Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Initial support for the rk3568 Qnap TS433 NAS, the rk3588-based Tiger SoM
from Theobroma-Systems and the rk3588-based Toybrick TB-RK3588X.
Some fixes to conform to dt-bindings for i2s (rk3588, rk356x) and
rk356x video-decoder (missing interrupt-names).
Correcting the vendor in the compatible for OrangePi RK3399 and BananaPi
R2 Pro (discussed with DT-maintainers beforehand of course).
The VO1-GRF syscon needs its clock to work, and that clock also needed to
be actually exported forst, so we're sharing a branch with the Rockchip
clock-tree (that already got merged into the main clock-tree for 6.9) for
this small shared code.
And as another step on the long road to graphics output on rk3588, 6.9 will
get the hdmi-phy via the phy-tree, so here the dts node is added.
* tag 'v6.9-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm64: dts: rockchip: Add basic support for QNAP TS-433
dt-bindings: arm: rockchip: Add QNAP TS-433
arm64: dts: rockchip: add Haikou baseboard with RK3588-Q7 SoM
arm64: dts: rockchip: add RK3588-Q7 (Tiger) SoM
dt-bindings: arm: rockchip: Add Theobroma-Systems RK3588 Q7 with baseboard
arm64: dts: rockchip: drop rockchip,trcm-sync-tx-only from rk3588 i2s
arm64: dts: rockchip: fix reset-names for rk356x i2s2 controller
arm64: dts: rockchip: add missing interrupt-names for rk356x vdpu
arm64: dts: rockchip: add clock to vo1-grf syscon on rk3588
dt-bindings: arm: rockchip: Add Toybrick TB-RK3588X
arm64: dts: rockchip: Add devicetree support for TB-RK3588X board
arm64: dts: rockchip: adjust vendor on orangepi rk3399 board
arm64: dts: rockchip: adjust vendor on Banana Pi R2 Pro board
dt-bindings: arm: rockchip: Correct vendor for Banana Pi R2 Pro
dt-bindings: arm: rockchip: Correct vendor for Orange Pi RK3399 board
arm64: dts: rockchip: Add HDMI0 PHY to rk3588
dt-bindings: clock: rk3588: add missing PCLK_VO1GRF
dt-bindings: clock: rk3588: drop CLK_NR_CLKS
clk: rockchip: rk3588: fix CLK_NR_CLKS usage
Link: https://lore.kernel.org/r/3695004.ElGaqSPkdT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.9
Four variants of Samsung Galaxy Core Prime and Grand Prime, built on
MSM8916, and the Hardware Development Kit (HDK) for SM8550, are
introduced.
On X Elite audio and compute remoteprocs, IPCC, PCIe, AOSS QMP, SMP2P,
TCSR, USB, display, audio, and soundwire support is introduced, and
enabled across the CRD and QCP devices.
For SM8650 PCIe controllers are moved to GIC-ITS and msi-map-mask is
defined. Missing qlink-logging reserved-memory region is added for the
modem remoteproc. FastRPC compute contexts are marked dma-coherent.
Audio, USB Type-C and PM8010 support is introduced across MTP and QRD
devices.
GPU cooling devices are hooked up across MSM8916, MSM8939, SC8180X,
SDM630, SDM845, SM6115, SM8150, SM8250, SM8350, and SM8550.
UFS PHY clocks are corrected across MSM8996, MSM8998, SC8180X, SC8280XP,
SDM845, SM6115, SM6125, SM8150, SM8250, SM8350, SM8550, and SM8650.
PCI MSI interrupts are wired up across SM8150, SM8250, SM8350, SM8450,
SM8550, SM8650, SC7280, and SC8180X
On IPQ6018 QUP5 I2C, tsens sand thermal zones are defined. The Inline
Crypto Engine (ICE) is enabled for IPQ9574.
On MSM8953 the GPU and its IOMMU is introduced, the reset for the
display subsystem is also wired up.
VLS CLAMP registers are specified for USB3 PHYs on MSM8998, QCM2290, and
SM6115.
USB Type-C port management is enabled on QRB4210 RB2.
On the SA8295P ADP the MAX20411 regulator powering the GPU rails is
introduced and the GPU is enabled. The first PCI instance on SA8540P
Ride is disabled for now, as a fix for the interrupt storm produced here
has not been presented.
On SA8775P the firmware memory map has changed and is updated. Safety
IRQ is added to the Ethernet controller.
On SC7180 UFS support is introduced and the cros-ec-spi is marked as
wakeup source.
For SC7280 capacity and DPC properties are added, cryptobam definition
is improved to work in more firmware environments, more Chrome-specific
properties are moved out from main dtsi, and cros-ec-spi is maked as a
wakeup source. Slimbus definition is added to the platform.
A missing reserved-memory range is added to Fairphone FP5, PMIC GLINK
and Venus are enabled. LEDs are introduced and voltage settings
corrected on the QCM6490 IDP, and RB3gen2 sees the same voltage changes
and GCC protected clocks are introduced to make the board boot properly.
RPMh sleep stats and a variety of cleanups and fixes are introduced for
SC8180X.
On SC8280XP the additional tsens instances are introduced. Camera
Subsystem and Camera Control Interface (CCI) are added. PMIC die-temp
vadc channels are introduced on the CRD, to allow ADC channels to be
tied to the shared PMIC temp-alarms, to actually report temperature.
On SDM630 USB QMP PHY support is introduced and enabled on the Inforce
IFC6560 board. On the various Sony Xperia XA2 variants WLED is enabled
and configured.
On SM6350 display subsystem interconnects and tsens-based thermal zones
are added. On SM7125 UFS support is added.
On Fairphone FP4, on SM7225, display and GPU are enabled, and firmware
paths are corrected.
SM8150 PCIe controller definitions are corrected.
As with SM8650, the SM8550 the fastrpc compute contexts are marked
dm-coherent, and PCIe controllers are moved to use GIC-ITS. The UFS
controller frequency definition is moved to the generic opp-table.
Touchscreen is enabled on the QRD device.
As usual, a variety of smaller cleanups and corrections to match
DeviceTree bindings and style guidelines are introduced across the
various files.
* tag 'qcom-arm64-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (176 commits)
arm64: dts: qcom: sm6115: fix USB PHY configuration
arm64: dts: sm8650: Add msi-map-mask for PCIe nodes
arm64: dts: qcom: replace underscores in node names
dt-bindings: arm: qcom: Add Samsung Galaxy Tab 4 10.1 LTE
arm64: dts: qcom: pm4125: define USB-C related blocks
arm64: dts: qcom: sa8540p-ride: disable pcie2a node
arm64: dts: qcom: sc7280: add slimbus DT node
arm64: dts: qcom: sc7280: Add capacity and DPC properties
arm64: dts: qcom: pmi632: Add PBS client and use in LPG node
arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1
arm64: dts: qcom: sm8150: correct PCIe wake-gpios
arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios
arm64: dts: qcom: sm7225-fairphone-fp4: Enable display and GPU
arm64: dts: qcom: sm6350: Remove "disabled" state of GMU
arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add fuel gauge
arm64: dts: qcom: sm6350: Add interconnect for MDSS
arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add initial device trees
arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
arm64: dts: qcom: sc8180x: describe all PCI MSI interrupts
arm64: dts: qcom: minor whitespace cleanup
...
Link: https://lore.kernel.org/r/20240225050146.484422-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.9
Mostly work around Google GS101 SoC and Pixel phone (Oriole) adding
support for:
1. Multi Core Timer (MCT) clocksource.
2. Several clock controllers (DTS and DT bindings) and use new clocks in
several other device nodes.
3. More serial-interface instances: USI8 and USI12 with I2C.
Exynos850:
1. SPI and DMA controllers (PL330).
* tag 'samsung-dt64-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: fsd: Add fifosize for UART in Device Tree
arm64: dts: exynos: gs101: minor whitespace cleanup
arm64: dts: exynos: gs101: enable i2c bus 12 on gs101-oriole
arm64: dts: exynos: gs101: define USI12 with I2C configuration
arm64: dts: exynos: gs101: enable cmu-peric1 clock controller
dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit
arm64: dts: exynos: Add SPI nodes for Exynos850
arm64: dts: exynos: Add PDMA node for Exynos850
arm64: dts: exynos: gs101: use correct clocks for usi_uart
arm64: dts: exynos: gs101: use correct clocks for usi8
arm64: dts: exynos: gs101: sysreg_peric0 needs a clock
arm64: dts: exynos: gs101: enable eeprom on gs101-oriole
arm64: dts: exynos: gs101: define USI8 with I2C configuration
arm64: dts: exynos: gs101: update USI UART to use peric0 clocks
arm64: dts: exynos: gs101: enable cmu-peric0 clock controller
arm64: dts: exynos: gs101: remove reg-io-width from serial
arm64: dts: exynos: gs101: define Multi Core Timer (MCT) node
dt-bindings: clock: exynos850: Add PDMA clocks
dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
Link: https://lore.kernel.org/r/20240218182141.31213-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add PCLK_VO1GRF to complement PCLK_VO0GRF. This will be needed
for HDMI support.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240126182919.48402-4-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
CLK_NR_CLKS should not be part of the binding. Let's drop it, since
the kernel code no longer uses it either.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240126182919.48402-3-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add dt-schema documentation and clock IDs for the Connectivity
Peripheral 1 (PERIC1) clock management unit.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240201161258.1013664-3-andre.draszik@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Merge clock topic branch that introduces the SC8180X CLK_REF enable
clocks.
|
|
Add missing QREF clocks for UFS MEM and UFS CARD controllers.
Fixes: 0fadcdfdcf57 ("dt-bindings: clock: Add SC8180x GCC binding")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240131-ufs-phy-clock-v3-3-58a49d2f4605@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
arm64-for-6.9
Merge MSM8953 GCC DeviceTree binding update from topic branch, to get
access to newly introduced MDSS reset constants.
|
|
Add new defines for some more BCRs found on MSM8953.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
[luca: expand commit message, add more resets]
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20240125-msm8953-mdss-reset-v2-1-fd7824559426@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for the X1E80100 Camera Clock Controller.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-5-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for the X1E80100 TCSR Clock Controller.
Co-developed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-4-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for the X1E80100 Graphics Clock Controller.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-3-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for the X1E80100 Display Clock Controller.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-2-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car
V4M (R8A779H0) SoC.
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/11acbd2a30b58607474e9c32eb798b3a00e85e73.1706194617.git.geert+renesas@glider.be
|
|
Add constants for Peripheral DMA (PDMA) clocks in CMU_CORE controller:
- PDMA_ACLK: clock for PDMA0 (regular DMA)
- SPDMA_ACLK: clock for PDMA1 (secure DMA)
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240120012948.8836-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add dt-schema documentation for the Connectivity Peripheral 0 (PERIC0)
clock management unit.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240119111132.1290455-2-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Only a couple new SoCs have support added this time, primarily for
Qualcomm SM8650 based on the diffstat. Otherwise this is a collection
of non-critical fixes and cleanups to various clk drivers and their DT
bindings.
Nothing is changed in the core clk framework this time, although
there's a patch to fix a basic clk type initialization function. In
general, this pile looks to be on the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas
RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling
separate memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000
and QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"A new drivers/cache/ subsystem is added to contain drivers for
abstracting cache flush methods on riscv and potentially others, as
this is needed for handling non-coherent DMA but several SoCs require
nonstandard hardware methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
MT8195, and driver support for MT8188 along with some code
refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA
bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
hisilicon"
* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
memory: ti-emif-pm: Convert to platform remove callback returning void
memory: ti-aemif: Convert to platform remove callback returning void
memory: tegra210-emc: Convert to platform remove callback returning void
memory: tegra186-emc: Convert to platform remove callback returning void
memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
memory: exynos5422-dmc: Convert to platform remove callback returning void
memory: renesas-rpc-if: Convert to platform remove callback returning void
memory: omap-gpmc: Convert to platform remove callback returning void
memory: mtk-smi: Convert to platform remove callback returning void
memory: jz4780-nemc: Convert to platform remove callback returning void
memory: fsl_ifc: Convert to platform remove callback returning void
memory: fsl-corenet-cf: Convert to platform remove callback returning void
memory: emif: Convert to platform remove callback returning void
memory: brcmstb_memc: Convert to platform remove callback returning void
memory: brcmstb_dpfe: Convert to platform remove callback returning void
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
...
|
|
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
* clk-zynq:
drivers: clk: zynqmp: update divider round rate logic
drivers: clk: zynqmp: calculate closest mux rate
* clk-xilinx:
clocking-wizard: Add support for versal clocking wizard
dt-bindings: clock: xilinx: add versal compatible
* clk-stm:
dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform
clk: stm32mp1: use stm32mp13 reset driver
clk: stm32mp1: move stm32mp1 clock driver into stm32 directory
|
|
clk-next
* clk-imx:
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
dt-bindings: clock: support i.MX93 ANATOP clock module
* clk-qcom: (41 commits)
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
clk: qcom: gcc-sm8550: Mark RCGs shared where applicable
clk: qcom: gcc-sm8550: use collapse-voting for PCIe GDSCs
clk: qcom: gcc-sm8550: Mark the PCIe GDSCs votable
clk: qcom: gcc-sm8550: Add the missing RETAIN_FF_ENABLE GDSC flag
clk: qcom: camcc-sc8280xp: Prevent error pointer dereference
clk: qcom: videocc-sm8150: Add runtime PM support
clk: qcom: videocc-sm8150: Add missing PLL config property
clk: qcom: videocc-sm8150: Update the videocc resets
dt-bindings: clock: Update the videocc resets for sm8150
clk: qcom: rpmh: Add support for X1E80100 rpmh clocks
clk: qcom: Add Global Clock controller (GCC) driver for X1E80100
dt-bindings: clock: qcom-rpmhcc: Add RPMHCC bindings for X1E80100
dt-bindings: clock: qcom: Add X1E80100 GCC clocks
clk: qcom: Add ECPRICC driver support for QDU1000 and QRU1000
clk: qcom: branch: Add mem ops support for branch2 clocks
...
* clk-amlogic:
clk: meson: g12a: add CSI & ISP gates clocks
clk: meson: g12a: add MIPI ISP clocks
dt-bindings: clock: g12a-clkc: add MIPI ISP & CSI PHY clock ids
clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks
dt-bindings: clk: g12a-clkc: add CTS_ENCL clock ids
* clk-mediatek:
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: brcm,kona-ccu: convert to YAML
dt-bindings: arm: mediatek: move ethsys controller & convert to DT schema
dt-bindings: Remove alt_ref from versal
|
|
Add MT7988 clock dt-bindings for topckgen, apmixedsys, infracfg,
ethernet and xfipll subsystem clocks.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/27f99db432e9ccc804cc5b6501d7d17d72cae879.1702849494.git.daniel@makrotopia.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add definition for the clock controller of the CV1800 series SoC.
For CV181X, it has a clock that CV180X does not have. To avoid misuse,
also add a compatible string to identify CV181X series SoC.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Link: https://github.com/milkv-duo/duo-files/blob/main/hardware/CV1800B/CV1800B-CV1801B-Preliminary-Datasheet-full-en.pdf
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/IA1PR20MB49535E448097F6FFC1218C39BB90A@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 updates for v6.8
Support is added for the new Snapdragon 8 Gen 3 mobile platform, with
support for the MTP and QRD development devices, the new Snapdragon X
Elite compute platform with QCP and CRD development/references devices,
the QCS6590/QCM6490 platform with support for the IDP development device
and the Robotics RB3gen2 board, the Huawei Honor 5X/GR5 handset
built on MSM8939, and Xiaomi Pad 6 on SM8250.
On IPQ5018 and IPQ6018 platform support for CPUfreq, USB, and one
additional QUP SPI controller is added.
CPU OPP tables are selectively enabled based on fuses, for both IPQ5332
and IPQ6018. IPQ6018 gains description of a few more SPI and UART nodes.
Common elements of the IPQ9574 RDP boards are refactored into a common
include file. IPQ9574 also gains description of its LEDs and WPS
busttons.
MSM8916 finally gets the DSP-based audio described, and this is enabled
for a variety of boards. Acer Iconia Talk S and Loncheer L8910 gains
notification LED, battery and charger support is added to Loncheer
L8150, and GPU is enabled for Samsung Galaxy Tab A.
Similariy DSP-based audio is added on MSM8939, the BAM-DMUX support is
enabled as well. The Longcheer L9100 gains RGB notification LED support,
and the wireless subsystem is enabled.
Missing SPI controllers are described on MSM8953. On MSM8996 the MPM is
enabled, to allow using wakeup interrupts. Interconnect providers, MPM
and display are added to QCM2290.
UFS, remoteprocs and WiFi is enabled for Fairphone FP5.
On Fairphone FP3 audio, WiFi and Bluetooth are enabled.
On the Robotics RB1, HDMI and the CAN bus controller are added. On
Robotics RB2 Bluetooth, the modem remoteproc and WiFi are enabled.
Bluetooth is enabled on the Robotics RB5.
On SA8775P tsens and thermal is added, as well as the random number
generator.
Sound and RTC support is added for the Acer Aspire 1.
On SC7280 DeviceTree is refactored, in order to allow non-Chrome devices
to inherit the base dtsi. Support for UFS, crypto, TrustZone based
remoteprocs, the Camera Control Interface (CCI) and random number
generator support are added. Additionally a variety of smaller fixes are
introduced.
A variety of fixes are introduced for SC8180X, in particular missing
power-domains and interconnects.
On SC8280XP the camera clock controller is added, and a number of
smaller fixes are introduced.
The display subsystem in SDM670 is described.
On SDX75 interconnect providers are added, as is USB3 and the related
PHY, which is then enabled on the IDP device.
On SM6115 interconnect providers are added and existing clients are
wired up. A UART controller is added as well.
The MPM is added, to provide wakeup interrutps, on SM6375. The modem
subsystem, and WiFi are enabled on Sony Xperia 10 IV, a few regulator
supplies are corrected.
On SM8150 the DisplayPort controller is added, for USB Type-C output,
which together with the addition of HDMI is described on the HDK board.
GPU and random number generator support are added to SM8450, and enabled
on the HDK board.
On SM8550 GPU, IPA, random number generator, missing SoundWire ports are
added, and enabled on both MTP and QRD devices.
Additionally a large number of smaller functional and DeviceTree binding
validation issues are corrected across a variety of platforms.
* tag 'qcom-arm64-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (288 commits)
arm64: dts: qcom: sc8180x-primus: Allow UFS regulators load/mode setting
arm64: dts: qcom: sc8180x: Describe the GIC redistributor
arm64: dts: qcom: sc8180x: Add interconnects to UFS
arm64: dts: qcom: sc8180x: Add missing MDP clocks
arm64: dts: qcom: sc8180x: Add UFS GDSC
arm64: dts: qcom: sc7280*: move MPSS and WPSS memory to dtsi
arm64: dts: qcom: sc7280: Rename reserved-memory nodes
arm64: dts: qcom: sc7280: Remove unused second MPSS reg
arm64: dts: qcom: sdm670: add display subsystem
arm64: dts: qcom: sm8150-hdk: enable DisplayPort and USB-C altmode
arm64: dts: qcom: sm8150: add USB-C ports to the OTG USB host
arm64: dts: qcom: sm8150: add USB-C ports to the USB+DP QMP PHY
arm64: dts: qcom: sm8150: add DisplayPort controller
arm64: dts: qcom: sm8150-hdk: fix SS USB regulators
arm64: dts: qcom: sm8150-hdk: enable HDMI output
arm64: dts: qcom: sm8150: make dispcc cast minimal vote on MMCX
arm64: dts: qcom: sm8650: add fastrpc-compute-cb nodes
arm64: dts: qcom: sm8550-qrd: add PM8010 regulators
arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators
arm64: dts: qcom: qcm2290: Hook up MPM
...
Link: https://lore.kernel.org/r/20231219145402.874161-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The gs101 clock defines from the bindings header are derived from the
clock register names found in the datasheet under some certain rules.
The CMU TOP gate clock defines missed to include the required "CMU"
differentiator which will cause collisions with the gate clock defines
of other clock units. Rename the TOP gate clock defines to include "CMU".
Update the clock driver to use the new defines in order to not break
compilation and bisect-ability. There are no device trees that use the
previous defines.
Fixes: 0a910f160638 ("dt-bindings: clock: Add Google gs101 clock management unit bindings")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231218064333.479885-1-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Adds clock and reset binding entries for STM32MP25 SoC family
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231208143700.354785-4-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
clk-for-6.8
Merge SM8150 Video clock controller through a topic branch, to allow
constants to be made available in the DeviceTree branch as well.
|
|
Add all the available resets for the video clock controller
on sm8150.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-1-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
166 was skipped by mistake and two clocks:
* CLK_MOUT_CMU_HSI0_USBDPDGB
* CLK_GOUT_HSI0_USBDPDGB
Have an incorrect DGB ending instead of DBG.
This is an ABI break, but as the patch was only applied yesterday this
header has never been in an actual release so it seems better to fix
this early than ignore it.
Fixes: 0a910f160638 ("dt-bindings: clock: Add Google gs101 clock management unit bindings")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20231211162331.435900-7-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Provide dt-schema documentation for Google gs101 SoC clock controller.
Currently this adds support for cmu_top, cmu_misc and cmu_apm.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231209233106.147416-3-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Merge the X1E80100 clock bindings to get access to the clock constants.
|
|
Merge the X1E80100 DeviceTree bindings through a topic branch, to allow
the clock constants to be shared with the DeviceTree branch.
|
|
Add device tree bindings for global clock controller on X1E80100 SoCs.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231205061002.30759-2-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'20231106-topic-sm8650-upstream-clocks-v3-5-761a6fadb4c0@linaro.org' into arm64-for-6.8
Merge the SM8650 clock bindings, to gain access to the clock constants.
|
|
clk-for-6.8
Merge the ECPI clock controller through a topic branch to make it
possible to merge the clock constants into the DeviceTree branch as
well.
|
|
Add device tree bindings for qcom ecpri clock controller on QDU1000 and
QRU1000 SoCs.
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231123064735.2979802-2-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'20231106-topic-sm8650-upstream-clocks-v3-5-761a6fadb4c0@linaro.org' into clk-for-6.8
Merge SM8650 GCC, TCSRCC, DISPCC, GPUCC and RPMHCC bindings through a
topic branch to make it possible to also merge and use the constants in
the DeviceTree branch.
|
|
Add bindings documentation for the SM8650 Graphics Clock Controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-clocks-v3-4-761a6fadb4c0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for the SM8650 Display Clock Controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-clocks-v3-3-761a6fadb4c0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for the SM8650 General Clock Controller.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-clocks-v3-2-761a6fadb4c0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for the SM8650 TCSR Clock Controller.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-clocks-v3-1-761a6fadb4c0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When adding in the indexes for this clock-controller we missed
GCC_CAMSS_CSI2_AHB_CLK, GCC_CAMSS_CSI2_CLK, GCC_CAMSS_CSI2PHY_CLK,
GCC_CAMSS_CSI2PIX_CLK and GCC_CAMSS_CSI2RDI_CLK.
Add them in now.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231029061948.505883-1-vincent.knecht@mailoo.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device tree bindings for the camera clock controller on
Qualcomm SC8280XP platform.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231026105345.3376-3-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add MIPI ISP & CSI PHY clock ids to G12A clock bindings header
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20231114-topic-amlogic-upstream-isp-clocks-v1-1-223958791501@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Add new CLK ids for the CTS_ENCL and CTS_ENCL_SEL clocks
on G12A compatible SoCs.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231124-amlogic-v6-4-upstream-dsi-ccf-vim3-v9-1-95256ed139e6@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
'clk-frac-divider' into clk-next
- Make clk kunit tests work with lockdep
- Fix clk gate kunit test for big-endian
- Convert more than a handful of clk drivers to use regmap maple tree
- Consider the CLK_FRAC_DIVIDER_ZERO_BASED in fractional divider clk
implementation
* clk-renesas: (23 commits)
clk: renesas: r9a08g045: Add clock and reset support for SDHI1 and SDHI2
clk: renesas: rzg2l: Use %x format specifier to print CLK_ON_R()
clk: renesas: Add minimal boot support for RZ/G3S SoC
clk: renesas: rzg2l: Add divider clock for RZ/G3S
clk: renesas: rzg2l: Refactor SD mux driver
clk: renesas: rzg2l: Remove CPG_SDHI_DSEL from generic header
clk: renesas: rzg2l: Add struct clk_hw_data
clk: renesas: rzg2l: Add support for RZ/G3S PLL
clk: renesas: rzg2l: Remove critical area
clk: renesas: rzg2l: Fix computation formula
clk: renesas: rzg2l: Trust value returned by hardware
clk: renesas: rzg2l: Lock around writes to mux register
clk: renesas: rzg2l: Wait for status bit of SD mux before continuing
clk: renesas: rcar-gen3: Extend SDnH divider table
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoC
clk: renesas: r8a7795: Constify r8a7795_*_clks
clk: renesas: r9a06g032: Name anonymous structs
clk: renesas: r9a06g032: Fix kerneldoc warning
clk: renesas: rzg2l: Use u32 for flag and mux_flags
clk: renesas: rzg2l: Use FIELD_GET() for PLL register fields
...
* clk-kunit:
clk: Fix clk gate kunit test on big-endian CPUs
clk: Parameterize clk_leaf_mux_set_rate_parent
clk: Drive clk_leaf_mux_set_rate_parent test from clk_ops
* clk-regmap:
clk: versaclock7: Convert to use maple tree register cache
clk: versaclock5: Convert to use maple tree register cache
clk: versaclock3: Convert to use maple tree register cache
clk: versaclock3: Remove redundant _is_writeable()
clk: si570: Convert to use maple tree register cache
clk: si544: Convert to use maple tree register cache
clk: si5351: Convert to use maple tree register cache
clk: si5341: Convert to use maple tree register cache
clk: si514: Convert to use maple tree register cache
clk: cdce925: Convert to use maple tree register cache
* clk-frac-divider:
clk: fractional-divider: tests: Add test suite for edge cases
clk: fractional-divider: Improve approximation when zero based and export
|
|
and 'clk-qcom' into clk-next
- Add consumer info to clk debugfs
- Fix various clk drivers that have clk_hw_onecell_data not at the end
of an allocation
* clk-debugfs:
clk: Allow phase adjustment from debugfs
clk: Show active consumers of clocks in debugfs
* clk-spreadtrum:
clk: sprd: Composite driver support offset config
* clk-sifive:
clk: sifive: Allow building the driver as a module
clk: analogbits: Allow building the library as a module
* clk-counted:
clk: socfpga: agilex: Add bounds-checking coverage for struct stratix10_clock_data
clk: socfpga: Fix undefined behavior bug in struct stratix10_clock_data
clk: visconti: Add bounds-checking coverage for struct visconti_pll_provider
clk: visconti: Fix undefined behavior bug in struct visconti_pll_provider
* clk-qcom: (36 commits)
clk: qcom: apss-ipq6018: add the GPLL0 clock also as clock provider
clk: qcom: ipq5332: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq9574: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq5018: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq6018: drop the CLK_SET_RATE_PARENT flag from PLL clocks
clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocks
clk: qcom: gcc-ipq6018: add QUP6 I2C clock
clk: qcom: apss-ipq6018: ipq5332: add safe source switch for a53pll
clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config
clk: qcom: apss-ipq-pll: Use stromer plus ops for stromer plus pll
clk: qcom: clk-alpha-pll: introduce stromer plus ops
clk: qcom: config IPQ_APSS_6018 should depend on QCOM_SMEM
clk: qcom: videocc-sm8550: switch to clk_lucid_ole_pll_configure
clk: qcom: gpucc-sm8550: switch to clk_lucid_ole_pll_configure
clk: qcom: Replace of_device.h with explicit includes
clk: qcom: smd-rpm: Move CPUSS_GNoC clock to interconnect
clk: qcom: cbf-msm8996: Convert to platform remove callback returning void
clk: qcom: gcc-sm8150: Fix gcc_sdcc2_apps_clk_src
clk: qcom: Add GCC driver support for SM4450
dt-bindings: clock: qcom: Add GCC clocks for SM4450
...
|
|
'clk-imx' into clk-next
- Add clock driver for TWL6032
* clk-doc:
clk: linux/clk-provider.h: fix kernel-doc warnings and typos
* clk-amlogic:
clk: meson: S4: select CONFIG_COMMON_CLK_MESON_CLKC_UTILS
clk: meson: S4: add support for Amlogic S4 SoC peripheral clock controller
clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver
dt-bindings: clock: document Amlogic S4 SoC peripherals clock controller
dt-bindings: clock: document Amlogic S4 SoC PLL clock controller
* clk-mediatek:
clk: mediatek: fix double free in mtk_clk_register_pllfh()
clk: mediatek: clk-mt2701: Add check for mtk_alloc_clk_data
clk: mediatek: clk-mt7629: Add check for mtk_alloc_clk_data
clk: mediatek: clk-mt7629-eth: Add check for mtk_alloc_clk_data
clk: mediatek: clk-mt6797: Add check for mtk_alloc_clk_data
clk: mediatek: clk-mt6779: Add check for mtk_alloc_clk_data
clk: mediatek: clk-mt6765: Add check for mtk_alloc_clk_data
* clk-twl:
clk: twl: add clock driver for TWL6032
* clk-imx:
clk: imx: imx8qm/qxp: add more resources to whitelist
clk: imx: scu: ignore clks not owned by Cortex-A partition
clk: imx8: remove MLB support
clk: imx: imx8qm-rsrc: drop VPU_UART/VPUCORE
clk: imx: imx8qxp: correct the enet clocks for i.MX8DXL
clk: imx: imx8qxp: Fix elcdif_pll clock
clk: imx: imx8dxl-rsrc: keep sorted in the ascending order
clk: imx: imx6sx: Allow a different LCDIF1 clock parent
clk: imx: imx8mq: correct error handling path
clk: imx8mp: Remove non-existent IMX8MP_CLK_AUDIOMIX_PDM_ROOT
clk: imx: imx8: Simplify clk_imx_acm_detach_pm_domains()
clk: imx: imx8: Add a message in case of devm_clk_hw_register_mux_parent_data_table() error
clk: imx: imx8: Fix an error handling path in imx8_acm_clk_probe()
clk: imx: imx8: Fix an error handling path if devm_clk_hw_register_mux_parent_data_table() fails
clk: imx: imx8: Fix an error handling path in clk_imx_acm_attach_pm_domains()
clk: imx: Select MXC_CLK for CLK_IMX8QXP
|
|
Add documentation for the RZ/G3S CPG. The RZ/G3S CPG module is almost
identical to the one available in RZ/G2{L,UL}, the exception being some
core clocks as follows:
- The SD clock is composed of a mux and a divider, and the divider
has some limitations (div = 1 cannot be set if mux rate is 800MHz),
- There are 3 SD clocks,
- The OCTA and TSU clocks are specific to RZ/G3S,
- PLL1/4/6 are specific to RZ/G3S with its own computation formula.
Even with this RZ/G3S could use the same bindings as RZ/G2L.
Along with documentation bindings for the RZ/G3S (R9A08G045) Clock Pulse
Generator (CPG) core clocks, module clocks and resets were added.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-13-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The TRM shows there is only one AUDIOMIX PDM Root Clock Select
register, and it's called IMX8MP_CLK_AUDIOMIX_PDM_SEL. That
selector doesn't appear to have any more children and the
MICFIL driver can reference IMX8MP_CLK_AUDIOMIX_PDM_SEL
directly without the need for any other. Remove this
errant clock, since it doesn't really exist.
Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230831044431.250338-3-aford173@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|