Age | Commit message (Collapse) | Author |
|
Normally, all channels have RX and TX queues, but this is not true if
modparam efx_separate_tx_channels=1 is used. In that cases, some
channels only have RX queues and others only TX queues (or more
preciselly, they have them allocated, but not initialized).
Fix efx_channel_has_tx_queues to return the correct value for this case
too.
This has been already done for sfc, do it also for sfc_siena.
Messages shown at probe time before the fix:
sfc 0000:03:00.0 ens6f0np0: MC command 0x82 inlen 544 failed rc=-22 (raw=0) arg=0
------------[ cut here ]------------
netdevice: ens6f0np0: failed to initialise TXQ -1
WARNING: CPU: 1 PID: 626 at drivers/net/ethernet/sfc/ef10.c:2393 efx_ef10_tx_init+0x201/0x300 [sfc]
[...] stripped
RIP: 0010:efx_ef10_tx_init+0x201/0x300 [sfc]
[...] stripped
Call Trace:
efx_init_tx_queue+0xaa/0xf0 [sfc]
efx_start_channels+0x49/0x120 [sfc]
efx_start_all+0x1f8/0x430 [sfc]
efx_net_open+0x5a/0xe0 [sfc]
__dev_open+0xd0/0x190
__dev_change_flags+0x1b3/0x220
dev_change_flags+0x21/0x60
[...] stripped
Messages shown at remove time before the fix:
sfc 0000:03:00.0 ens6f0np0: failed to flush 10 queues
sfc 0000:03:00.0 ens6f0np0: failed to flush queues
Fixes: 8700aff08984 ("sfc: fix channel allocation with brute force")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Tested-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
ipsec 2022-06-01
1) Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"
From Michal Kubecek.
2) Don't set IPv4 DF bit when encapsulating IPv6 frames below 1280 bytes.
From Maciej Żenczykowski.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: do not set IPv4 DF flag when encapsulating IPv6 frames <= 1280 bytes.
Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"
====================
Link: https://lore.kernel.org/r/20220601103349.2297361-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v5.19
First set of fixes for v5.19. Build fixes for iwlwifi and libertas, a
scheduling while atomic fix for rtw88 and use-after-free fix for
mac80211.
* tag 'wireless-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix use-after-free in chanctx code
wifi: rtw88: add a work to correct atomic scheduling warning of ::set_tim
wifi: iwlwifi: pcie: rename CAUSE macro
wifi: libertas: use variable-size data in assoc req/resp cmd
====================
Link: https://lore.kernel.org/r/20220601110741.90B28C385A5@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Dave Chinner:
"This update is largely bug fixes and cleanups for all the code merged
in the first pull request. The majority of them are to the new logged
attribute code, but there are also a couple of fixes for other log
recovery and memory leaks that have recently been found.
Summary:
- fix refcount leak in xfs_ifree()
- fix xfs_buf_cancel structure leaks in log recovery
- fix dquot leak after failed quota check
- fix a couple of problematic ASSERTS
- fix small aim7 perf regression in from new btree sibling validation
- clean up log incompat feature marking for new logged attribute
feature
- disallow logged attributes on legacy V4 filesystem formats.
- fix da state leak when freeing attr intents
- improve validation of the attr log items in recovery
- use slab caches for commonly used attr structures
- fix leaks of attr name/value buffer and reduce copying overhead
during intent logging
- remove some dead debug code from log recovery"
* tag 'xfs-5.19-for-linus-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (33 commits)
xfs: fix xfs_ifree() error handling to not leak perag ref
xfs: move xfs_attr_use_log_assist usage out of libxfs
xfs: move xfs_attr_use_log_assist out of xfs_log.c
xfs: warn about LARP once per mount
xfs: implement per-mount warnings for scrub and shrink usage
xfs: don't log every time we clear the log incompat flags
xfs: convert buf_cancel_table allocation to kmalloc_array
xfs: don't leak xfs_buf_cancel structures when recovery fails
xfs: refactor buffer cancellation table allocation
xfs: don't leak btree cursor when insrec fails after a split
xfs: purge dquots after inode walk fails during quotacheck
xfs: assert in xfs_btree_del_cursor should take into account error
xfs: don't assert fail on perag references on teardown
xfs: avoid unnecessary runtime sibling pointer endian conversions
xfs: share xattr name and value buffers when logging xattr updates
xfs: do not use logged xattr updates on V4 filesystems
xfs: Remove duplicate include
xfs: reduce IOCB_NOWAIT judgment for retry exclusive unaligned DIO
xfs: Remove dead code
xfs: fix typo in comment
...
|
|
Use plain 255 instead, which also avoid introducing an additional header
dependency on <linux/types.h>
Fixes: 26859240e4ee ("txhash: Add socket option to control TX hash rethink behavior")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20220531094345.13801-1-tklauser@distanz.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit a670ff578f1f ("drm/msm/dpu: always use mdp device to scale
bandwidth") we fully moved interconnect stuff to the DPU driver. This
had no change for sc7180 but _did_ have an impact for other SoCs. It
made them match the sc7180 scheme.
Unfortunately, the sc7180 scheme seems like it was a bit broken.
Specifically the interconnect needs to be on for more than just the
DPU driver's AXI bus. In the very least it also needs to be on for the
DSI driver's AXI bus. This can be seen fairly easily by doing this on
a ChromeOS sc7180-trogdor class device:
set_power_policy --ac_screen_dim_delay=5 --ac_screen_off_delay=10
sleep 10
cd /sys/bus/platform/devices/ae94000.dsi/power
echo on > control
When you do that, you'll get a warning splat in the logs about
"gcc_disp_hf_axi_clk status stuck at 'off'".
One could argue that perhaps what I have done above is "illegal" and
that it can't happen naturally in the system because in normal system
usage the DPU is pretty much always on when DSI is on. That being
said:
* In official ChromeOS builds (admittedly a 5.4 kernel with backports)
we have seen that splat at bootup.
* Even though we don't use "autosuspend" for these components, we
don't use the "put_sync" variants. Thus plausibly the DSI could stay
"runtime enabled" past when the DPU is enabled. Techncially we
shouldn't do that if the DPU's suspend ends up yanking our clock.
Let's change things such that the "bare minimum" request for the
interconnect happens in the mdss driver again. That means that all of
the children can assume that the interconnect is on at the minimum
bandwidth. We'll then let the DPU request the higher amount that it
wants.
It should be noted that this isn't as hacky of a solution as it might
initially appear. Specifically:
* Since MDSS and DPU individually get their own references to the
interconnect then the framework will actually handle aggregating
them. The two drivers are _not_ clobbering each other.
* When the Qualcomm interconnect driver aggregates it takes the max of
all the peaks. Thus having MDSS request a peak, as we're doing here,
won't actually change the total interconnect bandwidth (it won't be
added to the request for the DPU). This perhaps explains why the
"average" requested in MDSS was historically 0 since that one
_would_ be added in.
NOTE also that in the downstream ChromeOS 5.4 and 5.15 kernels, we're
also seeing some RPMH hangs that are addressed by this fix. These
hangs are showing up in the field and on _some_ devices with enough
stress testing of suspend/resume. Specifically right at suspend time
with a stack crawl that looks like this (from chromeos-5.15 tree):
rpmh_write_batch+0x19c/0x240
qcom_icc_bcm_voter_commit+0x210/0x420
qcom_icc_set+0x28/0x38
apply_constraints+0x70/0xa4
icc_set_bw+0x150/0x24c
dpu_runtime_resume+0x50/0x1c4
pm_generic_runtime_resume+0x30/0x44
__genpd_runtime_resume+0x68/0x7c
genpd_runtime_resume+0x12c/0x20c
__rpm_callback+0x98/0x138
rpm_callback+0x30/0x88
rpm_resume+0x370/0x4a0
__pm_runtime_resume+0x80/0xb0
dpu_kms_enable_commit+0x24/0x30
msm_atomic_commit_tail+0x12c/0x630
commit_tail+0xac/0x150
drm_atomic_helper_commit+0x114/0x11c
drm_atomic_commit+0x68/0x78
drm_atomic_helper_disable_all+0x158/0x1c8
drm_atomic_helper_suspend+0xc0/0x1c0
drm_mode_config_helper_suspend+0x2c/0x60
msm_pm_prepare+0x2c/0x40
pm_generic_prepare+0x30/0x44
genpd_prepare+0x80/0xd0
device_prepare+0x78/0x17c
dpm_prepare+0xb0/0x384
dpm_suspend_start+0x34/0xc0
We don't completely understand all the mechanisms in play, but the
hang seemed to come and go with random factors. It's not terribly
surprising that the hang is gone after this patch since the line of
code that was failing is no longer present in the kernel.
Fixes: a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth")
Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # RB3 (sdm845) and
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/487884/
Link: https://lore.kernel.org/r/20220531160059.v2.1.Ie7f6d4bf8cce28131da31a43354727e417cae98d@changeid
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
The phys_enc->wb_idx is dereferencing before null checking, so move
it after checking.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: d7d0e73f7de33 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/487606/
Link: https://lore.kernel.org/r/1653877196-23114-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Eliminate the follow clang warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:544:33: warning: variable
‘mode’ set but not used [-Wunused-but-set-variable].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Fixes: 3177589c6e93("drm/msm/dpu: encoder: drop unused mode_fixup callback")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/487136/
Link: https://lore.kernel.org/r/20220524081413.37895-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Commit 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in
encoder") added dsc_common_mode variable which was set to zero but then
again programmed, so drop the superfluous init.
Fixes: 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder")
Reported-by: kernel test robot <yujie.liu@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/487208/
Link: https://lore.kernel.org/r/20220525073912.2706505-1-vkoul@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
dp_ctrl_reset_irq_ctrl()
dp_catalog_ctrl_reset() will software reset DP controller. But it will
not reset programmable registers to default value. DP driver still have
to clear mask bits to interrupt status registers to disable interrupts
after software reset of controller.
At current implementation, dp_ctrl_reset_irq_ctrl() will software reset dp
controller but did not call dp_catalog_ctrl_enable_irq(false) to clear hpd
related interrupt mask bits to disable hpd related interrupts due to it
mistakenly think hpd related interrupt mask bits will be cleared by software
reset of dp controller automatically. This mistake may cause system to crash
during suspending procedure due to unexpected irq fired and trigger event
thread to access dp controller registers with controller clocks are disabled.
This patch fixes system crash during suspending problem by removing "enable"
flag condition checking at dp_ctrl_reset_irq_ctrl() so that hpd related
interrupt mask bits are cleared to prevent unexpected from happening.
Changes in v2:
-- add more details commit text
Changes in v3:
-- add synchrons_irq()
-- add atomic_t suspended
Changes in v4:
-- correct Fixes's commit ID
-- remove synchrons_irq()
Changes in v5:
-- revise commit text
Changes in v6:
-- add event_lock to protect "suspended"
Changes in v7:
-- delete "suspended" flag
Fixes: 989ebe7bc446 ("drm/msm/dp: do not initialize phy until plugin interrupt received")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/486591/
Link: https://lore.kernel.org/r/1652804494-19650-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"A new driver represents the bulk of the changes and then we get the
usual small fixes.
New driver:
- Renesas RZN1 rtc
Drivers:
- sun6i: Add nvmem support"
* tag 'rtc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: mxc: Silence a clang warning
rtc: rzn1: Fix a variable type
rtc: rzn1: Fix error code in probe
rtc: rzn1: Avoid mixing variables
rtc: ftrtc010: Fix error handling in ftrtc010_rtc_probe
rtc: mt6397: check return value after calling platform_get_resource()
rtc: rzn1: fix platform_no_drv_owner.cocci warning
rtc: gamecube: Add missing iounmap in gamecube_rtc_read_offset_from_sram
rtc: meson: Fix email address in MODULE_AUTHOR
rtc: simplify the return expression of rx8025_set_offset()
rtc: pcf85063: Add a compatible entry for pca85073a
dt-binding: pcf85063: Add an entry for pca85073a
MAINTAINERS: Add myself as maintainer of the RZN1 RTC driver
rtc: rzn1: Add oscillator offset support
rtc: rzn1: Add alarm support
rtc: rzn1: Add new RTC driver
dt-bindings: rtc: rzn1: Describe the RZN1 RTC
rtc: sun6i: Add NVMEM provider
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Only clean ups and no functional change this cycle. A couple of yaml
conversions of the DT bindings, and a couple of code cleanups"
* tag 'i3c/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
MAINTAINERS: rectify entries for some i3c drivers after dt conversion
i3c: master: svc: fix returnvar.cocci warning
i3c/master: simplify the return expression of i3c_hci_remove()
dt-bindings: i3c: Convert snps,dw-i3c-master to DT schema
dt-bindings: i3c: Convert cdns,i3c-master to DT schema
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM core's dm_table_supports_poll to return false if target has no
data devices.
- Fix DM verity target so that it cannot be switched to a different DM
target type (e.g. dm-linear) via DM table reload.
* tag 'for-5.19/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity: set DM_TARGET_IMMUTABLE feature flag
dm table: fix dm_table_supports_poll to return false if no data devices
|
|
Change the of_device_get_match_data() cast to (uintptr_t)
to silence the following clang warning:
drivers/rtc/rtc-mxc.c:315:19: warning: cast to smaller integer type 'enum imx_rtc_type' from 'const void *' [-Wvoid-pointer-to-enum-cast]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: ba7aa63000f2 ("rtc: mxc: use of_device_get_match_data")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220526011459.1167197-1-festevam@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Not much from the power-supply subsystem this time around, since I was
busy most of the cycle. This also contains some fixes that I
originally planned to send for 5.18. Apart from this there is nothing
noteworthy.
Power-supply core:
- init power_supply_info struct to zero
Drivers:
- bq27xxx: expose data for uncalibrated battery
- bq24190-charger: use pm_runtime_resume_and_get
- ab8500_fg: allocate wq in probe
- axp288_fuel_gauge: drop BIOS version from 'T3 MRD' quirk
- axp288_fuel_gauge: modify 'T3 MRD' quirk to also fix 'One Mix 1'"
* tag 'for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: bq24190_charger: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
power: supply: bq27xxx: expose battery data when CI=1
power: supply: ab8500_fg: Allocate wq in probe
power: supply: axp288_fuel_gauge: Drop BIOS version check from "T3 MRD" DMI quirk
power: supply: axp288_fuel_gauge: Fix battery reporting on the One Mix 1
power: supply: core: Initialize struct to zero
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add MediaTek MT8186 support
- Add Mediatek MT7986 reset-controller support
- Add i.MX93 support
- Add watchdog driver for Sunplus SP7021
- Add SC8180X and SC8280XP compatibles
- Add Renesas RZ/N1 Watchdog driver and support for RZ/N1
- rzg2l_wdt improvements and fixes
- Several other improvements and fixes
* tag 'linux-watchdog-5.19-rc1' of git://www.linux-watchdog.org/linux-watchdog: (38 commits)
watchdog: ts4800_wdt: Fix refcount leak in ts4800_wdt_probe
dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4
watchdog: Add Renesas RZ/N1 Watchdog driver
dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
watchdog: wdat_wdt: Stop watchdog when uninstalling module
watchdog: wdat_wdt: Stop watchdog when rebooting the system
watchdog: wdat_wdt: Using the existing function to check parameter timeout
dt-bindings: watchdog: da9062: add watchdog timeout mode
dt-bindings: watchdog: renesas,wdt: Document RZ/G2UL SoC
watchdog: iTCO_wdt: Using existing macro define covers more scenarios
watchdog: rti-wdt: Fix pm_runtime_get_sync() error checking
dt-bindings: watchdog: Add SC8180X and SC8280XP compatibles
watchdog: rti_wdt: Fix calculation and evaluation of preset heartbeat
dt-bindings: watchdog: uniphier: Use unevaluatedProperties
watchdog: sp805: disable watchdog on remove
watchdog: da9063: optionally disable watchdog during suspend
dt-bindings: mfd: da9063: watchdog: add suspend disable option
dt-bindings: watchdog: sunxi: clarify clock support
dt-bindings: watchdog: sunxi: fix F1C100s compatible
watchdog: Add watchdog driver for Sunplus SP7021
...
|
|
Pull vfio updates from Alex Williamson:
- Improvements to mlx5 vfio-pci variant driver, including support for
parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API to use
vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA ownership
(Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and kvm
association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
* tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits)
vfio: remove VFIO_GROUP_NOTIFY_SET_KVM
vfio/pci: Add driver_managed_dma to the new vfio_pci drivers
vfio: Do not manipulate iommu dma_owner for fake iommu groups
vfio/pci: Move the unused device into low power state with runtime PM
vfio/pci: Virtualize PME related registers bits and initialize to zero
vfio/pci: Change the PF power state to D0 before enabling VFs
vfio/pci: Invalidate mmaps and block the access in D3hot power state
vfio: Change struct vfio_group::container_users to a non-atomic int
vfio: Simplify the life cycle of the group FD
vfio: Fully lock struct vfio_group::container
vfio: Split up vfio_group_get_device_fd()
vfio: Change struct vfio_group::opened from an atomic to bool
vfio: Add missing locking for struct vfio_group::kvm
kvm/vfio: Fix potential deadlock problem in vfio
include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead
vfio/pci: Use the struct file as the handle not the vfio_group
kvm/vfio: Remove vfio_group from kvm
vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()
vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()
vfio: Remove vfio_external_group_match_file()
...
|
|
Commit 4bd69ecfa672 ("dt-bindings: i3c: Convert cdns,i3c-master to DT
schema") and commit 6742ca620bd9 ("dt-bindings: i3c: Convert
snps,dw-i3c-master to DT schema") convert some i3c dt-bindings to yaml,
but miss to adjust its reference in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about
broken references.
Repair these file references in I3C DRIVER FOR CADENCE I3C MASTER IP and
I3C DRIVER FOR SYNOPSYS DESIGNWARE.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220601074212.19984-1-lukas.bulwahn@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull more erofs updates from Gao Xiang:
"This is a follow-up to the main updates, including some fixes of
fscache mode related to compressed inodes and a cachefiles tracepoint.
There is also a patch to fix an unexpected decompression strategy
change due to a cleanup in the past. All the fixes are quite small.
Apart from these, documentation is also updated for a better
description of recent new features.
In addition, this has some trivial cleanups without actual code logic
changes, so I could have a more recent codebase to work on folios and
avoiding the PG_error page flag for the next cycle.
Summary:
- Leave compressed inodes unsupported in fscache mode for now
- Avoid crash when using tracepoint cachefiles_prep_read
- Fix `backmost' behavior due to a recent cleanup
- Update documentation for better description of recent new features
- Several decompression cleanups w/o logical change"
* tag 'erofs-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix 'backmost' member of z_erofs_decompress_frontend
erofs: simplify z_erofs_pcluster_readmore()
erofs: get rid of label `restart_now'
erofs: get rid of `struct z_erofs_collection'
erofs: update documentation
erofs: fix crash when enable tracepoint cachefiles_prep_read
erofs: leave compressed inodes unsupported in fscache mode for now
|
|
Pull ksmbd server updates from Steve French:
- rdma (smbdirect) fixes, cleanup and optimizations
- crediting (flow control) fix for mounts from Windows client
- ACL fix
- Windows client query dir fix
- write validation fix
- cleanups
* tag '5.19-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: smbd: relax the count of sges required
ksmbd: fix outstanding credits related bugs
ksmbd: smbd: fix connection dropped issue
ksmbd: Fix some kernel-doc comments
ksmbd: fix wrong smbd max read/write size check
ksmbd: add smbd max io size parameter
ksmbd: handle smb2 query dir request for OutputBufferLength that is too small
ksmbd: smbd: handle multiple Buffer descriptors
ksmbd: smbd: change the return value of get_sg_list
ksmbd: smbd: simplify tracking pending packets
ksmbd: smbd: introduce read/write credits for RDMA read/write
ksmbd: smbd: change prototypes of RDMA read/write related functions
ksmbd: validate length in smb2_write()
ksmbd: fix reference count leak in smb_check_perm_dacl()
|
|
In AFS, a directory is handled as a file that the client downloads and
parses locally for the purposes of performing lookup and getdents
operations. The in-kernel afs filesystem has a number of functions that
do this.
A directory file is arranged as a series of 2K blocks divided into
32-byte slots, where a directory entry occupies one or more slots, plus
each block starts with one or more metadata blocks.
When parsing a block, if the last slots are occupied by a dirent that
occupies more than a single slot and the file position points at a slot
that's not the initial one, the logic in afs_dir_iterate_block() that
skips over it won't advance the file pointer to the end of it. This
will cause an infinite loop in getdents() as it will keep retrying that
block and failing to advance beyond the final entry.
Fix this by advancing the file pointer if the next entry will be beyond
it when we skip a block.
This was found by the generic/676 xfstest but can also be triggered with
something like:
~/xfstests-dev/src/t_readdir_3 /xfstest.test/z 4000 1
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lore.kernel.org/r/165391973497.110268.2939296942213894166.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Quite a large number of conversions this time around, courtesy of Uwe
who has been working tirelessly on these. No drivers of the legacy API
are left at this point, so as a next step the old API can be removed.
Support is added for a few new devices such as the Xilinx AXI timer-
based PWMs and the PWM IP found on Sunplus SoCs.
Other than that, there's a number of fixes, cleanups and optimizations"
* tag 'pwm/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (43 commits)
pwm: pwm-cros-ec: Add channel type support
dt-bindings: google,cros-ec-pwm: Add the new -type compatible
dt-bindings: Add mfd/cros_ec definitions
pwm: Document that the pinstate of a disabled PWM isn't reliable
pwm: twl-led: Implement .apply() callback
pwm: lpc18xx: Implement .apply() callback
pwm: mediatek: Implement .apply() callback
pwm: lpc32xx: Implement .apply() callback
pwm: tegra: Implement .apply() callback
pwm: stmpe: Implement .apply() callback
pwm: sti: Implement .apply() callback
pwm: pwm-mediatek: Add support for MediaTek Helio X10 MT6795
dt-bindings: pwm: pwm-mediatek: Add documentation for MT6795 SoC
pwm: tegra: Optimize period calculation
pwm: renesas-tpu: Improve precision of period and duty_cycle calculation
pwm: renesas-tpu: Improve maths to compute register settings
pwm: renesas-tpu: Rename variables to match the usual naming
pwm: renesas-tpu: Implement .apply() callback
pwm: renesas-tpu: Make use of devm functions
pwm: renesas-tpu: Make use of dev_err_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"This corrects the check for irq_of_parse_and_map() failures in the
Qualcomm SMD driver and fixes unregistration and a couple of double
free in the virtio rpmsg driver"
* tag 'rpmsg-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: qcom_smd: Fix returning 0 if irq_of_parse_and_map() fails
rpmsg: virtio: Fix the unregistration of the device rpmsg_ctrl
rpmsg: virtio: Fix possible double free in rpmsg_virtio_add_ctrl_dev()
rpmsg: virtio: Fix possible double free in rpmsg_probe()
rpmsg: qcom_smd: Fix irq_of_parse_and_map() return value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"This fixes a race condition in the user space interface for starting
and stopping remote processors, it makes the ELF loader properly skip
zero memsz segments and it cleans up the debugfs tracefile code a bit
by not checking for errors.
It introduces support for controlling the audio DSP on Qualcomm
MSM8226, as well as audio and compute DSPs on Qualcomm SC8280XP.
It makes it possible to specify the firmware path for Mediatek's
remote processors, fixes a double free in the SCP driver and addresses
an issue with the SRAM initialization on MT8195.
Lastly it deprecates the custom ELF loader in the iMX remoteproc
driver, in favor of using the shared one"
* tag 'rproc-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (21 commits)
dt-bindings: remoteproc: mediatek: Add optional memory-region to mtk,scp
dt-bindings: remoteproc: mediatek: Make l1tcm reg exclusive to mt819x
dt-bindings: remoteproc: st,stm32-rproc: Fix phandle-array parameters description
remoteproc: imx_rproc: Support i.MX93
dt-bindings: remoteproc: imx_rproc: Support i.MX93
remoteproc: qcom: pas: Add MSM8226 ADSP support
dt-bindings: remoteproc: qcom: pas: Add MSM8226 adsp
remoteproc: mediatek: Allow reading firmware-name from DT
dt-bindings: remoteproc: mediatek: Add firmware-name property
remoteproc: qcom: pas: Add sc8280xp remoteprocs
dt-bindings: remoteproc: qcom: pas: Add sc8280xp adsp and nsp pair
dt-bindings: remoteproc: mediatek: Add interrupts property to mtk,scp
remoteproc: imx_rproc: Ignore create mem entry for resource table
remoteproc: core: Move state checking to remoteproc_core
remoteproc: core: Remove state checking before calling rproc_boot()
remoteproc: imx_dsp_rproc: Make rsc_table optional
remoteproc: imx_dsp_rproc: use common rproc_elf_load_segments
remoteproc: elf_loader: skip segment with memsz as zero
remoteproc: mtk_scp: Fix a potential double free
remoteproc: Don't bother checking the return value of debugfs_create*
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of fixes that came in during the merge window: a driver fix
for spurious timeouts in the fsi driver and an improvement to make the
core display error messages for transfer_one_message() to help people
debug things"
* tag 'spi-fix-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: core: Display return code when failing to transfer message
spi: fsi: Fix spurious timeout
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull pcmcia updates from Dominik Brodowski:
"A few odd cleanups and fixes, including a Kconfig fix to add a
required dependency on MIPS"
* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: Use platform_get_irq() to get the interrupt
pcmcia: db1xxx_ss: restrict to MIPS_DB1XXX boards
drivers/pcmcia: Fix typo in comment
|
|
io_fixed_fd_install() can grab uring_lock in the slot allocation path
when called from io-wq, and then call into io_install_fixed_file(),
which will lock it again. Pull all locking out of
io_install_fixed_file() into io_fixed_fd_install().
Fixes: 1339f24b336db ("io_uring: allow allocated fixed files for openat/openat2")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/64116172a9d0b85b85300346bb280f3657aafc26.1654087283.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The docs on creating an input device driver have an example in which
button_dev is a pointer to an input_dev struct. However, in two code
snippets below, button_dev is used as if it is not a pointer. Make these
occurrences of button_dev reflect that it is a pointer.
Signed-off-by: Nelson Penn <nelsonapenn@protonmail.com>
Link: https://lore.kernel.org/r/20220522194953.12097-1-nelsonapenn@protonmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
In the Rust for Linux patch series, Jonathan Corbet requested [1] that
we avoid binary assets (such as the logo), possibly by recreating
them in SVG format.
However, it turns out there is no SVG version of the Linux logo
in the kernel tree yet, only a GIF one from the pre-v2.0.0 days.
This patch fixes that by adding a SVG version of the Linux logo,
which we could then use in the Rust for Linux documentation and
other similar places.
This is a vector re-illustration by Garrett LeSage of the original
logo by Larry Ewing, plus cleanups by IFo Hancroft.
The file was imported as-is from:
https://github.com/garrett/Tux/blob/ecd40de64250ea2b24c849e901c3297ad01e54f6/tux.svg
The stated license in the repository is:
> Public domain http://creativecommons.org/publicdomain/zero/1.0/
>
> ...but, if anyone asks:
>
> Tux was originally made by Larry Ewing in the Gimp, re-illustrated
> in vector by Garrett LeSage, using Inkscape and refined and
> cleaned up by IFo Hancroft.
Here, the acknowledgement requirement has been made mandatory to
match the wording of the existing GIF logo in `COPYING-logo`.
Both Garrett LeSage and IFo Hancroft gave their permission [2,3]
to use their re-illustration with the license as given in
the `COPYING-logo` file.
Link: https://lore.kernel.org/lkml/87fspk1xoc.fsf@meer.lwn.net/ [1]
Link: https://lore.kernel.org/lkml/YgFsD7zBZyVqyF+F@battlestation/ [2]
Link: https://lore.kernel.org/lkml/CAFfNkxV=DmRJL1Oqm3w9YzBYcNLSAG3Ss8pih9ZVwh_E-Fbw+Q@mail.gmail.com/ [3]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20220528153132.8636-2-ojeda@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Having assets in the top-level `Documentation` directory can make
it harder to find the documents one needs, especially if we want
to add more of them later on.
Instead, create a new `images` folder inside it that is used
to hold assets such as logos.
In addition, update the reference in `scripts/spdxcheck-test.sh`.
Link: https://lore.kernel.org/lkml/8735hicoy7.fsf@meer.lwn.net/
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20220528153132.8636-1-ojeda@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This index.rst was added in commit
39443104c7d3 docs: blockdev: convert to ReST
It appears that the title from the RapidIO index page was copied. This
title does not match the content of this directory. Change it to match.
Signed-off-by: Joel Colledge <joel.colledge@linbit.com>
Link: https://lore.kernel.org/r/20220530142849.717-1-joel.colledge@linbit.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
One of the changes in Sphinx 5.0.0 [1] says [sic]:
5.0.0 final
- #10474: language does not accept None as it value.
The default value of language becomes to 'en' now.
[1]: https://www.sphinx-doc.org/en/master/changes.html#release-5-0-0-released-may-30-2022
It results in a new warning from Sphinx 5.0.0 [sic]:
WARNING: Invalid configuration value found: 'language = None'.
Update your configuration to a valid langauge code. Falling
back to 'en' (English).
Silence the warning by using 'en'.
It works with all the Sphinx versions required for building
kernel documentation (1.7.9 or later).
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/bd0c2ddc-2401-03cb-4526-79ca664e1cbe@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The tcf_ct_flow_table_fill_tuple_ipv6() function is supposed to return
false on failure. It should not return negatives because that means
succes/true.
Fixes: fcb6aa86532c ("act_ct: Support GRE offload")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Link: https://lore.kernel.org/r/YpYFnbDxFl6tQ3Bn@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When passing interface parameter to ping -6:
$ ping -6 ::11:141:84:9 -I eth2
Results in:
PING ::11:141:84:10(::11:141:84:10) from ::11:141:84:9 eth2: 56 data bytes
ping: sendmsg: Invalid argument
ping: sendmsg: Invalid argument
Initialize the fl6's outgoing interface (OIF) before triggering
ip6_datagram_send_ctl. Don't wipe fl6 after ip6_datagram_send_ctl() as
changes in fl6 that may happen in the function are overwritten explicitly.
Update comment accordingly.
Fixes: 13651224c00b ("net: ping6: support setting basic SOL_IPV6 options via cmsg")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220531084544.15126-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Create a new macsec device but not get reference to real_dev. That can
not ensure that real_dev is freed after macsec. That will trigger the
UAF bug for real_dev as following:
==================================================================
BUG: KASAN: use-after-free in macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662
Call Trace:
...
macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662
dev_get_iflink+0x73/0xe0 net/core/dev.c:637
default_operstate net/core/link_watch.c:42 [inline]
rfc2863_policy+0x233/0x2d0 net/core/link_watch.c:54
linkwatch_do_dev+0x2a/0x150 net/core/link_watch.c:161
Allocated by task 22209:
...
alloc_netdev_mqs+0x98/0x1100 net/core/dev.c:10549
rtnl_create_link+0x9d7/0xc00 net/core/rtnetlink.c:3235
veth_newlink+0x20e/0xa90 drivers/net/veth.c:1748
Freed by task 8:
...
kfree+0xd6/0x4d0 mm/slub.c:4552
kvfree+0x42/0x50 mm/util.c:615
device_release+0x9f/0x240 drivers/base/core.c:2229
kobject_cleanup lib/kobject.c:673 [inline]
kobject_release lib/kobject.c:704 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x1c8/0x540 lib/kobject.c:721
netdev_run_todo+0x72e/0x10b0 net/core/dev.c:10327
After commit faab39f63c1f ("net: allow out-of-order netdev unregistration")
and commit e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"), we
can add dev_hold_track() in macsec_dev_init() and dev_put_track() in
macsec_free_netdev() to fix the problem.
Fixes: 2bce1ebed17d ("macsec: fix refcnt leak in module exit routine")
Reported-by: syzbot+d0e94b65ac259c29ce7a@syzkaller.appspotmail.com
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/r/20220531074500.1272846-1-william.xuanziyang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The context bus is a "dummy" bus that contains struct devices that
correspond to IOMMU contexts assigned through Host1x to processes.
Even when host1x itself is built as a module, the bus is registered
in built-in code so that the built-in ARM SMMU driver is able to
reference it.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The is_valid_offset() function returns success/true if the call to
validate_and_get_cpt_blkaddr() fails.
Fixes: ecad2ce8c48f ("octeontx2-af: cn10k: Add mailbox to configure reassembly timeout")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YpXDrTPb8qV01JSP@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In ieee80211_vif_use_reserved_context(), when we have an
old context and the new context's replace_state is set to
IEEE80211_CHANCTX_REPLACE_NONE, we free the old context
in ieee80211_vif_use_reserved_reassign(). Therefore, we
cannot check the old_ctx anymore, so we should set it to
NULL after this point.
However, since the new_ctx replace state is clearly not
IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do
anything else in this function and can just return to
avoid accessing the freed old_ctx.
Cc: stable@vger.kernel.org
Fixes: 5bcae31d9cb1 ("mac80211: implement multi-vif in-place reservations")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220601091926.df419d91b165.I17a9b3894ff0b8323ce2afdb153b101124c821e5@changeid
|
|
Guard ns_targets in struct bond_params by CONFIG_IPV6, which could save
256 bytes if IPv6 not configed. Also add this protection for function
bond_is_ip6_target_ok() and bond_get_targets_ip6().
Remove the IS_ENABLED() check for bond_opts[] as this will make
BOND_OPT_NS_TARGETS uninitialized if CONFIG_IPV6 not enabled. Add
a dummy bond_option_ns_ip6_targets_set() for this situation.
Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20220531063727.224043-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
A few more fixes that came in during the merge window - nothing
huge here, there is one core fix for DPCM from Pierre but mostly
driver changes.
|
|
We should set the pci driver data in probe instead of the vdpa device
adding callback. Otherwise if no vDPA device is created we will lose
the pointer to the management device.
Fixes: 6b5df347c6482 ("vDPA/ifcvf: implement management netlink framework for ifcvf")
Tested-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220524055557.1938-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Support HW offloaded filtering of MAC/VLAN packets.
To allow that, we add a handler to handle VLAN configurations coming
through the control VQ. Two operations are supported.
1. Adding VLAN - in this case, an entry will be added to the RX flow
table that will allow the combination of the MAC/VLAN to be
forwarded to the TIR.
2. Removing VLAN - will remove the entry from the flow table,
effectively blocking such packets from going through.
Currently the control VQ does not propagate changes to the MAC of the
VLAN device so we always use the MAC of the parent device.
Examples:
1. Create vlan device:
$ ip link add link ens1 name ens1.8 type vlan id 8
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220411122942.225717-4-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
The flow counter has been introduced in early versions of the driver to
aid in debugging. It is no longer needed and can harm performance.
Remove it.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220411122942.225717-2-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Laurent reported the enclosed report [1]
This bug triggers with following coditions:
0) Kernel built with CONFIG_DEBUG_PREEMPT=y
1) A new passive FastOpen TCP socket is created.
This FO socket waits for an ACK coming from client to be a complete
ESTABLISHED one.
2) A socket operation on this socket goes through lock_sock()
release_sock() dance.
3) While the socket is owned by the user in step 2),
a retransmit of the SYN is received and stored in socket backlog.
4) At release_sock() time, the socket backlog is processed while
in process context.
5) A SYNACK packet is cooked in response of the SYN retransmit.
6) -> tcp_rtx_synack() is called in process context.
Before blamed commit, tcp_rtx_synack() was always called from BH handler,
from a timer handler.
Fix this by using TCP_INC_STATS() & NET_INC_STATS()
which do not assume caller is in non preemptible context.
[1]
BUG: using __this_cpu_add() in preemptible [00000000] code: epollpep/2180
caller is tcp_rtx_synack.part.0+0x36/0xc0
CPU: 10 PID: 2180 Comm: epollpep Tainted: G OE 5.16.0-0.bpo.4-amd64 #1 Debian 5.16.12-1~bpo11+1
Hardware name: Supermicro SYS-5039MC-H8TRF/X11SCD-F, BIOS 1.7 11/23/2021
Call Trace:
<TASK>
dump_stack_lvl+0x48/0x5e
check_preemption_disabled+0xde/0xe0
tcp_rtx_synack.part.0+0x36/0xc0
tcp_rtx_synack+0x8d/0xa0
? kmem_cache_alloc+0x2e0/0x3e0
? apparmor_file_alloc_security+0x3b/0x1f0
inet_rtx_syn_ack+0x16/0x30
tcp_check_req+0x367/0x610
tcp_rcv_state_process+0x91/0xf60
? get_nohz_timer_target+0x18/0x1a0
? lock_timer_base+0x61/0x80
? preempt_count_add+0x68/0xa0
tcp_v4_do_rcv+0xbd/0x270
__release_sock+0x6d/0xb0
release_sock+0x2b/0x90
sock_setsockopt+0x138/0x1140
? __sys_getsockname+0x7e/0xc0
? aa_sk_perm+0x3e/0x1a0
__sys_setsockopt+0x198/0x1e0
__x64_sys_setsockopt+0x21/0x30
do_syscall_64+0x38/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Laurent Fasnacht <laurent.fasnacht@proton.ch>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20220530213713.601888-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Missing proper sanitization for nft_set_desc_concat_parse().
2) Missing mutex in nf_tables pre_exit path.
3) Possible double hook unregistration from clean_net path.
4) Missing FLOWI_FLAG_ANYSRC flag in flowtable route lookup.
Fix incorrect source and destination address in case of NAT.
Patch from wenxu.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: flowtable: fix nft_flow_route source address for nat case
netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag
netfilter: nf_tables: double hook unregistration in netns path
netfilter: nf_tables: hold mutex on netns pre_exit path
netfilter: nf_tables: sanitize nft_set_desc_concat_parse()
====================
Link: https://lore.kernel.org/r/20220531215839.84765-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In qdisc_run_end(), the spin_unlock() only has store-release semantic,
which guarantees all earlier memory access are visible before it. But
the subsequent test_bit() has no barrier semantics so may be reordered
ahead of the spin_unlock(). The store-load reordering may cause a packet
stuck problem.
The concurrent operations can be described as below,
CPU 0 | CPU 1
qdisc_run_end() | qdisc_run_begin()
. | .
----> /* may be reorderd here */ | .
| . | .
| spin_unlock() | set_bit()
| . | smp_mb__after_atomic()
---- test_bit() | spin_trylock()
. | .
Consider the following sequence of events:
CPU 0 reorder test_bit() ahead and see MISSED = 0
CPU 1 calls set_bit()
CPU 1 calls spin_trylock() and return fail
CPU 0 executes spin_unlock()
At the end of the sequence, CPU 0 calls spin_unlock() and does nothing
because it see MISSED = 0. The skb on CPU 1 has beed enqueued but no one
take it, until the next cpu pushing to the qdisc (if ever ...) will
notice and dequeue it.
This patch fix this by adding one explicit barrier. As spin_unlock() and
test_bit() ordering is a store-load ordering, a full memory barrier
smp_mb() is needed here.
Fixes: a90c57f2cedd ("net: sched: fix packet stuck problem for lockless qdisc")
Signed-off-by: Guoju Fang <gjfang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220528101628.120193-1-gjfang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.19-2022-05-26-2:
amdgpu:
- Update fdinfo to the common drm format
UAPI:
- Add VM_NOALLOC GPUVM attribute to prevent buffers for going into the MALL
Add AMDGPU_GEM_CREATE_DISCARDABLE flag to create buffers that can be discarded on eviction
Mesa code which uses these: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16466
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220526202546.66860-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.19-2022-05-26:
amdgpu:
- Link training fixes
- DPIA fixes
- Misc code cleanups
- Aux fixes
- Hotplug fixes
- More FP clean up
- Misc GFX9/10 fixes
- Fix a possible memory leak in SMU shutdown
- SMU 13 updates
- RAS fixes
- TMZ fixes
- GC 11 updates
- SMU 11 metrics fixes
- Fix coverage blend mode for overlay plane
- Note DDR vs LPDDR memory
- Fuzz fix for CS IOCTL
- Add new PCI DID
amdkfd:
- Clean up hive setup
- Misc fixes
radeon:
- Fix a possible NULL pointer dereference
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220526200641.64097-1-alexander.deucher@amd.com
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add support for 'dacl' and 'sacl' attributes
Bugfixes and Cleanups:
- Fixes for reporting mapping errors
- Fixes for memory allocation errors
- Improve warning message when locks are lost
- Update documentation for the nfs4_unique_id parameter
- Add an explanation of NFSv4 client identifiers
- Ensure the i_size attribute is written to the fscache storage
- Fix freeing uninitialized nfs4_labels
- Better handling when xprtrdma bc_serv is NULL
- Mark qualified async operations as MOVEABLE tasks"
* tag 'nfs-for-5.19-1' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4.1 mark qualified async operations as MOVEABLE tasks
xprtrdma: treat all calls not a bcall when bc_serv is NULL
NFSv4: Fix free of uninitialized nfs4_label on referral lookup.
NFS: Pass i_size to fscache_unuse_cookie() when a file is released
Documentation: Add an explanation of NFSv4 client identifiers
NFS: update documentation for the nfs4_unique_id parameter
NFS: Improve warning message when locks are lost.
NFSv4.1: Enable access to the NFSv4.1 'dacl' and 'sacl' attributes
NFSv4: Add encoders/decoders for the NFSv4.1 dacl and sacl attributes
NFSv4: Specify the type of ACL to cache
NFSv4: Don't hold the layoutget locks across multiple RPC calls
pNFS/files: Fall back to I/O through the MDS on non-fatal layout errors
NFS: Further fixes to the writeback error handling
NFSv4/pNFS: Do not fail I/O when we fail to allocate the pNFS layout
NFS: Memory allocation failures are not server fatal errors
NFS: Don't report errors from nfs_pageio_complete() more than once
NFS: Do not report flush errors in nfs_write_end()
NFS: Don't report ENOSPC write errors twice
NFS: fsync() should report filesystem errors over EINTR/ERESTARTSYS
NFS: Do not report EINTR/ERESTARTSYS as mapping errors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've refactored the existing atomic write support
implemented by in-memory operations to have storing data in disk
temporarily, which can give us a benefit to accept more atomic writes.
At the same time, we removed the existing volatile write support.
We've also revisited the file pinning and GC flows and found some
corner cases which contributeed abnormal system behaviours.
As usual, there're several minor code refactoring for readability,
sanity check, and clean ups.
Enhancements:
- allow compression for mmap files in compress_mode=user
- kill volatile write support
- change the current atomic write way
- give priority to select unpinned section for foreground GC
- introduce data read/write showing path info
- remove unnecessary f2fs_lock_op in f2fs_new_inode
Bug fixes:
- fix the file pinning flow during checkpoint=disable and GCs
- fix foreground and background GCs to select the right victims and
get free sections on time
- fix GC flags on defragmenting pages
- avoid an infinite loop to flush node pages
- fix fallocate to use file_modified to update permissions
consistently"
* tag 'f2fs-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (40 commits)
f2fs: fix to tag gcing flag on page during file defragment
f2fs: replace F2FS_I(inode) and sbi by the local variable
f2fs: add f2fs_init_write_merge_io function
f2fs: avoid unneeded error handling for revoke_entry_slab allocation
f2fs: allow compression for mmap files in compress_mode=user
f2fs: fix typo in comment
f2fs: make f2fs_read_inline_data() more readable
f2fs: fix to do sanity check for inline inode
f2fs: fix fallocate to use file_modified to update permissions consistently
f2fs: don't use casefolded comparison for "." and ".."
f2fs: do not stop GC when requiring a free section
f2fs: keep wait_ms if EAGAIN happens
f2fs: introduce f2fs_gc_control to consolidate f2fs_gc parameters
f2fs: reject test_dummy_encryption when !CONFIG_FS_ENCRYPTION
f2fs: kill volatile write support
f2fs: change the current atomic write way
f2fs: don't need inode lock for system hidden quota
f2fs: stop allocating pinned sections if EAGAIN happens
f2fs: skip GC if possible when checkpoint disabling
f2fs: give priority to select unpinned section for foreground GC
...
|