| Age | Commit message (Collapse) | Author |
|---|
|
Commit 6aa0365a3c85 ("ata: libata-scsi: Avoid deadlock on rescan after
device resume") modified ata_scsi_dev_rescan() to check the scsi device
"is_suspended" power field to ensure that the scsi device associated
with an ATA device is fully resumed when scsi_rescan_device() is
executed. However, this fix is problematic as:
1) It relies on a PM internal field that should not be used without PM
device locking protection.
2) The check for is_suspended and the call to scsi_rescan_device() are
not atomic and a suspend PM event may be triggered between them,
casuing scsi_rescan_device() to be called on a suspended device and
in that function blocking while holding the scsi device lock. This
would deadlock a following resume operation.
These problems can trigger PM deadlocks on resume, especially with
resume operations triggered quickly after or during suspend operations.
E.g., a simple bash script like:
for (( i=0; i<10; i++ )); do
echo "+2 > /sys/class/rtc/rtc0/wakealarm
echo mem > /sys/power/state
done
that triggers a resume 2 seconds after starting suspending a system can
quickly lead to a PM deadlock preventing the system from correctly
resuming.
Fix this by replacing the check on is_suspended with a check on the
return value given by scsi_rescan_device() as that function will fail if
called against a suspended device. Also make sure rescan tasks already
scheduled are first cancelled before suspending an ata port.
Fixes: 6aa0365a3c85 ("ata: libata-scsi: Avoid deadlock on rescan after device resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_rescan_device() takes a scsi device lock before executing a device
handler and device driver rescan methods. Waiting for the completion of
any command issued to the device by these methods will thus be done with
the device lock held. As a result, there is a risk of deadlocking within
the power management code if scsi_rescan_device() is called to handle a
device resume with the associated scsi device not yet resumed.
Avoid such situation by checking that the target scsi device is in the
running state, that is, fully capable of executing commands, before
proceeding with the rescan and bailout returning -EWOULDBLOCK otherwise.
With this error return, the caller can retry rescaning the device after
a delay.
The state check is done with the device lock held and is thus safe
against incoming suspend power management operations.
Fixes: 6aa0365a3c85 ("ata: libata-scsi: Avoid deadlock on rescan after device resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
|
|
The introduction of a device link to create a consumer/supplier
relationship between the scsi device of an ATA device and the ATA port
of that ATA device fixes the ordering of system suspend and resume
operations. For suspend, the scsi device is suspended first and the ata
port after it. This is fine as this allows the synchronize cache and
START STOP UNIT commands issued by the scsi disk driver to be executed
before the ata port is disabled.
For resume operations, the ata port is resumed first, followed
by the scsi device. This allows having the request queue of the scsi
device to be unfrozen after the ata port resume is scheduled in EH,
thus avoiding to see new requests prematurely issued to the ATA device.
Since libata sets manage_system_start_stop to 1, the scsi disk resume
operation also results in issuing a START STOP UNIT command to the
device being resumed so that the device exits standby power mode.
However, restoring the ATA device to the active power mode must be
synchronized with libata EH processing of the port resume operation to
avoid either 1) seeing the start stop unit command being received too
early when the port is not yet resumed and ready to accept commands, or
after the port resume process issues commands such as IDENTIFY to
revalidate the device. In this last case, the risk is that the device
revalidation fails with timeout errors as the drive is still spun down.
Commit 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume")
disabled issuing the START STOP UNIT command to avoid issues with it.
But this is incorrect as transitioning a device to the active power
mode from the standby power mode set on suspend requires a media access
command. The IDENTIFY, READ LOG and SET FEATURES commands executed in
libata EH context triggered by the ata port resume operation may thus
fail.
Fix these synchronization issues is by handling a device power mode
transitions for system suspend and resume directly in libata EH context,
without relying on the scsi disk driver management triggered with the
manage_system_start_stop flag.
To do this, the following libata helper functions are introduced:
1) ata_dev_power_set_standby():
This function issues a STANDBY IMMEDIATE command to transitiom a device
to the standby power mode. For HDDs, this spins down the disks. This
function applies only to ATA and ZAC devices and does nothing otherwise.
This function also does nothing for devices that have the
ATA_FLAG_NO_POWEROFF_SPINDOWN or ATA_FLAG_NO_HIBERNATE_SPINDOWN flag
set.
For suspend, call ata_dev_power_set_standby() in
ata_eh_handle_port_suspend() before the port is disabled and frozen.
ata_eh_unload() is also modified to transition all enabled devices to
the standby power mode when the system is shutdown or devices removed.
2) ata_dev_power_set_active() and
This function applies to ATA or ZAC devices and issues a VERIFY command
for 1 sector at LBA 0 to transition the device to the active power mode.
For HDDs, since this function will complete only once the disk spin up.
Its execution uses the same timeouts as for reset, to give the drive
enough time to complete spinup without triggering a command timeout.
For resume, call ata_dev_power_set_active() in
ata_eh_revalidate_and_attach() after the port has been enabled and
before any other command is issued to the device.
With these changes, the manage_system_start_stop and no_start_on_resume
scsi device flags do not need to be set in ata_scsi_dev_config(). The
flag manage_runtime_start_stop is still set to allow the sd driver to
spinup/spindown a disk through the sd runtime operations.
Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The underlying device and driver of a SCSI disk may have different
system and runtime power mode control requirements. This is because
runtime power management affects only the SCSI disk, while system level
power management affects all devices, including the controller for the
SCSI disk.
For instance, issuing a START STOP UNIT command when a SCSI disk is
runtime suspended and resumed is fine: the command is translated to a
STANDBY IMMEDIATE command to spin down the ATA disk and to a VERIFY
command to wake it up. The SCSI disk runtime operations have no effect
on the ata port device used to connect the ATA disk. However, for
system suspend/resume operations, the ATA port used to connect the
device will also be suspended and resumed, with the resume operation
requiring re-validating the device link and the device itself. In this
case, issuing a VERIFY command to spinup the disk must be done before
starting to revalidate the device, when the ata port is being resumed.
In such case, we must not allow the SCSI disk driver to issue START STOP
UNIT commands.
Allow a low level driver to refine the SCSI disk start/stop management
by differentiating system and runtime cases with two new SCSI device
flags: manage_system_start_stop and manage_runtime_start_stop. These new
flags replace the current manage_start_stop flag. Drivers setting the
manage_start_stop are modifed to set both new flags, thus preserving the
existing start/stop management behavior. For backward compatibility, the
old manage_start_stop sysfs device attribute is kept as a read-only
attribute showing a value of 1 for devices enabling both new flags and 0
otherwise.
Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is no direct device ancestry defined between an ata_device and
its scsi device which prevents the power management code from correctly
ordering suspend and resume operations. Create such ancestry with the
ata device as the parent to ensure that the scsi device (child) is
suspended before the ata device and that resume handles the ata device
before the scsi device.
The parent-child (supplier-consumer) relationship is established between
the ata_port (parent) and the scsi device (child) with the function
device_add_link(). The parent used is not the ata_device as the PM
operations are defined per port and the status of all devices connected
through that port is controlled from the port operations.
The device link is established with the new function
ata_scsi_slave_alloc(), and this function is used to define the
->slave_alloc callback of the scsi host template of all ata drivers.
Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
|
|
Whenever an ATA adapter driver is removed (e.g. rmmod),
ata_port_detach() is called repeatedly for all the adapter ports to
remove (unload) the devices attached to the port and delete the port
device itself. Removing of devices is done using libata EH with the
ATA_PFLAG_UNLOADING port flag set. This causes libata EH to execute
ata_eh_unload() which disables all devices attached to the port.
ata_port_detach() finishes by calling scsi_remove_host() to remove the
scsi host associated with the port. This function will trigger the
removal of all scsi devices attached to the host and in the case of
disks, calls to sd_shutdown() which will flush the device write cache
and stop the device. However, given that the devices were already
disabled by ata_eh_unload(), the synchronize write cache command and
start stop unit commands fail. E.g. running "rmmod ahci" with first
removing sd_mod results in error messages like:
ata13.00: disable device
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] Stopping disk
sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Fix this by removing all scsi devices of the ata devices connected to
the port before scheduling libata EH to disable the ATA devices.
Fixes: 720ba12620ee ("[PATCH] libata-hp: update unload-unplug")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The function ata_port_request_pm() checks the port flag
ATA_PFLAG_PM_PENDING and calls ata_port_wait_eh() if this flag is set to
ensure that power management operations for a port are not scheduled
simultaneously. However, this flag check is done without holding the
port lock.
Fix this by taking the port lock on entry to the function and checking
the flag under this lock. The lock is released and re-taken if
ata_port_wait_eh() needs to be called. The two WARN_ON() macros checking
that the ATA_PFLAG_PM_PENDING flag was cleared are removed as the first
call is racy and the second one done without holding the port lock.
Fixes: 5ef41082912b ("ata: add ata port system PM callbacks")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
|
|
On certain SATA controllers, softreset fails after wakeup from S2RAM with
the message "softreset failed (1st FIS failed)", sometimes resulting in
drives not being detected again. With the increased timeout, this issue
is avoided. Instead, "softreset failed (device not ready)" is now
logged 1-2 times; this later failure seems to cause fewer problems
however, and the drives are detected reliably once they've spun up and
the probe is retried.
The issue was observed with the primary SATA controller of the QNAP
TS-453B, which is an "Intel Corporation Celeron/Pentium Silver Processor
SATA Controller [8086:31e3] (rev 06)" integrated in the Celeron J4125 CPU,
and the following drives:
- Seagate IronWolf ST12000VN0008
- Seagate IronWolf ST8000NE0004
The SATA controller seems to be more relevant to this issue than the
drives, as the same drives are always detected reliably on the secondary
SATA controller on the same board (an ASMedia 106x) without any "softreset
failed" errors even without the increased timeout.
Fixes: e7d3ef13d52a ("libata: change drive ready wait after hard reset to 5s")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
For REPORT SUPPORTED OPERATION CODES command, the service action field is
defined as bits 0-4 in the second byte in the CDB. Bits 5-7 in the second
byte are reserved.
Only look at the service action field in the second byte when determining
if the MAINTENANCE IN opcode is a REPORT SUPPORTED OPERATION CODES command.
This matches how we only look at the service action field in the second
byte when determining if the SERVICE ACTION IN(16) opcode is a READ
CAPACITY(16) command (reserved bits 5-7 in the second byte are ignored).
Fixes: 7b2030942859 ("libata: Add support for SCT Write Same")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
The PATA child node schema is missing constraints to prevent unknown
properties. As none of the users of this common binding extend the child
nodes with additional properties, adding "additionalProperties: false"
here is sufficient.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix EL2 Stage-1 MMIO mappings where a random address was used
- Fix SMCCC function number comparison when the SVE hint is set
RISC-V:
- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of a missing extension
- Fix ISA_EXT register handling in get-reg-list test
- Fix filtering of AIA registers in get-reg-list test
x86:
- Fixes for TSC_AUX virtualization
- Stop zapping page tables asynchronously, since we don't zap them as
often as before"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Do not use user return MSR support for virtualized TSC_AUX
KVM: SVM: Fix TSC_AUX virtualization setup
KVM: SVM: INTERCEPT_RDTSCP is never intercepted anyway
KVM: x86/mmu: Stop zapping invalidated TDP MMU roots asynchronously
KVM: x86/mmu: Do not filter address spaces in for_each_tdp_mmu_root_yield_safe()
KVM: x86/mmu: Open code leaf invalidation from mmu_notifier
KVM: riscv: selftests: Selectively filter-out AIA registers
KVM: riscv: selftests: Fix ISA_EXT register handling in get-reg-list
RISC-V: KVM: Fix riscv_vcpu_get_isa_ext_single() for missing extensions
RISC-V: KVM: Fix KVM_GET_REG_LIST API for ISA_EXT registers
KVM: selftests: Assert that vasprintf() is successful
KVM: arm64: nvhe: Ignore SVE hint in SMCCC function ID
KVM: arm64: Properly return allocated EL2 VA from hyp_alloc_private_va_range()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix the "bytes" output of the per_cpu stat file
The tracefs/per_cpu/cpu*/stats "bytes" was giving bogus values as the
accounting was not accurate. It is suppose to show how many used
bytes are still in the ring buffer, but even when the ring buffer was
empty it would still show there were bytes used.
- Fix a bug in eventfs where reading a dynamic event directory (open)
and then creating a dynamic event that goes into that diretory screws
up the accounting.
On close, the newly created event dentry will get a "dput" without
ever having a "dget" done for it. The fix is to allocate an array on
dir open to save what dentries were actually "dget" on, and what ones
to "dput" on close.
* tag 'trace-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Remember what dentries were created on dir open
ring-buffer: Fix bytes info in per_cpu buffer stats
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A collection of regression fixes, bug fixes, and some small cleanups
to the Compute Express Link code.
The regressions arrived in the v6.5 dev cycle and missed the v6.6
merge window due to my personal absences this cycle. The most
important fixes are for scenarios where the CXL subsystem fails to
parse valid region configurations established by platform firmware.
This is important because agreement between OS and BIOS on the CXL
configuration is fundamental to implementing "OS native" error
handling, i.e. address translation and component failure
identification.
Other important fixes are a driver load error when the BIOS lets the
Linux PCI core handle AER events, but not CXL memory errors.
The other fixex might have end user impact, but for now are only known
to trigger in our test/emulation environment.
Summary:
- Fix multiple scenarios where platform firmware defined regions fail
to be assembled by the CXL core.
- Fix a spurious driver-load failure on platforms that enable OS
native AER, but not OS native CXL error handling.
- Fix a regression detecting "poison" commands when "security"
commands are also defined.
- Fix a cxl_test regression with the move to centralize CXL port
register enumeration in the CXL core.
- Miscellaneous small fixes and cleanups"
* tag 'cxl-fixes-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/acpi: Annotate struct cxl_cxims_data with __counted_by
cxl/port: Fix cxl_test register enumeration regression
cxl/region: Refactor granularity select in cxl_port_setup_targets()
cxl/region: Match auto-discovered region decoders by HPA range
cxl/mbox: Fix CEL logic for poison and security commands
cxl/pci: Replace host_bridge->native_aer with pcie_aer_is_native()
PCI/AER: Export pcie_aer_is_native()
cxl/pci: Fix appropriate checking for _OSC while handling CXL RAS registers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an invalid usage of __free(kfree) leading to kfreeing an
ERR_PTR()
- fix an irq domain leak in gpio-tb10x
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: fix an invalid __free() usage
gpio: tb10x: Fix an error handling path in tb10x_gpio_probe()
MAINTAINERS: gpio-regmap: make myself a maintainer of it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes, 10 of which pertain to post-6.5 issues. The other three
are cc:stable"
* tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
proc: nommu: fix empty /proc/<pid>/maps
filemap: add filemap_map_order0_folio() to handle order0 folio
proc: nommu: /proc/<pid>/maps: release mmap read lock
mm: memcontrol: fix GFP_NOFS recursion in memory.high enforcement
pidfd: prevent a kernel-doc warning
argv_split: fix kernel-doc warnings
scatterlist: add missing function params to kernel-doc
selftests/proc: fixup proc-empty-vm test after KSM changes
revert "scripts/gdb/symbols: add specific ko module load command"
selftests: link libasan statically for tests with -fsanitize=address
task_work: add kerneldoc annotation for 'data' argument
mm: page_alloc: fix CMA and HIGHATOMIC landing on the wrong buddy list
sh: mm: re-add lost __ref to ioremap_prot() to fix modpost warning
|
|
Pull smb client fixes from Steve French:
"Six smb3 client fixes, including three for stable, from the SMB
plugfest (testing event) this week:
- Reparse point handling fix (found when investigating dir
enumeration when fifo in dir)
- Fix excessive thread creation for dir lease cleanup
- UAF fix in negotiate path
- remove duplicate error message mapping and fix confusing warning
message
- add dynamic trace point to improve debugging RDMA connection
attempts"
* tag '6.6-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix confusing debug message
smb: client: handle STATUS_IO_REPARSE_TAG_NOT_HANDLED
smb3: remove duplicate error mapping
cifs: Fix UAF in cifs_demultiplex_thread()
smb3: do not start laundromat thread when dir leases disabled
smb3: Add dynamic trace points for RDMA (smbdirect) reconnect
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A set of I2C driver fixes. Mostly fixing resource leaks or sanity
checks"
* tag 'i2c-for-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Correct return value check for xiic_reinit()
i2c: mux: gpio: Add missing fwnode_handle_put()
i2c: mux: demux-pinctrl: check the return value of devm_kstrdup()
i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low
i2c: i801: unregister tco_pdev in i801_probe() error path
|
|
The code was accidentally mixing new and old style macros, update the
macros used to remove an unused function warning whilst building with
no PM enabled in the config.
Fixes: ace6d1448138 ("mfd: cs42l43: Add support for cs42l43 core driver")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/all/20230822114914.340359-1-ckeepax@opensource.cirrus.com/
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix lockdep, fix a boot failure, fix some build warnings, fix document
links, and some cleanups"
* tag 'loongarch-fixes-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
docs/zh_CN/LoongArch: Update the links of ABI
docs/LoongArch: Update the links of ABI
LoongArch: Don't inline kasan_mem_to_shadow()/kasan_shadow_to_mem()
kasan: Cleanup the __HAVE_ARCH_SHADOW_MAP usage
LoongArch: Set all reserved memblocks on Node#0 at initialization
LoongArch: Remove dead code in relocate_new_kernel
LoongArch: Use _UL() and _ULL()
LoongArch: Fix some build warnings with W=1
LoongArch: Fix lockdep static memory detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix potential string buffer overflow in hypervisor user-defined
certificates handling
- Update defconfigs
* tag 's390-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cert_store: fix string length handling
s390: update defconfigs
|
|
Pull iomap fixes from Darrick Wong:
- Return EIO on bad inputs to iomap_to_bh instead of BUGging, to deal
less poorly with block device io racing with block device resizing
- Fix a stale page data exposure bug introduced in 6.6-rc1 when
unsharing a file range that is not in the page cache
* tag 'iomap-6.6-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: convert iomap_unshare_iter to use large folios
iomap: don't skip reading in !uptodate folios when unsharing a range
iomap: handle error conditions more gracefully in iomap_to_bh
|
|
HEAD
KVM/riscv fixes for 6.6, take #1
- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of a missing extension
- Fix ISA_EXT register handling in get-reg-list test
- Fix filtering of AIA registers in get-reg-list test
|
|
When the TSC_AUX MSR is virtualized, the TSC_AUX value is swap type "B"
within the VMSA. This means that the guest value is loaded on VMRUN and
the host value is restored from the host save area on #VMEXIT.
Since the value is restored on #VMEXIT, the KVM user return MSR support
for TSC_AUX can be replaced by populating the host save area with the
current host value of TSC_AUX. And, since TSC_AUX is not changed by Linux
post-boot, the host save area can be set once in svm_hardware_enable().
This eliminates the two WRMSR instructions associated with the user return
MSR support.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <d381de38eb0ab6c9c93dda8503b72b72546053d7.1694811272.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The checks for virtualizing TSC_AUX occur during the vCPU reset processing
path. However, at the time of initial vCPU reset processing, when the vCPU
is first created, not all of the guest CPUID information has been set. In
this case the RDTSCP and RDPID feature support for the guest is not in
place and so TSC_AUX virtualization is not established.
This continues for each vCPU created for the guest. On the first boot of
an AP, vCPU reset processing is executed as a result of an APIC INIT
event, this time with all of the guest CPUID information set, resulting
in TSC_AUX virtualization being enabled, but only for the APs. The BSP
always sees a TSC_AUX value of 0 which probably went unnoticed because,
at least for Linux, the BSP TSC_AUX value is 0.
Move the TSC_AUX virtualization enablement out of the init_vmcb() path and
into the vcpu_after_set_cpuid() path to allow for proper initialization of
the support after the guest CPUID information has been set.
With the TSC_AUX virtualization support now in the vcpu_set_after_cpuid()
path, the intercepts must be either cleared or set based on the guest
CPUID input.
Fixes: 296d5a17e793 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <4137fbcb9008951ab5f0befa74a0399d2cce809a.1694811272.git.thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
svm_recalc_instruction_intercepts() is always called at least once
before the vCPU is started, so the setting or clearing of the RDTSCP
intercept can be dropped from the TSC_AUX virtualization support.
Extracted from a patch by Tom Lendacky.
Cc: stable@vger.kernel.org
Fixes: 296d5a17e793 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Stop zapping invalidate TDP MMU roots via work queue now that KVM
preserves TDP MMU roots until they are explicitly invalidated. Zapping
roots asynchronously was effectively a workaround to avoid stalling a vCPU
for an extended during if a vCPU unloaded a root, which at the time
happened whenever the guest toggled CR0.WP (a frequent operation for some
guest kernels).
While a clever hack, zapping roots via an unbound worker had subtle,
unintended consequences on host scheduling, especially when zapping
multiple roots, e.g. as part of a memslot. Because the work of zapping a
root is no longer bound to the task that initiated the zap, things like
the CPU affinity and priority of the original task get lost. Losing the
affinity and priority can be especially problematic if unbound workqueues
aren't affined to a small number of CPUs, as zapping multiple roots can
cause KVM to heavily utilize the majority of CPUs in the system, *beyond*
the CPUs KVM is already using to run vCPUs.
When deleting a memslot via KVM_SET_USER_MEMORY_REGION, the async root
zap can result in KVM occupying all logical CPUs for ~8ms, and result in
high priority tasks not being scheduled in in a timely manner. In v5.15,
which doesn't preserve unloaded roots, the issues were even more noticeable
as KVM would zap roots more frequently and could occupy all CPUs for 50ms+.
Consuming all CPUs for an extended duration can lead to significant jitter
throughout the system, e.g. on ChromeOS with virtio-gpu, deleting memslots
is a semi-frequent operation as memslots are deleted and recreated with
different host virtual addresses to react to host GPU drivers allocating
and freeing GPU blobs. On ChromeOS, the jitter manifests as audio blips
during games due to the audio server's tasks not getting scheduled in
promptly, despite the tasks having a high realtime priority.
Deleting memslots isn't exactly a fast path and should be avoided when
possible, and ChromeOS is working towards utilizing MAP_FIXED to avoid the
memslot shenanigans, but KVM is squarely in the wrong. Not to mention
that removing the async zapping eliminates a non-trivial amount of
complexity.
Note, one of the subtle behaviors hidden behind the async zapping is that
KVM would zap invalidated roots only once (ignoring partial zaps from
things like mmu_notifier events). Preserve this behavior by adding a flag
to identify roots that are scheduled to be zapped versus roots that have
already been zapped but not yet freed.
Add a comment calling out why kvm_tdp_mmu_invalidate_all_roots() can
encounter invalid roots, as it's not at all obvious why zapping
invalidated roots shouldn't simply zap all invalid roots.
Reported-by: Pattara Teerapong <pteerapong@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Yiwei Zhang<zzyiwei@google.com>
Cc: Paul Hsia <paulhsia@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230916003916.2545000-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
All callers except the MMU notifier want to process all address spaces.
Remove the address space ID argument of for_each_tdp_mmu_root_yield_safe()
and switch the MMU notifier to use __for_each_tdp_mmu_root_yield_safe().
Extracted out of a patch by Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Fix UAPI stddef.h to avoid C++-ism (Alexey Dobriyan)
- Fix harmless UAPI stddef.h header guard endif (Alexey Dobriyan)
* tag 'hardening-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
uapi: stddef.h: Fix __DECLARE_FLEX_ARRAY for C++
uapi: stddef.h: Fix header guard location
|
|
Pull xfs fixes from Chandan Babu:
- Fix an integer overflow bug when processing an fsmap call
- Fix crash due to CPU hot remove event racing with filesystem mount
operation
- During read-only mount, XFS does not allow the contents of the log to
be recovered when there are one or more unrecognized rcompat features
in the primary superblock, since the log might have intent items
which the kernel does not know how to process
- During recovery of log intent items, XFS now reserves log space
sufficient for one cycle of a permanent transaction to execute.
Otherwise, this could lead to livelocks due to non-availability of
log space
- On an fs which has an ondisk unlinked inode list, trying to delete a
file or allocating an O_TMPFILE file can cause the fs to the shutdown
if the first inode in the ondisk inode list is not present in the
inode cache. The bug is solved by explicitly loading the first inode
in the ondisk unlinked inode list into the inode cache if it is not
already cached
A similar problem arises when the uncached inode is present in the
middle of the ondisk unlinked inode list. This second bug is
triggered when executing operations like quotacheck and bulkstat. In
this case, XFS now reads in the entire ondisk unlinked inode list
- Enable LARP mode only on recent v5 filesystems
- Fix a out of bounds memory access in scrub
- Fix a performance bug when locating the tail of the log during
mounting a filesystem
* tag 'xfs-6.6-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: use roundup_pow_of_two instead of ffs during xlog_find_tail
xfs: only call xchk_stats_merge after validating scrub inputs
xfs: require a relatively recent V5 filesystem for LARP mode
xfs: make inode unlinked bucket recovery work with quotacheck
xfs: load uncached unlinked inodes into memory on demand
xfs: reserve less log space when recovering log intent items
xfs: fix log recovery when unknown rocompat bits are set
xfs: reload entire unlinked bucket lists
xfs: allow inode inactivation during a ro mount log recovery
xfs: use i_prev_unlinked to distinguish inodes that are not on the unlinked list
xfs: remove CPU hotplug infrastructure
xfs: remove the all-mounts list
xfs: use per-mount cpumask to track nonempty percpu inodegc lists
xfs: fix an agbno overflow in __xfs_getfsmap_datadev
xfs: fix per-cpu CIL structure aggregation racing with dying cpus
xfs: fix select in config XFS_ONLINE_SCRUB_STATS
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct cxl_cxims_data.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linux-cxl@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230922175319.work.096-kees@kernel.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The cxl_test unit test environment models a CXL topology for
sysfs/user-ABI regression testing. It uses interface mocking via the
"--wrap=" linker option to redirect cxl_core routines that parse
hardware registers with versions that just publish objects, like
devm_cxl_enumerate_decoders().
Starting with:
Commit 19ab69a60e3b ("cxl/port: Store the port's Component Register mappings in struct cxl_port")
...port register enumeration is moved into devm_cxl_add_port(). This
conflicts with the "cxl_test avoids emulating registers stance" so
either the port code needs to be refactored (too violent), or modified
so that register enumeration is skipped on "fake" cxl_test ports
(annoying, but straightforward).
This conflict has happened previously and the "check for platform
device" workaround to avoid instrusive refactoring was deployed in those
scenarios. In general, refactoring should only benefit production code,
test code needs to remain minimally instrusive to the greatest extent
possible.
This was missed previously because it may sometimes just cause warning
messages to be emitted, but it can also cause test failures. The
backport to -stable is only nice to have for clean cxl_test runs.
Fixes: 19ab69a60e3b ("cxl/port: Store the port's Component Register mappings in struct cxl_port")
Cc: stable@vger.kernel.org
Reported-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/169476525052.1013896.6235102957693675187.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Using the following code with libtracefs:
int dfd;
// create the directory events/kprobes/kp1
tracefs_kprobe_raw(NULL, "kp1", "schedule_timeout", "time=$arg1");
// Open the kprobes directory
dfd = tracefs_instance_file_open(NULL, "events/kprobes", O_RDONLY);
// Do a lookup of the kprobes/kp1 directory (by looking at enable)
tracefs_file_exists(NULL, "events/kprobes/kp1/enable");
// Now create a new entry in the kprobes directory
tracefs_kprobe_raw(NULL, "kp2", "schedule_hrtimeout", "expires=$arg1");
// Do another lookup to create the dentries
tracefs_file_exists(NULL, "events/kprobes/kp2/enable"))
// Close the directory
close(dfd);
What happened above, the first open (dfd) will call
dcache_dir_open_wrapper() that will create the dentries and up their ref
counts.
Now the creation of "kp2" will add another dentry within the kprobes
directory.
Upon the close of dfd, eventfs_release() will now do a dput for all the
entries in kprobes. But this is where the problem lies. The open only
upped the dentry of kp1 and not kp2. Now the close is decrementing both
kp1 and kp2, which causes kp2 to get a negative count.
Doing a "trace-cmd reset" which deletes all the kprobes cause the kernel
to crash! (due to the messed up accounting of the ref counts).
To solve this, save all the dentries that are opened in the
dcache_dir_open_wrapper() into an array, and use this array to know what
dentries to do a dput on in eventfs_release().
Since the dcache_dir_open_wrapper() calls dcache_dir_open() which uses the
file->private_data, we need to also add a wrapper around dcache_readdir()
that uses the cursor assigned to the file->private_data. This is because
the dentries need to also be saved in the file->private_data. To do this
create the structure:
struct dentry_list {
void *cursor;
struct dentry **dentries;
};
Which will hold both the cursor and the dentries. Some shuffling around is
needed to make sure that dcache_dir_open() and dcache_readdir() only see
the cursor.
Link: https://lore.kernel.org/linux-trace-kernel/20230919211804.230edf1e@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20230922163446.1431d4fa@gandalf.local.home
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ajay Kaher <akaher@vmware.com>
Fixes: 63940449555e7 ("eventfs: Implement eventfs lookup, read, open functions")
Reported-by: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The 'bytes' info in file 'per_cpu/cpu<X>/stats' means the number of
bytes in cpu buffer that have not been consumed. However, currently
after consuming data by reading file 'trace_pipe', the 'bytes' info
was not changed as expected.
# cat per_cpu/cpu0/stats
entries: 0
overrun: 0
commit overrun: 0
bytes: 568 <--- 'bytes' is problematical !!!
oldest event ts: 8651.371479
now ts: 8653.912224
dropped events: 0
read events: 8
The root cause is incorrect stat on cpu_buffer->read_bytes. To fix it:
1. When stat 'read_bytes', account consumed event in rb_advance_reader();
2. When stat 'entries_bytes', exclude the discarded padding event which
is smaller than minimum size because it is invisible to reader. Then
use rb_page_commit() instead of BUF_PAGE_SIZE at where accounting for
page-based read/remove/overrun.
Also correct the comments of ring_buffer_bytes_cpu() in this patch.
Link: https://lore.kernel.org/linux-trace-kernel/20230921125425.1708423-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: c64e148a3be3 ("trace: Add ring buffer stats to measure rate of events")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Unbreak the trip point update sysfs interface that has been broken
since the 6.3 cycle (Rafael Wysocki)"
* tag 'thermal-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: sysfs: Fix trip_point_hyst_store()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a general ACPI processor driver regression and an ia64 build
issue, both introduced recently.
Specifics:
- Fix recently introduced uninitialized memory access issue in the
ACPI processor driver (Michal Wilczynski)
- Fix ia64 build inadvertently broken by recent ACPI processor driver
changes, which is prudent to do for 6.6 even though ia64 support is
slated for removal in 6.7 (Ard Biesheuvel)"
* tag 'acpi-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Fix uninitialized access of buf in acpi_set_pdc_bits()
acpi: Provide ia64 dummy implementation of acpi_proc_quirk_mwait_check()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Small crop of relatively boring arm64 fixes for -rc3.
That's not to say we don't have any juicy bugs, however, it's just
that fixes for those are likely to come via -mm and -tip for a hugetlb
and an atomics issue respectively. I get left with the
documentation...
- Fix detection of "ClearBHB" and "Hinted Conditional Branch" features
- Fix broken wildcarding for Arm PMU MAINTAINERS entry
- Add missing documentation for userspace-visible ID register fields"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Document missing userspace visible fields in ID_AA64ISAR2_EL1
arm64/hbc: Document HWCAP2_HBC
arm64/sme: Include ID_AA64PFR1_EL1.SME in cpu-feature-registers.rst
arm64: cpufeature: Fix CLRBHB and BC detection
MAINTAINERS: Use wildcard pattern for ARM PMU headers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 rethunk fixes from Borislav Petkov:
"Fix the patching ordering between static calls and return thunks"
* tag 'x86_urgent_for_v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86,static_call: Fix static-call vs return-thunk
x86/alternatives: Remove faulty optimization
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix a kexec bug
- Fix an UML build bug
- Fix a handful of SRSO related bugs
- Fix a shadow stacks handling bug & robustify related code
* tag 'x86-urgent-2023-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/shstk: Add warning for shadow stack double unmap
x86/shstk: Remove useless clone error handling
x86/shstk: Handle vfork clone failure correctly
x86/srso: Fix SBPB enablement for spec_rstack_overflow=off
x86/srso: Don't probe microcode in a guest
x86/srso: Set CPUID feature bits independently of bug or mitigation status
x86/srso: Fix srso_show_state() side effect
x86/asm: Fix build of UML with KASAN
x86/mm, kexec, ima: Use memblock_free_late() from ima_free_kexec_buffer()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a PF_IDLE initialization bug that generated warnings on tiny-RCU"
* tag 'sched-urgent-2023-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kernel/sched: Modify initial boot task idle setup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"Fix a include/linux/atomic/atomic-arch-fallback.h breakage that
generated incorrect code, and fix a lockdep reporting race that may
result in lockups"
* tag 'locking-urgent-2023-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/seqlock: Do the lockdep annotation before locking in do_write_seqcount_begin_nested()
locking/atomic: scripts: fix fallback ifdeffery
|
|
Commit
7825451fa4dc ("static_call: Add call depth tracking support")
failed to realize the problem fixed there is not specific to call depth
tracking but applies to all return-thunk uses.
Move the fix to the appropriate place and condition.
Fixes: ee88d363d156 ("x86,static_call: Use alternative RET encoding")
Reported-by: David Kaplan <David.Kaplan@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
|
|
The following commit
095b8303f383 ("x86/alternative: Make custom return thunk unconditional")
made '__x86_return_thunk' a placeholder value. All code setting
X86_FEATURE_RETHUNK also changes the value of 'x86_return_thunk'. So
the optimization at the beginning of apply_returns() is dead code.
Also, before the above-mentioned commit, the optimization actually had a
bug It bypassed __static_call_fixup(), causing some raw returns to
remain unpatched in static call trampolines. Thus the 'Fixes' tag.
Fixes: d2408e043e72 ("x86/alternative: Optimize returns patching")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/16d19d2249d4485d8380fb215ffaae81e6b8119e.1693889988.git.jpoimboe@kernel.org
|
|
Merge a fix for recently introduced uninitialized memory access in the
ACPI processor driver from Michal Wilczynski.
* acpi-processor:
ACPI: processor: Fix uninitialized access of buf in acpi_set_pdc_bits()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"Follow-up fix for the unaccepted memory fix merged last week as part
of the first EFI fixes batch.
The unaccepted memory table needs to be accessible very early, even in
cases (such as crashkernels) where the direct map does not cover all
of DRAM, and so it is added to memblock explicitly, and subsequently
memblock_reserve()'d as before"
* tag 'efi-fixes-for-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/unaccepted: Make sure unaccepted table is mapped
|
|
Pull drm fixes from Dave Airlie:
"Ben Skeggs is stepping away from nouveau and Red Hat for personal
reasons, he'll be missed and we intend to fill the gaps in the
upcoming time with Danilo and Lyude stepping in for now.
Otherwise i915, nouveau, amdgpu with a few each and some misc spread
around.
MAINTAINERS:
- drop Ben as he retired from nouveau
core:
- drm_mm test fixes
fbdev:
- Kconfig fixes
ivpu:
- IRQ-handling fixes
meson:
- Fix memory leak in HDMI EDID code
nouveau:
- Correct type casting
- Fix memory leak in scheduler
- u_memcpya() fixes
i915:
- Prevent error pointer dereference
- Fix PMU busyness values when using GuC mode
amdgpu:
- MST fix
- Vbios part number reporting fix
- Fix a possible memory leak in an error case in the RAS code
- Fix low resolution modes on eDP
amdkfd:
- Fix GPU address for user queue wptr when GART is not at 0"
* tag 'drm-fixes-2023-09-22-2' of git://anongit.freedesktop.org/drm/drm:
MAINTAINERS: remove myself as nouveau maintainer
fbdev/sh7760fb: Depend on FB=y
drm/amdkfd: Use gpu_offset for user queue's wptr
drm/amd/display: fix the ability to use lower resolution modes on eDP
drm/amdgpu: fix a memory leak in amdgpu_ras_feature_enable
Revert "drm/amdgpu: Report vbios version instead of PN"
drm/amd/display: Fix MST recognizes connected displays as one
drm/virtio: clean out_fence on complete_submit
i915/pmu: Move execlist stats initialization to execlist specific setup
drm/i915/gt: Prevent error pointer dereference
drm/meson: fix memory leak on ->hpd_notify callback
accel/ivpu/40xx: Fix buttress interrupt handling
nouveau/u_memcpya: fix NULL vs error pointer bug
nouveau/u_memcpya: use vmemdup_user
drm/nouveau: sched: fix leaking memory of timedout job
drm/nouveau: fence: fix type cast warning in nouveau_fence_emit()
drm: fix up fbdev Kconfig defaults
drm/tests: Fix incorrect argument in drm_test_mm_insert_range
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a regression in sm2"
* tag 'v6.6-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sm2 - Fix crash caused by uninitialized context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"The most noteworthy change in here is the addition of Ilpo Järvinen as
co-maintainer of platform-drivers-x86. Ilpo will be helping me with
platform-drivers-x86 maintenance going forward and you can expect
pull-requests from Ilpo in the future.
Other then that there is a set of Intel SCU IPC fixes and a
thinkpad_acpi locking fix"
* tag 'platform-drivers-x86-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
MAINTAINERS: Add x86 platform drivers patchwork
MAINTAINERS: Add myself into x86 platform driver maintainers
platform/x86: thinkpad_acpi: Take mutex in hotkey_resume
platform/x86: intel_scu_ipc: Fail IPC send if still busy
platform/x86: intel_scu_ipc: Don't override scu in intel_scu_ipc_dev_simple_command()
platform/x86: intel_scu_ipc: Check status upon timeout in ipc_wait_for_interrupt()
platform/x86: intel_scu_ipc: Check status after timeout in busy_loop()
|
|
The error paths for xiic_reinit() return negative values on failure
and 0 on success - this error message therefore is triggered on
_success_ rather than failure. Correct the condition so it's only
shown on failure as intended.
Fixes: 8fa9c9388053 ("i2c: xiic: return value of xiic_reinit")
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
gpio_sim_make_line_names() returns NULL or ERR_PTR() so we must not use
__free(kfree) on the returned address. Split this function into two, one
that determines the size of the "gpio-line-names" array to allocate and
one that actually sets the names at correct offsets. The allocation and
assignment of the managed pointer happens in between.
Fixes: 3faf89f27aab ("gpio: sim: simplify code with cleanup helpers")
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Closes: https://lore.kernel.org/all/07c32bf1-6c1a-49d9-b97d-f0ae4a2b42ab@p183/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
