| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Improve API to make it clear that mmc_hw_reset() is for cards
- Fixup support for writeback-cache for eMMC and SD
- Check for errors after writes on SPI
MMC host:
- renesas_sdhi: A couple of fixes of TAP settings for eMMC HS400 mode
- mmci_stm32: Fixup check of all elements in sg list
- sdhci-xenon: Revert unnecessary fix for annoying 1.8V regulator warning"
* tag 'mmc-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: improve API to make clear mmc_hw_reset is for cards
mmc: renesas_sdhi: don't overwrite TAP settings when HS400 tuning is complete
mmc: renesas_sdhi: special 4tap settings only apply to HS400
mmc: core: Fixup support for writeback-cache for eMMC and SD
mmc: block: Check for errors after write on SPI
mmc: mmci: stm32: correctly check all elements of sg list
Revert "mmc: sdhci-xenon: fix annoying 1.8V regulator warning"
|
|
To make it unambiguous that mmc_hw_reset() is for cards and not for
controllers, we make the function argument mmc_card instead of mmc_host.
Also, all users are converted.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408080045.6497-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - new code bugs:
- mctp: correct mctp_i2c_header_create result
- eth: fungible: fix reference to __udivdi3 on 32b builds
- eth: micrel: remove latencies support lan8814
Previous releases - regressions:
- bpf: resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT
- vrf: fix packet sniffing for traffic originating from ip tunnels
- rxrpc: fix a race in rxrpc_exit_net()
- dsa: revert "net: dsa: stop updating master MTU from master.c"
- eth: ice: fix MAC address setting
Previous releases - always broken:
- tls: fix slab-out-of-bounds bug in decrypt_internal
- bpf: support dual-stack sockets in bpf_tcp_check_syncookie
- xdp: fix coalescing for page_pool fragment recycling
- ovs: fix leak of nested actions
- eth: sfc:
- add missing xdp queue reinitialization
- fix using uninitialized xdp tx_queue
- eth: ice:
- clear default forwarding VSI during VSI release
- fix broken IFF_ALLMULTI handling
- synchronize_rcu() when terminating rings
- eth: qede: confirm skb is allocated before using
- eth: aqc111: fix out-of-bounds accesses in RX fixup
- eth: slip: fix NPD bug in sl_tx_timeout()"
* tag 'net-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
drivers: net: slip: fix NPD bug in sl_tx_timeout()
bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets
bpf: Support dual-stack sockets in bpf_tcp_check_syncookie
myri10ge: fix an incorrect free for skb in myri10ge_sw_tso
net: usb: aqc111: Fix out-of-bounds accesses in RX fixup
qede: confirm skb is allocated before using
net: ipv6mr: fix unused variable warning with CONFIG_IPV6_PIMSM_V2=n
net: phy: mscc-miim: reject clause 45 register accesses
net: axiemac: use a phandle to reference pcs_phy
dt-bindings: net: add pcs-handle attribute
net: axienet: factor out phy_node in struct axienet_local
net: axienet: setup mdio unconditionally
net: sfc: fix using uninitialized xdp tx_queue
rxrpc: fix a race in rxrpc_exit_net()
net: openvswitch: fix leak of nested actions
net: ethernet: mv643xx: Fix over zealous checking of_get_mac_address()
net: openvswitch: don't send internal clone attribute to the userspace.
net: micrel: Fix KS8851 Kconfig
ice: clear cmd_type_offset_bsz for TX rings
ice: xsk: fix VSI state check in ice_xsk_wakeup()
...
|
|
When a slip driver is detaching, the slip_close() will act to
cleanup necessary resources and sl->tty is set to NULL in
slip_close(). Meanwhile, the packet we transmit is blocked,
sl_tx_timeout() will be called. Although slip_close() and
sl_tx_timeout() use sl->lock to synchronize, we don`t judge
whether sl->tty equals to NULL in sl_tx_timeout() and the
null pointer dereference bug will happen.
(Thread 1) | (Thread 2)
| slip_close()
| spin_lock_bh(&sl->lock)
| ...
... | sl->tty = NULL //(1)
sl_tx_timeout() | spin_unlock_bh(&sl->lock)
spin_lock(&sl->lock); |
... | ...
tty_chars_in_buffer(sl->tty)|
if (tty->ops->..) //(2) |
... | synchronize_rcu()
We set NULL to sl->tty in position (1) and dereference sl->tty
in position (2).
This patch adds check in sl_tx_timeout(). If sl->tty equals to
NULL, sl_tx_timeout() will goto out.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20220405132206.55291-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All remaining skbs should be released when myri10ge_xmit fails to
transmit a packet. Fix it within another skb_list_walk_safe.
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
aqc111_rx_fixup() contains several out-of-bounds accesses that can be
triggered by a malicious (or defective) USB device, in particular:
- The metadata array (desc_offset..desc_offset+2*pkt_count) can be out of bounds,
causing OOB reads and (on big-endian systems) OOB endianness flips.
- A packet can overlap the metadata array, causing a later OOB
endianness flip to corrupt data used by a cloned SKB that has already
been handed off into the network stack.
- A packet SKB can be constructed whose tail is far beyond its end,
causing out-of-bounds heap data to be considered part of the SKB's
data.
Found doing variant analysis. Tested it with another driver (ax88179_178a), since
I don't have a aqc111 device to test it, but the code looks very similar.
Signed-off-by: Marcin Kozlowski <marcinguy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
qede_build_skb() assumes build_skb() always works and goes straight
to skb_reserve(). However, build_skb() can fail under memory pressure.
This results in a kernel panic because the skb to reserve is NULL.
Add a check in case build_skb() failed to allocate and return NULL.
The NULL return is handled correctly in callers to qede_build_skb().
Fixes: 8a8633978b842 ("qede: Add build_skb() support.")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-04-05
Maciej Fijalkowski says:
We were solving issues around AF_XDP busy poll's not-so-usual scenarios,
such as very big busy poll budgets applied to very small HW rings. This
set carries the things that were found during that work that apply to
net tree.
One thing that was fixed for all in-tree ZC drivers was missing on ice
side all the time - it's about syncing RCU before destroying XDP
resources. Next one fixes the bit that is checked in ice_xsk_wakeup and
third one avoids false setting of DD bits on Tx descriptors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver doesn't support clause 45 register access yet, but doesn't
check if the access is a c45 one either. This leads to spurious register
reads and writes. Add the check.
Fixes: 542671fe4d86 ("net: phy: mscc-miim: Add MDIO driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some SGMII use cases where both a fixed link external PHY and the
internal PCS/PMA PHY need to be configured, we should explicitly use a
phandle "pcs-phy" to get the reference to the PCS/PMA PHY. Otherwise, the
driver would use "phy-handle" in the DT as the reference to both the
external and the internal PCS/PMA PHY.
In other cases where the core is connected to a SFP cage, we could still
point phy-handle to the intenal PCS/PMA PHY, and let the driver connect
to the SFP module, if exist, via phylink.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the struct member `phy_node` of struct axienet_local is not used by the
driver anymore after initialization. It might be a remnent of old code
and could be removed.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The call to axienet_mdio_setup should not depend on whether "phy-node"
pressents on the DT. Besides, since `lp->phy_node` is used if PHY is in
SGMII or 100Base-X modes, move it into the if statement. And the next patch
will remove `lp->phy_node` from driver's private structure and do an
of_node_put on it right away after use since it is not used elsewhere.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some cases, xdp tx_queue can get used before initialization.
1. interface up/down
2. ring buffer size change
When CPU cores are lower than maximum number of channels of sfc driver,
it creates new channels only for XDP.
When an interface is up or ring buffer size is changed, all channels
are initialized.
But xdp channels are always initialized later.
So, the below scenario is possible.
Packets are received to rx queue of normal channels and it is acted
XDP_TX and tx_queue of xdp channels get used.
But these tx_queues are not initialized yet.
If so, TX DMA or queue error occurs.
In order to avoid this problem.
1. initializes xdp tx_queues earlier than other rx_queue in
efx_start_channels().
2. checks whether tx_queue is initialized or not in efx_xdp_tx_buffers().
Splat looks like:
sfc 0000:08:00.1 enp8s0f1np1: TX queue 10 spurious TX completion id 250
sfc 0000:08:00.1 enp8s0f1np1: resetting (RECOVER_OR_ALL)
sfc 0000:08:00.1 enp8s0f1np1: MC command 0x80 inlen 100 failed rc=-22
(raw=22) arg=789
sfc 0000:08:00.1 enp8s0f1np1: has been disabled
Fixes: f28100cb9c96 ("sfc: fix lack of XDP TX queues - error XDP TX failed (-22)")
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is often not a MAC address available in an EEPROM accessible by
Linux with Marvell devices. Instead the bootload has the MAC address
and directly programs it into the hardware. So don't consider an error
from of_get_mac_address() has fatal. However, the check was added for
the case where there is a MAC address in an the EEPROM, but the EEPROM
has not probed yet, and -EPROBE_DEFER is returned. In that case the
error should be returned. So make the check specific to this error
code.
Cc: Mauri Sandberg <maukka@ext.kapsi.fi>
Reported-by: Thomas Walther <walther-it@gmx.de>
Fixes: 42404d8f1c01 ("net: mv643xx_eth: process retval from of_get_mac_address")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220405000404.3374734-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KS8851 selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL, so
make KS8851 also depend on PTP_1588_CLOCK_OPTIONAL.
Fixes kconfig warning and build errors:
WARNING: unmet direct dependencies detected for MICREL_PHY
Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
Selected by [y]:
- KS8851 [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && SPI [=y]
ld.lld: error: undefined symbol: ptp_clock_register referenced by micrel.c
net/phy/micrel.o:(lan8814_probe) in archive drivers/built-in.a
ld.lld: error: undefined symbol: ptp_clock_index referenced by micrel.c
net/phy/micrel.o:(lan8814_ts_info) in archive drivers/built-in.a
Reported-by: kernel test robot <lkp@intel.com>
Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220405065936.4105272-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently when XDP rings are created, each descriptor gets its DD bit
set, which turns out to be the wrong approach as it can lead to a
situation where more descriptors get cleaned than it was supposed to,
e.g. when AF_XDP busy poll is run with a large batch size. In this
situation, the driver would request for more buffers than it is able to
handle.
Fix this by not setting the DD bits in ice_xdp_alloc_setup_rings(). They
should be initialized to zero instead.
Fixes: 9610bd988df9 ("ice: optimize XDP_TX workloads")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ICE_DOWN is dedicated for pf->state. Check for ICE_VSI_DOWN being set on
vsi->state in ice_xsk_wakeup().
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Unfortunately, the ice driver doesn't respect the RCU critical section that
XSK wakeup is surrounded with. To fix this, add synchronize_rcu() calls to
paths that destroy resources that might be in use.
This was addressed in other AF_XDP ZC enabled drivers, for reference see
for example commit b3873a5be757 ("net/i40e: Fix concurrency issues
between config flow and XSK")
Fixes: efc2214b6047 ("ice: Add support for XDP")
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Disable check for queue being enabled in ice_vc_dis_qs_msg, because
there could be a case when queues were created, but were not enabled.
We still need to delete those queues.
Normal workflow for VF looks like:
Enable path:
VIRTCHNL_OP_ADD_ETH_ADDR (opcode 10)
VIRTCHNL_OP_CONFIG_VSI_QUEUES (opcode 6)
VIRTCHNL_OP_ENABLE_QUEUES (opcode 8)
Disable path:
VIRTCHNL_OP_DISABLE_QUEUES (opcode 9)
VIRTCHNL_OP_DEL_ETH_ADDR (opcode 11)
The issue appears only in stress conditions when VF is enabled and
disabled very fast.
Eventually there will be a case, when queues are created by
VIRTCHNL_OP_CONFIG_VSI_QUEUES, but are not enabled by
VIRTCHNL_OP_ENABLE_QUEUES.
In turn, these queues are not deleted by VIRTCHNL_OP_DISABLE_QUEUES,
because there is a check whether queues are enabled in
ice_vc_dis_qs_msg.
When we bring up the VF again, we will see the "Failed to set LAN Tx queue
context" error during VIRTCHNL_OP_CONFIG_VSI_QUEUES step. This
happens because old 16 queues were not deleted and VF requests to create
16 more, but ice_sched_get_free_qparent in ice_ena_vsi_txq would fail to
find a parent node for first newly requested queue (because all nodes
are allocated to 16 old queues).
Testing Hints:
Just enable and disable VF fast enough, so it would be disabled before
reaching VIRTCHNL_OP_ENABLE_QUEUES.
while true; do
ip link set dev ens785f0v0 up
sleep 0.065 # adjust delay value for you machine
ip link set dev ens785f0v0 down
done
Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap")
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When VF is freshly created, but not brought up, ring->txq_teid
value is by default set to 0.
But 0 is a valid TEID. On some platforms the Root Node of
Tx scheduler has a TEID = 0. This can cause issues as shown below.
The proper way is to set ring->txq_teid to ICE_INVAL_TEID (0xFFFFFFFF).
Testing Hints:
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
ip link set dev ens785f0v0 up
ip link set dev ens785f0v0 down
If we have freshly created VF and quickly turn it on and off, so there
would be no time to reach VIRTCHNL_OP_CONFIG_VSI_QUEUES stage, then
VIRTCHNL_OP_DISABLE_QUEUES stage will fail with error:
[ 639.531454] disable queue 89 failed 14
[ 639.532233] Failed to disable LAN Tx queues, error: ICE_ERR_AQ_ERROR
[ 639.533107] ice 0000:02:00.0: Failed to stop Tx ring 0 on VSI 5
The reason for the fail is that we are trying to send AQ command to
delete queue 89, which has never been created and receive an "invalid
argument" error from firmware.
As this queue has never been created, it's teid and ring->txq_teid
have default value 0.
ice_dis_vsi_txq has a check against non-existent queues:
node = ice_sched_find_node_by_teid(pi->root, q_teids[i]);
if (!node)
continue;
But on some platforms the Root Node of Tx scheduler has a teid = 0.
Hence, ice_sched_find_node_by_teid finds a node with teid = 0 (it is
pi->root), and we go further to submit an erroneous request to firmware.
Fixes: 37bb83901286 ("ice: Move common functions out of ice_main.c part 7/7")
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This node pointer is returned by of_find_compatible_node() with
refcount incremented. Calling of_node_put() to aovid the refcount leak.
Fixes: d346c9e86d86 ("dpaa2-ptp: reuse ptp_qoriq driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220404125336.13427-1-linmq006@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When the page_ring is not used page_ptr_mask is 0.
Do not dereference page_ring[0] in this case.
Fixes: 2768935a4660 ("sfc: reuse pages to avoid DMA mapping/unmapping costs")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Smatch reports this issue
dwmac-loongson.c:208:19: warning: symbol
'loongson_dwmac_driver' was not declared.
Should it be static?
loongson_dwmac_driver is only used in dwmac-loongson.c.
File scope variables used only in one file should
be static. Change loongson_dwmac_driver's
storage-class-specifier from global to static.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add checks in the XDP redirect callback to prevent XDP from running when
the TX ring is undergoing shutdown.
Also remove redundant checks in the XDP redirect callback to validate the
txr and the flag that indicates the ring supports XDP. The modulo
arithmetic on 'tx_nr_rings_xdp' already guarantees the derived TX
ring is an XDP ring. txr is also guaranteed to be valid after checking
BNXT_STATE_OPEN and within RCU grace period.
Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support")
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Insufficient space was being reserved in the page used for packet
reception, so the interface MTU could be set too large to still have
room for the contents of the packet when doing XDP redirect. This
resulted in the following message when redirecting a packet between
3520 and 3822 bytes with an MTU of 3822:
[311815.561880] XDP_WARN: xdp_update_frame_from_buff(line:200): Driver BUG: missing reserved tailroom
Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If there are more CPUs than the number of TX XDP rings, multiple XDP
redirects can select the same TX ring based on the CPU on which
XDP redirect is called. Add locking when needed and use static
key to decide whether to take the lock.
Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support")
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To fix a coverity complain, commit d5ac07dfbd2b
("qed: Initialize debug string array") removed "sw-platform"
(one of the common global parameters) from the dump as this
was used in the dump with an uninitialized string, however
it did not reduce the number of common global parameters
which caused the incorrect (unable to parse) register dump
this patch fixes it with reducing NUM_COMMON_GLOBAL_PARAMS
bye one.
Cc: stable@vger.kernel.org
Cc: Tim Gardner <tim.gardner@canonical.com>
Cc: "David S. Miller" <davem@davemloft.net>
Fixes: d5ac07dfbd2b ("qed: Initialize debug string array")
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Reviewed-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the PHY and the MAC are capable of doing timestamping, the PHY has
priority. Therefore the DT option lan8814,ignore-ts was added such that
the PHY will not expose a PHC so then the timestamping was done in the
MAC. This is not the correct approach of doing it, therefore remove
this.
Fixes: ece19502834d84 ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Based on the discussions here[1], the PHY driver is the wrong place
to set the latencies, therefore remove them.
[1] https://lkml.org/lkml/2022/3/4/325
Fixes: ece19502834d84 ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit 9cbadf094d9d ("net: stmmac: support max-speed device tree
property"), when DT platforms don't set "max-speed", max_speed is set to
-1; for non-DT platforms, it stays the default 0.
Prior to commit eeef2f6b9f6e ("net: stmmac: Start adding phylink support"),
the check for a valid max_speed setting was to check if it was greater
than zero. This commit got it right, but subsequent patches just checked
for non-zero, which is incorrect for DT platforms.
In commit 92c3807b9ac3 ("net: stmmac: convert to phylink_get_linkmodes()")
the conversion switched completely to checking for non-zero value as a
valid value, which caused 1000base-T to stop getting advertised by
default.
Instead of trying to fix all the checks, simply leave max_speed alone if
DT property parsing fails.
Fixes: 9cbadf094d9d ("net: stmmac: support max-speed device tree property")
Fixes: 92c3807b9ac3 ("net: stmmac: convert to phylink_get_linkmodes()")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220331184832.16316-1-wens@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
32b builds with CONFIG_PHYS_ADDR_T_64BIT=y, such as i386 PAE,
raise a linker error due to a 64b division:
ld: drivers/net/ethernet/fungible/funcore/fun_dev.o: in function
`fun_dev_enable':
(.text+0xe1a): undefined reference to `__udivdi3'
The divisor in the offendinng expression is a power of 2. Change it to
use an explicit right shift.
Fixes: e1ffcc66818f ("net/fungible: Add service module for Fungible drivers")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Link: https://lore.kernel.org/r/20220401232411.313881-1-dmichail@fungible.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KS8851_MLL selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL,
so make KS8851_MLL also depend on PTP_1588_CLOCK_OPTIONAL since
'select' does not follow any dependency chains.
Fixes kconfig warning and build errors:
WARNING: unmet direct dependencies detected for MICREL_PHY
Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
Selected by [y]:
- KS8851_MLL [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && HAS_IOMEM [=y]
ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info':
micrel.c:(.text+0xb35): undefined reference to `ptp_clock_index'
ld: drivers/net/phy/micrel.o: in function `lan8814_probe':
micrel.c:(.text+0x2586): undefined reference to `ptp_clock_register'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
header_ops.create should return the length of the header,
instead mctp_i2c_head_create() returned 0.
This didn't cause any problem because the MCTP stack accepted
0 as success.
Fixes: f5b8abf9fc3d ("mctp i2c: MCTP I2C binding driver")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Handling of all-multicast flag and associated multicast promiscuous
mode is broken in ice driver. When an user switches allmulticast
flag on or off the driver checks whether any VLANs are configured
over the interface (except default VLAN 0).
If any extra VLANs are registered it enables multicast promiscuous
mode for all these VLANs (including default VLAN 0) using
ICE_SW_LKUP_PROMISC_VLAN look-up type. In this situation all
multicast packets tagged with known VLAN ID or untagged are received
and multicast packets tagged with unknown VLAN ID ignored.
If no extra VLANs are registered (so only VLAN 0 exists) it enables
multicast promiscuous mode for VLAN 0 and uses ICE_SW_LKUP_PROMISC
look-up type. In this situation any multicast packets including
tagged ones are received.
The driver handles IFF_ALLMULTI in ice_vsi_sync_fltr() this way:
ice_vsi_sync_fltr() {
...
if (changed_flags & IFF_ALLMULTI) {
if (netdev->flags & IFF_ALLMULTI) {
if (vsi->num_vlans > 1)
ice_set_promisc(..., ICE_MCAST_VLAN_PROMISC_BITS);
else
ice_set_promisc(..., ICE_MCAST_PROMISC_BITS);
} else {
if (vsi->num_vlans > 1)
ice_clear_promisc(..., ICE_MCAST_VLAN_PROMISC_BITS);
else
ice_clear_promisc(..., ICE_MCAST_PROMISC_BITS);
}
}
...
}
The code above depends on value vsi->num_vlan that specifies number
of VLANs configured over the interface (including VLAN 0) and
this is problem because that value is modified in NDO callbacks
ice_vlan_rx_add_vid() and ice_vlan_rx_kill_vid().
Scenario 1:
1. ip link set ens7f0 allmulticast on
2. ip link add vlan10 link ens7f0 type vlan id 10
3. ip link set ens7f0 allmulticast off
4. ip link set ens7f0 allmulticast on
[1] In this scenario IFF_ALLMULTI is enabled and the driver calls
ice_set_promisc(..., ICE_MCAST_PROMISC_BITS) that installs
multicast promisc rule with non-VLAN look-up type.
[2] Then VLAN with ID 10 is added and vsi->num_vlan incremented to 2
[3] Command switches IFF_ALLMULTI off and the driver calls
ice_clear_promisc(..., ICE_MCAST_VLAN_PROMISC_BITS) but this
call is effectively NOP because it looks for multicast promisc
rules for VLAN 0 and VLAN 10 with VLAN look-up type but no such
rules exist. So the all-multicast remains enabled silently
in hardware.
[4] Command tries to switch IFF_ALLMULTI on and the driver calls
ice_clear_promisc(..., ICE_MCAST_PROMISC_BITS) but this call
fails (-EEXIST) because non-VLAN multicast promisc rule already
exists.
Scenario 2:
1. ip link add vlan10 link ens7f0 type vlan id 10
2. ip link set ens7f0 allmulticast on
3. ip link add vlan20 link ens7f0 type vlan id 20
4. ip link del vlan10 ; ip link del vlan20
5. ip link set ens7f0 allmulticast off
[1] VLAN with ID 10 is added and vsi->num_vlan==2
[2] Command switches IFF_ALLMULTI on and driver installs multicast
promisc rules with VLAN look-up type for VLAN 0 and 10
[3] VLAN with ID 20 is added and vsi->num_vlan==3 but no multicast
promisc rules is added for this new VLAN so the interface does
not receive MC packets from VLAN 20
[4] Both VLANs are removed but multicast rule for VLAN 10 remains
installed so interface receives multicast packets from VLAN 10
[5] Command switches IFF_ALLMULTI off and because vsi->num_vlan is 1
the driver tries to remove multicast promisc rule for VLAN 0
with non-VLAN look-up that does not exist.
All-multicast looks disabled from user point of view but it
is partially enabled in HW (interface receives all multicast
packets either untagged or tagged with VLAN ID 10)
To resolve these issues the patch introduces these changes:
1. Adds handling for IFF_ALLMULTI to ice_vlan_rx_add_vid() and
ice_vlan_rx_kill_vid() callbacks. So when VLAN is added/removed
and IFF_ALLMULTI is enabled an appropriate multicast promisc
rule for that VLAN ID is added/removed.
2. In ice_vlan_rx_add_vid() when first VLAN besides VLAN 0 is added
so (vsi->num_vlan == 2) and IFF_ALLMULTI is enabled then look-up
type for existing multicast promisc rule for VLAN 0 is updated
to ICE_MCAST_VLAN_PROMISC_BITS.
3. In ice_vlan_rx_kill_vid() when last VLAN besides VLAN 0 is removed
so (vsi->num_vlan == 1) and IFF_ALLMULTI is enabled then look-up
type for existing multicast promisc rule for VLAN 0 is updated
to ICE_MCAST_PROMISC_BITS.
4. Both ice_vlan_rx_{add,kill}_vid() have to run under ICE_CFG_BUSY
bit protection to avoid races with ice_vsi_sync_fltr() that runs
in ice_service_task() context.
5. Bit ICE_VSI_VLAN_FLTR_CHANGED is use-less and can be removed.
6. Error messages added to ice_fltr_*_vsi_promisc() helper functions
to avoid them in their callers
7. Small improvements to increase readability
Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 2ccc1c1ccc671b ("ice: Remove excess error variables") merged
the usage of 'status' and 'err' variables into single one in
function ice_set_mac_address(). Unfortunately this causes
a regression when call of ice_fltr_add_mac() returns -EEXIST because
this return value does not indicate an error in this case but
value of 'err' remains to be -EEXIST till the end of the function
and is returned to caller.
Prior mentioned commit this does not happen because return value of
ice_fltr_add_mac() was stored to 'status' variable first and
if it was -EEXIST then 'err' remains to be zero.
Fix the problem by reset 'err' to zero when ice_fltr_add_mac()
returns -EEXIST.
Fixes: 2ccc1c1ccc671b ("ice: Remove excess error variables")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
VSI is set as default forwarding one when promisc mode is set for
PF interface, when PF is switched to switchdev mode or when VF
driver asks to enable allmulticast or promisc mode for the VF
interface (when vf-true-promisc-support priv flag is off).
The third case is buggy because in that case VSI associated with
VF remains as default one after VF removal.
Reproducer:
1. Create VF
echo 1 > sys/class/net/ens7f0/device/sriov_numvfs
2. Enable allmulticast or promisc mode on VF
ip link set ens7f0v0 allmulticast on
ip link set ens7f0v0 promisc on
3. Delete VF
echo 0 > sys/class/net/ens7f0/device/sriov_numvfs
4. Try to enable promisc mode on PF
ip link set ens7f0 promisc on
Although it looks that promisc mode on PF is enabled the opposite
is true because ice_vsi_sync_fltr() responsible for IFF_PROMISC
handling first checks if any other VSI is set as default forwarding
one and if so the function does not do anything. At this point
it is not possible to enable promisc mode on PF without re-probe
device.
To resolve the issue this patch clear default forwarding VSI
during ice_vsi_release() when the VSI to be released is the default
one.
Fixes: 01b5e89aab49 ("ice: Add VF promiscuous support")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
in commit 048939088220
("vrf: add mac header for tunneled packets when sniffer is attached")
an Ethernet header was cooked for traffic originating from tunnel devices.
However, the header is added based on whether the mac_header is unset
and ignores cases where the device doesn't expose a mac header to upper
layers, such as in ip tunnels like ipip and gre.
Traffic originating from such devices still appears garbled when capturing
on the vrf device.
Fix by observing whether the original device exposes a header to upper
layers, similar to the logic done in af_packet.
In addition, skb->mac_len needs to be adjusted after adding the Ethernet
header for the skb_push/pull() surrounding dev_queue_xmit_nit() to work
on these packets.
Fixes: 048939088220 ("vrf: add mac header for tunneled packets when sniffer is attached")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After rx/tx ring buffer size is changed, kernel panic occurs when
it acts XDP_TX or XDP_REDIRECT.
When tx/rx ring buffer size is changed(ethtool -G), sfc driver
reallocates and reinitializes rx and tx queues and their buffer
(tx_queue->buffer).
But it misses reinitializing xdp queues(efx->xdp_tx_queues).
So, while it is acting XDP_TX or XDP_REDIRECT, it uses the uninitialized
tx_queue->buffer.
A new function efx_set_xdp_channels() is separated from efx_set_channels()
to handle only xdp queues.
Splat looks like:
BUG: kernel NULL pointer dereference, address: 000000000000002a
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#4] PREEMPT SMP NOPTI
RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc]
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 5.17.0+ #55 e8beeee8289528f11357029357cf
Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80
RSP: 0018:ffff92f121e45c60 EFLAGS: 00010297
RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc]
RAX: 0000000000000040 RBX: ffff92ea506895c0 RCX: ffffffffc0330870
RDX: 0000000000000001 RSI: 00000001139b10ce RDI: ffff92ea506895c0
RBP: ffffffffc0358a80 R08: 00000001139b110d R09: 0000000000000000
R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040
R13: 0000000000000018 R14: 00000001139b10ce R15: ffff92ea506895c0
FS: 0000000000000000(0000) GS:ffff92f121ec0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80
CR2: 000000000000002a CR3: 00000003e6810004 CR4: 00000000007706e0
RSP: 0018:ffff92f121e85c60 EFLAGS: 00010297
PKRU: 55555554
RAX: 0000000000000040 RBX: ffff92ea50689700 RCX: ffffffffc0330870
RDX: 0000000000000001 RSI: 00000001145a90ce RDI: ffff92ea50689700
RBP: ffffffffc0358a80 R08: 00000001145a910d R09: 0000000000000000
R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040
R13: 0000000000000018 R14: 00000001145a90ce R15: ffff92ea50689700
FS: 0000000000000000(0000) GS:ffff92f121e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000002a CR3: 00000003e6810005 CR4: 00000000007706e0
PKRU: 55555554
Call Trace:
<IRQ>
efx_xdp_tx_buffers+0x12b/0x3d0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]
__efx_rx_packet+0x5c3/0x930 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]
efx_rx_packet+0x28c/0x2e0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]
efx_ef10_ev_process+0x5f8/0xf40 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]
? enqueue_task_fair+0x95/0x550
efx_poll+0xc4/0x360 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]
Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull virtio updates from Michael Tsirkin:
- vdpa generic device type support
- more virtio hardening for broken devices (but on the same theme,
revert some virtio hotplug hardening patches - they were misusing
some interrupt flags and had to be reverted)
- RSS support in virtio-net
- max device MTU support in mlx5 vdpa
- akcipher support in virtio-crypto
- shared IRQ support in ifcvf vdpa
- a minor performance improvement in vhost
- enable virtio mem for ARM64
- beginnings of advance dma support
- cleanups, fixes all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (33 commits)
vdpa/mlx5: Avoid processing works if workqueue was destroyed
vhost: handle error while adding split ranges to iotlb
vdpa: support exposing the count of vqs to userspace
vdpa: change the type of nvqs to u32
vdpa: support exposing the config size to userspace
vdpa/mlx5: re-create forwarding rules after mac modified
virtio: pci: check bar values read from virtio config space
Revert "virtio_pci: harden MSI-X interrupts"
Revert "virtio-pci: harden INTX interrupts"
drivers/net/virtio_net: Added RSS hash report control.
drivers/net/virtio_net: Added RSS hash report.
drivers/net/virtio_net: Added basic RSS support.
drivers/net/virtio_net: Fixed padded vheader to use v1 with hash.
virtio: use virtio_device_ready() in virtio_device_restore()
tools/virtio: compile with -pthread
tools/virtio: fix after premapped buf support
virtio_ring: remove flags check for unmap packed indirect desc
virtio_ring: remove flags check for unmap split indirect desc
virtio_ring: rename vring_unmap_state_packed() to vring_unmap_extra_packed()
net/mlx5: Add support for configuring max device MTU
...
|
|
vxlan_vnifilter_dump_dev() assumes it is called only
for vxlan devices. Make sure it is the case.
BUG: KASAN: slab-out-of-bounds in vxlan_vnifilter_dump_dev+0x9a0/0xb40 drivers/net/vxlan/vxlan_vnifilter.c:349
Read of size 4 at addr ffff888060d1ce70 by task syz-executor.3/17662
CPU: 0 PID: 17662 Comm: syz-executor.3 Tainted: G W 5.17.0-syzkaller-12888-g77c9387c0c5b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0xeb/0x495 mm/kasan/report.c:313
print_report mm/kasan/report.c:429 [inline]
kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491
vxlan_vnifilter_dump_dev+0x9a0/0xb40 drivers/net/vxlan/vxlan_vnifilter.c:349
vxlan_vnifilter_dump+0x3ff/0x650 drivers/net/vxlan/vxlan_vnifilter.c:428
netlink_dump+0x4b5/0xb70 net/netlink/af_netlink.c:2270
__netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2375
netlink_dump_start include/linux/netlink.h:245 [inline]
rtnetlink_rcv_msg+0x70c/0xb80 net/core/rtnetlink.c:5953
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:725
____sys_sendmsg+0x6e2/0x800 net/socket.c:2413
___sys_sendmsg+0xf3/0x170 net/socket.c:2467
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f87b8e89049
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Roopa Prabhu <roopa@nvidia.com>
Link: https://lore.kernel.org/r/20220330194643.2706132-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-03-31
The first patch is by Oliver Hartkopp and fixes MSG_PEEK feature in
the CAN ISOTP protocol (broken in net-next for v5.18 only).
Tom Rix's patch for the mcp251xfd driver fixes the propagation of an
error value in case of an error.
A patch by me for the m_can driver fixes a use-after-free in the xmit
handler for m_can IP cores v3.0.x.
Hangyu Hua contributes 3 patches fixing the same double free in the
error path of the xmit handler in the ems_usb, usb_8dev and mcba_usb
USB CAN driver.
Pavel Skripkin contributes a patch for the mcba_usb driver to properly
check the endpoint type.
The last patch is by me and fixes a mem leak in the gs_usb, which was
introduced in net-next for v5.18.
* tag 'linux-can-fixes-for-5.18-20220331' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: gs_usb: gs_make_candev(): fix memory leak for devices with extended bit timing configuration
can: mcba_usb: properly check endpoint type
can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error path
can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path
can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path
can: m_can: m_can_tx_handler(): fix use after free of skb
can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix return of error value
can: isotp: restore accidentally removed MSG_PEEK feature
====================
Link: https://lore.kernel.org/r/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When user delete vlan 0, as driver will not delete vlan 0 for hardware in
function hclge_set_vlan_filter_hw(), so vlan 0 in software vlan talbe should
not be deleted.
Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the debugfs mechanism is that all functions share a
global variable to save the pointer for obtaining data. When
different functions concurrently access the same file node,
repeated release exceptions occur. Therefore, the granularity
of the pointer for storing the obtained data is adjusted to be
private for each function.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
timing configuration
Some CAN-FD capable devices offer extended bit timing information for
the data bit timing. The information must be read with an USB control
message. The memory for this message is allocated but not free()ed (in
the non error case). This patch adds the missing free.
Fixes: 6679f4c5e5a6 ("can: gs_usb: add extended bt_const feature")
Link: https://lore.kernel.org/all/20220329193450.659726-1-mkl@pengutronix.de
Reported-by: syzbot+4d0ae90a195b269f102d@syzkaller.appspotmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. We should check that in endpoint is actually present to
prevent this warning.
Found pipes are now saved to struct mcba_priv and code uses them
directly instead of making pipes in place.
Fail log:
| usb 5-1: BOGUS urb xfer, pipe 3 != type 1
| WARNING: CPU: 1 PID: 49 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
| Modules linked in:
| CPU: 1 PID: 49 Comm: kworker/1:2 Not tainted 5.17.0-rc6-syzkaller-00184-g38f80f42147f #0
| Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
| Workqueue: usb_hub_wq hub_event
| RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
| ...
| Call Trace:
| <TASK>
| mcba_usb_start drivers/net/can/usb/mcba_usb.c:662 [inline]
| mcba_usb_probe+0x8a3/0xc50 drivers/net/can/usb/mcba_usb.c:858
| usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396
| call_driver_probe drivers/base/dd.c:517 [inline]
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/all/20220313100903.10868-1-paskripkin@gmail.com
Reported-and-tested-by: syzbot+3bc1dce0cc0052d60fde@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/all/20220311080208.45047-1-hbh25y@gmail.com
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.
Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/all/20220311080614.45229-1-hbh25y@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
beacause can_put_echo_skb() deletes the original skb and
can_free_echo_skb() deletes the cloned skb.
Link: https://lore.kernel.org/all/20220228083639.38183-1-hbh25y@gmail.com
Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Cc: stable@vger.kernel.org
Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
can_put_echo_skb() will clone skb then free the skb. Move the
can_put_echo_skb() for the m_can version 3.0.x directly before the
start of the xmit in hardware, similar to the 3.1.x branch.
Fixes: 80646733f11c ("can: m_can: update to support CAN FD features")
Link: https://lore.kernel.org/all/20220317081305.739554-1-mkl@pengutronix.de
Cc: stable@vger.kernel.org
Reported-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Clang static analysis reports this issue:
| mcp251xfd-core.c:1813:7: warning: The left operand
| of '&' is a garbage value
| FIELD_GET(MCP251XFD_REG_DEVID_ID_MASK, dev_id),
| ^ ~~~~~~
dev_id is set in a successful call to mcp251xfd_register_get_dev_id().
Though the status of calls made by mcp251xfd_register_get_dev_id() are
checked and handled, their status' are not returned. So return err.
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Link: https://lore.kernel.org/all/20220319153128.2164120-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
