summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e
AgeCommit message (Collapse)Author
2024-03-05i40e: Fix firmware version comparison functionIvan Vecera
Helper i40e_is_fw_ver_eq() compares incorrectly given firmware version as it returns true when the major version of running firmware is greater than the given major version that is wrong and results in failure during getting of DCB configuration where this helper is used. Fix the check and return true only if the running FW version is exactly equals to the given version. Reproducer: 1. Load i40e driver 2. Check dmesg output [root@host ~]# modprobe i40e [root@host ~]# dmesg | grep 'i40e.*DCB' [ 74.750642] i40e 0000:02:00.0: Query for DCB configuration failed, err -EIO aq_err I40E_AQ_RC_EINVAL [ 74.759770] i40e 0000:02:00.0: DCB init failed -5, disabled [ 74.966550] i40e 0000:02:00.1: Query for DCB configuration failed, err -EIO aq_err I40E_AQ_RC_EINVAL [ 74.975683] i40e 0000:02:00.1: DCB init failed -5, disabled Fixes: cf488e13221f ("i40e: Add other helpers to check version of running firmware and AQ API") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-04net: adopt skb_network_header_len() more broadlyEric Dumazet
(skb_transport_header(skb) - skb_network_header(skb)) can be replaced by skb_network_header_len(skb) Add a DEBUG_NET_WARN_ON_ONCE() in skb_network_header_len() to catch cases were the transport_header was not set. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04net: adopt skb_network_offset() and similar helpersEric Dumazet
This is a cleanup patch, making code a bit more concise. 1) Use skb_network_offset(skb) in place of (skb_network_header(skb) - skb->data) 2) Use -skb_network_offset(skb) in place of (skb->data - skb_network_header(skb)) 3) Use skb_transport_offset(skb) in place of (skb_transport_header(skb) - skb->data) 4) Use skb_inner_transport_offset(skb) in place of (skb_inner_transport_header(skb) - skb->data) Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01i40e: disable NAPI right after disabling irqs when handling xsk_poolMaciej Fijalkowski
Disable NAPI before shutting down queues that this particular NAPI contains so that the order of actions in i40e_queue_pair_disable() mirrors what we do in i40e_queue_pair_enable(). Fixes: 123cecd427b6 ("i40e: added queue pair disable/enable functions") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-28net: intel: i40e/igc: Remove setting Autoneg in EEE capabilitiesAndrew Lunn
Energy Efficient Ethernet should always be negotiated with the link peer. Don't include SUPPORTED_Autoneg in the results of get_eee() for supported, advertised or lp_advertised, since it is assumed. Additionally, ethtool(1) ignores the set bit, and no other driver sets this. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-16i40e: Remove VEB recursionIvan Vecera
The VEB (virtual embedded switch) as a switch element can be connected according datasheet though its uplink to: - Physical port - Port Virtualizer (not used directly by i40e driver but can be present in MFP mode where the physical port is shared between PFs) - No uplink (aka floating VEB) But VEB uplink cannot be connected to another VEB and any attempt to do so results in: "i40e 0000:02:00.0: couldn't add VEB, err -EIO aq_err I40E_AQ_RC_ENOENT" that indicates "the uplink SEID does not point to valid element". Remove this logic from the driver code this way: 1) For debugfs only allow to build floating VEB (uplink_seid == 0) or main VEB (uplink_seid == mac_seid) 2) Do not recurse in i40e_veb_link_event() as no VEB cannot have sub-VEBs 3) Ditto for i40e_veb_rebuild() + simplify the function as we know that the VEB for rebuild can be only the main LAN VEB or some of the floating VEBs 4) In i40e_rebuild() there is no need to check veb->uplink_seid as the possible ones are 0 and MAC SEID 5) In i40e_vsi_release() do not take into account VEBs whose uplink is another VEB as this is not possible 6) Remove veb_idx field from i40e_veb as a VEB cannot have sub-VEBs Tested using i40e debugfs interface: 1) Initial state [root@cnb-03 net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command" [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c [ 98.440641] i40e 0000:02:00.0: header: 3 reported 3 total [ 98.446053] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 98.452593] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 98.458856] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 2) Add floating VEB [root@cnb-03 net-next]# echo add relay > $CMD [root@cnb-03 net-next]# dmesg -c [ 122.745630] i40e 0000:02:00.0: added relay 162 [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c [ 136.650049] i40e 0000:02:00.0: header: 4 reported 4 total [ 136.655466] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 136.661994] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 136.668264] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 [ 136.674787] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 3) Add VMDQ2 VSI to this new VEB [root@cnb-03 net-next]# dmesg -c [ 168.351763] i40e 0000:02:00.0: added VSI 394 to relay 162 [ 168.374652] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c [ 195.683204] i40e 0000:02:00.0: header: 5 reported 5 total [ 195.688611] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 195.695143] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 195.701410] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 195.707935] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 195.714201] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 4) Try to delete the VEB [root@cnb-03 net-next]# echo del relay 162 > $CMD [root@cnb-03 net-next]# dmesg -c [ 239.260901] i40e 0000:02:00.0: deleting relay 162 [ 239.265621] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left 5) Do PF reset and check switch status after rebuild [root@cnb-03 net-next]# echo pfr > $CMD [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c ... [ 272.333655] i40e 0000:02:00.0: header: 5 reported 5 total [ 272.339066] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 272.345599] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 272.351862] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 272.358387] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 272.364654] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 6) Delete VSI and delete VEB [ 297.199116] i40e 0000:02:00.0: deleting VSI 394 [ 299.807580] i40e 0000:02:00.0: deleting relay 162 [ 309.767905] i40e 0000:02:00.0: header: 3 reported 3 total [ 309.773318] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 309.779845] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 309.786111] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-16i40e: Fix broken support for floating VEBsIvan Vecera
Although the i40e supports so-called floating VEB (VEB without an uplink connection to external network), this support is broken. This functionality is currently unused (except debugfs) but it will be used by subsequent series for switchdev mode slow-path. Fix this by following: 1) Handle correctly floating VEB (VEB with uplink_seid == 0) in i40e_reconstitute_veb() and look for owner VSI and create it only for non-floating VEBs and also set bridge mode only for such VEBs as the floating ones are using always VEB mode. 2) Handle correctly floating VEB in i40e_veb_release() and disallow its release when there are some VSIs. This is different from regular VEB that have owner VSI that is connected to VEB's uplink after VEB deletion by FW. 3) Fix i40e_add_veb() to handle 'vsi' that is NULL for floating VEBs. For floating VEB use 0 for downlink SEID and 'true' for 'default_port' parameters as per datasheet. 4) Fix 'add relay' command in i40e_dbg_command_write() to allow to create floating VEB by 'add relay 0 0' or 'add relay' Tested using debugfs: 1) Initial state [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 173.701286] i40e 0000:02:00.0: header: 3 reported 3 total [ 173.706701] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 173.713241] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 173.719507] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 2) Add floating VEB [root@host net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command" [root@host net-next]# echo add relay > $CMD [root@host net-next]# dmesg -c [ 245.551720] i40e 0000:02:00.0: added relay 162 [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 276.984371] i40e 0000:02:00.0: header: 4 reported 4 total [ 276.989779] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 276.996302] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 277.002569] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 [ 277.009091] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 3) Add VMDQ2 VSI to this new VEB [root@host net-next]# echo add vsi 162 > $CMD [root@host net-next]# dmesg -c [ 332.314030] i40e 0000:02:00.0: added VSI 394 to relay 162 [ 332.337486] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 387.284490] i40e 0000:02:00.0: header: 5 reported 5 total [ 387.289904] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 387.296446] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 387.302708] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 387.309234] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 387.315500] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 4) Try to delete the VEB [root@host net-next]# echo del relay 162 > $CMD [root@host net-next]# dmesg -c [ 428.749297] i40e 0000:02:00.0: deleting relay 162 [ 428.754011] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left 5) Do PF reset and check switch status after rebuild [root@host net-next]# echo pfr > $CMD [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 738.056172] i40e 0000:02:00.0: header: 5 reported 5 total [ 738.061577] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 738.068104] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 738.074367] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 738.080892] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 738.087160] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 6) Delete VSI and delete VEB [root@host net-next]# echo del vsi 394 > $CMD [root@host net-next]# echo del relay 162 > $CMD [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 1233.081126] i40e 0000:02:00.0: deleting VSI 394 [ 1239.345139] i40e 0000:02:00.0: deleting relay 162 [ 1244.886920] i40e 0000:02:00.0: header: 3 reported 3 total [ 1244.892328] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 1244.898853] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 1244.905119] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-16i40e: Add helpers to find VSI and VEB by SEID and use themIvan Vecera
Add two helpers i40e_(veb|vsi)_get_by_seid() to find corresponding VEB or VSI by their SEID value and use these helpers to replace existing open-coded loops. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-16i40e: Introduce and use macros for iterating VSIs and VEBsIvan Vecera
Introduce i40e_for_each_vsi() and i40e_for_each_veb() helper macros and use them to iterate relevant arrays. Replace pattern: for (i = 0; i < pf->num_alloc_vsi; i++) by: i40e_for_each_vsi(pf, i, vsi) and pattern: for (i = 0; i < I40E_MAX_VEB; i++) by i40e_for_each_veb(pf, i, veb) These macros also check if array item pf->vsi[i] or pf->veb[i] are not NULL and skip such items so we can remove redundant checks from loop bodies. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-16i40e: Use existing helper to find flow director VSIIvan Vecera
Use existing i40e_find_vsi_by_type() to find a VSI associated with flow director. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/dev.c 9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()") 723de3ebef03 ("net: free altname using an RCU callback") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.") drivers/net/ethernet/renesas/ravb_main.c ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path" ) c2da9408579d ("ravb: Add Rx checksum offload support for GbEth") net/mptcp/protocol.c bdd70eb68913 ("mptcp: drop the push_pending field") 28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-14Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-02-12 (i40e) This series contains updates to i40e driver only. Ivan Vecera corrects the looping value used while waiting for queues to be disabled as well as an incorrect mask being used for DCB configuration. Maciej resolves an issue related to XDP traffic; removing a double call to i40e_pf_rxq_wait() and accounting for XDP rings when stopping rings. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12i40e: take into account XDP Tx queues when stopping ringsMaciej Fijalkowski
Seth reported that on his side XDP traffic can not survive a round of down/up against i40e interface. Dmesg output was telling us that we were not able to disable the very first XDP ring. That was due to the fact that in i40e_vsi_stop_rings() in a pre-work that is done before calling i40e_vsi_wait_queues_disabled(), XDP Tx queues were not taken into the account. To fix this, let us distinguish between Rx and Tx queue boundaries and take into the account XDP queues for Tx side. Reported-by: Seth Forshee <sforshee@kernel.org> Closes: https://lore.kernel.org/netdev/ZbkE7Ep1N1Ou17sA@do-x1extreme/ Fixes: 65662a8dcdd0 ("i40e: Fix logic of disabling queues") Tested-by: Seth Forshee <sforshee@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12i40e: avoid double calling i40e_pf_rxq_wait()Maciej Fijalkowski
Currently, when interface is being brought down and i40e_vsi_stop_rings() is called, i40e_pf_rxq_wait() is called two times, which is wrong. To showcase this scenario, simplified call stack looks as follows: i40e_vsi_stop_rings() i40e_control wait rx_q() i40e_control_rx_q() i40e_pf_rxq_wait() i40e_vsi_wait_queues_disabled() i40e_pf_rxq_wait() // redundant call To fix this, let us s/i40e_control_wait_rx_q/i40e_control_rx_q within i40e_vsi_stop_rings(). Fixes: 65662a8dcdd0 ("i40e: Fix logic of disabling queues") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12i40e: Fix wrong mask used during DCB configIvan Vecera
Mask used for clearing PRTDCB_RETSTCC register in function i40e_dcb_hw_rx_ets_bw_config() is incorrect as there is used define I40E_PRTDCB_RETSTCC_ETSTC_SHIFT instead of define I40E_PRTDCB_RETSTCC_ETSTC_MASK. The PRTDCB_RETSTCC register is used to configure whether ETS or strict priority is used as TSA in Rx for particular TC. In practice it means that once the register is set to use ETS as TSA then it is not possible to switch back to strict priority without CoreR reset. Fix the value in the clearing mask. Fixes: 90bc8e003be2 ("i40e: Add hardware configuration for software based DCB") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12i40e: Fix waiting for queues of all VSIs to be disabledIvan Vecera
The function i40e_pf_wait_queues_disabled() iterates all PF's VSIs up to 'pf->hw.func_caps.num_vsis' but this is incorrect because the real number of VSIs can be up to 'pf->num_alloc_vsi' that can be higher. Fix this loop. Fixes: 69129dc39fac ("i40e: Modify Tx disable wait flow in case of DCB reconfiguration") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12i40e: Do not allow untrusted VF to remove administratively set MACIvan Vecera
Currently when PF administratively sets VF's MAC address and the VF is put down (VF tries to delete all MACs) then the MAC is removed from MAC filters and primary VF MAC is zeroed. Do not allow untrusted VF to remove primary MAC when it was set administratively by PF. Reproducer: 1) Create VF 2) Set VF interface up 3) Administratively set the VF's MAC 4) Put VF interface down [root@host ~]# echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs [root@host ~]# ip link set enp2s0f0v0 up [root@host ~]# ip link set enp2s0f0 vf 0 mac fe:6c:b5:da:c7:7d [root@host ~]# ip link show enp2s0f0 23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff vf 0 link/ether fe:6c:b5:da:c7:7d brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off [root@host ~]# ip link set enp2s0f0v0 down [root@host ~]# ip link show enp2s0f0 23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff vf 0 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off Fixes: 700bbf6c1f9e ("i40e: allow VF to remove any MAC filter") Fixes: ceb29474bbbc ("i40e: Add support for VF to specify its primary MAC address") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240208180335.1844996-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/stmicro/stmmac/common.h 38cc3c6dcc09 ("net: stmmac: protect updates of 64-bit statistics counters") fd5a6a71313e ("net: stmmac: est: Per Tx-queue error count for HLBF") c5c3e1bfc9e0 ("net: stmmac: Offload queueMaxSDU from tc-taprio") drivers/net/wireless/microchip/wilc1000/netdev.c c9013880284d ("wifi: fill in MODULE_DESCRIPTION()s for wilc1000") 328efda22af8 ("wifi: wilc1000: do not realloc workqueue everytime an interface is added") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 1279f9d9dec2 ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-07net: intel: fix old compiler regressionsJesse Brandeburg
The kernel build regressions/improvements email contained a couple of issues with old compilers (in fact all the reports were on different architectures, but all gcc 5.5) and the FIELD_PREP() and FIELD_GET() conversions. They're all because an integer #define that should have been declared as unsigned, was shifted to the point that it could set the sign bit. The fix just involves making sure the defines use the "U" identifier on the constants to make sure they're unsigned. Should make the checkers happier. Confirmed with objdump before/after that there is no change to the binaries. Issues were reported as follows: ./drivers/net/ethernet/intel/ice/ice_base.c:238:7: note: in expansion of macro 'FIELD_GET' (FIELD_GET(GLINT_CTL_ITR_GRAN_25_M, regval) == ICE_ITR_GRAN_US)) ^ ./include/linux/compiler_types.h:435:38: error: call to '__compiletime_assert_1093' declared with attribute error: FIELD_GET: mask is not constant drivers/net/ethernet/intel/ice/ice_nvm.c:709:16: note: in expansion of macro ‘FIELD_GET’ orom->major = FIELD_GET(ICE_OROM_VER_MASK, combo_ver); ^ ./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_796’ declared with attribute error: FIELD_GET: mask is not constant drivers/net/ethernet/intel/ice/ice_common.c:945:18: note: in expansion of macro ‘FIELD_GET’ u8 max_agg_bw = FIELD_GET(GL_PWR_MODE_CTL_CAR_MAX_BW_M, ^ ./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_420’ declared with attribute error: FIELD_GET: mask is not constant drivers/net/ethernet/intel/i40e/i40e_dcb.c:458:8: note: in expansion of macro ‘FIELD_GET’ oui = FIELD_GET(I40E_LLDP_TLV_OUI_MASK, ouisubtype); ^ Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Closes: https://lore.kernel.org/lkml/d03e90ca-8485-4d1b-5ec1-c3398e0e8da@linux-m68k.org/ #i40e #ice Fixes: 62589808d73b ("i40e: field get conversion") Fixes: 5a259f8e0baf ("ice: field get conversion") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20240206022906.2194214-1-jesse.brandeburg@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31ethtool: add suffix _u32 to legacy bitmap members of struct ethtool_keeeHeiner Kallweit
This is in preparation of using the existing names for linkmode bitmaps. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel ↵Heiner Kallweit
side In order to pass EEE link modes beyond bit 32 to userspace we have to complement the 32 bit bitmaps in struct ethtool_eee with linkmode bitmaps. Therefore, similar to ethtool_link_settings and ethtool_link_ksettings, add a struct ethtool_keee. In a first step it's an identical copy of ethtool_eee. This patch simply does a s/ethtool_eee/ethtool_keee/g for all users. No functional change intended. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-24i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queueMaciej Fijalkowski
Now that i40e driver correctly sets up frag_size in xdp_rxq_info, let us make it work for ZC multi-buffer as well. i40e_ring::rx_buf_len for ZC is being set via xsk_pool_get_rx_frame_size() and this needs to be propagated up to xdp_rxq_info. Fixes: 1c9ba9c14658 ("i40e: xsk: add RX multi-buffer support") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-12-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24i40e: set xdp_rxq_info::frag_sizeMaciej Fijalkowski
i40e support XDP multi-buffer so it is supposed to use __xdp_rxq_info_reg() instead of xdp_rxq_info_reg() and set the frag_size. It can not be simply converted at existing callsite because rx_buf_len could be un-initialized, so let us register xdp_rxq_info within i40e_configure_rx_ring(), which happen to be called with already initialized rx_buf_len value. Commit 5180ff1364bc ("i40e: use int for i40e_status") converted 'err' to int, so two variables to deal with return codes are not needed within i40e_configure_rx_ring(). Remove 'ret' and use 'err' to handle status from xdp_rxq_info registration. Fixes: e213ced19bef ("i40e: add support for XDP multi-buffer Rx") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-11-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24intel: xsk: initialize skb_frag_t::bv_offset in ZC driversMaciej Fijalkowski
Ice and i40e ZC drivers currently set offset of a frag within skb_shared_info to 0, which is incorrect. xdp_buffs that come from xsk_buff_pool always have 256 bytes of a headroom, so they need to be taken into account to retrieve xdp_buff::data via skb_frag_address(). Otherwise, bpf_xdp_frags_increase_tail() would be starting its job from xdp_buff::data_hard_start which would result in overwriting existing payload. Fixes: 1c9ba9c14658 ("i40e: xsk: add RX multi-buffer support") Fixes: 1bbc04de607b ("ice: xsk: add RX multi-buffer support") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-8-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24i40e: handle multi-buffer packets that are shrunk by xdp progTirthendu Sarkar
XDP programs can shrink packets by calling the bpf_xdp_adjust_tail() helper function. For multi-buffer packets this may lead to reduction of frag count stored in skb_shared_info area of the xdp_buff struct. This results in issues with the current handling of XDP_PASS and XDP_DROP cases. For XDP_PASS, currently skb is being built using frag count of xdp_buffer before it was processed by XDP prog and thus will result in an inconsistent skb when frag count gets reduced by XDP prog. To fix this, get correct frag count while building the skb instead of using pre-obtained frag count. For XDP_DROP, current page recycling logic will not reuse the page but instead will adjust the pagecnt_bias so that the page can be freed. This again results in inconsistent behavior as the page refcnt has already been changed by the helper while freeing the frag(s) as part of shrinking the packet. To fix this, only adjust pagecnt_bias for buffers that are stillpart of the packet post-xdp prog run. Fixes: e213ced19bef ("i40e: add support for XDP multi-buffer Rx") Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-6-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24xsk: make xsk_buff_pool responsible for clearing xdp_buff::flagsMaciej Fijalkowski
XDP multi-buffer support introduced XDP_FLAGS_HAS_FRAGS flag that is used by drivers to notify data path whether xdp_buff contains fragments or not. Data path looks up mentioned flag on first buffer that occupies the linear part of xdp_buff, so drivers only modify it there. This is sufficient for SKB and XDP_DRV modes as usually xdp_buff is allocated on stack or it resides within struct representing driver's queue and fragments are carried via skb_frag_t structs. IOW, we are dealing with only one xdp_buff. ZC mode though relies on list of xdp_buff structs that is carried via xsk_buff_pool::xskb_list, so ZC data path has to make sure that fragments do *not* have XDP_FLAGS_HAS_FRAGS set. Otherwise, xsk_buff_free() could misbehave if it would be executed against xdp_buff that carries a frag with XDP_FLAGS_HAS_FRAGS flag set. Such scenario can take place when within supplied XDP program bpf_xdp_adjust_tail() is used with negative offset that would in turn release the tail fragment from multi-buffer frame. Calling xsk_buff_free() on tail fragment with XDP_FLAGS_HAS_FRAGS would result in releasing all the nodes from xskb_list that were produced by driver before XDP program execution, which is not what is intended - only tail fragment should be deleted from xskb_list and then it should be put onto xsk_buff_pool::free_list. Such multi-buffer frame will never make it up to user space, so from AF_XDP application POV there would be no traffic running, however due to free_list getting constantly new nodes, driver will be able to feed HW Rx queue with recycled buffers. Bottom line is that instead of traffic being redirected to user space, it would be continuously dropped. To fix this, let us clear the mentioned flag on xsk_buff_pool side during xdp_buff initialization, which is what should have been done right from the start of XSK multi-buffer support. Fixes: 1bbc04de607b ("ice: xsk: add RX multi-buffer support") Fixes: 1c9ba9c14658 ("i40e: xsk: add RX multi-buffer support") Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-3-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-18i40e: Include types.h to some headersTony Nguyen
Commit 56df345917c0 ("i40e: Remove circular header dependencies and fix headers") redistributed a number of includes from one large header file to the locations they were needed. In some environments, types.h is not included and causing compile issues. The driver should not rely on implicit inclusion from other locations; explicitly include it to these files. Snippet of issue. Entire log can be seen through the Closes: link. In file included from drivers/net/ethernet/intel/i40e/i40e_diag.h:7, from drivers/net/ethernet/intel/i40e/i40e_diag.c:4: drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h:33:9: error: unknown type name '__le16' 33 | __le16 flags; | ^~~~~~ drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h:34:9: error: unknown type name '__le16' 34 | __le16 opcode; | ^~~~~~ ... drivers/net/ethernet/intel/i40e/i40e_diag.h:22:9: error: unknown type name 'u32' 22 | u32 elements; /* number of elements if array */ | ^~~ drivers/net/ethernet/intel/i40e/i40e_diag.h:23:9: error: unknown type name 'u32' 23 | u32 stride; /* bytes between each element */ Reported-by: Martin Zaharinov <micron10@gmail.com> Closes: https://lore.kernel.org/netdev/21BBD62A-F874-4E42-B347-93087EEA8126@gmail.com/ Fixes: 56df345917c0 ("i40e: Remove circular header dependencies and fix headers") Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240117172534.3555162-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()") 0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL") https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-04Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-01-03 (i40e, ice, igc) This series contains updates to i40e, ice, and igc drivers. Ke Xiao fixes use after free for unicast filters on i40e. Andrii restores VF MSI-X flag after PCI reset on i40e. Paul corrects admin queue link status structure to fulfill firmware expectations for ice. Rodrigo Cataldo corrects value used for hicredit calculations on igc. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igc: Fix hicredit calculation ice: fix Get link status data length i40e: Restore VF MSI-X state during PCI reset i40e: fix use-after-free in i40e_aqc_add_filters() ==================== Link: https://lore.kernel.org/r/20240103193254.822968-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-03i40e: Restore VF MSI-X state during PCI resetAndrii Staikov
During a PCI FLR the MSI-X Enable flag in the VF PCI MSI-X capability register will be cleared. This can lead to issues when a VF is assigned to a VM because in these cases the VF driver receives no indication of the PF PCI error/reset and additionally it is incapable of restoring the cleared flag in the hypervisor configuration space without fully reinitializing the driver interrupt functionality. Since the VF driver is unable to easily resolve this condition on its own, restore the VF MSI-X flag during the PF PCI reset handling. Fixes: 19b7960b2da1 ("i40e: implement split PCI error reset handler") Co-developed-by: Karen Ostrowska <karen.ostrowska@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Co-developed-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-03i40e: fix use-after-free in i40e_aqc_add_filters()Ke Xiao
Commit 3116f59c12bd ("i40e: fix use-after-free in i40e_sync_filters_subtask()") avoided use-after-free issues, by increasing refcount during update the VSI filter list to the HW. However, it missed the unicast situation. When deleting an unicast FDB entry, the i40e driver will release the mac_filter, and i40e_service_task will concurrently request firmware to add the mac_filter, which will lead to the following use-after-free issue. Fix again for both netdev->uc and netdev->mc. BUG: KASAN: use-after-free in i40e_aqc_add_filters+0x55c/0x5b0 [i40e] Read of size 2 at addr ffff888eb3452d60 by task kworker/8:7/6379 CPU: 8 PID: 6379 Comm: kworker/8:7 Kdump: loaded Tainted: G Workqueue: i40e i40e_service_task [i40e] Call Trace: dump_stack+0x71/0xab print_address_description+0x6b/0x290 kasan_report+0x14a/0x2b0 i40e_aqc_add_filters+0x55c/0x5b0 [i40e] i40e_sync_vsi_filters+0x1676/0x39c0 [i40e] i40e_service_task+0x1397/0x2bb0 [i40e] process_one_work+0x56a/0x11f0 worker_thread+0x8f/0xf40 kthread+0x2a0/0x390 ret_from_fork+0x1f/0x40 Allocated by task 21948: kasan_kmalloc+0xa6/0xd0 kmem_cache_alloc_trace+0xdb/0x1c0 i40e_add_filter+0x11e/0x520 [i40e] i40e_addr_sync+0x37/0x60 [i40e] __hw_addr_sync_dev+0x1f5/0x2f0 i40e_set_rx_mode+0x61/0x1e0 [i40e] dev_uc_add_excl+0x137/0x190 i40e_ndo_fdb_add+0x161/0x260 [i40e] rtnl_fdb_add+0x567/0x950 rtnetlink_rcv_msg+0x5db/0x880 netlink_rcv_skb+0x254/0x380 netlink_unicast+0x454/0x610 netlink_sendmsg+0x747/0xb00 sock_sendmsg+0xe2/0x120 __sys_sendto+0x1ae/0x290 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0xa0/0x370 entry_SYSCALL_64_after_hwframe+0x65/0xca Freed by task 21948: __kasan_slab_free+0x137/0x190 kfree+0x8b/0x1b0 __i40e_del_filter+0x116/0x1e0 [i40e] i40e_del_mac_filter+0x16c/0x300 [i40e] i40e_addr_unsync+0x134/0x1b0 [i40e] __hw_addr_sync_dev+0xff/0x2f0 i40e_set_rx_mode+0x61/0x1e0 [i40e] dev_uc_del+0x77/0x90 rtnl_fdb_del+0x6a5/0x860 rtnetlink_rcv_msg+0x5db/0x880 netlink_rcv_skb+0x254/0x380 netlink_unicast+0x454/0x610 netlink_sendmsg+0x747/0xb00 sock_sendmsg+0xe2/0x120 __sys_sendto+0x1ae/0x290 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0xa0/0x370 entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 3116f59c12bd ("i40e: fix use-after-free in i40e_sync_filters_subtask()") Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Ke Xiao <xiaoke@sangfor.com.cn> Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Cc: Di Zhu <zhudi2@huawei.com> Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02i40e: Avoid unnecessary use of comma operatorSimon Horman
Although it does not seem to have any untoward side-effects, the use of ';' to separate to assignments seems more appropriate than ','. Flagged by clang-17 -Wcomma No functional change intended. Compile tested only. Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02i40e: Fix VF disable behavior to block all trafficAndrii Staikov
Currently, if a VF is disabled using the 'ip link set dev $ETHX vf $VF_NUM state disable' command, the VF is still able to receive traffic. Fix the behavior of the 'ip link set dev $ETHX vf $VF_NUM state disable' to completely shutdown the VF's queues making it entirely disabled and not able to receive or send any traffic. Modify the behavior of the 'ip link set $ETHX vf $VF_NUM state enable' command to make a VF do reinitialization bringing the queues back up. Co-developed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27i40e: Fix filter input checks to prevent config with invalid valuesSudheer Mogilappagari
Prevent VF from configuring filters with unsupported actions or use REDIRECT action with invalid tc number. Current checks could cause out of bounds access on PF side. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-22Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== intel: use bitfield operations Jesse Brandeburg says: After repeatedly getting review comments on new patches, and sporadic patches to fix parts of our drivers, we should just convert the Intel code to use FIELD_PREP() and FIELD_GET(). It's then "common" in the code and hopefully future change-sets will see the context and do-the-right-thing. This conversion was done with a coccinelle script which is mentioned in the commit messages. Generally there were only a couple conversions that were "undone" after the automatic changes because they tried to convert a non-contiguous mask. Patch 1 is required at the beginning of this series to fix a "forever" issue in the e1000e driver that fails the compilation test after conversion because the shift / mask was out of range. The second patch just adds all the new #includes in one go. The patch titled: "ice: fix pre-shifted bit usage" is needed to allow the use of the FIELD_* macros and fix up the unexpected "shifts included" defines found while creating this series. The rest are the conversion to use FIELD_PREP()/FIELD_GET(), and the occasional leXX_{get,set,encode}_bits() call, as suggested by Alex. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR. Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c 23c93c3b6275 ("bnxt_en: do not map packet buffers twice") 6d1add95536b ("bnxt_en: Modify TX ring indexing logic.") tools/testing/selftests/net/Makefile 2258b666482d ("selftests: add vlan hw filter tests") a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-18i40e: field get conversionJesse Brandeburg
Refactor the i40e driver to use FIELD_GET() for mask and shift reads, which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. While making one of the conversions, an if() check was inverted to return early and avoid un-necessary indentation of the remainder of the function. In some other cases a stack variable was moved inside the block where it was used while doing cleanups/review. A couple places were changed to use le16_get_bits() instead of FIELD_GET with a le16_to_cpu combination. @get@ constant shift,mask; metavariable type T; expression a; @@ -(((T)(a) & mask) >> shift) +FIELD_GET(mask, a) and applied via: spatch --sp-file field_prep.cocci --in-place --dir \ drivers/net/ethernet/intel/ Cc: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-18i40e: field prep conversionJesse Brandeburg
Refactor i40e driver to use FIELD_PREP(), which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. Refactor one function with multiple if's to return quickly to make lines fit in 80 columns. @prep2@ constant shift,mask; type T; expression a; @@ -(((T)(a) << shift) & mask) +FIELD_PREP(mask, a) @prep@ constant shift,mask; type T; expression a; @@ -((T)((a) << shift) & mask) +FIELD_PREP(mask, a) Cc: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-18intel: add bit macro includes where neededJesse Brandeburg
This series is introducing the use of FIELD_GET and FIELD_PREP which requires bitfield.h to be included. Fix all the includes in this one change, and rearrange includes into alphabetical order to ease readability and future maintenance. virtchnl.h and it's usage was modified to have it's own includes as it should. This required including bits.h for virtchnl.h. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-14i40e: remove fake support of rx-frames-irqJason Xing
Since we never support this feature for I40E driver, we don't have to display the value when using 'ethtool -c eth0'. Before this patch applied, the rx-frames-irq is 256 which is consistent with tx-frames-irq. Apparently it could mislead users. Signed-off-by: Jason Xing <kernelxing@tencent.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231213184406.1306602-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool opsAhmed Zaki
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13i40e: Fix ST code value for Clause 45Ivan Vecera
ST code value for clause 45 that has been changed by commit 8196b5fd6c73 ("i40e: Refactor I40E_MDIO_CLAUSE* macros") is currently wrong. The mentioned commit refactored ..MDIO_CLAUSE??_STCODE_MASK so their value is the same for both clauses. The value is correct for clause 22 but not for clause 45. Fix the issue by adding a parameter to I40E_GLGEN_MSCA_STCODE_MASK macro that specifies required value. Fixes: 8196b5fd6c73 ("i40e: Refactor I40E_MDIO_CLAUSE* macros") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-08net: Convert some ethtool_sprintf() to ethtool_puts()justinstitt@google.com
This patch converts some basic cases of ethtool_sprintf() to ethtool_puts(). The conversions are used in cases where ethtool_sprintf() was being used with just two arguments: | ethtool_sprintf(&data, buffer[i].name); or when it's used with format string: "%s" | ethtool_sprintf(&data, "%s", buffer[i].name); which both now become: | ethtool_puts(&data, buffer[i].name); Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/stmicro/stmmac/dwmac5.c drivers/net/ethernet/stmicro/stmmac/dwmac5.h drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c drivers/net/ethernet/stmicro/stmmac/hwif.h 37e4b8df27bc ("net: stmmac: fix FPE events losing") c3f3b97238f6 ("net: stmmac: Refactor EST implementation") https://lore.kernel.org/all/20231206110306.01e91114@canb.auug.org.au/ Adjacent changes: net/ipv4/tcp_ao.c 9396c4ee93f9 ("net/tcp: Don't store TCP-AO maclen on reqsk") 7b0f570f879a ("tcp: Move TCP-AO bits from cookie_v[46]_check() to tcp_ao_syncookie().") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05i40e: Fix unexpected MFS warning messageIvan Vecera
Commit 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") added a warning message that reports unexpected size of port's MFS (max frame size) value. This message use for the port number local variable 'i' that is wrong. In i40e_probe() this 'i' variable is used only to iterate VSIs to find FDIR VSI: <code> ... /* if FDIR VSI was set up, start it now */ for (i = 0; i < pf->num_alloc_vsi; i++) { if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) { i40e_vsi_open(pf->vsi[i]); break; } } ... </code> So the warning message use for the port number index of FDIR VSI if this exists or pf->num_alloc_vsi if not. Fix the message by using 'pf->hw.port' for the port number. Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-27i40e: Remove queue tracking fields from i40e_adminq_ringIvan Vecera
Fields 'head', 'tail', 'len', 'bah' and 'bal' in i40e_adminq_ring are used to store register offsets. These offsets are initialized and remains constant so there is no need to store them in the i40e_adminq_ring structure. Remove these fields from i40e_adminq_ring and use register offset constants instead. Remove i40e_adminq_init_regs() that originally stores these constants into these fields. Finally improve i40e_check_asq_alive() that assumes that non-zero value of hw->aq.asq.len indicates fully initialized AdminQ send queue. Replace it by check for non-zero value of field hw->aq.asq.count that is non-zero when the sending queue is initialized and is zeroed during shutdown of the queue. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-27i40e: Remove AQ register definitions for VF typesIvan Vecera
The i40e driver does not handle its VF device types so there is no need to keep AdminQ register definitions for such device types. Remove them. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-27i40e: Delete unused and useless i40e_pf fieldsIvan Vecera
Removed fields: .fc_autoneg_status Since commit c56999f94876 ("i40e/i40evf: Add set_fc and init of FC settings") write-only and otherwise unused .eeprom_version Write-only and otherwise unused .atr_sample_rate Has only one possible value (I40E_DEFAULT_ATR_SAMPLE_RATE). Remove it and replace its occurrences by I40E_DEFAULT_ATR_SAMPLE_RATE .adminq_work_limit Has only one possible value (I40E_AQ_WORK_LIMIT). Remove it and replace its occurrences by I40E_AQ_WORK_LIMIT .tx_sluggish_count Unused, never written .pf_seid Used to store VSI downlink seid and it is referenced only once in the same codepath. There is no need to save it into i40e_pf. Remove it and use downlink_seid directly in the mentioned log message. .instance Write only. Remove it as well as ugly static local variable 'pfs_found' in i40e_probe. .int_policy .switch_kobj .ptp_pps_work .ptp_extts1_work .ptp_pps_start .pps_delay .ptp_pin .override_q_count All these unused at all Prior the patch: pahole -Ci40e_pf drivers/net/ethernet/intel/i40e/i40e.ko | tail -5 /* size: 5368, cachelines: 84, members: 127 */ /* sum members: 5297, holes: 20, sum holes: 71 */ /* paddings: 6, sum paddings: 19 */ /* last cacheline: 56 bytes */ }; After the patch: pahole -Ci40e_pf drivers/net/ethernet/intel/i40e/i40e.ko | tail -5 /* size: 4976, cachelines: 78, members: 112 */ /* sum members: 4905, holes: 17, sum holes: 71 */ /* paddings: 6, sum paddings: 19 */ /* last cacheline: 48 bytes */ }; Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/intel/ice/ice_main.c c9663f79cd82 ("ice: adjust switchdev rebuild path") 7758017911a4 ("ice: restore timestamp configuration after device reset") https://lore.kernel.org/all/20231121211259.3348630-1-anthony.l.nguyen@intel.com/ Adjacent changes: kernel/bpf/verifier.c bb124da69c47 ("bpf: keep track of max number of bpf_loop callback iterations") 5f99f312bd3b ("bpf: add register bounds sanity checks and sanitization") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23i40e: Fix adding unsupported cloud filtersIvan Vecera
If a VF tries to add unsupported cloud filter through virtchnl then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but this error code is stored in 'ret' instead of 'aq_ret' that is used as error code sent back to VF. In this scenario where one of the mentioned functions fails the value of 'aq_ret' is zero so the VF will incorrectly receive a 'success'. Use 'aq_ret' to store return value and remove 'ret' local variable. Additionally fix the issue when filter allocation fails, in this case no notification is sent back to the VF. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>