| Age | Commit message (Collapse) | Author |
|---|
|
If I write a file to an OFS floppy image, and try to read it back on
an emulated Amiga running Workbench 1.3, the Amiga reports a disk
error trying to read the file. (That is, it's unable to read it _at
all_, even to copy it to the NIL: device. It isn't a matter of getting
the wrong data and being unable to parse the file format.)
This is because the 'sequence number' field in the OFS data block
header is supposed to be based at 1, but affs writes it based at 0.
All three locations changed by this patch were setting the sequence
number to a variable 'bidx' which was previously obtained by dividing
a file position by bsize, so bidx will naturally use 0 for the first
block. Therefore all three should add 1 to that value before writing
it into the sequence number field.
With this change, the Amiga successfully reads the file.
For data block reference: https://wiki.osdev.org/FFS_(Amiga)
Signed-off-by: Simon Tatham <anakin@pobox.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
strncpy() is deprecated for NUL-terminated destination buffers. Use
strscpy() instead and don't zero-initialize the param array.
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Running generic/751 on the for-next branch often results in a hang like
below. They are both stack by locking an extent. This suggests someone
forget to unlock an extent.
INFO: task kworker/u128:1:12 blocked for more than 323 seconds.
Not tainted 6.13.0-BTRFS-ZNS+ #503
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u128:1 state:D stack:0 pid:12 tgid:12 ppid:2 flags:0x00004000
Workqueue: btrfs-fixup btrfs_work_helper [btrfs]
Call Trace:
<TASK>
__schedule+0x534/0xdd0
schedule+0x39/0x140
__lock_extent+0x31b/0x380 [btrfs]
? __pfx_autoremove_wake_function+0x10/0x10
btrfs_writepage_fixup_worker+0xf1/0x3a0 [btrfs]
btrfs_work_helper+0xff/0x480 [btrfs]
? lock_release+0x178/0x2c0
process_one_work+0x1ee/0x570
? srso_return_thunk+0x5/0x5f
worker_thread+0x1d1/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0x10b/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
INFO: task kworker/u134:0:184 blocked for more than 323 seconds.
Not tainted 6.13.0-BTRFS-ZNS+ #503
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u134:0 state:D stack:0 pid:184 tgid:184 ppid:2 flags:0x00004000
Workqueue: writeback wb_workfn (flush-btrfs-4)
Call Trace:
<TASK>
__schedule+0x534/0xdd0
schedule+0x39/0x140
__lock_extent+0x31b/0x380 [btrfs]
? __pfx_autoremove_wake_function+0x10/0x10
find_lock_delalloc_range+0xdb/0x260 [btrfs]
writepage_delalloc+0x12f/0x500 [btrfs]
? srso_return_thunk+0x5/0x5f
extent_write_cache_pages+0x232/0x840 [btrfs]
btrfs_writepages+0x72/0x130 [btrfs]
do_writepages+0xe7/0x260
? srso_return_thunk+0x5/0x5f
? lock_acquire+0xd2/0x300
? srso_return_thunk+0x5/0x5f
? find_held_lock+0x2b/0x80
? wbc_attach_and_unlock_inode.part.0+0x102/0x250
? wbc_attach_and_unlock_inode.part.0+0x102/0x250
__writeback_single_inode+0x5c/0x4b0
writeback_sb_inodes+0x22d/0x550
__writeback_inodes_wb+0x4c/0xe0
wb_writeback+0x2f6/0x3f0
wb_workfn+0x32a/0x510
process_one_work+0x1ee/0x570
? srso_return_thunk+0x5/0x5f
worker_thread+0x1d1/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0x10b/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
This happens because we have another success path for the zoned mode. When
there is no active zone available, btrfs_reserve_extent() returns
-EAGAIN. In this case, we have two reactions.
(1) If the given range is never allocated, we can only wait for someone
to finish a zone, so wait on BTRFS_FS_NEED_ZONE_FINISH bit and retry
afterward.
(2) Or, if some allocations are already done, we must bail out and let
the caller to send IOs for the allocation. This is because these IOs
may be necessary to finish a zone.
The commit 06f364284794 ("btrfs: do proper folio cleanup when
cow_file_range() failed") moved the unlock code from the inside of the
loop to the outside. So, previously, the allocated extents are unlocked
just after the allocation and so before returning from the function.
However, they are no longer unlocked on the case (2) above. That caused
the hang issue.
Fix the issue by modifying the 'end' to the end of the allocated
range. Then, we can exit the loop and the same unlock code can properly
handle the case.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Fixes: 06f364284794 ("btrfs: do proper folio cleanup when cow_file_range() failed")
CC: stable@vger.kernel.org
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix cifs_readv_callback() to call netfs_read_subreq_terminated() rather
than queuing the subrequest work item (which is unset). Also call the
I/O progress tracepoint.
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item")
Reported-by: Jean-Christophe Guillain <jean-christophe@guillain.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219793
Tested-by: Jean-Christophe Guillain <jean-christophe@guillain.net>
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
commit b530104f50e8 ("lsm: lsm_context in security_dentry_init_security")
did not preserve the lsm id for subsequent release calls, which results
in a memory leak. Fix it by saving the lsm id in the nfs4_label and
providing it on the subsequent release call.
Fixes: b530104f50e8 ("lsm: lsm_context in security_dentry_init_security")
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- extent map shrinker fixes:
- fix potential use after free accessing an inode to reach fs_info,
the shrinker could do iput() in the meantime
- skip unnecessary scanning of inodes without extent maps
- do direct iput(), no need for indirection via workqueue
- in block < page mode, fix race when extending i_size in buffered mode
- fix minor memory leak in selftests
- print descriptive error message when seeding device is not found
* tag 'for-6.14-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix data overwriting bug during buffered write when block size < page size
btrfs: output an error message if btrfs failed to find the seed fsid
btrfs: do regular iput instead of delayed iput during extent map shrinking
btrfs: skip inodes without loaded extent maps when shrinking extent maps
btrfs: fix use-after-free on inode when scanning root during em shrinking
btrfs: selftests: fix btrfs_test_delayed_refs() leak of transaction
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Use __readahead_folio() in fuse again to fix a UAF issue
when using splice
- Remove d_op->d_delete method from pidfs
- Remove d_op->d_delete method from nsfs
- Simplify iomap_dio_bio_iter()
- Fix a UAF in ovl_dentry_update_reval
- Fix a miscalulated file range for filemap_fdatawrite_range_kick()
- Don't skip skip dirty page in folio_unmap_invalidate()
* tag 'vfs-6.14-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: Minor code simplification in iomap_dio_bio_iter()
nsfs: remove d_op->d_delete
pidfs: remove d_op->d_delete
mm/truncate: don't skip dirty page in folio_unmap_invalidate()
mm/filemap: fix miscalculated file range for filemap_fdatawrite_range_kick()
fuse: don't truncate cached, mutated symlink
ovl: fix UAF in ovl_dentry_update_reval by moving dput() in ovl_link_up
fuse: revert back to __readahead_folio() for readahead
|
|
xfs_buf_stale already set b_lru_ref to 0, and thus prevents the buffer
from moving to the LRU. Remove the duplicate check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The buffer cache keeps a bt_io_count per-CPU counter to track all
in-flight I/O, which is used to ensure no I/O is in flight when
unmounting the file system.
For most I/O we already keep track of inflight I/O at higher levels:
- for synchronous I/O (xfs_buf_read/xfs_bwrite/xfs_buf_delwri_submit),
the caller has a reference and waits for I/O completions using
xfs_buf_iowait
- for xfs_buf_delwri_submit_nowait the only caller (AIL writeback)
tracks the log items that the buffer attached to
This only leaves only xfs_buf_readahead_map as a submitter of
asynchronous I/O that is not tracked by anything else. Replace the
bt_io_count per-cpu counter with a more specific bt_readahead_count
counter only tracking readahead I/O. This allows to simply increment
it when submitting readahead I/O and decrementing it when it completed,
and thus simplify xfs_buf_rele and remove the needed for the
XBF_NO_IOACCT flags and the XFS_BSTATE_IN_FLIGHT buffer state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_buf_readahead_map is the only caller of xfs_buf_read_map and thus
_xfs_buf_read that is not synchronous. Split it from xfs_buf_read_map
so that the asynchronous path is self-contained and the now purely
synchronous xfs_buf_read_map / _xfs_buf_read implementation can be
simplified.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Currently all metadata I/O completions happen in the m_buf_workqueue
workqueue. But for synchronous I/O (i.e. all buffer reads) there is no
need for that, as there always is a called in process context that is
waiting for the I/O. Factor out the guts of xfs_buf_ioend into a
separate helper and call it from xfs_buf_iowait to avoid a double
an extra context switch to the workqueue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Combine 'else' and 'if' conditional statements onto a single line and drop
unrequired braces, as is standard coding style.
The code had been like this since commit c3b0e880bbfa ("iomap: support
REQ_OP_ZONE_APPEND").
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250224154538.548028-1-john.g.garry@oracle.com
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The sorting of VMAs by size in commit 7d442a33bfe8 ("binfmt_elf: Dump
smaller VMAs first in ELF cores") breaks elfutils[1]. Instead, sort
based on the setting of the new sysctl, core_sort_vma, which defaults
to 0, no sorting.
Reported-by: Michael Stapelberg <michael@stapelberg.ch>
Closes: https://lore.kernel.org/all/20250218085407.61126-1-michael@stapelberg.de/ [1]
Fixes: 7d442a33bfe8 ("binfmt_elf: Dump smaller VMAs first in ELF cores")
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Nsfs only deals with unhashed dentries and there's currently no way for
them to become hashed. So remove d_op->d_delete.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pidfs only deals with unhashed dentries and there's currently no way for
them to become hashed. So remove d_op->d_delete.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
syzbot reports an issue that turns out to be caused by the fact that the
efivarfs PM notifier may be invoked before the efivarfs_fs_info::sb
field is populated, resulting in a NULL deference.
So defer the registration until efivarfs_fill_super() is invoked.
Reported-by: syzbot+00d13e505ef530a45100@syzkaller.appspotmail.com
Tested-by: syzbot+00d13e505ef530a45100@syzkaller.appspotmail.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Give an afs_server object a ref on the afs_cell object it points to so that
the cell doesn't get deleted before the server record.
Whilst this is circular (cell -> vol -> server_list -> server -> cell), the
ref only pins the memory, not the lifetime as that's controlled by the
activity counter. When the volume's activity counter reaches 0, it
detaches from the cell and discards its server list; when a cell's activity
counter reaches 0, it discards its root volume. At that point, the
circularity is cut.
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250218192250.296870-6-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When allocating and building an afs_server_list struct object from a VLDB
record, we look up each server address to get the server record for it -
but a server may have more than one entry in the record and we discard the
duplicate pointers. Currently, however, when we discard, we only put a
server record, not unuse it - but the lookup got as an active-user count.
The active-user count on an afs_server_list object determines its lifetime
whereas the refcount keeps the memory backing it around. Failing to reduce
the active-user counter prevents the record from being cleaned up and can
lead to multiple copied being seen - and pointing to deleted afs_cell
objects and other such things.
Fix this by switching the incorrect 'put' to an 'unuse' instead.
Without this, occasionally, a dead server record can be seen in
/proc/net/afs/servers and list corruption may be observed:
list_del corruption. prev->next should be ffff888102423e40, but was 0000000000000000. (prev=ffff88810140cd38)
Fixes: 977e5f8ed0ab ("afs: Split the usage count on struct afs_server")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250218192250.296870-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
size
[BUG]
When running generic/418 with a btrfs whose block size < page size
(subpage cases), it always fails.
And the following minimal reproducer is more than enough to trigger it
reliably:
workload()
{
mkfs.btrfs -s 4k -f $dev > /dev/null
dmesg -C
mount $dev $mnt
$fsstree_dir/src/dio-invalidate-cache -r -b 4096 -n 3 -i 1 -f $mnt/diotest
ret=$?
umount $mnt
stop_trace
if [ $ret -ne 0 ]; then
fail
fi
}
for (( i = 0; i < 1024; i++)); do
echo "=== $i/$runtime ==="
workload
done
[CAUSE]
With extra trace printk added to the following functions:
- btrfs_buffered_write()
* Which folio is touched
* The file offset (start) where the buffered write is at
* How many bytes are copied
* The content of the write (the first 2 bytes)
- submit_one_sector()
* Which folio is touched
* The position inside the folio
* The content of the page cache (the first 2 bytes)
- pagecache_isize_extended()
* The parameters of the function itself
* The parameters of the folio_zero_range()
Which are enough to show the problem:
22.158114: btrfs_buffered_write: folio pos=0 start=0 copied=4096 content=0x0101
22.158161: submit_one_sector: r/i=5/257 folio=0 pos=0 content=0x0101
22.158609: btrfs_buffered_write: folio pos=0 start=4096 copied=4096 content=0x0101
22.158634: btrfs_buffered_write: folio pos=0 start=8192 copied=4096 content=0x0101
22.158650: pagecache_isize_extended: folio=0 from=4096 to=8192 bsize=4096 zero off=4096 len=8192
22.158682: submit_one_sector: r/i=5/257 folio=0 pos=4096 content=0x0000
22.158686: submit_one_sector: r/i=5/257 folio=0 pos=8192 content=0x0101
The tool dio-invalidate-cache will start 3 threads, each doing a buffered
write with 0x01 at offset 0, 4096 and 8192, do a fsync, then do a direct read,
and compare the read buffer with the write buffer.
Note that all 3 btrfs_buffered_write() are writing the correct 0x01 into
the page cache.
But at submit_one_sector(), at file offset 4096, the content is zeroed
out, by pagecache_isize_extended().
The race happens like this:
Thread A is writing into range [4K, 8K).
Thread B is writing into range [8K, 12k).
Thread A | Thread B
-------------------------------------+------------------------------------
btrfs_buffered_write() | btrfs_buffered_write()
|- old_isize = 4K; | |- old_isize = 4096;
|- btrfs_inode_lock() | |
|- write into folio range [4K, 8K) | |
|- pagecache_isize_extended() | |
| extend isize from 4096 to 8192 | |
| no folio_zero_range() called | |
|- btrfs_inode_lock() | |
| |- btrfs_inode_lock()
| |- write into folio range [8K, 12K)
| |- pagecache_isize_extended()
| | calling folio_zero_range(4K, 8K)
| | This is caused by the old_isize is
| | grabbed too early, without any
| | inode lock.
| |- btrfs_inode_unlock()
The @old_isize is grabbed without inode lock, causing race between two
buffered write threads and making pagecache_isize_extended() to zero
range which is still containing cached data.
And this is only affecting subpage btrfs, because for regular blocksize
== page size case, the function pagecache_isize_extended() will do
nothing if the block size >= page size.
[FIX]
Grab the old i_size while holding the inode lock.
This means each buffered write thread will have a stable view of the
old inode size, thus avoid the above race.
CC: stable@vger.kernel.org # 5.15+
Fixes: 5e8b9ef30392 ("btrfs: move pos increment and pagecache extension to btrfs_buffered_write")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
If btrfs failed to locate the seed device for whatever reason, mounting
the sprouted device will fail without any meaning error message:
# mkfs.btrfs -f /dev/test/scratch1
# btrfstune -S1 /dev/test/scratch1
# mount /dev/test/scratch1 /mnt/btrfs
# btrfs dev add -f /dev/test/scratch2 /mnt/btrfs
# umount /mnt/btrfs
# btrfs dev scan -u
# btrfs mount /dev/test/scratch2 /mnt/btrfs
mount: /mnt/btrfs: fsconfig system call failed: No such file or directory.
dmesg(1) may have more information after failed mount system call.
# dmesg -t | tail -n6
BTRFS info (device dm-5): first mount of filesystem 64252ded-5953-4868-b962-cea48f7ac4ea
BTRFS info (device dm-5): using crc32c (crc32c-generic) checksum algorithm
BTRFS info (device dm-5): using free-space-tree
BTRFS error (device dm-5): failed to read chunk tree: -2
BTRFS error (device dm-5): open_ctree failed: -2
[CAUSE]
The failure to mount is pretty straight forward, just unable to find the
seed device and its fsid, caused by `btrfs dev scan -u`.
But the lack of any useful info is a problem.
[FIX]
Just add an extra error message in open_seed_devices() to indicate the
error.
Now the error message would look like this:
BTRFS info (device dm-4): first mount of filesystem 7769223d-4db1-4e4c-ac29-0a96f53576ab
BTRFS info (device dm-4): using crc32c (crc32c-generic) checksum algorithm
BTRFS info (device dm-4): using free-space-tree
BTRFS error (device dm-4): failed to find fsid e87c12e6-584b-4e98-8b88-962c33a619ff when attempting to open seed devices
BTRFS error (device dm-4): failed to read chunk tree: -2
BTRFS error (device dm-4): open_ctree failed: -2
Link: https://github.com/kdave/btrfs-progs/issues/959
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The extent map shrinker now runs in the system unbound workqueue and no
longer in kswapd context so it can directly do an iput() on inodes even
if that blocks or needs to acquire any lock (we aren't holding any locks
when requesting the delayed iput from the shrinker). So we don't need to
add a delayed iput, wake up the cleaner and delegate the iput() to the
cleaner, which also adds extra contention on the spinlock that protects
the delayed iputs list.
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Tested-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/0414d690ac5680d0d77dfc930606cdc36e42e12f.camel@intelfx.name/
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If there are inodes that don't have any loaded extent maps, we end up
grabbing a reference on them and later adding a delayed iput, which wakes
up the cleaner and makes it do unnecessary work. This is common when for
example the inodes were open only to run stat(2) or all their extent maps
were already released through the folio release callback
(btrfs_release_folio()) or released by a previous run of the shrinker, or
directories which never have extent maps.
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Tested-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/0414d690ac5680d0d77dfc930606cdc36e42e12f.camel@intelfx.name/
CC: stable@vger.kernel.org # 6.13+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_scan_root() we are accessing the inode's root (and fs_info) in a
call to btrfs_fs_closing() after we have scheduled the inode for a delayed
iput, and that can result in a use-after-free on the inode in case the
cleaner kthread does the iput before we dereference the inode in the call
to btrfs_fs_closing().
Fix this by using the fs_info stored already in a local variable instead
of doing inode->root->fs_info.
Fixes: 102044384056 ("btrfs: make the extent map shrinker run asynchronously as a work queue job")
CC: stable@vger.kernel.org # 6.13+
Tested-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/0414d690ac5680d0d77dfc930606cdc36e42e12f.camel@intelfx.name/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The fix alone doesn't fix [1], but should be applied before debugging
that.
[1] https://syzkaller.appspot.com/bug?extid=38a0cbd267eff2d286ff
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
"nonce inconstancy" is popping up again, causing us to go emergency
read-only.
This one looks less serious, i.e. specific to the encryption path and
not indicative of a data corruption bug. But we'll need more info to
track it down.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add check for the return value of cifs_buf_get() and cifs_small_buf_get()
in receive_encrypted_standard() to prevent null pointer dereference.
Fixes: eec04ea11969 ("smb: client: fix OOB in receive_encrypted_standard()")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull smb client fixes from Steve French:
- Fix for chmod regression
- Two reparse point related fixes
- One minor cleanup (for GCC 14 compiles)
- Fix for SMB3.1.1 POSIX Extensions reporting incorrect file type
* tag 'v6.14-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Treat unhandled directory name surrogate reparse points as mount directory nodes
cifs: Throw -EOPNOTSUPP error on unsupported reparse point type from parse_reparse_point()
smb311: failure to open files of length 1040 when mounting with SMB3.1.1 POSIX extensions
smb: client, common: Avoid multiple -Wflex-array-member-not-at-end warnings
smb: client: fix chmod(2) regression with ATTR_READONLY
|
|
Pull bcachefs fixes from Kent Overstreet:
"Small stuff:
- The fsck code for Hongbo's directory i_size patch was wrong, caught
by transaction restart injection: we now have the CI running
another test variant with restart injection enabled
- Another fixup for reflink pointers to missing indirect extents:
previous fix was for fsck code, this fixes the normal runtime paths
- Another small srcu lock hold time fix, reported by jpsollie"
* tag 'bcachefs-2025-02-20' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix srcu lock warning in btree_update_nodes_written()
bcachefs: Fix bch2_indirect_extent_missing_error()
bcachefs: Fix fsck directory i_size checking
|
|
Pull xfs fixes from Carlos Maiolino:
"Just a collection of bug fixes, nothing really stands out"
* tag 'xfs-fixes-6.14-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: flush inodegc before swapon
xfs: rename xfs_iomap_swapfile_activate to xfs_vm_swap_activate
xfs: Do not allow norecovery mount with quotacheck
xfs: do not check NEEDSREPAIR if ro,norecovery mount.
xfs: fix data fork format filtering during inode repair
xfs: fix online repair probing when CONFIG_XFS_ONLINE_REPAIR=n
|
|
Fuse allows the value of a symlink to change and this property is exploited
by some filesystems (e.g. CVMFS).
It has been observed, that sometimes after changing the symlink contents,
the value is truncated to the old size.
This is caused by fuse_getattr() racing with fuse_reverse_inval_inode().
fuse_reverse_inval_inode() updates the fuse_inode's attr_version, which
results in fuse_change_attributes() exiting before updating the cached
attributes
This is okay, as the cached attributes remain invalid and the next call to
fuse_change_attributes() will likely update the inode with the correct
values.
The reason this causes problems is that cached symlinks will be
returned through page_get_link(), which truncates the symlink to
inode->i_size. This is correct for filesystems that don't mutate
symlinks, but in this case it causes bad behavior.
The solution is to just remove this truncation. This can cause a
regression in a filesystem that relies on supplying a symlink larger than
the file size, but this is unlikely. If that happens we'd need to make
this behavior conditional.
Reported-by: Laura Promberger <laura.promberger@cern.ch>
Tested-by: Sam Lewis <samclewis@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250220100258.793363-1-mszeredi@redhat.com
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"18 hotfixes. 5 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
10 are for MM and 8 are for non-MM. All are singletons, please see the
changelogs for details"
* tag 'mm-hotfixes-stable-2025-02-19-17-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
test_xarray: fix failure in check_pause when CONFIG_XARRAY_MULTI is not defined
kasan: don't call find_vm_area() in a PREEMPT_RT kernel
MAINTAINERS: update Nick's contact info
selftests/mm: fix check for running THP tests
mm: hugetlb: avoid fallback for specific node allocation of 1G pages
memcg: avoid dead loop when setting memory.max
mailmap: update Nick's entry
mm: pgtable: fix incorrect reclaim of non-empty PTE pages
taskstats: modify taskstats version
getdelays: fix error format characters
mm/migrate_device: don't add folio to be freed to LRU in migrate_device_finalize()
tools/mm: fix build warnings with musl-libc
mailmap: add entry for Feng Tang
.mailmap: add entries for Jeff Johnson
mm,madvise,hugetlb: check for 0-length range after end address adjustment
mm/zswap: fix inconsistency when zswap_store_page() fails
lib/iov_iter: fix import_iovec_ubuf iovec management
procfs: fix a locking bug in a vmcore_add_device_dump() error path
|
|
We don't want to be holding the srcu lock while waiting on btree write
completions - easily fixed.
Reported-by: Janpieter Sollie <janpieter.sollie@edpnet.be>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We had some error handling confusion here;
-BCH_ERR_missing_indirect_extent is thrown by
trans_trigger_reflink_p_segment(); at this point we haven't decide
whether we're generating an error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If the file is sillyrenamed, and slated for delete on close, it is
possible for a server reboot to triggeer an open reclaim, with can again
race with the application call to close(). When that happens, the call
to put_nfs_open_context() can trigger a synchronous delegreturn call
which deadlocks because it is not marked as privileged.
Instead, ensure that the call to nfs4_inode_return_delegation_on_close()
catches the delegreturn, and schedules it asynchronously.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Fixes: adb4b42d19ae ("Return the delegation when deleting sillyrenamed files")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Adjust the timestamps if O_DIRECT is being combined with attribute
delegations.
Fixes: e12912d94137 ("NFSv4: Add support for delegated atime and mtime attributes")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
While it is uncommon for delegations to be held while O_DIRECT writes
are in progress, it is possible. The xfstests generic/647 and
generic/729 both end up triggering that state, and end up failing due to
the fact that the file size is not adjusted.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219738
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Error handling was wrong, causing unhandled transaction restart errors.
check_directory_size() was also inefficient, since keys in multiple
snapshots would be iterated over once for every snapshot. Convert it to
the same scheme used for i_sectors and subdir count checking.
Cc: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The issue was caused by dput(upper) being called before
ovl_dentry_update_reval(), while upper->d_flags was still
accessed in ovl_dentry_remote().
Move dput(upper) after its last use to prevent use-after-free.
BUG: KASAN: slab-use-after-free in ovl_dentry_remote fs/overlayfs/util.c:162 [inline]
BUG: KASAN: slab-use-after-free in ovl_dentry_update_reval+0xd2/0xf0 fs/overlayfs/util.c:167
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
ovl_dentry_remote fs/overlayfs/util.c:162 [inline]
ovl_dentry_update_reval+0xd2/0xf0 fs/overlayfs/util.c:167
ovl_link_up fs/overlayfs/copy_up.c:610 [inline]
ovl_copy_up_one+0x2105/0x3490 fs/overlayfs/copy_up.c:1170
ovl_copy_up_flags+0x18d/0x200 fs/overlayfs/copy_up.c:1223
ovl_rename+0x39e/0x18c0 fs/overlayfs/dir.c:1136
vfs_rename+0xf84/0x20a0 fs/namei.c:4893
...
</TASK>
Fixes: b07d5cc93e1b ("ovl: update of dentry revalidate flags after copy up")
Reported-by: syzbot+316db8a1191938280eb6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=316db8a1191938280eb6
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20250214215148.761147-1-kovalev@altlinux.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
directory nodes
If the reparse point was not handled (indicated by the -EOPNOTSUPP from
ops->parse_reparse_point() call) but reparse tag is of type name surrogate
directory type, then treat is as a new mount point.
Name surrogate reparse point represents another named entity in the system.
From SMB client point of view, this another entity is resolved on the SMB
server, and server serves its content automatically. Therefore from Linux
client point of view, this name surrogate reparse point of directory type
crosses mount point.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
parse_reparse_point()
This would help to track and detect by caller if the reparse point type was
processed or not.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
POSIX extensions
If a file size has bits 0x410 = ATTR_DIRECTORY | ATTR_REPARSE set
then during queryinfo (stat) the file is regarded as a directory
and subsequent opens can fail. A simple test example is trying
to open any file 1040 bytes long when mounting with "posix"
(SMB3.1.1 POSIX/Linux Extensions).
The cause of this bug is that Attributes field in smb2_file_all_info
struct occupies the same place that EndOfFile field in
smb311_posix_qinfo, and sometimes the latter struct is incorrectly
processed as if it was the first one.
Reported-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Tested-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with flexible-array members in the
middle of other structs, we use the `__struct_group()` helper to
separate the flexible arrays from the rest of the members in the
flexible structures. We then use the newly created tagged `struct
smb2_file_link_info_hdr` and `struct smb2_file_rename_info_hdr`
to replace the type of the objects causing trouble: `rename_info`
and `link_info` in `struct smb2_compound_vars`.
We also want to ensure that when new members need to be added to the
flexible structures, they are always included within the newly created
tagged structs. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
So, with these changes, fix 86 of the following warnings:
fs/smb/client/cifsglob.h:2335:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
fs/smb/client/cifsglob.h:2334:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
This contains a fix for fuse readahead.
* tag 'fuse-fixes-6.14-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: revert back to __readahead_folio() for readahead
Link: https://lore.kernel.org/r/CAJfpegv=+M4hy=hfBKEgBN8vfWULWT9ApbQzCnPopnMqyjpkzA@mail.gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Unlock vmcore_mutex when returning -EBUSY.
Link: https://lkml.kernel.org/r/20250129222003.1495713-1-bvanassche@acm.org
Fixes: 0f3b1c40c652 ("fs/proc/vmcore: disallow vmcore modifications while the vmcore is open")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan he <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"It was reported that the acct(2) system call can be used to trigger a
NULL deref in cases where it is set to write to a file that triggers
an internal lookup.
This can e.g., happen when pointing acct(2) to /sys/power/resume. At
the point the where the write to this file happens the calling task
has already exited and called exit_fs() but an internal lookup might
be triggered through lookup_bdev(). This may trigger a NULL-deref when
accessing current->fs.
Reorganize the code so that the the final write happens from the
workqueue but with the caller's credentials. This preserves the
(strange) permission model and has almost no regression risk.
Also block access to kernel internal filesystems as well as procfs and
sysfs in the first place.
Various fixes for netfslib:
- Fix a number of read-retry hangs, including:
- Incorrect getting/putting of references on subreqs as we retry
them
- Failure to track whether a last old subrequest in a retried set
is superfluous
- Inconsistency in the usage of wait queues used for subrequests
(ie. using clear_and_wake_up_bit() whilst waiting on a private
waitqueue)
- Add stats counters for retries and publish in /proc/fs/netfs/stats.
This is not a fix per se, but is useful in debugging and shouldn't
otherwise change the operation of the code
- Fix the ordering of queuing subrequests with respect to setting the
request flag that says we've now queued them all"
* tag 'vfs-6.14-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix setting NETFS_RREQ_ALL_QUEUED to be after all subreqs queued
netfs: Add retry stat counters
netfs: Fix a number of read-retry hangs
acct: block access to kernel internal filesystems
acct: perform last write from workqueue
|
|
The btrfs_transaction struct leaks, which can cause sporadic fstests
failures when kmemleak checking is enabled:
kmemleak: 5 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
> cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff88810fdc6c00 (size 512):
comm "modprobe", pid 203, jiffies 4294892552
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 6736050f):
__kmalloc_cache_noprof+0x133/0x2c0
btrfs_test_delayed_refs+0x6f/0xbb0 [btrfs]
btrfs_run_sanity_tests.cold+0x91/0xf9 [btrfs]
0xffffffffa02fd055
do_one_initcall+0x49/0x1c0
do_init_module+0x5b/0x1f0
init_module_from_file+0x70/0x90
idempotent_init_module+0xe8/0x2c0
__x64_sys_finit_module+0x6b/0xd0
do_syscall_64+0x54/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The transaction struct was initially stack-allocated but switched to
heap following frame size compiler warnings.
Fixes: 2b34879d97e27 ("btrfs: selftests: add delayed ref self test cases")
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When the user sets a file or directory as read-only (e.g. ~S_IWUGO),
the client will set the ATTR_READONLY attribute by sending an
SMB2_SET_INFO request to the server in cifs_setattr_{,nounix}(), but
cifsInodeInfo::cifsAttrs will be left unchanged as the client will
only update the new file attributes in the next call to
{smb311_posix,cifs}_get_inode_info() with the new metadata filled in
@data parameter.
Commit a18280e7fdea ("smb: cilent: set reparse mount points as
automounts") mistakenly removed the @data NULL check when calling
is_inode_cache_good(), which broke the above case as the new
ATTR_READONLY attribute would end up not being updated on files with a
read lease.
Fix this by updating the inode whenever we have cached metadata in
@data parameter.
Reported-by: Horst Reiterer <horst.reiterer@fabasoft.com>
Closes: https://lore.kernel.org/r/85a16504e09147a195ac0aac1c801280@fabasoft.com
Fixes: a18280e7fdea ("smb: cilent: set reparse mount points as automounts")
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull smb client fix from Steve French:
"SMB3 client multichannel fix"
* tag 'v6.14-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: pick channels for individual subrequests
|
|
In commit 3eab9d7bc2f4 ("fuse: convert readahead to use folios"), the
logic was converted to using the new folio readahead code, which drops
the reference on the folio once it is locked, using an inferred
reference on the folio. Previously we held a reference on the folio for
the entire duration of the readpages call.
This is fine, however for the case for splice pipe responses where we
will remove the old folio and splice in the new folio (see
fuse_try_move_page()), we assume that there is a reference held on the
folio for ap->folios, which is no longer the case.
To fix this, revert back to __readahead_folio() which allows us to hold
the reference on the folio for the duration of readpages until either we
drop the reference ourselves in fuse_readpages_end() or the reference is
dropped after it's replaced in the page cache in the splice case.
This will fix the UAF bug that was reported.
Link: https://lore.kernel.org/linux-fsdevel/2f681f48-00f5-4e09-8431-2b3dbfaa881e@heusel.eu/
Fixes: 3eab9d7bc2f4 ("fuse: convert readahead to use folios")
Reported-by: Christian Heusel <christian@heusel.eu>
Closes: https://lore.kernel.org/all/2f681f48-00f5-4e09-8431-2b3dbfaa881e@heusel.eu/
Closes: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/110
Reported-by: Mantas Mikulėnas <grawity@gmail.com>
Closes: https://lore.kernel.org/all/34feb867-09e2-46e4-aa31-d9660a806d1a@gmail.com/
Closes: https://bugzilla.opensuse.org/show_bug.cgi?id=1236660
Cc: <stable@vger.kernel.org> # v6.13
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
