| Age | Commit message (Collapse) | Author |
|---|
|
The codegen for is_mov_percpu_addr instruction works for rax/r8 registers
only. Fix it to generate proper x86 byte code for other registers.
Fixes: 7bdbf7446305 ("bpf: add special internal-only MOV instruction to resolve per-CPU addrs")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240417214406.15788-1-alexei.starovoitov@gmail.com
|
|
Support atomics in bpf_arena that can be JITed as a single x86 instruction.
Instructions that are JITed as loops are not supported at the moment,
since they require more complex extable and loop logic.
JITs can choose to do smarter things with bpf_jit_supports_insn().
Like arm64 may decide to support all bpf atomics instructions
when emit_lse_atomic is available and none in ll_sc mode.
bpf_jit_supports_percpu_insn(), bpf_jit_supports_ptr_xchg() and
other such callbacks can be replaced with bpf_jit_supports_insn()
in the future.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240405231134.17274-1-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
LLVM generates bpf_addr_space_cast instruction while translating
pointers between native (zero) address space and
__attribute__((address_space(N))). The addr_space=0 is reserved as
bpf_arena address space.
rY = addr_space_cast(rX, 0, 1) is processed by the verifier and
converted to normal 32-bit move: wX = wY
rY = addr_space_cast(rX, 1, 0) has to be converted by JIT.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240404114203.105970-3-puranjay12@gmail.com
|
|
Add support for [LDX | STX | ST], PROBE_MEM32, [B | H | W | DW]
instructions. They are similar to PROBE_MEM instructions with the
following differences:
- PROBE_MEM32 supports store.
- PROBE_MEM32 relies on the verifier to clear upper 32-bit of the
src/dst register
- PROBE_MEM32 adds 64-bit kern_vm_start address (which is stored in S7
in the prologue). Due to bpf_arena constructions such S7 + reg +
off16 access is guaranteed to be within arena virtual range, so no
address check at run-time.
- S11 is a free callee-saved register, so it is used to store kern_vm_start
- PROBE_MEM32 allows STX and ST. If they fault the store is a nop. When
LDX faults the destination register is zeroed.
To support these on riscv, we do tmp = S7 + src/dst reg and then use
tmp2 as the new src/dst register. This allows us to reuse most of the
code for normal [LDX | STX | ST].
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240404114203.105970-2-puranjay12@gmail.com
|
|
Turned out that bpf prog callback addresses, bpf prog addresses
used in bpf_trampoline, and in other cases the 64-bit address
can be represented as sign extended 32-bit value.
According to https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82339
"Skylake has 0.64c throughput for mov r64, imm64, vs. 0.25 for mov r32, imm32."
So use shorter encoding and faster instruction when possible.
Special care is needed in jit_subprogs(), since bpf_pseudo_func()
instruction cannot change its size during the last step of JIT.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/CAADnVQKFfpY-QZBrOU2CG8v2du8Lgyb7MNVmOZVK_yTyOdNbBA@mail.gmail.com
Link: https://lore.kernel.org/bpf/20240401233800.42737-1-alexei.starovoitov@gmail.com
|
|
On non-SMP systems, there is no "per-CPU" data, it's just global data.
So in such case just don't do this_cpu_off-based per-CPU address adjustment.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404040951.d4CUx5S6-lkp@intel.com/
Fixes: 7bdbf7446305 ("bpf: add special internal-only MOV instruction to resolve per-CPU addrs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240404034726.2766740-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a new BPF instruction for resolving absolute addresses of per-CPU
data from their per-CPU offsets. This instruction is internal-only and
users are not allowed to use them directly. They will only be used for
internal inlining optimizations for now between BPF verifier and BPF JITs.
We use a special BPF_MOV | BPF_ALU64 | BPF_X form with insn->off field
set to BPF_ADDR_PERCPU = -1. I used negative offset value to distinguish
them from positive ones used by user-exposed instructions.
Such instruction performs a resolution of a per-CPU offset stored in
a register to a valid kernel address which can be dereferenced. It is
useful in any use case where absolute address of a per-CPU data has to
be resolved (e.g., in inlining bpf_map_lookup_elem()).
BPF disassembler is also taught to recognize them to support dumping
final BPF assembly code (non-JIT'ed version).
Add arch-specific way for BPF JITs to mark support for this instructions.
This patch also adds support for these instructions in x86-64 BPF JIT.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240402021307.1012571-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
LLVM generates bpf_addr_space_cast instruction while translating
pointers between native (zero) address space and
__attribute__((address_space(N))). The addr_space=0 is reserved as
bpf_arena address space.
rY = addr_space_cast(rX, 0, 1) is processed by the verifier and
converted to normal 32-bit move: wX = wY.
rY = addr_space_cast(rX, 1, 0) : used to convert a bpf arena pointer to
a pointer in the userspace vma. This has to be converted by the JIT.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240325150716.4387-3-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support for [LDX | STX | ST], PROBE_MEM32, [B | H | W | DW]
instructions. They are similar to PROBE_MEM instructions with the
following differences:
- PROBE_MEM32 supports store.
- PROBE_MEM32 relies on the verifier to clear upper 32-bit of the
src/dst register
- PROBE_MEM32 adds 64-bit kern_vm_start address (which is stored in R28
in the prologue). Due to bpf_arena constructions such R28 + reg +
off16 access is guaranteed to be within arena virtual range, so no
address check at run-time.
- PROBE_MEM32 allows STX and ST. If they fault the store is a nop. When
LDX faults the destination register is zeroed.
To support these on arm64, we do tmp2 = R28 + src/dst reg and then use
tmp2 as the new src/dst register. This allows us to reuse most of the
code for normal [LDX | STX | ST].
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240325150716.4387-2-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, WiFi and netfilter.
Current release - regressions:
- ipv6: fix address dump when IPv6 is disabled on an interface
Current release - new code bugs:
- bpf: temporarily disable atomic operations in BPF arena
- nexthop: fix uninitialized variable in nla_put_nh_group_stats()
Previous releases - regressions:
- bpf: protect against int overflow for stack access size
- hsr: fix the promiscuous mode in offload mode
- wifi: don't always use FW dump trig
- tls: adjust recv return with async crypto and failed copy to
userspace
- tcp: properly terminate timers for kernel sockets
- ice: fix memory corruption bug with suspend and rebuild
- at803x: fix kernel panic with at8031_probe
- qeth: handle deferred cc1
Previous releases - always broken:
- bpf: fix bug in BPF_LDX_MEMSX
- netfilter: reject table flag and netdev basechain updates
- inet_defrag: prevent sk release while still in use
- wifi: pick the version of SESSION_PROTECTION_NOTIF
- wwan: t7xx: split 64bit accesses to fix alignment issues
- mlxbf_gige: call request_irq() after NAPI initialized
- hns3: fix kernel crash when devlink reload during pf
initialization"
* tag 'net-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
inet: inet_defrag: prevent sk release while still in use
Octeontx2-af: fix pause frame configuration in GMP mode
net: lan743x: Add set RFE read fifo threshold for PCI1x1x chips
net: bcmasp: Remove phy_{suspend/resume}
net: bcmasp: Bring up unimac after PHY link up
net: phy: qcom: at803x: fix kernel panic with at8031_probe
netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c
netfilter: nf_tables: skip netdev hook unregistration if table is dormant
netfilter: nf_tables: reject table flag and netdev basechain updates
netfilter: nf_tables: reject destroy command to remove basechain hooks
bpf: update BPF LSM designated reviewer list
bpf: Protect against int overflow for stack access size
bpf: Check bloom filter map value size
bpf: fix warning for crash_kexec
selftests: netdevsim: set test timeout to 10 minutes
net: wan: framer: Add missing static inline qualifiers
mlxbf_gige: call request_irq() after NAPI initialized
tls: get psock ref after taking rxlock to avoid leak
selftests: tls: add test with a partially invalid iov
tls: adjust recv return with async crypto and failed copy to userspace
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-03-25
We've added 38 non-merge commits during the last 13 day(s) which contain
a total of 50 files changed, 867 insertions(+), 274 deletions(-).
The main changes are:
1) Add the ability to specify and retrieve BPF cookie also for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints, from Andrii Nakryiko.
2) Allow the use of bpf_get_{ns_,}current_pid_tgid() helper for all
program types and add additional BPF selftests, from Yonghong Song.
3) Several improvements to bpftool and its build, for example, enabling
libbpf logs when loading pid_iter in debug mode, from Quentin Monnet.
4) Check the return code of all BPF-related set_memory_*() functions during
load and bail out in case they fail, from Christophe Leroy.
5) Avoid a goto in regs_refine_cond_op() such that the verifier can
be better integrated into Agni tool which doesn't support backedges
yet, from Harishankar Vishwanathan.
6) Add a small BPF trie perf improvement by always inlining
longest_prefix_match, from Jesper Dangaard Brouer.
7) Small BPF selftest refactor in bpf_tcp_ca.c to utilize start_server()
helper instead of open-coding it, from Geliang Tang.
8) Improve test_tc_tunnel.sh BPF selftest to prevent client connect
before the server bind, from Alessandro Carminati.
9) Fix BPF selftest benchmark for older glibc and use syscall(SYS_gettid)
instead of gettid(), from Alan Maguire.
10) Implement a backward-compatible method for struct_ops types with
additional fields which are not present in older kernels,
from Kui-Feng Lee.
11) Add a small helper to check if an instruction is addr_space_cast
from as(0) to as(1) and utilize it in x86-64 JIT, from Puranjay Mohan.
12) Small cleanup to remove unnecessary error check in
bpf_struct_ops_map_update_elem, from Martin KaFai Lau.
13) Improvements to libbpf fd validity checks for BPF map/programs,
from Mykyta Yatsenko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (38 commits)
selftests/bpf: Fix flaky test btf_map_in_map/lookup_update
bpf: implement insn_is_cast_user() helper for JITs
bpf: Avoid get_kernel_nofault() to fetch kprobe entry IP
selftests/bpf: Use start_server in bpf_tcp_ca
bpf: Sync uapi bpf.h to tools directory
libbpf: Add new sec_def "sk_skb/verdict"
selftests/bpf: Mark uprobe trigger functions with nocf_check attribute
selftests/bpf: Use syscall(SYS_gettid) instead of gettid() wrapper in bench
bpf-next: Avoid goto in regs_refine_cond_op()
bpftool: Clean up HOST_CFLAGS, HOST_LDFLAGS for bootstrap bpftool
selftests/bpf: scale benchmark counting by using per-CPU counters
bpftool: Remove unnecessary source files from bootstrap version
bpftool: Enable libbpf logs when loading pid_iter in debug mode
selftests/bpf: add raw_tp/tp_btf BPF cookie subtests
libbpf: add support for BPF cookie for raw_tp/tp_btf programs
bpf: support BPF cookie in raw tracepoint (raw_tp, tp_btf) programs
bpf: pass whole link instead of prog when triggering raw tracepoint
bpf: flatten bpf_probe_register call chain
selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh
selftests/bpf: Add a sk_msg prog bpf_get_ns_current_pid_tgid() test
...
====================
Link: https://lore.kernel.org/r/20240325233940.7154-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are regression reports[1][2] that crashkernel region on x86_64 can't
be added into iomem tree sometime. This causes the later failure of kdump
loading.
This happened after commit 4a693ce65b18 ("kdump: defer the insertion of
crashkernel resources") was merged.
Even though, these reported issues are proved to be related to other
component, they are just exposed after above commmit applied, I still
would like to keep crashk_res and crashk_low_res being added into iomem
early as before because the early adding has been always there on x86_64
and working very well. For safety of kdump, Let's change it back.
Here, add a macro HAVE_ARCH_ADD_CRASH_RES_TO_IOMEM_EARLY to limit that
only ARCH defining the macro can have the early adding
crashk_res/_low_res into iomem. Then define
HAVE_ARCH_ADD_CRASH_RES_TO_IOMEM_EARLY on x86 to enable it.
Note: In reserve_crashkernel_low(), there's a remnant of crashk_low_res
handling which was mistakenly added back in commit 85fcde402db1 ("kexec:
split crashkernel reservation code out from crash_core.c").
[1]
[PATCH V2] x86/kexec: do not update E820 kexec table for setup_data
https://lore.kernel.org/all/Zfv8iCL6CT2JqLIC@darkstar.users.ipa.redhat.com/T/#u
[2]
Question about Address Range Validation in Crash Kernel Allocation
https://lore.kernel.org/all/4eeac1f733584855965a2ea62fa4da58@huawei.com/T/#u
Link: https://lkml.kernel.org/r/ZgDYemRQ2jxjLkq+@MiWiFi-R3L-srv
Fixes: 4a693ce65b18 ("kdump: defer the insertion of crashkernel resources")
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After the linked LLVM change, the build fails with
CONFIG_LD_ORPHAN_WARN_LEVEL="error", which happens with allmodconfig:
ld.lld: error: vmlinux.a(init/main.o):(.hexagon.attributes) is being placed in '.hexagon.attributes'
Handle the attributes section in a similar manner as arm and riscv by
adding it after the primary ELF_DETAILS grouping in vmlinux.lds.S, which
fixes the error.
Link: https://lkml.kernel.org/r/20240319-hexagon-handle-attributes-section-vmlinux-lds-s-v1-1-59855dab8872@kernel.org
Fixes: 113616ec5b64 ("hexagon: select ARCH_WANT_LD_ORPHAN_WARN")
Link: https://github.com/llvm/llvm-project/commit/31f4b329c8234fab9afa59494d7f8bdaeaefeaad
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On v5 and lower CPUs we can't provide MDWE protection, so ensure we fail
any attempt to enable it via prctl(PR_SET_MDWE).
Previously such an attempt would misleadingly succeed, leading to any
subsequent mmap(PROT_READ|PROT_WRITE) or execve() failing unconditionally
(the latter somewhat violently via force_fatal_sig(SIGSEGV) due to
READ_IMPLIES_EXEC).
Link: https://lkml.kernel.org/r/20240227013546.15769-6-zev@bewilderbeest.net
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: <stable@vger.kernel.org> [6.3+]
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sam James <sam@gentoo.org>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "ARM: prctl: Reject PR_SET_MDWE where not supported".
I noticed after a recent kernel update that my ARM926 system started
segfaulting on any execve() after calling prctl(PR_SET_MDWE). After some
investigation it appears that ARMv5 is incapable of providing the
appropriate protections for MDWE, since any readable memory is also
implicitly executable.
The prctl_set_mdwe() function already had some special-case logic added
disabling it on PARISC (commit 793838138c15, "prctl: Disable
prctl(PR_SET_MDWE) on parisc"); this patch series (1) generalizes that
check to use an arch_*() function, and (2) adds a corresponding override
for ARM to disable MDWE on pre-ARMv6 CPUs.
With the series applied, prctl(PR_SET_MDWE) is rejected on ARMv5 and
subsequent execve() calls (as well as mmap(PROT_READ|PROT_WRITE)) can
succeed instead of unconditionally failing; on ARMv6 the prctl works as it
did previously.
[0] https://lore.kernel.org/all/2023112456-linked-nape-bf19@gregkh/
This patch (of 2):
There exist systems other than PARISC where MDWE may not be feasible to
support; rather than cluttering up the generic code with additional
arch-specific logic let's add a generic function for checking MDWE support
and allow each arch to override it as needed.
Link: https://lkml.kernel.org/r/20240227013546.15769-4-zev@bewilderbeest.net
Link: https://lkml.kernel.org/r/20240227013546.15769-5-zev@bewilderbeest.net
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sam James <sam@gentoo.org>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: <stable@vger.kernel.org> [6.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-03-25
The following pull-request contains BPF updates for your *net* tree.
We've added 17 non-merge commits during the last 12 day(s) which contain
a total of 19 files changed, 184 insertions(+), 61 deletions(-).
The main changes are:
1) Fix an arm64 BPF JIT bug in BPF_LDX_MEMSX implementation's offset handling
found via test_bpf module, from Puranjay Mohan.
2) Various fixups to the BPF arena code in particular in the BPF verifier and
around BPF selftests to match latest corresponding LLVM implementation,
from Puranjay Mohan and Alexei Starovoitov.
3) Fix xsk to not assume that metadata is always requested in TX completion,
from Stanislav Fomichev.
4) Fix riscv BPF JIT's kfunc parameter incompatibility between BPF and the riscv
ABI which requires sign-extension on int/uint, from Pu Lehui.
5) Fix s390x BPF JIT's bpf_plt pointer arithmetic which triggered a crash when
testing struct_ops, from Ilya Leoshkevich.
6) Fix libbpf's arena mmap handling which had incorrect u64-to-pointer cast on
32-bit architectures, from Andrii Nakryiko.
7) Fix libbpf to define MFD_CLOEXEC when not available, from Arnaldo Carvalho de Melo.
8) Fix arm64 BPF JIT implementation for 32bit unconditional bswap which
resulted in an incorrect swap as indicated by test_bpf, from Artem Savkov.
9) Fix BPF man page build script to use silent mode, from Hangbin Liu.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
riscv, bpf: Fix kfunc parameters incompatibility between bpf and riscv abi
bpf: verifier: reject addr_space_cast insn without arena
selftests/bpf: verifier_arena: fix mmap address for arm64
bpf: verifier: fix addr_space_cast from as(1) to as(0)
libbpf: Define MFD_CLOEXEC if not available
arm64: bpf: fix 32bit unconditional bswap
bpf, arm64: fix bug in BPF_LDX_MEMSX
libbpf: fix u64-to-pointer cast on 32-bit arches
s390/bpf: Fix bpf_plt pointer arithmetic
xsk: Don't assume metadata is always requested in TX completion
selftests/bpf: Add arena test case for 4Gbyte corner case
selftests/bpf: Remove hard coded PAGE_SIZE macro.
libbpf, selftests/bpf: Adjust libbpf, bpftool, selftests to match LLVM
bpf: Clarify bpf_arena comments.
MAINTAINERS: Update email address for Quentin Monnet
scripts/bpf_doc: Use silent mode when exec make cmd
bpf: Temporarily disable atomic operations in BPF arena
====================
Link: https://lore.kernel.org/r/20240325213520.26688-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We encountered a failing case when running selftest in no_alu32 mode:
The failure case is `kfunc_call/kfunc_call_test4` and its source code is
like bellow:
```
long bpf_kfunc_call_test4(signed char a, short b, int c, long d) __ksym;
int kfunc_call_test4(struct __sk_buff *skb)
{
...
tmp = bpf_kfunc_call_test4(-3, -30, -200, -1000);
...
}
```
And its corresponding asm code is:
```
0: r1 = -3
1: r2 = -30
2: r3 = 0xffffff38 # opcode: 18 03 00 00 38 ff ff ff 00 00 00 00 00 00 00 00
4: r4 = -1000
5: call bpf_kfunc_call_test4
```
insn 2 is parsed to ld_imm64 insn to emit 0x00000000ffffff38 imm, and
converted to int type and then send to bpf_kfunc_call_test4. But since
it is zero-extended in the bpf calling convention, riscv jit will
directly treat it as an unsigned 32-bit int value, and then fails with
the message "actual 4294966063 != expected -1234".
The reason is the incompatibility between bpf and riscv abi, that is,
bpf will do zero-extension on uint, but riscv64 requires sign-extension
on int or uint. We can solve this problem by sign extending the 32-bit
parameters in kfunc.
The issue is related to [0], and thanks to Yonghong and Alexei.
Link: https://github.com/llvm/llvm-project/pull/84874 [0]
Fixes: d40c3847b485 ("riscv, bpf: Add kfunc support for RV64")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240324103306.2202954-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement a helper function to check if an instruction is
addr_space_cast from as(0) to as(1). Use this helper in the x86 JIT.
Other JITs can use this helper when they add support for this instruction.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240324183226.29674-1-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Fix logic that is supposed to prevent placement of the kernel image
below LOAD_PHYSICAL_ADDR
- Use the firmware stack in the EFI stub when running in mixed mode
- Clear BSS only once when using mixed mode
- Check efi.get_variable() function pointer for NULL before trying to
call it
* tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: fix panic in kdump kernel
x86/efistub: Don't clear BSS twice in mixed mode
x86/efistub: Call mixed mode boot services on the firmware's stack
efi/libstub: fix efi_random_alloc() to allocate memory at alloc_min or higher address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Ensure that the encryption mask at boot is properly propagated on
5-level page tables, otherwise the PGD entry is incorrectly set to
non-encrypted, which causes system crashes during boot.
- Undo the deferred 5-level page table setup as it cannot work with
memory encryption enabled.
- Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset
to the default value but the cached variable is not, so subsequent
comparisons might yield the wrong result and as a consequence the
result prevents updating the MSR.
- Register the local APIC address only once in the MPPARSE enumeration
to prevent triggering the related WARN_ONs() in the APIC and topology
code.
- Handle the case where no APIC is found gracefully by registering a
fake APIC in the topology code. That makes all related topology
functions work correctly and does not affect the actual APIC driver
code at all.
- Don't evaluate logical IDs during early boot as the local APIC IDs
are not yet enumerated and the invoked function returns an error
code. Nothing requires the logical IDs before the final CPUID
enumeration takes place, which happens after the enumeration.
- Cure the fallout of the per CPU rework on UP which misplaced the
copying of boot_cpu_data to per CPU data so that the final update to
boot_cpu_data got lost which caused inconsistent state and boot
crashes.
- Use copy_from_kernel_nofault() in the kprobes setup as there is no
guarantee that the address can be safely accessed.
- Reorder struct members in struct saved_context to work around another
kmemleak false positive
- Remove the buggy code which tries to update the E820 kexec table for
setup_data as that is never passed to the kexec kernel.
- Update the resource control documentation to use the proper units.
- Fix a Kconfig warning observed with tinyconfig
* tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/64: Move 5-level paging global variable assignments back
x86/boot/64: Apply encryption mask to 5-level pagetable update
x86/cpu: Add model number for another Intel Arrow Lake mobile processor
x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD
Documentation/x86: Document that resctrl bandwidth control units are MiB
x86/mpparse: Register APIC address only once
x86/topology: Handle the !APIC case gracefully
x86/topology: Don't evaluate logical IDs during early boot
x86/cpu: Ensure that CPU info updates are propagated on UP
kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address
x86/pm: Work around false positive kmemleak report in msr_build_context()
x86/kexec: Do not update E820 kexec table for setup_data
x86/config: Fix warning for 'make ARCH=x86_64 tinyconfig'
|
|
Normally, the EFI stub calls into the EFI boot services using the stack
that was live when the stub was entered. According to the UEFI spec,
this stack needs to be at least 128k in size - this might seem large but
all asynchronous processing and event handling in EFI runs from the same
stack and so quite a lot of space may be used in practice.
In mixed mode, the situation is a bit different: the bootloader calls
the 32-bit EFI stub entry point, which calls the decompressor's 32-bit
entry point, where the boot stack is set up, using a fixed allocation
of 16k. This stack is still in use when the EFI stub is started in
64-bit mode, and so all calls back into the EFI firmware will be using
the decompressor's limited boot stack.
Due to the placement of the boot stack right after the boot heap, any
stack overruns have gone unnoticed. However, commit
5c4feadb0011983b ("x86/decompressor: Move global symbol references to C code")
moved the definition of the boot heap into C code, and now the boot
stack is placed right at the base of BSS, where any overruns will
corrupt the end of the .data section.
While it would be possible to work around this by increasing the size of
the boot stack, doing so would affect all x86 systems, and mixed mode
systems are a tiny (and shrinking) fraction of the x86 installed base.
So instead, record the firmware stack pointer value when entering from
the 32-bit firmware, and switch to this stack every time a EFI boot
service call is made.
Cc: <stable@kernel.org> # v6.1+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Commit 63bed9660420 ("x86/startup_64: Defer assignment of 5-level paging
global variables") moved assignment of 5-level global variables to later
in the boot in order to avoid having to use RIP relative addressing in
order to set them. However, when running with 5-level paging and SME
active (mem_encrypt=on), the variables are needed as part of the page
table setup needed to encrypt the kernel (using pgd_none(), p4d_offset(),
etc.). Since the variables haven't been set, the page table manipulation
is done as if 4-level paging is active, causing the system to crash on
boot.
While only a subset of the assignments that were moved need to be set
early, move all of the assignments back into check_la57_support() so that
these assignments aren't spread between two locations. Instead of just
reverting the fix, this uses the new RIP_REL_REF() macro when assigning
the variables.
Fixes: 63bed9660420 ("x86/startup_64: Defer assignment of 5-level paging global variables")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/2ca419f4d0de719926fd82353f6751f717590a86.1711122067.git.thomas.lendacky@amd.com
|
|
When running with 5-level page tables, the kernel mapping PGD entry is
updated to point to the P4D table. The assignment uses _PAGE_TABLE_NOENC,
which, when SME is active (mem_encrypt=on), results in a page table
entry without the encryption mask set, causing the system to crash on
boot.
Change the assignment to use _PAGE_TABLE instead of _PAGE_TABLE_NOENC so
that the encryption mask is set for the PGD entry.
Fixes: 533568e06b15 ("x86/boot/64: Use RIP_REL_REF() to access early_top_pgt[]")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/8f20345cda7dbba2cf748b286e1bc00816fe649a.1711122067.git.thomas.lendacky@amd.com
|
|
This one is the regular laptop CPU.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240322161725.195614-1-tony.luck@intel.com
|
|
Commit 672365477ae8 ("x86/fpu: Update XFD state where required") and
commit 8bf26758ca96 ("x86/fpu: Add XFD state to fpstate") introduced a
per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in
order to avoid unnecessary writes to the MSR.
On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which
wipes out any stale state. But the per CPU cached xfd value is not
reset, which brings them out of sync.
As a consequence a subsequent xfd_update_state() might fail to update
the MSR which in turn can result in XRSTOR raising a #NM in kernel
space, which crashes the kernel.
To fix this, introduce xfd_set_state() to write xfd_state together
with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD.
Fixes: 672365477ae8 ("x86/fpu: Update XFD state where required")
Signed-off-by: Adamos Ttofari <attofari@amazon.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240322230439.456571-1-chang.seok.bae@intel.com
Closes: https://lore.kernel.org/lkml/20230511152818.13839-1-attofari@amazon.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Handle errors in mark_rodata_ro() and mark_initmem_nx()
- Make struct crash_mem available without CONFIG_CRASH_DUMP
Thanks to Christophe Leroy and Hari Bathini.
* tag 'powerpc-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kdump: Split KEXEC_CORE and CRASH_DUMP dependency
powerpc/kexec: split CONFIG_KEXEC_FILE and CONFIG_CRASH_DUMP
kexec/kdump: make struct crash_mem available without CONFIG_CRASH_DUMP
powerpc: Handle error in mark_rodata_ro() and mark_initmem_nx()
|
|
Pull ARM updates from Russell King:
- remove a misuse of kernel-doc comment
- use "Call trace:" for backtraces like other architectures
- implement copy_from_kernel_nofault_allowed() to fix a LKDTM test
- add a "cut here" line for prefetch aborts
- remove unnecessary Kconfing entry for FRAME_POINTER
- remove iwmmxy support for PJ4/PJ4B cores
- use bitfield helpers in ptrace to improve readabililty
- check if folio is reserved before flushing
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9359/1: flush: check if the folio is reserved for no-mapping addresses
ARM: 9354/1: ptrace: Use bitfield helpers
ARM: 9352/1: iwmmxt: Remove support for PJ4/PJ4B cores
ARM: 9353/1: remove unneeded entry for CONFIG_FRAME_POINTER
ARM: 9351/1: fault: Add "cut here" line for prefetch aborts
ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed()
ARM: 9349/1: unwind: Add missing "Call trace:" line
ARM: 9334/1: mm: init: remove misuse of kernel-doc comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more hardening updates from Kees Cook:
- CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck)
- Fix needless UTF-8 character in arch/Kconfig (Liu Song)
- Improve __counted_by warning message in LKDTM (Nathan Chancellor)
- Refactor DEFINE_FLEX() for default use of __counted_by
- Disable signed integer overflow sanitizer on GCC < 8
* tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/bugs: Improve warning message for compilers without counted_by support
overflow: Change DEFINE_FLEX to take __counted_by member
Revert "kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST"
arch/Kconfig: eliminate needless UTF-8 character in Kconfig help
ubsan: Disable signed integer overflow sanitizer on GCC < 8
|
|
The APIC address is registered twice. First during the early detection and
afterwards when actually scanning the table for APIC IDs. The APIC and
topology core warn about the second attempt.
Restrict it to the early detection call.
Fixes: 81287ad65da5 ("x86/apic: Sanitize APIC address setup")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.297774848@linutronix.de
|
|
If there is no local APIC enumerated and registered then the topology
bitmaps are empty. Therefore, topology_init_possible_cpus() will die with
a division by zero exception.
Prevent this by registering a fake APIC id to populate the topology
bitmap. This also allows to use all topology query interfaces
unconditionally. It does not affect the actual APIC code because either
the local APIC address was not registered or no local APIC could be
detected.
Fixes: f1f758a80516 ("x86/topology: Add a mechanism to track topology via APIC IDs")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.242709302@linutronix.de
|
|
The local APICs have not yet been enumerated so the logical ID evaluation
from the topology bitmaps does not work and would return an error code.
Skip the evaluation during the early boot CPUID evaluation and only apply
it on the final run.
Fixes: 380414be78bf ("x86/cpu/topology: Use topology logical mapping mechanism")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.186943142@linutronix.de
|
|
The boot sequence evaluates CPUID information twice:
1) During early boot
2) When finalizing the early setup right before
mitigations are selected and alternatives are patched.
In both cases the evaluation is stored in boot_cpu_data, but on UP the
copying of boot_cpu_data to the per CPU info of the boot CPU happens
between #1 and #2. So any update which happens in #2 is never propagated to
the per CPU info instance.
Consolidate the whole logic and copy boot_cpu_data right before applying
alternatives as that's the point where boot_cpu_data is in it's final
state and not supposed to change anymore.
This also removes the voodoo mb() from smp_prepare_cpus_common() which
had absolutely no purpose.
Fixes: 71eb4893cfaf ("x86/percpu: Cure per CPU madness on UP")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.127642785@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various vector-accelerated crypto routines
- Hibernation is now enabled for portable kernel builds
- mmap_rnd_bits_max is larger on systems with larger VAs
- Support for fast GUP
- Support for membarrier-based instruction cache synchronization
- Support for the Andes hart-level interrupt controller and PMU
- Some cleanups around unaligned access speed probing and Kconfig
settings
- Support for ACPI LPI and CPPC
- Various cleanus related to barriers
- A handful of fixes
* tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits)
riscv: Fix syscall wrapper for >word-size arguments
crypto: riscv - add vector crypto accelerated AES-CBC-CTS
crypto: riscv - parallelize AES-CBC decryption
riscv: Only flush the mm icache when setting an exec pte
riscv: Use kcalloc() instead of kzalloc()
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
ACPI: RISC-V: Add CPPC driver
ACPI: Enable ACPI_PROCESSOR for RISC-V
ACPI: RISC-V: Add LPI driver
cpuidle: RISC-V: Move few functions to arch/riscv
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add objtool support for LoongArch
- Add ORC stack unwinder support for LoongArch
- Add kernel livepatching support for LoongArch
- Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
- Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
- Some bug fixes and other small changes
* tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch/crypto: Clean up useless assignment operations
LoongArch: Define the __io_aw() hook as mmiowb()
LoongArch: Remove superfluous flush_dcache_page() definition
LoongArch: Move {dmw,tlb}_virt_to_page() definition to page.h
LoongArch: Change __my_cpu_offset definition to avoid mis-optimization
LoongArch: Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
LoongArch: Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
LoongArch: Add kernel livepatching support
LoongArch: Add ORC stack unwinder support
objtool: Check local label in read_unwind_hints()
objtool: Check local label in add_dead_ends()
objtool/LoongArch: Enable orc to be built
objtool/x86: Separate arch-specific and generic parts
objtool/LoongArch: Implement instruction decoder
objtool/LoongArch: Enable objtool to be built
|
|
Read from an unsafe address with copy_from_kernel_nofault() in
arch_adjust_kprobe_addr() because this function is used before checking
the address is in text or not. Syzcaller bot found a bug and reported
the case if user specifies inaccessible data area,
arch_adjust_kprobe_addr() will cause a kernel panic.
[ mingo: Clarified the comment. ]
Fixes: cc66bb914578 ("x86/ibt,kprobes: Cure sym+0 equals fentry woes")
Reported-by: Qiang Zhang <zzqq0103.hey@gmail.com>
Tested-by: Jinghao Jia <jinghao7@illinois.edu>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/171042945004.154897.2221804961882915806.stgit@devnote2
|
|
Since:
7ee18d677989 ("x86/power: Make restore_processor_context() sane")
kmemleak reports this issue:
unreferenced object 0xf68241e0 (size 32):
comm "swapper/0", pid 1, jiffies 4294668610 (age 68.432s)
hex dump (first 32 bytes):
00 cc cc cc 29 10 01 c0 00 00 00 00 00 00 00 00 ....)...........
00 42 82 f6 cc cc cc cc cc cc cc cc cc cc cc cc .B..............
backtrace:
[<461c1d50>] __kmem_cache_alloc_node+0x106/0x260
[<ea65e13b>] __kmalloc+0x54/0x160
[<c3858cd2>] msr_build_context.constprop.0+0x35/0x100
[<46635aff>] pm_check_save_msr+0x63/0x80
[<6b6bb938>] do_one_initcall+0x41/0x1f0
[<3f3add60>] kernel_init_freeable+0x199/0x1e8
[<3b538fde>] kernel_init+0x1a/0x110
[<938ae2b2>] ret_from_fork+0x1c/0x28
Which is a false positive.
Reproducer:
- Run rsync of whole kernel tree (multiple times if needed).
- start a kmemleak scan
- Note this is just an example: a lot of our internal tests hit these.
The root cause is similar to the fix in:
b0b592cf0836 x86/pm: Fix false positive kmemleak report in msr_build_context()
ie. the alignment within the packed struct saved_context
which has everything unaligned as there is only "u16 gs;" at start of
struct where in the past there were four u16 there thus aligning
everything afterwards. The issue is with the fact that Kmemleak only
searches for pointers that are aligned (see how pointers are scanned in
kmemleak.c) so when the struct members are not aligned it doesn't see
them.
Testing:
We run a lot of tests with our CI, and after applying this fix we do not
see any kmemleak issues any more whilst without it we see hundreds of
the above report. From a single, simple test run consisting of 416 individual test
cases on kernel 5.10 x86 with kmemleak enabled we got 20 failures due to this,
which is quite a lot. With this fix applied we get zero kmemleak related failures.
Fixes: 7ee18d677989 ("x86/power: Make restore_processor_context() sane")
Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240314142656.17699-1-anton@tuxera.com
|
|
crashkernel reservation failed on a Thinkpad t440s laptop recently.
Actually the memblock reservation succeeded, but later insert_resource()
failed.
Test steps:
kexec load -> /* make sure add crashkernel param eg. crashkernel=160M */
kexec reboot ->
dmesg|grep "crashkernel reserved";
crashkernel memory range like below reserved successfully:
0x00000000d0000000 - 0x00000000da000000
But no such "Crash kernel" region in /proc/iomem
The background story:
Currently the E820 code reserves setup_data regions for both the current
kernel and the kexec kernel, and it inserts them into the resources list.
Before the kexec kernel reboots nobody passes the old setup_data, and
kexec only passes fresh SETUP_EFI/SETUP_IMA/SETUP_RNG_SEED if needed.
Thus the old setup data memory is not used at all.
Due to old kernel updates the kexec e820 table as well so kexec kernel
sees them as E820_TYPE_RESERVED_KERN regions, and later the old setup_data
regions are inserted into resources list in the kexec kernel by
e820__reserve_resources().
Note, due to no setup_data is passed in for those old regions they are not
early reserved (by function early_reserve_memory), and the crashkernel
memblock reservation will just treat them as usable memory and it could
reserve the crashkernel region which overlaps with the old setup_data
regions. And just like the bug I noticed here, kdump insert_resource
failed because e820__reserve_resources has added the overlapped chunks
in /proc/iomem already.
Finally, looking at the code, the old setup_data regions are not used
at all as no setup_data is passed in by the kexec boot loader. Although
something like SETUP_PCI etc could be needed, kexec should pass
the info as new setup_data so that kexec kernel can take care of them.
This should be taken care of in other separate patches if needed.
Thus drop the useless buggy code here.
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Eric DeVolder <eric.devolder@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/Zf0T3HCG-790K-pZ@darkstar.users.ipa.redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Re-instate the CPUMASK_OFFSTACK option for arm64 when NR_CPUS > 256.
The bug that led to the initial revert was the cpufreq-dt code not
using zalloc_cpumask_var().
- Make the STARFIVE_STARLINK_PMU config option depend on 64BIT to
prevent compile-test failures on 32-bit architectures due to missing
writeq().
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf: starfive: fix 64-bit only COMPILE_TEST condition
ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Generate a list of built DTB files (arch/*/boot/dts/dtbs-list)
- Use more threads when building Debian packages in parallel
- Fix warnings shown during the RPM kernel package uninstallation
- Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to
Makefile
- Support GCC's -fmin-function-alignment flag
- Fix a null pointer dereference bug in modpost
- Add the DTB support to the RPM package
- Various fixes and cleanups in Kconfig
* tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits)
kconfig: tests: test dependency after shuffling choices
kconfig: tests: add a test for randconfig with dependent choices
kconfig: tests: support KCONFIG_SEED for the randconfig runner
kbuild: rpm-pkg: add dtb files in kernel rpm
kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig()
kconfig: check prompt for choice while parsing
kconfig: lxdialog: remove unused dialog colors
kconfig: lxdialog: fix button color for blackbg theme
modpost: fix null pointer dereference
kbuild: remove GCC's default -Wpacked-bitfield-compat flag
kbuild: unexport abs_srctree and abs_objtree
kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1
kconfig: remove named choice support
kconfig: use linked list in get_symbol_str() to iterate over menus
kconfig: link menus to a symbol
kbuild: fix inconsistent indentation in top Makefile
kbuild: Use -fmin-function-alignment when available
alpha: merge two entries for CONFIG_ALPHA_GAMMA
alpha: merge two entries for CONFIG_ALPHA_EV4
kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and a number of other driver
subsystem updates for 6.9-rc1. Included in here are:
- IIO driver updates, loads of new ones and evolution of existing ones
- coresight driver updates
- const cleanups for many driver subsystems
- speakup driver additions
- platform remove callback void cleanups
- mei driver updates
- mhi driver updates
- cdx driver updates for MSI interrupt handling
- nvmem driver updates
- other smaller driver updates and cleanups, full details in the
shortlog
All of these have been in linux-next for a long time with no reported
issue, other than a build warning for the speakup driver"
The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.
Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/
* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
binder: remove redundant variable page_addr
uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
uio_pruss: UIO_MEM_DMA_COHERENT conversion
cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
uio: introduce UIO_MEM_DMA_COHERENT type
cdx: add MSI support for CDX bus
pps: use cflags-y instead of EXTRA_CFLAGS
speakup: Add /dev/synthu device
speakup: Fix 8bit characters from direct synth
parport: sunbpp: Convert to platform remove callback returning void
parport: amiga: Convert to platform remove callback returning void
char: xillybus: Convert to platform remove callback returning void
vmw_balloon: change maintainership
MAINTAINERS: change the maintainer for hpilo driver
char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
hpet: remove hpets::hp_clocksource
platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
char: xilinx_hwicap: drop casting to void in dev_set_drvdata
greybus: move is_gb_* functions out of greybus.h
greybus: Remove usage of the deprecated ida_simple_xx() API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY/Serial driver updates and cleanups for
6.9-rc1. Included in here are:
- more tty cleanups from Jiri
- loads of 8250 driver cleanups from Andy
- max310x driver updates
- samsung serial driver updates
- uart_prepare_sysrq_char() updates for many drivers
- platform driver remove callback void cleanups
- stm32 driver updates
- other small tty/serial driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
dt-bindings: serial: stm32: add power-domains property
serial: 8250_dw: Replace ACPI device check by a quirk
serial: Lock console when calling into driver before registration
serial: 8250_uniphier: Switch to use uart_read_port_properties()
serial: 8250_tegra: Switch to use uart_read_port_properties()
serial: 8250_pxa: Switch to use uart_read_port_properties()
serial: 8250_omap: Switch to use uart_read_port_properties()
serial: 8250_of: Switch to use uart_read_port_properties()
serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
serial: 8250_ingenic: Switch to use uart_read_port_properties()
serial: 8250_dw: Switch to use uart_read_port_properties()
serial: 8250_bcm7271: Switch to use uart_read_port_properties()
serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
serial: port: Introduce a common helper to read properties
serial: core: Add UPIO_UNKNOWN constant for unknown port type
serial: core: Move struct uart_port::quirks closer to possible values
serial: sh-sci: Call sci_serial_{in,out}() directly
serial: core: only stop transmit when HW fifo is empty
serial: pch: Use uart_prepare_sysrq_char().
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
of tiny changes and forward progress to support new hardware and
better support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues"
* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
phy: tegra: xusb: Add API to retrieve the port number of phy
USB: gadget: pxa27x_udc: Remove unused of_gpio.h
usb: gadget/snps_udc_plat: Remove unused of_gpio.h
usb: ohci-pxa27x: Remove unused of_gpio.h
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
usb: Clarify expected behavior of dev_bin_attrs_are_visible()
xhci: Allow RPM on the USB controller (1022:43f7) by default
usb: isp1760: remove SLAB_MEM_SPREAD flag usage
usb: misc: onboard_hub: use pointer consistently in the probe function
usb: gadget: fsl: Increase size of name buffer for endpoints
usb: gadget: fsl: Add of device table to enable module autoloading
usb: typec: tcpm: add support to set tcpc connector orientatition
usb: typec: tcpci: add generic tcpci fallback compatible
dt-bindings: usb: typec-tcpci: add tcpci fallback binding
usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
usb: core: Set connect_type of ports based on DT node
dt-bindings: usb: Add downstream facing ports to realtek binding
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Two patches by Ricardo B. Marliere make two instances of struct
bus_type in the interrupt controller driver and the DMA sysfs
interface const since the driver core in the kernel is now able to
handle that.
A third patch by Artur Rojek enforces internal linkage for the
function setup_hd64461() in order to fix the build of hp6xx_defconfig
with -Werror=missing-prototypes"
* tag 'sh-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: hd64461: Make setup_hd64461() static
sh: intc: Make intc_subsys const
sh: dma-sysfs: Make dma_subsys const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Use Hyper-V entropy to seed guest random number generator (Michael
Kelley)
- Convert to platform remove callback returning void for vmbus (Uwe
Kleine-König)
- Introduce hv_get_hypervisor_version function (Nuno Das Neves)
- Rename some HV_REGISTER_* defines for consistency (Nuno Das Neves)
- Change prefix of generic HV_REGISTER_* MSRs to HV_MSR_* (Nuno Das
Neves)
- Cosmetic changes for hv_spinlock.c (Purna Pavan Chandra Aekkaladevi)
- Use per cpu initial stack for vtl context (Saurabh Sengar)
* tag 'hyperv-next-signed-20240320' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Use Hyper-V entropy to seed guest random number generator
x86/hyperv: Cosmetic changes for hv_spinlock.c
hyperv-tlfs: Rename some HV_REGISTER_* defines for consistency
hv: vmbus: Convert to platform remove callback returning void
mshyperv: Introduce hv_get_hypervisor_version function
x86/hyperv: Use per cpu initial stack for vtl context
hyperv-tlfs: Change prefix of generic HV_REGISTER_* MSRs to HV_MSR_*
|
|
Enforce internal linkage for setup_hd64461().
This fixes the following error:
arch/sh/cchips/hd6446x/hd64461.c:75:12: error: no previous prototype for 'setup_hd64461' [-Werror=missing-prototypes]
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20240211193451.106795-1-contact@artur-rojek.eu
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the
generated insn reverses byte order for both high and low 32-bit words,
resuling in an incorrect swap as indicated by the jit test:
[ 9757.262607] test_bpf: #312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS
[ 9757.264435] test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times)
[ 9757.266260] test_bpf: #314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS
[ 9757.268000] test_bpf: #315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS
[ 9757.269686] test_bpf: #316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS
[ 9757.271380] test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times)
[ 9757.273022] test_bpf: #318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS
[ 9757.274721] test_bpf: #319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS
Fix this by forcing 32bit variant of rev32.
Fixes: 1104247f3f979 ("bpf, arm64: Support unconditional bswap")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Tested-by: Puranjay Mohan <puranjay12@gmail.com>
Acked-by: Puranjay Mohan <puranjay12@gmail.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Message-ID: <20240321081809.158803-1-asavkov@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Kconfig emits a warning for the following command:
$ make ARCH=x86_64 tinyconfig
...
.config:1380:warning: override: UNWINDER_GUESS changes choice state
When X86_64=y, the unwinder is exclusively selected from the following
three options:
- UNWINDER_ORC
- UNWINDER_FRAME_POINTER
- UNWINDER_GUESS
However, arch/x86/configs/tiny.config only specifies the values of the
last two. UNWINDER_ORC must be explicitly disabled.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240320154313.612342-1-masahiroy@kernel.org
|
|
The current syscall wrapper macros break 64-bit arguments on
rv32 because they only guarantee the first N input registers are
passed to syscalls that accept N arguments. According to the
calling convention, values twice the word size reside in register
pairs and as a result, syscall arguments don't always have a
direct register mapping on rv32.
Instead of using `__MAP(x,__SC_LONG,__VA_ARGS__)` to declare the
type of the `__se(_compat)_sys_*` functions on rv32, change the
function declarations to accept `ulong` arguments and alias them
to the actual syscall implementations, similarly to the existing
macros in include/linux/syscalls.h. This matches previous
behavior and ensures registers are passed to syscalls as-is, no
matter which argument types they expect.
Fixes: 08d0ce30e0e4 ("riscv: Implement syscall wrappers")
Reported-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20240311193143.2981310-2-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Eric Chan <ericchancf@google.com> says:
This series makes barrier-related macro more neat and clear.
This is a follow-up to [0-3], change to multiple patches,
for readability, create new message thread.
[0](v1/v2) https://lore.kernel.org/lkml/20240209125048.4078639-1-ericchancf@google.com/
[1] (v3) https://lore.kernel.org/lkml/20240213142856.2416073-1-ericchancf@google.com/
[2] (v4) https://lore.kernel.org/lkml/20240213200923.2547570-1-ericchancf@google.com/
[4] (v5) https://lore.kernel.org/lkml/20240213223810.2595804-1-ericchancf@google.com/
* b4-shazam-merge:
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
Link: https://lore.kernel.org/r/20240217131206.3667544-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
