summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget/function/u_ether.c
AgeCommit message (Collapse)Author
2024-07-01Merge 6.10-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well for some follow-on patches. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-27Revert "usb: gadget: u_ether: Replace netif_stop_queue with netif_device_detach"Ferry Toth
This reverts commit f49449fbc21e7e9550a5203902d69c8ae7dfd918. This commit breaks u_ether on some setups (at least Merrifield). The fix "usb: gadget: u_ether: Re-attach netif device to mirror detachment" party restores u-ether. However the netif usb: remains up even usb is switched from device to host mode. This creates problems for user space as the interface remains in the routing table while not realy present and network managers (connman) not detecting a network change. Various attempts to find the root cause were unsuccesful up to now. Therefore revert until a solution is found. Link: https://lore.kernel.org/linux-usb/20231006141231.7220-1-hgajjar@de.adit-jv.com/ Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reported-by: Ferry Toth <fntoth@gmail.com> Fixes: f49449fbc21e ("usb: gadget: u_ether: Replace netif_stop_queue with netif_device_detach") Cc: stable@vger.kernel.org Signed-off-by: Ferry Toth <fntoth@gmail.com> Link: https://lore.kernel.org/r/20240620204832.24518-3-ftoth@exalondelft.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-27Revert "usb: gadget: u_ether: Re-attach netif device to mirror detachment"Ferry Toth
This reverts commit 76c945730cdffb572c7767073cc6515fd3f646b4. Prerequisite revert for the reverting of the original commit f49449fbc21e. Fixes: 76c945730cdf ("usb: gadget: u_ether: Re-attach netif device to mirror detachment") Fixes: f49449fbc21e ("usb: gadget: u_ether: Replace netif_stop_queue with netif_device_detach") Reported-by: Ferry Toth <fntoth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Ferry Toth <fntoth@gmail.com> Link: https://lore.kernel.org/r/20240620204832.24518-2-ftoth@exalondelft.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-20usb: gadget: add missing MODULE_DESCRIPTION() macrosJeff Johnson
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/libcomposite.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_acm.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_ss_lb.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/u_serial.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_serial.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_obex.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/u_ether.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_ncm.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_ecm.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_phonet.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_eem.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_ecm_subset.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_rndis.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_mass_storage.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_fs.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_uac1.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_uac1_legacy.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_uac2.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_uvc.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_midi.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_midi2.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_hid.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_printer.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/function/usb_f_tcm.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/legacy/g_zero.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/legacy/g_midi.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/usb/gadget/legacy/g_dbgp.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20240605-md-drivers-usb-gadget-v1-1-29847a46aad3@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26usb: gadget: u_ether: replace deprecated strncpy with strscpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. Let's use the new 2-argument strscpy() as this guarantees NUL-termination on the destination buffer and also uses the destination buffer's size to bound the operation. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20240318-strncpy-drivers-usb-gadget-function-u_ether-c-v1-1-e8543a1db24a@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-19usb: gadget: constify the struct device_type usageRicardo B. Marliere
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the gadget_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Link: https://lore.kernel.org/r/20240218-device_cleanup-usb-v1-3-77423c4da262@marliere.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04usb: gadget: u_ether: Re-attach netif device to mirror detachmentRichard Acayan
In 6.7-rc1, there was a netif_device_detach call added to the gether_disconnect function. This clears the __LINK_STATE_PRESENT bit of the netif device and suppresses pings (ICMP messages) and TCP connection requests from the connected host. If userspace temporarily disconnects the gadget, such as by temporarily removing configuration in the gadget configfs interface, network activity should continue to be processed when the gadget is re-connected. Mirror the netif_device_detach call with a netif_device_attach call in gether_connect to fix re-connecting gadgets. Link: https://gitlab.com/postmarketOS/pmaports/-/tree/6002e51b7090aeeb42947e0ca7ec22278d7227d0/main/postmarketos-base-ui/rootfs-usr-lib-NetworkManager-dispatcher.d-50-tethering.sh Cc: stable <stable@kernel.org> Fixes: f49449fbc21e ("usb: gadget: u_ether: Replace netif_stop_queue with netif_device_detach") Signed-off-by: Richard Acayan <mailingradian@gmail.com> Tested-by: Luca Weiss <luca@z3ntu.xyz> Tested-by: Duje Mihanović <duje.mihanovic@skole.hr> Link: https://lore.kernel.org/r/20231218164532.411125-2-mailingradian@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-08usb: gadget: u_ether: Replace netif_stop_queue with netif_device_detachHardik Gajjar
This patch replaces the usage of netif_stop_queue with netif_device_detach in the u_ether driver. The netif_device_detach function not only stops all tx queues by calling netif_tx_stop_all_queues but also marks the device as removed by clearing the __LINK_STATE_PRESENT bit. This change helps notify user space about the disconnection of the device more effectively, compared to netif_stop_queue, which only stops a single transmit queue. Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com> Link: https://lore.kernel.org/r/20231006155646.12938-1-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: gadget: use working speed to calcaulate network bitrate and qlenLinyu Yuan
Take ecm_bitrate() as example, it will be called after gadget device link speed negotiation, consider code if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER), if a gadget device link speed is USB_SPEED_SUPER, gadget_is_superspeed(g) must be true, or not it is a wrong configuration of gadget max support speed. Remove gadget_is_superspeed(g) checking should be safe, and remove other similar operation in ncm, rndis, u_ether. Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/20230803091053.9714-2-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13usb: gadget: u_ether: Fix host MAC address caseKonrad Gräfe
The CDC-ECM specification [1] requires to send the host MAC address as an uppercase hexadecimal string in chapter "5.4 Ethernet Networking Functional Descriptor": The Unicode character is chosen from the set of values 30h through 39h and 41h through 46h (0-9 and A-F). However, snprintf(.., "%pm", ..) generates a lowercase MAC address string. While most host drivers are tolerant to this, UsbNcm.sys on Windows 10 is not. Instead it uses a different MAC address with all bytes set to zero including and after the first byte containing a lowercase letter. On Windows 11 Microsoft fixed it, but apparently they did not backport the fix. This change fixes the issue by upper-casing the MAC to comply with the specification. [1]: https://www.usb.org/document-library/class-definitions-communication-devices-12, file ECM120.pdf Fixes: bcd4a1c40bee ("usb: gadget: u_ether: construct with default values and add setters/getters") Cc: stable@vger.kernel.org Signed-off-by: Konrad Gräfe <k.graefe@gateware.de> Link: https://lore.kernel.org/r/20230505143640.443014-1-k.graefe@gateware.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-29usb: gadget: f_ecm: Add suspend/resume and remote wakeup supportElson Roy Serrao
When host sends suspend notification to the device, handle the suspend callbacks in the function driver. Depending on the remote wakeup capability the device can either trigger a remote wakeup or wait for the host initiated resume to resume data transfer. Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/1679694482-16430-7-git-send-email-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-15usb: gadget: u_ether: Don't warn in gether_setup_name_default()Jon Hunter
The function gether_setup_name_default() is called by various USB ethernet gadget drivers. Calling this function will select a random host and device MAC addresses. A properly working driver should be silent and not warn the user about default MAC addresses selection. Given that the MAC addresses are also printed when the function gether_register_netdev() is called, remove these unnecessary warnings. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Link: https://lore.kernel.org/r/20230209125319.18589-2-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-15usb: gadget: u_ether: Convert prints to device printsJon Hunter
The USB ethernet gadget driver implements its own print macros which call printk. Device drivers should use the device prints that print the device name. Fortunately, the same macro names are defined in the header file 'linux/usb/composite.h' and these use the device prints. Therefore, remove the local definitions in the USB ethernet gadget driver and use those in 'linux/usb/composite.h'. The only difference is that now the device name is printed instead of the ethernet interface name. Tested using ethernet gadget on Jetson AGX Orin. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20230209125319.18589-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-09Revert "usb: gadget: u_ether: Do not make UDC parent of the net device"Paul Cercueil
This reverts commit 321b59870f850a10dbb211ecd2bd87b41497ea6f. This commit broke USB networking on Ingenic SoCs and maybe elsewhere. The actual reason is unknown; and while a proper fix would be better, we're sitting at -rc7 now, so a revert is justified - and we can work on re-introducing this change for 6.3. Fixes: 321b59870f85 ("usb: gadget: u_ether: Do not make UDC parent of the net device") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20230209105626.10597-1-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-09usb: gadget: u_ether: Do not make UDC parent of the net deviceSascha Hauer
The UDC is not a suitable parent of the net device as the UDC can change or vanish during the lifecycle of the ethernet gadget. This can be illustrated with the following: mkdir -p /sys/kernel/config/usb_gadget/mygadget cd /sys/kernel/config/usb_gadget/mygadget mkdir -p configs/c.1/strings/0x409 echo "C1:Composite Device" > configs/c.1/strings/0x409/configuration mkdir -p functions/ecm.usb0 ln -s functions/ecm.usb0 configs/c.1/ echo "dummy_udc.0" > UDC rmmod dummy_hcd The 'rmmod' removes the UDC from the just created gadget, leaving the still existing net device with a no longer existing parent. Accessing the ethernet device with commands like: ip --details link show usb0 will result in a KASAN splat: ================================================================== BUG: KASAN: use-after-free in if_nlmsg_size+0x3e8/0x528 Read of size 4 at addr c5c84754 by task ip/357 CPU: 3 PID: 357 Comm: ip Not tainted 6.1.0-rc3-00013-gd14953726b24-dirty #324 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from print_report+0x134/0x4d4 print_report from kasan_report+0x78/0x10c kasan_report from if_nlmsg_size+0x3e8/0x528 if_nlmsg_size from rtnl_getlink+0x2b4/0x4d0 rtnl_getlink from rtnetlink_rcv_msg+0x1f4/0x674 rtnetlink_rcv_msg from netlink_rcv_skb+0xb4/0x1f8 netlink_rcv_skb from netlink_unicast+0x294/0x478 netlink_unicast from netlink_sendmsg+0x328/0x640 netlink_sendmsg from ____sys_sendmsg+0x2a4/0x3b4 ____sys_sendmsg from ___sys_sendmsg+0xc8/0x12c ___sys_sendmsg from sys_sendmsg+0xa0/0x120 sys_sendmsg from ret_fast_syscall+0x0/0x1c Solve this by not setting the parent of the ethernet device. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20221104131031.850850-2-s.hauer@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Reviewed-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210116.7517-1-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-24usb: gadget: u_ether: Remove duplicated include in u_ether.cYang Li
Fix following includecheck warning: ./drivers/usb/gadget/function/u_ether.c: linux/etherdevice.h is included more than once. Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20220623010808.9816-1-yang.lee@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10usb: gadget: u_ether: fix regression in setting fixed MAC addressMarian Postevca
In systemd systems setting a fixed MAC address through the "dev_addr" module argument fails systematically. When checking the MAC address after the interface is created it always has the same but different MAC address to the one supplied as argument. This is partially caused by systemd which by default will set an internally generated permanent MAC address for interfaces that are marked as having a randomly generated address. Commit 890d5b40908bfd1a ("usb: gadget: u_ether: fix race in setting MAC address in setup phase") didn't take into account the fact that the interface must be marked as having a set MAC address when it's set as module argument. Fixed by marking the interface with NET_ADDR_SET when the "dev_addr" module argument is supplied. Fixes: 890d5b40908bfd1a ("usb: gadget: u_ether: fix race in setting MAC address in setup phase") Cc: stable@vger.kernel.org Signed-off-by: Marian Postevca <posteuca@mutex.one> Link: https://lore.kernel.org/r/20220603153459.32722-1-posteuca@mutex.one Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-13usb: gadget: u_ether: fix race in setting MAC address in setup phaseMarian Postevca
When listening for notifications through netlink of a new interface being registered, sporadically, it is possible for the MAC to be read as zero. The zero MAC address lasts a short period of time and then switches to a valid random MAC address. This causes problems for netd in Android, which assumes that the interface is malfunctioning and will not use it. In the good case we get this log: InterfaceController::getCfg() ifName usb0 hwAddr 92:a8:f0:73:79:5b ipv4Addr 0.0.0.0 flags 0x1002 In the error case we get these logs: InterfaceController::getCfg() ifName usb0 hwAddr 00:00:00:00:00:00 ipv4Addr 0.0.0.0 flags 0x1002 netd : interfaceGetCfg("usb0") netd : interfaceSetCfg() -> ServiceSpecificException (99, "[Cannot assign requested address] : ioctl() failed") The reason for the issue is the order in which the interface is setup, it is first registered through register_netdev() and after the MAC address is set. Fixed by first setting the MAC address of the net_device and after that calling register_netdev(). Fixes: bcd4a1c40bee885e ("usb: gadget: u_ether: construct with default values and add setters/getters") Cc: stable@vger.kernel.org Signed-off-by: Marian Postevca <posteuca@mutex.one> Link: https://lore.kernel.org/r/20211204214912.17627-1-posteuca@mutex.one Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20usb: gadget: u_ether: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Reviewed-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20211019172124.1413620-1-kuba@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: gadget: u_ether: fix a potential null pointer dereferenceMaciej Żenczykowski
f_ncm tx timeout can call us with null skb to flush a pending frame. In this case skb is NULL to begin with but ceases to be null after dev->wrap() completes. In such a case in->maxpacket will be read, even though we've failed to check that 'in' is not NULL. Though I've never observed this fail in practice, however the 'flush operation' simply does not make sense with a null usb IN endpoint - there's nowhere to flush to... (note that we're the gadget/device, and IN is from the point of view of the host, so here IN actually means outbound...) Cc: Brooke Basile <brookebasile@gmail.com> Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20210701114834.884597-6-zenczykowski@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-15usb: gadget: u_ether: support configuring interface names.Lorenzo Colitti
This patch allows the administrator to configure the interface name of a function using u_ether (e.g., eem, ncm, rndis). Currently, all such interfaces, regardless of function type, are always called usb0, usb1, etc. This makes it very cumbersome to use more than one such type at a time, because userspace cannnot easily tell the interfaces apart and apply the right configuration to each one. Interface renaming in userspace based on driver doesn't help, because the interfaces all have the same driver. Without this patch, doing this require hacks/workarounds such as setting fixed MAC addresses on the functions, and then renaming by MAC address, or scraping configfs after each interface is created to find out what it is. Setting the interface name is done by writing to the same "ifname" configfs attribute that reports the interface name after the function is bound. The write must contain an interface pattern such as "usb%d" (which will cause the net core to pick the next available interface name starting with "usb"). This patch does not allow writing an exact interface name (as opposed to a pattern) because if the interface already exists at bind time, the bind will fail and the whole gadget will fail to activate. This could be allowed in a future patch. For compatibility with current userspace, when reading an ifname that has not currently been set, the result is still "(unnamed net_device)". Once a write to ifname happens, then reading ifname will return whatever was last written. Tested by configuring an rndis function and an ncm function on the same gadget, and writing "rndis%d" to ifname on the rndis function and "ncm%d" to ifname on the ncm function. When the gadget was bound, the rndis interface was rndis0 and the ncm interface was ncm0. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Link: https://lore.kernel.org/r/20210113234222.3272933-1-lorenzo@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-28usb: gadget: u_ether: Fix MTU size mismatch with RX packet sizeManish Narani
Fix the MTU size issue with RX packet size as the host sends the packet with extra bytes containing ethernet header. This causes failure when user sets the MTU size to the maximum i.e. 15412. In this case the ethernet packet received will be of length 15412 plus the ethernet header length. This patch fixes the issue where there is a check that RX packet length must not be more than max packet length. Fixes: bba787a860fa ("usb: gadget: ether: Allow jumbo frames") Signed-off-by: Manish Narani <manish.narani@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1605597215-122027-1-git-send-email-manish.narani@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02usb: gadget: u_ether: enable qmult on SuperSpeed Plus as wellLorenzo Colitti
The u_ether driver has a qmult setting that multiplies the transmit queue length (which by default is 2). The intent is that it should be enabled at high/super speed, but because the code does not explicitly check for USB_SUPER_PLUS, it is disabled at that speed. Fix this by ensuring that the queue multiplier is enabled for any wired link at high speed or above. Using >= for USB_SPEED_* constants seems correct because it is what the gadget_is_xxxspeed functions do. The queue multiplier substantially helps performance at higher speeds. On a direct SuperSpeed Plus link to a Linux laptop, iperf3 single TCP stream: Before (qmult=1): 1.3 Gbps After (qmult=5): 3.2 Gbps Fixes: 04617db7aa68 ("usb: gadget: add SS descriptors to Ethernet gadget") Reviewed-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-10usb: gadget: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707171500.GA13620@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: gadget: function: u_ether: Downgrade kerneldoc headers which to not ↵Lee Jones
make the mark Kerneldoc expects all function arguments to be documented. If any are missed it will complain. Downgrade one header with 3 missing argument descriptions and one which makes no attempt. Fixes the following W=1 kernel build warning(s): drivers/usb/gadget/function/u_ether.c:750: warning: Function parameter or member 'dev_addr' not described in 'gether_setup_name' drivers/usb/gadget/function/u_ether.c:750: warning: Function parameter or member 'host_addr' not described in 'gether_setup_name' drivers/usb/gadget/function/u_ether.c:750: warning: Function parameter or member 'qmult' not described in 'gether_setup_name' drivers/usb/gadget/function/u_ether.c:1022: warning: Function parameter or member 'dev' not described in 'gether_cleanup' Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200706133341.476881-6-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-20usb: Replace snprintf with scnprintf in gether_get_ifnameDaniel M German
snprintf returns the actual length of the buffer created; however, this is not the case if snprintf truncates its parameter. See https://lwn.net/Articles/69419/ for a detailed explanation. The current code correctly handles this case at the expense of extra code in the return statement. scnprintf does returns the actual length of the buffer created making the ?: operator unnecessary in the return statement. This change does not alter the functionality of the code. Signed-off-by: Daniel M German <dmg@turingmachine.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-18usb: gadget: ether: Fix race between gether_disconnect and rx_submitKiruthika Varadarajan
On spin lock release in rx_submit, gether_disconnect get a chance to run, it makes port_usb NULL, rx_submit access NULL port USB, hence null pointer crash. Fixed by releasing the lock in rx_submit after port_usb is used. Fixes: 2b3d942c4878 ("usb ethernet gadget: split out network core") Cc: <stable@vger.kernel.org> Signed-off-by: Kiruthika Varadarajan <Kiruthika.Varadarajan@harman.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-12-13net: dev: Add extack argument to dev_set_mac_address()Petr Machata
A follow-up patch will add a notifier type NETDEV_PRE_CHANGEADDR, which allows vetoing of MAC address changes. One prominent path to that notification is through dev_set_mac_address(). Therefore give this function an extack argument, so that it can be packed together with the notification. Thus a textual reason for rejection (or a warning) can be communicated back to the user. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-28usb: gadget: u_ether: fix unsafe list iterationMarek Szyprowski
list_for_each_entry_safe() is not safe for deleting entries from the list if the spin lock, which protects it, is released and reacquired during the list iteration. Fix this issue by replacing this construction with a simple check if list is empty and removing the first entry in each iteration. This is almost equivalent to a revert of the commit mentioned in the Fixes: tag. This patch fixes following issue: --->8--- Unable to handle kernel NULL pointer dereference at virtual address 00000104 pgd = (ptrval) [00000104] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 84 Comm: kworker/1:1 Not tainted 4.20.0-rc2-next-20181114-00009-g8266b35ec404 #1061 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events eth_work PC is at rx_fill+0x60/0xac LR is at _raw_spin_lock_irqsave+0x50/0x5c pc : [<c065fee0>] lr : [<c0a056b8>] psr: 80000093 sp : ee7fbee8 ip : 00000100 fp : 00000000 r10: 006000c0 r9 : c10b0ab0 r8 : ee7eb5c0 r7 : ee7eb614 r6 : ee7eb5ec r5 : 000000dc r4 : ee12ac00 r3 : ee12ac24 r2 : 00000200 r1 : 60000013 r0 : ee7eb5ec Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 6d5dc04a DAC: 00000051 Process kworker/1:1 (pid: 84, stack limit = 0x(ptrval)) Stack: (0xee7fbee8 to 0xee7fc000) ... [<c065fee0>] (rx_fill) from [<c0143b7c>] (process_one_work+0x200/0x738) [<c0143b7c>] (process_one_work) from [<c0144118>] (worker_thread+0x2c/0x4c8) [<c0144118>] (worker_thread) from [<c014a8a4>] (kthread+0x128/0x164) [<c014a8a4>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xee7fbfb0 to 0xee7fbff8) ... ---[ end trace 64480bc835eba7d6 ]--- Fixes: fea14e68ff5e ("usb: gadget: u_ether: use better list accessors") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15USB: Gadget Ethernet: Re-enable Jumbo frames.John Greb
Fixes: <b3e3893e1253> ("net: use core MTU range checking") which patched only one of two functions used to setup the USB Gadget Ethernet driver, causing a serious performance regression in the ability to increase mtu size above 1500. Signed-off-by: John Greb <h3x4m3r0n@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-11-07USB: gadget: function: Remove redundant license textGreg Kroah-Hartman
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Oliver Neukum <oneukum@suse.com> Cc: Johan Hovold <johan@kernel.org> Cc: Jerry Zhang <zhangjerry@google.com> Cc: John Keeping <john@metanate.com> Cc: Krzysztof Opasiak <k.opasiak@samsung.com> Cc: Abdulhadi Mohamed <abdulahhadi2@gmail.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-18usb: gadget: f_ncm/u_ether: Move 'SKB reserve' quirk setup to u_etherDmitry Osipenko
That quirk is required to make USB Ethernet gadget working on HW that can't cope with unaligned DMA. For some reason only f_ncm sets up that quirk, let's setup it directly in u_ether so other network models would have that quirk applied as well. All network models have been tested with ChipIdea UDC driver on NVIDIA Tegra20 SoC that require DMA to be aligned. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-04-11usb: gadget: u_ether: conditionally align transfer sizeFelipe Balbi
Unless HW sets quirk_ep_out_aligned_size, gadget driver shouldn't make any efforts towards aligning transfers. If the UDC needs, it *must* set the quirk flag. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-04-11usb: gadget: u_ether: use better list accessorsFelipe Balbi
We have helpers for some of these, let's rely on them instead of open coding what they do in u_ether.c Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: gadget: ether: Add \n to each attribute of ethernet functionsKrzysztof Opasiak
Generally in SysFS and ConfigFS files are new line terminated. Also most of USB functions adds a trailing newline to each attribute. Let's follow this convention also in ethernet functions. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-12-13Merge tag 'usb-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here's the big set of USB/PHY patches for 4.10-rc1. A number of new drivers are here in this set of changes. We have a new USB controller type "mtu3", a new usb-serial driver, and the usual churn in the gadget subsystem and the xhci host controller driver, along with a few other new small drivers added. And lots of little other changes all over the USB and PHY driver tree. Full details are in the shortlog All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (309 commits) USB: serial: option: add dlink dwm-158 USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041 USB: OHCI: nxp: fix code warnings USB: OHCI: nxp: remove useless extern declaration USB: OHCI: at91: remove useless extern declaration usb: misc: rio500: fix result type for error message usb: mtu3: fix U3 port link issue usb: mtu3: enable auto switch from U3 to U2 usbip: fix warning in vhci_hcd_probe/lockdep_init_map usb: core: usbport: Use proper LED API to fix potential crash usbip: add missing compile time generated files to .gitignore usb: hcd.h: construct hub class request constants from simpler constants USB: OHCI: ohci-pxa27x: remove useless functions USB: OHCI: omap: remove useless extern declaration USB: OHCI: ohci-omap: remove useless functions USB: OHCI: ohci-s3c2410: remove useless functions USB: cdc-acm: add device id for GW Instek AFG-125 fsl/usb: Workarourd for USB erratum-A005697 usb: hub: Wait for connection to be reestablished after port reset usbip: vudc: Refactor init_vudc_hw() to be more obvious ...
2016-11-18Merge tag 'usb-for-v4.10' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.10 merge window One big merge this time with a total of 166 non-merge commits. Most of the work, by far, is on dwc2 this time (68.2%) with dwc3 a far second (22.5%). The remaining 9.3% are scattered on gadget drivers. The most important changes for dwc2 are the peripheral side DMA support implemented by Synopsys folks and support for the new IOT dwc2 compatible core from Synopsys. In dwc3 land we have support for high-bandwidth, high-speed isochronous endpoints and some non-critical fixes for large scatter lists. Apart from these, we have our usual set of cleanups, non-critical fixes, etc.
2016-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-03usb: gadget: NCM: differentiate consumed packets from dropped packetsTorsten Polle
dev_kfree_skb_any() is used to free packets that are dropped by the network stack. Therefore the function should not be used for packets that have been successfully processed by the network stack. Instead dev_consume_skb_any() has to be used for such consumed packets. This separation helps to identify dropped packets. Signed-off-by: Torsten Polle <tpolle@de.adit-jv.com> Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-03usb: gadget: u_ether: link socket buffers to the device for received packetsTorsten Polle
Socket buffers should be linked to the (network) device that allocated the buffers. __netdev_alloc_skb performs this task. Signed-off-by: Torsten Polle <tpolle@de.adit-jv.com> Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-01usb: gadget: u_ether: remove interrupt throttlingFelipe Balbi
According to Dave Miller "the networking stack has a hard requirement that all SKBs which are transmitted must have their completion signalled in a fininte amount of time. This is because, until the SKB is freed by the driver, it holds onto socket, netfilter, and other subsystem resources." In summary, this means that using TX IRQ throttling for the networking gadgets is, at least, complex and we should avoid it for the time being. Cc: <stable@vger.kernel.org> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in misc driversJarod Wilson
firewire-net: - set min/max_mtu - remove fwnet_change_mtu nes: - set max_mtu - clean up nes_netdev_change_mtu xpnet: - set min/max_mtu - remove xpnet_dev_change_mtu hippi: - set min/max_mtu - remove hippi_change_mtu batman-adv: - set max_mtu - remove batadv_interface_change_mtu - initialization is a little async, not 100% certain that max_mtu is set in the optimal place, don't have hardware to test with rionet: - set min/max_mtu - remove rionet_change_mtu slip: - set min/max_mtu - streamline sl_change_mtu um/net_kern: - remove pointless ndo_change_mtu hsi/clients/ssi_protocol: - use core MTU range checking - remove now redundant ssip_pn_set_mtu ipoib: - set a default max MTU value - Note: ipoib's actual max MTU can vary, depending on if the device is in connected mode or not, so we'll just set the max_mtu value to the max possible, and let the ndo_change_mtu function continue to validate any new MTU change requests with checks for CM or not. Note that ipoib has no min_mtu set, and thus, the network core's mtu > 0 check is the only lower bounds here. mptlan: - use net core MTU range checking - remove now redundant mpt_lan_change_mtu fddi: - min_mtu = 21, max_mtu = 4470 - remove now redundant fddi_change_mtu (including export) fjes: - min_mtu = 8192, max_mtu = 65536 - The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to get past the core net MTU range checks so fjes_change_mtu can validate a new MTU against what it supports (see fjes_support_mtu in fjes_hw.c) hsr: - min_mtu = 0 (calls ether_setup, max_mtu is 1500) f_phonet: - min_mtu = 6, max_mtu = 65541 u_ether: - min_mtu = 14, max_mtu = 15412 phonet/pep-gprs: - min_mtu = 576, max_mtu = 65530 - remove redundant gprs_set_mtu CC: netdev@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: Stefan Richter <stefanr@s5r6.in-berlin.de> CC: Faisal Latif <faisal.latif@intel.com> CC: linux-rdma@vger.kernel.org CC: Cliff Whickman <cpw@sgi.com> CC: Robin Holt <robinmholt@gmail.com> CC: Jes Sorensen <jes@trained-monkey.org> CC: Marek Lindner <mareklindner@neomailbox.ch> CC: Simon Wunderlich <sw@simonwunderlich.de> CC: Antonio Quartulli <a@unstable.cc> CC: Sathya Prakash <sathya.prakash@broadcom.com> CC: Chaitra P B <chaitra.basappa@broadcom.com> CC: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> CC: MPT-FusionLinux.pdl@broadcom.com CC: Sebastian Reichel <sre@kernel.org> CC: Felipe Balbi <balbi@kernel.org> CC: Arvid Brodin <arvid.brodin@alten.se> CC: Remi Denis-Courmont <courmisch@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17usb: gadget: function: u_ether: don't starve tx request queueFelipe Balbi
If we don't guarantee that we will always get an interrupt at least when we're queueing our very last request, we could fall into situation where we queue every request with 'no_interrupt' set. This will cause the link to get stuck. The behavior above has been triggered with g_ether and dwc3. Cc: <stable@vger.kernel.org> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-19Revert "usb: gadget: NCM: Protect dev->port_usb using dev->lock"Greg Kroah-Hartman
This reverts commit c9ffc78745f89e300fe704348dd8e6800acf4d18 as it was reported to be broken. Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Jim Baxter <jim_baxter@mentor.com> Cc: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-09usb: gadget: NCM: Protect dev->port_usb using dev->lockHarish Jenny K N
This commit incorporates findings from https://lkml.org/lkml/2016/4/25/594 The function has been modified to make sure we hold the dev lock when accessing the net device pointer. Acked-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-09usb: gadget: u_ether: fix another dereference after null checkHarish Jenny K N
dev->port_usb is checked for null pointer previously, so dev->port_usb might be null during no zlp check, fix it by adding null pointer check. Acked-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: gadget: u_ether: add a flag to avoid skb_reserve() callingYoshihiro Shimoda
This patch adds a flag "no_skb_reserve" in struct eth_dev. So, if a peripheral driver sets the quirk_avoids_skb_reserve flag, upper network gadget drivers (e.g. f_ncm.c) can avoid skb_reserve() calling using the flag as well. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>