summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2014-06-08i40evf: Fix function headerCatherine Sullivan
Fix function header comment to have the correct function name. Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e: add checks for AQ error status bitsShannon Nelson
Check for error status bits on the AdminQ event queue and announce them if seen. If the Firmware sets these bits, it will trigger an AdminQ interrupt to get the driver's attention to process the ARQ, which will likely be enough to clear the actual issue. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Change-ID: I009e0ebc8be764e40e193b29aed2863f43eb5cb0 Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-06-06 Please accept this batch of fixes intended for the 3.16 stream. For the bluetooth bits, Gustavo says: "Here some more patches for 3.16. We know that Linus already opened the merge window, but this is fix only pull request, and most of the patches here are also tagged for stable." Along with that, Andrea Merello provides a fix for the broken scanning in the venerable at76c50x driver... ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-08i40e/i40evf: Bump build versionCatherine Sullivan
Bump i40e to 0.4.5 and i40evf to 0.9.29. Change-ID: I9faca5544446518c5425612e733499cf16ef20a1 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: remove deprecated device IDsJesse Brandeburg
Remove two device IDs 1582 and 1573, because they will not be shipped. Change-ID: Ica2e550b5b21a69e3f353eba2fe5e1c532a548c4 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: fix poll weightJesse Brandeburg
Fix a coding error where during the registration for NAPI the driver requested 256 budget. The max recommended value for this is NAPI_POLL_WEIGHT or 64. Change-ID: I03ea1e2934a84ff1b5d572988b18315d6d91c5c6 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: fix TSO accountingJesse Brandeburg
The TSO logic in the transmit path had some assumptions that have been broken now that the kernel can send as much as 32kB in a single skb->frag[.] entry, even on a system with 4kB pages. This fixes the assumptions and allows the kernel to operate as efficiently as possible with both SENDFILE and SEND. In addition, the hardware limit of data contained in a descriptor is changed to the next power of two below where it currently is in order to align to a power of two value, preventing a single byte of data in a descriptor. Change-ID: I6af1f0b87c1458e10644dbd47541591075a52651 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: remove chatty reset messagesMitch Williams
Both the PF side and the VF side of the VF reset process are too noisy. We already warn the user that a reset is happening, and that is sufficient. Because some of these message are inside if statements, we have to rejigger the brackets at the same time to keep our coding style consistent. Change-ID: Id175562fb0ec7c396d9de156b4890e136f52d5f4 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e: not all VSIs have ringsMitch Williams
Once more, with feeling: not all VSIs have rings. To assume so is to invite null pointers to your party. Change-ID: I576858824468d9712d119fa1015a1f28c27712c4 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e: clear pxe after adminq is rebuiltShannon Nelson
Be sure to clear PXE mode bit on each reset after AdminQ has been rebuilt. Change-ID: I992d8c79594f8ca0660c50844ace675ecb9c9bf2 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e: Fix incorrect feature configuration statusAkeem G Abodunrin
This patch fixes an issue where FD SB/ATR and NTUPLE configurations status are reported erroneously. Without this patch, driver reports FDir without further information. Change-ID: I5bdd2871b7f2db1e5f5e76c741ae6a0dc603b453 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40evf: use correct format for printing MAC addressesMitch Williams
The correct format is %pM, not %pMAC. Change-ID: Idb335723a966fe56db3a72b9c07c08ca66f9db3c Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40evf: clean up log message formattingMitch Williams
Clean up inconsistent log messages, mostly related to punctuation. Based on the dogma that "kernel messages are not sentences", remove all trailing periods. Reword a few of the messages to make them less sentence-like. Change-ID: Ibd849aa7623a77549b0709988c66ab05d1311472 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40evf: remove bogus commentMitch Williams
This comment is just plain false. VF drivers require MSI-X or they won't get interrupts at all. Change-ID: Iaea5e30b6926948aa834a3c506d9a9223d9e3e29 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40evf: remove unnecessary log messagesMitch Williams
We don't need to print log messages when we encounter an out-of-memory condition, as the allocator will do this for us. Also, remove a Tx hang message that duplicates the one emitted by the netdev layer, and a duplicate message in the watchdog. Change-ID: If2056e6135fe248f66ea939778f9895660f4d189 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: Clean up a few thingsAkeem G Abodunrin
1. There is no ixgbe_watchdog_task function in the driver, so change the comment to the correct function name, i40e_watchdog_subtask. 2. Remove num_msix_entries from interrupt set_up routine because it is never used. 3. Remove some TBD comments that are not needed. Change-ID: I37697a04007074b797f85fd83d626672e4df1ad1 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: Fix code to accommodate i40e_register.h changesAnjali Singhai Jain
Remove use of registers no longer supported. Change-ID: I9d27399091cea78a926489d94f958edd762f5a20 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: fix rx descriptor statusJesse Brandeburg
As reported by Eric Dumazet, the driver is not masking the right bits in the receive descriptor before it starts checking them. This patch extends the mask to allow for the right bits to be checked, and fixes the issue permanently via a define. CC: Eric Dumazet <eric.dumazet@gmail.com> Change-ID: I3274f7619057a950f468143e6d7e11b129f54655 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06net: use ethtool_cmd_speed_set helper to set ethtool speed valueJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-06net: use SPEED_UNKNOWN and DUPLEX_UNKNOWN when appropriateJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-06amd-xgbe: Remove unnecessary includeTom Lendacky
The include of asm/cputype.h breaks the powerpc build. This include was accidentally left in from driver debugging and can be removed. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>, Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-06-06i40e/i40evf: Bump build versionCatherine Sullivan
Bump i40e to 0.4.3 and i40evf to 0.9.27. Change-ID: I4141e9f8615bdcfa3b1b5ecbc2ac62603a03b7ad Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: remove irqs only when they are set upShannon Nelson
Use an extra state variable to keep track of when the IRQs are fully set up. This keeps us from trying to unhook IRQs that already were left unhooked in a failed reset recovery, e.g. when firmware is broken. Change-ID: I073eb081e4ef8aedcbdf1ee0717c0ed64fa172f2 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: don't remove HMC that doesn't existShannon Nelson
If a reset recovery failed (e.g. firmware is broken), the HMC space won't get set up. We don't need to try to delete it if it didn't get set up. This stops some needless error messages when we already know we need to just tear things down. Change-ID: Iac600481765e20b136052b43a544e55d7870268b Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: print full link messageJesse Brandeburg
The i40e driver should print link messages like all the other Intel Ethernet drivers. Change-ID: Ia88bdb96794e17a3962fcea94db176de01f921f7 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: add xcast stats for portShannon Nelson
Add the missing unicast, multicast, and broadcast stats for the port. Change-ID: Ifc366d7b7745f70eaac9d00eeb0694eb9ec076a9 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: add vsi x-cast statsShannon Nelson
Add VSI HW stats for unicast, multicast, and broadcast for Rx and Tx. Stop printing the netdev multicast value because it doesn't include Tx and would be confusing. Change-ID: I08278b6657e7c838fd29a4a1f305f78fe1b150be Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: increase reset wait timeShannon Nelson
The wait time was originally too optimistic and the resets were failing after EMPR. This increases the loop count to wait considerably longer. This won't delay the actual wait longer than really needed, just allows us to poll more times as needed. Change-ID: If7b96f55cc25b8d06cbbe8665259d250188c53d7 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e/i40evf: add Tx pre queue disable functionMatt Jared
Add a function which indicates our intention to enable or disable a particular Tx queue. Also add a function to notify the device's Tx unit that we're about to enable or disable a Tx queue. Change-ID: I6adf3cbb5bb3e3c984d1ec969e06577c19ef296d Signed-off-by: Matt Jared <matthew.a.jared@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e/i40evf: check AQ register for valid dataKamil Krawczyk
B0 Si blocks AQ registers when in Blank Flash mode - write is dropped, read gives 0xDEADBEEF. Introduce a simple check for a correct value in one of the AQ registers to be sure that AQ was configured correctly. Without this check we get into an endless loop while trying to send GetVersion AQ cmd. Change-ID: I00102b8c5fa6c16d14289be677aafadf87f10f0d Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40evf: make messages less direMitch Williams
Depending on the timing of what the PF driver is doing, it make take a few tries before the VF driver is able to communicate with the PF driver on init or reset recovery. In order to prevent confusion, make the most common messages less scary by lowering them to a less terrifying log level and indicate that the driver will retry. Change-ID: I1ec22aa59a68f4469aabe14775a1bfc1ab4b7f2f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: print message for pre-production hardwareJesse Brandeburg
The driver and hardware are not expected to work correctly with revision_id 0 hardware. Don't prevent the user from using it, but be sure to print a warning. Change-ID: I3712d34752bfad458078a5f35dfd0aa0ae9fd20e Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: add VEB stats to ethtoolShannon Nelson
Print the VEB statistics in the ethtool stats output. Change-ID: Ic93d4c3922345c43e4cfd7f7e7a906844dd2f49f Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: set lan_veb indexShannon Nelson
When the VEB is created for the basic LAN device and its VSIs, we need to set the tracking lan_veb index for later use. Change-ID: I66bb74993bbda3621ca557437cb4b3517f9b315b Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/xen-netback/netback.c net/core/filter.c A filter bug fix overlapped some cleanups and a conversion over to some new insn generation macros. A xen-netback bug fix overlapped the addition of multi-queue support. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05net: systemport: start with carrier offFlorian Fainelli
The SYSTEMPORT driver uses libphy to determine the carrier state, so make sure we start with a carrier off until libphy has completed the link training process. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05net: systemport: fix comment about HW prepending 2bytesFlorian Fainelli
The comment about how the hardware prepends 2bytes to align the IP header on a 4-byte boundary was not correct, fix that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05net: systemport: correctly check for RX_STATUS_OVFLOW flagFlorian Fainelli
We were missing an and comparison with status to check whether RX_STATUS_OVFLOW is asserted or not in the per-packet status word, fix that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05net: systemport: fix transmit locking schemeFlorian Fainelli
Our transmit locking scheme did not account for the TX ring full interrupt. If a TX ring full interrupt fires while we are attempting to transmit, we will cause a deadlock to occur. Fix this by making sure that we properly disable interrupts while acquiring the spinlock. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05amd-xgbe: Configuration and build supportLendacky, Thomas
This patch provides the Kconfig and Makefile changes needed to configure and build the AMD 10GbE platform driver and the AMD 10GbE phylib driver. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05amd-xgbe: Initial AMD 10GbE phylib driverLendacky, Thomas
This patch provides the initial phylib driver in support of the AMD 10GbE device. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05amd-xgbe: Initial AMD 10GbE platform driverLendacky, Thomas
This patch provides the initial platform driver for the AMD 10GbE device. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05hplance: fix ram size in commentAmos Kong
drivers/net/ethernet/amd/hplance.h: #define HPLANCE_MEMOFF 0x8000 /* struct lance_init_block */ #define HPLANCE_NVRAMOFF 0xC008 /* etheraddress as one *nibble* per byte */ The offset of RAM start is 0x8000, the offset of RAM end is 0xC008, so the RAM size is 16392 bytes. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05mvme147: fix ram size in commentAmos Kong
The order of ram pages is 3, so the ram size is 2^3 * 4K = 32K. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05dm9000: avoid sleeping in dm9000_timeout callbackAndrew Ruder
On the DM9000B, dm9000_msleep() is called during the dm9000_timeout() routine. Since dm9000_timeout() holds the main spinlock through the entire routine, mdelay() needs to be used rather than msleep(). Furthermore, the mutex_lock()/mutex_unlock() should be avoided so as to not sleep with spinlocks held. Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05dm9000: handle initial link statusAndrew Ruder
On the DM9000A/DM9000B force the initial check of the link status. The DM9000A/B has a link status changed event and this interrupt bit isn't always set out of reset when a cable is plugged in. This results in the driver not seeing the cable attached link status until the cable is removed and plugged in again. Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05dm9000: remove redundant ISR status clearAndrew Ruder
Since dm9000_interrupt() is already reading/clearing every set bit in DM9000_ISR, this additional clear in dm9000_rx() (which is only called by dm9000_interrupt()) is unnecessary and can be removed. Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05dm9000: clean up edge-triggered irq compatibilityAndrew Ruder
DM9000 uses level-triggered interrupts. Some systems (PXA270) only support edge-triggered interrupts on GPIOs. Some changes are necessary to ensure that interrupts are not triggered while the GPIO interrupt is masked or we will miss the interrupt forever. * Make some helper functions called dm9000_mask_interrupts() and dm9000_unmask_interrupts() for readability. * dm9000_init_dm9000(): ensure that this function always leaves interrupts masked regardless of the state when it entered the function. This is primarily to support the situation in dm9000_open where the logic used to go: dm9000_open() dm9000_init_dm9000() unmask interrupts request_irq() If an interrupt occurred between unmasking the interrupt and requesting the irq, it would be missed forever as the edge event would never be seen by the GPIO hardware in the PXA270. This allows us to change the logic to: dm9000_open() dm9000_init_dm9000() dm9000_mask_interrupts() request_irq() dm9000_unmask_interrupts() * dm9000_timeout(), dm9000_drv_resume(): Add the missing dm9000_unmask_interrupts() now required by the change above. * dm9000_shutdown(): Use mask helper function * dm9000_interrupt(): Use mask/unmask helper functions Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05dm9000: clean up reset codeAndrew Ruder
* Change a hard-coded 0x3 to NCR_RST | NCR_MAC_LBK in dm9000_reset * Every single place where dm9000_init_dm9000 was ran, a dm9000_reset was called immediately before-hand. Bring dm9000_reset into dm9000_init_dm9000. * The following commit updated the dm9000_probe reset routine to use NCR_RST | NCR_MAC_LBK: 6741f40 DM9000B: driver initialization upgrade and a later commit added a bug-fix to always reset the chip twice: 09ee9f8 dm9000: Implement full reset of DM9000 network device Unfortunately, since the changes in 6741f40 were made by replacing the dm9000_probe dm9000_reset with the adjusted iow(), the changes in 09ee9f8 were not incorporated into the dm9000_probe reset. Furthermore, it bypassed the requisite reset-delay causing some boards to get at least one "read wrong id ..." dev_err message during dm9000_probe. Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>