not overly familiar with the
kernel codebase.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This warning was useful when users previously needed to manually
build the kernel and run this script.
Now you can simply do 'make compile_commands.json', which updates
all the necessary build artifacts and automatically creates the
compilation database. There is no more worry for a mistake like
"Oh, I forgot to build the kernel".
Now, this warning is rather annoying.
You can create compile_commands.json for an external module:
$ make M=/path/to/your/external/module compile_commands.json
Then, this warning is displayed since there are usually less than
300 files in a single module.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
This script currently searches the specified directory for .cmd files.
One drawback is it may contain stale .cmd files after you rebuild the
kernel several times without 'make clean'.
This commit supports *.o, *.a, and modules.order as positional
parameters. If such files are given, they are parsed to collect
associated .cmd files. I added a generator helper for each of them.
This feature is useful to get the list of active .cmd files from the
last build, and will be used by the next commit to wire up the
compile_commands.json rule to the Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Currently, this script walks under the specified directory (default to
the current directory), then parses all .cmd files found.
Split it into a separate helper function because the next commit will
add more helpers to pick up .cmd files associated with given file(s).
There is no point to build and return a huge list at once. I used a
generator so it works in the for-loop with less memory.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
