summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-02-29mac80211: dont call cfg80211 from ieee80211_send_deauth_disassocJohannes Berg
Instead of calling cfg80211 in ieee80211_send_deauth_disassoc() pass out the frame and call it from the caller. That saves the SKB allocation if we don't actually want to send the frame and enables us to make the ordering smarter in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29cfg80211: remove cookies from callbacksJohannes Berg
In "cfg80211: no cookies in cfg80211_send_XXX()" Holger Schurig removed the cookies in the calls from mac80211 to cfg80211, but the ones in the other direction were left in. Remove them now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29ipw2x00: remove ipw2100_rates_11b[]Stanislav Yakovlev
It's just a duplicate of ipw2100_bg_rates[]. Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29zd1211rw: wait between setting hash table and powering radio onFlorian Fainelli
I am running Debian testing kernel 3.1.0-1-amd64, using a 079b:0062 Sagem XG-76NA 802.11bg stick. Upon zd1211rw interface bringup (ifconfig wlan0 up) I get the following timeout: [ 950.330573] zd1211rw 1-3:1.0: phy2 [ 955.108510] zd1211rw 1-3:1.0: firmware version 4725 [ 955.148532] zd1211rw 1-3:1.0: zd1211b chip 079b:0062 v4810 high 00-19-70 AL2230_RF pa0 g--NS [snip] [ 955.204072] zd1211rw 1-3:1.0: error ioread32(CR_REG1): -110 A second ifconfig wlan0 up brings the interface up without problems. After a bit more debugging, the call trace is the following: [10241.028130] zd1211rw 1-3:1.0: zd_chip_lock_phy_regs: error ioread32(CR_REG1): -110 [10241.028140] zd1211rw 1-3:1.0: zd_switch_radio_on: failed to lock PHY regs [10241.028148] zd1211rw 1-3:1.0: zd_op_start: failed to set radio on Adding a 10 milliseconds delay between the call to set_mc_hash() and zd_chip_switch_radio_on() allows successful interface bringups in all cases and matches what the vendor driver did. Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27iwlwifi: fix IDI compilationEmmanuel Grumbach
This is a fixup for my: iwlwifi: kill iwl_bus.h Please fold them into one patch for upstream Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: update pci subsystem idWey-Yi Guy
Update the pci subsystem id and product name for 6005 series devices Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: one more sku added to 6x35 seriesWey-Yi Guy
Add new sku to 6x35 series Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: iwl-trans.h doesn't need all these includesEmmanuel Grumbach
We can use forward declaration for the relevant struct since they aren't dereferenced in the header file. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: document the operational modeEmmanuel Grumbach
Also add a might_sleep to enforce the context requirements. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: remove iwl_reset_traffic_log from sharedEmmanuel Grumbach
It is op_mode related Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: remove iwl_print_rx_config_cmd from sharedEmmanuel Grumbach
It is op_mode related Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: kill iwl_bus.hEmmanuel Grumbach
No one needs it any more Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: eeprom gets transport and not busEmmanuel Grumbach
This is temporary, but at least we can now throw the bus away and move the iwl_pci_{probe,remove} functions. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: move eeprom defines to iwl-eeprom.cEmmanuel Grumbach
They don't need to be in iwl-dev.h Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: remove a few dereferences to iwl_priv from the tansportEmmanuel Grumbach
The transport should not dereference the iwl_priv pointer. Remove a few of those. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: virtualize op_mode's fw_errorEmmanuel Grumbach
Export it as "nic_error" notification, the error handling will be in the op_mode. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: virtualize op_mode's set_hw_rf_killEmmanuel Grumbach
Export it as "hw_rf_kill" notification. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: virtualize op_mode's stop/start queueEmmanuel Grumbach
Export them as "queue_full" and "queue_not_full" notification. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: virtualize op_mode's rxEmmanuel Grumbach
This is the op_mode's Rx handler. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: virtualize op_mode's free skbEmmanuel Grumbach
This handler allows the transport layer to free an skb from the op_mode. This can happen when the driver is stopped while Tx packets are pending in the transport layer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: use sparse compliant __aligned__ attributeEmmanuel Grumbach
Sparse prefers __aligned(sizeof(void *)); Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: virtualize the op_modeEmmanuel Grumbach
Define the op_mode as an interface with its ops. All the functions of the op_mode are "private", but its ops is made public in iwl-op-mode.h. The drv object starts the op_mode by using the start function in the public ops. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: rename iwl_remove to iwl_op_mode_dvm_stopEmmanuel Grumbach
iwl_remove stops the wifi flows, so rename. Moreover, we can possibly stop the wifi flows even if the driver is statically compiled in the kernel, so remove the __devexit pragma. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: drv object can release its own memoryEmmanuel Grumbach
Move that code to the iwl-drv.c Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: introducing the drv object's flowsEmmanuel Grumbach
Fetch the fw and spawn the op_mode. The op_mode that we need to fetch is determined from the fw file. Since the fw is fetched very early in the init flow, we can determine what op_mode to spawn. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: move uCode flags handling to op_modeJohannes Berg
The uCode flags modification is op_mode dependent since the P2P config is an op-mode config. This also fixes P2P enabling: due to the uCode loading code shuffle moving the SKU check before the EEPROM was read it was always false and would always disable PAN/P2P. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: move content of iwl_probe to post fetch_fwEmmanuel Grumbach
This will allow to have different behavior depending on the fw. Different fw APIs require completely different implementation of the mac80211 APIs. Each of these implementations is called an op_mode. The current op_mode is called DVM which states for dual virtual MAC. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: parse_tlv functions set the fw_version stringEmmanuel Grumbach
struct iwl_fw contains a string that describe the fw. This string is now set by the iwl_parse_*_firmware. This string is later used to update the cfg80211 data. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27rt2800pci: Fix 'Error - MCU request failed' during initializationJakub Kicinski
Bring MCU operations during device initialization to sync with legacy driver. This should fix following error: phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27rt2800: Add documentation on MCU requestsJakub Kicinski
Add documentation on MCU communication, some of known commands and their arguments. Supplement command ids. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27iwlwifi: iwl-agn.h included twiceDanny Kukawka
drivers/net/wireless/iwlwifi/iwl-core.c included 'iwl-agn.h' twice, remove the duplicate. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27mac80211_hwsim: correctly line up a multiline printkAntonio Quartulli
The second line of a printk statement must line up to the opening bracket. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27mac80211: remove local_to_hwJohannes Berg
That's a lot longer than open-coding it and doesn't really add value, so just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27mac80211: fix sta_info_flush() return valueJohannes Berg
The comment for sta_info_flush() states "Returns the number of removed STA entries" but that isn't actually true. Consequently, the warning when a station is still around on interface removal can never trigger and this delayed finding the timer issue the previous patch fixed. Fix the return value here to make that warning useful again. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27mac80211: fix auth/assoc data & timer leakJohannes Berg
When removing an interface while it is in the process of authenticating or associating, we leak the auth_data or assoc_data, and leave the timer pending. The timer then crashes the system when it fires as its data is gone. Fix this by explicitly deleting all the data when the interface is removed. This uncovered another bug -- this problem should have been detected by the sta_info_flush() warning but that function doesn't ever return non-zero, I'll fix that in a separate patch. Reported-by: Hieu Nguyen <hieux.c.nguyen@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27brcm80211: fmac: use correct firmware filenameRafał Miłecki
Also don't use so generic BRCMF_USB_FW_NAME as we may need different firmwares in the future. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27brcm80211: fmac: fix a couple checking after dereference bugsDan Carpenter
There were two dereferencing before checking for NULL static checker complaints in this new file. The list cursor is never NULL so that check can be removed. I moved the other dereference after the check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27net/wireless: ipw2x00: Use IW_HANDLER macro from linux/wireless.hStanislav Yakovlev
Use IW_HANDLER macro in ipw2100.c to declare wireless handlers. Note: ipw2200.c already uses it. Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27mac80211: use proper sub_if_data on suspend pathJakub Kicinski
Use interface data from sta instead of invalid pointer to list head in calls to drv_sta_state. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Cleanup mci.cSujith Manoharan
Cleanup whitespace, fix indentation and coding style. Also remove debug messages that were flooding the log. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: MCI whitespace/debug cleanupSujith Manoharan
This patch fixes indentation and the general coding style in ar9003_mci.c. Also, minimize the amount of debug log output generated by MCI. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Remove HW revision checksSujith Manoharan
They are not needed since MCI will be enabled only for AR9462 v2.0 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Cleanup MCI reset routineSujith Manoharan
* Use a separate function to enable/disable OneStepLookAhead. * Remove unnecessary hardware SREV checks. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Modify ATH9K_BTCOEX_SUPPORTSujith Manoharan
ATH9K_BTCOEX_SUPPORT is now used by both ath9k and ath9k_htc to enable BT coexistence. Fix Kbuild to allow this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Remove ATH9K_HW_CAP_MCI checksSujith Manoharan
With the ability to remove BTCOEX support at compile time, these checks are no longer needed. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Remove ATH_BTCOEX_CFG_NONE checksSujith Manoharan
Since BTCOEX code can be compiled out cleanly now, remove these checks. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_htc: Use CONFIG_ATH9K_BTCOEX_SUPPORTSujith Manoharan
ath9k_htc can also make use of CONFIG_ATH9K_BTCOEX_SUPPORT to be compiled without BTCOEX support. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_htc: Init BTCOEX inside htc_drv_gpio.cSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_htc: Start/stop btcoex using a helperSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Use CONFIG_ATH9K_BTCOEX_SUPPORTSujith Manoharan
Make use of CONFIG_ATH9K_BTCOEX_SUPPORT in ath9k_hw to provide a clean way of compilation without BTCOEX support. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>