| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix an issue in the AMD driver for the UART0 group
- Fix a glitch issue in the Baytrail pin controller
* tag 'pinctrl-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: baytrail: Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH)
pinctrl: amd: fix npins for uart0 in kerncz_groups
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes, most of them for the PCA953x that Andy worked hard to
fix up.
- Fix two runtime PM errorpath problems in the Arizona GPIO driver.
- Fix three interrupt issues in the PCA953x driver.
- Fix the automatic address increment handling in the PCA953x driver
again.
- Add a quirk to the PCA953x that fixes a problem in the Intel
Galileo Gen 2"
* tag 'gpio-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: Fix GPIO resource leak on Intel Galileo Gen 2
gpio: pca953x: disable regmap locking for automatic address incrementing
gpio: pca953x: Fix direction setting when configure an IRQ
gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2
gpio: pca953x: Synchronize interrupt handler properly
gpio: arizona: put pm_runtime in case of failure
gpio: arizona: handle pm_runtime_get_sync failure case
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"An unfortunately large collection of arm64 fixes for -rc5.
Some of this is absolutely trivial, but the alternatives, vDSO and CPU
errata workaround fixes are significant. At least people are finding
and fixing these things, I suppose.
- Fix workaround for CPU erratum #1418040 to disable the compat vDSO
- Fix Oops when single-stepping with KGDB
- Fix memory attributes for hypervisor device mappings at EL2
- Fix memory leak in PSCI and remove useless variable assignment
- Fix up some comments and asm labels in our entry code
- Fix broken register table formatting in our generated html docs
- Fix missing NULL sentinel in CPU errata workaround list
- Fix patching of branches in alternative instruction sections"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/alternatives: don't patch up internal branches
arm64: Add missing sentinel to erratum_1463225
arm64: Documentation: Fix broken table in generated HTML
arm64: kgdb: Fix single-step exception handling oops
arm64: entry: Tidy up block comments and label numbers
arm64: Rework ARM_ERRATUM_1414080 handling
arm64: arch_timer: Disable the compat vdso for cores affected by ARM64_WORKAROUND_1418040
arm64: arch_timer: Allow an workaround descriptor to disable compat vdso
arm64: Introduce a way to disable the 32bit vdso
arm64: entry: Fix the typo in the comment of el1_dbg()
drivers/firmware/psci: Assign @err directly in hotplug_tests()
drivers/firmware/psci: Fix memory leakage in alloc_init_cpu_groups()
KVM: arm64: Fix definition of PAGE_HYP_DEVICE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- Override DLL_CONFIG only with valid values in sdhci-msm
- Get rid of of_match_ptr() macro to fix warning in owl-mmc
- Limit segments to 1 to fix meson-gx G12A/G12B SoCs
* tag 'mmc-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-msm: Override DLL_CONFIG only if the valid value is supplied
mmc: owl-mmc: Get rid of of_match_ptr() macro
mmc: meson-gx: limit segments to 1 when dram-access-quirk is needed
|
|
Pull drm fixes from Dave Airlie:
"I've been off most of the week, but some fixes have piled up. Seems a
bit busier than last week, but they are pretty spread out across a
bunch of drivers, none of them seem that big or worried me too much.
amdgpu:
- Fix a suspend/resume issue with PSP
- Backlight fix for Renoir
- Fix for gpu recovery debugging
radeon:
- Fix a double free in error path
i915:
- fbc fencing fix
- debugfs panic fix
- gem vma constuction fix
- gem pin under vm->nutex fix
nouveau:
- SVM fixes
- display fixes
meson:
- OSD burst length fixes
hibmc:
- runtime warning fix
mediatek:
- cmdq, mmsys fixes
- visibility check fixes"
* tag 'drm-fixes-2020-07-10' of git://anongit.freedesktop.org/drm/drm: (24 commits)
drm/amdgpu: don't do soft recovery if gpu_recovery=0
drm/radeon: fix double free
drm/amd/display: add dmcub check on RENOIR
drm/amdgpu: add TMR destory function for psp
drm/amdgpu: asd function needs to be unloaded in suspend phase
drm/hisilicon/hibmc: Move drm_fbdev_generic_setup() down to avoid the splat
drm/nouveau/nouveau: fix page fault on device private memory
drm/nouveau/svm: fix migrate page regression
drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout
drm/nouveau/kms/nv50-: bail from nv50_audio_disable() early if audio not enabled
drm/i915/gt: Pin the rings before marking active
drm/i915: Also drop vm.ref along error paths for vma construction
drm/i915: Drop vm.ref for duplicate vma on construction
drm/i915/fbc: Fix fence_y_offset handling
drm/i915: Skip stale object handle for debugfs per-file-stats
drm/mediatek: mtk_hdmi: Remove debug messages for function calls
drm/mediatek: mtk_mt8173_hdmi_phy: Remove unnused const variables
drm/mediatek: Delete not used of_device_get_match_data
drm/mediatek: Remove unnecessary conversion to bool
drm/meson: viu: fix setting the OSD burst length in VIU_OSD1_FIFO_CTRL_STAT
...
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.8-2020-07-09:
amdgpu:
- Fix a suspend/resume issue with PSP
- Backlight fix for Renoir
- Fix for gpu recovery debugging
radeon:
- Fix a double free in error path
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709185221.44895-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
One display's fbc patch fixing fence_y_offset calculation
from Ville and 4 patches from Chris on GEM: 1 fixing a debugfs
panic and others fixing vma construction and pin under vm->mutex.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708190654.GA3924867@intel.com
|
|
- SVM fixes
- display fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5i-dc0Onbk8FWzd-PTgXHHWi6jcE3O0hVx8+V5qEOeqg@mail.gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* meson: OSD burst-length fixes
* hibmc: fix runtime warning by setting up generic fbdev after
registering device
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708121050.GA29420@linux-uq9g
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes for Linux 5.8
This include fixup for cmdq, mmsys, visibility checking and some refinement.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707153944.604-1-chunkuang.hu@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- A request-based DM fix to not use a waitqueue to wait for blk-mq IO
completion because doing so is racey.
- A couple more DM zoned target fixes to address issues introduced
during the 5.8 cycle.
- A DM core fix to use proper interface to cleanup DM's static flush
bio.
- A DM core fix to prevent mm recursion during memory allocation needed
by dm_kobject_uevent.
* tag 'for-5.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: use noio when sending kobject event
dm zoned: Fix zone reclaim trigger
dm zoned: fix unused but set variable warnings
dm writecache: reject asynchronous pmem devices
dm: use bio_uninit instead of bio_disassociate_blkg
dm: do not use waitqueue for request-based DM
|
|
It's impossible to debug shader hangs with soft recovery.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
clang static analysis flags this error
drivers/gpu/drm/radeon/ci_dpm.c:5652:9: warning: Use of memory after it is freed [unix.Malloc]
kfree(rdev->pm.dpm.ps[i].ps_priv);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/ci_dpm.c:5654:2: warning: Attempt to free released memory [unix.Malloc]
kfree(rdev->pm.dpm.ps);
^~~~~~~~~~~~~~~~~~~~~~
problem is reported in ci_dpm_fini, with these code blocks.
for (i = 0; i < rdev->pm.dpm.num_ps; i++) {
kfree(rdev->pm.dpm.ps[i].ps_priv);
}
kfree(rdev->pm.dpm.ps);
The first free happens in ci_parse_power_table where it cleans up locally
on a failure. ci_dpm_fini also does a cleanup.
ret = ci_parse_power_table(rdev);
if (ret) {
ci_dpm_fini(rdev);
return ret;
}
So remove the cleanup in ci_parse_power_table and
move the num_ps calculation to inside the loop so ci_dpm_fini
will know how many array elements to free.
Fixes: cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
RENOIR loads dmub fw not dmcu, check dmcu only will prevent loading iram,
it breaks backlight control.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208277
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
TMR is required to be destoried with GFX_CMD_ID_DESTROY_TMR while the
system goes to suspend. Otherwise, PSP may return the failure state
(0xFFFF007) on Gfx-2-PSP command GFX_CMD_ID_SETUP_TMR after do multiple
times suspend/resume.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Unload ASD function in suspend phase.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
ARM64_WORKAROUND_1418040
ARM64_WORKAROUND_1418040 requires that AArch32 EL0 accesses to
the virtual counter register are trapped and emulated by the kernel.
This makes the vdso pretty pointless, and in some cases livelock
prone.
Provide a workaround entry that limits the vdso to 64bit tasks.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200706163802.1836732-4-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As we are about to disable the vdso for compat tasks in some circumstances,
let's allow a workaround descriptor to express exactly that.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200706163802.1836732-3-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The return value of down_and_up_cpus() can be assigned to @err directly.
With that, the useless assignment to @err with zero can be dropped.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200630075943.203954-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The CPU mask (@tmp) should be released on failing to allocate
@cpu_groups or any of its elements. Otherwise, it leads to memory
leakage because the CPU mask variable is dynamically allocated
when CONFIG_CPUMASK_OFFSTACK is enabled.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200630075227.199624-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
kobject_uevent may allocate memory and it may be called while there are dm
devices suspended. The allocation may recurse into a suspended device,
causing a deadlock. We must set the noio flag when sending a uevent.
The observed deadlock was reported here:
https://www.redhat.com/archives/dm-devel/2020-March/msg00025.html
Reported-by: Khazhismel Kumykov <khazhy@google.com>
Reported-by: Tahsin Erdogan <tahsin@google.com>
Reported-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Only triggering reclaim based on the percentage of unmapped cache
zones can fail to detect cases where reclaim is needed, e.g. if the
target has only 2 or 3 cache zones and only one unmapped cache zone,
the percentage of free cache zones is higher than
DMZ_RECLAIM_LOW_UNMAP_ZONES (30%) and reclaim does not trigger.
This problem, combined with the fact that dmz_schedule_reclaim() is
called from dmz_handle_bio() without the map lock held, leads to a
race between zone allocation and dmz_should_reclaim() result.
Depending on the workload applied, this race can lead to the write
path waiting forever for a free zone without reclaim being triggered.
Fix this by moving dmz_schedule_reclaim() inside dmz_alloc_zone()
under the map lock. This results in checking the need for zone reclaim
whenever a new data or buffer zone needs to be allocated.
Also fix dmz_reclaim_percentage() to always return 0 if the number of
unmapped cache (or random) zones is less than or equal to 1.
Suggested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Fix unused but set variable warnings:
drivers/md/dm-zoned-reclaim.c:504:42: warning:
variable nr_rnd set but not used [-Wunused-but-set-variable]
504 | unsigned int p_unmap, nr_unmap_rnd = 0, nr_rnd = 0;
| ^~~~~~
drivers/md/dm-zoned-reclaim.c:504:24: warning:
variable nr_unmap_rnd set but not used [-Wunused-but-set-variable]
504 | unsigned int p_unmap, nr_unmap_rnd = 0, nr_rnd = 0;
| ^~~~~~~~~~~~
Fixes: f97809aec589 ("dm zoned: per-device reclaim")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
DM writecache does not handle asynchronous pmem. Reject it when
supplied as cache.
Link: https://lore.kernel.org/linux-nvdimm/87lfk5hahc.fsf@linux.ibm.com/
Fixes: 6e84200c0a29 ("virtio-pmem: Add virtio pmem driver")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
bio_uninit is the proper API to clean up a BIO that has been allocated
on stack or inside a structure that doesn't come from the BIO allocator.
Switch dm to use that instead of bio_disassociate_blkg, which really is
an implementation detail. Note that the bio_uninit calls are also moved
to the two callers of __send_empty_flush, so that they better pair with
the bio_init calls used to initialize them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
During DLL initialization, the DLL_CONFIG register value would be
updated with the value supplied from the device-tree.
Override this register only if a valid value is supplied.
Fixes: 03591160ca19 ("mmc: sdhci-msm: Read and use DLL Config property from device tree file")
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Link: https://lore.kernel.org/r/1594213888-2780-1-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The HiSilicon hibmc driver triggers a splat at boot time as below
[ 14.137806] ------------[ cut here ]------------
[ 14.142405] hibmc-drm 0000:0a:00.0: Device has not been registered.
[ 14.148661] WARNING: CPU: 0 PID: 496 at drivers/gpu/drm/drm_fb_helper.c:2233 drm_fbdev_generic_setup+0x15c/0x1b8
[ 14.158787] [...]
[ 14.278307] Call trace:
[ 14.280742] drm_fbdev_generic_setup+0x15c/0x1b8
[ 14.285337] hibmc_pci_probe+0x354/0x418
[ 14.289242] local_pci_probe+0x44/0x98
[ 14.292974] work_for_cpu_fn+0x20/0x30
[ 14.296708] process_one_work+0x1c4/0x4e0
[ 14.300698] worker_thread+0x2c8/0x528
[ 14.304431] kthread+0x138/0x140
[ 14.307646] ret_from_fork+0x10/0x18
[ 14.311205] ---[ end trace a2000ec2d838af4d ]---
This turned out to be due to the fbdev device hasn't been registered when
drm_fbdev_generic_setup() is invoked. Let's fix the splat by moving it down
after drm_dev_register() which will follow the "Display driver example"
documented by commit de99f0600a79 ("drm/drv: DOC: Add driver example
code").
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706144713.1123-1-yuzenghui@huawei.com
|
|
If system memory is migrated to device private memory and no GPU MMU
page table entry exists, the GPU will fault and call hmm_range_fault()
to get the PFN for the page. Since the .dev_private_owner pointer in
struct hmm_range is not set, hmm_range_fault returns an error which
results in the GPU program stopping with a fatal fault.
Fix this by setting .dev_private_owner appropriately.
Fixes: 08ddddda667b ("mm/hmm: check the device private page owner in hmm_range_fault()")
Cc: stable@vger.kernel.org
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The patch to add zero page migration to GPU memory inadvertently included
part of a future change which broke normal page migration to GPU memory
by copying too much data and corrupting GPU memory.
Fix this by only copying one page instead of a byte count.
Fixes: 9d4296a7d4b3 ("drm/nouveau/nouveau/hmm: fix migrate zero page to GPU")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Tegra TRM says worst-case reply time is 1216us, and this should fix some
spurious timeouts that have been popping up.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Prevents "snd_hda_codec_hdmi hdaudioC1D0: HDMI: pin nid 5 not registered"
that occur on some configurations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
On eviction, we acquire the vm->mutex and then wait on the vma->active.
Therefore when binding and pinning the vma, we must follow the same
sequence, lock/pin the vma then mark it active. Otherwise, we mark the
vma as active, then wait for the vm->mutex, and meanwhile the evictor
holding the mutex waits upon us to complete our activity.
Fixes: 8ccfc20a7d56 ("drm/i915/gt: Mark ring->vma as active while pinned")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706170138.8993-1-chris@chris-wilson.co.uk
(cherry picked from commit 8567774e87e23a57155e5102f81208729b992ae6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"MTD:
- Set a missing master partition panic write flag
Raw NAND:
- Fix build issue in the xway driver
- Fix a wrong return code"
* tag 'mtd/fixes-for-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: xway: Fix build issue
mtd: set master partition panic write flag
nandsim: Fix return code testing of ns_find_operation()
|
|
Pull tpm fix from Jarkko Sakkinen:
"Revert commit e918e570415c ("tpm_tis: Remove the HID IFX0102").
Removing IFX0102 from tpm_tis was not a right move because both
tpm_tis and tpm_infineon use the same device ID.
A real fix requires quirks added to both drivers. It can probably wait
until v5.9 as the bug has existed since 2006"
* tag 'tpmdd-next-v5.8-rc5' of git://git.infradead.org/users/jjs/linux-tpmdd:
Revert commit e918e570415c ("tpm_tis: Remove the HID IFX0102")
|
|
This MIPS driver does not support COMPILE_TEST yet and failed to build
under my radar.
Replace 'mtd' chich is not defined in the scope of xway_nand_remove()
by nand_to_mtd(chip). The mistake has been added in the long series
dropping nand_release().
Tested with a 7.3.0 MIPS GCC toolchain built with Buildroot.
Fixes: 9fdd78f7bcda ("mtd: rawnand: xway: Stop using nand_release()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200626065511.16424-1-miquel.raynal@bootlin.com
|
|
Given request-based DM now uses blk-mq's blk_mq_queue_inflight() to
determine if outstanding IO has completed (and DM has no control over
the blk-mq state machine used to track outstanding IO) it is unsafe to
wakeup waiter (dm_wait_for_completion) before blk-mq has cleared a
request's state bits (e.g. MQ_RQ_IN_FLIGHT or MQ_RQ_COMPLETE). As
such dm_wait_for_completion() could be left to wait indefinitely if no
other requests complete.
Fix this by eliminating request-based DM's use of waitqueue to wait
for blk-mq requests to complete in dm_wait_for_completion.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Depends-on: 3c94d83cb3526 ("blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Removing IFX0102 from tpm_tis was not a right move because both tpm_tis
and tpm_infineon use the same device ID. Revert the commit and add a
remark about a bug caused by commit 93e1b7d42e1e ("[PATCH] tpm: add HID
module parameter").
Fixes: e918e570415c ("tpm_tis: Remove the HID IFX0102")
Reported-by: Peter Huewe <peterhuewe@gmx.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Not only do we need to release the vm.ref we acquired for the vma on the
duplicate insert branch, but also for the normal error paths, so roll
them all into one.
Reported-by: Andi Shyti <andi.shyti@intel.com>
Suggested-by: Andi Shyti <andi.shyti@intel.com>
Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702211015.29604-1-chris@chris-wilson.co.uk
(cherry picked from commit 03fca66b7a36b52da8915341eee388267f6d5b73)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
As we allow for parallel threads to create the same vma instance
concurrently, and we only filter out the duplicates upon reacquiring the
spinlock for the rbtree, we have to free the loser of the constructors'
race. When freeing, we should also drop any resource references acquired
for the redundant vma.
Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702083225.20044-1-chris@chris-wilson.co.uk
(cherry picked from commit 2377427cdd2b7514eb4c40241cf5c4dec63c1bec)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The current fence_y_offset calculation is broken. I think it more or
less used to do the right thing, but then I changed the plane code
to put the final x/y source offsets back into the src rectangle so
now it's just subtraacting the same value from itself. The code would
never have worked if we allowed the framebuffer to have a non-zero
offset.
Let's do this in a better way by just calculating the fence_y_offset
from the final plane surface offset. Note that we don't align the
plane surface address to fence rows so with horizontal panning there's
often a horizontal offset from the fence start to the surface address
as well. We have no way to tell the hardware about that so we just
ignore it. Based on some quick tests the invlidation still happens
correctly. I presume due to the invalidation nuking at least the full
line (or a segment of multiple lines).
Fixes: 54d4d719fa11 ("drm/i915: Overcome display engine stride limits via GTT remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-4-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 5331889b5ffb11d6257953e418291a9f04c02bed)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
As we close a handle GEM object, we update the drm_file's idr with an
error^W NULL pointer to indicate the in-progress closure, and finally
removing it. If we read the idr directly, we may then see an invalid
object pointer, and in our debugfs per_file_stats() we therefore need
to protect against the entry being invalid.
[ 1016.651637] RIP: 0010:per_file_stats+0xe/0x16e
[ 1016.651646] Code: d2 41 0f b6 8e 69 8c 00 00 48 89 df 48 c7 c6 7b 74 8c be 31 c0 e8 0c 89 cf ff eb d2 0f 1f 44 00 00 55 48 89 e5 41
57 41 56 53 <8b> 06 85 c0 0f 84 4d 01 00 00 49 89 d6 48 89 f3 3d ff ff ff 7f 73
[ 1016.651651] RSP: 0018:ffffad3a01337ba0 EFLAGS: 00010293
[ 1016.651656] RAX: 0000000000000018 RBX: ffff96fe040d65e0 RCX: 0000000000000002
[ 1016.651660] RDX: ffffad3a01337c50 RSI: 0000000000000000 RDI: 00000000000001e8
[ 1016.651663] RBP: ffffad3a01337bb8 R08: 0000000000000000 R09: 00000000000001c0
[ 1016.651667] R10: 0000000000000000 R11: ffffffffbdbe5fce R12: 0000000000000000
[ 1016.651671] R13: ffffffffbdbe5fce R14: ffffad3a01337c50 R15: 0000000000000001
[ 1016.651676] FS: 00007a597e2d7480(0000) GS:ffff96ff3bb00000(0000) knlGS:0000000000000000
[ 1016.651680] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1016.651683] CR2: 0000000000000000 CR3: 0000000171fc2001 CR4: 00000000003606e0
[ 1016.651687] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1016.651690] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1016.651693] Call Trace:
[ 1016.651693] Call Trace:
[ 1016.651703] idr_for_each+0x8a/0xe8
[ 1016.651711] i915_gem_object_info+0x2a3/0x3eb
[ 1016.651720] seq_read+0x162/0x3ca
[ 1016.651727] full_proxy_read+0x5b/0x8d
[ 1016.651733] __vfs_read+0x45/0x1bb
[ 1016.651741] vfs_read+0xc9/0x15e
[ 1016.651746] ksys_read+0x7e/0xde
[ 1016.651752] do_syscall_64+0x54/0x68
[ 1016.651758] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: a8c15954d64a ("drm/i915: Protect debugfs per_file_stats with RCU lock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630152724.3734-1-chris@chris-wilson.co.uk
(cherry picked from commit c1b9fd3d310177b31621d5e661f06885869cae12)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"Bugfixes and a one-liner patch to silence a sparse warning"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Stop clobbering x0 for HVC_SOFT_RESTART
KVM: arm64: PMU: Fix per-CPU access in preemptible context
KVM: VMX: Use KVM_POSSIBLE_CR*_GUEST_BITS to initialize guest/host masks
KVM: x86: Mark CR4.TSD as being possibly owned by the guest
KVM: x86: Inject #GP if guest attempts to toggle CR4.LA57 in 64-bit mode
kvm: use more precise cast and do not drop __user
KVM: x86: bit 8 of non-leaf PDPEs is not reserved
KVM: X86: Fix async pf caused null-ptr-deref
KVM: arm64: vgic-v4: Plug race between non-residency and v4.1 doorbell
KVM: arm64: pvtime: Ensure task delay accounting is enabled
KVM: arm64: Fix kvm_reset_vcpu() return code being incorrect with SVE
KVM: arm64: Annotate hyp NMI-related functions as __always_inline
KVM: s390: reduce number of IO pins to 1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Initialize jump labels before early command line parsing in order to
make init_on_alloc and init_on_free options work
- Fix vfio-ccw build error due to missing include
- Prevent callchain data collection with hardware sampling, since the
callchains simply do not exist
- Prevent multiple registrations of the same zPCI function
- Update defconfigs
* tag 's390-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
vfio-ccw: Fix a build error due to missing include of linux/slab.h
s390: update defconfigs
s390/cpum_sf: prohibit callchain data collection
s390/setup: init jump labels before command line parsing
s390/maccess: add no DAT mode to kernel_write
s390/pci: fix enabling a reserved PCI function
|
|
Remove the 'of_match_ptr()' macro to fix the warning when CONFIG_OF is
not selected.
drivers/mmc/host/owl-mmc.c:677:34: warning: unused variable 'owl_mmc_of_match'
[-Wunused-const-variable]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20200621025330.10561-1-mani@kernel.org
Fixes: ff65ffe46d28 ("mmc: Add Actions Semi Owl SoCs SD/MMC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of interrupt chip driver fixes:
- Ensure the atomicity of affinity updates in the GIC driver
- Don't try to sleep in atomic context when waiting for the GICv4.1
to respond. Use polling instead.
- Typo fixes in Kconfig and warnings"
* tag 'irq-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic: Atomically update affinity
irqchip/riscv-intc: Fix a typo in a pr_warn()
irqchip/gic-v4.1: Use readx_poll_timeout_atomic() to fix sleep in atomic
irqchip/loongson-pci-msi: Fix a typo in Kconfig
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four small fixes in three drivers.
The mptfusion one has actually caused user visible issues in certain
kernel configurations"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mptfusion: Don't use GFP_ATOMIC for larger DMA allocations
scsi: libfc: Skip additional kref updating work event
scsi: libfc: Handling of extra kref
scsi: qla2xxx: Fix a condition in qla2x00_find_all_fabric_devs()
|
|
Pull block fixes from Jens Axboe:
- NVMe fixes from Christoph:
- Fix crash in multi-path disk add (Christoph)
- Fix ignore of identify error (Sagi)
- Fix a compiler complaint that a function should be static (Wei)
* tag 'block-5.8-2020-07-05' of git://git.kernel.dk/linux-block:
block: make function __bio_integrity_free() static
nvme: fix a crash in nvme_mpath_add_disk
nvme: fix identify error status silent ignore
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The usual driver fixes and documentation updates"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mlxcpld: check correct size of maximum RECV_LEN packet
i2c: add Kconfig help text for slave mode
i2c: slave-eeprom: update documentation
i2c: eg20t: Load module automatically if ID matches
i2c: designware: platdrv: Set class based on DMI
i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665
|
|
Equivalent information can be nowadays obtained using function tracer
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
There are some `static const u8` variables that are not used, this
triggers a warning building with `make W=1`, it is safe to remove them,
so do it and make the compiler more happy.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
