| Age | Commit message (Collapse) | Author |
|---|
|
Only the footbridge platforms provide their own DMA address translation
helpers, so switch to the generic version for all other platforms, and
consolidate the footbridge implementation to remove two levels of
indirection.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Marc Zyngier <maz@kernel.org>
|
|
Use the helpers as expected by the dma-direct code in the old arm
dma-mapping code to ease a gradual switch to the common DMA code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Marc Zyngier <maz@kernel.org>
|
|
virt_to_dma was only used by the now removed dmabounce code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Marc Zyngier <maz@kernel.org>
|
|
With the dmabounce removal these aren't used outside of dma-mapping.c,
so mark them static. Move the dma_map_ops declarations down a bit
to avoid lots of forward declarations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Marc Zyngier <maz@kernel.org>
|
|
Remove the now unused dmabounce code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
|
|
The sa1111 platform is one of the two remaining users of the old Arm
specific "dmabounce" code, which is an earlier implementation of the
generic swiotlb.
Linus Walleij submitted a patch that removes dmabounce support from
the ixp4xx, and I had a look at the other user, which is the sa1111
companion chip.
Looking at how dmabounce is used, I could narrow it down to one driver
one three machines:
- dmabounce is only initialized on assabet/neponset, jornada720 and
badge4, which are the platforms that have an sa1111 and support
DMA on it.
- All three of these suffer from "erratum #7" that requires only
doing DMA to half the memory sections based on one of the address
lines, in addition, the neponset also can't DMA to the RAM that
is connected to sa1111 itself.
- the pxa lubbock machine also has sa1111, but does not support DMA
on it and does not set dmabounce.
- only the OHCI and audio devices on sa1111 support DMA, but as
there is no audio driver for this hardware, only OHCI remains.
In the OHCI code, I noticed that two other platforms already have
a local bounce buffer support in the form of the "local_mem"
allocator. Specifically, TMIO and SM501 use this on a few other ARM
boards with 16KB or 128KB of local SRAM that can be accessed from the
OHCI and from the CPU.
While this is not the same problem as on sa1111, I could not find a
reason why we can't re-use the existing implementation but replace the
physical SRAM address mapping with a locally allocated DMA buffer.
There are two main downsides:
- rather than using a dynamically sized pool, this buffer needs
to be allocated at probe time using a fixed size. Without
having any idea of what it should be, I picked a size of
64KB, which is between what the other two OHCI front-ends use
in their SRAM. If anyone has a better idea what that size
is reasonable, this can be trivially changed.
- Previously, only USB transfers to unaddressable memory needed
to go through the bounce buffer, now all of them do, which may
impact runtime performance for USB endpoints that do a lot of
transfers.
On the upside, the local_mem support uses write-combining buffers,
which should be a bit faster for transfers to the device compared to
normal uncached coherent memory as used in dmabounce.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Latest drivers version requires phy-mode to be set. Otherwise we will
use "NA" mode and the switch driver will invalidate this port mode.
Fixes: 65ac79e18120 ("net: dsa: microchip: add the phylink get_caps")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20220610081621.584393-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to support virtio in Xen guests add a config option XEN_VIRTIO
enabling the user to specify whether in all Xen guests virtio should
be able to access memory via Xen grant mappings only on the host side.
Also set PLATFORM_VIRTIO_RESTRICTED_MEM_ACCESS feature from the guest
initialization code on Arm and x86 if CONFIG_XEN_VIRTIO is enabled.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/1654197833-25362-5-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This patch introduces new helper and places it in new header.
The helper's purpose is to assign any Xen specific DMA ops in
a single place. For now, we deal with xen-swiotlb DMA ops only.
The one of the subsequent commits in current series will add
xen-grant DMA ops case.
Also re-use the xen_swiotlb_detect() check on Arm32.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
[For arm64]
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/1654197833-25362-2-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull kthread updates from Eric Biederman:
"This updates init and user mode helper tasks to be ordinary user mode
tasks.
Commit 40966e316f86 ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
Here, commit 343f4c49f243 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple
enough to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace
thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code
sitting in linux-next"
* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched: Update task_tick_numa to ignore tasks without an mm
fork: Stop allowing kthreads to call execve
fork: Explicitly set PF_KTHREAD
init: Deal with the init process being a user mode process
fork: Generalize PF_IO_WORKER handling
fork: Explicity test for idle tasks in copy_thread
fork: Pass struct kernel_clone_args into copy_thread
kthread: Don't allocate kthread_struct for init and umh
|
|
With all the header files out of the way, and the clock driver
converted to the common framework, nothing stops us from building
OMAP together with the other platforms.
As usual, the decompressor support is a victim here, and is
only available when CONFIG_DEBUG_LL is configured for the
particular board.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
OMAP1 still uses its own implementation of standard clock API defined in
include/linux/clk.h. Internals of that implementation are not visible
outside OMAP1 directory. As a consequence, device drivers are not able to
register clocks potentially provided by peripheral devices.
Drop OMAP1 implementation of the clock API and enable common clock
framework. Modify the remaining low level code to be compatible with
clock provider API and register the clocks with CCF.
Move initialisation of clocks to omap1_timer_init() to avoid memory
allocation issues at early setup phase from where omap1_init_early() is
called. Register the clocks after initialization of clock I/O registers,
local clock pointers used by OMAP1 clock ops, and local .rate fields of
clocks with no local implementation of .recalc ops, so CCF structures are
populated with correct data during clock registration. Instead of
enabling some of the registered clocks, flag them for CCF as critical.
Introduce .is_enabled op using code that verifies hardware status of clock
enablement, split out from implementation of .disable_unused op, so the
latter is actually called by CCF for not requested but hardware enabled
clocks. Add .round_rate ops where missing so .set_rate ops are called by
CCF as expected. Since CCF allows parallel execution of .enable/.disable
and .set_rate ops, protect registers shared among those groups of ops from
concurrent access with spinlocks. Drop local debugfs support in favor of
that provided by CCF.
v2: flag tc2_ck as CLK_IS_CRITICAL (Aaro)
v3: rebase on top of soc/omap1-multiplatform-5.18,
- drop no longer needed includes from arch/arm/mach-omap1/io.c
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver changes for
5.18-rc1. For the most part it's been a quiet development cycle for
the USB core, but there are the usual "hot spots" of development
activity.
Included in here are:
- Thunderbolt driver updates:
- fixes for devices without displayport adapters
- lane bonding support and improvements
- other minor changes based on device testing
- dwc3 gadget driver changes.
It seems this driver will never be finished given that the IP core
is showing up in zillions of new devices and each implementation
decides to do something different with it...
- uvc gadget driver updates as more devices start to use and rely on
this hardware as well
- usb_maxpacket() api changes to remove an unneeded and unused
parameter.
- usb-serial driver device id updates and small cleanups
- typec cleanups and fixes based on device testing
- device tree updates for usb properties
- lots of other small fixes and driver updates.
All of these have been in linux-next for weeks with no reported
problems"
* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
USB: new quirk for Dell Gen 2 devices
usb: dwc3: core: Add error log when core soft reset failed
usb: dwc3: gadget: Move null pinter check to proper place
usb: hub: Simplify error and success path in port_over_current_notify
usb: cdns3: allocate TX FIFO size according to composite EP number
usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
usb: Probe EHCI, OHCI controllers asynchronously
usb: isp1760: Fix out-of-bounds array access
xhci: Don't defer primary roothub registration if there is only one roothub
USB: serial: option: add Quectel BG95 modem
USB: serial: pl2303: fix type detection for odd device
xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
xhci: Remove quirk for over 10 year old evaluation hardware
xhci: prevent U2 link power state if Intel tier policy prevented U1
xhci: use generic command timer for stop endpoint commands.
usb: host: xhci-plat: omit shared hcd if either root hub has no ports
usb: host: xhci-plat: prepare operation w/o shared hcd
usb: host: xhci-plat: create shared hcd after having added main hcd
xhci: prepare for operation w/o shared hcd
xhci: factor out parts of xhci_gen_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"This is the second part of the general SoC updates, containing
everything that did not make it in the initial pull request, or that
came in as a bugfix later.
- Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip,
including a new machine using an ASPEED BMC.
- More DT fixes from Krzysztof Kozlowski across platforms
- A new SoC platform for the GXP baseboard management controller,
used in current server products from HPE"
* tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits)
ARM: configs: Enable more audio support for i.MX
tee: optee: Pass a pointer to virt_addr_valid()
arm64: dts: rockchip: rename Quartz64-A bluetooth gpios
arm64: dts: rockchip: add clocks property to cru node rk3368
arm64: dts: rockchip: add clocks property to cru node rk3308
arm64: dts: rockchip: add clocks to rk356x cru
ARM: dts: rockchip: add clocks property to cru node rk3228
ARM: dts: rockchip: add clocks property to cru node rk3036
ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
ARM: dts: rockchip: add clocks property to cru node rk3288
ARM: dts: rockchip: Remove "amba" bus nodes from rv1108
ARM: dts: rockchip: add clocks property to cru node rv1108
arm64: dts: sprd: use new 'dma-channels' property
ARM: dts: da850: use new 'dma-channels' property
ARM: dts: pxa: use new 'dma-channels/requests' properties
soc: ixp4xx/qmgr: Fix unused match warning
ARM: ep93xx: Make ts72xx_register_flash() static
ARM: configs: enable support for Kontron KSwitch D10
ep93xx: clock: Do not return the address of the freed memory
arm64: dts: intel: add device tree for n6000
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM multiplatform updates from Arnd Bergmann:
"The second part of the multiplatform changes now converts the
Intel/Marvell PXA platform along with the rest. The patches went
through several rebases before the merge window as bugs were found, so
they remained separate.
This has to touch a lot of drivers, in particular the touchscreen,
pcmcia, sound and clk bits, to detach the driver files from the
platform and board specific header files"
* tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
ARM: pxa/mmp: remove traces of plat-pxa
ARM: pxa: convert to multiplatform
ARM: pxa/sa1100: move I/O space to PCI_IOBASE
ARM: pxa: remove support for MTD_XIP
ARM: pxa: move mach/*.h to mach-pxa/
ARM: PXA: fix multi-cpu build of xsc3
ARM: pxa: move plat-pxa to drivers/soc/
ARM: mmp: rename pxa_register_device
ARM: mmp: remove tavorevb board support
ARM: pxa: remove unused mach/bitfield.h
ARM: pxa: move clk register definitions to driver
ARM: pxa: move smemc register access from clk to platform
cpufreq: pxa3: move clk register access to clk driver
ARM: pxa: remove get_clk_frequency_khz()
ARM: pxa: pcmcia: move smemc configuration back to arch
ASoC: pxa: i2s: use normal MMIO accessors
ASoC: pxa: ac97: use normal MMIO accessors
ASoC: pxa: use pdev resource for FIFO regs
Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops
Input: wm97xx - switch to using threaded IRQ
...
|
|
The missing include directory caused a W=1 warning that can be
trivially fixed. I also noticed references in the marvell.rst
documentation that can be removed at the same time.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
|
|
The generic audio card for Freescale platforms is used by a wide range
of i.MX systems and also has selects for the various audio controllers
used on them so will help with systems that don't use that specific card
too.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20220513121258.168364-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/late
SoCFPGA dts updates for v5.19
- dtschema fix SPI NOR node
- correct dt-bindings doc for Altera gpio driver
- add support for n6000 Agilex platform and dt-bindings documentation
* tag 'socfpga_dts_updates_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: intel: add device tree for n6000
dt-bindings: intel: add binding for Intel n6000
dt-bindings: soc: add bindings for Intel HPS Copy Engine
dt-bindings: gpio: altera: correct interrupt-cells
ARM: dts: socfpga: align SPI NOR node name with dtschema
Link: https://lore.kernel.org/r/20220519232317.16079-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/late
ASPEED device tree updates for 5.19
- New machine:
* Nuvia's DC-SCM BMC
- Enable AST2600 GFX, the BMC-driven graphics device
- Add a bunch of devices for the AST2600 EVB
- Updates to the AST2600 Bletchley machine
- Backwards compatible changes to support the new spi-mem based SPI NOR
driver
* tag 'aspeed-5.19-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: ast2600-evb: Enable GFX device
ARM: dts: aspeed: Add GFX node to AST2600
ARM: dts: aspeed: ast2600-evb: Enable virtual hub
ARM: dts: aspeed: ast2600-evb: Enable video engine
ARM: dts: aspeed: everest, rainier: Add power-ffs-sync-history GPIO
ARM: dts: aspeed: Add Nuvia DC-SCM BMC
ARM: dts: aspeed: bletchley: add sample averaging for ADM1278
ARM: dts: aspeed: bletchley: add eeprom node on each sled
ARM: dts: aspeed: bletchley: add pca9536 node on each sled
ARM: dts: aspeed: bletchley: update gpio0 line names
ARM: dts: aspeed: bletchley: Enable mdio0 bus
ARM: dts: aspeed: bletchley: switch spi2 driver to aspeed-smc
ARM: dts: aspeed: bletchley: enable ehci0 device node
ARM: dts: aspeed: Add USB2.0 device controller node
ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes
ARM: dts: aspeed: Enable Dual SPI RX transfers
ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers
ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1
Link: https://lore.kernel.org/r/CACPK8XfUmFxU8Y6C+aZ2+=dT7=fCfs2=2_aYqyRjoXCoeQaUWQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The majority of the changes are for fixes and clean ups.
Notable changes:
- Rework trace event triggers code to be easier to interact with.
- Support for embedding bootconfig with the kernel (as suppose to
having it embedded in initram). This is useful for embedded boards
without initram disks.
- Speed up boot by parallelizing the creation of tracefs files.
- Allow absolute ring buffer timestamps handle timestamps that use
more than 59 bits.
- Added new tracing clock "TAI" (International Atomic Time)
- Have weak functions show up in available_filter_function list as:
__ftrace_invalid_address___<invalid-offset> instead of using the
name of the function before it"
* tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (52 commits)
ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function
tracing: Fix comments for event_trigger_separate_filter()
x86/traceponit: Fix comment about irq vector tracepoints
x86,tracing: Remove unused headers
ftrace: Clean up hash direct_functions on register failures
tracing: Fix comments of create_filter()
tracing: Disable kcov on trace_preemptirq.c
tracing: Initialize integer variable to prevent garbage return value
ftrace: Fix typo in comment
ftrace: Remove return value of ftrace_arch_modify_*()
tracing: Cleanup code by removing init "char *name"
tracing: Change "char *" string form to "char []"
tracing/timerlat: Do not wakeup the thread if the trace stops at the IRQ
tracing/timerlat: Print stacktrace in the IRQ handler if needed
tracing/timerlat: Notify IRQ new max latency only if stop tracing is set
kprobes: Fix build errors with CONFIG_KRETPROBES=n
tracing: Fix return value of trace_pid_write()
tracing: Fix potential double free in create_var_ref()
tracing: Use strim() to remove whitespace instead of doing it manually
ftrace: Deal with error return code of the ftrace_process_locs() function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/late
Amba and clock fixes to conform better to actual dt-bindings.
* tag 'v5.19-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add clocks property to cru node rk3228
ARM: dts: rockchip: add clocks property to cru node rk3036
ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
ARM: dts: rockchip: add clocks property to cru node rk3288
ARM: dts: rockchip: Remove "amba" bus nodes from rv1108
ARM: dts: rockchip: add clocks property to cru node rv1108
Link: https://lore.kernel.org/r/4798587.jE0xQCEvom@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"The non-MM patch queue for this merge window.
Not a lot of material this cycle. Many singleton patches against
various subsystems. Most notably some maintenance work in ocfs2
and initramfs"
* tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits)
kcov: update pos before writing pc in trace function
ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock
fs/ntfs: remove redundant variable idx
fat: remove time truncations in vfat_create/vfat_mkdir
fat: report creation time in statx
fat: ignore ctime updates, and keep ctime identical to mtime in memory
fat: split fat_truncate_time() into separate functions
MAINTAINERS: add Muchun as a memcg reviewer
proc/sysctl: make protected_* world readable
ia64: mca: drop redundant spinlock initialization
tty: fix deadlock caused by calling printk() under tty_port->lock
relay: remove redundant assignment to pointer buf
fs/ntfs3: validate BOOT sectors_per_clusters
lib/string_helpers: fix not adding strarray to device's resource list
kernel/crash_core.c: remove redundant check of ck_cmdline
ELF, uapi: fixup ELF_ST_TYPE definition
ipc/mqueue: use get_tree_nodev() in mqueue_get_tree()
ipc: update semtimedop() to use hrtimer
ipc/sem: remove redundant assignments
...
|
|
Add clocks and clock-names to the rk3228 cru node, because
the device has to have at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220330121923.24240-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add clocks and clock-names to the rk3036 cru node, because
the device has to have at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220330114847.18633-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add clocks property to rk3066a/rk3188 cru node to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220329111323.3569-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add clocks property to rk3288 cru node to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220329113657.4567-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The "amba" bus nodes wrapping all the DMA-330 nodes serve no useful
purpose, and certainly bear no relation at all to the actual underlying
interconnect topology. They appear to be cargo-cult copying from a
design misstep in the very early days of FDT adoption on ARM, which was
righted with the "arm,primecell" compatible, and the last trace of the
idea finally purged by commit 2ef7d5f342c1 ("ARM, ARM64: dts: drop
"arm,amba-bus" in favor of "simple-bus"").
As such, they can simply be removed and the DMA-330 nodes fitted into
the normal sort order.
The node names should be generic, so rename it to "dma-controller".
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220330131608.30040-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add clocks and clock-names to the rv1108 cru node, because
the device has to have at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220330131608.30040-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The '#dma-channels' property was deprecated in favor of one defined by
generic dma-common DT bindings. Add new property while keeping old one
for backwards compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220516142857.6419-3-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The '#dma-channels' and '#dma-requests' properties were deprecated in
favor of these defined by generic dma-common DT bindings. Add new
properties while keeping old ones for backwards compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220516142857.6419-2-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
... and fix the warning/error:
arch/arm/mach-ep93xx/ts72xx.c:154:13: error: no previous prototype for function 'ts72xx_register_flash' [-Werror,-Wmissing-prototypes]
void __init ts72xx_register_flash(struct mtd_partition *parts, int n,
^
arch/arm/mach-ep93xx/ts72xx.c:154:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void __init ts72xx_register_flash(struct mtd_partition *parts, int n,
^
static
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/lkml/202202140141.HRZ3WZwi-lkp@intel.com/T/
Link: https://lore.kernel.org/r/20220523065616.325052-1-alexander.sverdlin@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Kontron KSwitch D10 is based on a Microchip LAN9668 SoC. It is a
managed ethernet network switch with either 8 copper ports or 6 copper
ports and 2 SFP cages.
Enable all required kconfig symbols, either as module where possible or
compiled-in where it is not possible.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220518141542.531148-1-michael@walle.cc'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/late
AT91 DT #2 for 5.19:
- at91: more DT compliance updates for RTC and RTT nodes
- at91: sama7g5: add microphone support
* tag 'at91-dt-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5ek: add node for PDMC0
ARM: dts: at91: sama7g5: add nodes for PDMC
ARM: dts: at91: Use the generic "rtc" node name for the rtt IPs
ARM: dts: at91: Add the required 'atmel, rtt-rtc-time-reg' property
Link: https://lore.kernel.org/r/20220517153252.92393-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/late
AT91 SoC #2 for 5.19:
- One Kconfig fix for random build error
* tag 'at91-soc-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: pm: Fix rand build error
Link: https://lore.kernel.org/r/20220517150832.89451-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Avoid return freed memory addresses,Modified to the actual error
return value of clk_register().
Fixes: 9645ccc7bd7a ("ep93xx: clock: convert in-place to COMMON_CLK")
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Patch series from Nick Hawkins:
"The GXP is the HPE BMC SoC that is used in the majority of HPE current
generation servers. Traditionally the asic will last multiple
generations of server before being replaced.
Info about SoC:
HPE GXP is the name of the HPE Soc. This SoC is used to implement many
BMC features at HPE. It supports ARMv7 architecture based on the Cortex
A9 core. It is capable of using an AXI bus to which a memory controller
is attached. It has multiple SPI interfaces to connect boot flash and
BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It has
multiple i2c engines to drive connectivity with a host infrastructure.
The initial patches enable the watchdog and timer enabling the host to
be able to boot."
* hpe/gxp-soc:
MAINTAINERS: Introduce HPE GXP Architecture
ARM: dts: Introduce HPE GXP Device tree
dt-bindings: arm: hpe: add GXP Support
dt-bindings: timer: hpe,gxp-timer: Add HPE GXP Timer and Watchdog
clocksource/drivers/timer-gxp: Add HPE GXP Timer
watchdog: hpe-wdt: Introduce HPE GXP Watchdog
ARM: configs: multi_v7_defconfig: Add HPE GXP ARCH
ARM: hpe: Introduce the HPE GXP architecture
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
All instances of the function ftrace_arch_modify_prepare() and
ftrace_arch_modify_post_process() return zero. There's no point in
checking their return value. Just have them be void functions.
Link: https://lkml.kernel.org/r/20220518023639.4065-1-kunyu@nfschina.com
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have lots of small changes all over the place, but no huge reworks
or new drivers:
- use ioread()/iowrite() interfaces instead of raw inb()/outb() in
drivers
- make irqchips immutable due to the new warning popping up when
drivers try to modify the irqchip structures
- add new compatibles to dt-bindings for realtek-otto, renesas-rcar
and pca95xx
- add support for new models to gpio-rcar, gpio-pca953x &
gpio-realtek-otto
- allow parsing of GPIO hogs represented as children nodes of
gpio-uniphier
- define a set of common GPIO consumer strings in dt-bindings
- shrink code in gpio-ml-ioh by using more devres interfaces
- pass arguments to devm_kcalloc() in correct order in gpio-sim
- add new helpers for iterating over GPIO firmware nodes and
descriptors to gpiolib core and use it in several drivers
- drop unused syscon_regmap_lookup_by_compatible() function
- correct format specifiers and signedness of variables in GPIO ACPI
- drop unneeded error checks in gpio-ftgpio
- stop using the deprecated of_gpio.h header in gpio-zevio
- drop platform_data support in gpio-max732x
- simplify Kconfig dependencies in gpio-vf610
- use raw spinlocks where needed to make PREEMPT_RT happy
- fix return values in board files using gpio-pcf857x
- convert more drivers to using fwnode instead of of_node
- minor fixes and improvements in gpiolib core"
* tag 'gpio-updates-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (55 commits)
gpio: sifive: Make the irqchip immutable
gpio: rcar: Make the irqchip immutable
gpio: pcf857x: Make the irqchip immutable
gpio: pca953x: Make the irqchip immutable
gpio: dwapb: Make the irqchip immutable
gpio: sim: Use correct order for the parameters of devm_kcalloc()
gpio: ml-ioh: Convert to use managed functions pcim* and devm_*
gpio: ftgpio: Remove unneeded ERROR check before clk_disable_unprepare
gpio: ws16c48: Utilize iomap interface
gpio: gpio-mm: Utilize iomap interface
gpio: 104-idio-16: Utilize iomap interface
gpio: 104-idi-48: Utilize iomap interface
gpio: 104-dio-48e: Utilize iomap interface
gpio: zevio: drop of_gpio.h header
gpio: max77620: Make the irqchip immutable
dt-bindings: gpio: pca95xx: add entry for pca6408
gpio: pca953xx: Add support for pca6408
gpio: max732x: Drop unused support for irq and setup code via platform data
gpio: vf610: drop the SOC_VF610 dependency for GPIO_VF610
gpio: syscon: Remove usage of syscon_regmap_lookup_by_compatible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
* tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits)
genksyms: adjust the output format to modpost
kbuild: stop merging *.symversions
kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
modpost: extract symbol versions from *.cmd files
modpost: add sym_find_with_module() helper
modpost: change the license of EXPORT_SYMBOL to bool type
modpost: remove left-over cross_compile declaration
kbuild: record symbol versions in *.cmd files
kbuild: generate a list of objects in vmlinux
modpost: move *.mod.c generation to write_mod_c_files()
modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header
scripts/prune-kernel: Use kernel-install if available
kbuild: factor out the common installation code into scripts/install.sh
modpost: split new_symbol() to symbol allocation and hash table addition
modpost: make sym_add_exported() always allocate a new symbol
modpost: make multiple export error
modpost: dump Module.symvers in the same order of modules.order
modpost: traverse the namespace_list in order
modpost: use doubly linked list for dump_lists
modpost: traverse unresolved symbols in order
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARMv4T/v5 multiplatform support from Arnd Bergmann:
"This series has been 12 years in the making, it mostly finishes the
work that was started with the founding of Linaro to clean up platform
support in the kernel.
The largest change here is a cleanup of the omap1 platform, which is
the final ARM machine type to get converted to the common-clk
subsystem. All the omap1 specific drivers are now made independent of
the mach/*.h headers to allow the platform to be part of a generic
ARMv4/v5 multiplatform kernel.
The last bit that enables this support is still missing here while we
wait for some last dependencies to make it into the mainline kernel
through other subsystems.
The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost
at the point of allowing multiplatform kernels, this work gets
completed here along with a few additional cleanup. At the same time,
the s3c24xx and s3c64xx are now deprecated and expected to get removed
in the future.
The PXA and OMAP1 bits are in a separate branch because of
dependencies. Once both branches are merged, only the three Intel
StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100)
need separate kernels, and there are no plans to include these"
* tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
ARM: ixp4xx: Consolidate Kconfig fixing issue
ARM: versatile: Add missing of_node_put in dcscb_init
ARM: config: Refresh IXP4xx config after multiplatform
ARM: omap1: add back omap_set_dma_priority() stub
ARM: omap: fix missing declaration warnings
ARM: omap: fix address space warnings from sparse
ARM: spear: remove include/mach/ subdirectory
ARM: davinci: remove include/mach/ subdirectory
ARM: omap2: remove include/mach/ subdirectory
integrator: remove empty ap_init_early()
ARM: s3c: fix include path
MAINTAINERS: omap1: Add Janusz as an additional maintainer
ARM: omap1: htc_herald: fix typos in comments
ARM: OMAP1: fix typos in comments
ARM: OMAP1: clock: Remove noop code
ARM: OMAP1: clock: Remove unused code
ARM: OMAP1: clock: Fix UART rate reporting algorithm
ARM: OMAP1: clock: Fix early UART rate issues
ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF
ARM: omap1: fix build with no SoC selected
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"Lots of smaller additions to the defconfig files for both 32-bit and
64-bit arm platforms, enabling drivers that are now usable on common
hardware, and a few options to make it possible to boot a file system
image using systemd"
* tag 'arm-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (39 commits)
ARM: configs: Enable ASoC AC'97 glue
ARM: configs: Enable audio on BeagleBone Black in multi_v7_defconfig
ARM: configs: at91: Enable AUTOFS_FS required by systemd
ARM: configs: at91: Enable options required for systemd
ARM: configs: at91: sama7: enable CONFIG_RESET_CONTROLLER
ARM: configs: at91: sama7: add MCHP PDMC and DMIC drivers
ARM: configs: at91: sama7: Enable MTD_UBI_BLOCK
ARM: configs: at91: sama7: Enable MTD_UBI_FASTMAP
ARM: configs: at91: sama7: add xisc and csi2dc
ARM: multi_v7_defconfig: add atmel video pipeline modules
ARM: configs: at91: Remove MTD_BLOCK and use MTD_UBI_BLOCK for read only block FS
arm64: defconfig: Enable the WM8524 codec driver
arm64: defconfig: Enable modules for arm displays
arm: nomadik: drop selecting obsolete CLKSRC_NOMADIK_MTU_SCHED_CLOCK
arm64: defconfig: Enable Renesas RZ/V2M SoC
arm64: defconfig: Enable ARCH_R9A07G043
arm64: defconfig: Enable configs for DisplayPort on J721e
arm64: defconfig: Build Tegra ASRC module
ARM: multi_v7_defconfig: enable CONFIG_ARCH_BCMBCA in armv7 defconfig
arm: mediatek: select arch timer for mt7629
...
|
|
Pull ARM DT updates from Arnd Bergmann:
"There are 40 branches this time, adding a lot of new hardware support,
and cleanups. Krzysztof Kozlowski continues his treewide cleanups.
There are a number of new SoCs, all of them as part of existing
families, and typically added along with a reference board:
- Renesas RZ/G2UL (R9A07G043) is the single-core version of the
RZ/G2L general-purpose MPU.
- Renesas RZ/V2M (R9A09G011) is a smart camera SoC
- Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
cores and deep learning accerlation.
- Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
and dual Wifi-6.
- Corstone1000 is a generic platform from Arm that is used for
designing custom SoCs, the support for now is for the Fixed Virtual
Platform emulation for it.
- Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in
upcoming Chromebooks.
- NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
MMU-less SoC to be added in a while
New machines based on already supported SoCs this time are mainly for
32-bit platforms and include:
- Two wireless routers based on Broadcom bcm4708
- 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
for the industrial embedded market, and on NXP LS1021A based IOT
board.
- Two ethernet switches based on Microchip LAN966
- Eight Qualcomm Snapdragon based machines, including a smartwatch, a
Chromebook board and some phones
- Another phone based on the old ST-Ericsson Ux500 platform
- Seven STM32MP1 based boards
- Four single-board computers based on Rockchip RK3566/RK3568"
* tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits)
ARM: dts: kswitch-d10: enable networking
ARM: dts: lan966x: add switch node
ARM: dts: lan966x: add serdes node
ARM: dts: lan966x: add reset switch reset node
ARM: dts: lan966x: add MIIM nodes
ARM: dts: lan966x: add hwmon node
ARM: dts: lan966x: add basic Kontron KSwitch D10 support
ARM: dts: lan966x: add flexcom I2C nodes
ARM: dts: lan966x: add flexcom SPI nodes
ARM: dts: lan966x: add all flexcom usart nodes
ARM: dts: lan966x: add missing uart DMA channel
ARM: dts: lan966x: add sgpio node
ARM: dts: lan966x: swap dma channels for crypto node
ARM: dts: lan966x: rename pinctrl nodes
ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
ARM: dts: at91: use generic node name for dataflash
ARM: dts: turris-omnia: Add atsha204a node
arm64: dts: mt8192: Follow binding order for SCP registers
arm64: dts: mediatek: add mtk-snfi for mt7622
arm64: dts: mediatek: mt8195-demo: enable uart1
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull 32-bit ARM SoC updates from Arnd Bergmann:
"These updates are for platform specific code in arch/arm/, mostly
fixing minor issues.
The at91 platform gains support for better power management on the
lan966 platform and new firmware on the sama5 platform. The mediatek
soc drivers in turn are enabled for the new mt8195 SoC"
* tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
ARM: at91: debug: add lan966 support
ARM: at91: pm: add support for sama5d2 secure suspend
ARM: at91: add code to handle secure calls
ARM: at91: Kconfig: implement PIT64B selection
ARM: at91: pm: add quirks for pm
ARM: at91: pm: use kernel documentation style
ARM: at91: pm: introduce macros for pm mode replacement
ARM: at91: pm: keep documentation inline with structure members
orion5x: fix typos in comments
ARM: hisi: Add missing of_node_put after of_find_compatible_node
ARM: shmobile: rcar-gen2: Drop comma after OF match table sentinel
ARM: shmobile: Drop commas after dt_compat sentinels
soc: mediatek: mutex: remove mt8195 MOD0 and SOF0 definition
MAINTAINERS: Add Broadcom BCMBCA entry
arm: bcmbca: add arch bcmbca machine entry
MAINTAINERS: Broadcom internal lists aren't maintainers
dt-bindings: pwrap: mediatek: Update pwrap document for mt8195
soc: mediatek: add DDP_DOMPONENT_DITHER0 enum for mt8195 vdosys0
soc: mediatek: add mtk-mutex support for mt8195 vdosys0
soc: mediatek: add mtk-mmsys support for mt8195 vdosys0
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- don't over-decrypt memory (Robin Murphy)
- takes min align mask into account for the swiotlb max mapping size
(Tianyu Lan)
- use GFP_ATOMIC in dma-debug (Mikulas Patocka)
- fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
- don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
- cleanup swiotlb initialization and share more code with swiotlb-xen
(me, Stefano Stabellini)
* tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits)
dma-direct: don't over-decrypt memory
swiotlb: max mapping size takes min align mask into account
swiotlb: use the right nslabs-derived sizes in swiotlb_init_late
swiotlb: use the right nslabs value in swiotlb_init_remap
swiotlb: don't panic when the swiotlb buffer can't be allocated
dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages
swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm
x86: remove cruft from <asm/dma-mapping.h>
swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl
swiotlb: merge swiotlb-xen initialization into swiotlb
swiotlb: provide swiotlb_init variants that remap the buffer
swiotlb: pass a gfp_mask argument to swiotlb_init_late
swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction
swiotlb: make the swiotlb_init interface more useful
x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled
x86: remove the IOMMU table infrastructure
MIPS/octeon: use swiotlb_init instead of open coding it
arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region
swiotlb: rename swiotlb_late_init_with_default_size
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Not much dramatic changes at this time, but we've received quite a lot
of changes for ASoC, while there are still a few fixes and quirks for
usual HD- and USB-auido. Here are some highlights.
ASoC:
- Overhaul of endianness specification for data formats, avoiding
needless restrictions due to CODECs
- Initial stages of Intel AVS driver merge
- Introduction of v4 IPC mechanism for SOF
- TDM mode support for AK4613
- Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
Others:
- A few regression fixes after the USB-audio endpoint management
refactoring
- More enhancements for Cirrus HD-audio codec support (still ongoing)
- Addition of generic serial MIDI driver"
* tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits)
ALSA: hda/realtek - Add new type for ALC245
ALSA: usb-audio: Configure sync endpoints before data
ALSA: ctxfi: fix typo in comment
ALSA: cs5535audio: fix typo in comment
ALSA: ctxfi: Add SB046x PCI ID
ALSA: usb-audio: Add missing ep_idx in fixed EP quirks
ALSA: usb-audio: Workaround for clock setup on TEAC devices
ALSA: lola: Bounds check loop iterator against streams array size
ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv()
ASoC: rt1308-sdw: add the default value of register 0xc320
ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic
ASoC: rt9120: Fix 3byte read, valule offset typo
ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver.
ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver
ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR'
ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get()
ASoC: SOF: mediatek: remove duplicate include in mt8195.c
ASoC: SOF: mediatek: Add mt8195 debug dump
ASoC: SOF: mediatek: Add mediatek common debug dump
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
|
|
The IXP4xx Kconfig we ended up with for mach-ixp4xx creates
as kismet warning:
WARNING: unmet direct dependencies detected for GPIO_IXP4XX
Depends on [n]: GPIOLIB [=y] && HAS_IOMEM [=y] && ARCH_IXP4XX [=y] && OF [=n]
Selected by [y]:
- ARCH_IXP4XX [=y] && <choice>
This is because it is possible to select ARCH_IXP4XX witout
OF while that selects the GPIO driver that now depends on
OF.
Fix this by creating a single ARCH_IXP4XX kconfig that selects
USE_OF.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Link: https://lore.kernel.org/r/20220522072356.34062-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- Fix binfmt_flat GOT handling for riscv (Niklas Cassel)
- Remove unused/broken binfmt_flat shared library and coredump code
(Eric W. Biederman)
* tag 'execve-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_flat: Remove shared library support
binfmt_flat: Drop vestiges of coredump support
binfmt_flat: do not stop relocating GOT entries prematurely on riscv
|
