| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull force_sig() argument change from Eric Biederman:
"A source of error over the years has been that force_sig has taken a
task parameter when it is only safe to use force_sig with the current
task.
The force_sig function is built for delivering synchronous signals
such as SIGSEGV where the userspace application caused a synchronous
fault (such as a page fault) and the kernel responded with a signal.
Because the name force_sig does not make this clear, and because the
force_sig takes a task parameter the function force_sig has been
abused for sending other kinds of signals over the years. Slowly those
have been fixed when the oopses have been tracked down.
This set of changes fixes the remaining abusers of force_sig and
carefully rips out the task parameter from force_sig and friends
making this kind of error almost impossible in the future"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
signal: Remove the signal number and task parameters from force_sig_info
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Generate the siginfo in force_sig
signal: Move the computation of force into send_signal and correct it.
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Remove the task parameter from force_sig_fault
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Explicitly call force_sig_fault on current
signal/unicore32: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from ptrace_break
signal/nds32: Remove tsk parameter from send_sigtrap
signal/riscv: Remove tsk parameter from do_trap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/um: Remove task parameter from send_sigtrap
signal/x86: Remove task parameter from send_sigtrap
signal: Remove task parameter from force_sig_mceerr
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sigsegv
...
|
|
Even if vsyscall=none, user page faults on the vsyscall page are reported
as though the PROT bit in the error code was set. Add a comment explaining
why this is probably okay and display the value in the test case.
While at it, explain why the behavior is correct with respect to PKRU.
Modify also the selftest to print the odd error code so that there is a
way to demonstrate the odd behaviour.
If anyone really cares about more accurate emulation, the behaviour could
be changed. But that needs a real good justification.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/75c91855fd850649ace162eec5495a1354221aaa.1561610354.git.luto@kernel.org
|
|
Just segfaulting the application when it tries to read the vsyscall page in
xonly mode is not helpful for those who need to debug it.
Emit a hint.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jann Horn <jannh@google.com>
Link: https://lkml.kernel.org/r/8016afffe0eab497be32017ad7f6f7030dc3ba66.1561610354.git.luto@kernel.org
|
|
Stephen Rothwell <sfr@canb.auug.org.au> reported:
> After merging the userns tree, today's linux-next build (i386 defconfig)
> produced this warning:
>
> arch/x86/mm/fault.c: In function 'do_sigbus':
> arch/x86/mm/fault.c:1017:22: warning: unused variable 'tsk' [-Wunused-variable]
> struct task_struct *tsk = current;
> ^~~
>
> Introduced by commit
>
> 351b6825b3a9 ("signal: Explicitly call force_sig_fault on current")
>
> The remaining used of "tsk" are protected by CONFIG_MEMORY_FAILURE.
So do the obvious thing and move tsk inside of CONFIG_MEMORY_FAILURE
to prevent introducing new warnings into the build.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
As synchronous exceptions really only make sense against the current
task (otherwise how are you synchronous) remove the task parameter
from from force_sig_fault to make it explicit that is what is going
on.
The two known exceptions that deliver a synchronous exception to a
stopped ptraced task have already been changed to
force_sig_fault_to_task.
The callers have been changed with the following emacs regular expression
(with obvious variations on the architectures that take more arguments)
to avoid typos:
force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)]
->
force_sig_fault(\1,\2,\3)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Update the calls of force_sig_fault that pass in a variable that is
set to current earlier to explicitly use current.
This is to make the next change that removes the task parameter
from force_sig_fault easier to verify.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
All of the callers pass current into force_sig_mceer so remove the
task parameter to make this obvious.
This also makes it clear that force_sig_mceerr passes current
into force_sig_info.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"The changes in here are:
- text_poke() fixes and an extensive set of executability lockdowns,
to (hopefully) eliminate the last residual circumstances under
which we are using W|X mappings even temporarily on x86 kernels.
This required a broad range of surgery in text patching facilities,
module loading, trampoline handling and other bits.
- tweak page fault messages to be more informative and more
structured.
- remove DISCONTIGMEM support on x86-32 and make SPARSEMEM the
default.
- reduce KASLR granularity on 5-level paging kernels from 512 GB to
1 GB.
- misc other changes and updates"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/mm: Initialize PGD cache during mm initialization
x86/alternatives: Add comment about module removal races
x86/kprobes: Use vmalloc special flag
x86/ftrace: Use vmalloc special flag
bpf: Use vmalloc special flag
modules: Use vmalloc special flag
mm/vmalloc: Add flag for freeing of special permsissions
mm/hibernation: Make hibernation handle unmapped pages
x86/mm/cpa: Add set_direct_map_*() functions
x86/alternatives: Remove the return value of text_poke_*()
x86/jump-label: Remove support for custom text poker
x86/modules: Avoid breaking W^X while loading modules
x86/kprobes: Set instruction page as executable
x86/ftrace: Set trampoline pages as executable
x86/kgdb: Avoid redundant comparison of patched code
x86/alternatives: Use temporary mm for text poking
x86/alternatives: Initialize temporary mm for patching
fork: Provide a function for copying init_mm
uprobes: Initialize uprobes earlier
x86/mm: Save debug registers when loading a temporary mm
...
|
|
In-NMI warnings have been added to vmalloc_fault() via:
ebc8827f75 ("x86: Barf when vmalloc and kmemcheck faults happen in NMI")
back in the time when our NMI entry code could not cope with nested NMIs.
These days, it's perfectly fine to take a fault in NMI context and we
don't have to care about the fact that IRET from the fault handler might
cause NMI nesting.
This warning has already been removed from 32-bit implementation of
vmalloc_fault() in:
6863ea0cda8 ("x86/mm: Remove in_nmi() warning from vmalloc_fault()")
but the 64-bit version was omitted.
Remove the bogus warning also from 64-bit implementation of vmalloc_fault().
Reported-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 6863ea0cda8 ("x86/mm: Remove in_nmi() warning from vmalloc_fault()")
Link: http://lkml.kernel.org/r/nycvar.YFH.7.76.1904240902280.9803@cbobk.fhfr.pm
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
So we are going to be staring at those in the next years, let's make
them more succinct. In particular:
- change "address = " to "address: "
- "-privileged" reads funny. It should be simply "kernel" or "user"
- "from kernel code" reads funny too. "kernel mode" or "user mode" is
more natural.
An actual example says more than 1000 words, of course:
[ 0.248370] BUG: kernel NULL pointer dereference, address: 00000000000005b8
[ 0.249120] #PF: supervisor write access in kernel mode
[ 0.249717] #PF: error_code(0x0002) - not-present page
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@linux.intel.com
Cc: luto@kernel.org
Cc: riel@surriel.com
Cc: sean.j.christopherson@intel.com
Cc: yu-cheng.yu@intel.com
Link: http://lkml.kernel.org/r/20190421183524.GC6048@zn.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Linus pointed out that deciphering the raw #PF error code and printing
a more human readable message are two different things, and also that
printing the negative cases is mostly just noise[1]. For example, the
USER bit doesn't mean the fault originated in user code and stating
that an oops wasn't due to a protection keys violation isn't interesting
since an oops on a keys violation is a one-in-a-million scenario.
Remove the per-bit decoding of the error code and instead print:
- the raw error code
- why the fault occurred
- the effective privilege level of the access
- the type of access
- whether the fault originated in user code or kernel code
This provides the user with the information needed to triage 99.9% of
oopses without polluting the log with useless information or conflating
the error_code with the CPL.
Sample output:
BUG: kernel NULL pointer dereference, address = 0000000000000008
#PF: supervisor-privileged instruction fetch from kernel code
#PF: error_code(0x0010) - not-present page
BUG: unable to handle page fault for address = ffffbeef00000000
#PF: supervisor-privileged instruction fetch from kernel code
#PF: error_code(0x0010) - not-present page
BUG: unable to handle page fault for address = ffffc90000230000
#PF: supervisor-privileged write access from kernel code
#PF: error_code(0x000b) - reserved bit violation
[1] https://lkml.kernel.org/r/CAHk-=whk_fsnxVMvF1T2fFCaP2WrvSybABrLQCWLJyCvHw6NKA@mail.gmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20181221213657.27628-3-sean.j.christopherson@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Reword the NULL pointer dereference case to simply state that a NULL
pointer was dereferenced, i.e. drop "unable to handle" as that implies
that there are instances where the kernel actual does handle NULL
pointer dereferences, which is not true barring funky exception fixup.
For the non-NULL case, replace "kernel paging request" with "page fault"
as the kernel can technically oops on faults that originated in user
code. Dropping "kernel" also allows future patches to provide detailed
information on where the fault occurred, e.g. user vs. kernel, without
conflicting with the initial BUG message.
In both cases, replace "at address=" with wording more appropriate to
the oops, as "at" may be interpreted as stating that the address is the
RIP of the instruction that faulted.
Last, and probably least, further qualify the NULL-pointer path by
checking that the fault actually originated in kernel code. It's
technically possible for userspace to map address 0, and not printing
a super specific message is the least of our worries if the kernel does
manage to oops on an actual NULL pointer dereference from userspace.
Before:
BUG: unable to handle kernel NULL pointer dereference at ffffbeef00000000
BUG: unable to handle kernel paging request at ffffbeef00000000
After:
BUG: kernel NULL pointer dereference, address = 0000000000000008
BUG: unable to handle page fault for address = ffffbeef00000000
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20181221213657.27628-2-sean.j.christopherson@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The orig_ist[] array is a shadow copy of the IST array in the TSS. The
reason why it exists is that older kernels used two TSS variants with
different pointers into the debug stack. orig_ist[] contains the real
starting points.
There is no point anymore to do so because the same information can be
retrieved using the base address of the cpu entry area mapping and the
offsets of the various exception stacks.
No functional change. Preparation for removing orig_ist.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190414160144.784487230@linutronix.de
|
|
The defines for the exception stack (IST) array in the TSS are using the
SDM convention IST1 - IST7. That causes all sorts of code to subtract 1 for
array indices related to IST. That's confusing at best and does not provide
any value.
Make the indices zero based and fixup the usage sites. The only code which
needs to adjust the 0 based index is the interrupt descriptor setup which
needs to add 1 now.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Chang S. Bae" <chang.seok.bae@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: linux-doc@vger.kernel.org
Cc: Nicolai Stange <nstange@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190414160144.331772825@linutronix.de
|
|
Page fault handlers are supposed to return VM_FAULT codes, but some
drivers/file systems mistakenly return error numbers. Now that all
drivers/file systems have been converted to use the vm_fault_t return
type, change the type definition to no longer be compatible with 'int'.
By making it an unsigned int, the function prototype becomes
incompatible with a function which returns int. Sparse will detect any
attempts to return a value which is not a VM_FAULT code.
VM_FAULT_SET_HINDEX and VM_FAULT_GET_HINDEX values are changed to avoid
conflict with other VM_FAULT codes.
[jrdr.linux@gmail.com: fix warnings]
Link: http://lkml.kernel.org/r/20190109183742.GA24326@jordon-HP-15-Notebook-PC
Link: http://lkml.kernel.org/r/20190108183041.GA12137@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
show_ldttss() shifts desc.base2 by 24 bit, but base2 is 8 bits of a
bitfield in a u16.
Due to the really great idea of integer promotion in C99 base2 is promoted
to an int, because that's the standard defined behaviour when all values
which can be represented by base2 fit into an int.
Now if bit 7 is set in desc.base2 the result of the shift left by 24 makes
the resulting integer negative and the following conversion to unsigned
long legitmately sign extends first causing the upper bits 32 bits to be
set in the result.
Fix this by casting desc.base2 to unsigned long before the shift.
Detected by CoverityScan, CID#1475635 ("Unintended sign extension")
[ tglx: Reworded the changelog a bit as I actually had to lookup
the standard (again) to decode the original one. ]
Fixes: a1a371c468f7 ("x86/fault: Decode page fault OOPSes better")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: kernel-janitors@vger.kernel.org
Link: https://lkml.kernel.org/r/20181222191116.21831-1-colin.king@canonical.com
|
|
- Make the oops messages a bit less scary (don't mention 'HW errors')
- Turn 'PROT USER' (which is visually easily confused with PROT_USER)
into individual bit descriptors: "[PROT] [USER]".
This also makes "[normal kernel read fault]" more apparent.
- De-abbreviate variables to make the code easier to read
- Use vertical alignment where appropriate.
- Add comment about string size limits and the helper function.
- Remove unnecessary line breaks.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
One of Linus' favorite hobbies seems to be looking at OOPSes and
decoding the error code in his head. This is not one of my favorite
hobbies :)
Teach the page fault OOPS hander to decode the error code. If it's
a !USER fault from user mode, print an explicit note to that effect
and print out the addresses of various tables that might cause such
an error.
With this patch applied, if I intentionally point the LDT at 0x0 and
run the x86 selftests, I get:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
HW error: normal kernel read fault
This was a system access from user code
IDT: 0xfffffe0000000000 (limit=0xfff) GDT: 0xfffffe0000001000 (limit=0x7f)
LDTR: 0x50 -- base=0x0 limit=0xfff7
TR: 0x40 -- base=0xfffffe0000003000 limit=0x206f
PGD 800000000456e067 P4D 800000000456e067 PUD 4623067 PMD 0
SMP PTI
CPU: 0 PID: 153 Comm: ldt_gdt_64 Not tainted 4.19.0+ #1317
Hardware name: ...
RIP: 0033:0x401454
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/11212acb25980cd1b3030875cd9502414fbb214d.1542841400.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This avoids a situation in which we attempt to apply various fixups
that are not intended to handle implicit supervisor accesses from
user mode if we screw up in a way that causes this type of fault.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/9999f151d72ff352265f3274c5ab3a4105090f49.1542841400.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
All of the fault handling code now corrently checks user_mode(regs)
as needed, and nothing depends on the X86_PF_USER bit being munged.
Get rid of the sw_error code and use hw_error_code everywhere.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/078f5b8ae6e8c79ff8ee7345b5c476c45003e5ac.1542841400.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The fault handling code sets the cr2, trap_nr, and error_code fields
in thread_struct before OOPSing. No one reads those fields during
an OOPS, so remove the code to set them.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/d418022aa0fad9cb40467aa7acaf4e95be50ee96.1542667307.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The error code in a page fault on a kernel address indicates
whether that address is mapped, which should not be revealed in a signal.
The normal code path for a page fault on a kernel address sanitizes the bit,
but the paths for vsyscall emulation and SIGBUS do not. Both are
harmless, but for subtle reasons. SIGBUS is never sent for a kernel
address, and vsyscall emulation will never fault on a kernel address
per se because it will fail an access_ok() check instead.
Make the code more robust by adding a helper that sets the relevant
fields and sanitizing the error code in the helper. This also
cleans up the code -- we had three copies of roughly the same thing.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/b31159bd55bd0c4fa061a20dfd6c429c094bebaa.1542667307.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
__bad_area_nosemaphore() currently checks the X86_PF_USER bit in the
error code to decide whether to send a signal or to treat the fault
as a kernel error. This can cause somewhat erratic behavior. The
straightforward cases where the CPL agrees with the hardware USER
bit are all correct, but the other cases are confusing.
- A user instruction accessing a kernel address with supervisor
privilege (e.g. a descriptor table access failed). The USER bit
will be clear, and we OOPS. This is correct, because it indicates
a kernel bug, not a user error.
- A user instruction accessing a user address with supervisor
privilege (e.g. a descriptor table was incorrectly pointing at
user memory). __bad_area_nosemaphore() will be passed a modified
error code with the user bit set, and we will send a signal.
Sending the signal will work (because the regs and the entry
frame genuinely come from user mode), but we really ought to
OOPS, as this event indicates a severe kernel bug.
- A kernel instruction with user privilege (i.e. WRUSS). This
should OOPS or get fixed up. The current code would instead try
send a signal and malfunction.
Change the logic: a signal should be sent if the faulting context is
user mode *and* the access has user privilege. Otherwise it's
either a kernel mode fault or a failed implicit access, either of
which should end up in no_context().
Note to -stable maintainers: don't backport this unless you backport
CET. The bug it fixes is unobservable in current kernels unless
something is extremely wrong.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/10e509c43893170e262e82027ea399130ae81159.1542667307.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently, if a user program somehow triggers an implicit supervisor
access to a user address (e.g. if the kernel somehow sets LDTR to a
user address), it will be incorrectly detected as a SMAP violation
if AC is clear and SMAP is enabled. This is incorrect -- the error
has nothing to do with SMAP. Fix the condition so that only
accesses with the hardware USER bit set are diagnosed as SMAP
violations.
With the logic fixed, an implicit supervisor access to a user address
will hit the code lower in the function that is intended to handle it
even if SMAP is enabled. That logic is still a bit buggy, and later
patches will clean it up.
I *think* this code is still correct for WRUSS, and I've added a
comment to that effect.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/d1d1b2e66ef31f884dba172084486ea9423ddcdb.1542667307.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
smap_violation() has a single caller, and the contents are a bit
nonsensical. I'm going to fix it, but first let's fold it into its
caller for ease of comprehension.
In this particular case, the user_mode(regs) check is incorrect --
it will cause false positives in the case of a user-initiated
kernel-privileged access.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/806c366f6ca861152398ce2c01744d59d9aceb6d.1542667307.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add X86_FEATURE_SMAP to the disabled features mask as appropriate
and use cpu_feature_enabled() in the fault code. This lets us get
rid of a redundant IS_ENABLED(CONFIG_X86_SMAP).
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/fe93332eded3d702f0b0b4cf83928d6830739ba3.1542667307.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The fault-handling code that takes mmap_sem needs to avoid a
deadlock that could occur if the kernel took a bad (OOPS-worthy)
page fault on a user address while holding mmap_sem. This can only
happen if the faulting instruction was in the kernel
(i.e. user_mode(regs)). Rather than checking the sw_error_code
(which will have the USER bit set if the fault was a USER-permission
access *or* if user_mode(regs)), just check user_mode(regs)
directly.
The old code would have malfunctioned if the kernel executed a bogus
WRUSS instruction while holding mmap_sem. Fortunately, that is
extremely unlikely in current kernels, which don't use WRUSS.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/4b89b542e8ceba9bd6abde2f386afed6d99244a9.1542667307.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The current x86 page fault handler allows stack access below the stack
pointer if it is no more than 64k+256 bytes. Any access beyond the 64k+
limit will cause a segmentation fault.
The gcc -fstack-check option generates code to probe the stack for
large stack allocation to see if the stack is accessible. The newer gcc
does that while updating the %rsp simultaneously. Older gcc's like gcc4
doesn't do that. As a result, an application compiled with an old gcc
and the -fstack-check option may fail to start at all:
$ cat test.c
int main() {
char tmp[1024*128];
printf("### ok\n");
return 0;
}
$ gcc -fstack-check -g -o test test.c
$ ./test
Segmentation fault
The old binary was working in older kernels where expand_stack() was
somehow called before the check. But it is not working in newer kernels.
Besides, the 64k+ limit check is kind of crude and will not catch a
lot of mistakes that userspace applications may be misbehaving anyway.
I think the kernel isn't the right place for this kind of tests. We
should leave it to userspace instrumentation tools to perform them.
The 64k+ limit check is now removed to just let expand_stack() decide
if a segmentation fault should happen, when the RLIMIT_STACK limit is
exceeded, for example.
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1541535149-31963-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo updates from Eric Biederman:
"I have been slowly sorting out siginfo and this is the culmination of
that work.
The primary result is in several ways the signal infrastructure has
been made less error prone. The code has been updated so that manually
specifying SEND_SIG_FORCED is never necessary. The conversion to the
new siginfo sending functions is now complete, which makes it
difficult to send a signal without filling in the proper siginfo
fields.
At the tail end of the patchset comes the optimization of decreasing
the size of struct siginfo in the kernel from 128 bytes to about 48
bytes on 64bit. The fundamental observation that enables this is by
definition none of the known ways to use struct siginfo uses the extra
bytes.
This comes at the cost of a small user space observable difference.
For the rare case of siginfo being injected into the kernel only what
can be copied into kernel_siginfo is delivered to the destination, the
rest of the bytes are set to 0. For cases where the signal and the
si_code are known this is safe, because we know those bytes are not
used. For cases where the signal and si_code combination is unknown
the bits that won't fit into struct kernel_siginfo are tested to
verify they are zero, and the send fails if they are not.
I made an extensive search through userspace code and I could not find
anything that would break because of the above change. If it turns out
I did break something it will take just the revert of a single change
to restore kernel_siginfo to the same size as userspace siginfo.
Testing did reveal dependencies on preferring the signo passed to
sigqueueinfo over si->signo, so bit the bullet and added the
complexity necessary to handle that case.
Testing also revealed bad things can happen if a negative signal
number is passed into the system calls. Something no sane application
will do but something a malicious program or a fuzzer might do. So I
have fixed the code that performs the bounds checks to ensure negative
signal numbers are handled"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits)
signal: Guard against negative signal numbers in copy_siginfo_from_user32
signal: Guard against negative signal numbers in copy_siginfo_from_user
signal: In sigqueueinfo prefer sig not si_signo
signal: Use a smaller struct siginfo in the kernel
signal: Distinguish between kernel_siginfo and siginfo
signal: Introduce copy_siginfo_from_user and use it's return value
signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE
signal: Fail sigqueueinfo if si_signo != sig
signal/sparc: Move EMT_TAGOVF into the generic siginfo.h
signal/unicore32: Use force_sig_fault where appropriate
signal/unicore32: Generate siginfo in ucs32_notify_die
signal/unicore32: Use send_sig_fault where appropriate
signal/arc: Use force_sig_fault where appropriate
signal/arc: Push siginfo generation into unhandled_exception
signal/ia64: Use force_sig_fault where appropriate
signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn
signal/ia64: Use the generic force_sigsegv in setup_frame
signal/arm/kvm: Use send_sig_mceerr
signal/arm: Use send_sig_fault where appropriate
signal/arm: Use force_sig_fault where appropriate
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"Lots of changes in this cycle:
- Lots of CPA (change page attribute) optimizations and related
cleanups (Thomas Gleixner, Peter Zijstra)
- Make lazy TLB mode even lazier (Rik van Riel)
- Fault handler cleanups and improvements (Dave Hansen)
- kdump, vmcore: Enable kdumping encrypted memory with AMD SME
enabled (Lianbo Jiang)
- Clean up VM layout documentation (Baoquan He, Ingo Molnar)
- ... plus misc other fixes and enhancements"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
x86/stackprotector: Remove the call to boot_init_stack_canary() from cpu_startup_entry()
x86/mm: Kill stray kernel fault handling comment
x86/mm: Do not warn about PCI BIOS W+X mappings
resource: Clean it up a bit
resource: Fix find_next_iomem_res() iteration issue
resource: Include resource end in walk_*() interfaces
x86/kexec: Correct KEXEC_BACKUP_SRC_END off-by-one error
x86/mm: Remove spurious fault pkey check
x86/mm/vsyscall: Consider vsyscall page part of user address space
x86/mm: Add vsyscall address helper
x86/mm: Fix exception table comments
x86/mm: Add clarifying comments for user addr space
x86/mm: Break out user address space handling
x86/mm: Break out kernel address space handling
x86/mm: Clarify hardware vs. software "error_code"
x86/mm/tlb: Make lazy TLB mode lazier
x86/mm/tlb: Add freed_tables element to flush_tlb_info
x86/mm/tlb: Add freed_tables argument to flush_tlb_mm_range
smp,cpumask: introduce on_each_cpu_cond_mask
smp: use __cpumask_set_cpu in on_each_cpu_cond
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking and misc x86 updates from Ingo Molnar:
"Lots of changes in this cycle - in part because locking/core attracted
a number of related x86 low level work which was easier to handle in a
single tree:
- Linux Kernel Memory Consistency Model updates (Alan Stern, Paul E.
McKenney, Andrea Parri)
- lockdep scalability improvements and micro-optimizations (Waiman
Long)
- rwsem improvements (Waiman Long)
- spinlock micro-optimization (Matthew Wilcox)
- qspinlocks: Provide a liveness guarantee (more fairness) on x86.
(Peter Zijlstra)
- Add support for relative references in jump tables on arm64, x86
and s390 to optimize jump labels (Ard Biesheuvel, Heiko Carstens)
- Be a lot less permissive on weird (kernel address) uaccess faults
on x86: BUG() when uaccess helpers fault on kernel addresses (Jann
Horn)
- macrofy x86 asm statements to un-confuse the GCC inliner. (Nadav
Amit)
- ... and a handful of other smaller changes as well"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
locking/lockdep: Make global debug_locks* variables read-mostly
locking/lockdep: Fix debug_locks off performance problem
locking/pvqspinlock: Extend node size when pvqspinlock is configured
locking/qspinlock_stat: Count instances of nested lock slowpaths
locking/qspinlock, x86: Provide liveness guarantee
x86/asm: 'Simplify' GEN_*_RMWcc() macros
locking/qspinlock: Rework some comments
locking/qspinlock: Re-order code
locking/lockdep: Remove duplicated 'lock_class_ops' percpu array
x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y
futex: Replace spin_is_locked() with lockdep
locking/lockdep: Make class->ops a percpu counter and move it under CONFIG_DEBUG_LOCKDEP=y
x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs
x86/cpufeature: Macrofy inline assembly code to work around GCC inlining bugs
x86/extable: Macrofy inline assembly code to work around GCC inlining bugs
x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops
x86/bug: Macrofy the BUG table section handling, to work around GCC inlining bugs
x86/alternatives: Macrofy lock prefixes to work around GCC inlining bugs
x86/refcount: Work around GCC inlining bug
x86/objtool: Use asm macros to work around GCC inlining bugs
...
|
|
I originally had matching user and kernel comments, but the kernel
one got improved. Some errant conflict resolution kicked the commment
somewhere wrong. Kill it.
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: aa37c51b94 ("x86/mm: Break out user address space handling")
Link: http://lkml.kernel.org/r/20181019140842.12F929FA@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Spurious faults only ever occur in the kernel's address space. They
are also constrained specifically to faults with one of these error codes:
X86_PF_WRITE | X86_PF_PROT
X86_PF_INSTR | X86_PF_PROT
So, it's never even possible to reach spurious_kernel_fault_check() with
X86_PF_PK set.
In addition, the kernel's address space never has pages with user-mode
protections. Protection Keys are only enforced on pages with user-mode
protection.
This gives us lots of reasons to not check for protection keys in our
sprurious kernel fault handling.
But, let's also add some warnings to ensure that these assumptions about
protection keys hold true.
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180928160231.243A0D6A@viggo.jf.intel.com
|
|
The vsyscall page is weird. It is in what is traditionally part of
the kernel address space. But, it has user permissions and we handle
faults on it like we would on a user page: interrupts on.
Right now, we handle vsyscall emulation in the "bad_area" code, which
is used for both user-address-space and kernel-address-space faults.
Move the handling to the user-address-space code *only* and ensure we
get there by "excluding" the vsyscall page from the kernel address
space via a check in fault_in_kernel_space().
Since the fault_in_kernel_space() check is used on 32-bit, also add a
64-bit check to make it clear we only use this path on 64-bit. Also
move the unlikely() to be in is_vsyscall_vaddr() itself.
This helps clean up the kernel fault handling path by removing a case
that can happen in normal[1] operation. (Yeah, yeah, we can argue
about the vsyscall page being "normal" or not.) This also makes
sanity checks easier, like the "we never take pkey faults in the
kernel address space" check in the next patch.
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180928160230.6E9336EE@viggo.jf.intel.com
|
|
We will shortly be using this check in two locations. Put it in
a helper before we do so.
Let's also insert PAGE_MASK instead of the open-coded ~0xfff.
It is easier to read and also more obviously correct considering
the implicit type conversion that has to happen when it is not
an implicit 'unsigned long'.
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180928160228.C593509B@viggo.jf.intel.com
|
|
The comments here are wrong. They are too absolute about where
faults can occur when running in the kernel. The comments are
also a bit hard to match up with the code.
Trim down the comments, and make them more precise.
Also add a comment explaining why we are doing the
bad_area_nosemaphore() path here.
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180928160227.077DDD7A@viggo.jf.intel.com
|
|
The SMAP and Reserved checking do not have nice comments. Add
some to clarify and make it match everything else.
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180928160225.FFD44B8D@viggo.jf.intel.com
|
|
The last patch broke out kernel address space handing into its own
helper. Now, do the same for user address space handling.
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180928160223.9C4F6440@viggo.jf.intel.com
|
|
The page fault handler (__do_page_fault()) basically has two sections:
one for handling faults in the kernel portion of the address space
and another for faults in the user portion of the address space.
But, these two parts don't stick out that well. Let's make that more
clear from code separation and naming. Pull kernel fault
handling into its own helper, and reflect that naming by renaming
spurious_fault() -> spurious_kernel_fault().
Also, rewrite the vmalloc() handling comment a bit. It was a bit
stale and also glossed over the reserved bit handling.
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180928160222.401F4E10@viggo.jf.intel.com
|
|
We pass around a variable called "error_code" all around the page
fault code. Sounds simple enough, especially since "error_code" looks
like it exactly matches the values that the hardware gives us on the
stack to report the page fault error code (PFEC in SDM parlance).
But, that's not how it works.
For part of the page fault handler, "error_code" does exactly match
PFEC. But, during later parts, it diverges and starts to mean
something a bit different.
Give it two names for its two jobs.
The place it diverges is also really screwy. It's only in a spot
where the hardware tells us we have kernel-mode access that occurred
while we were in usermode accessing user-controlled address space.
Add a warning in there.
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180928160220.4A2272C9@viggo.jf.intel.com
|
|
Memory accesses performed by UEFI runtime services should be limited to:
- reading/executing from EFI_RUNTIME_SERVICES_CODE memory regions
- reading/writing from/to EFI_RUNTIME_SERVICES_DATA memory regions
- reading/writing by-ref arguments
- reading/writing from/to the stack.
Accesses outside these regions may cause the kernel to hang because the
memory region requested by the firmware isn't mapped in efi_pgd, which
causes a page fault in ring 0 and the kernel fails to handle it, leading
to die(). To save kernel from hanging, add an EFI specific page fault
handler which recovers from such faults by
1. If the efi runtime service is efi_reset_system(), reboot the machine
through BIOS.
2. If the efi runtime service is _not_ efi_reset_system(), then freeze
efi_rts_wq and schedule a new process.
The EFI page fault handler offers us two advantages:
1. Avoid potential hangs caused by buggy firmware.
2. Shout loud that the firmware is buggy and hence is not a kernel bug.
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Suggested-by: Matt Fleming <matt@codeblueprint.co.uk>
Based-on-code-from: Ricardo Neri <ricardo.neri@intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
[ardb: clarify commit log]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Now that si_code == SEGV_PKUERR is the flag indicating that a pkey
is present there is no longer a need to pass a pointer to a local
pkey value, instead pkey can be passed more efficiently by value.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Now that the pkey handling has been removed force_sig_info_fault and
force_sig_fault perform identical work. Just the type of the address
paramter is different. So replace calls to force_sig_info_fault with
calls to force_sig_fault, and remove force_sig_info_fault.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
There is only one code path that can generate a pkuerr signal. That
code path calls __bad_area_nosemaphore and can be dectected by testing
if si_code == SEGV_PKUERR. It can be seen from inspection that all of
the other tests in fill_sig_info_pkey are unnecessary.
Therefore call force_sig_pkuerr directly from __bad_area_semaphore and
remove fill_sig_info_pkey.
At the same time move the comment above force_sig_info_pkey into
bad_area_access_error, so that the documentation about pkey generation
races is not lost.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
There is only one caller of __bad_area that passes in PKUERR and thus
will generate a siginfo with si_pkey set. Therefore simplify the
logic and hoist reading of vma_pkey up into that caller, and just
pass *pkey into __bad_area.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
There are no more users of the computed pkey value in __do_page_fault
so stop computing the value.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
After the previous cleanups to do_sigbus and and bad_area_nosemaphore
mm_fault_error no now longer uses it's pkey parameter. Therefore
remove the unused parameter.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The function do_sigbus never sets si_code to PKUERR so it can never
return a pkey to userspace. Therefore remove the unusable pkey
parameter from do_sigbus.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The function bad_area_nosemaphore always sets si_code to SEGV_MAPERR
and as such can never return a pkey parameter. Therefore remove the
unusable pkey parameter from bad_area_nosemaphore.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
