| Age | Commit message (Collapse) | Author |
|---|
|
* for-next/sysreg-gen: (32 commits)
: Automatic system register definition generation.
arm64/sysreg: Generate definitions for FAR_ELx
arm64/sysreg: Generate definitions for DACR32_EL2
arm64/sysreg: Generate definitions for CSSELR_EL1
arm64/sysreg: Generate definitions for CPACR_ELx
arm64/sysreg: Generate definitions for CONTEXTIDR_ELx
arm64/sysreg: Generate definitions for CLIDR_EL1
arm64/sve: Generate ZCR definitions
arm64/sme: Generate defintions for SVCR
arm64/sme: Generate SMPRI_EL1 definitions
arm64/sme: Automatically generate SMPRIMAP_EL2 definitions
arm64/sme: Automatically generate SMIDR_EL1 defines
arm64/sme: Automatically generate defines for SMCR
arm64/sysreg: Support generation of RAZ fields
arm64/sme: Remove _EL0 from name of SVCR - FIXME sysreg.h
arm64/sme: Standardise bitfield names for SVCR
arm64/sme: Drop SYS_ from SMIDR_EL1 defines
arm64/fp: Rename SVE and SME LEN field name to _WIDTH
arm64/fp: Make SVE and SME length register definition match architecture
arm64/sysreg: fix odd line spacing
arm64/sysreg: improve comment for regs without fields
...
|
|
'for-next/fault-in-subpage', 'for-next/misc', 'for-next/ftrace' and 'for-next/crashkernel', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf/arm-cmn: Decode CAL devices properly in debugfs
perf/arm-cmn: Fix filter_sel lookup
perf/marvell_cn10k: Fix tad_pmu_event_init() to check pmu type first
drivers/perf: hisi: Add Support for CPA PMU
drivers/perf: hisi: Associate PMUs in SICL with CPUs online
drivers/perf: arm_spe: Expose saturating counter to 16-bit
perf/arm-cmn: Add CMN-700 support
perf/arm-cmn: Refactor occupancy filter selector
perf/arm-cmn: Add CMN-650 support
dt-bindings: perf: arm-cmn: Add CMN-650 and CMN-700
perf: check return value of armpmu_request_irq()
perf: RISC-V: Remove non-kernel-doc ** comments
* for-next/sme: (30 commits)
: Scalable Matrix Extensions support.
arm64/sve: Move sve_free() into SVE code section
arm64/sve: Make kernel FPU protection RT friendly
arm64/sve: Delay freeing memory in fpsimd_flush_thread()
arm64/sme: More sensibly define the size for the ZA register set
arm64/sme: Fix NULL check after kzalloc
arm64/sme: Add ID_AA64SMFR0_EL1 to __read_sysreg_by_encoding()
arm64/sme: Provide Kconfig for SME
KVM: arm64: Handle SME host state when running guests
KVM: arm64: Trap SME usage in guest
KVM: arm64: Hide SME system registers from guests
arm64/sme: Save and restore streaming mode over EFI runtime calls
arm64/sme: Disable streaming mode and ZA when flushing CPU state
arm64/sme: Add ptrace support for ZA
arm64/sme: Implement ptrace support for streaming mode SVE registers
arm64/sme: Implement ZA signal handling
arm64/sme: Implement streaming SVE signal handling
arm64/sme: Disable ZA and streaming mode when handling signals
arm64/sme: Implement traps and syscall handling for SME
arm64/sme: Implement ZA context switching
arm64/sme: Implement streaming SVE context switching
...
* for-next/stacktrace:
: Stacktrace cleanups.
arm64: stacktrace: align with common naming
arm64: stacktrace: rename stackframe to unwind_state
arm64: stacktrace: rename unwinder functions
arm64: stacktrace: make struct stackframe private to stacktrace.c
arm64: stacktrace: delete PCS comment
arm64: stacktrace: remove NULL task check from unwind_frame()
* for-next/fault-in-subpage:
: btrfs search_ioctl() live-lock fix using fault_in_subpage_writeable().
btrfs: Avoid live-lock in search_ioctl() on hardware with sub-page faults
arm64: Add support for user sub-page fault probing
mm: Add fault_in_subpage_writeable() to probe at sub-page granularity
* for-next/misc:
: Miscellaneous patches.
arm64: Kconfig.platforms: Add comments
arm64: Kconfig: Fix indentation and add comments
arm64: mm: avoid writable executable mappings in kexec/hibernate code
arm64: lds: move special code sections out of kernel exec segment
arm64/hugetlb: Implement arm64 specific huge_ptep_get()
arm64/hugetlb: Use ptep_get() to get the pte value of a huge page
arm64: mm: Make arch_faults_on_old_pte() check for migratability
arm64: mte: Clean up user tag accessors
arm64/hugetlb: Drop TLB flush from get_clear_flush()
arm64: Declare non global symbols as static
arm64: mm: Cleanup useless parameters in zone_sizes_init()
arm64: fix types in copy_highpage()
arm64: Set ARCH_NR_GPIO to 2048 for ARCH_APPLE
arm64: cputype: Avoid overflow using MIDR_IMPLEMENTOR_MASK
arm64: document the boot requirements for MTE
arm64/mm: Compute PTRS_PER_[PMD|PUD] independently of PTRS_PER_PTE
* for-next/ftrace:
: ftrace cleanups.
arm64/ftrace: Make function graph use ftrace directly
ftrace: cleanup ftrace_graph_caller enable and disable
* for-next/crashkernel:
: Support for crashkernel reservations above ZONE_DMA.
arm64: kdump: Do not allocate crash low memory if not needed
docs: kdump: Update the crashkernel description for arm64
of: Support more than one crash kernel regions for kexec -s
of: fdt: Add memory for devices by DT property "linux,usable-memory-range"
arm64: kdump: Reimplement crashkernel=X
arm64: Use insert_resource() to simplify code
kdump: return -ENOENT if required cmdline option does not exist
|
|
Convert FAR_ELx to automatic register generation as per DDI0487H.a. In the
architecture these registers have a single field "named" as "Faulting
Virtual Address for synchronous exceptions taken to ELx" occupying the
entire register, in order to fit in with the requirement to describe the
contents of the register I have created a single field named ADDR.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220520161639.324236-7-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Convert DACR32_EL2 to automatic register generation as per DDI0487H.a, no
functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220520161639.324236-6-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Convert CSSELR_EL1 to automatic generation as per DDI0487H.a, no functional
change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220520161639.324236-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Convert the CPACR system register definitions to be automatically generated
using the definitions in DDI0487H.a. The kernel does have some additional
definitions for subfields of SMEN, FPEN and ZEN which are not identified as
distinct subfields in the architecture so the definitions are not updated
as part of this patch.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220520161639.324236-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Convert the various CONTEXTIDR_ELx register definitions to be automatically
generated following the definitions in DDI0487H.a. No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220520161639.324236-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Convert CLIDR_EL1 to be automatically generated with definition as per
DDI0487H.a. No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220520161639.324236-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
If CONFIG_ARM64_SVE is not set:
arch/arm64/kernel/fpsimd.c:294:13: warning: ‘sve_free’ defined but not used [-Wunused-function]
Fix this by moving sve_free() and __sve_free() into the existing section
protected by "#ifdef CONFIG_ARM64_SVE", now the last user outside that
section has been removed.
Fixes: a1259dd80719 ("arm64/sve: Delay freeing memory in fpsimd_flush_thread()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/cd633284683c24cb9469f8ff429915aedf67f868.1652798894.git.geert+renesas@glider.be
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add trailing comments to endmenu statements for better readability.
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20220517141648.331976-3-juergh@canonical.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.
While add it, add trailing comments to endif and endmenu statements for
better readability.
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20220517141648.331976-2-juergh@canonical.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The temporary mappings of the low-level kexec and hibernate helpers are
created with both writable and executable attributes, which is not
necessary here, and generally best avoided. So use read-only, executable
attributes instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220429131347.3621090-3-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
There are a few code sections that are emitted into the kernel's
executable .text segment simply because they contain code, but are
actually never executed via this mapping, so they can happily live in a
region that gets mapped without executable permissions, reducing the
risk of being gadgetized.
Note that the kexec and hibernate region contents are always copied into
a fresh page, and so there is no need to align them as long as the
overall size of each is below 4 KiB.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220429131347.3621090-2-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Now we use huge_ptep_get() to get the pte value of a hugetlb page,
however it will only return one specific pte value for the CONT-PTE
or CONT-PMD size hugetlb on ARM64 system, which can contain several
continuous pte or pmd entries with same page table attributes. And it
will not take into account the subpages' dirty or young bits of a
CONT-PTE/PMD size hugetlb page.
So the huge_ptep_get() is inconsistent with huge_ptep_get_and_clear(),
which already takes account the dirty or young bits for any subpages
in this CONT-PTE/PMD size hugetlb [1]. Meanwhile we can miss dirty or
young flags statistics for hugetlb pages with current huge_ptep_get(),
such as the gather_hugetlb_stats() function, and CONT-PTE/PMD hugetlb
monitoring with DAMON.
Thus define an ARM64 specific huge_ptep_get() implementation as well as
enabling __HAVE_ARCH_HUGE_PTEP_GET, that will take into account any
subpages' dirty or young bits for CONT-PTE/PMD size hugetlb page, for
those functions that want to check the dirty and young flags of a hugetlb
page.
[1] https://lore.kernel.org/linux-mm/85bd80b4-b4fd-0d3f-a2e5-149559f2f387@oracle.com/
Suggested-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/624109a80ac4bbdf1e462dfa0b49e9f7c31a7c0d.1652496622.git.baolin.wang@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The original huge_ptep_get() on ARM64 is just a wrapper of ptep_get(),
which will not take into account any contig-PTEs dirty and access bits.
Meanwhile we will implement a new ARM64-specific huge_ptep_get()
interface in following patch, which will take into account any contig-PTEs
dirty and access bits. To keep the same efficient logic to get the pte
value, change to use ptep_get() as a preparation.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/5113ed6e103f995e1d0f0c9fda0373b761bbcad2.1652496622.git.baolin.wang@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When "crashkernel=X,high" is specified, the specified "crashkernel=Y,low"
memory is not required in the following corner cases:
1. If both CONFIG_ZONE_DMA and CONFIG_ZONE_DMA32 are disabled, it means
that the devices can access any memory.
2. If the system memory is small, the crash high memory may be allocated
from the DMA zones. If that happens, there's no need to allocate
another crash low memory because there's already one.
Add condition '(crash_base >= CRASH_ADDR_LOW_MAX)' to determine whether
the 'high' memory is allocated above DMA zones. Note: when both
CONFIG_ZONE_DMA and CONFIG_ZONE_DMA32 are disabled, the entire physical
memory is DMA accessible, CRASH_ADDR_LOW_MAX equals 'PHYS_MASK + 1'.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20220511032033.426-1-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Convert the various ZCR instances to automatic generation, no functional
changes expected.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220510161208.631259-13-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Convert SVCR to automatic generation, no functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220510161208.631259-12-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Convert SMPRI_EL1 to be generated. No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220510161208.631259-11-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
No functional change should be seen from converting SMPRIMAP_EL2 to be
generated.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220510161208.631259-10-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Automatically generate the defines for SMIDR_EL1, no functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220510161208.631259-9-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Convert SMCR to use the register definition code, no functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220510161208.631259-8-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add a statement for RAZ bitfields to the automatic register generation
script. Nothing is emitted to the header for these fields.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220510161208.631259-7-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The defines for SVCR call it SVCR_EL0 however the architecture calls the
register SVCR with no _EL0 suffix. In preparation for generating the sysreg
definitions rename to match the architecture, no functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220510161208.631259-6-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The bitfield definitions for SVCR have a SYS_ added to the names of the
constant which will be a problem for automatic generation. Remove the
prefixes, no functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220510161208.631259-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We currently have a non-standard SYS_ prefix in the constants generated
for SMIDR_EL1 bitfields. Drop this in preparation for automatic register
definition generation, no functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220510161208.631259-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The SVE and SVE length configuration field LEN have constants specifying
their width called _SIZE rather than the more normal _WIDTH, in preparation
for automatic generation rename to _WIDTH. No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220510161208.631259-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently (as of DDI0487H.a) the architecture defines the vector length
control field in ZCR and SMCR as being 4 bits wide with an additional 5
bits reserved above it marked as RAZ/WI for future expansion. The kernel
currently attempts to anticipate such expansion by treating these extra
bits as part of the LEN field but this will be inconvenient when we start
generating the defines and would cause problems in the event that the
architecture goes a different direction with these fields. Let's instead
change the defines to reflect the currently defined architecture, we can
update in future as needed.
No change in behaviour should be seen in any system, even emulated systems
using the maximum allowed vector length for the current architecture.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220510161208.631259-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
* for-next/sme: (29 commits)
: Scalable Matrix Extensions support.
arm64/sve: Make kernel FPU protection RT friendly
arm64/sve: Delay freeing memory in fpsimd_flush_thread()
arm64/sme: More sensibly define the size for the ZA register set
arm64/sme: Fix NULL check after kzalloc
arm64/sme: Add ID_AA64SMFR0_EL1 to __read_sysreg_by_encoding()
arm64/sme: Provide Kconfig for SME
KVM: arm64: Handle SME host state when running guests
KVM: arm64: Trap SME usage in guest
KVM: arm64: Hide SME system registers from guests
arm64/sme: Save and restore streaming mode over EFI runtime calls
arm64/sme: Disable streaming mode and ZA when flushing CPU state
arm64/sme: Add ptrace support for ZA
arm64/sme: Implement ptrace support for streaming mode SVE registers
arm64/sme: Implement ZA signal handling
arm64/sme: Implement streaming SVE signal handling
arm64/sme: Disable ZA and streaming mode when handling signals
arm64/sme: Implement traps and syscall handling for SME
arm64/sme: Implement ZA context switching
arm64/sme: Implement streaming SVE context switching
arm64/sme: Implement SVCR context switching
...
|
|
Non RT kernels need to protect FPU against preemption and bottom half
processing. This is achieved by disabling bottom halves via
local_bh_disable() which implictly disables preemption.
On RT kernels this protection mechanism is not sufficient because
local_bh_disable() does not disable preemption. It serializes bottom half
related processing via a CPU local lock.
As bottom halves are running always in thread context on RT kernels
disabling preemption is the proper choice as it implicitly prevents bottom
half processing.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220505163207.85751-3-bigeasy@linutronix.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
fpsimd_flush_thread() invokes kfree() via sve_free()+sme_free() within a
preempt disabled section which is not working on -RT.
Delay freeing of memory until preemption is enabled again.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220505163207.85751-2-bigeasy@linutronix.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
arch_faults_on_old_pte() relies on the calling context being
non-preemptible. CONFIG_PREEMPT_RT turns the PTE lock into a sleepable
spinlock, which doesn't disable preemption once acquired, triggering the
warning in arch_faults_on_old_pte().
It does however disable migration, ensuring the task remains on the same
CPU during the entirety of the critical section, making the read of
cpu_has_hw_af() safe and stable.
Make arch_faults_on_old_pte() check cant_migrate() instead of preemptible().
Cc: Valentin Schneider <vschneid@redhat.com>
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20220127192437.1192957-1-valentin.schneider@arm.com
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220505163207.85751-4-bigeasy@linutronix.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Invoking user_ldst to explicitly add a post-increment of 0 is silly.
Just use a normal USER() annotation and save the redundant instruction.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Tong Tiangen <tongtiangen@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220420030418.3189040-6-tongtiangen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Between the header and the definitions, there's no line gap, and in a
couple of places a double line gap for no semantic reason, which makes
the output look a little odd.
Fix this so blocks are consistently separated with a single line gap:
* Add a newline after the "Generated file" comment line, so this is
clearly split from whatever the first definition in the file is.
* At the start of a SysregFields block there's no need for a newline as
we haven't output any sysreg encoding details prior to this.
* At the end of a Sysreg block there's no need for a newline if we
have no RES0 or RES1 fields, as there will be a line gap after the
previous element (e.g. a Fields line).
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220513174118.266966-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently for registers without fields we create a comment pointing at
the common definitions, e.g.
| #define REG_TTBR0_EL1 S3_0_C2_C0_0
| #define SYS_TTBR0_EL1 sys_reg(3, 0, 2, 0, 0)
| #define SYS_TTBR0_EL1_Op0 3
| #define SYS_TTBR0_EL1_Op1 0
| #define SYS_TTBR0_EL1_CRn 2
| #define SYS_TTBR0_EL1_CRm 0
| #define SYS_TTBR0_EL1_Op2 0
|
| /* See TTBRx_EL1 */
It would be slightly nicer if the comment said what we should be looking
for, e.g.
| #define REG_TTBR0_EL1 S3_0_C2_C0_0
| #define SYS_TTBR0_EL1 sys_reg(3, 0, 2, 0, 0)
| #define SYS_TTBR0_EL1_Op0 3
| #define SYS_TTBR0_EL1_Op1 0
| #define SYS_TTBR0_EL1_CRn 2
| #define SYS_TTBR0_EL1_CRm 0
| #define SYS_TTBR0_EL1_Op2 0
|
| /* For TTBR0_EL1 fields see TTBRx_EL1 */
Update the comment generation accordingly.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220513174118.266966-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This drops now redundant TLB flush in get_clear_flush() which is no longer
required after recent commit 697a1d44af8b ("tlb: hugetlb: Add more sizes to
tlb_remove_huge_tlb_entry"). It also renames this function i.e dropping off
'_flush' and replacing it with '__contig' as appropriate.
Cc: Will Deacon <will@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220510043930.2410985-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Fix below sparse warnings introduced while adding errata.
arch/arm64/kernel/cpu_errata.c:218:25: sparse: warning: symbol
'cavium_erratum_23154_cpus' was not declared. Should it be static?
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220509043221.16361-1-lcherian@marvell.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
There are following issues in arm64 kdump:
1. We use crashkernel=X to reserve crashkernel in DMA zone, which
will fail when there is not enough low memory.
2. If reserving crashkernel above DMA zone, in this case, crash dump
kernel will fail to boot because there is no low memory available
for allocation.
To solve these issues, introduce crashkernel=X,[high,low].
The "crashkernel=X,high" is used to select a region above DMA zone, and
the "crashkernel=Y,low" is used to allocate specified size low memory.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Co-developed-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20220506114402.365-4-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
insert_resource() traverses the subtree layer by layer from the root node
until a proper location is found. Compared with request_resource(), the
parent node does not need to be determined in advance.
In addition, move the insertion of node 'crashk_res' into function
reserve_crashkernel() to make the associated code close together.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20220506114402.365-3-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Since the vector length configuration mechanism is identical between SVE
and SME we share large elements of the code including the definition for
the maximum vector length. Unfortunately when we were defining the ABI
for SVE we included not only the actual maximum vector length of 2048
bits but also the value possible if all the bits reserved in the
architecture for expansion of the LEN field were used, 16384 bits.
This starts creating problems if we try to allocate anything for the ZA
matrix based on the maximum possible vector length, as we do for the
regset used with ptrace during the process of generating a core dump.
While the maximum potential size for ZA with the current architecture is
a reasonably managable 64K with the higher reserved limit ZA would be
64M which leads to entirely reasonable complaints from the memory
management code when we try to allocate a buffer of that size. Avoid
these issues by defining the actual maximum vector length for the
architecture and using it for the SME regsets.
Also use the full ZA_PT_SIZE() with the header rather than just the
actual register payload when specifying the size, fixing support for the
largest vector lengths now that we have this new, lower define. With the
SVE maximum this did not cause problems due to the extra headroom we
had.
While we're at it add a comment clarifying why even though ZA is a
single register we tell the regset code that it is a multi-register
regset.
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/r/20220505221517.1642014-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Directly use max_pfn for max and no one use min, kill them.
Reviewed-by: Vijay Balakrishna <vijayb@linux.microsoft.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20220411092455.1461-4-wangkefeng.wang@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In copy_highpage() the `kto` and `kfrom` local variables are pointers to
struct page, but these are used to hold arbitrary pointers to kernel memory
. Each call to page_address() returns a void pointer to memory associated
with the relevant page, and copy_page() expects void pointers to this
memory.
This inconsistency was introduced in commit 2563776b41c3 ("arm64: mte:
Tags-aware copy_{user_,}highpage() implementations") and while this
doesn't appear to be harmful in practice it is clearly wrong.
Correct this by making `kto` and `kfrom` void pointers.
Fixes: 2563776b41c3 ("arm64: mte: Tags-aware copy_{user_,}highpage() implementations")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20220420030418.3189040-3-tongtiangen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Automatically generate register definitions for SCTLR_EL1. No functional
change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220503170233.507788-13-broonie@kernel.org
[catalin.marinas@arm.com: fix the SCTLR_EL1 encoding]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We're already running into the 512 GPIO limit on t600[01] depending on
how many SMC GPIOs we allocate, and a 2-die version could double that.
Let's make it 2K to be safe for now.
Signed-off-by: Hector Martin <marcan@marcan.st>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220502091427.28416-1-marcan@marcan.st
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Automatically generate definitions for accessing the TTBRn_EL1 registers,
no functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220503170233.507788-12-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Remove the manual definitions for ID_AA64ISAR0_EL1 in favour of automatic
generation. There should be no functional change. The only notable change
is that 27:24 TME is defined rather than RES0 reflecting DDI0487H.a.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220503170233.507788-11-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Now that we have a script for generating system registers hook it up to the
build system similarly to cpucaps. Since we don't currently have any actual
register information in the input file this should produce no change in the
built kernel. For ease of review the register information will be converted
in separate patches.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220503170233.507788-10-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The arm64 kernel requires some metadata for each system register it may
need to access. Currently we have:
* A SYS_<regname> definition which sorresponds to a sys_reg() macro.
This is used both to look up a sysreg by encoding (e.g. in KVM), and
also to generate code to access a sysreg where the assembler is
unaware of the specific sysreg encoding.
Where assemblers support the S3_<op1>_C<crn>_C<crm>_<op2> syntax for
system registers, we could use this rather than manually assembling
the instructions. However, we don't have consistent definitions for
these and we currently still need to handle toolchains that lack this
feature.
* A set of <regname>_<fieldname>_SHIFT and <regname>_<fieldname>_MASK
definitions, which can be used to extract fields from the register, or
to construct a register from a set of fields.
These do not follow the convention used by <linux/bitfield.h>, and the
masks are not shifted into place, preventing their use in FIELD_PREP()
and FIELD_GET(). We require the SHIFT definitions for inline assembly
(and WIDTH definitions would be helpful for UBFX/SBFX), so we cannot
only define a shifted MASK. Defining a SHIFT, WIDTH, shifted MASK and
unshifted MASK is tedious and error-prone and life is much easier when
they can be relied up to exist when writing code.
* A set of <regname>_<fieldname>_<valname> definitions for each
enumerated value a field may hold. These are used when identifying the
presence of features.
Atop of this, other code has to build up metadata at runtime (e.g. the
sets of RES0/RES1 bits in a register).
This patch adds scripting so that we can have an easier-to-manage
canonical representation of this metadata, from which we can generate
all the definitions necessary for various use-cases, e.g.
| #define REG_ID_AA64ISAR0_EL1 S3_0_C0_C6_0
| #define SYS_ID_AA64ISAR0_EL1 sys_reg(3, 0, 0, 6, 0)
| #define SYS_ID_AA64ISAR0_EL1_Op0 3
| #define SYS_ID_AA64ISAR0_EL1_Op1 0
| #define SYS_ID_AA64ISAR0_EL1_CRn 0
| #define SYS_ID_AA64ISAR0_EL1_CRm 6
| #define SYS_ID_AA64ISAR0_EL1_Op2 0
| #define ID_AA64ISAR0_EL1_RNDR GENMASK(63, 60)
| #define ID_AA64ISAR0_EL1_RNDR_MASK GENMASK(63, 60)
| #define ID_AA64ISAR0_EL1_RNDR_SHIFT 60
| #define ID_AA64ISAR0_EL1_RNDR_WIDTH 4
| #define ID_AA64ISAR0_EL1_RNDR_NI UL(0b0000)
| #define ID_AA64ISAR0_EL1_RNDR_IMP UL(0b0001)
The script requires that all bits in the register be specified and that
there be no overlapping fields. This helps the script spot errors in the
input but means that the few registers which change layout at runtime
depending on things like virtualisation settings will need some manual
handling. No actual register conversions are done here but a header for
the register data with some documention of the format is provided.
For cases where multiple registers share a layout (eg, when identical
controls are provided at multiple ELs) the register fields can be
defined once and referenced from the actual registers, currently we do
not generate actual defines for the individual registers.
At the moment this is only intended to express metadata from the
architecture, and does not handle policy imposed by the kernel, such as
values exposed to userspace or VMs. In future this could be extended to
express such information.
This script was mostly written by Mark Rutland but has been extended by
Mark Brown to improve validation of input and better integrate with the
kernel.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Co-Developed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220503170233.507788-9-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The macros for accessing fields in ID_AA64ISAR0_EL1 omit the _EL1 from the
name of the register. In preparation for converting this register to be
automatically generated update the names to include an _EL1, there should
be no functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220503170233.507788-8-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The architecture reference manual refers to the field in bits 23:20 of
ID_AA64ISAR0_EL1 with the name "atomic" but the kernel defines for this
bitfield use the name "atomics". Bring the two into sync to make it easier
to cross reference with the specification.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220503170233.507788-7-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
