| Age | Commit message (Collapse) | Author |
|---|
|
Current handle_read_error() function calls fix_read_error()
only if md device is RW and rdev does not include FailFast flag.
It does not handle a read error from a RW device including
FailFast flag.
I am not sure it is intended. But I found that write IO error
sets rdev faulty. The md module should handle the read IO error and
write IO error equally. So I think read IO error should set rdev faulty.
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
We met NULL pointer BUG as follow:
[ 151.760358] BUG: unable to handle kernel NULL pointer dereference at 0000000000000060
[ 151.761340] PGD 80000001011eb067 P4D 80000001011eb067 PUD 1011ea067 PMD 0
[ 151.762039] Oops: 0000 [#1] SMP PTI
[ 151.762406] Modules linked in:
[ 151.762723] CPU: 2 PID: 3561 Comm: mdadm-test Kdump: loaded Not tainted 4.17.0-rc1+ #238
[ 151.763542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014
[ 151.764432] RIP: 0010:remove_and_add_spares.part.56+0x13c/0x3a0
[ 151.765061] RSP: 0018:ffffc90001d7fcd8 EFLAGS: 00010246
[ 151.765590] RAX: 0000000000000000 RBX: ffff88013601d600 RCX: 0000000000000000
[ 151.766306] RDX: 0000000000000000 RSI: ffff88013601d600 RDI: ffff880136187000
[ 151.767014] RBP: ffff880136187018 R08: 0000000000000003 R09: 0000000000000051
[ 151.767728] R10: ffffc90001d7fed8 R11: 0000000000000000 R12: ffff88013601d600
[ 151.768447] R13: ffff8801298b1300 R14: ffff880136187000 R15: 0000000000000000
[ 151.769160] FS: 00007f2624276700(0000) GS:ffff88013ae80000(0000) knlGS:0000000000000000
[ 151.769971] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 151.770554] CR2: 0000000000000060 CR3: 0000000111aac000 CR4: 00000000000006e0
[ 151.771272] Call Trace:
[ 151.771542] md_ioctl+0x1df2/0x1e10
[ 151.771906] ? __switch_to+0x129/0x440
[ 151.772295] ? __schedule+0x244/0x850
[ 151.772672] blkdev_ioctl+0x4bd/0x970
[ 151.773048] block_ioctl+0x39/0x40
[ 151.773402] do_vfs_ioctl+0xa4/0x610
[ 151.773770] ? dput.part.23+0x87/0x100
[ 151.774151] ksys_ioctl+0x70/0x80
[ 151.774493] __x64_sys_ioctl+0x16/0x20
[ 151.774877] do_syscall_64+0x5b/0x180
[ 151.775258] entry_SYSCALL_64_after_hwframe+0x44/0xa9
For raid6, when two disk of the array are offline, two spare disks can
be added into the array. Before spare disks recovery completing,
system reboot and mdadm thinks it is ok to restart the degraded
array by md_ioctl(). Since disks in raid6 is not only_parity(),
raid5_run() will abort, when there is no PPL feature or not setting
'start_dirty_degraded' parameter. Therefore, mddev->pers is NULL.
But, mddev->raid_disks has been set and it will not be cleared when
raid5_run abort. md_ioctl() can execute cmd 'HOT_REMOVE_DISK' to
remove a disk by mdadm, which will cause NULL pointer dereference
in remove_and_add_spares() finally.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
Store write hint from original bio in stripe head so it can be assigned
to bio sent to each RAID device.
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
If "re-add" is written to the "state" file for a device
which is faulty, this has an effect similar to removing
and re-adding the device. It should take up the
same slot in the array that it previously had, and
an accelerated (e.g. bitmap-based) rebuild should happen.
The slot that "it previously had" is determined by
rdev->saved_raid_disk.
However this is not set when a device fails (only when a device
is added), and it is cleared when resync completes.
This means that "re-add" will normally work once, but may not work a
second time.
This patch includes two fixes.
1/ when a device fails, record the ->raid_disk value in
->saved_raid_disk before clearing ->raid_disk
2/ when "re-add" is written to a device for which
->saved_raid_disk is not set, fail.
I think this is suitable for stable as it can
cause re-adding a device to be forced to do a full
resync which takes a lot longer and so puts data at
more risk.
Cc: <stable@vger.kernel.org> (v4.1)
Fixes: 97f6cd39da22 ("md-cluster: re-add capabilities")
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
For recovery case, r10buf_pool_alloc only allocates 2 bios,
so we can't access more than 2 bios in r10buf_pool_free.
Otherwise, we can see NULL pointer dereference as follows:
[ 98.347009] BUG: unable to handle kernel NULL pointer dereference
at 0000000000000050
[ 98.355783] IP: r10buf_pool_free+0x38/0xe0 [raid10]
[...]
[ 98.543734] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 98.550161] CR2: 0000000000000050 CR3: 000000089500a001 CR4: 00000000001606f0
[ 98.558145] Call Trace:
[ 98.560881] <IRQ>
[ 98.563136] put_buf+0x19/0x20 [raid10]
[ 98.567426] end_sync_request+0x6b/0x70 [raid10]
[ 98.572591] end_sync_write+0x9b/0x160 [raid10]
[ 98.577662] blk_update_request+0x78/0x2c0
[ 98.582254] scsi_end_request+0x2c/0x1e0 [scsi_mod]
[ 98.587719] scsi_io_completion+0x22f/0x610 [scsi_mod]
[ 98.593472] blk_done_softirq+0x8e/0xc0
[ 98.597767] __do_softirq+0xde/0x2b3
[ 98.601770] irq_exit+0xae/0xb0
[ 98.605285] do_IRQ+0x81/0xd0
[ 98.608606] common_interrupt+0x7d/0x7d
[ 98.612898] </IRQ>
So we need to check the bio is valid or not before the bio is
used in r10buf_pool_free. Another workable way is to free 2 bios
for recovery case just like r10buf_pool_alloc.
Fixes: f0250618361d ("md: raid10: don't use bio's vec table to manage resync pages")
Reported-by: Alexis Castilla <pencerval@gmail.com>
Tested-by: Alexis Castilla <pencerval@gmail.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC host fixes:
- sdhci-pci: Fixup tuning for AMD for eMMC HS200 mode
- renesas_sdhi_internal_dmac: Avoid data corruption by limiting
DMA RX"
* tag 'mmc-v4.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCs
mmc: sdhci-pci: Only do AMD tuning for HS200
|
|
Pull MD fixes from Shaohua Li:
"Three small fixes for MD:
- md-cluster fix for faulty device from Guoqing
- writehint fix for writebehind IO for raid1 from Mariusz
- a live lock fix for interrupted recovery from Yufen"
* tag 'md/4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
raid1: copy write hint from master bio to behind bio
md/raid1: exit sync request if MD_RECOVERY_INTR is set
md-cluster: don't update recovery_offset for faulty device
|
|
Pull networking fixes from David Miller:
1) Unbalanced refcounting in TIPC, from Jon Maloy.
2) Only allow TCP_MD5SIG to be set on sockets in close or listen state.
Once the connection is established it makes no sense to change this.
From Eric Dumazet.
3) Missing attribute validation in neigh_dump_table(), also from Eric
Dumazet.
4) Fix address comparisons in SCTP, from Xin Long.
5) Neigh proxy table clearing can deadlock, from Wolfgang Bumiller.
6) Fix tunnel refcounting in l2tp, from Guillaume Nault.
7) Fix double list insert in team driver, from Paolo Abeni.
8) af_vsock.ko module was accidently made unremovable, from Stefan
Hajnoczi.
9) Fix reference to freed llc_sap object in llc stack, from Cong Wang.
10) Don't assume netdevice struct is DMA'able memory in virtio_net
driver, from Michael S. Tsirkin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
net/smc: fix shutdown in state SMC_LISTEN
bnxt_en: Fix memory fault in bnxt_ethtool_init()
virtio_net: sparse annotation fix
virtio_net: fix adding vids on big-endian
virtio_net: split out ctrl buffer
net: hns: Avoid action name truncation
docs: ip-sysctl.txt: fix name of some ipv6 variables
vmxnet3: fix incorrect dereference when rxvlan is disabled
llc: hold llc_sap before release_sock()
MAINTAINERS: Direct networking documentation changes to netdev
atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit"
net: qmi_wwan: add Wistron Neweb D19Q1
net: caif: fix spelling mistake "UKNOWN" -> "UNKNOWN"
net: stmmac: Disable ACS Feature for GMAC >= 4
net: mvpp2: Fix DMA address mask size
net: change the comment of dev_mc_init
net: qualcomm: rmnet: Fix warning seen with fill_info
tun: fix vlan packet truncation
tipc: fix infinite loop when dumping link monitor summary
tipc: fix use-after-free in tipc_nametbl_stop
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
- suspend/resume handling fix for Raydium I2C-connected touchscreen
from Aaron Ma
- protocol fixup for certain BT-connected Wacoms from Aaron Armstrong
Skomra
- battery level reporting fix on BT-connected mice from Dmitry Torokhov
- hidraw race condition fix from Rodrigo Rivas Costa
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: i2c-hid: fix inverted return value from i2c_hid_command()
HID: i2c-hid: Fix resume issue on Raydium touchscreen device
HID: wacom: bluetooth: send exit report for recent Bluetooth devices
HID: hidraw: Fix crash on HIDIOCGFEATURE with a destroyed device
HID: input: fix battery level reporting on BT mice
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- some fixes of kmalloc() flags
- one fix of the xenbus driver
- an update of the pv sound driver interface needed for a driver which
will go through the sound tree
* tag 'for-linus-4.17-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: xenbus_dev_frontend: Really return response string
xen/sndif: Sync up with the canonical definition in Xen
xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_reg_add
xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in xen_pcibk_config_quirks_init
xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_device_alloc
xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_init_device
xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes and kexec-file-load from Martin Schwidefsky:
"After the common code kexec patches went in via Andrew we can now push
the architecture parts to implement the kexec-file-load system call.
Plus a few more bug fixes and cleanups, this includes an update to the
default configurations"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/signal: cleanup uapi struct sigaction
s390: rename default_defconfig to debug_defconfig
s390: remove gcov defconfig
s390: update defconfig
s390: add support for IBM z14 Model ZR1
s390: remove couple of duplicate includes
s390/boot: remove unused COMPILE_VERSION and ccflags-y
s390/nospec: include cpu.h
s390/decompressor: Ignore file vmlinux.bin.full
s390/kexec_file: add generated files to .gitignore
s390/Kconfig: Move kexec config options to "Processor type and features"
s390/kexec_file: Add ELF loader
s390/kexec_file: Add crash support to image loader
s390/kexec_file: Add image loader
s390/kexec_file: Add kexec_file_load system call
s390/kexec_file: Add purgatory
s390/kexec_file: Prepare setup.h for kexec_file_load
s390/smsgiucv: disable SMSG on module unload
s390/sclp: avoid potential usage of uninitialized value
|
|
In some firmware images, the length of BNX_DIR_TYPE_PKG_LOG nvram type
could be greater than the fixed buffer length of 4096 bytes allocated by
the driver. This was causing HWRM_NVM_READ to copy more data to the buffer
than the allocated size, causing general protection fault.
Fix the issue by allocating the exact buffer length returned by
HWRM_NVM_FIND_DIR_ENTRY, instead of 4096. Move the kzalloc() call
into the bnxt_get_pkgver() function.
Fixes: 3ebf6f0a09a2 ("bnxt_en: Add installed-package firmware version reporting via Ethtool GDRVINFO")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
offloads is a buffer in virtio format, should use
the __virtio64 tag.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Programming vids (adding or removing them) still passes
guest-endian values in the DMA buffer. That's wrong
if guest is big-endian and when virtio 1 is enabled.
Note: this is on top of a previous patch:
virtio_net: split out ctrl buffer
Fixes: 9465a7a6f ("virtio_net: enable v1.0 support")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When sending control commands, virtio net sets up several buffers for
DMA. The buffers are all part of the net device which means it's
actually allocated by kvmalloc so it's in theory (on extreme memory
pressure) possible to get a vmalloc'ed buffer which on some platforms
means we can't DMA there.
Fix up by moving the DMA buffers into a separate structure.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When longer interface names are used, the action names exposed in
/proc/interrupts and /proc/irq/* maybe truncated. For example, when
using the predictable name algorithm in systemd on a HiSilicon D05,
I see:
ubuntu@d05-3:~$ grep enahisic2i0-tx /proc/interrupts | sed 's/.* //'
enahisic2i0-tx0
enahisic2i0-tx1
[...]
enahisic2i0-tx8
enahisic2i0-tx9
enahisic2i0-tx1
enahisic2i0-tx1
enahisic2i0-tx1
enahisic2i0-tx1
enahisic2i0-tx1
enahisic2i0-tx1
Increase the max ring name length to allow for an interface name
of IFNAMSIZE. After this change, I now see:
$ grep enahisic2i0-tx /proc/interrupts | sed 's/.* //'
enahisic2i0-tx0
enahisic2i0-tx1
enahisic2i0-tx2
[...]
enahisic2i0-tx8
enahisic2i0-tx9
enahisic2i0-tx10
enahisic2i0-tx11
enahisic2i0-tx12
enahisic2i0-tx13
enahisic2i0-tx14
enahisic2i0-tx15
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
vmxnet3_get_hdr_len() is used to calculate the header length which in
turn is used to calculate the gso_size for skb. When rxvlan offload is
disabled, vlan tag is present in the header and the function references
ip header from sizeof(ethhdr) and leads to incorrect pointer reference.
This patch fixes this issue by taking sizeof(vlan_ethhdr) into account
if vlan tag is present and correctly references the ip hdr.
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Acked-by: Louis Luo <llouis@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Trivial fix to spelling mistake in message text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This modem is embedded on dlink dwr-960 router.
The oem configuration states:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1435 ProdID=d191 Rev=ff.ff
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
Tested on openwrt distribution
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ACS Feature is currently enabled for GMAC >= 4 but the llc_snap status
is never checked in descriptor rx_status callback. This will cause
stmmac to always strip packets even that ACS feature is already
stripping them.
Lets be safe and disable the ACS feature for GMAC >= 4 and always strip
the packets for this GMAC version.
Fixes: 477286b53f55 ("stmmac: add GMAC4 core support")
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PPv2 TX/RX descriptors uses 40bits DMA addresses, but 41 bits masks were
used (GENMASK_ULL(40, 0)).
This commit fixes that by using the correct mask.
Fixes: e7c5359f2eed ("net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Early revisions of certain SoCs cannot do multiple DMA RX streams in
parallel. To avoid data corruption, only allow one DMA RX channel and
fall back to PIO, if needed.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
i2c_hid_command() returns non-zero in error cases (the actual
errno). Error handling in for I2C_HID_QUIRK_RESEND_REPORT_DESCR
case in i2c_hid_resume() had the check inverted; fix that.
Fixes: 3e83eda467 ("HID: i2c-hid: Fix resume issue on Raydium touchscreen device")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
When the last rmnet device attached to a real device is removed, the
real device is unregistered from rmnet. As a result, the real device
lookup fails resulting in a warning when the fill_info handler is
called as part of the rmnet device unregistration.
Fix this by returning the rmnet flags as 0 when no real device is
present.
WARNING: CPU: 0 PID: 1779 at net/core/rtnetlink.c:3254
rtmsg_ifinfo_build_skb+0xca/0x10d
Modules linked in:
CPU: 0 PID: 1779 Comm: ip Not tainted 4.16.0-11872-g7ce2367 #1
Stack:
7fe655f0 60371ea3 00000000 00000000
60282bc6 6006b116 7fe65600 60371ee8
7fe65660 6003a68c 00000000 900000000
Call Trace:
[<6006b116>] ? printk+0x0/0x94
[<6001f375>] show_stack+0xfe/0x158
[<60371ea3>] ? dump_stack_print_info+0xe8/0xf1
[<60282bc6>] ? rtmsg_ifinfo_build_skb+0xca/0x10d
[<6006b116>] ? printk+0x0/0x94
[<60371ee8>] dump_stack+0x2a/0x2c
[<6003a68c>] __warn+0x10e/0x13e
[<6003a82c>] warn_slowpath_null+0x48/0x4f
[<60282bc6>] rtmsg_ifinfo_build_skb+0xca/0x10d
[<60282c4d>] rtmsg_ifinfo_event.part.37+0x1e/0x43
[<60282c2f>] ? rtmsg_ifinfo_event.part.37+0x0/0x43
[<60282d03>] rtmsg_ifinfo+0x24/0x28
[<60264e86>] dev_close_many+0xba/0x119
[<60282cdf>] ? rtmsg_ifinfo+0x0/0x28
[<6027c225>] ? rtnl_is_locked+0x0/0x1c
[<6026ca67>] rollback_registered_many+0x1ae/0x4ae
[<600314be>] ? unblock_signals+0x0/0xae
[<6026cdc0>] ? unregister_netdevice_queue+0x19/0xec
[<6026ceec>] unregister_netdevice_many+0x21/0xa1
[<6027c765>] rtnl_delete_link+0x3e/0x4e
[<60280ecb>] rtnl_dellink+0x262/0x29c
[<6027c241>] ? rtnl_get_link+0x0/0x3e
[<6027f867>] rtnetlink_rcv_msg+0x235/0x274
Fixes: be81a85f5f87 ("net: qualcomm: rmnet: Implement fill_info")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull ceph fixes from Ilya Dryomov:
"A couple of follow-up patches for -rc1 changes in rbd, support for a
timeout on waiting for the acquisition of exclusive lock and a fix for
uninitialized memory access in CephFS, marked for stable"
* tag 'ceph-for-4.17-rc2' of git://github.com/ceph/ceph-client:
rbd: notrim map option
rbd: adjust queue limits for "fancy" striping
rbd: avoid Wreturn-type warnings
ceph: always update atime/mtime/ctime for new inode
rbd: support timeout in rbd_wait_state_locked()
rbd: refactor rbd_wait_state_locked()
|
|
Bogus trimming in tun_net_xmit() causes truncated vlan packets.
skb->len is correct whether or not skb_vlan_tag_present() is true. There
is no more reason to adjust the skb length on xmit in this driver than
any other driver. tun_put_user() adds 4 bytes to the total for tagged
packets because it transmits the tag inline to userspace. This is
similar to a nic transmitting the tag inline on the wire.
Reproducing the bug by sending any tagged packet through back-to-back
connected tap interfaces:
socat TUN,tun-type=tap,iff-up,tun-name=in TUN,tun-type=tap,iff-up,tun-name=out &
ip link add link in name in.20 type vlan id 20
ip addr add 10.9.9.9/24 dev in.20
ip link set in.20 up
tshark -nxxi in -f arp -c1 2>/dev/null &
tshark -nxxi out -f arp -c1 2>/dev/null &
ping -c 1 10.9.9.5 >/dev/null 2>&1
The output from the 'in' and 'out' interfaces are different when the
bug is present:
Capturing on 'in'
0000 ff ff ff ff ff ff 76 cf 76 37 d5 0a 81 00 00 14 ......v.v7......
0010 08 06 00 01 08 00 06 04 00 01 76 cf 76 37 d5 0a ..........v.v7..
0020 0a 09 09 09 00 00 00 00 00 00 0a 09 09 05 ..............
Capturing on 'out'
0000 ff ff ff ff ff ff 76 cf 76 37 d5 0a 81 00 00 14 ......v.v7......
0010 08 06 00 01 08 00 06 04 00 01 76 cf 76 37 d5 0a ..........v.v7..
0020 0a 09 09 09 00 00 00 00 00 00 ..........
Fixes: aff3d70a07ff ("tun: allow to attach ebpf socket filter")
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For some firmware variants - specifically 'capture packed stream' - RSS
filters are not valid. We must check if RSS is actually active rather
than merely enabled.
Fixes: 42356d9a137b ("sfc: support RSS spreading of ethtool ntuple filters")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
xenbus_command_reply() did not actually copy the response string and
leaked stack content instead.
Fixes: 9a6161fe73bd ("xen: return xenstore command failures via response instead of rc")
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull missed timer updates from Thomas Gleixner:
"This is a branch which got forgotten during the merge window, but it
contains only fixes and hardware enablement. No fundamental changes.
- Various fixes for the imx-tpm clocksource driver
- A new timer driver for the NCPM7xx SoC family"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/imx-tpm: Add different counter width support
clocksource/drivers/imx-tpm: Correct some registers operation flow
clocksource/drivers/imx-tpm: Fix typo of clock name
dt-bindings: timer: tpm: fix typo of clock name
clocksource/drivers/npcm: Add NPCM7xx timer driver
dt-binding: timer: document NPCM7xx timer DT bindings
|
|
Due to a firmware bug, the hypervisor can send an interrupt to a
transmit or receive queue just prior to a partition migration, not
allowing the device enough time to handle it and send an EOI. When
the partition migrates, the interrupt is lost but an "EOI-pending"
flag for the interrupt line is still set in firmware. No further
interrupts will be sent until that flag is cleared, effectively
freezing that queue. To workaround this, the driver will disable the
hardware interrupt and send an H_EOI signal prior to re-enabling it.
This will flush the pending EOI and allow the driver to continue
operation.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When parsing the options provided by the user space,
team_nl_cmd_options_set() insert them in a temporary list to send
multiple events with a single message.
While each option's attribute is correctly validated, the code does
not check for duplicate entries before inserting into the event
list.
Exploiting the above, the syzbot was able to trigger the following
splat:
kernel BUG at lib/list_debug.c:31!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 4466 Comm: syzkaller556835 Not tainted 4.16.0+ #17
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__list_add_valid+0xaa/0xb0 lib/list_debug.c:29
RSP: 0018:ffff8801b04bf248 EFLAGS: 00010286
RAX: 0000000000000058 RBX: ffff8801c8fc7a90 RCX: 0000000000000000
RDX: 0000000000000058 RSI: ffffffff815fbf41 RDI: ffffed0036097e3f
RBP: ffff8801b04bf260 R08: ffff8801b0b2a700 R09: ffffed003b604f90
R10: ffffed003b604f90 R11: ffff8801db027c87 R12: ffff8801c8fc7a90
R13: ffff8801c8fc7a90 R14: dffffc0000000000 R15: 0000000000000000
FS: 0000000000b98880(0000) GS:ffff8801db000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000043fc30 CR3: 00000001afe8e000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__list_add include/linux/list.h:60 [inline]
list_add include/linux/list.h:79 [inline]
team_nl_cmd_options_set+0x9ff/0x12b0 drivers/net/team/team.c:2571
genl_family_rcv_msg+0x889/0x1120 net/netlink/genetlink.c:599
genl_rcv_msg+0xc6/0x170 net/netlink/genetlink.c:624
netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2448
genl_rcv+0x28/0x40 net/netlink/genetlink.c:635
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x58b/0x740 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x9f0/0xfa0 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:639
___sys_sendmsg+0x805/0x940 net/socket.c:2117
__sys_sendmsg+0x115/0x270 net/socket.c:2155
SYSC_sendmsg net/socket.c:2164 [inline]
SyS_sendmsg+0x29/0x30 net/socket.c:2162
do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x4458b9
RSP: 002b:00007ffd1d4a7278 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000000000000001b RCX: 00000000004458b9
RDX: 0000000000000010 RSI: 0000000020000d00 RDI: 0000000000000004
RBP: 00000000004a74ed R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000213 R12: 00007ffd1d4a7348
R13: 0000000000402a60 R14: 0000000000000000 R15: 0000000000000000
Code: 75 e8 eb a9 48 89 f7 48 89 75 e8 e8 d1 85 7b fe 48 8b 75 e8 eb bb 48
89 f2 48 89 d9 4c 89 e6 48 c7 c7 a0 84 d8 87 e8 ea 67 28 fe <0f> 0b 0f 1f
40 00 48 b8 00 00 00 00 00 fc ff df 55 48 89 e5 41
RIP: __list_add_valid+0xaa/0xb0 lib/list_debug.c:29 RSP: ffff8801b04bf248
This changeset addresses the avoiding list_add() if the current
option is already present in the event list.
Reported-and-tested-by: syzbot+4d4af685432dc0e56c91@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fixes: 2fcdb2c9e659 ("team: allow to send multiple set events in one message")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pcistub_reg_add() is never called in atomic context.
pcistub_reg_add() is only called by pcistub_quirk_add, which is
only set in DRIVER_ATTR().
Despite never getting called from atomic context,
pcistub_reg_add() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
xen_pcibk_config_quirks_init
xen_pcibk_config_quirks_init() is never called in atomic context.
The call chains ending up at xen_pcibk_config_quirks_init() are:
[1] xen_pcibk_config_quirks_init() <- xen_pcibk_config_init_dev() <-
pcistub_init_device() <- pcistub_seize() <- pcistub_probe()
[2] xen_pcibk_config_quirks_init() <- xen_pcibk_config_init_dev() <-
pcistub_init_device() <- pcistub_init_devices_late() <-
xen_pcibk_init()
pcistub_probe() is only set as ".probe" in struct pci_driver.
xen_pcibk_init() is is only set as a parameter of module_init().
These functions are not called in atomic context.
Despite never getting called from atomic context,
xen_pcibk_config_quirks_init() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
pcistub_device_alloc() is never called in atomic context.
The call chain ending up at pcistub_device_alloc() is:
[1] pcistub_device_alloc() <- pcistub_seize() <- pcistub_probe()
pcistub_probe() is only set as ".probe" in struct pci_driver.
This function is not called in atomic context.
Despite never getting called from atomic context,
pcistub_device_alloc() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
pcistub_init_device() is never called in atomic context.
The call chain ending up at pcistub_init_device() is:
[1] pcistub_init_device() <- pcistub_seize() <- pcistub_probe()
[2] pcistub_init_device() <- pcistub_init_devices_late() <-
xen_pcibk_init()
pcistub_probe() is only set as ".probe" in struct pci_driver.
xen_pcibk_init() is is only set as a parameter of module_init().
These functions are not called in atomic context.
Despite never getting called from atomic context,
pcistub_init_device() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
pcistub_probe() is never called in atomic context.
This function is only set as ".probe" in struct pci_driver.
Despite never getting called from atomic context,
pcistub_probe() calls kmalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Marvell's PPv2 controller has a Packet Header parser, which uses a
fixed-size TCAM array of filter entries.
The mvpp2 driver reserves some ranges among the 256 TCAM entries to
perform MAC and VID filtering. The rest of the TCAM ids are freely usable
for other features, such as IPv4 proto matching.
This commit fixes the MVPP2_PE_LAST_FREE_TID define that sets the end of
the "free range", which included the MAC range. This could therefore allow
some other features to use entries dedicated to MAC filtering,
lowering the number of unicast/multicast addresses that could be allowed
before switching to promiscuous mode.
Fixes: 10fea26ce2aa ("net: mvpp2: Add support for unicast filtering")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is just wrong, sorry. I was trying to fix a static checker
warning and misread the code. The reference taken in macsec_newlink()
is released in macsec_free_netdev() when the netdevice is destroyed.
This reverts commit 5dcd8400884cc4a043a6d4617e042489e5d566a9.
Reported-by: Laura Abbott <labbott@redhat.com>
Fixes: 5dcd8400884c ("macsec: missing dev_put() on error in macsec_newlink()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an option to turn off discard and write zeroes offload support to
avoid deprovisioning a fully provisioned image. When enabled, discard
requests will fail with -EOPNOTSUPP, write zeroes requests will fall
back to manually zeroing.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Hitoshi Kamei <hitoshi.kamei.xm@hitachi.com>
|
|
In order to take full advantage of merging in ceph_file_to_extents(),
allow object set sized I/Os. If the layout is not "fancy", an object
set consists of just one object.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
In some configurations gcc cannot see that rbd_assert(0) leads to an
unreachable code path:
drivers/block/rbd.c: In function 'rbd_img_is_write':
drivers/block/rbd.c:1397:1: error: control reaches end of non-void function [-Werror=return-type]
drivers/block/rbd.c: In function '__rbd_obj_handle_request':
drivers/block/rbd.c:2499:1: error: control reaches end of non-void function [-Werror=return-type]
drivers/block/rbd.c: In function 'rbd_obj_handle_write':
drivers/block/rbd.c:2471:1: error: control reaches end of non-void function [-Werror=return-type]
As the rbd_assert() here shows has no extra information beyond the verbose
BUG(), we can simply use BUG() directly in its place. This is reliably
detected as not returning on any architecture, since it doesn't depend
on the unlikely() comparison that confused gcc.
Fixes: 3da691bf4366 ("rbd: new request handling code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
currently, the rbd_wait_state_locked() will wait forever if we
can't get our state locked. Example:
rbd map --exclusive test1 --> /dev/rbd0
rbd map test1 --> /dev/rbd1
dd if=/dev/zero of=/dev/rbd1 bs=1M count=1 --> IO blocked
To avoid this problem, this patch introduce a timeout design
in rbd_wait_state_locked(). Then rbd_wait_state_locked() will
return error when we reach a timeout.
This patch allow user to set the lock_timeout in rbd mapping.
Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
In preparation for lock_timeout option, make rbd_wait_state_locked()
return error codes.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Removing couple of duplicate includes, found by "make includecheck".
That leaves 1 duplicate include in arch/s390/kernel/entry.S, which is
there for a reason (it includes generated asm/syscall_table.h twice).
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The module exit function of the smsgiucv module uses the incorrect CP
command to disable SMSG messages. The correct command is "SET SMSG OFF".
Use it.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
sclp_early_printk could be used before .bss section is zeroed
(i.e. from als.c during the decompressor phase), therefore values used
by sclp_early_printk should be located in the .data section.
Another reason for that is to avoid potential initrd corruption, if some
code in future would use sclp_early_printk before initrd is moved from
possibly overlapping with .bss section region to a safe location.
Fixes: 0b0d1173d8ae ("s390/sclp: 32 bit event mask compatibility mode")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of minor (and safe changes) that didn't make the initial
pull request plus some bug fixes.
The status handling code is actually a running regression from the
previous merge window which had an incomplete fix (now reverted) and
most of the remaining bug fixes are for problems older than the
current merge window"
[ Side note: this merge also takes the base kernel git repository to 6+
million objects for the first time. Technically we hit it a couple of
merges ago already if you count all the tag objects, but now it
reaches 6M+ objects reachable from HEAD.
I was joking around that that's when I should switch to 5.0, because
3.0 happened at the 2M mark, and 4.0 happened at 4M objects. But
probably not, even if numerology is about as good a reason as any.
- Linus ]
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: devinfo: Add Microsoft iSCSI target to 1024 sector blacklist
scsi: cxgb4i: silence overflow warning in t4_uld_rx_handler()
scsi: dpt_i2o: Use after free in I2ORESETCMD ioctl
scsi: core: Make scsi_result_to_blk_status() recognize CONDITION MET
scsi: core: Rename __scsi_error_from_host_byte() into scsi_result_to_blk_status()
Revert "scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()"
scsi: aacraid: Insure command thread is not recursively stopped
scsi: qla2xxx: Correct setting of SAM_STAT_CHECK_CONDITION
scsi: qla2xxx: correctly shift host byte
scsi: qla2xxx: Fix race condition between iocb timeout and initialisation
scsi: qla2xxx: Avoid double completion of abort command
scsi: qla2xxx: Fix small memory leak in qla2x00_probe_one on probe failure
scsi: scsi_dh: Don't look for NULL devices handlers by name
scsi: core: remove redundant assignment to shost->use_blk_mq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- pass HOSTLDFLAGS when compiling single .c host programs
- build genksyms lexer and parser files instead of using shipped
versions
- rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency
- let the top .gitignore globally ignore artifacts generated by flex,
bison, and asn1_compiler
- let the top Makefile globally clean artifacts generated by flex,
bison, and asn1_compiler
- use safer .SECONDARY marker instead of .PRECIOUS to prevent
intermediate files from being removed
- support -fmacro-prefix-map option to make __FILE__ a relative path
- fix # escaping to prepare for the future GNU Make release
- clean up deb-pkg by using debian tools instead of handrolled
source/changes generation
- improve rpm-pkg portability by supporting kernel-install as a
fallback of new-kernel-pkg
- extend Kconfig listnewconfig target to provide more information
* tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: extend output of 'listnewconfig'
kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg
Kbuild: fix # escaping in .cmd files for future Make
kbuild: deb-pkg: split generating packaging and build
kbuild: use -fmacro-prefix-map to make __FILE__ a relative path
kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers
kbuild: rename *-asn1.[ch] to *.asn1.[ch]
kbuild: clean up *-asn1.[ch] patterns from top-level Makefile
.gitignore: move *-asn1.[ch] patterns to the top-level .gitignore
kbuild: add %.dtb.S and %.dtb to 'targets' automatically
kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically
genksyms: generate lexer and parser during build instead of shipping
kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile
.gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore
kbuild: use HOSTLDFLAGS for single .c executables
|
|
A misconfigured system (e.g. with all interrupts affinitised to all CPUs)
may produce a storm of ARFS steering events. With the existing sfc ARFS
implementation, that could create a backlog of workitems that grinds the
system to a halt. To prevent this, limit the number of workitems that
may be in flight for a given SFC device to 8 (EFX_RPS_MAX_IN_FLIGHT), and
return EBUSY from our ndo_rx_flow_steer method if the limit is reached.
Given this limit, also store the workitems in an array of slots within the
struct efx_nic, rather than dynamically allocating for each request.
The limit should not negatively impact performance, because it is only
likely to be hit in cases where ARFS will be ineffective anyway.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
