| Age | Commit message (Collapse) | Author |
|---|
|
The copygc code itself now calls this when all moves from a given bucket
are complete.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This isn't a real error, and doesn't need to be printed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Now, any open_bucket can go on the partial list: allocating from the
partial list has been moved to its own dedicated function,
open_bucket_add_bucets() -> bucket_alloc_set_partial().
In particular, this means that erasure coded buckets can safely go on
the partial list; the new location works with the "allocate an ec bucket
first, then the rest" logic.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
fstest generic/388 occasionally reproduces corruptions where an
inode has extents beyond i_size. This is a deliberate crash and
recovery test, and the post crash+recovery characteristics are
usually the same: the inode exists on disk in an early (i.e. just
allocated) state based on the journal sequence number associated
with the inode. Subsequent inode updates exist in the journal at
higher sequence numbers, but the inode hadn't been written back
before the associated crash and the post-crash recovery processes a
set of journal sequence numbers that doesn't include updates to the
inode. In fact, the sequence with the most recent inode key update
always happens to be the sequence just before the front of the
journal processed by recovery.
This last bit is a significant hint that the problem relates to an
on-disk journal update of the front of the journal. The root cause
of this problem is basically that the inode is updated (multiple
times) in-core and in the key cache, each time bumping the key cache
sequence number used to control the cache flush. The cache flush
skips one or more times, bumping the associated key cache journal
pin to the key cache seq value. This has a side effect of holding
the inode in memory a bit longer than normal, which helps exacerbate
this problem, but is also unsafe in certain cases where the key
cache seq may have been updated by a transaction commit that didn't
journal the associated key.
For example, consider an inode that has been allocated, updated
several times in the key cache, journaled, but not yet written back.
At this stage, everything should be consistent if the fs happens to
crash because the latest update has been journal. Now consider a key
update via bch2_extent_update_i_size_sectors() that uses the
BTREE_UPDATE_NOJOURNAL flag. While this update may not change inode
state, it can have the side effect of bumping ck->seq in
bch2_btree_insert_key_cached(). In turn, if a subsequent key cache
flush skips due to seq not matching the former, the ck->journal pin
is updated to ck->seq even though the most recent key update was not
journaled. If this pin happens to reside at the front (tail) of the
journal, this means a subsequent journal write can update last_seq
to a value beyond that which includes the most recent update to the
inode. If this occurs and the fs happens to crash before the inode
happens to flush, recovery will see the latest last_seq, fail to
recover the inode and leave the inode in the inconsistent state
described above.
To avoid this problem, skip the key cache seq update on NOJOURNAL
commits, except on initial pin add. Pass the insert entry directly
to bch2_btree_insert_key_cached() to make the associated flag
available and be consistent with btree_insert_key_leaf().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This is a workaround for a lost wakeup bug we've been seeing - we still
need to discover the actual bug.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- Fix a sleeping-in-atomic bug due to calling
bch2_journal_buckets_to_sb() under the journal lock.
- Additionally, now we mark buckets as journal buckets before adding
them to the journal in memory and the superblock. This ensures that
if we crash part way through we'll never be writing to journal
buckets that aren't marked correctly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Minor refactoring for the Rust interface.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pulling out a helper from cmd_list.c, as the rest is being rewritten in
Rust but we're not ready to rewrite lower-level btree code in Rust.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This is for the Rust interface - Rust cares more about const than C
does.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This improves copygc pipelining across multiple buckets: we now track
each in flight bucket we're evacuating, with separate moving_contexts.
This means that whereas previously we had to wait for outstanding moves
to complete to ensure we didn't try to evacuate the same bucket twice,
we can now just check buckets we want to evacuate against the pending
list.
This also mean we can run the verify_bucket_evacuated() check without
killing pipelining - meaning it can now always be enabled, not just on
debug builds.
This is going to be important for the upcoming erasure coding work,
where moving IOs that are being erasure coded will now skip the initial
replication step; instead the IOs will wait on the stripe to complete.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It's possible that we reuse a stripe that doesn't have quite the same
configuration as the stripe_head we're allocating from. In that case, we
have to make sure that the new stripe uses the settings from the stripe
we resue, not the stripe head, and make sure the buffer is allocated
correctly.
This fixes the ec_mixed_tiers test.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Rust bindgen doesn't cope well with anonymous structs and unions. This
patch drops the fancy anonymous structs & unions in bkey_i that let us
use the same helpers for bkey_i and bkey_packed; since bkey_packed is an
internal type that's never exposed to outside code, it's only a minor
inconvenienc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Rust bindgen doesn't do anonymous structs very nicely: BKEY_PADDED()
only needs the anonymous struct when it's used on the stack, to
guarantee layout, not when it's embedded in another struct.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Rework stripe creation path - new algorithm for deciding when to create
new stripes or reuse existing stripes.
We add a new allocation watermark, RESERVE_stripe, above RESERVE_none.
Then we always try to create a new stripe by doing RESERVE_stripe
allocations; if this fails, we reuse an existing stripe and allocate
buckets for it with the reserve watermark for the given write
(RESERVE_none or RESERVE_movinggc).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Currently, we don't use bucket data type for tracking whether buckets
are part of a stripe; parity buckets are BCH_DATA_parity, but data
buckets in a stripe are BCH_DATA_user. There's a separate counter,
buckets_ec, outside the BCH_DATA_TYPES system for tracking number of
buckets on a device that are part of a stripe.
The trouble with this approach is that it's too coarse grained, and we
need better information on fragmentation for debugging copygc.
With this patch, data buckets in a stripe are now tracked as
BCH_DATA_stripe buckets.
This doesn't yet differentiate between erasure coded and non-erasure
coded data in a stripe bucket, nor do we yet track empty data buckets in
stripes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes some confusion in the lockdep code due to initializing btree
node/key cache locks with the same lockdep key, but different names.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Soon, __bch2_btree_node_write() is going to require a btree_trans: zoned
device support is going to require a new allocation for every btree node
write. This is a bit of prep work.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Now we also print the number of buckets reserved for each watermark.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btree & level are passed to trans_mark - for backpointers -
bch2_mark_key() should take them as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Factor out a common helper
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes a use-after-free bug.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Rust bindgen doesn't handle macros, but it does handle integer
constants: this conversion aids in implementing safe Rust wrapper
interfaces.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Needed for interfacing with Rust - bindgen can't handle inline
functions, alas.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Occasionally, we won't write to an entire bucket. This fixes the EC code
to handle this case, zeroing out the rest of the bucket as needed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Convert to use the standard helper
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It's possible for bch2_write_buffer_flush_one() to end up with a shared
path, if called from a context that already has a btree iterator
pointing to a key being flushed. We have to be careful when that
happens, since we can't clone a path that holds write locks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We now print pointers as bucket:offset, the same as how we print extent
pointers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds an option for completely disabling nocow mode, including the
locking in the data move path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Print bucket in dev:bucket notation, to be consistent with how we refer
to buckets elsewhere.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Another nested btree_trans fix
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It's possible when shutting down to for a stripe head to have a new
stripe that doesn't yet have any blocks allocated - we just need to free
it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
