| Age | Commit message (Collapse) | Author |
|---|
|
Use 2-argument strscpy(), which is not only shorter but also provides
an additional check that destination buffer is an array.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/20241110210040.18918-2-andy.shevchenko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add the "marvell,pxa1908-padconf" compatible to allow migrating to a
separate pinctrl driver later.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/20241104-pxa1908-lkml-v13-3-e050609b8d6c@skole.hr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The PM8937 provides 4 MPPs.
Add a compatible to support them.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/20241031-msm8917-v2-4-8a075faa89b1@mainlining.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
PM8937 has 8 GPIO-s with holes on GPIO3, GPIO4 and GPIO6.
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/20241031-msm8917-v2-2-8a075faa89b1@mainlining.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20241104194437.327430-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.13-2
This includes following Intel pinctrl changes for v6.13 merge window:
- Expose DSW community on Elkhart Lake.
- Elaborate in the code comment the pull bias settings.
Both have been in linux-next with no reported issues.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.13 (take two)
- Use the gpiochip_populate_parent_fwspec_twocell() helper.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Hardware has a DSW (Deep Sleep Well) community that might be exposed
by some BIOSes. Add support for it in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Add a human readable decoder for pull bias values in the comment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Introduce pinctrl driver for EN7581 SoC. Current EN7581 pinctrl driver
supports the following functionalities:
- pin multiplexing
- pin pull-up, pull-down, open-drain, current strength,
{input,output}_enable, output_{low,high}
- gpio controller
- irq controller
Tested-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Co-developed-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/20241023-en7581-pinctrl-v9-5-afb0cbcab0ec@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v6.13
1. Add new pin controller drivers for new Samsung SoCs: Exynos8895,
Exynos9810, Exynos990.
2. Correct the condition when applying further interrupt constraints on
certain Samsung pin controllers. The condition was simply not
effective.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add drive strength configuration support for GPIO F and G groups.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/20241023104406.4083460-1-billy_tsai@aspeedtech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The map pointer is freed by pinctrl_utils_free_map(). It must not be a
devm_ pointer or it leads to a double free when the device is unloaded.
This is similar to a couple bugs Harshit Mogalapalli fixed earlier in
commits 3fd976afe974 ("pinctrl: nuvoton: fix a double free in
ma35_pinctrl_dt_node_to_map_func()") and 4575962aeed6 ("pinctrl: sophgo:
fix double free in cv1800_pctrl_dt_node_to_map()").
Fixes: a83c29e1d145 ("pinctrl: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/4b5f1306-dc01-4edc-96d3-b232b930ddf2@stanley.mountain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add Samsung Exynos9810 SoC specific data to enable pinctrl
support for platforms based on Exynos9810.
Co-developed-by: Maksym Holovach <nergzd@nergzd723.xyz>
Signed-off-by: Maksym Holovach <nergzd@nergzd723.xyz>
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20241026-exynos9810-v3-8-b89de9441ea8@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Because rzg2l_gpio_populate_parent_fwspec() and
gpiochip_populate_parent_fwspec_twocell() are identical.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241017113942.139712-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
When two client of the same gpio call pinctrl_select_state() for the
same functionality, we are seeing NULL pointer issue while accessing
desc->mux_owner.
Let's say two processes A, B executing in pin_request() for the same pin
and process A updates the desc->mux_usecount but not yet updated the
desc->mux_owner while process B see the desc->mux_usecount which got
updated by A path and further executes strcmp and while accessing
desc->mux_owner it crashes with NULL pointer.
Serialize the access to mux related setting with a mutex lock.
cpu0 (process A) cpu1(process B)
pinctrl_select_state() { pinctrl_select_state() {
pin_request() { pin_request() {
...
....
} else {
desc->mux_usecount++;
desc->mux_usecount && strcmp(desc->mux_owner, owner)) {
if (desc->mux_usecount > 1)
return 0;
desc->mux_owner = owner;
} }
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/20241014192930.1539673-1-quic_mojha@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), OF
can be enabled on all architectures. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
As ARM_SCMI_PROTOCOL already depends on COMPILE_TEST, we also don't
need to add COMPILE_TEST as an alternative dependency for it.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/20241022134017.172411db@endymion.delvare
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add driver for the pincontrol device as present on the Qualcomm
SAR2130P platform. This is based on the msm-5.10 tree, tag
KERNEL.PLATFORM.1.0.r4-00400-NEO.0.
Co-developed-by: Mayank Grover <groverm@codeaurora.org>
Signed-off-by: Mayank Grover <groverm@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/20241018-sar2130p-tlmm-v2-2-11a1d09a6e5f@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add support for QCS8300 TLMM configuration and control via the
pinctrl framework.
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Link: https://lore.kernel.org/20241018-qcs8300_tlmm-v3-2-8b8d3957cf1a@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.13
- Marks GPIOs as used on RZ/A1 and RZ/A2,
- Add open-drain and schmitt-trigger support on RZ/V2H(P),
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
SpacemiT's K1 SoC has a pinctrl controller which use single register
to describe all functions, which include bias pull up/down(strong pull),
drive strength, schmitter trigger, slew rate, mux mode.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/20241016-02-k1-pinctrl-v5-2-03d395222e4f@gentoo.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add SoC pinctrl configuration for the Exynos 990. The bank types
used are the same as Exynos 850, so we can reuse its macros.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Link: https://lore.kernel.org/r/20241016154838.64515-4-igor.belwon@mentallysanemainliners.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The initialization of muxtype deferences pointer func before func
is sanity checked with a null pointer check, hence we have a null
pointer deference issue. Fix this by only deferencing func with
the assignment to muxtype after func has been null pointer checked.
Fixes: 1fc30cd92770 ("pinctrl: th1520: Factor out casts")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reported-by: Kees Bakker <kees@ijzerbout.nl>
Acked-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/20241016155655.334518-1-colin.i.king@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fix typo in tristate definition of the SG2002 Pinctrl driver.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Link: https://lore.kernel.org/20241016-typo-pinctrl-sg2002-v1-1-2bdacb2d41e3@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The Canaan Kendryte K230 pin controller is only present on Canaan
Kendryte K230 SoCs. Hence add a dependency on ARCH_CANAAN, to prevent
asking the user about this driver when configuring a kernel without
Canaan Kendryte series SoC platform support.
Fixes: 545887eab6f6776a ("pinctrl: canaan: Add support for k230 SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/d70279ba02a67250203744b38314f4475b3c5671.1728986052.git.geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When compile-testing without CONfIG_OF:
drivers/pinctrl/pinctrl-th1520.c: In function 'th1520_pinctrl_dt_node_to_map':
drivers/pinctrl/pinctrl-th1520.c:455:23: error: implicit declaration of function 'pinconf_generic_parse_dt_config'; did you mean 'pinconf_generic_dump_config'? [-Wimplicit-function-declaration]
455 | ret = pinconf_generic_parse_dt_config(child, pctldev, &configs, &nconfigs);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| pinconf_generic_dump_config
Enforce this using Kconig dependencies.
Fixes: bed5cd6f8a98 ("pinctrl: Add driver for the T-Head TH1520 SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/20241015151126.2401855-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add explicit selection of the PINCTRL_RZG2L config option for the
RZ/V2H(P) (R9A09G057) SoC, ensuring pin control driver is enabled
for this SoC.
Fixes: 9bd95ac86e70 ("pinctrl: renesas: rzg2l: Add support for RZ/V2H SoC")
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241010132726.702658-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for configuring the multiplexed pins as schmitt-trigger
inputs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/20241004123658.764557-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for enabling and disabling open-drain outputs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/20241004123658.764557-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The current implementation only calls chained_irq_enter() and
chained_irq_exit() if it detects pending interrupts.
```
for (i = 0; i < info->stride; i++) {
uregmap_read(info->map, id_reg + 4 * i, ®);
if (!reg)
continue;
chained_irq_enter(parent_chip, desc);
```
However, in case of GPIO pin configured in level mode and the parent
controller configured in edge mode, GPIO interrupt might be lowered by the
hardware. In the result, if the interrupt is short enough, the parent
interrupt is still pending while the GPIO interrupt is cleared;
chained_irq_enter() never gets called and the system hangs trying to
service the parent interrupt.
Moving chained_irq_enter() and chained_irq_exit() outside the for loop
ensures that they are called even when GPIO interrupt is lowered by the
hardware.
The similar code with chained_irq_enter() / chained_irq_exit() functions
wrapping interrupt checking loop may be found in many other drivers:
```
grep -r -A 10 chained_irq_enter drivers/pinctrl
```
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Matsievskiy <matsievskiysv@gmail.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/20241012105743.12450-2-matsievskiysv@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
'new_map' is allocated using devm_* which takes care of freeing the
allocated data on device removal, call to
.dt_free_map = pinconf_generic_dt_free_map
double frees the map as pinconf_generic_dt_free_map() calls
pinctrl_utils_free_map().
Fix this by using kcalloc() instead of auto-managed devm_kcalloc().
Cc: stable@vger.kernel.org
Fixes: f805e356313b ("pinctrl: nuvoton: Add ma35d1 pinctrl and GPIO driver")
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/20241010205237.1245318-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Found those two while reading the code:
EDGE_TRAGGER -> EDGE_TRIGGER
BOTH_EADGE -> BOTH_EDGES
No functional changes, compile tested only.
Signed-off-by: Marc Ferland <marc.ferland@sonatest.com>
Link: https://lore.kernel.org/20241009151249.2086702-1-marc.ferland@sonatest.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/pinctrl to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/20241007205803.444994-8-u.kleine-koenig@baylibre.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Limit the casts to get the mux data and flags from the driver data
pointer with each pin to two inline functions as requested by Andy
during review.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Drew Fustini <dfustini@tenstorrent.com>
Tested-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/20241011144826.381104-4-emil.renner.berthing@canonical.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When Drew took over the pinctrl driver it seems like he didn't use the
git tree I pointed him at and thus missed some important fixes to the
tables describing valid pinmux settings.
The documentation has a nice overview table of these settings but
unfortunately it doesn't fully match the register descriptions, which
seem to be the correct version.
Fixes: bed5cd6f8a98 ("pinctrl: Add driver for the T-Head TH1520 SoC")
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Drew Fustini <dfustini@tenstorrent.com>
Tested-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/20241011144826.381104-3-emil.renner.berthing@canonical.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When Drew took over the pinctrl driver he must have changed
all the -ENOTSUPP returns into -EOPNOTSUPP. This subtle change
was most likely not spotted because it was never mentioned in the
changelog of the patchset, but it breaks all the places in the
pin control and GPIO frameworks where -ENOTSUPP is expected.
Fixes: bed5cd6f8a98 ("pinctrl: Add driver for the T-Head TH1520 SoC")
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Drew Fustini <dfustini@tenstorrent.com>
Tested-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/20241011144826.381104-2-emil.renner.berthing@canonical.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The 'node' member has never been part of this structure so drop its
description.
Fixes: 8b242ca700f8 ("pinctrl: Add Xilinx ZynqMP pinctrl driver support")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20241010080432.7781-1-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The parameters' descriptions are wrong, drop the invalid ones and
document the ones that are missing the description.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20241010080347.7759-1-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
'map' is allocated using devm_* which takes care of freeing the allocated
data, but in error paths there is a call to pinctrl_utils_free_map()
which also does kfree(map) which leads to a double free.
Use kcalloc() instead of devm_kcalloc() as freeing is manually handled.
Fixes: a29d8e93e710 ("pinctrl: sophgo: add support for CV1800B SoC")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/20241010111830.3474719-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Added definitions for some pins which were missing from the
S32G2 SIUL2 pinctrl driver. These pins are used by the JTAG,
PFE and LLCE hardware modules.
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
Link: https://lore.kernel.org/20241002135920.3647322-2-andrei.stefanescu@oss.nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Convert th1520_pinctrl_dt_node_to_map() to use a scoped iterator with
for_each_available_child_of_node_scoped(). As a result, there is no need
to call of_node_put() anymore. The put_child label has been renamed to
free_map which is now a more accurate description.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/20241008-th1520-pinctrl-fixes-v3-3-5b60db446a49@tenstorrent.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Convert th1520_pinctrl_dt_node_to_map() to use guarded mutex for
thp->mutex.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/20241008-th1520-pinctrl-fixes-v3-2-5b60db446a49@tenstorrent.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fix th1520_pinctrl_dt_node_to_map() to set the return value before
jumping to free_configs when an unknown pin error occurs.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202410022336.xyWlV0Tf-lkp@intel.com/
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/20241008-th1520-pinctrl-fixes-v3-1-5b60db446a49@tenstorrent.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fix the missing return statement in the error path of
rzg2l_pinctrl_register().
Fixes: f73f63b24491fa43 ("pinctrl: renesas: rzg2l: Use dev_err_probe()")
Reported-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Closes: https://lore.kernel.org/all/OS0PR01MB638837327E5487B71D88A70392712@OS0PR01MB6388.jpnprd01.prod.outlook.com/
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241003082550.33341-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The RZ/V2H(P) SoC has 16 IRQ interrupts, while every other SoC has 8,
and this affects the start index of TINT interrupts (1 + 16 = 17, rather
than 1 + 8 = 9).
Macro RZG2L_TINT_IRQ_START_INDEX cannot work anymore, replace it with a
new member within struct rzg2l_hwcfg.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/20240930145244.356565-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The build robot complains about unused code. Let's drop it,
this can be restored with simple git revert when needed.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410021136.ie3cFM2w-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20241003-k320-unused-v1-1-72e65bc2f27b@linaro.org
|
|
The "PC" define is colliding with the (apparently broadcased)
define for "program counter" on Loongarch, so let's rename all
these 2-letter defines so they don't collide with stuff.
Fixes: a55222b7a132 ("pinctrl: freescale: enable use with COMPILE_TEST")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410030214.dPrgmUqd-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20241003-fix-imx27-pc-v1-1-0e78d1fc6175@linaro.org
|
|
Simplifies probe by removing all gotos and removing mutex_destroy from
_remove.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://lore.kernel.org/20241003214746.146207-1-rosenp@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Otherwise the mutex remains after a failed kzalloc.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://lore.kernel.org/20241001212724.309320-1-rosenp@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When PINCTRL_IMX_SCU was selected by PINCTRL_IMX8DXL or PINCTRL_IMX8QM
combined with COMPILE_TEST on a non-arm platforms, the IMX_SCU
dependency could not be enabled.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410031439.GyTSa0kX-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202410030852.q0Hukplf-lkp@intel.com/
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/20241003-imx-pinctrl-compile-test-fix-v1-1-145ca1948cc3@geanix.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
